Examination of denture-cleaning methods based on the quantity of microorganisms adhering to a denture

Prevalence of respiratory pathogens colonizing on removable dental prostheses in healthy older adults: A systematic review and meta-analysis

PURPOSE

This systematic review and meta-analysis aimed to investigate the prevalence of opportunistic respiratory pathogens colonizing removable dental prostheses in older adults without respiratory diseases.

METHODS

This review was registered with PROSPERO and conducted in accordance with the principles formed by the working group of the Joanna Briggs Institute (JBI) to evaluate systematic reviews of prevalence data. Literature searches were conducted across five electronic databases. Quality assessments were determined according to a revised JBI critical appraisal checklist across nine criteria. Comparison between fixed- and random-effects meta-analyses were performed for sensitivity analysis. Prediction intervals were also presented when three or more studies were included in the meta-analysis.

RESULTS

Across the databases, 1091 articles were identified, and 591 articles remained after the removal of duplicates. Twenty "potentially effective" studies were identified. Ultimately eight studies informed this review and meta-analyses were performed for 13 known respiratory pathogens. The meta-analyses identified the top three common respiratory pathogens residing on the removable prostheses were, in descending order: Staphylococcus aureus: 31.81% (95% CI: 13.34%-48.24%); Staphylococcus epidermidis: 14.07% (95% CI: 7.88%-21.48%); Klebsiella pneumoniae: 10.50% (95% CI: 2.55%-22.30%). The heterogeneity scores for nine respiratory pathogen analyses were classified as "unimportant inconsistency", I2 = 0% (p > 0.1). For sensitivity analysis, there was no difference between the random- and fixed-effects models.

CONCLUSION

The existing evidence demonstrated a high burden of certain opportunistic respiratory pathogens, which may be considered a major potential cause of respiratory infections in older adults wearing removable prostheses.

A comparison of the prevalence of respiratory pathogens and opportunistic respiratory pathogenic profile of 'clean' and 'unclean' removable dental prostheses

OBJECTIVES

To determine and compare the opportunistic respiratory pathogenic index (ORPI) and prevalence of respiratory pathogens between clean and unclean removable prostheses.

METHODS

A cross-sectional study was conducted among 97 removable prosthesis wearers at a teaching dental hospital. Participants' prosthesis hygiene was grouped into clean and unclean. After prosthesis plaque samples were sequenced using the Type IIB Restriction-site Associated DNA Sequencing for Microbiome method, the prevalence was assessed for the presence of respiratory pathogens on each sample. The ORPIs for clean and unclean prostheses were quantified based on the sum of the relative abundance of respiratory pathogenic bacteria in a microbiome using a reference database that contains opportunistic respiratory pathogens and disease-associated information.

RESULTS

A total of 30 opportunistic respiratory pathogens were identified on the removable prostheses. Eighty-one (83.5 %) removable prostheses harboured respiratory pathogenic bacteria. Stenotrophomonas maltophilia (34.0 %), Pseudomonas aeruginosa (27.8 %), and Streptococcus agalactiae (27.8 %) were the top three prevalent respiratory pathogens detected in plaque samples. There was a significantly higher prevalence of respiratory pathogens residing on unclean than clean prostheses (P = 0.046). However, the ORPIs in both groups showed no statistically significant difference (P = 0.516).

CONCLUSIONS

The ORPIs for both clean and unclean prostheses demonstrated a similar abundance of respiratory pathogens. However, the high prevalence of respiratory pathogens residing on unclean prostheses should not be underestimated. Therefore, maintaining good prosthesis hygiene is still important for overall oral and systemic health, even though the direct link between prosthesis cleanliness and reduced abundance of respiratory pathogens has not been established.

CLINICAL SIGNIFICANCE

The association between the prevalence of respiratory pathogens and unclean removable prostheses has been demonstrated and might increase the theoretical risk of respiratory disease development.

Strategies for Preventing and Treating Oral Mucosal Infections Associated with Removable Dentures: A Scoping Review

Oral infections occur due to contact between biofilm rich in Candida albicans formed on the inner surface of complete dentures and the mucosa. This study investigated historical advances in the prevention and treatment of oral mucosal infection and identified gaps in the literature. Bibliographic research was conducted, looking at PubMed, Embase, Web of Science, and Scopus, where 935 articles were found. After removing duplicates and excluding articles by reading the title and abstract, 131 articles were selected for full reading and 104 articles were included. Another 38 articles were added from the gray literature. This review followed the PRISMA-ScR guidelines. The historical period described ranges from 1969 to 2023, in which, during the 21st century, in vitro and in vivo studies became more common and, from 2010 to 2023, the number of randomized controlled trials increased. Among the various approaches tested are the incorporation of antimicrobial products into prosthetic materials, the improvement of oral and denture hygiene protocols, the development of synthetic and natural products for the chemical control of microorganisms, and intervention with local or systemic antimicrobial agents. Studies report good results with brushing combined with sodium hypochlorite, and new disinfectant solutions and products incorporated into prosthetic materials are promising.

Characterization of pathogenic microbiome on removable prostheses with different levels of cleanliness using 2bRAD-M metagenomic sequencing

Background

The microbiomes on the surface of unclean removable prostheses are complex and yet largely underexplored using metagenomic sequencing technology.

Objectives

To characterize the microbiome of removable prostheses with different levels of cleanliness using Type IIB Restriction-site Associated DNA for Microbiome (2bRAD-M) sequencing and compare the Microbial Index of Pathogenic Bacteria (MIP) between clean and unclean prostheses.

Materials and Methods

Ninety-seven removable prostheses were classified into 'clean' and 'unclean' groups. All prosthesis plaque samples underwent 2bRAD metagenomic sequencing to characterize the species-resolved microbial composition. MIPs for clean and unclean prostheses were calculated based on the sum of the relative abundance of pathogenic bacteria in a microbiome using a reference database that contains opportunistic pathogenic bacteria and disease-associated information.

Results

Beta diversity analyses based on Jaccard qualitative and Bray-Curtis quantitative distance matrices identified significant differences between the two groups (p < 0.05). There was a significant enrichment of many pathogenic bacteria in the unclean prosthesis group. The MIP for unclean prostheses (0.47 ± 0.25) was significantly higher than for clean prostheses (0.37 ± 0.29), p = 0.029.

Conclusions

The microbial community of plaque samples from 'unclean' prostheses demonstrated compositional differences compared with 'clean' prostheses. In addition, the pathogenic microbiome in the 'unclean' versus 'clean' group differed.

Agreement in quantification of removable prosthesis plaque area coverage using a semi-automated planimetric assessment method

OBJECTIVES

To determine the agreement of removable dental prosthesis cleanliness as assessed by a semi-automated planimetric method between images captured by a digital single-lens reflex camera (DSLR) and smartphone.

METHODS

A total of 97 participants with removable prostheses were recruited for the quantification of the prosthesis plaque area coverage. The colour images of stained prosthesis plaque were obtained using both a DSLR camera and a smartphone. The prosthesis plaque area coverage was analysed in two ways: (i) prosthesis cleanliness index (PCI) and (ii) percentage plaque area coverage (PPC). The PPC (continuous data) was converted to the PCI (categorical data) to provide prevalence ordinal scales and the agreements in PCI ratings were determined using weighted Kappa statistics. Agreement of PPC scores was determined through assessing directional, standardised directional, and absolute differences and correlation analyses.

RESULTS

Weighted Kappa values of agreement between PCI categories were excellent (> 0.80) for all comparisons. The mean PPC was 24.79 % as determined by DSLR and 25.37 % as determined by smartphone. There was no statistically significant difference in the means of PPC between the DSLR and smartphone (P = 0.149). The standardised directional difference was 0.15 ('small'). The mean absolute difference was 2.77. The interclass correlation coefficient was 0.98 ('excellent').

CONCLUSIONS

This method showed almost perfect agreements and allowed for threshold-based plaque segmentation on the removable prostheses. There was substantial agreement between DSLR and smartphone assessment of prosthesis plaque area coverage as determined by a semi-automated planimetric assessment.

CLINICAL SIGNIFICANCE

This semi-automated planimetric assessment method has implications for monitoring removable prosthesis hygiene initiatives by offering a valid, reliable, and quantitative method of assessment with potential use in managed care and community settings.

The stain resistant effect of an ultraviolet curable coating material on denture base resin

This study aimed to evaluate the effects of an ultraviolet (UV) curable coating material on denture base resin. The results of the three-point bending test showed no significant difference between treated and untreated specimens, suggesting that the UV curable coating material did not compromise the physical strength of denture base resin. The surface free energy measurement and the surface analysis with atomic force microscopy revealed superhydrophilicity and a regularly arranged structure on the coating surface, improving wettability. Moreover, untreated specimens were significantly discolored in the staining test. However, specimens treated with the UV curable coating material showed no significant difference in color with slight staining, suggesting excellent antifouling ability. Therefore, the UV curable coating material used in this study could contribute to simplifying hygiene without altering the physical properties of denture base resins.

Effects of Denture Cleaning Regimens on the Quantity of Candida on Dentures: A Cross-Sectional Survey on Nursing Home Residents

Oral care involving a denture cleaning regimen is important for reducing the incidence of systemic diseases. However, limited information is currently available on denture cleaning frequencies and regimens. Therefore, the present study investigated the relationship between the number of Candida spp. present on the complete dentures of nursing home residents and cleaning regimens. Residents were surveyed to assess their denture cleaning methods. Plaque was collected by applying a sterile swab to the mucosal surface of each examined complete denture worn by 77 residents, and the Candida spp. collected were cultured, identified, and quantified. The relationship between denture cleaning regimens and the quantity of Candida spp. was investigated. Correlation and multivariable analyses revealed that the strongest factor influencing the number of Candida spp. on dentures was the frequency of use of denture cleansers. The number of Candida spp. was the lowest on dentures cleaned daily with a denture cleanser. The present results demonstrated that the daily use of a denture cleanser effectively controlled the adherence of Candida spp. to dentures. Oral and other healthcare providers need to provide instructions on and assist nursing home residents with the daily care of dentures, using denture cleansers, including the environment where cleaning is performed.

Properties and characteristics of foam denture cleaners as denture adhesive removers

The need for denture adhesives is increasing worldwide, but few denture-care products target denture adhesive users. Foam denture cleaners have been recently marketed to assist brush denture cleaning, but there is a lack of objective evaluation. In this study, we compared the detergency of denture adhesives using six commercial foam-denture cleaners. For removing the adhesives, most of the tested cleaners were effective in immersion experiments, and three cleaners were more effective in the denture cleaning experiment compared to control water. However, only one could effectively remove the slime that is derived from the adhesive and detergency of artificial dirt. The surface roughnesses of the denture base and the relining material revealed that prolonged immersion in some cleaners could be affected. The results suggest that different commercial foam denture cleaners have different detergency levels, and that some cleaners may affect the properties of denture materials upon long-term use.

Bacterial Disinfection of Polymethyl Methacrylate (PMMA) Resin Polymer Using Low Level Microwave Irradiation and Denture Cleaning Agent

The aim was to evaluate the disinfection of E. coli, S. aureus and S. mutans cultured on Polymethyl Methacrylate (PMMA) resin polymer using microwave disinfection and sodium perborate (DC). Biofilms of E. coli, S. aureus and S. mutans were cultured on the PMMA denture base for 24, 36, 48 and 96 h. Specimens were subjected to three disinfection protocols, including microwave disinfection in distilled water (MW-DW), sodium perborate (denture cleaning tablet) with distilled water (DC-DW) and a combination of MW-DC-DW for 1 to 5 min. Colony-forming units among the study groups were analyzed using Kruskal–Wallis and Mann–Whitney tests. For E. coli and S. aureus cultured on PMMA, the MW-DC-DW group displayed complete disinfection at 2 min of exposure. However, for both bacteria, the MW-DW disinfection group showed zero CFU at 3 min. DC disinfection for E. coli and S. aureus displayed zero CFU at 5 min of exposure (p ≤ 0.05). For S. mutans, MW-DC-DW and MW-DW displayed zero CFU count at 1 min and 2 min, respectively. In DC-treated samples, CFU were significantly zero at 4 min when compared with the control at each growth time. A combination of MW irradiation with DC (sodium perborate) showed higher disinfection percentage of bacterial species on PMMA polymer denture bases compared to MW and DC alone. PMMA disinfection using DC displayed a lower antimicrobial disinfection percentage than the combined use of MW and DC as well as MW alone at 1 min or 2 min disinfection for E. coli, S. aureus and S. mutans.

Infrequent Denture Cleaning Increased the Risk of Pneumonia among Community-dwelling Older Adults: A Population-based Cross-sectional Study

Pneumonia is a leading cause of death among older adults. The effectiveness of oral care in preventing pneumonia in nursing homes and hospitals has been reported. However, in community-dwelling older adults, the role of denture cleaning in preventing pneumonia remains unknown. We aimed to investigate the association between infrequent denture cleaning and the risk of pneumonia in community-dwelling older adults. This cross-sectional study was based on the self-reported questionnaire targeting towards community-dwelling older adults aged ≥65 years. Responses of 71,227 removable full/partial denture users were included. The incidence of pneumonia within the last one-year and the frequency of denture cleaning (daily/non-daily) were treated as dependent and independent variables, respectively. The odds ratio (OR) and 95% confidence interval (CI) were calculated by the inverse probability weighting (IPW) method based on the logistic regression model. The mean age of the participants was 75.2 ± 6.5 years; 48.3% were male. Overall, 4.6% of the participants did not clean their dentures daily; 2.3% and 3.0% who did and did not clean their dentures daily, respectively, experienced pneumonia. After IPW, infrequent denture cleaning was significantly associated with pneumonia incidence (OR = 1.30, 95% CI = 1.01–1.68)). This study suggests that denture cleaning could prevent pneumonia among community-dwelling older adults.

Effect of water temperature during ultrasonic denture cleaning

Denture plaque is a biofilm composed of various microorganisms aggregated with saliva. Various denture cleansers and cleaning apparatuses have been developed and studied. However, the optimum water temperature for denture cleaning is unknown. Therefore, the present study investigated the effects of water temperature during ultrasonic denture cleaning. In vitro, resin disks with artificial Candida albicans biofilm were pressed onto Candida GE media after ultrasonic cleaning with water at different temperatures for 5 min. The media were subsequently cultured at 37°C for 24 h. The colonies formed were observed and colony areas were quantified using ImageJ software (US National Institutes of Health, Bethesda, MD, USA). In situ, the bacterial count and degree of cleanliness on the tissue surface of maxillary dentures were measured before and after ultrasonic cleaning with water at different temperatures for 5 min. Changes in bacterial counts and cleanliness were calculated for each temperature. The ratio of the area occupied by bacterial colonies in vitro and reduction rates in situ after cleaning with warm water were markedly less than those observed after cleaning with cold water. Therefore, ultrasonic denture cleaning with warm water is more effective.

Impact of frequency of denture cleaning on microbial and clinical parameters - a bench to chairside approach

Objective: Robust scientific and clinical evidence of how to appropriately manage denture plaque is lacking. This two-part study (i) developed an in vitro model of denture plaque removal, and (ii) assessed effectiveness of these approaches in a randomised clinical trial.

Method: (i) a complex denture plaque model was developed using the dominant microbial genera from a recent microbiome analyses. Biofilms formed on polymethylmethacrylate were brushed daily with a wet toothbrush, then either treated daily for 5 days or only on Days 1 and 5 with Polident® denture cleanser tablets (3 min soaking). Quantitative and qualitative microbiological assessments were performed. (ii), an examiner-blind, randomised, crossover study of complete maxillary denture wearers was performed (n = 19). Either once-daily for 7 days or on Day 7 only, participants soaked dentures for 15 min using Corega® denture cleansing tables, then brushed. Denture plaque microbiological assessment used sterilized filter paper discs.

Results: The in vitro model showed daily cleaning with denture cleanser plus brushing significantly reduced microbial numbers compared to intermittent denture cleaning with daily brushing (p < 0.001). The clinical component of the study showed a statistically significant reduction in denture plaque microbial numbers in favour of daily versus weekly treatment (aerobic bacteria p = 0.0144). Both in vitro and in vivo studies showed that denture plaque biofilm composition were affected by different treatment arms.

Conclusions: This study demonstrated that daily denture cleansing regimens are superior to intermittent denture cleansing, and that cleansing regimens can induce denture plaque compositional changes. Clinicaltrials.gov registration: NCT02780661.

Antifungal, optical, and mechanical properties of polymethylmethacrylate material incorporated with silanized zinc oxide nanoparticles

Background

Fungal infected denture, which is typically composed of polymethylmethacrylate (PMMA), is a common problem for a denture wearer, especially an elderly patient with limited manual dexterity. Therefore, increasing the antifungal effect of denture by incorporating surface modification nanoparticles into the PMMA, while retaining its mechanical properties, is of interest.

Aim of the study

This study aimed to evaluate antifungal, optical, and mechanical properties of heat-cured PMMA incorporated with different amounts of zinc oxide nanoparticles (ZnOnps) with or without methacryloxypropyltrimethoxysilane modification.

Materials and methods

Specimens made from heat-cured PMMA containing 1.25, 2.5, and 5% (w/w) nonsilanized (Nosi) or silanized (Si) ZnOnps were evaluated. Specimens without filler served as control. The fungal assay was performed placing a Candida albicans suspension on the PMMA surface for 2 h, then Sabouraud Dextrose Broth was added, and growth after 24 h was determined by counting colony forming units on agar plates. A spectrophotometer was used to measure the color in L* (brightness), a* (red-green), b* (yellow-blue) and opacity of the experimental groups. Flexural strength and flexural modulus were determined using a three-point bending test on universal testing machine after 37°C water storage for 48 h and 1 month.

Results

The antifungal, optical, and mechanical properties of the PMMA incorporated with ZnOnps changed depending on the amount. With the same amount of ZnOnps, the silanized groups demonstrated a greater reduction in C. albicans compared with the Nosi groups. The color difference (ΔE) and opacity of the Nosi groups were greater compared with the Si groups. The flexural strength of the Si groups, except for the 1.25% group, was significantly greater compared with the Nosi groups.

Conclusion

PMMA incorporated with Si ZnOnps, particularly with 2.5% Si ZnOnps, had a greater antifungal effect, less color differences, and opacity compared with Nosi ZnOnps, while retaining its mechanical properties.

Impact of Types of Moisturizer and Humidity on the Residual Weight and Viscosity of Liquid and Gel Oral Moisturizers

PURPOSE

Oral moisturizers need to be selected based on their material properties. The purpose of this study was to investigate the effects of moisturizer type and humidity on the residual weight and viscosity of oral moisturizers.

MATERIALS AND METHODS

The weight and viscosity of 17 oral moisturizers (7 liquid and 10 gel) at baseline and after 8 hours were measured using an incubator maintained at 37°C at either 85% or 40% relative humidity (RH). The rate of change in weight (RCW) and the rate of change in viscosity (RCV) were calculated. Data were analyzed with two-way analysis of variance (ANOVA) and Scheffe's test to evaluate the effect of the type of moisturizer (liquid or gel) and humidity (85% or 40% RH) on RCW and RCV. Pearson's correlation coefficient was used to evaluate the relationship between RCW and RCV.

RESULTS

Two-way ANOVA results indicated that the type of moisturizer and RH had a significant effect on RCW and RCV (p < 0.05); however, the interaction between them was not significant. The results of multiple comparisons showed that gel moisturizers had a significantly lower RCW and higher RCV than liquid moisturizers (p < 0.05). The RCW and RCV at 40% RH were significantly higher than those at 85% RH (p < 0.05). There was no correlation between RCW and RCV in the liquid moisturizer group, but a significant negative correlation was found in the gel moisturizer group (pp = 0.01).

CONCLUSION

Because viscosity of gel moisturizers increases as weight decreases, selecting gel moisturizers with a minimal change in weight and viscosity would be preferable in the case of a long-time application and severe dry mouth.

ATP Bioluminometers Analysis on the Surfaces of Removable Orthodontic Aligners after the Use of Different Cleaning Methods

Purpose. The aim was to quantify the bacteria concentration on the surface of orthodontic clear aligners using three different cleaning methods. Furthermore the objective was to validate the efficacy of the bioluminometer in assessing the bacteria concentration. Materials and Methods. Twenty subjects (six males and fourteen females) undergoing orthodontic therapy with clear aligners (Invisalign® Align Technology, Santa Clara, California) were enrolled in this study. The observation time was of six weeks. The patients were instructed to use different cleaning methods (water, brushing with toothpaste, and brushing with toothpaste and use of sodium carbonate and sulphate tablet). At the end of each phase a microbiological analysis was performed using the bioluminometer. Results. The highest bacteria concentration was found on aligners cleaned using only water (583 relative light units); a value of 189 relative light units was found on aligners cleaned with brushing and toothpaste. The lowest bacteria concentration was recorded on aligners cleaned with brushing and toothpaste and the use of sodium carbonate and sulfate tablet. Conclusions. The mechanical removal of the bacterial biofilm proved to be effective with brushing and toothpaste. The best results in terms of bacteria concentration were achieved adding the use of sodium carbonate and sulfate tablet.

Clinical trial of an experimental cleaning solution: antibiofilm effect and integrity of a silicone-based denture liner

AIM

This study evaluated the antibiofilm effect of an experimental solution of 2% Ricinus communis (R. communis) on a silicone-based denture liner by means of a randomized clinical trial, as well as the integrity of such liner following a cleansing regimen with such solution.

MATERIALS AND METHODS

About 30 complete denture wearers had their lower dentures relined with a silicone-based denture liner and randomly allocated to cleanse their dentures by means of: (A) a specific toothbrush for complete dentures and dentifrice; (B) soaking in an experimental 2% R. communis solution; and (C) association of A and B. Considered outcomes were biofilm coverage area (%), microbial counts by means of the deoxy-ribonucleic acid (DNA) checkerboard hybridization technique and physical integrity of the soft liner, assessed during a time interval of 60 days. Mean group values were compared by analysis of variance (ANOVA) and Tukey tests or generalized linear method (α = 0.05).

RESULTS

The mechanical method presented the lowest biofilm percentage (1.45 ± 1.03) if compared to the chemical method (2.96 ± 1.98) and the associated one (2.71 ± 1.76). After 60 days (3.37 ± 2.04), biofilm accumulation was higher than at 15 days (1.28 ± 0.77) and 30 days (2.46 ± 1.54). The denture liner was less deteriorated and kept its physical integrity when the mechanical method was applied. The chemical method presented higher effectiveness against microorganisms, including some Candida species.

CONCLUSION

The 2% R. communis solution presented stronger antimicrobial capacity than brushing on a silicone-based denture liner after immersion. However, it was not superior to the mechanical method in preserving the physical integrity of the material and in biofilm removal.

CLINICAL SIGNIFICANCE

Soft denture liners hygiene is a very important issue and not conclusive in the literature. The experimental solution of 2% R. communis evaluated presented promising antimicrobial potential and should be more explored to be recommended as cleanser.

In vitro antifungal evaluation of seven different disinfectants on acrylic resins

Objective. The aim of this study was to evaluate alternative methods for the disinfection of denture-based materials. Material and Methods. Two different denture-based materials were included in the study. Before microbial test, the surface roughness of the acrylic resins was evaluated. Then, the specimens were divided into 8 experimental groups (n = 10), according to microorganism considered and disinfection methods used. The specimens were contaminated in vitro by standardized suspensions of Candida albicans ATCC#90028 and Candida albicans oral isolate. The following test agents were tested: sodium hypochlorite (NaOCl 1%), microwave (MW) energy, ultraviolet (UV) light, mouthwash containing propolis (MCP), Corega Tabs, 50% and 100% white vinegar. After the disinfection procedure, the number of remaining microbial cells was evaluated in CFU/mL. Kruskal-Wallis, ANOVA, and Dunn's test were used for multiple comparisons. Mann Whitney U test was used to compare the surface roughness. Results. Statistically significant difference (P < 0.05) was found between autopolymerised and heat-cured acrylic resins. The autopolymerised acrylic resin surfaces were rougher than surfaces of heat-cured acrylic resin. The most effective disinfection method was 100% white vinegar for tested microorganisms and both acrylic resins. Conclusion. This study showed that white vinegar 100% was the most effective method for tested microorganisms. This agent is cost-effective and easy to access and thus may be appropriate for household use.

Efficacy of denture cleansers in reducing microbial counts from removable partial dentures: a short-term clinical evaluation

This clinical study investigated if daily immersion in denture cleansers reduces microbial counts on removable partial denture's (RPD) biofilm. Twenty-five RPD wearer volunteers were selected and instructed to complement the hygiene of their dentures by immersing them in an enzymatic peroxide-based denture cleanser (Polident® 3 minute) once a day for 3 min for a period of 15 days. The biofilm was collected from RPD surfaces with a swab immediately before (baseline) and after the experimental period. The samples were placed in sterile saline solution, sonicated at 7 W and then plated on specific culture media to quantify total microorganisms, total streptococci and Candida spp. counts. Data from both collections were compared by paired t-test (α=0.05). It was observed a significant reduction on total microorganisms' counts in RPD biofilm after denture cleanser use (p=0.007). This reduction was also observed for total streptococci (p=0.0428), but no difference was observed on Candida spp. counts. It was concluded that daily use of denture cleanser improved denture hygiene by reducing total microorganisms and total streptococci from RPD surface but had no effect on Candida spp. population.

Dry mouth and denture plaque microflora in complete denture and palatal obturator prosthesis wearers

OBJECTIVE AND BACKGROUND

The purpose of this study was to investigate the association of dry mouth with denture plaque microflora in patients with palatal obturator prostheses from the viewpoint of infection control.

METHODS

Thirty palatal obturator prosthesis wearers were compared with 30 healthy maxillary complete denture wearers. Dry mouth was examined using a moisture-checking device and was diagnosed by the measured moisture levels. Denture plaque was collected by rubbing the mucosal surface of the denture with a swab; collected microorganisms were cultured and identified using culture-dependent methods. The number of colonising microorganisms and prevalence of microorganisms were examined according to the type of prostheses and presence of dry mouth using nonparametric tests and frequency analysis (α = 0.05).

RESULTS

The prevalence of Candida spp. and Staphylococcus spp. in palatal obturator prostheses was significantly higher than that in complete dentures. In palatal obturator prostheses, the total number of colonising microorganisms showed no significant differences between the groups with and without dry mouth on each side of the prostheses. However, the prevalence of Candida spp. and Staphylococcus spp. in the group with dry mouth was significantly higher than that in the group without dry mouth. The number of microorganisms and moisture levels of palatal obturator prosthesis wearers showed a significantly negative correlation with Candida spp. and Staphylococcus spp., but a positive correlation with Neisseria spp.

CONCLUSION

It was concluded that palatal obturator prosthesis wearers with a dry mouth have greater colonisation by Candida spp. and Staphylococcus spp. than do complete denture wearers.