The surface effect of dentifrices

Influence of using different toothpaste during bleaching with violet LED light (405 nm) on the colour and roughness of dental enamel: an in vitro study

This in vitro study aimed to investigate potential changes in the color and roughness of dental enamel resulting from the use of different toothpaste formulations during bleaching with violet LED light (405 nm). Sixty specimens of bovine incisors, each measuring 6 × 6 × 3 mm, were segregated into six distinct experimental groups based on their respective treatments (n = 10): C + VL: Brushing with Colgate® Total 12 + bleaching with violet LED; LB + VL: Brushing with Colgate® Luminous White Brilliant + bleaching with violet LED; LI + VL: Brushing with Colgate® Luminous White Instant + violet LED bleaching; C: Brushing with Colgate® Total 12; LB: Brushing with Colgate® Luminous White Brilliant; LI: Brushing with Colgate® Luminous White Instant. The examined variables included alterations in color (∆L*, ∆a*, ∆b*, ∆Eab, and ∆E00), surface roughness (Ra), and scanning electron microscopy observations. No statistically significant distinctions emerged in total color variations (∆E00 and ∆E) among the groups under scrutiny. Notably, the groups that employed Colgate® Luminous White Instant displayed elevated roughness values, irrespective of their association with violet LED, as corroborated by scanning electron microscopy examinations. It can be concluded that whitening toothpastes associated to violet LED do not influence the color change of dental enamel in fifteen days of treatment. Toothpastes with a higher number of abrasive particles showed greater changes in enamel roughness, regardless of the use of violet LED.

Over-the-counter products in tooth bleaching: A scoping review

OBJECTIVE

To map and summarize the current scientific evidence concerning the active ingredients, effectiveness, and adverse effects of over-the-counter (OTC) bleaching products.

DATA AND SOURCE

This study was conducted according to the PRISMA-ScR guidelines for scoping reviews and registered on the Open Science Framework platform.

STUDY SELECTION

Database searches were conducted in PubMed/MEDLINE, Embase, and Scopus up to January 2024. All in vitro, in situ, and clinical studies evaluating the effectiveness and adverse effects of OTC bleaching products were included. A descriptive analysis of the included studies was performed.

RESULTS

A total of 88 studies were included. Most of them were in vitro studies (n = 49), followed by randomized clinical trials (n = 28). The main OTC bleaching products identified were whitening or stain-removing toothpastes (n = 42), followed by whitening strips (n = 39). Most clinical studies indicate that whitening strips are effective in improving tooth color and providing whitening benefits. In contrast, the bleaching effectiveness of toothpastes, mouth rinses and whitening trays was mainly supported by in vitro studies. The main adverse effects associated with OTC bleaching agents were tooth sensitivity and gingival irritation.

CONCLUSION

A wide variety of OTC bleaching products is available for consumer self-administered use. Clinical studies have mainly confirmed the bleaching effectiveness of whitening strips, while the validation for toothpastes, mouth rinses and whitening trays has mainly relied on in vitro studies. Nevertheless, the use of OTC bleaching products may result in adverse effects, including tooth sensitivity, gingival irritation, and enamel surface changes.

CLINICAL SIGNIFICANCE

Some over-the-counter bleaching products may have whitening properties supported by clinical studies, particularly those containing hydrogen or carbamide peroxide. Nonetheless, clinicians must be aware of the potential risks associated with excessive self-administration of these products, which may result in adverse effects.

Examination of cytotoxic and antimicrobial effect of whitening toothpastes: an in vitro study

OBJECTIVE

Toothpastes are widely used to protect oral and teeth health. This study aims to examine the cytotoxic and antimicrobial effects of whitening toothpastes.

METHODS

In this study, extracts were prepared according to ISO 10993-12:2021 standard (0.2 g/mL) using whitening and conventional toothpastes. The prepared extracts were added to human gingival fibroblast cell lines (HGF-1) in different dilutions (1:1, 1:2, 1:4, 1:8, 1:16, and 1:32) and a cytotoxicity test was performed. Antimicrobial analysis of toothpastes was performed on Streptococcus mutans, Staphylococcus aureus, and Candida albicans using the hole-plate diffusion method. Cell viability and microbial analysis data were examined using two-way analysis of variance (ANOVA) and Tukey post-hoc test (p < 0.05).

RESULTS

Toothpastes with sodium lauryl sulfate (SLS) in their composition showed statistically more toxic effects (p < 0.05). The activated carbon toothpastes without SLS showed over 90% cell viability after dilution. Although the dilution rate of toothpastes containing SLS increased, cell viability remained below 70%. All toothpastes used in the study showed antimicrobial effects on S. mutans, S. aureus, and C. albicans. Toothpaste containing hydrogen peroxide and SLS produced more antibacterial effects than activated carbon, blue covarine, microparticles, and conventional toothpaste.

CONCLUSIONS

SLS-containing toothpastes showed more toxicity on HGF-1 cells. Toothpaste containing hydroxyapatite did not show toxic effects on HGF-1 cells. SLS, sodium lauryl sarcosinate and hydrogen peroxide in toothpastes increase antimicrobial effects.

The Effect of Whitening Toothpastes on the Color Stability of a Smart Monochromatic Composite Resin

OBJECTIVE

The aim of this study was to evaluate the color stability of smart monochromatic composite resin after coloring with coffee solution, thermal aging and brushing with four different kinds of toothpaste.

MATERIALS AND METHODS

According to the manufacturer's instructions, 40 smart monochromatic composite resin (Omnichroma, Tokuyama Dental, Japan) specimens were prepared with a thickness of 2 mm and a diameter of 10 mm. The samples were divided into four groups. The first group (SFM) was brushed with Sensodyne Fresh Mint (Sensodyne GSK, UK), the second group (CW) with Colgate 2 in 1 Whitening (Colgate Palmolive, USA), the third group (OW) with Opalescence Whitening (Ultradent Products, Inc., USA), the fourth group (COW) with Colgate Optic White With Charcoal (Colgate Palmolive, USA). At time point t0, no brushing and thermal cycles were performed. For time point t1, simulations corresponding to 10 days of staining, thermal aging and brushing were performed. For time point t2, simulations corresponding to one year of staining, thermal aging and brushing were performed. The color of all specimens was measured at t0, t1 and t2 with a spectrophotometer. To examine the color change, ΔE00 values were calculated with the CIEDE 2000 color system. Shapiro Wilk, Kolmogorov Smirnov, Wilcoxon Signed Rank, Kruskal Wallis, and Mann-Whitney U tests were used to analyze the data.

RESULTS

According to the results of the intergroup comparison, there is no statistically significant difference between the groups in ΔE00(t0-t1) values in terms of t0-t1 time period measurement (p>0.05). There is a statistically significant difference between the groups in ΔE00(t1-t2)values in terms of t1-t2 time period measurement (p<0.05). The COW group had the lowest ΔE00(t1-t2) value and the OW group had the highest ΔE00(t1-t2) value. There is a statistically significant difference between the groups in ΔE00 (t0-t2) values in terms of t0-t2 time period measurement (p<0.05). The COW group had the lowest ΔE00(t0-t2) value and the OW group had the highest ΔE00(t0-t2) value.

CONCLUSION

The whitening efficacy of different kinds of toothpaste whitening mechanisms may differ from each other. Toothpastes also show whitening on composite resins. The lowest discoloration was observed in the group brushed with toothpaste containing activated charcoal and blue covarine. The efficacy of whitening toothpastes should be supported by in vivo studies.

Effects of whitening toothpastes on the esthetic properties and surface roughness of a composite resin

PURPOSE

The aim of this study was to investigate and compare the effects of some whitening toothpastes on the surface roughness and coloration susceptibility of a composite resin, as well as their whitening effectiveness.

METHODS

This study was carried out in two different stages. In experiment A, samples were divided into 7 subgroups to compare the surface roughness and coloration susceptibility of the composite resin: distilled water, conventional toothpaste, and 5 different whitening toothpastes. In experiment B, samples were divided into 8 subgroups to compare the whitening effectiveness of the whitening toothpastes: conventional toothpaste, 5 other whitening toothpastes, and two bleaching groups. After toothbrushing simulation, the color and surface roughness of the samples were measured. Data were subjected to one-way analysis of variance, paired t-test and Tukey post-hoc test (α = 0.05).

RESULTS

There were no statistically significant differences among the surface roughness values for the groups for any period before and after brushing (P > 0.05). In terms of the coloration susceptibility of the composite resin and the whitening effects of the toothpastes, no statistically significant differences were evident among the groups for any period before and after brushing (P > 0.05).

CONCLUSION

The results of this study indicate that effective toothbrushing is more important than the type of toothpaste employed.

Characterisation of mechanical and surface properties of novel biomimetic interpenetrating alumina-polycarbonate composite materials

OBJECTIVE

To determine the mechanical and surface characteristics of two novel biomimetic interpenetrating phase alumina-polycarbonate (Al₂O₃-PC) composite materials, comprising aligned honeycomb-like porous ceramic preforms infiltrated with polycarbonate polymer.

METHOD

Two composite materials were produced and characterised. Each comprised a porous structure with a ceramic-rich (polymer-poor) top layer, graduated through to a more porous ceramic-poor (polymer-rich) bottom layer. In addition, pure polycarbonate and dense alumina specimens were subjected to the same characterisation namely: density, compression, three-point bend, hardness, surface loss and surface roughness testing. Scanning electron microscopy and micro computerised tomography were employed for structural examination.

RESULTS

Three-dimensional aligned honeycomb-like ceramic structures were produced and full interpenetration of the polymer phase was observed using MicroCT. Depending on the ceramic volume in the initial aqueous ceramic suspension, the density of the final interpenetrating composites ranged from 2.64 to 3.01g/cm³, compressive strength ranged from 192.43 to 274.91MPa, flexural strength from 105.54 to 148.47MPa, fracture toughness from 2.17 to 3.11MPa.m^½, hardness from 0.82 to 1.52GPa, surface loss from 0.71 to 1.40μm and surface roughness, following tooth brushing, from 0.70 to 0.99μm. Composite specimens showed characteristic properties part way between enamel and polycarbonate.

SIGNIFICANCE

There was a correlation between the initial solid ceramic loading in the aqueous suspension, used to produce the porous ceramic scaffolds, and the subsequent characteristic properties of the composite materials. These novel composites show potential as aesthetic orthodontic bracket materials, as their properties fit part way between those of ceramic, enamel and polycarbonate.

Is plaque regrowth inhibited by dentifrice?: A systematic review and meta-analysis with trial sequential analysis

Objectives

The aim of this systematic review was to establish in studies with human participants the effect of a regular fluoride dentifrice compared to water or saline on dental plaque inhibition.

Methods

MEDLINE‐PubMed, Cochrane‐CENTRAL, EMBASE and other electronic databases were searched, up to April 2018. The inclusion criteria were controlled clinical trials among participants aged ≥18 years with good general health. Papers that evaluated the effect of dentifrice slurry compared with water or saline on plaque regrowth during a 4‐day nonbrushing period were included. Data were extracted from the eligible studies, the risk of bias was assessed, and a meta‐analysis was performed where feasible.

Result

The search retrieved eight eligible publications including 25 comparisons. The estimated potential risk of bias was low for all studies. Based on three different indices, overall plaque regrowth was significantly (P < 0.01) inhibited for 0.25 or more by the use of a dentifrice slurry as compared to water. All subanalysis on specific dentifrice ingredients and the overall descriptive analysis supported these findings.

Conclusion

The results of this review demonstrate moderate‐quality evidence for a weak inhibitory effect on plaque regrowth in favour of the use of a dentifrice intended for daily use.

The combined use of a nonabrasive, activator-containing toothpaste and a light emitting diode device improves the onset time of tooth whitening

Objective

The objective of this randomized clinical study was to assess the onset time of the whitening effect of a combined use of a nonabrasive, activator-containing toothpaste and a light emitting diode (LED) device, compared to that of the toothpaste alone.

Materials and Methods

A nonabrasive, activator-containing toothpaste was used twice daily alone or combined with an LED device for 15 days. The onset of the tooth whitening effect was evaluated through tooth color (a* b*, CIELAB) and tooth whiteness (WIO) by image analysis of standardized images. Local tolerance was assessed at days 1, 8, and 15.

Results

On day 8, a significant (P = 0.003) tooth whitening effect compared to day 1 was observed with the toothpaste and the LED device, sustaining until the end of the study. Whitening using the toothpaste alone was significant compared to day 1 after 15 days, only. One subject reported mild redness, itching, and burning on day 1 on the gum of the lower jaw that was possibly related to with the toothpaste. The subject withdrew from the study. No adverse event was reported in the group using the LED device.

Conclusion

Both tooth whitening methods had a significant whitening effect after 15 days of use. However, the onset of whitening was significantly faster when using the nonabrasive, activator-containing toothpaste combined with an LED device. The toothpaste and LED device were both safe.

Randomized clinical study of alterations in the color and surface roughness of dental enamel brushed with whitening toothpaste

OBJECTIVES

This clinical study evaluated the influence of whitening toothpaste on color and surface roughness of dental enamel.

MATERIALS AND METHODS

Initially, the abrasiveness of the toothpastes used (Sorriso Dentes Brancos [SDB]; Colgate Luminous White and Close up White Now) was tested on 30 (n = 10) plexiglass acrylic plates that were submitted to mechanical tooth brushing totalizing 29,200 cycles. Subsequently, 30 participants were selected, and received a toothbrush and nonwhitening toothpaste (SDB). The participants used these products for 7 days and initial color readouts (Spectrophotometer) and surface roughness of one maxillary central incisors was performed after this period of time. For surface roughness readouts, one replica of the maxillary central incisor was obtained by a polyvinyl siloxane impression material (Express) and polyurethane resin. After baseline measurements, participants were separated into three groups (n = 10), according to the toothpaste used. The participants returned after 7, 30, and 90 days when new color readouts and surface roughness were recorded. The measured values were statistically analyzed (2-way-ANOVA, repeated measures, Tukey, P < .05).

RESULTS

Whitening toothpastes did not promote significant (P > .05) color alteration and nor increased the surface roughness of the dental enamel in brushing time of the study.

CONCLUSIONS

The abrasiveness of whitening toothpaste and the brushing trial period did not affect the surface roughness of dental enamel. However, color changes observed on enamel were above the perceptibility and acceptability thresholds reported in the literature.

CLINICAL SIGNIFICANCE

The over-the-counter toothpastes tested had an effect on dental enamel color above the perceptibility and acceptability thresholds but did not change the surface roughness of the teeth.

Establishing the Effect of Brushing and a Day's Diet on Tooth Tissue Loss in Vitro

To develop an in vitro model to mimic the effects of meals equivalent to a day’s diet on tooth tissue loss (TTL). To identify how diet effects tooth wear and to test the efficacy of dental products designed to reduce tooth wear in a more realistic environment. A typical Friday diet was devised comprising: Breakfast then brushing, lunch, dinner then brushing. Groups of enamel samples were exposed to one meal, or all three in series, a control group was exposed to water and brushed. The daily cycle was repeated to represent two days’ consumption; TTL was quantified by non-contact profilometry. This pilot study highlighted adaptions that could be made to the model such as human enamel and saliva to further replicate natural eating habits. The sum of the TTL measured after Breakfast, lunch and dinner (bovine enamel specimens exposed to single meals) was less than that exhibited by the group of samples exposed to the series of meals but this difference was not significant (p = 0.09).In the absence and presence of brushing, TTL caused by breakfast and dinner was similar, but significantly greater than that caused by lunch (p < 0.05). While brushing increased TTL, this increase was not significant. It is possible to model a daily diet in vitro, and the data obtained confirms that the combination of food and drink affects the degree of TTL. This supports the further development of an in vitro model that includes alternative foodstuffs. This would aid understanding of the effects different diets have on TTL and could test new products designed to prevent TTL.

Effect of Whitening Dentifrice on Micro Hardness, Colour Stability and Surface Roughness of Aesthetic Restorative Materials

INTRODUCTION

Whitening agents present in the novel whitening dentifrices may have deleterious effects over the aesthetic restorations.

AIM

The present study evaluated the invitro effect of whitening dentifrice on micro hardness, colour stability and surface roughness on aesthetic restorative materials.

MATERIALS AND METHODS

Forty specimens each of compomer and of composite were prepared using brass mould. Specimens were equally divided into 4 groups. Group I (20 disks of compomer are subjected to brushing with conventional tooth paste) Group II (20 disks of composite subjected to brushing with conventional tooth paste), Group III (20 disks of compomer subjected to brushing with whitening tooth paste). Group IV (20 disks of composite subjected to brushing with whitening toothpaste). Each group was further divided into two subgroups, where 10 sample were subjected for two weeks of brushing with respective tooth paste and other 10 were subjected for four weeks of brushing. For the evaluation of micro hardness, colour stability and surface roughness, micro hardness testing machine, spectrophotometer and surface testing machine were used respectively. Initial and final readings were taken for each specimen and difference obtained was subjected to statistical analysis. One-way ANOVA was used for multiple group comparison followed by post-hoc Tukey's-test. The paried t-test was used for intra group comparison and unpaired t-test for comparing independent sample groups.

RESULTS

The compomer and composite showed no significant difference in micro hardness either with conventional or whitening tooth paste both at two and four weeks. Although there was a highly significant colour change observed after using whitening tooth paste for both compomer and composite. Regarding surface roughness, there was a significant change in roughness in both conventional and whitening tooth paste with compomer and composite. However, whitening tooth paste had a significant change in surface roughness compared with conventional tooth paste. Roughness further increased at four weeks interval when compared to two weeks.

CONCLUSION

Colour, surface-roughness and micro-hardness are the inherent properties of the aesthetic restorative materials. Use of whitening tooth paste will cause colour change and surface roughness of restorative material making it prone to deformation and also affects the clinical success of restoration.

Extrinsic stain removal with a toothpowder: A randomized controlled trial

OBJECTIVES

The efficacy of a commercially available toothpowder was compared with toothpaste in removing extrinsic dental stains.

METHODS

In this single-blind, randomized controlled trial, 77 volunteers were included from a residential professional college. All study subjects (control toothpaste users and test toothpowder users) plaque control measures. All study subjects were instructed to rinse with 5 ml 0.12% chlorhexidine mouthwash for 1 minute, twice and one cup of double tea bag solution three times daily for three weeks. Subjects were randomized into test (n=36) and control (n=36) groups. Toothpaste (control) and toothpowder (test) was used for two weeks to see the effects on removing stains on the labial surfaces of 12 anterior teeth. For measuring dental extrinsic stains Lobene Stain Index (SI) was used.

RESULTS

The amount of stain following the use of toothpaste and toothpowder was more controlled with the experimental toothpowder. For all sites combined, there was evidence that the experimental toothpowder was significantly superior to toothpaste in reducing stain area (p<.001), stain intensity (p<.001) and composite/product (area × intensity) (p<.001).

CONCLUSION

Stain removing efficacy of toothpowder was significantly higher as compared with toothpaste. A toothpowder may be expected to be of benefit in controlling and removing extrinsic dental staining.

Structural and compositional changes in the salivary pellicle induced upon exposure to SDS and STP

Sodium dodecyl sulphate (SDS) and sodium tripolyphosphate (STP) act to remove stained pellicle from dentition and loosen deposits on tooth surfaces that may become cariogenic over time. This study investigated how SDS and STP impact the salivary pellicle adsorbed onto hydroxyapatite and silica sensors using a dual polarisation interferometer and a quartz-crystal microbalance with dissipation. After the pellicle was exposed to SDS and STP the remaining pellicle, although weaker, due to the loss of material, became less dense but with a higher elastic component; suggesting that the viscous component of the pellicle was being removed. This would imply a structural transformation from a soft but dense structured pellicle, to a more diffuse pellicle. In addition, the majority of proteins displaced by both SDS and STP were identified as being acidic in nature; implying that the negatively charged groups of SDS and STP may be responsible for the displacement of the pellicle proteins observed.

Stain removal efficacy of a novel dentifrice containing papain and Bromelain extracts--an in vitro study

OBJECTIVE

To assess the in vitro stain removal efficacy of a novel commercially available dentifrice.

MATERIALS AND METHODS

Twenty four human molar teeth (12 in test and 12 in control group) were cut to obtain enamel specimens approximately 9 mm(2) and placed on a microscopic slide using mounting adhesive. They were cycled in human saliva, staining model and dried for brushing regimen using a customized brushing apparatus. Lightness values were recorded at baseline, after staining and after brushing regimen using Adobe Photoshop software. Stain removal efficacy was tested using the either of the two dentifrice slurries for 2 one minute brushing cycles.

RESULTS

The mean lightness increment for test and control after brushing regimen was 13.7 ± 6.35 and 3.16 ± 1.29 respectively. There was statistically significant difference in percentage removal of stains for test and control groups (66.99 ± 9.57 and 25.89 ± 16.2 P < 0.001).

CONCLUSION

There was significant stain removal with new whitening dentifrice when compared with control. Further clinical trials are recommended to evaluate this significant difference.

Brushing with and without dentifrice on gingival abrasion

OBJECTIVES

This study was designed to evaluate two factors possibly influencing incidence of gingival abrasion during toothbrushing: (1) the abrasiveness of a dentifrice and (2) the possible influence of feedback of oral sensory perception.

MATERIAL AND METHODS

For this purpose, two separate, single blind, randomized clinical experiments were performed. The two groups of subjects were requested not to brush their teeth 48 h, prior to the experiments. After staining with disclosing solution gingival abrasion sites were recorded as small (< or =5 mm) and large (>5 mm), both before and after brushing. The dentifrice experiment was a split-mouth design, including 36 subjects, brushing their teeth in two randomly selected contra-lateral quadrants, either with or without dentifrice, whereas the remaining two quadrants were brushed, using the alternative choice. The sensory perception feedback experiment was a full-mouth design, including 43 subjects and two separate brushing exercises with use of dentifrice. The first brushing-exercise was performed by a dental hygienist, excluding the feedback of oral sensory perception of the brusher. After a 4 weeks period of familiarization to the manual toothbrush, subjects brushed themselves in the same random order as the hygienist, using a fresh brush, thus including oral sensory perception.

RESULTS

In the dentifrice experiment, the increment of small abrasion sites was 5.86 for brushing with and 5.75 without dentifrice. There was no statistically significant difference between brushing with and without dentifrice. Both with and without dentifrice, more small abrasions were found vestibular, (3.78 and 4.22, respectively) as compared with lingual (2.22 and 1.42, respectively) (p=0.027, p<0.001). In the sensory perception feedback experiment, the increment in small gingival abrasion sites was larger for the subjects brushing themselves (8.86) as compared with the professional brushing (2.94, p <0.0001). Subjects caused more abrasion on the vestibular surfaces (6.28) as compared with the lingual (0.60, p=0.0001), where the professional did not show this difference (vestibular: 1.88, lingual: 1.30, p=0. 1388).

CONCLUSIONS

No statistically significant difference in the incidence of gingival abrasion was found between brushing with dentifrice or without dentifrice. Neither did oral sensory perception seem to affect the incidence of gingival abrasion.

Abrasion of eroded root dentine brushed with different toothpastes

This study evaluated the surface roughness change and wear provided by different dentifrices on root dentine previously exposed to erosive challenges. According to a randomized complete block design, 150 slabs of bovine root dentine (6 x 3 x 2 mm) were ground flat and polished. In an area of 4 x 3 mm on the dentine surface, specimens were submitted to five erosive/abrasive events, each one composed by: exposure to Sprite Diet or distilled water for 5 min, then to a remineralizing solution for 1 min, and simulation of 5,000 brushing strokes. Four dentifrices--regular (RE), baking soda (BS), whitening (WT) and tartar control (TC)--and distilled water (CO), used as control, were compared. Final texture and the wear depth were evaluated using a profilometer. ANOVA did not show significant interaction, indicating that the effect of dentifrices on both surface roughness change and wear did not depend on whether or not the dentine was eroded ( p>0.05). There was no difference between abrasion of eroded and sound dentine. The Tukey's test revealed that WT, BS and TC provided the highest increase in surface roughness differing from RE and CO. TC yielded the deepest wear of root dentine, whereas RE and CO, the shallowest. No significant difference in wear among BS, TC and WT were observed. Within the limitations of this study, the data showed that abrasion of both eroded and sound root dentine was dependent on the dentifrice used.