Thromboembolic and infectious complications of total artificial heart implantation

Hydrodynamic Bearing Structural Design of Blood Pump Based on Axial Passive Suspension Stability Analysis of Magnetic–Hydrodynamic Hybrid Suspension System

Rotor suspension stability is one of the important performance indexes of a blood pump and the basis of determining whether the blood pump can be used in a clinic. Compared with the traditional magnetic suspension system, a single-winding, bearingless motor has the advantages of a compact structure, simple control system and low power consumption. In this pursuit, the present study aimed to envisage and design the magnetic suspension system coupled with a single-winding bearingless motor and permanent magnet bearings, establish the theoretical models of axial force and electromagnetic torque, and calculate the stiffness of the magnetic suspension system at the equilibrium point. Addressing the problem of the negative axial stiffness of the magnetic suspension system being negative, which leads to the instability of the suspension rotor, the hydrodynamic bearing structure was proposed and designed, and the critical stiffness to realize the stable suspension of the rotor was obtained based on the stability criterion of the rotor dynamics model. The optimal structural parameters of the hydrodynamic bearing are selected by integrating various factors based on the solution of the Reynolds equation and a stiffness analysis. Furthermore, the vibration experiment results proved that the blood pump rotor exhibited a good suspension stability, and the maximum offset under the impact external fluid was no more than 2 μm.

Infections Associated with Implanted Blood Pumps

A variety of prosthetic blood pumps are currently undergoing experimental development or are available for clinical use. The Jarvik-7® and Jarvik 7-70® (Symbion-7® and Symbion 7-70®) total artificial hearts (TAH) have been used worldwide both experimentally and for clinical mechanical circulatory support. Of the 190 patients implanted with these devices, 133 went on to cardiac transplantation and 68 of the transplanted patients are alive. Complications associated with the use of the TAH have included postoperative hemorrhage, thrombosis with thromboembolism and infection. The incidence of infection in the patients implanted with the TAH has declined significantly since initial clinical use and is now near 30%. Staphylococcus epidermidis and Pseudomonas aeruginosa are the most commonly pathogens isolated from these devices.

Regenerative implants for cardiovascular tissue engineering

A fundamental problem that affects the field of cardiovascular surgery is the paucity of autologous tissue available for surgical reconstructive procedures. Although the best results are obtained when an individual's own tissues are used for surgical repair, this is often not possible as a result of pathology of autologous tissues or lack of a compatible replacement source from the body. The use of prosthetics is a popular solution to overcome shortage of autologous tissue, but implantation of these devices comes with an array of additional problems and complications related to biocompatibility. Transplantation offers another option that is widely used but complicated by problems related to rejection and donor organ scarcity. The field of tissue engineering represents a promising new option for replacement surgical procedures. Throughout the years, intensive interdisciplinary, translational research into cardiovascular regenerative implants has been undertaken in an effort to improve surgical outcome and better quality of life for patients with cardiovascular defects. Vascular, valvular, and heart tissue repair are the focus of these efforts. Implants for these neotissues can be divided into 2 groups: biologic and synthetic. These materials are used to facilitate the delivery of cells or drugs to diseased, damaged, or absent tissue. Furthermore, they can function as a tissue-forming device used to enhance the body's own repair mechanisms. Various preclinical studies and clinical trials using these advances have shown that tissue-engineered materials are a viable option for surgical repair, but require refinement if they are going to reach their clinical potential. With the growth and accomplishments this field has already achieved, meeting those goals in the future should be attainable.

Properties of blood-contacting surfaces of clinically implanted cardiac assist devices: gene expression, matrix composition, and ultrastructural characterization of cellular linings

The development of implantable cardiac assist devices for prolonged circulatory support has been impeded by the problem of excessive thrombogenesis on the blood-prosthetic interface, with subsequent embolization. To overcome this obstacle, a ventricular assist device has been developed with textured blood-contacting surfaces to encourage the formation of a tightly adherent, hemocompatible, biological lining. In this study, we applied molecular biological techniques, in conjunction with conventional ultrastructural and biochemical techniques, to characterize the biological linings associated with the blood-contacting surfaces of 11 of these devices, which had been clinically implanted for durations ranging from 21 to 324 days. No clinical thromboembolic events or pump-related thromboembolism occurred. Biological linings developed on the textured surfaces composed of patches of cellular tissue intermingled with areas of compact fibrinous material. In addition, islands of collagenous tissue containing fibroblast-like cells appeared after 30 days of implantation. Many of these cells contained microfilaments with dense bodies indicative of myofibroblasts. RNA hybridization analyses demonstrated that the colonizing cells actively expressed genes encoding proteins for cell proliferation (histones), adhesion (fibronectin), cytoskeleton (actin, vimentin) and extracellular matrix (types I and III collagen). Linings, which never exceeded 150 microns in thickness, remained free of pathological calcification. Textured blood-contacting surfaces induced the formation of a thin, tightly adherent, viable lining which exhibited excellent long-term hemocompatibility.

Patency and blood flow in gas denucleated arterial prostheses

Biomaterials exposed to blood often fail due to thrombosis. Gas nuclei (air) in the material are thrombogenic and a potential cause of failure. The effects of gas nuclei on patency and blood flow were studied in 4 mm diameter arterial grafts (Gore ePTFE; Johnson and Johnson Vitagraft ePTFE; Bard ACG EXS) in the femoropopliteal position of dogs. Control and denucleated (air-free) grafts were implanted bilaterally. Grafts were denucleated by immersion in degassed saline and exposure to 4 torr vacuum and 3,000-20,000 psig pressure. Graft patency was determined at harvest in 46 dogs. Blood flow was measured with acoustic flow probes in eight dogs. Denucleated graft patency was 60% after 2 days of implant while control patency was 22% (P < .05). Measured blood flow was higher in denucleated grafts than in control grafts (P < .02) in 4 of 5 dogs which had significantly different flows. Patency and flow decreased to zero for both control and denucleated grafts over periods of up to 80 days. Air in the control grafts may have been absorbed within several days, leading to late similarity with the denucleated grafts. Thus, removing the air from 4 mm ePTFE grafts decreased acute thrombosis and increased the patency.

Molecular approaches to the characterization of cell and blood/biomaterial interactions

In order to address questions related to cell/biomaterial interactions with respect to cell function and production of extracellular matrix proteins that support or maintain cell/tissue specific properties, we have developed molecular approaches for analysis of in vivo implanted materials and in vitro studies. In an explant of a human left ventricular assist device (LVAD), intact total cellular RNA could be isolated in sufficient quantities for hybridization analyses with gene-specific probes to evaluate cell growth, cytoskeletal organization, and production of extracellular matrix proteins. Cells harvested from a 132-day implanted LVAD exhibited proliferative activity and expressed genes for fibronectin and collagen types I, III, and IV. In vitro studies revealed that endothelial cells cultured on two different segmented polyurethane biomaterials (Biomer and Tecoflex 60D) exhibited different patterns of gene expression that reflected differences in cell growth rates, morphology, and composition of the extracellular matrix. These methodologies provide a valuable approach for a detailed evaluation of: (1) the biocompatibility of cells colonizing implanted cardiac assist devices; and (2) the functionality of cells seeded onto biomaterials.

The effect of interstitial air on the in vitro thrombogenicity of ePTFE vascular grafts

Gas trapped in the interstices of the biomaterials used for vascular prostheses causes thrombosis, and the process of eliminating this gas is known as denucleation. An apparatus was developed for testing in the in vitro effects of denucleation on 4 mm I.D. expanded polytetrafluoroethylene (ePTFE) Vitagraft (Johnson and Johnson). The apparatus was designed to ensure that neither the blood nor the grafts came in contact with air. Blood from a single donor was incubated with control and denucleated grafts for 5, 10, 15, 20, and 30 minutes. The thrombus volume in the graft lumen was measured with a computer assisted videometric system. Little thrombus formed by 5 or 10 minutes, but there was less thrombus in the denucleated graft than in the control graft at all times. The differences were statistically significant at 15 and 20 minutes (p < 0.05). Denucleation nearly doubled the thrombus formation time. Thrombus was more adherent to denucleated grafts than to control grafts. These results are consistent with in vivo observations in the rat where denucleation decreased thrombus formation and increased patency duration.

Immunologic complications of long-term implantation of a total artificial heart

Bacterial infections are a significant complication of long-term total artificial heart implantation. We evaluated the functional capabilities of host defense mechanisms in two patients sustained long-term by a total artificial heart. Although serum complement and polymorphonuclear leukocyte function remained intact, both patients became B and T lymphopenic and there was an initial decrease in the ratio of helper/inducer to suppressor/cytotoxic cells. Histologic examination of their lymphoidal tissue at autopsy further revealed reduced numbers of germinal centers and atrophy of the T lymphocyte-dependent areas. In addition, the reticuloendothelial system was engorged with degenerate erythrocytes. We hypothesize that blockade of the reticuloendothelial system was induced by multiple blood transfusions necessitated by device-associated hemolysis and coagulopathy. This blockade may have led to a progressive loss of content of the antigen-specific lymphoidal elements and, perhaps, to a reduced ability to ingest microbe-antibody complexes.