The Impact of Anthocyanin-Rich Red Raspberry Extract (ARRE) on the Properties of Edible Soy Protein Isolate (SPI) Films

Development of bioactive and environmentally friendly chitosan-based film using waste of pistachio dehulling process as a novel promising food packaging material

Chitosan films containing different amounts of pistachio hull methanol extract (PHE) (2 %, 4 %, 8 % w/v) were produced. LC-MS/MS analysis demonstrated that tannic acid (207.74 mg/g PHE), gallic acid (46.63 mg/g PHE), protocatechuic acid (27.79 mg/g PHE), quinic acid (16.41 mg/g PHE), isoquercitrin (15.2 mg/g PHE) were the most abundant phenolic compounds in PHE. The biological activity test results indicated that PHE enhanced the antioxidant and antibacterial activities of chitosan films. Chitosan-based films with 8 % PHE showed significant antimicrobial activity on all microorganisms tested. Chitosan films containing even the lowest concentration of PHE effectively inhibited DPPH free radicals, indicating a significant antioxidant activity. The increase in the amount of PHE caused a decrease in the L* value and an increase in the a* and b* values. It was found that the tensile strength and elongation at break of the films containing PHE were higher than those of the control film. Chitosan film with 4 % PHE exhibited the highest values of tensile strength (10.72 ± 1.06 MPa) and elongation at break (198.57 ± 10.34 %). FTIR analysis showed that PHE modified the intermolecular interactions in the film matrix, leading to the expansion of the CC bond and an increase in the intensity of the CO bands. Thermal analysis displayed that chitosan films incorporating PHE exhibited higher thermal stability compared to control films. PHE can be used as a bioactive supportive material in food packaging.

Plant protein-based edible films and the effect of phenolic additives

The use of protein-based films in food preservation has been investigated as an alternative to synthetic plastics in recent years. Being biodegradable, edible, natural, and upcycling from food waste/by-products are the benefits of protein-based edible films. Their use ensures food safety as an alternative to synthetic plastics, and their film-forming properties can be improved with the addition of bioactive compounds. This review summarizes the studies on the changes in certain quality parameters of plant protein-based films, including mechanical, physicochemical, or morphological properties with the use of different forms of phenolic additives (pure phenolics, phenolic extracts, essential oils) and their application in foods during storage. Phenolics affect protein film matrix formation by acting as plasticizers or cross-linking agents and confer additional health benefits by providing bioactive properties to protein films. On the other hand, the effects were more pronounced with the use of their oxidized forms or higher concentrations. Consequently, phenolic additives have great potential to improve protein films, but further studies are still required to investigate the effects and mechanisms of phenolic addition to the protein-based films.

Valorization of Berries' Agro-Industrial Waste in the Development of Biodegradable Pectin-Based Films for Fresh Salmon (Salmo salar) Shelf-Life Monitoring

The healthy properties of berries are known; however, red fruits are very perishable, generating large losses in production and marketing. Nonetheless, these wastes can be revalued and used. The main objective of this study was the development of biodegradable pectin films with berry agro-industrial waste extracts to monitor salmon shelf-life. The obtained extracts from blueberries, blackberries, and raspberries wastes were evaluated in terms of flavonols, phenols and anthocyanins contents, and antioxidant capacity. Then, pectin films with the extracts of different berries were developed and characterized. The results showed that the blueberry extract film was thicker (0.248 mm), darker (L* = 61.42), and opaquer (17.71%), while the highest density (1.477 g/cm3) was shown by the raspberry films. The results also showed that blueberries were the best for further application due to their composition in bioactive compounds, antioxidant capacity, and color change at different pHs. The salmon samples wrapped in blueberry films showed lower values of pH and deterioration of fish during storage compared to the control and pectin samples. This study contributes to the valorization of berries agro-industrial waste by the development of eco-friendly films that can be used in the future as intelligent food packaging materials contributing to the extension of food shelf-life as a sustainable packaging alternative.

Advances in dietary proteins binding with co-existed anthocyanins in foods: Driving forces, structure-affinity relationship, and functional and nutritional properties

Anthocyanins, which are the labile flavonoid pigments widely distributed in many fruits, vegetables, cereal grains, and flowers, are receiving intensive interest for their potential health benefits. Proteins are important food components from abundant sources and present high binding affinity for small dietary compounds, e.g., anthocyanins. Protein-anthocyanin interactions might occur during food processing, ingestion, digestion, and bioutilization, leading to significant changes in the structure and properties of proteins and anthocyanins. Current knowledge of protein-anthocyanin interactions and their contributions to functions and bioactivities of anthocyanin-containing foods were reviewed. Binding characterization of dietary protein-anthocyanins complexes is outlined. Advances in understanding the structure-affinity relationship of dietary protein-anthocyanin interaction are critically discussed. The associated properties of protein-anthocyanin complexes are considered in an evaluation of functional and nutritional values.

Development of Intelligent Gelatin Films Incorporated with Sappan (Caesalpinia sappan L.) Heartwood Extract

This study aimed to develop intelligent gelatin films incorporated with sappan (Caesalpinia sappan L.) heartwood extracts (SE) and characterize their properties. The intelligent gelatin film was prepared through a casting method from gelatin (3%, w/v), glycerol (25% w/w, based on gelatin weight), and SE at various concentrations (0, 0.25, 0.50, 0.75, and 1.00%, w/v). The thickness of the developed films ranged from 43 to 63 μm. The lightness and transparency of the films decreased with the increasing concentration of SE (p < 0.05). All concentrations of gelatin films incorporated with SE exhibited great pH sensitivity, as indicated by changes in film color at different pH levels (pH 1−12). Significant decreases in tensile strength were observed at 1.00% SE film (p < 0.05). The addition of SE reduced gelatin films’ solubility and water vapor permeability (p < 0.05). The chemical and physical interactions between gelatin and SE affected the absorption peaks in FTIR spectra. SE was affected by increased total phenolic content (TPC) and antioxidant activity of the gelatin film, and the 1.00% SE film showed the highest TPC (15.60 mg GAE/g db.) and antioxidant activity (DPPH: 782.71 μM Trolox/g db. and FRAP: 329.84 mM/g db.). The gelatin films combined with SE could inhibit S. aureus and E. coli, while the inhibition zone was not observed for E. coli; it only affected the film surface area. The result suggested that gelatin films incorporated with SE can be used as an intelligent film for pH indicators and prolong the shelf life of food due to their antioxidant and antimicrobial activities.

Guar gum/carboxymethyl cellulose based antioxidant film incorporated with halloysite nanotubes and litchi shell waste extract for active packaging

The incorporation of bioactive extract from the food waste into biopolymers is a promising green approach to fabricate active films with antioxidant activity for food packaging. The present study developed bioactive antioxidant films based on guar gum/carboxymethyl cellulose incorporated with halloysite-nanotubes (HNT) and litchi shell extract (LSE). The effects of combining HNT and LSE on the physical, mechanical, and antioxidant properties of the films were analyzed. The results showed LSE caused a reduction in tensile strength; however, the elongation at break substantially improved from 29.93 to 62.12%. FTIR revealed covalent interaction and hydrogen bonding between guar gum/carboxymethyl cellulose and LSE. The XRD and SEM study confirmed interactions among the polymer matrix and LSE compounds. The addition of LSE to guar gum/carboxymethyl cellulose films notably increased the UV-light barrier properties. Moreover, the antioxidant activity of all GCH/LSE substantially improved from 9.46 to 91.52%, more than a ten-fold increase compared to composite neat GCH film. Finally, the oxidative stability of roasted peanuts packed in fabricated GCH/LSE sachets improved after 8 days. Guar gum/carboxymethyl cellulose containing LSE as an antioxidant agent could be applied as food packaging for low water activity oxygen-sensitive food.

Preparation and characterizations of antibacterial–antioxidant film from soy protein isolate incorporated with mangosteen peel extract

The mangosteen peel extract (MPE) was used to obtain soy protein isolate (SPI) films. The results show that MPE exhibited a high content of total phenolics and antioxidant activity. Moreover, the MPE can enhance the antibacterial–antioxidant properties, UV-visible light barrier properties, and water-resistant properties of the SPI films. The presence of MPE resulted in an increase in water vapor permeability and hydrophobicity. The extract addition also reduced the film’s crystallinity along with a decrease in the mechanical property and lowering of the maximum degradation temperature. Attenuated total reflectance Fourier transform infrared spectroscopy revealed that the polyphenols in MPE could interact with SPI through hydrogen bonds and hydrophobic interactions, and the addition of MPE changed the secondary structure of SPI with a decrease in β-sheets and an increase in β-turns and random coils. Scanning electron microscopy showed that all the films exhibited smooth and homogenous morphology on the surface and on some layers through cross-sectional images. Our results suggested that the MPE would be a promising ingredient to make SPI films used as an active packaging material.

Colorimetric films based on pectin/sodium alginate/xanthan gum incorporated with raspberry pomace extract for monitoring protein-rich food freshness

Raspberry pomace extracts (RPE) with different concentrations (0.5 g/L, 1.5 g/L and 3 g/L) were incorporated into pectin/sodium alginate/xanthan gum composite film (PAX) to prepare colorimetric raspberry films (PAXR₅, PAXR₁₅ and PAXR₃₀). Fourier Transform Infrared and Scanning Electron Microscopy analysis showed RPE had good compatibility with PAX. Compared to PAX, the raspberry films had lower water vapor permeability and water swelling ratio, higher tensile strength, opacity and antioxidant capacity. The films presented a smoother surface and denser structure than PAX. Furthermore, PAXR₁₅ had an excellent discoloration at pH 1-13, especially at pH 5-10, the color changes of PAXR₁₅ from pink-red-brown-blue-dark green distinguished by the naked eyes. Therefore, it has the potential to become a pH-sensitive film used in monitoring protein-rich food freshness.

Compression Molded Soy Protein Films with Exopolysaccharides Produced by Cider Lactic Acid Bacteria

Two exopolysaccharide (EPS)-producing lactic acid bacteria (LAB) strains, Liquorilactobacillus (L.) sp CUPV281 and Liquorilactobacillus (L.) mali CUPV271, were isolated from Spanish apple must. Each of the strains produced a dextran, with different branching degrees, to be incorporated into soy protein isolate (SPI) film-forming formulations. Films were prepared by compression molding, a more rapid processing method than solution casting and, thus, with a greater potential for scaling-up production. Thermal analysis showed that SPI and EPS start the degradation process at temperatures above 190 °C, confirming that the compression temperature selected (120 °C) was well below the corresponding degradation temperatures. Resulting films were transparent and homogeneous, as shown by UV-Vis spectroscopy and SEM, indicating the good compatibility between SPI and EPS. Furthermore, FTIR analysis showed that the interactions between SPI and EPS were physical interactions, probably by hydrogen bonding among the polar groups of SPI and EPS. Regarding antifungal/fungistatic activity, LAB strains used in this study showed an inhibitory effect on germination of fungal spores.

Edible and Functionalized Films/Coatings—Performances and Perspectives

In recent years, food packaging has evolved from an inert and polluting waste that remains after using the product toward an active item that can be consumed along with the food it contains. Edible films and coatings represent a healthy alternative to classic food packaging. Therefore, a significant number of studies have focused on the development of biodegradable enveloping materials based on biopolymers. Animal and vegetal proteins, starch, and chitosan from different sources have been used to prepare adequate packaging for perishable food. Moreover, these edible layers have the ability to carry different active substances such as essential oils—plant extracts containing polyphenols—which bring them considerable antioxidant and antimicrobial activity. This review presents the latest updates on the use of edible films/coatings with different compositions with a focus on natural compounds from plants, and it also includes an assessment of their mechanical and physicochemical features. The plant compounds are essential in many cases for considerable improvement of the organoleptic qualities of embedded food, since they protect the food from different aggressive pathogens. Moreover, some of these useful compounds can be extracted from waste such as pomace, peels etc., which contributes to the sustainable development of this industry.

Active Edible Films Based on Arrowroot Starch with Microparticles of Blackberry Pulp Obtained by Freeze-Drying for Food Packaging

This research work evaluated the influence of the type of incorporation and variation in the concentration of blackberry pulp (BL) and microencapsulated blackberry pulp (ML) powders by freeze-drying on the chemical and physical properties of arrowroot starch films. Blackberry powders were added to the film-forming suspension in different concentrations, 0%, 20%, 30% and 40% (mass/mass of dry starch) and through two different techniques, directly (D) and by sprinkling (S). Scanning electron microscopy (SEM) images revealed that the incorporation of blackberry powder has rendered the surface of the film rough and irregular. Films incorporated with BL and ML powders showed an increase in thickness and water solubility and a decrease in tensile strength in comparison with the film containing 0% powder. The incorporation of blackberry BL and ML powders into films transferred colour, anthocyanins and antioxidant capacity to the resulting films. Films added with blackberry powder by sprinkling were more soluble in water and presented higher antioxidant capacity than films incorporated directly, suggesting great potential as a vehicle for releasing bioactive compounds into food.

Application of a puffer fish skin gelatin film containing Moringa oleifera Lam. leaf extract to the packaging of Gouda cheese

This study aims to develop a puffer fish skin gelatin (PSG) film that contains Moringa oleifera Lam. leaf extract (ME) as a new biodegradable film. With the increase in ME concentration, the tensile strength and elongation at break of the PSG film increased, whereas the oxygen permeability and water vapor permeability decreased. In addition, the PSG film with ME exhibited antimicrobial activity against Listeria monocytogenes and antioxidant activity. To apply the ME-containing PSG film to food packaging, Gouda cheese was wrapped with the ME-containing PSG film. During storage, the cheese packaging with the ME-containing PSG film effectively inhibited the microbial growth and retarded the lipid oxidation of cheese compared with the control sample. Thus, the ME-containing PSG film can be used as an antimicrobial and antioxidative packaging material to improve the quality of food products.

Electrospun nanofibres in agriculture and the food industry: a review

The interesting characteristics of electrospun nanofibres, such as high surface-to-volume ratio, nanoporosity, and high safety, make them suitable candidates for use in a variety of applications. In the recent decade, electrospun nanofibres have been applied to different potential fields such as filtration, wound dressing, drug delivery, etc. and a significant number of review papers have been published in these fields. However, the use of electrospun nanofibres in agriculture is comparatively novel and is still in its infancy. In this paper, the specific applications of electrospun nanofibres in agriculture and food science, including plant protection using pheromone-loaded nanofibres, plant protection using encapsulation of biocontrol agents, preparation of protective clothes for farm workers, encapsulation of agrochemical materials, deoxyribonucleic acid extraction in agricultural research studies, pre-concentration and measurement of pesticides in crops and environmental samples, preparation of nanobiosensors for pesticide detection, encapsulation of food materials, fabrication of food packaging materials, and filtration of beverage products are reviewed and discussed. This paper may help researchers develop the use of electrospun nanofibres in agriculture and food science to address some serious problems such as the intensive use of pesticides. © 2016 Society of Chemical Industry.

Novel food packaging systems with natural antimicrobial agents

A new type of packaging that combines food packaging materials with antimicrobial substances to control microbial surface contamination of foods to enhance product microbial safety and to extend shelf-life is attracting interest in the packaging industry. Several antimicrobial compounds can be combined with different types of packaging materials. But in recent years, since consumer demand for natural food ingredients has increased because of safety and availability, these natural compounds are beginning to replace the chemical additives in foods and are perceived to be safer and claimed to alleviate safety concerns. Recent research studies are mainly focused on the application of natural antimicrobials in food packaging system. Biologically derived compounds like bacteriocins, phytochemicals, enzymes can be used in antimicrobial food packaging. The aim of this review is to give an overview of most important knowledge about application of natural antimicrobial packagings with model food systems and their antimicrobial effects on food products.

Incorporation of phenolic compounds, rutin and epicatechin, into soy protein isolate films: mechanical, barrier and cross-linking properties

Edible films prepared from soy protein isolate (SPI), with and without the phenolic compounds, rutin and epicatechin, as cross linking agents, were tested for their mechanical, optical and water vapour barrier properties. The addition of rutin significantly increased puncture strength (9.3N) over SPI alone (6.4N) whereas epicatechin had no effect. Tensile strengths of SPI films with rutin and epicatechin were similar (35.1 MPa and 22.1 MPa, respectively) and significantly stronger than films without added phenolics (9.3 MPa). SPI films without phenolics showed the greatest flexibility, as measured by tensile elongation. The addition of epicatechin was found to increase water vapour permeability significantly to 2.3 g mm/m(2)h kPa from 1.7 g mm/m(2)h kPa for SPI alone whereas rutin decreased water vapour permeability to 1.2 g mm/m(2)h kPa. Films without phenolics had lower opacity values than had those with phenolics. Findings indicate that rutin and epicatechin may be used as a natural means for improving specific properties of SPI films.

Characterization and antimicrobial properties of food packaging methylcellulose films containing stem extract of Ginja cherry

BACKGROUND

Food contamination and spoilage is a problem causing growing concern. To avoid it, the use of food packaging with appropriate characteristics is essential; ideally, the packaging should protect food from external contamination and exhibit antibacterial properties. With this aim, methylcellulose (MC) films containing natural extracts from the stems of Ginja cherry, an agricultural by-product, were developed and characterized.

RESULTS

The antibacterial activity of films was screened by the disc diffusion method and quantified using the viable cell count assay. The films inhibited the growth of both Gram-positive and Gram-negative strains (Listeria innocua, methicillin-sensitive Staphylococcus aureus, methicillin-resistant S. aureus, Salmonella Enteritidis, Escherichia coli). For the films with lower extract content, effectiveness against the microorganisms depended on the inoculum concentration. Scanning electron microscope images of the films showed that those containing the extracts had a smooth and continuous structure. UV-visible spectroscopy showed that these materials do not transmit light in the UV.

CONCLUSION

This study shows that MC films containing agricultural by-products, in this case Ginja cherry stem extract, could be used to prevent food contamination by relevant bacterial strains and degradation by UV light. Using such materials in food packaging, the shelf life of food products could be extended while utilizing an otherwise wasted by-product.

Mechanical, barrier and morphological properties of pea starch and peanut protein isolate blend films

Mechanical, barrier and morphological properties of edible films based on blends of Pea starch (PS) and Peanut protein isolate (PPI) plasticized with glycerol (30%, w/w) were investigated. As PPI ratio in PS/PPI blends increased, the thickness of films decreased, the opacity slightly elevated and color intensified. The addition of PPI to the PS film significantly reduced tensile strength from 5.44 MPa to 3.06 MPa, but increased elongation from 28.56% to 98.12% with the incorporation of PPI into PS at 50% level. Film solubility value fell from 22.31% to 9.78% upon the incorporation of PPI ranged from 0 to 50% level. When PPI was added into PS film at 40% level, the WVP and WVTR of the films markedly dropped from 11.18% to 4.19% and 6.16 to 1.95%, respectively. Scanning electron microscopy (SEM) of the surface of films showed that many swollen starch granules were presented in the 100% PS film, while 100% PPI film was observed to have rougher surfaces with presence of pores or cavities. The PS/PPI blend films upon the incorporation of PPI at 20% and 50% level were not homogeneous. However, the smoother film surface was observed in PS/PPI blend films with the addition of PPI at 40% level. SEM image of the cross-sections of the films revealed that the 100% PS film showed a uniform and compact matrix without disruption, and pore formation and 100% PPI film displayed a smooth structure. Rougher and flexible network was shown in blend film with the addition of PPI reaching 40% level.