Therapeutic potential of implanted tissue-engineered bioartificial muscles delivering recombinant proteins to the sheep heart

Factors mediating spaceflight-induced skeletal muscle atrophy

Skeletal muscle atrophy is a well-known consequence of spaceflight. Because of the potential significant impact of muscle atrophy and muscle dysfunction on astronauts and to their mission, a thorough understanding of the mechanisms of this atrophy and the development of effective countermeasures is critical. Spaceflight-induced muscle atrophy is similar to atrophy seen in many terrestrial conditions, and therefore our understanding of this form of atrophy may also contribute to the treatment of atrophy in humans on Earth. The unique environmental features humans encounter in space include the weightlessness of microgravity, space radiation, and the distinctive aspects of living in a spacecraft. The disuse and unloading of muscles in microgravity are likely the most significant factors that mediate spaceflight-induced muscle atrophy, and have been extensively studied and reviewed. However, there are numerous other direct and indirect effects on skeletal muscle that may be contributing factors to the muscle atrophy and dysfunction seen as a result of spaceflight. This review offers a novel perspective on the issue of muscle atrophy in space by providing a comprehensive overview of the unique aspects of the spaceflight environment and the various ways in which they can lead to muscle atrophy. We systematically review the potential contributions of these different mechanisms of spaceflight-induced atrophy and include findings from both actual spaceflight and ground-based models of spaceflight in humans, animals, and in vitro studies.

Engineering of Human Skeletal Muscle With an Autologous Deposited Extracellular Matrix

Adult skeletal muscle progenitor cells can be embedded in an extracellular matrix (ECM) and tissue-engineered to form bio-artificial muscles (BAMs), composed of aligned post-mitotic myofibers. The ECM proteins which have been used most commonly are collagen type I and fibrin. Fibrin allows for in vitro vasculogenesis, however, high concentrations of fibrinolysis inhibitors are needed to inhibit degradation of the ECM and subsequent loss of BAM tissue structure. For in vivo implantation, fibrinolysis inhibition may prove difficult or even harmful to the host. Therefore, we adapted in vitro culture conditions to enhance the deposition of de novo synthesized collagen type I gradually replacing the degrading fibrin ECM. The in vitro viscoelastic properties of the fibrin BAMs and deposition of collagen were characterized. BAMs engineered with the addition of proline, hydroxyproline, and ascorbic acid in the tissue culture medium had a twofold increase in Young’s Modulus, a 2.5-fold decrease in maximum strain, and a 1.6-fold increase in collagen deposition. Lowering the fibrin content of the BAMs also increased Young’s Modulus, decreased maximum strain, and increased collagen deposition. Tissue engineering of BAMs with autologous ECM may allow for prolonged in vivo survival.

Negating Tissue Contracture Improves Volume Maintenance and Longevity of In Vivo Engineered Tissues

BACKGROUND

Engineering large, complex tissues in vivo requires robust vascularization to optimize survival, growth, and function. Previously, the authors used a "chamber" model that promotes intense angiogenesis in vivo as a platform for functional three-dimensional muscle and renal engineering. A silicone membrane used to define the structure and to contain the constructs is successful in the short term. However, over time, generated tissues contract and decrease in size in a manner similar to capsular contracture seen around many commonly used surgical implants. The authors hypothesized that modification of the chamber structure or internal surface would promote tissue adherence and maintain construct volume.

METHODS

Three chamber configurations were tested against volume maintenance. Previously studied, smooth silicone surfaces were compared to chambers modified for improved tissue adherence, with multiple transmembrane perforations or lined with a commercially available textured surface. Tissues were allowed to mature long term in a rat model, before analysis.

RESULTS

On explantation, average tissue masses were 49, 102, and 122 mg; average volumes were 74, 158 and 176 μl; and average cross-sectional areas were 1.6, 6.7, and 8.7 mm for the smooth, perforated, and textured groups, respectively. Both perforated and textured designs demonstrated significantly greater measures than the smooth-surfaced constructs in all respects.

CONCLUSIONS

By modifying the design of chambers supporting vascularized, three-dimensional, in vivo tissue engineering constructs, generated tissue mass, volume, and area can be maintained over a long time course. Successful progress in the scale-up of construct size should follow, leading to improved potential for development of increasingly complex engineered tissues.

Bioreactors for guiding muscle tissue growth and development

Muscle tissue bioreactors are devices which are employed to guide and monitor the development of engineered muscle tissue. These devices have a modern history that can be traced back more than a century, because the key elements of muscle tissue bioreactors have been studied for a very long time. These include barrier isolation and culture of cells, tissues and organs after isolation from a host organism; the provision of various stimuli intended to promote growth and maintain the muscle, such as electrical and mechanical stimulation; and the provision of a perfusate such as culture media or blood derived substances. An accurate appraisal of our current progress in the development of muscle bioreactors can only be made in the context of the history of this endeavor. Modern efforts tend to focus more upon the use of computer control and the application of mechanical strain as a stimulus, as well as substrate surface modifications to induce cellular organization at the early stages of culture of isolated muscle cells.

Growth, differentiation, transplantation and survival of human skeletal myofibers on biodegradable scaffolds

Skeletal muscle transplantation strategies for muscle repair or gene therapy involve either the injection of proliferating myoblasts followed by fusion with host myofibers or implantation of ex vivo differentiated myofibers; however, both implant procedures are associated with significant cell loss. Biodegradable porous, gas-foamed poly-lactide-co-glycolide (PLG) scaffolds have desirable characteristics for cell transfer and were used to study attachment, growth, differentiation and survival of human myogenic cells. Primary human myoblasts suspended in clinical grade extracellular matrixes (ECMs) and adhered to PLG scaffolds differentiated in vitro into high-density tropomyosin positive myofibers. An immunodeficient non-obese diabetic/severe combined immunodeficiency (NOD/SCID) mouse implant model was used to study the transfer and in vivo survival of differentiated human myofibers on these scaffolds. Scaffold rigidity allowed the myofibers to be maintained under tension in vitro and following subcutaneous transplantation in vivo. Following implantation, myofiber density on the PLG scaffolds decreased linearly by 78% over a 4-week period. ECM composed of either Tisseel fibrin or Zyderm collagen type I did not significantly affect in vivo cell viability over the 4-week period. Varying PLG scaffold microsphere content (10-100%) also had little effect on cell survival in vivo. In contrast, when the residual NK cell population in the immunodeficient NOD/SCID mouse model was depleted with anti-asialo GM1 (ASGM1) antiserum, in vivo cell survival significantly increased from 22% to 34% after 4 weeks. With further improvements in cell survival, PLG scaffolds may prove useful for the implantation of primary human myofibers in future clinical applications.

Neurotization improves contractile forces of tissue-engineered skeletal muscle

Engineered functional skeletal muscle would be beneficial in reconstructive surgery. Our previous work successfully generated 3-dimensional vascularized skeletal muscle in vivo. Because neural signals direct muscle maturation, we hypothesized that neurotization of these constructs would increase their contractile force. Additionally, should neuromuscular junctions (NMJs) develop, indirect stimulation (via the nerve) would be possible, allowing for directed control. Rat myoblasts were cultured, suspended in fibrin gel, and implanted within silicone chambers around the femoral vessels and transected femoral nerve of syngeneic rats for 4 weeks. Neurotized constructs generated contractile forces 5 times as high as the non-neurotized controls. Indirect stimulation via the nerve elicited contractions of neurotized constructs. Curare administration ceased contraction in these constructs, providing physiologic evidence of NMJ formation. Histology demonstrated intact muscle fibers, and immunostaining positively identified NMJs. These results indicate that neurotization of engineered skeletal muscle significantly increases force generation and causes NMJs to develop, allowing indirect muscle stimulation.

Paracrine Release of Insulin-Like Growth Factor 1 from a Bioengineered Tissue Stimulates Skeletal Muscle Growth in Vitro

Bioengineered tissues transduced to secrete recombinant proteins may serve as a long-term delivery vehicle for therapeutic proteins when implanted in vivo. Insulin-like growth factor 1 (IGF1) is an anabolic growth factor for skeletal muscle that can stimulate myoblast proliferation and myofiber hypertrophy. To determine whether the release of IGF1 from an engineered bioartificial skeletal muscle (BAM) could stimulate the growth of skeletal muscle in a paracrine manner, we established an in vitro perfusion system for genetically engineered IGF1 BAMs. BAMs were bioengineered from C2C12 murine myoblasts stably transduced with a retroviral vector to synthesize and secrete IGF1 (C2-IGF1 BAMs). C2-IGF1 BAMs or nontransduced control C2 BAMs were cocultured with avian BAMS (ABAMs) in constantly perfused biochambers. During 11 days of perfusion, IGF1 levels in the C2-IGF1 BAM perfusion medium increased linearly from 1 to 20 ng/mL. The ABAMs maintained in biochambers with the C2-IGF1 BAMs had significantly more myofibers (69%, p < 0.005) and larger myofiber cross-sectional areas (40%, p < 0.001) compared to those cocultured with control C2 BAMs. These studies show that levels of IGF1 secreted from the C2-IGF1 BAMs are sufficient to produce an anabolic paracrine effect on nongenetically engineered BAMs, and the in vitro perfusion system provides a model for screening proteins effective in stimulating localized skeletal muscle growth.

Tissue-Engineered Axially Vascularized Contractile Skeletal Muscle

BACKGROUND

As tissue-engineered muscle constructs increase in scale, their size is limited by the need for a vascular supply. In this work, the authors demonstrate a method of producing three-dimensional contractile skeletal muscles in vivo by incorporating an axial vascular pedicle.

METHODS

Primary myoblast cultures were generated from adult F344 rat soleus muscle. The cells were suspended in a fibrinogen hydrogel contained within cylindrical silicone chambers, and situated around the femoral vessels in isogeneic adult recipient rats. The constructs were allowed to incubate in vivo for 3 weeks, at which point they were explanted and subjected to isometric force measurements and histologic evaluation.

RESULTS

The resulting three-dimensional engineered skeletal muscle constructs produced longitudinal contractile force when electrically stimulated. Length-tension, force-voltage, and force-frequency relationships were similar to those found in developing skeletal muscle. Desmin staining demonstrated that individual myoblasts had undergone fusion to form multinucleated myotubes. Von Willebrand staining showed that the local environment within the chamber was richly angiogenic, and capillaries had grown into and throughout the constructs from the femoral artery and vein.

CONCLUSIONS

Three-dimensional, vascularized skeletal muscle can be engineered in vivo. The resulting tissues have histologic and functional properties consistent with native skeletal muscle.

Angiogenesis-like activity of endothelial cells co-cultured with VEGF-producing smooth muscle cells

A number of strategies have been investigated to improve therapeutic vascularization of ischemic and bioengineered tissues. In these studies, we genetically modified vascular smooth muscle cells (VSMC) to promote endothelial cell proliferation, migration, and formation of microvascular networks. VSMCs were virally transduced to produce vascular endothelial growth factor (VEGF), which acts as a chemoattractant and mitogen of endothelial cells (EC). VSMCs transduced with VEGF(165) cDNA produced significant levels of the protein (2-4 ng/10(5) cell/day). The proliferation of ECs increased after exposure to VEGF-transfected SMCs or their conditioned media. The chemotactic response of ECs to the VEGF-producing cells was explored in two in vitro systems, the modified Boyden chamber assay and a 2-D fence-style migration assay, and both demonstrated increased migration of ECs in response to VEGF-transfected cells. Furthermore, endothelial cells seeded on top of the VEGF-transfected SMCs formed capillary-like structures. These results suggest that VSMCs genetically modified to produce VEGF could be a potential delivery mechanism to enhance endothelial cell migration and subsequent capillary formation, which in turn could improve vascularization of ischemic or regenerating tissue. Furthermore, this system could potentially be used as an in vitro test bed for evaluation of novel angiogenic and anti-angiogenic compounds.

In Vitro Functional Assessment of Human Skeletal Myoblasts After Transduction With Adenoviral Bicistronic Vector Carrying Human VEGF165 and Angiopoietin-1

OBJECTIVES

We report in vitro functional assessment of human skeletal myoblasts with adenoviral bicistronic vector carrying human vascular endothelial growth factor-165 (hVEGF165) and angiopoietin-1 (Ang-1).

METHODS

Myoblasts were assessed for their purity by desmin expression. A replication incompetent adenoviral bicistronic vector (Ad-Bic) carrying both hVEGF165 and Ang-1 was used for transduction of myoblasts. Transduction efficiency was assessed by dual fluorescent immunostaining of the transduced myoblasts. Expression efficiency was analyzed by enzyme linked immunosorbent assay (ELISA), Western blot and reverse transcription polymerase chain reaction (RT-PCR). The biological activity of the secreted human VEGF165 and Ang-1 was determined by human umbilical vein endothelial cells (HUVEC) proliferation assay, Thymidine [H3] incorporation assay and capillary-like structure formation.

RESULTS

The myoblasts preparation was >98% pure. Fluorescent immunostaining showed >95% transduction efficiency. The transduced myoblasts secreted VEGF(165) for up to 30 days after transduction, with peak level (32 +/- 4 ng/ml) at day 8 after transduction as revealed by VEGF ELISA. Western blot further confirmed that both angiogenic factors were actively secreted by transduced myoblasts. The molecular weight was 42 kD for hVEGF165 and 70 kD for Ang-1 respectively. The expression of hVEGF165 and Ang-1 was significantly reduced at day-30 after transduction as seen by RT-PCR. The conditioned medium from bicistronic vector transduced myoblasts stimulated HUVEC to proliferate much faster than other conditioned media (>1.5 folds). Thymidine incorporation assay further confirmed this finding. Matrigel experiment suggested that HUVEC under the condition of both growth factors formed significantly more capillary-like structure.

CONCLUSIONS

The bicistronic vector transduced myoblasts provides a novel strategy for therapeutic angiomyogenesis for cardiac repair.

Myoblast-mediated gene transfer for therapeutic angiogenesis and arteriogenesis

Therapeutic angiogenesis aims at generating new blood vessels by delivering growth factors such as VEGF and FGF. Clinical trials are underway in patients with peripheral vascular and coronary heart disease. However, increasing evidence indicates that the new vasculature needs to be stabilized to avoid deleterious effects such as edema and hemangioma formation. Moreover, a major challenge is to induce new vessels that persist following cessation of the angiogenic stimulus. Mature vessels may be generated by modulating timing and dosage of growth factor expression, or by combination of 'growth' factors with 'maturation' factors like PDGF-BB, angiopoietin-1 or TGF-beta. Myoblast-mediated gene transfer has unique characteristics that make it a useful tool for studying promising novel approaches to therapeutic angiogenesis. It affords robust and long-lasting expression, and can be considered as a relatively rapid form of 'adult transgenesis' in muscle. The combined insertion of different gene constructs into single myoblasts and their progeny allows the simultaneous expression of different 'growth' and 'maturation' factors within the same cell in vivo. The additional insertion of a reporter gene makes it possible to analyze the phenotype of the vessels surrounding the transgenic muscle fibers into which the myoblasts have fused. The effects of timing and duration of gene expression can be studied by using tetracycline-inducible constructs, and dosage effects by selecting subpopulations consistently expressing distinct levels of growth factors. Finally, the autologous cell-based approach using transduced myoblasts could be an alternative gene delivery system for therapeutic angiogenesis in patients, avoiding the toxicities seen with some viral vectors.

Rapid formation of functional muscle in vitro using fibrin gels

The transition of a muscle cell from a differentiated myotube into an adult myofiber is largely unstudied. This is primarily due to the difficulty of isolating specific developmental stimuli in vivo and the inability to maintain viable myotubes in culture for sufficient lengths of time. To address these limitations, a novel method for rapidly generating three-dimensional engineered muscles using fibrin gel casting has been developed. Myoblasts were seeded and differentiated on top of a fibrin gel. Cell-mediated contraction of the gel around artificial anchors placed 12 mm apart culminates 10 days after plating in a tubular structure of small myotubes (10-microm diameter) surrounded by a fibrin gel matrix. These tissues can be connected to a force transducer and electrically stimulated between parallel platinum electrodes to monitor physiological function. Three weeks after plating, the three-dimensional engineered muscle generated a maximum twitch force of 329 +/- 26.3 microN and a maximal tetanic force of 805.8 +/- 55 microN. The engineered muscles demonstrated normal physiological function including length-tension and force-frequency relationships. Treatment with IGF-I resulted in a 50% increase in force production, demonstrating that these muscles responded to hormonal interventions. Although the force production was maximal at 3 wk, constructs can be maintained in culture for up to 6 wk with no intervention. We conclude that fibrin-based gels provide a novel method to engineer three-dimensional functional muscle tissue and that these tissues may be used to model the development of skeletal muscle in vitro.

Polymeric growth factor delivery strategies for tissue engineering

PURPOSE

Tissue engineering seeks to replace and regrow damaged or diseased tissues and organs from either cells resident in the surrounding tissue or cells transplanted to the tissue site. The purpose of this review is to present the application of polymeric delivery systems for growth factor delivery in tissue engineering.

METHODS

Growth factors direct the phenotype of both differentiated and stem cells, and methods used to deliver these molecules include the development of systems to deliver the protein itself, genes encoding the factor, or cells secreting the factor.

RESULTS

Results in animal models and clinical trials indicate that these approaches may be successfully used to promote the regeneration of numerous tissue types.

CONCLUSIONS

Controlling the dose, location, and duration of these factors through polymeric delivery strategies will dictate their utility in tissue regeneration.