The effect of the application of gaseous ozone and ND:YAG laser on glass-fibre post bond strength

Caries effected dentin disinfection using Ozone, methylthioninium chloride and turmeric activated by photodynamic therapy on bond integrity of resin-modified glass ionomer cement

AIM

To evaluate the shear bond strength (SBS) of caries effected dentin (CAD) bonded to resin-modified glass ionomer cement (RMGIC) after being disinfected with different methods their effect on microleakage scores.

MATERIAL AND METHODS

Based on criteria of ICDAS seventy-five teeth were selected and disinfected. All samples were grounded and a cavity prepared followed by random allocation of samples into different disinfection groups i.e., methylene blue photosensitizer (MBP), Silver diamine fluoride (SDF), Ozone (O₃); curcumin photosensitizer (CP) and chlorhexidine (CHX) (n = 15). All samples were restored with resin modified glass ionomer (RMGIC) incrementally. Ten specimens from each group were placed in universal testing machine (UTM) to calculate bond failure and failure type. Five samples from each group were evaluated for microleakage scores. SBS and microleakage scores was examined using analysis of variance (ANOVA) with a Post-hoc test. For all tests p-value, less than 0.5 was considered statistically significant.

RESULTS

The highest SBS was observed in CAD disinfected with CP bonded to RMGIC (16.42 ± 1.10 MPa). Similarly, the lowest bond values were demonstrated by CAD disinfected with MBP (9.21 ± 0.22 MPa) bonded to RMGIC respectively. CAD disinfected with CHX (Control) bonded to RMGIC demonstrated the lowest microleakage scores and showed a significant difference compared to other experimental groups (p< 0.05).

CONCLUSION

Curcumin along with O₃ has the potential to be used as a disinfectant in CAD as it improves SBS to RMGIC. CHX demonstrates low microleakage scores with decrease of bond integrity.

Photodynamic therapy and gaseous ozone versus conventional post space treatment methods on the push-out bond strength of fiber posts luting with different resin cements

BACKGROUND

The aim of this study was to compare the push-out bond strength of fiber posts by using two different resin cement after the treatments of post space with photodynamic therapy, gaseous ozone and conventional disinfection solution.

METHODS

The root canal treatments of one hundred maxillary incisors were performed. The roots were randomly distributed into 5 groups (n = 20). NaOCl of 2.5% + EDTA of 17% in group 1, CHX of 2% in group 2, toluidine blue + diode laser as the photodynamic therapy (PDT) in group 3 and ozone in group 4 were applied to the post spaces. Group 5 was washed with distilled water as control group. Each group was divided into two subgroups according to the adhesive types and the posts were bonded by using RelyX and LinkForce. The bond strength was calculated using the push-out test method. Resin tag formations were photographed with SEM. The push-out bond strength was analyzed by ANOVA and Tukey tests (p = .05).

RESULTS

The PDT group, which showed the highest PBS among the groups bonded with LinkForce at all levels, was significantly higher than Ozone and DW groups (p<.05). NaOCl and ozone treatments provided the highest PBS among the groups bonded with RelyX for all levels and this difference was significant according to the DW group (p < .05).

CONCLUSION

Post space treatments improved the bond strength of the fiber post ​​in both types of resin cement.

Push out bond strength of glass fiber post to radicular dentin irrigated with Nisin and MTAD compared to methylene blue photodynamic therapy

AIM

Present lab-based study intended to appraise the effect of nisin, Mixture of Tetracycline, Acid and Detergent (MTAD), and photodynamic therapy (PDT) when used as a canal disinfectant on push-out bond strength (PBS) of fiber post to radicular dentin MATERIALS AND METHODS: Forty uni-radicular premolar teeth were extracted and disinfected in 0.5 % thymol solution. All specimens were decoronated to achieve standardize root length of 14 mm. Cleaning and shaping of the canal were done using protaper NiTi system. The canal space was dried and obturated. Post space was prepared using peso reamers up to 10 mm length and samples were randomly divided into 4 groups (n = 10). Group 1 irrigated with 10 % Nisin with MTAD, group 2: 1.3 % NaOCl and MTAD, Group 3 irrigated with 2.5 % NaOCl and 17 % EDTA and post space of samples in group 4 with PDT with MTAD. Fiber-reinforced composite post (FRCP) was fitted in canal space using self-etch resin cement. Each sample was cut into 1 mm from coronal, middle, and apical and subjected to PBS via a universal testing machine. For comparison of means, Analysis of variance (ANOVA) and Tukey multiple comparison test was used maintaining the level of significance at p < 0.05.

RESULT

Samples in group 3 post space irrigated with 2.5 % NaOCl and 17 % EDTA demonstrated the highest PBS at all root levels (cervical: 8.83 ± 0.14 MPa, middle: 7.63 ± 0.82 MPa and apical: 5.82 ± 0.32 MPa) in comparison to other tested groups. Whereas, group 1 in which Nisin 10 % with MTAD was used as a canal disinfectant displayed the lowest PBS at all levels (cervical: 6.91 ± 0.54 MPa, middle: 6.15 ± 0.31 MPa, and apical: 3.62 ± 0.68 MPa).

CONCLUSION

Post space irrigated with 1.3 % NaOCl and MTAD shows PBS similar to control group 2.5 % NaOCl and 17 % EDTA. Both types of irrigation methods have potential and can be recommended in clinical scenarios. Whereas, 10 % Nisin and PDT with MTAD as chelator needs further inquiry.

Influence of Propolis, Ozone and Photodynamic therapy in root canal disinfection on resin bond strength to radicular dentin

AIM

The aim of the present study was to assess post space disinfection using different irrigants and their effect on radicular dentin bond to SERC.

MATERIALS AND METHODS

Forty single rooted mandibular 2nd premolars were collected and disinfected. All samples were decoronated maintaining root length of 12 mm and embedded vertically in acrylic resin. Shaping of the canal was performed using reciprocating system. Canals were dried using paper points and obturated with gutta percha via lateral condensation. Peso-reamers were used to create post space up to 10 mm. The post space was irrigated with 1% NaOCl before being randomly allocated into four groups (n = 10) according to different methods of canal disinfection. Samples in group 1 were subjected to photoactivated disinfection (PAD), group 2 irrigated with ethanol based propolis group 3 disinfected using ozone and group 4 irrigated with 2.25 % NaOCl with 17 % EDTA and ECL. GFP was fitted using SERC. Each sample was cut into 1 mm from coronal, middle and apical and subjected to pushout bond strength (PBS) via universal testing machine. Fracture analysis were confirmed by stereomicroscope at 40x magnification. For comparison of means, Analysis of variance (ANOVA) and Tukey multiple comparison test was used maintaining the level of significance at p <  0.05.

RESULTS

The highest PBS at all three levels were found in group 4, canal disinfected with 2.5 % NaOCl with 17 % EDTA and ECYL. Whereas, the lowest PBS was observed in group 1. Inter group comparison, prosthetic space disinfected with propolis extract showed no significant difference to group 4 canal disinfected with 2.5 % NaOCl with 17 % EDTA and ECYL at all three levels (p > 0.05). Intra group comparison in all experimental groups showed no significant difference was noted in coronal and middle thirds of group 1, group 2 and group 3 respectively (p > 0.05).

CONCLUSION

2.5 % NaOCl with EDTA and ECL treatment (group 4) remains the gold standard when used as a final canal irrigant. Propolis can be used as potential irrigant for canal disinfectant provided if the composition becomes standardized.

Effect of different laser types on bonding strength of CAD/CAM-customized zirconia post to root canal dentin: an experimental study

In clinical dentistry, the strength of bonding zirconia posts to root canal dentinal walls currently needs enhancement, and laser application can be an important contribution owing to its features that accommodate adjustable modifications on dental materials. Herein, the effect of different laser treatments applied to dentin surfaces on the strength of bonding zirconia posts to root canal dentinal walls is evaluated by using the pull-out bond strength test in a laboratory setting. A total of 40 single-rooted permanent mandibular premolar teeth that were freshly extracted were used here. The root canal preparation steps were performed using the crown-down technique. Custom-made zirconia posts were produced using CAD/CAM technology. Prior to the application of resin cement, the internal surfaces of the root canals were irradiated using Nd:YAG, Er:YAG, and KTP lasers. Pull-out tests were performed on each specimen by using a universal testing machine. One-way analysis of variance and Tukey post hoc tests were used to compare the pull-out bond strength data. The bond strengths of the laser-treated specimens were greater than those of the untreated controls (p < 0.05). While the value of the pull-out bond strength after Nd:YAG laser treatment was significantly higher than the values obtained after the applications of the Er:YAG and KTP lasers (p < 0.05), the pull-out bond strength after Er:YAG laser treatment was considerably greater than that after KTP laser treatment (p < 0.05). The bond strength between the root canal dentin and the CAD/CAM custom-made zirconia post was improved upon using all the laser modalities in current laboratory settings, among which, application of the Nd:YAG laser was the most successful.

Can intra-radicular cleaning protocols increase the retention of fiberglass posts? A systematic review

The presence of residues within the root canal after post-space preparation can influence the bond strength between resin cement and root dentin when using fiberglass posts (FGPs). Currently, there is no consensus in the literature regarding what is the best solution for the removal of debris after post-space preparation. This systematic review involved "in vitro" studies to investigate if cleaning methods of the root canal after post-space preparation can increase the retention of FGPs evaluated by the push-out test. Searches were carried out in PubMed (MEDLINE) and Scopus databases up to July2017. English language studies published from 2007 to July 2017 were selected. 475 studies were found, and 9 were included in this review. Information from the 9 studies were collected regarding the number of samples, storage method after extraction, root canal preparation, method of post-space preparation, endodontic sealer, resin cement, cleaning methods after post-space and presence of irrigant activation. Five studies presented the best results for the association of sodium hypochlorite (NaOCl) and ethylenediamine tetra-acetic acid (EDTA), while in the other 4 studies, the solutions that showed improved retention of FGPs were photon-induced photoacoustic streaming (PIPS), Qmix, Sikko and EDTA. The results showed heterogeneity in all comparisons due to a high variety of information about cleaning methods, different concentrations, application time, type of adhesive system and resin cements used. In conclusion, this review suggests that the use of NaOCl/EDTA results in the retention of FGPs and may thus be recommended as a post-space cleaning method influencing the luting procedure.