Prodrugs of acyclovir--a computational approach

The landscape of small-molecule prodrugs

Prodrugs are derivatives with superior properties compared with the parent active pharmaceutical ingredient (API), which undergo biotransformation after administration to generate the API in situ. Although sharing this general characteristic, prodrugs encompass a wide range of different chemical structures, therapeutic indications and properties. Here we provide the first holistic analysis of the current landscape of approved prodrugs using cheminformatics and data science approaches to reveal trends in prodrug development. We highlight rationales that underlie prodrug design, their indications, mechanisms of API release, the chemistry of promoieties added to APIs to form prodrugs and the market impact of prodrugs. On the basis of this analysis, we discuss strengths and limitations of current prodrug approaches and suggest areas for future development.

Enzyme Models-From Catalysis to Prodrugs

Enzymes are highly specific biological catalysts that accelerate the rate of chemical reactions within the cell. Our knowledge of how enzymes work remains incomplete. Computational methodologies such as molecular mechanics (MM) and quantum mechanical (QM) methods play an important role in elucidating the detailed mechanisms of enzymatic reactions where experimental research measurements are not possible. Theories invoked by a variety of scientists indicate that enzymes work as structural scaffolds that serve to bring together and orient the reactants so that the reaction can proceed with minimum energy. Enzyme models can be utilized for mimicking enzyme catalysis and the development of novel prodrugs. Prodrugs are used to enhance the pharmacokinetics of drugs; classical prodrug approaches focus on alternating the physicochemical properties, while chemical modern approaches are based on the knowledge gained from the chemistry of enzyme models and correlations between experimental and calculated rate values of intramolecular processes (enzyme models). A large number of prodrugs have been designed and developed to improve the effectiveness and pharmacokinetics of commonly used drugs, such as anti-Parkinson (dopamine), antiviral (acyclovir), antimalarial (atovaquone), anticancer (azanucleosides), antifibrinolytic (tranexamic acid), antihyperlipidemia (statins), vasoconstrictors (phenylephrine), antihypertension (atenolol), antibacterial agents (amoxicillin, cephalexin, and cefuroxime axetil), paracetamol, and guaifenesin. This article describes the works done on enzyme models and the computational methods used to understand enzyme catalysis and to help in the development of efficient prodrugs.

Molecular modeling approaches to address drug-metabolizing enzymes (DMEs) mediated chemoresistance: a review

Resistance against clinically approved anticancer drugs is the main roadblock in cancer treatment. Drug metabolizing enzymes (DMEs) that are capable of metabolizing a variety of xenobiotic get overexpressed in malignant cells, therefore, catalyzing drug inactivation. As evident from the literature reports, the levels of DMEs increase in cancer cells that ultimately lead to drug inactivation followed by drug resistance. To puzzle out this issue, several strategies inclusive of analog designing, prodrug designing, and inhibitor designing have been forged. On that front, the implementation of computational tools can be considered a fascinating approach to address the problem of chemoresistance. Various research groups have adopted different molecular modeling tools for the investigation of DMEs mediated toxicity problems. However, the utilization of these in-silico tools in maneuvering the DME mediated chemoresistance is least considered and yet to be explored. These tools can be employed in the designing of such chemotherapeutic agents that are devoid of the resistance problem. The current review canvasses various molecular modeling approaches that can be implemented to address this issue. Special focus was laid on the development of specific inhibitors of DMEs. Additionally, the strategies to bypass the DMEs mediated drug metabolism were also contemplated in this report that includes analogs and pro-drugs designing. Different strategies discussed in the review will be beneficial in designing novel chemotherapeutic agents that depreciate the resistance problem.

Computational Simulations to Guide Enzyme-Mediated Prodrug Activation

Prodrugs are designed to improve pharmaceutical/biopharmaceutical characteristics, pharmacokinetic/pharmacodynamic properties, site-specificity, and more. A crucial step in successful prodrug is its activation, which releases the active parent drug, exerting a therapeutic effect. Prodrug activation can be based on oxidation/reduction processes, or through enzyme-mediated hydrolysis, from oxidoreductases (i.e., Cytochrome P450) to hydrolytic enzymes (i.e., carboxylesterase). This study provides an overview of the novel in silico methods for the optimization of enzyme-mediated prodrug activation. Computational methods simulating enzyme-substrate binding can be simpler like molecular docking, or more complex, such as quantum mechanics (QM), molecular mechanics (MM), and free energy perturbation (FEP) methods such as molecular dynamics (MD). Examples for MD simulations used for elucidating the mechanism of prodrug (losartan, paclitaxel derivatives) metabolism via CYP450 enzyme are presented, as well as an MD simulation for optimizing linker length in phospholipid-based prodrugs. Molecular docking investigating quinazolinone prodrugs as substrates for alkaline phosphatase is also presented, as well as QM and MD simulations used for optimal fit of different prodrugs within the human carboxylesterase 1 catalytical site. Overall, high quality computational simulations may show good agreement with experimental results, and should be used early in the prodrug development process.

Recent updates in utilizing prodrugs in drug delivery (2013-2015)

INTRODUCTION

Utilizing the prodrug approach as a method to overcome various pharmaceutical and pharmacokinetic barriers to drug delivery is significantly accelerating and achieving successes. In contrast to the older traditional prodrugs which suffer from decreased bioavailability and a high profile of side effects, due to activation at undesired sites, the targeted prodrug approach utilizes delivery systems to improve delivery for a wide range of therapeutics including anti-cancer, anti-bacterial and anti-inflammatory drugs.

AREAS COVERED

Recent updates in utilization of prodrugs in drug delivery between 2013 and 2015 are discussed. Targeted prodrugs against cancer, solid tumors, microbial infections, inflammation and other diseases using advanced delivery systems such as theranostic approaches, siRNA, DOX immunoconjugate, C 60-ser carrier vector, biotinylated prodrug, human serum albumin (HSA) carrier and others are presented.

EXPERT OPINION

Recent research efforts have been directed at developing targeted prodrugs to replace the classical prodrugs. The use of this approach has accelerated following the emergence of encouraging results from several studies on targeted prodrugs that have highlighted their higher efficiency and improved safety profiles. Targeted prodrug delivery is now considered more than a chemical modification method. It is an applicable and promising approach and, in the future, better knowledge and wide application of this approach may be attained which may pave the way for more forward-thinking and creative techniques.

Design, synthesis, and in vitro kinetics study of atenolol prodrugs for the use in aqueous formulations

Based on DFT, MP2, and the density functional from Truhlar group (hybrid GGA: MPW1k) calculations for an acid-catalyzed hydrolysis of nine Kirby's N-alkylmaleamic acids and two atenolol prodrugs were designed. The calculations demonstrated that the amide bond cleavage is due to intramolecular nucleophilic catalysis by the adjacent carboxylic acid group and the rate-limiting step is determined based on the nature of the amine leaving group. In addition, a linear correlation of the calculated and experimental rate values has drawn credible basis for designing atenolol prodrugs that are bitterless, are stable in neutral aqueous solutions, and have the potential to release the parent drug in a sustained release manner. For example, based on the calculated B3LYP/6-31 G (d,p) rates, the predicted t_1/2 (a time needed for 50% of the prodrug to be converted into drug) values for atenolol prodrugs ProD 1-ProD 2 at pH 2 were 65.3 hours (6.3 hours as calculated by GGA: MPW1K) and 11.8 minutes, respectively. In vitro kinetic study of atenolol prodrug ProD 1 demonstrated that the t_1/2 was largely affected by the pH of the medium. The determined t_1/2 values in 1N HCl, buffer pH 2, and buffer pH 5 were 2.53, 3.82, and 133 hours, respectively.

Novel water-soluble prodrugs of acyclovir cleavable by the dipeptidyl-peptidase IV (DPP IV/CD26) enzyme

We herein report for the first time the successful use of the dipeptidyl peptidase IV (DPPIV/CD26) prodrug approach to guanine derivatives such as the antiviral acyclovir (ACV). The solution- and solid-phase synthesis of the tetrapeptide amide prodrug 3 and the tripeptide ester conjugate 4 of acyclovir are reported. The synthesis of the demanding tetrapeptide amide prodrug of ACV 3 was first established in solution and successfully transferred onto solid support by using Ellman's dihydropyran (DHP) resin. In contrast with the valyl ester prodrug (valacyclovir, VACV), the tetrapeptide amide prodrug 3 and the tripeptide ester conjugate 4 of ACV proved fully stable in PBS. Both prodrugs converted to VACV (for 4) or ACV (for 3) upon exposure to purified DPPIV/CD26 or human or bovine serum. Vildagliptin, a potent inhibitor of DPPIV/CD26 efficiently inhibited the DPPIV/CD26-catalysed hydrolysis reaction. Both amide and ester prodrugs of ACV showed pronounced anti-herpetic activity in cell culture and significantly improved the water solubility in comparison with the parent drug.

Design, synthesis and in vitro kinetic study of tranexamic acid prodrugs for the treatment of bleeding conditions

Based on density functional theory (DFT) calculations for the acid-catalyzed hydrolysis of several maleamic acid amide derivatives four tranexamic acid prodrugs were designed. The DFT results on the acid catalyzed hydrolysis revealed that the reaction rate-limiting step is determined on the nature of the amine leaving group. When the amine leaving group was a primary amine or tranexamic acid moiety, the tetrahedral intermediate collapse was the rate-limiting step, whereas in the cases by which the amine leaving group was aciclovir or cefuroxime the rate-limiting step was the tetrahedral intermediate formation. The linear correlation between the calculated DFT and experimental rates for N-methylmaleamic acids 1-7 provided a credible basis for designing tranexamic acid prodrugs that have the potential to release the parent drug in a sustained release fashion. For example, based on the calculated B3LYP/6-31G(d,p) rates the predicted t1/2 (a time needed for 50 % of the prodrug to be converted into drug) values for tranexamic acid prodrugs ProD 1-ProD 4 at pH 2 were 556 h [50.5 h as calculated by B3LYP/311+G(d,p)] and 6.2 h as calculated by GGA: MPW1K), 253 h, 70 s and 1.7 h, respectively. Kinetic study on the interconversion of the newly synthesized tranexamic acid prodrug ProD 1 revealed that the t1/2 for its conversion to the parent drug was largely affected by the pH of the medium. The experimental t1/2 values in 1 N HCl, buffer pH 2 and buffer pH 5 were 54 min, 23.9 and 270 h, respectively.

Computationally designed prodrugs of statins based on Kirby's enzyme model

DFT calculations at B3LYP/6-31G(d,p) for intramolecular proton transfer in Kirby's enzyme models 1-7 demonstrated that the reaction rate is dependent on the distance between the two reacting centers, rGM, and the hydrogen bonding angle, α, and the rate of the reaction is linearly correlated with rGM and α. Based on these calculation results three simvastatin prodrugs were designed with the potential to provide simvastatin with higher bioavailability. For example, based on the calculated log EM for the three proposed prodrugs, the interconversion of simvastatin prodrug ProD 3 to simvastatin is predicted to be about 10 times faster than that of either simvastatin prodrug ProD 1 or simvastatin ProD 2. Hence, the rate by which the prodrug releases the statin drug can be determined according to the structural features of the promoiety (Kirby's enzyme model).

Prodrugs for masking bitter taste of antibacterial drugs--a computational approach

DFT calculations for the acid-catalyzed hydrolysis of several maleamic acid amide derivatives revealed that the reaction rate-limiting step is determined on the nature of the amine leaving group. Further, it was established that when the amine leaving group was a secondary amine, acyclovir or cefuroxime moiety the tetrahedral intermediate formation was the rate-limiting step such as in the cases of acyclovir ProD 1- ProD 4 and cefuroxime ProD 1- ProD 4. In addition, the linear correlation between the calculated and experimental rates provided a credible basis for designing prodrugs for masking bitter taste of the corresponding parental drugs which have the potential to release the parent drug in a sustained release fashion. For example, based on the DFT calculated rates the predicted t₁/₂ (a time needed for 50 % of the reactant to be hydrolyzed to products) for cefuroxime prodrugs, cefuroxime ProD 1- ProD 4, were 12 min, 18 min, 200 min and 123 min, respectively.

Targeted prodrugs in oral drug delivery: the modern molecular biopharmaceutical approach

INTRODUCTION

The molecular revolution greatly impacted the field of drug design and delivery in general, and the utilization of the prodrug approach in particular. The increasing understanding of membrane transporters has promoted a novel 'targeted-prodrug' approach utilizing carrier-mediated transport to increase intestinal permeability, as well as specific enzymes to promote activation to the parent drug.

AREAS COVERED

This article provides the reader with a concise overview of this modern approach to prodrug design. Targeting the oligopeptide transporter PEPT1 for absorption and the serine hydrolase valacyclovirase for activation will be presented as examples for the successful utilization of this approach. Additionally, the use of computational approaches, such as DFT and ab initio molecular orbital methods, in modern prodrugs design will be discussed.

EXPERT OPINION

Overall, in the coming years, more and more information will undoubtedly become available regarding intestinal transporters and potential enzymes that may be exploited for the targeted modern prodrug approach. Hence, the concept of prodrug design can no longer be viewed as merely a chemical modification to solve problems associated with parent compounds. Rather, it opens promising opportunities for precise and efficient drug delivery, as well as enhancement of treatment options and therapeutic efficacy.