A review of the nature, role, and function of dentin non-collagenous proteins. Part 1: proteoglycans and glycoproteins

Alkali-extracted proteins from the tooth dentin matrix as a mixture of bioactive molecules for cartilage repair and regeneration

Introduction

Dentin matrix extracted protein (DMEP) is a mixture of proteins extracted from the organic matrix of a natural demineralized dentin matrix that is rich in a variety of growth factors. However, the effect of DMEP on cartilage regeneration is unclear. The aim of this study was to investigate the efficacy of DMEP extracted via a novel alkali conditioning method in promoting cartilage regeneration.

Methods

Alkali-extracted DMEP (a-DMEP) was obtained from human dentin fragments using pH 10 bicarbonate buffer. The concentration of chondrogenesis-related growth factors in a-DMEP was measured via enzyme-linked immunosorbent assay (ELISA). Human bone marrow mesenchymal stem cells (hBMMSCs) in pellet form were induced with a-DMEP. Alcian blue and Safranin O staining were performed to detect cartilage matrix formation, and quantitative real-time polymerase chain reaction (qRT-PCR) was used to assess chondrogenic-related gene expression in the pellets. Rabbit articular osteochondral defects were implanted with collagen and a-DMEP. Cartilage regeneration was assessed with histological staining 4 weeks after surgery.

Results

Compared with traditional neutral-extracted DMEP, a-DMEP significantly increased the levels of transforming growth factor beta 1(TGF-β1), insulin-like growth factor-1(IGF-1) and basic fibroblast growth factor (bFGF). After coculture with hBMMSC pellets, a-DMEP significantly promoted the expression of the collagen type II alpha 1(COL2A1) and aggrecan (ACAN) genes and the formation of cartilage extracellular matrix in cell pellets. Moreover, compared with equivalent amounts of exogenous human recombinant TGF-β1, a-DMEP had a stronger chondrogenic ability. In vivo, a-DMEP induced osteochondral regeneration with hyaline cartilage-like structures.

Conclusions

Our results showed that a-DMEP, a compound of various proteins derived from natural tissues, is a promising material for cartilage repair and regeneration.

Approaches to vital pulp therapies

Tooth decay, which leads to pulpal inflammation due to the pulp's response to bacterial components and byproducts is the most common infectious disease. The main goals of clinical management are to eliminate sources of infection, to facilitate healing by regulating inflammation indental tissue, and to replace lost tissues. A variety of novel approaches from tissue engineering based on stem cells, bioactive molecules, and extracellular matrix-like scaffold structures to therapeutic applications, or a combination of all these are present in the literature. Shortcomings of existing conventional materials for pulp capping and the novel approches aiming to preserve pulp vitality highligted the need for developing new targeted dental materials. This review looks at the novel approches for vital pulp treatments after briefly addresing the conventional vital pulp treatment as well as the regenerative and self defense capabilities of the pulp. A narrative review focusing on the current and future approaches for pulp preservation was performed after surveying the relevant papers on vital pulp therapies including pulp capping, pulpotomy, and potential approaches for facilitating dentin-pulp complex regeneration in PubMed, Medline, and Scopus databases.

Application of Biocompatible Scaffolds in Stem-Cell-Based Dental Tissue Engineering

Tissue engineering as an important field in regenerative medicine is a promising therapeutic approach to replace or regenerate injured tissues. It consists of three vital steps including the selection of suitable cells, formation of 3d scaffolds, and adding growth factors. Mesenchymal stem cells (MSCs) and embryonic stem cells (ESCs) are mentioned as two main sources for this approach that have been used for the treatment of various types of disorders. However, the main focus of literature in the field of dental tissue engineering is on utilizing MSCs. On the other hand, biocompatible scaffolds play a notable role in this regenerative process which is mentioned to be harmless with acceptable osteoinductivity. Their ability in inhibiting inflammatory responses also makes them powerful tools. Indeed, stem cell functions should be supported by biomaterials acting as scaffolds incorporated with biological signals. Naturally derived polymeric scaffolds and synthetically engineered polymeric/ceramic scaffolds are two main types of scaffolds regarding their materials that are defined further in this review. Various strategies of tissue bioengineering can affect the regeneration of dentin-pulp complex, periodontium regeneration, and whole teeth bioengineering. In this regard, in vivo/ex vivo experimental models have been developed recently in order to perform preclinical studies of dental tissue engineering which make it more transferable to be used for clinic uses. This review summarizes dental tissue engineering through its different components. Also, strategies of tissue bioengineering and experimental models are introduced in order to provide a perspective of the potential roles of dental tissue engineering to be used for clinical aims.

Exploiting dentine matrix proteins in cell-free approaches for periradicular tissue engineering

The recent discovery of mesenchymal stem cells within periapical lesions (PL-MSC) has presented novel opportunities for managing periradicular diseases in adult teeth by way of enhancing tissue regeneration. This discovery coincides with the current paradigm shift toward biologically driven treatment strategies in endodontics, which have typically been reserved for non-vital immature permanent teeth. One such approach that shows promise is utilizing local endogenous non-collagenous dentine extracellular matrix components (dECM) to recruit and upregulate the intrinsic regenerative capacity of PL-MSCs in situ. At picogram levels, these morphogens have demonstrated tremendous ability to enhance the cellular activities in in vitro and in vivo animal studies that would otherwise be necessary for periradicular regeneration. Briefly, these include proliferation, viability, migration, differentiation, and mineralization. Therefore, topical application of dECMs during ortho- or retrograde root canal treatment could potentially enhance and sustain the regenerative mechanisms within diseased periapical tissues that are responsible for attaining favorable clinical and radiographic outcomes. This would provide many advantages when compared with conventional antimicrobial-only therapies for apical periodontitis (AP), which do not directly stimulate healing and have had stagnant success rates over the past five decades despite significant advances in operative techniques. The aim of this narrative review was to present the novel concept of exploiting endogenous dECMs as clinical tools for treating AP in mature permanent teeth. A large scope of literature was summarized to discuss the issues associated with conventional treatment modalities; current knowledge surrounding PL-MSCs; composition of the dECM; inductive potentials of dECM morphogens in other odontogenic stem cell niches; how treatment protocols can be adapted to take advantage of dECMs and PL-MSCs; and finally, the challenges currently impeding successful clinical translation alongside directions for future research.

In Vitro Mineralization of Collagen

Collagen mineralization is a biological process in many skeletal elements in the animal kingdom. Examples of these collagen-based skeletons are the siliceous spicules of glass sponges or the intrafibrillar hydroxyapatite platelets in vertebrates. The mineralization of collagen in vitro has gained interest for two reasons: understanding the processes behind bone formation and the synthesis of scaffolds for tissue engineering. In this paper, the efforts toward collagen mineralization in vitro are reviewed. First, general introduction toward collagen type I, the main component of the extracellular matrix in animals, is provided, followed by a brief overview of collagenous skeletons. Then, the in vitro mineralization of collagen is critically reviewed. Due to their biological abundance, hydroxyapatite and silica are the focus of this review. To a much lesser extent, also some efforts with other minerals are outlined. Combining all minerals and the suggested mechanisms for each mineral, a general mechanism for the intrafibrillar mineralization of collagen is proposed. This review concludes with an outlook for further improvement of collagen-based tissue engineering scaffolds.

Desperately seeking stress: A pilot study of cortisol in archaeological tooth structures

OBJECTIVES

Cortisol is a glucocorticoid hormone produced through activation of the hypothalamic pituitary adrenal axis. It is known as the "stress hormone" for its primary role in the body's stress response and has been the focus of much modern clinical research. Within archaeology, only a few studies have analyzed cortisol in human remains and these have been restricted to hair (Webb et al., 2010; Webb, White, van Uum, & Longstaffe, 2015a; Webb, White, van Uum, & Longstaffe, 2015b). This study examines the utility of dentine and enamel, which survive well archaeologically, as possible reservoirs for detectable levels of cortisol.

MATERIALS AND METHODS

Then, 69 teeth from 65 individuals from five Roman and Post-Roman sites in France were tested via competitive enzyme-linked immunosorbent assay (ELISA) to assess and quantify the cortisol concentrations present within tooth dentine and enamel.

RESULTS

In both tooth dentine and enamel, detectable concentrations of cortisol were identified in multiple teeth. However, concentrations were low and not all teeth yielded results that were measurable through cortisol ELISA. Differences in cortisol values between dentine and enamel could suggest different uptake mechanisms or timing.

DISCUSSION

These results suggest that cortisol is incorporated within tooth structures and merits further investigation in both modern and archaeological contexts. Analysis of the results through liquid chromatographic-mass spectrometry would verify current results and might yield values that could be better integrated with published cortisol studies. Future studies of cortisol in tooth structures would greatly expand the research potential of cortisol in the past and could have implications for studies of human stress across deep time.

Postradiation Matrix Metalloproteinase-20 Expression and Its Impact on Dental Micromorphology and Radiation-Related Caries

Recent evidence suggests that head-and-neck radiotherapy (HNRT) increases active forms of matrix metalloproteinase-20 (MMP-20) in human tooth crowns, degrading the dentin-enamel junction (DEJ) and leading to enamel delamination, which is a pivotal step in the formation of radiation-related caries (RRC). Additional participation of enzymatic degradation of organic matrix components in caries progression was attributed to MMP-20 in dentin. Therefore, the current study tested the hypothesis that MMP-20 is overexpressed in the DEJ, dentin-pulp complex components, and carious dentin of post-HNRT patients, leading to detectable micromorphological changes to the enamel and dentin. Thirty-six teeth were studied, including 19 post-HNRT specimens and 17 nonirradiated controls. Optical light microscopy was used to investigate the micromorphological components of the DEJ, dentin-pulp complex components, and carious dentin. The samples were divided into 2 subgroups: nondemineralized ground sections (n = 20) and demineralized histological sections (n = 16). In addition, immunohistochemical analysis using the immunoperoxidase technique was conducted to semiquantitatively assess MMP-20 expression in the DEJ, dentin-pulp complex components, and carious dentin. No apparent damage to the DEJ microstructure or other dentin-pulp complex components was observed and no statistically significant differences were detected in MMP-20 expression (p > 0.05) between the irradiated and control groups. This study rejected the hypothesis that MMP-20 is overexpressed in the DEJ, dentin-pulp complex components, and carious dentin of post-HNRT patients, leading to detectable micromorphological changes. Hence, direct effects of radiation may not be regarded as an independent factor to explain aggressive clinical patterns of RRC.

Different methods of dentin processing for application in bone tissue engineering: A systematic review

Dentin has become an interesting potential biomaterial for tissue engineering of oral hard tissues. It can be used as a scaffold or as a source of growth factors in bone tissue engineering. Different forms of dentin have been studied for their potential use as bone substitutes. Here, we systematically review different methods of dentin preparation and the efficacy of processed dentin in bone tissue engineering. An electronic search was carried out in PubMed and Scopus databases for articles published from 2000 to 2016. Studies on dentin preparation for application in bone tissue engineering were selected. The initial search yielded a total of 1045 articles, of which 37 were finally selected. Review of studies showed that demineralization was the most commonly used dentin preparation process for use in tissue engineering. Dentin extract, dentin particles (tooth ash), freeze-dried dentin, and denatured dentin are others method of dentin preparation. Based on our literature review, we can conclude that preparation procedure and the size and shape of dentin particles play an important role in its osteoinductive and osteoconductive properties. Standardization of these methods is important to draw a conclusion in this regard. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2616-2627, 2016.

Structural and Morphometric Comparison of Lower Incisors in PACAP-Deficient and Wild-Type Mice

Pituitary adenylate cyclase activating polypeptide (PACAP) is a neuropeptide with widespread distribution. PACAP plays an important role in the development of the nervous system, it has a trophic and protective effect, and it is also implicated in the regulation of various physiological functions. Teeth are originated from the mesenchyme of the neural crest and the ectoderm of the first branchial arch, suggesting similarities with the development of the nervous system. Earlier PACAP-immunoreactive fibers have been found in the odontoblastic and subodontoblastic layers of the dental pulp. Our previous examinations have shown that PACAP deficiency causes alterations in the morphology and structure of the developing molars of 7-day-old mice. In our present study, morphometric and structural comparison was performed on the incisors of 1-year-old wild-type and PACAP-deficient mice. Hard tissue density measurements and morphometric comparison were carried out on the mandibles and the lower incisors with micro-CT. For structural examination, Raman microscopy was applied on frontal thin sections of the mandible. With micro-CT morphometrical measurements, the size of the incisors and the relative volume of the pulp to dentin were significantly smaller in the PACAP-deficient group compared to the wild-type animals. The density of calcium hydroxyapatite in the dentin was reduced in the PACAP-deficient mice. No structural differences could be observed in the enamel with Raman microscopy. Significant differences were found in the dentin of PACAP-deficient mice with Raman microscopy, where increased carbonate/phosphate ratio indicates higher intracrystalline disordering. The evaluation of amide III bands in the dentin revealed higher structural diversity in wild-type mice. Based upon our present and previous results, it is obvious that PACAP plays an important role in tooth development with the regulation of morphogenesis, dentin, and enamel mineralization. Further studies are required to clarify the molecular background of the effects of PACAP on tooth development.

Enzymatic isolation of viable human odontoblasts

AIM

To improve an enzymatic method previously used for isolation of rat odontoblasts to isolate viable mature human odontoblasts.

METHODOLOGY

Collagenase I, collagenase I/hyaluronidase mixture and hyaluronidase were used to extract mature human odontoblasts from the pulp chamber. Detachment of odontoblasts from dentine was determined with field emission scanning electron microscopy (FESEM) and to analyse the significance of differences in tubular diameter, and the t-test was used. MTT-reaction was used to analyse cell viability, and nonparametric Kruskal-Wallis and Mann-Whitney post hoc tests were used to analyse the data. Immunofluorescent staining of dentine sialoprotein (DSP), aquaporin-4 (AQP4) and matrix metalloproteinase-20 (MMP-20) and quantitative PCR (qPCR) of dentine sialophosphoprotein (DSPP) were used to confirm the odontoblastic nature of the cells.

RESULTS

MTT-reaction and FESEM demonstrated collagenase I/hyaluronidase resulted in more effective detachment and higher viability than collagenase I alone. Hyaluronidase alone was not able to detach odontoblasts. Immunofluorescence revealed the typical odontoblastic-morphology with one process, and DSP, AQP4 and MMP-20 were detected. Quantitative PCR of DSPP confirmed that the isolated cells expressed this odontoblast-specific gene.

CONCLUSION

The isolation of viable human odontoblasts was successful. The cells demonstrated morphology typical for odontoblasts and expressed characteristic odontoblast-type genes and proteins. This method will enable new approaches, such as apoptosis analysis, for studies using fully differentiated odontoblasts.

Matrix metalloproteinases and other matrix proteinases in relation to cariology: the era of 'dentin degradomics'

Dentin organic matrix, with type I collagen as the main component, is exposed after demineralization in dentinal caries, erosion or acidic conditioning during adhesive composite restorative treatment. This exposed matrix is prone to slow hydrolytic degradation by host collagenolytic enzymes, matrix metalloproteinases (MMPs) and cysteine cathepsins. Here we review the recent findings demonstrating that inhibition of salivary or dentin endogenous collagenolytic enzymes may provide preventive means against progression of caries or erosion, just as they have been shown to retain the integrity and improve the longevity of resin composite filling bonding to dentin. This paper also presents the case that the organic matrix in caries-affected dentin may not be preserved as intact as previously considered. In partially demineralized dentin, MMPs and cysteine cathepsins with the ability to cleave off the terminal non-helical ends of collagen molecules (telopeptides) may lead to the gradual loss of intramolecular gap areas. This would seriously compromise the matrix ability for intrafibrillar remineralization, which is considered essential in restoring the dentin's mechanical properties. More detailed data of the enzymes responsible and their detailed function in dentin-destructive conditions may not only help to find new and better preventive means, but better preservation of demineralized dentin collagenous matrix may also facilitate true biological remineralization for the better restoration of tooth structural and mechanical integrity and mechanical properties.

Grape seed extracts inhibit dentin matrix degradation by MMP-3

Since Matrix metalloproteinases (MMPs) have been suggested to contribute to dentin caries progression, the hypothesis that MMP inhibition would affect the progression of dentin caries is clinically relevant. Grape seed extracts (GSE) have been previously reported to be natural inhibitors of MMPs.

OBJECTIVE

To evaluate the capacity of a GSE mouthrinse to prevent the degradation of demineralized dentin matrix by MMP-3 (stromelysin-1).

MATERIALS AND METHODS

Standardized blocks of dentin obtained from sound permanent teeth extracted for orthodontic reasons were demineralized with Ethylenediaminetetraacetic acid (EDTA) and pretreated either with (A) GSE (0.2% w/v), (B) amine fluoride (AmF) (20% w/v), (C) a mouthrinse which contains both, (D) placebo, (E) sodium fluoride (0.15 mg.ml(-1)), (F) PBS, (G) Chlorhexidine digluconate (CHX), or (H) zinc chloride (ZnCl2). The dentin blocks were then incubated with activated recombinant MMP-3. The supernatants were analyzed by Western Blot for several dentin matrix proteins known to be MMP-3 substrate. In parallel, scanning electron microscopy (SEM) was performed on resin replica of the dentin blocks.

RESULTS

Western blot analysis of the supernatants revealed that MMP-3 released from the dentin matrix small proteoglycans (decorin and biglycan) and dentin sialoprotein (DSP) in the AmF, sodium fluoride, PBS and placebo pretreated groups, but not in the GSE and mouthrinse pretreated groups. SEM examination of resin replica showed that the mouthrinse and its active components not only had an anti-MMP action but also modified the dentin surface accessibility.

CONCLUSION

This study shows that GSE either alone or combined with AmF as in the evaluated mouthrinse limits dentin matrix degradation. This association may be promising to prevent the progression of caries within dentin. However, the procedure should be adapted to clinically relevant durations.

Optimizing dentin bond durability: control of collagen degradation by matrix metalloproteinases and cysteine cathepsins

OBJECTIVES

Contemporary adhesives lose their bond strength to dentin regardless of the bonding system used. This loss relates to the hydrolysis of collagen matrix of the hybrid layers. The preservation of the collagen matrix integrity is a key issue in the attempts to improve the dentin bonding durability.

METHODS

Dentin contains collagenolytic enzymes, matrix metalloproteinases (MMPs) and cysteine cathepsins, which are responsible for the hydrolytic degradation of collagen matrix in the bonded interface.

RESULTS

The identities, roles and function of collagenolytic enzymes in mineralized dentin has been gathered only within last 15 years, but they have already been demonstrated to have an important role in dental hard tissue pathologies, including the degradation of the hybrid layer. Identifying responsible enzymes facilitates the development of new, more efficient methods to improve the stability of dentin-adhesive bond and durability of bond strength.

SIGNIFICANCE

Understanding the nature and role of proteolytic degradation of dentin-adhesive interfaces has improved immensely and has practically grown to a scientific field of its own within only 10 years, holding excellent promise that stable resin-dentin bonds will be routinely available in a daily clinical setting already in a near future.