Dental erosion: understanding this pervasive condition

Introspection of the Etiopathological Mechanisms Underlying Noncarious Cervical Lesions: Analysis of the Different Theories and Their Impact on the Mineralized Structures of the Tooth

The noncarious cervical lesions (NCCLs) recognize an etiological framework of onset very different from the carious processes with etiology whose bacteria aggregated in a biofilm play a predominant role, leading in this way to the loss of the mineralized structure of the tooth. The pathological picture of the NCCLs, which manifests itself with a clinical picture of dental wear, differs from caries because it mainly recognizes a series of pathological processes, such as erosion, through the action of generally acidic chemical agents and abrasion, which is basically expressed through repeated mechanical trauma characteristic of tooth brushing. However, in the literature, there is no unanimous agreement in identifying only these two mechanisms, but there are some who propose a more marked role of anomalous occlusal loads, which would be unloaded on some teeth which, in addition to both erosive and abrasive mechanisms, would give rise to abfraction. Therefore, the aim of this review was to collect literature etio-pathological information and discuss the mechanisms underlying NCCLs.

Effect of 38% silver diamine fluoride on fracture resistance of leucite reinforced feldspathic ceramic CAD/CAM class I inlay restorations

INTRODUCTION

Silver diamine fluoride (SDF) is a topical agent that has recently gained popularity for its ability to stop and prevent dental caries.

Continuously Quantifying Oral Chemicals Based on Flexible Hybrid Electronics for Clinical Diagnosis and Pathogenetic Study

Simultaneous monitoring of diverse salivary parameters can reveal underlying mechanisms of intraoral biological processes and offer profound insights into the evolution of oral diseases. However, conventional analytical devices with bulky volumes, rigid formats, and discrete sensing mechanisms deviate from the requirements of continuous biophysiological quantification, resulting in huge difficulty in precise clinical diagnosis and pathogenetic study. Here, we present a flexible hybrid electronic system integrated with functional nanomaterials to continuously sense Ca2+, pH, and temperature for wireless real-time oral health monitoring. The miniaturized system with an island-bridge structure that is designed specifically to fit the teeth is only 0.4 g in weight and 31.5×8.5×1.35 mm3 in dimension, allowing effective integration with customized dental braces and comfort attachment on teeth. Characterization results indicate high sensitivities of 30.3 and 60.6 mV/decade for Ca2+ and pH with low potential drifts. The system has been applied in clinical studies to conduct Ca2+ and pH mappings on carious teeth, biophysiological monitoring for up to 12 h, and outcome evaluation of dental restoration, providing quantitative data to assist in the diagnosis and understanding of oral diseases. Notably, caries risk assessment of 10 human subjects using the flexible system validates the important role of saliva buffering capacity in caries pathogenesis. The proposed flexible system may offer an open platform to carry diverse components to support both clinical diagnosis and treatment as well as fundamental research for oral diseases and induced systemic diseases.

Rehabilitation of Worn Dentition with Direct Resin Composite Restorations: A Case Report

The incidence of tooth wear has steadily increased in all Western populations during the past decades. A through-care strategy, extendable for a lifetime, has become crucial to prevent the extensive loss of sound dental structure and to make an eventual retreatment affordable in the long term. An interceptive treatment using resin composite materials and no-preparation approaches meets these requirements. Moreover, continual developments in digital dentistry makes possible to predict the treatment plan for the restorative rehabilitation of the mouth. The availability of digital resources allows clinicians to increase predictability for excellent esthetics and good functional results. This article provides a step-by-step description of a full-mouth additive rehabilitation achieved by employing digital workflows and direct resin composite restorations. A comprehensive functional and esthetic evaluation of the treatment is proposed and discussed.

The in situ potential of synthetic nano-hydroxyapatite for tooth enamel repair

This study was designed to evaluate whether nano-hydroxyapatite toothpastes with or without fluoride would be more advantageous than a fluoride toothpaste in the repair of eroded enamel in situ. Twenty-one subjects participated in this single-blind, randomized, cross-over design study with three 7-day treatment phases. In each phase, the subjects wearing a palatal appliance containing five sterilized enamel specimens used either one of the two test regimens (1% nano-hydroxyapatite toothpaste and 2.25% nano-hydroxyapatite/1450 parts per million (ppm) fluoride toothpaste) or one control (1400 ppm fluoride toothpaste). Enamel specimens were extraorally demineralized (4 × 5 min/day) and were intraorally treated with the toothpastes (2 × 2 min/day). The nano-hydroxyapatite toothpaste groups exhibited significantly higher surface microhardness than did the standard fluoride toothpaste group (p < 0.05). Enamel surface hardness was increased only by nano-hydroxyapatite toothpastes after in situ treatment compared with the baseline (p < 0.05). Morphological analysis demonstrated an apatite-type crystal deposition on the eroded enamel surface produced by nano-hydroxyapatite toothpastes, while fluoride toothpaste failed to show any significant surface deposition. Chemical analysis showed a higher content of calcium and phosphorus in the enamel surface treated with nano-hydroxyapatite toothpastes compared with that in the control one (p < 0.05). It is concluded that home use of nano-hydroxyapatite containing toothpastes may have a protective effect against erosion at the enamel surface.

Effects of fluoride and epigallocatechin gallate on soft-drink-induced dental erosion of enamel and root dentin

BACKGROUND/PURPOSE

Fluoride and epigallocatechin gallate (EGCG) have been proven to prevent dental caries. The purpose of this study was to evaluate the effects of fluoride and EGCG on soft-drink-induced dental erosion in vitro.

METHODS

Forty enamel and dentin specimens were prepared from extracted human teeth. The specimens were divided into 4 groups and treated separately with distilled water (as control), 0.5 M sodium fluoride (NF), 400 μM EGCG (EG), and a solution containing 0.5 M NaF and 400 μM EGCG (FG). Cyclic erosive treatment was performed according to the experimental procedures. The specimens were analyzed using laser scanning confocal microscopy, scanning electron microscopy, and a microhardness tester. The data were analyzed using ANOVA and Bonferroni's post hoc test. The significance level was set at 5%.

RESULTS

The amount of substance loss was lower in the NF and EG groups than in the control group (p < 0.05). The erosion-caused substance loss was more pronounced in the dentin than in the enamel specimens. Surface microhardness loss was lower in the NF and EG groups than in the control group (p < 0.05). The diameter of the dentinal tubule was wider in the control group than in the NF and EG groups (p < 0.05). No combined effects were observed in the FG group.

CONCLUSION

Both fluoride and EGCG are effective in preventing soft-drink-induced erosion compared with the control group. Fluoride and EGCG may interfere with each other. The mechanisms of the anti-erosive effect need to be explored in the future.

Susceptibility of partially desalivated rats to erosive tooth wear by calcium-supplemented beverages

OBJECTIVES

To investigate the susceptibility of partially desalivated rats to erosive tooth wear (ETW); the anti-erosive effect of a calcium-supplemented beverage; and the quantification of ETW by microcomputed tomography (micro-CT).

METHODS

The study population consisted of thirty-eight rats, divided into partially desalivated (n = 19) and normal salivary flow (n = 19). They were randomly allocated into three subgroups (n = 6-7): A-diet soda, B-diet soda + calcium, C-water (control). Solutions were provided ad libitum for 28 days, and the rats were euthanized afterwards. Each left hemi-mandible was scanned using micro-CT for enamel volume (three molars) calculation. Visual analysis of photographs of the lingual surface of first molars was performed independently by three blinded examiners. Data were statistically analysed (α = .05).

RESULTS

Micro-CT revealed no significant differences between partially desalivated or normal groups. Rats consuming A had more enamel loss than those consuming B or C, which did not differ from each other. For visual analysis, desalivation did not affect ETW. Rats consuming C showed the lowest ETW, followed by B and then A, for both partially desalivated and normal rats. Spearman correlation between the two ETW quantification methods was -.65.

CONCLUSIONS

Partial desalivation did not increase ETW. Ca-containing beverage prevented ETW. Micro-CT quantified ETW, although it was not as sensitive as visual analysis.

Surface roughness of composite resins subjected to hydrochloric acid

The purpose of this study was to determine the influence of hydrochloric acid on surface roughness of composite resins subjected to brushing. Sixty samples measuring 2 mm thick x 6 mm diameter were prepared and used as experimental units. The study presented a 3x2 factorial design, in which the factors were composite resin (n=20), at 3 levels: microhybrid composite (Z100), nanofilled composite (FiltekTM Supreme), nanohybrid composite (Ice), and acid challenge (n=10) at 2 levels: absence and presence. Acid challenge was performed by immersion of specimens in hydrochloric acid (pH 1.2) for 1 min, 4 times per day for 7 days. The specimens not subjected to acid challenge were stored in 15 mL of artificial saliva at 37 oC. Afterwards, all specimens were submitted to abrasive challenge by a brushing cycle performed with a 200 g weight at a speed of 356 rpm, totaling 17.8 cycles. Surface roughness measurements (Ra) were performed and analyzed by ANOVA and Tukey test (p≤0.05). Surface roughness values were higher in the presence (1.07±0.24) as compared with the absence of hydrochloric acid (0.72±0.04). Surface roughness values were higher for microhybrid (1.01±0.27) compared with nanofilled (0.68 ±0.09) and nanohybrid (0.48±0.15) composites when the specimens were not subjects to acid challenge. In the presence of hydrochloric acid, microhybrid (1.26±0.28) and nanofilled (1.18±0,30) composites presents higher surface roughness values compared with nanohybrid (0.77±0.15). The hydrochloric acid affected the surface roughness of composite resin subjected to brushing.

Restorative Rehabilitation of a Patient with Dental Erosion

Dental erosion is the chemical dissolution of the tooth structure. Factors like eating disorders and gastrointestinal diseases are recognized as intrinsic factors for dental erosion. Advanced stages of dental erosion extensively damage the tooth morphology, consequently affecting both esthetics and functions. Reports indicate the growing prevalence of erosion, and hence knowledge of restorative rehabilitation of tooth erosion is an integral part of the contemporary dental practice. This clinical report describes an adult patient with gastroesophageal reflux induced dental erosion involving the palatal surface of the maxillary anterior teeth. The extensive involvement of the palatal surfaces compromised the esthetics, incisal guidance, and functional occlusal efficiency. Indirect all-ceramic restorations were utilized to restore the esthetics and occlusal reconstruction. In conclusion, patients affected by severe dental erosion require prosthetic rehabilitation besides the management of the associated medical condition.

Demineralization-remineralization dynamics in teeth and bone

Biomineralization is a dynamic, complex, lifelong process by which living organisms control precipitations of inorganic nanocrystals within organic matrices to form unique hybrid biological tissues, for example, enamel, dentin, cementum, and bone. Understanding the process of mineral deposition is important for the development of treatments for mineralization-related diseases and also for the innovation and development of scaffolds. This review provides a thorough overview of the up-to-date information on the theories describing the possible mechanisms and the factors implicated as agonists and antagonists of mineralization. Then, the role of calcium and phosphate ions in the maintenance of teeth and bone health is described. Throughout the life, teeth and bone are at risk of demineralization, with particular emphasis on teeth, due to their anatomical arrangement and location. Teeth are exposed to food, drink, and the microbiota of the mouth; therefore, they have developed a high resistance to localized demineralization that is unmatched by bone. The mechanisms by which demineralization-remineralization process occurs in both teeth and bone and the new therapies/technologies that reverse demineralization or boost remineralization are also scrupulously discussed. Technologies discussed include composites with nano- and micron-sized inorganic minerals that can mimic mechanical properties of the tooth and bone in addition to promoting more natural repair of surrounding tissues. Turning these new technologies to products and practices would improve health care worldwide.

Minimum intervention in restorative dentistry with V-shaped facial and palatal ceramic veneers: A clinical report

The esthetic and functional rehabilitation of worn anterior teeth should follow the principles of minimally invasive dentistry. When dental wear occurs at both the facial and palatal surfaces, the sandwich approach of reconstructing eroded anterior teeth with palatal followed by facial veneers is a straightforward treatment that preserves sound dental structure.

Extraesophageal presentations of GERD: where is the science?

This article reviews the evaluation and management of patients with suspected extraesophageal manifestations of gastroesophageal reflux disease, such as asthma, chronic cough, and laryngitis, which are commonly encountered in gastroenterology practices. Otolaryngologists and gastroenterologists commonly disagree upon the underlying cause for complaints in patients with one of the suspected extraesophageal reflux syndromes. The accuracy of diagnostic tests (laryngoscopy, endoscopy, and pH- or pH-impedance monitoring) for patients with suspected extraesophageal manifestations of gastroesophageal reflux disease is suboptimal. An empiric trial of proton pump inhibitors in patients without alarm features can help some patients, but the response to therapy is variable.

Eating disorder risk behavior and dental implications among adolescents

OBJECTIVE

To compare the occurrence of tooth erosion (TE) and dental caries (DC) in adolescents with and without risk behavior for eating disorders (EDs).

METHOD

A controlled cross-sectional study involving 1,203 randomly selected female students aged 15-18 years was conducted in Brazil. Risk behavior for EDs was evaluated through the Bulimic Investigatory Test of Edinburgh and dental examinations were performed.

RESULTS

The prevalence of risk behavior for EDs was 6%. Twenty adolescents (1.7%) were identified with severe risk behavior for EDs and matched to 80 adolescents without such risk. Among the severe risk group, 45% of adolescents were affected by TE and 80% by DC compared with 8.8 and 51.3%, respectively, in the matched group. Adolescents with severe risk had higher chances for TE (OR = 10.04; 95% CI = 2.5-39.4).

DISCUSSION

In this study, a severe risk behavior for EDs was significantly associated with TE, but not with DC.

Opinions on Dental Erosive Lesions, Knowledge of Diagnosis, and Treatment Strategies among Norwegian Dentists: A Questionnaire Survey

This study aimed to investigate dentists' general experience, knowledge about diagnosis, and treatment of dental erosive wear in young adults. A questionnaire was sent to 1262 Norwegian public dental health-employed dentists. The response rate was 60%. Results indicated that most dentists recorded erosive wear, half of them used a specific scoring system, and half registered lesions at the tooth surface level. Lesions were reported most often on palatal surfaces of upper anterior teeth (79% of dentists), on occlusal surfaces of lower 1st molars (74%), and on upper 1st molars (32%). Half the dentists used clinical photographs for documentation and 60% made study models. While 40% reported more erosive lesions in males, 36% reported no gender differences. High intake of carbonated beverages and acidic juices were reported as the most common cause by 97% and 72% of the dentists, respectively. Only 21% of dentists recorded the patient's dietary history, and 73% never measured saliva secretion. The majority (78%) of the dentists treated patients with erosive wear themselves. In general, the survey suggests that the dentists are relatively up to date regarding the clinical recording, diagnosis, and treatment of dental erosive wear. However, dietary and salivary analyses were not given priority, and early, preventive treatment was lacking.