Comparison of the substrate specificity of two potyvirus proteases

A novel method for synthesizing authentic SARS-CoV-2 main protease

The SARS-CoV-2 main protease (Mpro) plays a crucial role in virus amplification and is an ideal target for antiviral drugs. Currently, authentic Mpro is prepared through two rounds of proteolytic cleavage. In this method, Mpro carries a self-cleavage site at the N-terminus and a protease cleavage site followed by an affinity tag at the C-terminus. This article proposes a novel method for producing authentic Mpro through single digestion. Mpro was constructed by fusing a His tag containing TEV protease cleavage sites at the N-terminus. The expressed recombinant protein was digested by TEV protease, and the generated protein had a decreased molecular weight and significantly increased activity, which was consistent with that of authentic Mpro generated by the previous method. These findings indicated that authentic Mpro was successfully obtained. Moreover, the substrate specificity of Mpro was investigated. Mpro had a strong preference for Phe at position the P2, which suggested that the S2 subsite was an outstanding target for designing inhibitors. This article also provides a reference for the preparation of Mpro for sudden coronavirus infection in the future.

Protein-Based Systems for Translational Regulation of Synthetic mRNAs in Mammalian Cells

Synthetic mRNAs, which are produced by in vitro transcription, have been recently attracting attention because they can express any transgenes without the risk of insertional mutagenesis. Although current synthetic mRNA medicine is not designed for spatiotemporal or cell-selective regulation, many preclinical studies have developed the systems for the translational regulation of synthetic mRNAs. Such translational regulation systems will cope with high efficacy and low adverse effects by producing the appropriate amount of therapeutic proteins, depending on the context. Protein-based regulation is one of the most promising approaches for the translational regulation of synthetic mRNAs. As synthetic mRNAs can encode not only output proteins but also regulator proteins, all components of protein-based regulation systems can be delivered as synthetic mRNAs. In addition, in the protein-based regulation systems, the output protein can be utilized as the input for the subsequent regulation to construct multi-layered gene circuits, which enable complex and sophisticated regulation. In this review, I introduce what types of proteins have been used for translational regulation, how to combine them, and how to design effective gene circuits.

Comparative study of potyvirid NIa proteases and their cleavage sites

Nuclear inclusion a protease (NIaPro), a major protease of potyvirids, processes its cognate viral polyprotein at distinct cleavage sites. Although Potyviridae is the largest family of the realm Riboviria, the individual NIaPro enzymes and their cleavage sites are believed to be species-specific. In the present study, the NIaPro amino acid sequences of 165 potyvirids of 10 genera and their 1154 cleavage sites were compared to understand their genus/species-specificity and functional regulation. Of these, the NIaPro of macluraviruses, maintains a constant length of 217 amino acids, while those of other genera allow variation. In particular, poaceviruses exhibited a broad range of NIaPro amino acid sequence lengths. Alignment of 162 NIaPro amino acid sequences showed that the N- and C-terminal regions allow variations, while the central region, with the catalytic triad and S1 subsite, are highly conserved. NIaPro cleavage sites are composed of seven amino acids (heptapeptide) denoted as P6-P5-P4-P3-P2-P1/P1'. A survey of 1154 cleavage sites showed that the P1 position is predominantly occupied by Gln/Glu, as is seen in picornaviruses. The P6 (Glu), P4 (Val/Cys/Gln), P2 (His/Tyr/Leu), and P1' (Ser/Ala/Gly/Met) positions are predominantly occupied by genus-specific residues, while P5 and P3 are not genus-specific. The 6K2-VPg and VPg-NIaPro junctions possess Glu at the P1 position in order to maintain latency.

Split-Tobacco Etch Virus (Split-TEV) Method in G Protein-Coupled Receptor Interacting Proteins

Split-TEV assay enables the identification of protein-protein interaction in mammalian cells. This method is based on the split of tobacco etch virus (TEV) protease in two fragments, where each fragment is fused to the candidate proteins predicted to interact. If there is indeed an interaction between both proteins, TEV protease reconstitutes its proteolytic activity and this activity is used to induce the expression of some reporter genes. However, some studies have detected unspecific interaction between membrane proteins due to its higher tendency to aggregate. Here we describe a variation of the Split-TEV method developed with the aim to increase the specificity in the study of G protein-coupled receptor (GPCR) interacting proteins. This approach for monitoring interactions between GPCRs is an easy and robust assay and offers good perspectives in drug discovery.

A simplified method for producing laboratory grade recombinant TEV protease from E. coli

The tobacco etch virus (TEV) protease has become a popular choice for cleaving fusion proteins because of its high stringency in sequence recognition. Procedures for isolating recombinant protein from the cytoplasm of E. coli require rupturing of the cell wall via enzymatic treatment combined with sonication or French press. Here we present an expedited method for producing laboratory-grade TEV protease in E. coli using a freeze-thaw method, followed by purification with immobilized metal affinity chromatography. Protease is obtained by expression from the pDZ2087 plasmid in BL21 (DE3) cells. Proteolysis resulting from this product, cleaves a maltose-binding protein fusion to completion at a fusion-to-protease molar ratio of 50:1.

Protease Substrate Identification Using N-terminomics

Proteases are key regulators of vital biological processes, such as apoptosis, cell differentiation, viral infection and neurodegeneration. Proteases are tightly regulated, largely because proteolysis is a unique post-translational modification (PTM) that is essentially irreversible. In order to understand the role of proteases in health and disease, the identification of protease substrates is an important step toward our understanding of their biological functions. Classic approaches for the study of proteolysis in complex mixtures employ gel electrophoresis and mass spectrometry. Such approaches typically identify a few protein substrates at a time but often fail to identify specific cleavage site locations. In contrast, modern proteomic methods using enrichment of proteolytic protein fragments can lead to the identification of hundreds of modified peptides with precise cleavage site determination in a single experiment. In this manuscript, we will review recent advances in N-terminomics methods and highlight key studies that have taken advantage of these technologies to advance our understanding of the role of proteases in cellular physiology.

Expanding Repertoire of Plant Positive-Strand RNA Virus Proteases

Many plant viruses express their proteins through a polyprotein strategy, requiring the acquisition of protease domains to regulate the release of functional mature proteins and/or intermediate polyproteins. Positive-strand RNA viruses constitute the vast majority of plant viruses and they are diverse in their genomic organization and protein expression strategies. Until recently, proteases encoded by positive-strand RNA viruses were described as belonging to two categories: (1) chymotrypsin-like cysteine and serine proteases and (2) papain-like cysteine protease. However, the functional characterization of plant virus cysteine and serine proteases has highlighted their diversity in terms of biological activities, cleavage site specificities, regulatory mechanisms, and three-dimensional structures. The recent discovery of a plant picorna-like virus glutamic protease with possible structural similarities with fungal and bacterial glutamic proteases also revealed new unexpected sources of protease domains. We discuss the variety of plant positive-strand RNA virus protease domains. We also highlight possible evolution scenarios of these viral proteases, including evidence for the exchange of protease domains amongst unrelated viruses.

Discovery of highly divergent lineages of plant-associated astro-like viruses sheds light on the emergence of potyviruses

RNA viruses are believed to have originated from a common ancestor, but how this ancestral genome evolved into the large variety of genomic architectures and viral proteomes we see today remains largely unknown. Tackling this question is hindered by the lack of universally conserved proteins other than the RNA-dependent RNA polymerase (RdRp) as well as a limited RNA virus sampling. The latter is still heavily biased towards relatively few viral lineages from a non-representative collection of hosts, which complicates studies aiming to reveal possible trajectories during the evolution of RNA virus genomes that are favored over others. We report the discovery of 11 highly divergent lineages of viruses with genomic architectures that resemble those of the astroviruses. These genomes were initially identified through a sequence homology search in more than 6600 plant transcriptome projects from the Sequence Read Archive (SRA) using astrovirus representatives as query. Seed-based viral genome assembly of unprocessed SRA data for several dozens of the most promising hits resulted in two viral genome sequences with full-length coding regions, nine partial genomes and a much larger number of short sequence fragments. Genomic and phylogenetic characterization of the 11 discovered viruses, which we coined plastroviruses (plant-associated astro-like viruses), showed that they are related to both astro- and potyviruses and allowed us to identify divergent Serine protease, RdRp and viral capsid domains encoded in the plastrovirus genome. Interestingly, some of the plastroviruses shared different features with potyviruses including the replacement of the catalytic Ser by a Cys residue in the protease active site. These results suggest that plastroviruses may have reached different points on an evolutionary trajectory from astro-like to poty-like genomes. A model how potyviruses might have emerged from (pl)astro-like ancestors in a multi-step process is discussed.

Programmable protein circuits in living cells

Synthetic protein-level circuits could enable engineering of powerful new cellular behaviors. Rational protein circuit design would be facilitated by a composable protein-protein regulation system in which individual protein components can regulate one another to create a variety of different circuit architectures. In this study, we show that engineered viral proteases can function as composable protein components, which can together implement a broad variety of circuit-level functions in mammalian cells. In this system, termed CHOMP (circuits of hacked orthogonal modular proteases), input proteases dock with and cleave target proteases to inhibit their function. These components can be connected to generate regulatory cascades, binary logic gates, and dynamic analog signal-processing functions. To demonstrate the utility of this system, we rationally designed a circuit that induces cell death in response to upstream activators of the Ras oncogene. Because CHOMP circuits can perform complex functions yet be encoded as single transcripts and delivered without genomic integration, they offer a scalable platform to facilitate protein circuit engineering for biotechnological applications.

Boolean Computation in Plants Using Post-translational Genetic Control and a Visual Output Signal

Due to autotrophic growing capacity and extremely rich secondary metabolism, plants should be preferred targets of synthetic biology. However, developments in plants usually run below those in other taxonomic groups. In this work we engineered genetic circuits capable of logic YES, OR and AND Boolean computation in plant tissues with a visual output signal. The circuits, which are deployed by means of Agrobacterium tumefaciens, perform with the conditional activity of the MYB transcription factor Rosea1 from Antirrhinum majus inducing the accumulation of anthocyanins, plant endogenous pigments that are directly visible to the naked eye or accurately quantifiable by spectrophotometric analysis. The translational fusion of Rosea1 to several viral proteins, such as potyvirus NIb or fragments thereof, rendered the transcription factor inactive. However, anthocyanin accumulation could be restored by inserting protease cleavage sites between both moieties of the fusion and by coexpressing specific proteases, such as potyvirus nuclear inclusion a protease.

Screening Fusion Tags for Improved Recombinant Protein Expression in E. coli with the Expresso® Solubility and Expression Screening System

The simplicity, speed, and low cost of bacterial culture make E. coli the system of choice for most initial trials of recombinant protein expression. However, many heterologous proteins are either poorly expressed in bacteria, or are produced as incorrectly folded, insoluble aggregates that lack the activity of the native protein. In many cases, fusion to a partner protein can allow for improved expression and/or solubility of a difficult target protein. Although several different fusion partners have gained favor, none are universally effective, and identifying the one that best improves soluble expression of a given target protein is an empirical process. This unit presents a strategy for parallel screening of fusion partners for enhanced expression or solubility. The Expresso® Solubility and Expression Screening System includes a panel of seven distinct fusion partners and utilizes an extremely simple cloning strategy to enable rapid screening and identification of the most effective fusion partner. © 2017 by John Wiley & Sons, Inc.

Sequence-based prediction of permissive stretches for internal protein tagging and knockdown

BACKGROUND

Internal tagging of proteins by inserting small functional peptides into surface accessible permissive sites has proven to be an indispensable tool for basic and applied science. Permissive sites are typically identified by transposon mutagenesis on a case-by-case basis, limiting scalability and their exploitation as a system-wide protein engineering tool.

METHODS

We developed an apporach for predicting permissive stretches (PSs) in proteins based on the identification of length-variable regions (regions containing indels) in homologous proteins.

RESULTS

We verify that a protein's primary structure information alone is sufficient to identify PSs. Identified PSs are predicted to be predominantly surface accessible; hence, the position of inserted peptides is likely suitable for diverse applications. We demonstrate the viability of this approach by inserting a Tobacco etch virus protease recognition site (TEV-tag) into several PSs in a wide range of proteins, from small monomeric enzymes (adenylate kinase) to large multi-subunit molecular machines (ATP synthase) and verify their functionality after insertion. We apply this method to engineer conditional protein knockdowns directly in the Escherichia coli chromosome and generate a cell-free platform with enhanced nucleotide stability.

CONCLUSIONS

Functional internally tagged proteins can be rationally designed and directly chromosomally implemented. Critical for the successful design of protein knockdowns was the incorporation of surface accessibility and secondary structure predictions, as well as the design of an improved TEV-tag that enables efficient hydrolysis when inserted into the middle of a protein. This versatile and portable approach can likely be adapted for other applications, and broadly adopted. We provide guidelines for the design of internally tagged proteins in order to empower scientists with little or no protein engineering expertise to internally tag their target proteins.

Tobacco Etch Virus protease: A shortcut across biotechnologies

About thirty years ago, studies on the RNA genome of Tobacco Etch Virus revealed the presence of an efficient and specific protease, called Tobacco Etch Virus protease (TEVp), that was part of the Nuclear Inclusion a (NIa) enzyme. TEVp is an efficient and specific protease of 27kDa that has become a valuable biotechnological tool. Nowadays TEVp is a unique endopeptidase largely exploited in biotechnology from industrial applications to in vitro and in vivo cellular studies. A number of TEVp mutants with different rate of cleavage, stability and specificity have been reported. Similarly, a panel of different target cleavage sites, derived from the canonical ENLYFQ-G/S site, has been established. In this review we describe these aspects of TEVp and some of its multiple applications. A particular focus is on the use and molecular biology of TEVp in living cells and organisms.

The functional O-mannose glycan on α-dystroglycan contains a phospho-ribitol primed for matriglycan addition

Multiple glycosyltransferases are essential for the proper modification of alpha-dystroglycan, as mutations in the encoding genes cause congenital/limb-girdle muscular dystrophies. Here we elucidate further the structure of an O-mannose-initiated glycan on alpha-dystroglycan that is required to generate its extracellular matrix-binding polysaccharide. This functional glycan contains a novel ribitol structure that links a phosphotrisaccharide to xylose. ISPD is a CDP-ribitol (ribose) pyrophosphorylase that generates the reduced sugar nucleotide for the insertion of ribitol in a phosphodiester linkage to the glycoprotein. TMEM5 is a UDP-xylosyl transferase that elaborates the structure. We demonstrate in a zebrafish model as well as in a human patient that defects in TMEM5 result in muscular dystrophy in combination with abnormal brain development. Thus, we propose a novel structure—a ribitol in a phosphodiester linkage—for the moiety on which TMEM5, B4GAT1, and LARGE act to generate the functional receptor for ECM proteins having LG domains.

DOI:http://dx.doi.org/10.7554/eLife.14473.001

Functional hemichannels formed by human connexin 26 expressed in bacteria

Gap-junction channels (GJCs) communicate the cytoplasm of adjacent cells and are formed by head-to-head association of two hemichannels (HCs), one from each of the neighbouring cells. GJCs mediate electrical and chemical communication between cells, whereas undocked HCs participate in paracrine signalling because of their permeability to molecules such as ATP. Sustained opening of HCs under pathological conditions results in water and solute fluxes that cannot be compensated by membrane transport and therefore lead to cell damage. Mutations of Cx26 (connexin 26) are the most frequent cause of genetic deafness and it is therefore important to understand the structure–function relationship of wild-type and deafness-associated mutants. Currently available connexin HC expression systems severely limit the pace of structural studies and there is no simple high-throughput HC functional assay. The Escherichia coli-based expression system presented in the present study yields milligram amounts of purified Cx26 HCs suitable for functional and structural studies. We also show evidence of functional activity of recombinant Cx26 HCs in intact bacteria using a new growth complementation assay. The E. coli-based expression system has high potential for structural studies and high-throughput functional screening of HCs.

Human connexin 26 (Cx26) hemichannels (HCs) can be expressed in bacteria in a functional form. This new expression system yields milligram amounts of purified HCs and has high potential to advance studies of connexin HCs.

Protease-based synthetic sensing and signal amplification

The bottom-up design of protein-based signaling networks is a key goal of synthetic biology; yet, it remains elusive due to our inability to tailor-make signal transducers and receptors that can be readily compiled into defined signaling networks. Here, we report a generic approach for the construction of protein-based molecular switches based on artficially autoinhibited proteases. Using structure-guided design and directed protein evolution, we created signal transducers based on artificially autoinhibited proteases that can be activated following site-specific proteolysis and also demonstrate the modular design of an allosterically regulated protease receptor following recombination with an affinity clamp peptide receptor. Notably, the receptor's mode of action can be varied from >5-fold switch-OFF to >30-fold switch-ON solely by changing the length of the connecting linkers, demonstrating a high functional plasticity not previously observed in naturally occurring receptor systems. We also create an integrated signaling circuit based on two orthogonal autoinhibited protease units that can propagate and amplify molecular queues generated by the protease receptor. Finally, we present a generic two-component receptor architecture based on proximity-based activation of two autoinhibited proteases. Overall, the approach allows the design of protease-based signaling networks that, in principle, can be connected to any biological process.

A proximity based general method for identification of ligand and receptor interactions in living cells

Autocrine based selections from intracellular combinatorial antibody and peptide libraries have proven to be a powerful method for selection of agonists and identification of new therapeutic targets. However, success requires a case-by-case construction of a robust selection system which is a process that can be time consuming and expensive. Here we report a general system that takes advantage of the chemical rate acceleration caused by approximation of a membrane tethered ligand and its receptor. The system uses an artificial signal transduction and is, thus, agnostic to the endogenous signal transduction of the receptor-ligand system. This method allows analysis of receptor-ligand interactions and selection of molecules from large libraries that interact with receptors when they are in their natural milieu.

Do-it-yourself histidine-tagged bovine enterokinase: a handy member of the protein engineer's toolbox

Enterokinase, a two-chain duodenal serine protease, activates trypsinogen by removing its N-terminal propeptide. Due to a clean cut after the non-primed site recognition sequence, the enterokinase light chain is frequently employed in biotechnology to separate N-terminal affinity tags from target proteins with authentic N-termini. In order to obtain large quantities of this protease, we adapted an in vitro folding protocol for a pentahistidine-tagged triple mutant of the bovine enterokinase light chain. The purified, highly active enzyme successfully processed recombinant target proteins, while the pentahistidine-tag facilitated post-cleavage removal. Hence, we conclude that producing enterokinase in one's own laboratory is an efficient alternative to the commercial enzyme.

Enzymatic basis for N-glycan sialylation: structure of rat α2,6-sialyltransferase (ST6GAL1) reveals conserved and unique features for glycan sialylation

Glycan structures on glycoproteins and glycolipids play critical roles in biological recognition, targeting, and modulation of functions in animal systems. Many classes of glycan structures are capped with terminal sialic acid residues, which contribute to biological functions by either forming or masking glycan recognition sites on the cell surface or secreted glycoconjugates. Sialylated glycans are synthesized in mammals by a single conserved family of sialyltransferases that have diverse linkage and acceptor specificities. We examined the enzymatic basis for glycan sialylation in animal systems by determining the crystal structures of rat ST6GAL1, an enzyme that creates terminal α2,6-sialic acid linkages on complex-type N-glycans, at 2.4 Å resolution. Crystals were obtained from enzyme preparations generated in mammalian cells. The resulting structure revealed an overall protein fold broadly resembling the previously determined structure of pig ST3GAL1, including a CMP-sialic acid-binding site assembled from conserved sialylmotif sequence elements. Significant differences in structure and disulfide bonding patterns were found outside the sialylmotif sequences, including differences in residues predicted to interact with the glycan acceptor. Computational substrate docking and molecular dynamics simulations were performed to predict and evaluate the CMP-sialic acid donor and glycan acceptor interactions, and the results were compared with kinetic analysis of active site mutants. Comparisons of the structure with pig ST3GAL1 and a bacterial sialyltransferase revealed a similar positioning of donor, acceptor, and catalytic residues that provide a common structural framework for catalysis by the mammalian and bacterial sialyltransferases.

Functional regulation of PVBV Nuclear Inclusion protein-a protease activity upon interaction with Viral Protein genome-linked and phosphorylation

Regulation of NIa-Pro is crucial for polyprotein processing and hence, for successful infection of potyviruses. We have examined two novel mechanisms that could regulate NIa-Pro activity. Firstly, the influence of VPg domain on the proteolytic activity of NIa-Pro was investigated. It was shown that the turnover number of the protease increases when these two domains interact (cis: two-fold; trans: seven-fold) with each other. Secondly, the protease activity of NIa-Pro could also be modulated by phosphorylation at Ser129. A mutation of this residue either to aspartate (phosphorylation-mimic) or alanine (phosphorylation-deficient) drastically reduces the protease activity. Based on these observations and molecular modeling studies, we propose that interaction with VPg as well as phosphorylation of Ser129 could relay a signal through Trp143 present at the protein surface to the active site pocket by subtle conformational changes, thus modulating protease activity of NIa-Pro.

An overview of enzymatic reagents for the removal of affinity tags

Although they are often exploited to facilitate the expression and purification of recombinant proteins, every affinity tag, whether large or small, has the potential to interfere with the structure and function of its fusion partner. For this reason, reliable methods for removing affinity tags are needed. Only enzymes have the requisite specificity to be generally useful reagents for this purpose. In this review, the advantages and disadvantages of some commonly used endo- and exoproteases are discussed in light of the latest information.

Structural determinants of tobacco vein mottling virus protease substrate specificity

Tobacco vein mottling virus (TVMV) is a member of the Potyviridae, one of the largest families of plant viruses. The TVMV genome is translated into a single large polyprotein that is subsequently processed by three virally encoded proteases. Seven of the nine cleavage events are carried out by the NIa protease. Its homolog from the tobacco etch virus (TEV) is a widely used reagent for the removal of affinity tags from recombinant proteins. Although TVMV protease is a close relative of TEV protease, they exhibit distinct sequence specificities. We report here the crystal structure of a catalytically inactive mutant TVMV protease (K65A/K67A/C151A) in complex with a canonical peptide substrate (Ac-RETVRFQSD) at 1.7-Å resolution. As observed in several crystal structures of TEV protease, the C-terminus (∼20 residues) of TVMV protease is disordered. Unexpectedly, although deleting the disordered residues from TEV protease reduces its catalytic activity by ∼10-fold, an analogous truncation mutant of TVMV protease is significantly more active. Comparison of the structures of TEV and TVMV protease in complex with their respective canonical substrate peptides reveals that the S3 and S4 pockets are mainly responsible for the differing substrate specificities. The structure of TVMV protease suggests that it is less tolerant of variation at the P1' position than TEV protease. This conjecture was confirmed experimentally by determining kinetic parameters k(cat) and K(m) for a series of oligopeptide substrates. Also, as predicted by the cocrystal structure, we confirm that substitutions in the P6 position are more readily tolerated by TVMV than TEV protease.

The substrate specificity of Metarhizium anisopliae and Bos taurus carboxypeptidases A: insights into their use as tools for the removal of affinity tags

Carboxypeptidases may serve as tools for removal of C-terminal affinity tags. In the present study, we describe the expression and purification of an A-type carboxypeptidase from the fungal pathogen Metarhizium anisopliae (MeCPA) that has been genetically engineered to facilitate the removal of polyhistidine tags from the C-termini of recombinant proteins. A complete, systematic analysis of the specificity of MeCPA in comparison with that of bovine carboxypeptidase A (BoCPA) was carried out. Our results indicate that the specificity of the two enzymes is similar but not identical. Histidine residues are removed more efficiently by MeCPA. The very inefficient digestion of peptides with C-terminal lysine or arginine residues, along with the complete inability of the enzyme to remove a C-terminal proline, suggests a strategy for designing C-terminal affinity tags that can be trimmed by MeCPA (or BoCPA) to produce a digestion product with a homogeneous endpoint.

Rapid modification of proteins using a rapamycin-inducible tobacco etch virus protease system

Background

The ability to disrupt the function of a specific protein on a rapid time scale provides a powerful tool for biomedical research. Specific proteases provide a potential method to selectively cleave a chosen protein, but rapid control of protease activity is difficult.

Methodology/Principal Findings

A heterologous expression system for rapid target-directed proteolysis in mammalian cells was developed. The system consists of an inducible NIa protease from the tobacco etch virus (TEVp) and a chosen protein into which a TEVp substrate recognition sequence (TRS) has been inserted. Inducible activity was conferred to the TEVp using rapamycin-controlled TEVp fragment complementation. TEVp activity was assayed using a FRET-based reporter construct. TEVp expression was well tolerated by mammalian cells and complete cleavage of the substrate was possible. Cleavage at 37°C proceeded exponentially with a time constant of approximately 150 minutes. Attempts to improve cleavage efficiency were hampered by substantial background activity, which was attributed to inherent affinity between the TEVp fragments. A second TEVp assay, based on changes in inactivation of a modified K_V3.4 channel, showed that functional properties of a channel can be using altered using an inducible TEVp system. Similar levels of background activity and variability were observed in both electrophysiological and FRET assays.

Conclusions/Significance

The results suggested that an optimum level of TEVp expression leading to sufficient inducible activity (with minimal background activity) exists but the variability in expression levels between cells makes the present system rather impractical for single cell experiments. The system is likely to be more suitable for experiments in which the cell-to-cell variability is less of an issue; for example, in experiments involving large populations of cells.

Molecular cloning, overproduction, purification and biochemical characterization of the p39 nsp2 protease domains encoded by three alphaviruses

Alphaviruses cause serious diseases that pose a potential health threat to both humans and livestock. The nonstructural protein 2 (nsp2) encoded by alphaviruses is a multifunctional enzyme that is essential for viral replication and maturation. Its 39-kDa C-terminal domain (nsp2pro) is a cysteine protease that is responsible for cleaving a viral polyprotein at three sites to generate nonstructural proteins 1, 2, 3 and 4. In the present study, we evaluated nsp2pro domains from the following three sources as reagents for site-specific cleavage of fusion proteins: Venezuelan Equine Encephalitis Virus (VEEV), Semliki Forest Virus (SFV) and Sindbis Virus (SIN). All three alphavirus proteases cleaved model fusion protein substrates with high specificity but they were much less efficient enzymes than potyviral proteases from tobacco etch virus (TEV) and tobacco vein mottling virus (TVMV). Oligopeptide substrates were also cleaved with very low efficiency by the alphavirus proteases. We conclude that, in general, alphavirus nsp2pro proteases are not very useful tools for the removal of affinity tags from recombinant proteins although they do remain promising therapeutic targets for the treatment of a variety of diseases.

Specific and efficient cleavage of fusion proteins by recombinant plum pox virus NIa protease

Site-specific proteases are the most popular kind of enzymes for removing the fusion tags from fused target proteins. Nuclear inclusion protein a (NIa) proteases obtained from the family Potyviridae have become promising due to their high activities and stringencies of sequences recognition. NIa proteases from tobacco etch virus (TEV) and tomato vein mottling virus (TVMV) have been shown to process recombinant proteins successfully in vitro. In this report, recombinant PPV (plum pox virus) NIa protease was employed to process fusion proteins with artificial cleavage site in vitro. Characteristics such as catalytic ability and affecting factors (salt, temperature, protease inhibitors, detergents, and denaturing reagents) were investigated. Recombinant PPV NIa protease expressed and purified from Escherichia coli demonstrated efficient and specific processing of recombinant GFP and SARS-CoV nucleocapsid protein, with site F (N V V V H Q▾A) for PPV NIa protease artificially inserted between the fusion tags and the target proteins. Its catalytic capability is similar to those of TVMV and TEV NIa protease. Recombinant PPV NIa protease reached its maximal proteolytic activity at approximately 30 °C. Salt concentration and only one of the tested protease inhibitors had minor influences on the proteolytic activity of PPV NIa protease. Recombinant PPV NIa protease was resistant to self-lysis for at least five days.

Rapid Production of Functionalized Recombinant Proteins: Marrying Ligation Independent Cloning and in Vitro Protein Ligation

Functional genomics and proteomics have been very active fields since the sequencing of several genomes was completed. To assign a physiological role to the newly discovered coding genes with unknown function, new generic methods for protein production, purification, and targeted functionalization are needed. This work presents a new vector, pCYSLIC, that allows rapid generation of Escherichia coli expression constructs via ligation-independent cloning (LIC). The vector is designed to facilitate protein purification by either Ni-NTA or GSH affinity chromatography. Subsequent proteolytic removal of affinity tags liberates an N-terminal cysteine residue that is then used for covalent modification of the target protein with different biophysical probes via protein ligation. The described system has been tested on 36 mammalian Rab GTPases, and it was demonstrated that recombinant GTPases produced with pCYSLIC could be efficiently modified with fluorescein or biotin in vitro. Finally, LIC was compared with the recently developed In-Fusion cloning method, and it was demonstrated that In-Fusion provides superior flexibility in choice of expression vector. By the application of In-Fusion cloning Cys-Rab6A GTPase with an N-terminal cysteine residue was generated employing unmodified pET30a vector and TVMV protease.

Overview and analysis of the polyprotein cleavage sites in the family Potyviridae

SUMMARY The genomes of plant viruses in the family Potyviridae encode large polyproteins that are cut by virus-encoded proteases into ten mature proteins. Three different types of protease have been identified, each of which cuts at sites with a distinctive sequence pattern. The experimental evidence for this specificity is reviewed and the cleavage site patterns are compiled for all sequenced species within the family. Seven of the nine cleavage sites in each species are cut by the viral NIa-Pro and patterns around these sites are related where possible to the active site-substrate interactions recently deduced following the resolution of the crystal structure of Tobacco etch virus (TEV) NIa-Pro (Phan et al., 2002. J. Biol. Chem. 277, 50564-50572). In particular, a revised series of cleavage sites for Sweet potato mild mottle virus (genus Ipomovirus) is proposed with a conserved His at the P1 position. This is supported by homology modelling studies using the TEV structure as a template. The data also provide a standard to correct the annotation of some other published sequences and to help predict these sites in further virus sequences as they become available. Comprehensive data for all sequences of each virus in the family, together with some summaries, have been made available at http://www.rothamsted.bbsrc.ac.uk/ppi/links/pplinks/potycleavage/index.html.