Hydroxypropylmethylcellulose films for the ophthalmic delivery of diclofenac sodium

Exploiting Polymeric Films as a Multipurpose Drug Delivery System: a Review

Polymeric films are drug delivery systems that maintain contact with the delivery tissue and sustain a controlled release of therapeutic molecules. These systems allow a longer time of drug contact with the target site in the case of topical treatments and allow the controlled administration of drugs. They can be manufactured by various methods such as solvent casting, hot melt extrusion, electrospinning, and 3D bioprinting. Furthermore, they can employ various polymers, for example PVP, PVA, cellulose derivatives, chitosan, gelling gum, pectin, and alginate. Its versatility is also applicable to different routes of administration, as it can be administered to the skin, oral mucosa, vaginal canal, and eyeballs. All these factors allow numerous combinations to obtain a better treatment. This review focuses on exploring some possible ways to develop them and some particularities and advantages/disadvantages in each case. It also aims to show the versatility of these systems and the advantages and disadvantages in each case, as they bring the opportunity to develop different medicines to facilitate therapies for the most diverse purposes .

Development and Optimization of Chitosan-Hydroxypropyl Methylcellulose In Situ Gelling Systems for Ophthalmic Delivery of Bupivacaine Hydrochloride

The aim of this study was the development and optimization of chitosan and hydroxypropyl methylcellulose (HPMC) in situ gelling systems, loaded with bupivacaine hydrochloride for topical ocular administration. This study is based on the properties of two polymers: chitosan, which has mucoadhesive action and is a pH-sensitive polymer, but also the cellulose derivative hydroxypropyl methylcellulose, a thermosensitive polymer which has mucoadhesive properties and increases the viscosity of systems. The analysis and optimization of in situ gelling systems were performed based on an experimental design and response surface methodology. The following formulation parameters were considered: X1 = chitosan concentration (0.5%, 1%), X2 = HPMC E 5 LV concentration (2%, 5%) and X3 = Chitosan/HPMC E 5 LV ratio (1/1, 2/1). In addition, the parameters to be optimized were represented by the contact angle (CA (°)), viscosity and cumulative percentage of bupivacaine hydrochloride released in vitro. The results indicate that the designed in situ gelling systems are suitable for bupivacaine prolonged ophthalmic release and overcome the principal disadvantages of the liquid’s ocular formulations. An immediate therapeutic effect corresponding to ocular anesthetic installation was assured in the first stage: burst bupivacaine release. In the second phase, the gradual drug release was assured for over 6 h. This drug release profile, together with the corresponding rheological profile and a collection of superficial properties for good ocular adhesion balanced with an adequate hydrophilic character, assured the desired quality of the attributes for the proposed systems. The system, based on chitosan 1%, HPMC E 5 LV 5% and a 1/1 polymer ratio, could be a solution for the proposed formulation of in situ gelling colloidal systems, since the viscosity of the system was within the range of the optimal viscosity of the eye, and the amount of bupivacaine hydrochloride released after 6 h was the highest at 69.55%.

Vildagliptin plasticized hydrogel film in the control of ocular inflammation after topical application: study of hydration and erosion behaviour

Vildagliptin (VID) is a dipeptidyl peptidase-4 (DPP-4) inhibitor used in controlling blood glucose level in type 2 diabetes. Vildagliptin improves beta cells function and is also suggested to effectively control the inflammation. The possible ocular anti-inflammatory property of vildagliptin has been explored using topically applied plasticized ocular film formulation. Film formulation was prepared by solvent cast and evaporation method using triethanolamine (TEA), dimethyl sulphoxide (DMSO), and polyethylene glycol 400 (PEG 400) as the plasticizer in HPMC hydrogel matrix base. Anti-inflammatory study was carried out in the carrageenan induced ocular rabbit model. Analytical methods confirmed that the drug was present almost in completely amorphized form in the film formulation. Level of hydration, swelling and erosion rate of the film played the controlling factor in the process of drug release, ocular residence and permeation. Maximum swelling rate of 363 h−1 has been shown by VHT compared to other formulation of VHD and VHP (174 and 242 h−1 respectively). Film containing DMSO exhibited highest in vitro release as well as ex vivo ocular permeation. Film formulation has shown a fast recovery of ocular inflammation in contrast to the untreated eye after inducing inflammation. Plasticized vildagliptin hydrogel film formulation could be utilized in the management and control of ocular inflammation particularly with diabetic retinopathy after proper clinical studies in higher animal and human individuals.

Formulation and evaluation of thermosensitive flurbiprofen in situ nano gel for the ocular delivery

The contemporary research implicates the formulation and evaluation of a thermosensitive in situ nano gelling method to improve solubility and ocular residence time of flurbiprofen. This study was carried out in two phases. In the first phase, an insolubility drug has been formulated in the form of a nanoparticulate system and evaluated for its characteristics. The nanoparticles obtained demonstrated an average size array of 150 to 250 nm in diameter, up to 79.35% encapsulation efficiency, and up to 93.42% drug release throughout 2 h. In the second phase, nanoparticulate systems were dispersed in aqueous solutions of Pluronic F 127 (14%) and various concentrations of Carbopol 934 in combination to form an in situ nano gel. The prepared in situ gel was investigated for its physicochemical properties like pH, flowability, sol-gel transition temperature, gelling capacity, and rheological properties. Carbopol 934 did not significantly affect sol-gel transition temperature in optimized concentration (<0.3%) but altered gelling capacity, pH, and transparency of the formulations. In vivo resident time and eye irritation test was evaluated in the rabbit eye. In optimized in situ gelling formulation (NIGF3), approximately 95% of in vitro drug release was observed after 6 h. NIGF3 increased precorneal residence time and high concentration in aqueous humor when paralleled to flurbiprofen eye drops. Greater concentration of drug in aqueous humor was due to its improved saturation solubility of the drug, and amplified residence time was attributed to the formation of gel matrix-embedded nanoparticles. This demonstrated that in situ nano gels (NIGF3) comprehending aqueous solutions of 0.3% w/v concentrations of Carbopol 934 with Pluronic F 127 may ominously persist the residence time and mend bioavailability of a water-insoluble drug.

Hydroxypropyl methylcellulose: Physicochemical properties and ocular drug delivery formulations

Hydroxypropyl methylcellulose (HPMC) is a cellulose ether widely used in drug formulations due to its biocompatibility, uncharged nature, solubility in water and thermoplastic behavior. Particularly for ocular and ophthalmic formulations, HPMC is applied as viscosity enhancer agent in eye drops, gelling agent in injections, and polymeric matrix in films, filaments and inserts. The different therapeutic approaches are necessary due to the complex anatomic structure of the eye. The natural ocular barriers and the low drug permeation into the circulatory system make the drug administration challenging. This review presents the eye anatomy and the usual local routes of drugs administration, which are facilitated by the physicochemical properties of HPMC. The relationship between chemical structure and physicochemical properties of HPMC is displayed. The different types of formulations (local application) including HPMC for ocular drug delivery are discussed with basis on recent literature reports and patents.

Development of a topical tissue cross-linking solution using sodium hydroxymethylglycinate (SMG): viscosity effect

Hyperviscosity agents are commonly used in ophthalmic formulations for improving corneal drug penetration by increasing tissue contact time. One such viscosity agent is hydroxypropyl methylcellulose (HPMC). HPMC has been used in riboflavin solutions for photochemical UVA cross-linking (CXL). Sodium hydroxymethylglycinate (SMG) is a small molecule formaldehyde releaser that can function as a therapeutic tissue cross-linker for corneal and scleral applications. The present study was undertaken in order to study formulation factors using HPMC and SMG that could positively influence the cross-linking effect in these ocular tissues. Formulations containing 10 mM SMG and 100 mM sodium bicarbonate were prepared with varying HPMC concentrations from 0 to 4.4%. Their cross-linking effects on porcine and rabbit eyes were measured using differential scanning calorimetry (DSC), expressed as the change/difference in melting temperature (ΔT_m) compared with the control. SMG in 4.4% HPMC solution resulted in ΔT_m of 6.3 ± 1.21, while other concentration showed no differences in T_m shift on porcine cornea. In ex vivo rabbit cornea, there was a trend toward an increasing cross-linking effect with higher viscosity albeit mild differences. While a significant T_m shift was observed in porcine and rabbit sclera, there was no difference in effect of cross-linking between four HPMC concentrations. Increasing the HPMC concentration does not negatively affect the cross-linking efficacy attributed by SMG and could still be a positive cross-linking enhancer by virtue of increasing tissue contact time in a dynamic biological system. This information will be useful for planning further animal and human studies.

Applications of bacterial-synthesized cellulose in veterinary medicine – a review

Tissue engineering promotes tissue regeneration through biomaterials that have excellent properties and have the potential to replace tissues. Many studies show that bacterial cellulose (BC) might ensure tissue regeneration and substitution, being used for the bioengineering of hard, cartilaginous and soft tissues. Bacterial cellulose is extensively used as wound dressing material and results show that BC is a promising tissue scaffold (bone, cardiovascular, urinary tissue). It can be combined with polymeric and non-polymeric compounds to acquire antimicrobial, cell-adhesion and proliferation properties. To ensure proper tissue regeneration, the material has to be: biocompatible, with minimum tissue reaction and biodegradability; bio-absorbable, to promote tissue development, cellular interaction and grow; resistant to support the weight of the newly formed tissue. Its versatile structure, physical and biochemical properties can be adjusted by adapting the bacteria culturing conditions. The main biomedical applications seem to be as hard (bone, dental), fibrocartilaginous (meniscal) and soft tissue (skin, cardiovascular, urinary) substituents. This paper reviews the current state of knowledge, challenges and future applications of BC and its biomedical potential in veterinary medicine. It was focused on the main uses in regeneration and scaffold tissue replacement and, although BC showed promising results, there is a lack of successful results of BC use in clinical practice. Most studies were performed only at experimental level and further research is needed for BC to enter clinical veterinary practice.

Parenteral nanosuspensions: a brief review from solubility enhancement to more novel and specific applications

Advancements in in silico techniques of lead molecule selection have resulted in the failure of around 70% of new chemical entities (NCEs). Some of these molecules are getting rejected at final developmental stage resulting in wastage of money and resources. Unfavourable physicochemical properties affect ADME profile of any efficacious and potent molecule, which may ultimately lead to killing of NCE at final stage. Numerous techniques are being explored including nanocrystals for solubility enhancement purposes. Nanocrystals are the most successful and the ones which had a shorter gap between invention and subsequent commercialization of the first marketed product. Several nanocrystal-based products are commercially available and there is a paradigm shift in using approach from simply being solubility enhancement technique to more novel and specific applications. Some other aspects in relation to parenteral nanosuspensions are concentrations of surfactant to be used, scalability and in vivo fate. At present, there exists a wide gap due to poor understanding of these critical factors, which we have tried to address in this review. This review will focus on parenteral nanosuspensions, covering varied aspects especially stabilizers used, GRAS (Generally Recognized as Safe) status of stabilizers, scalability challenges, issues of physical and chemical stability, solidification techniques to combat stability problems and in vivo fate.

Influence of chemical and physical conditions in selection of Gluconacetobacter hansenii ATCC 23769 strains with high capacity to produce bacterial cellulose for application as sustained antimicrobial drug-release supports

AIMS

Obtain varieties of Gluconacetobacter hansenii from original strain ATCC 23729 with greater efficiency to produce bacterial cellulose (BC) membrane with better dry mass yield for application as support of sustained antimicrobials' drug release.

METHODS AND RESULTS

Application of different chemical and physical conditions (pH, temperature and UV light exposure) to obtain different G. hansenii varieties with high capacity to produce BC membranes. Characterization of the G. hansenii variants was performed by scanning electron microscopy (SEM) and optical microscopy of the colony-forming units. BC membrane produced was characterized by SEM, infrared spectroscopy and X-ray diffraction. The BC produced by variants isolated after incubation at 35°C showed elevated dry mass yield and high capacity of retention and sustained release of ceftriaxone antibiotic with the produced BC by original G. hansenii ATCC 23769 strain subjected to incubation at 28°C and with commercial BC.

CONCLUSION

The application of different chemical and physical conditions constitutes an important method to obtain varieties of micro-organisms with dissimilar metabolism advantageous in relation to the original strain in the BC production.

SIGNIFICANCE AND IMPACT OF THE STUDY

These results demonstrate the importance of in vivo studies for the application, in medicine, of BC membranes as support for antimicrobial-sustained release for the skin wound treatment.

Stabilizing Agents for Drug Nanocrystals: Effect on Bioavailability

Drug nanocrystals are a versatile option for drug delivery purposes, and while the number of poorly soluble drug materials is all the time increasing, more research in this area is performed. Drug nanocrystals have a simple structure-a solid drug core is surrounded by a layer of stabilizing agent. However, despite the considerably simple structure, the selection of an appropriate stabilizer for a certain drug can be challenging. Mostly, the stabilizer selection is based purely on the requirement of physical stability, e.g., maintaining the nanosized particle size as long as possible after the formation of drug nanocrystals. However, it is also worth taking into account that stabilizer can affect the bioavailability in the final formulation via interactions with cells and cell layers. In addition, formation of nanocrystals is only one process step, and for the final formulation, more excipients are often added to the composition. The role of the stabilizers in the final formulation can be more than only stabilizing the nanocrystal particle size. A good example is the stabilizer's role as cryoprotectant during freeze drying. In this review, the stabilizing effect, role of stabilizers in final nanocrystalline formulations, challenges in reaching in vitro-in vivo correlation with nanocrystalline products, and stabilizers' effect on higher bioavailability are discussed.

Nanomedicine approaches for corneal diseases

Corneal diseases are the third leading cause of blindness globally. Topical nonsteroidal anti-inflammatory drugs (NSAIDs), steroids, antibiotics and tissue transplantation are currently used to treat corneal pathological conditions. However, barrier properties of the ocular surface necessitate high concentration of the drugs applied in the eye repeatedly. This often results in poor efficacy and several side-effects. Nanoparticle-based molecular medicine seeks to overcome these limitations by enhancing the permeability and pharmacological properties of the drugs. The promise of nanomedicine approaches for treating corneal defects and restoring vision without side effects in preclinical animal studies has been demonstrated. Numerous polymeric, metallic and hybrid nanoparticles capable of transporting genes into desired corneal cells to intercept pathologic pathways and processes leading to blindness have been identified. This review provides an overview of corneal diseases, nanovector properties and their applications in drug-delivery and corneal disease management.

Effects of ethanol and diclofenac on the organization of hydrogenated phosphatidylcholine bilayer vesicles and their ability as skin carriers

In this study, the effects of ethanol and/or diclofenac on vesicle bilayer structure have been studied. Liposomes with hydrogenated soy phosphatidylcholine, cholesterol and two different concentrations of diclofenac sodium (5 and 10 mg/ml) were obtained. In addition, ethanol was mixed in the water phase at different concentrations (5, 10 and 20 % v/v) to obtain ethosomes. To characterize vesicles, rehological analysis were carried out to investigate the intervesicle interactions, while bilayer structure was evaluated by small- and wide-angle X-ray scattering. Finally, the ethanol and/or diclofenac concentration-dependent ability to improve diclofenac skin delivery was evaluated in vitro. The addition of 20 % ethanol and/or diclofenac led to solid-like ethosome dispersion due to the formation of a new intervesicle structure, as previously found in transcutol containing vesicle dispersions. However, when using 5-10 % of ethanol the induction to form vesicle interconnections was less evident but the simultaneous presence of the drug at the highest concentration facilitated this phenomenon. Ethosomes containing the highest amount of both, drug (10 mg/ml) and ethanol (20 % v/v), improved the drug deposition in the skin strata and in the receptor fluid up to 1.5-fold, relative to liposomes. Moreover this solid-like formulation can easily overcome drawbacks of traditional liquid liposome formulations which undergo a substantial loss at the application site.

Ophthalmic drug dosage forms: characterisation and research methods

This paper describes hitherto developed drug forms for topical ocular administration, that is, eye drops, ointments, in situ gels, inserts, multicompartment drug delivery systems, and ophthalmic drug forms with bioadhesive properties. Heretofore, many studies have demonstrated that new and more complex ophthalmic drug forms exhibit advantage over traditional ones and are able to increase the bioavailability of the active substance by, among others, reducing the susceptibility of drug forms to defense mechanisms of the human eye, extending contact time of drug with the cornea, increasing the penetration through the complex anatomical structure of the eye, and providing controlled release of drugs into the eye tissues, which allows reducing the drug application frequency. The rest of the paper describes recommended in vitro and in vivo studies to be performed for various ophthalmic drugs forms in order to assess whether the form is acceptable from the perspective of desired properties and patient's compliance.

Design and optimization of PLGA-based diclofenac loaded nanoparticles

Drug based nanoparticle (NP) formulations have gained considerable attention over the past decade for their use in various drug formulations. NPs have been shown to increase bioavailability, decrease side effects of highly toxic drugs, and prolong drug release. Nonsteroidal anti-inflammatory drugs such as diclofenac block cyclooxygenase expression and reduce prostaglandin synthesis, which can lead to several side effects such as gastrointestinal bleeding and renal insufficiency. The aim of this study was to formulate and characterize diclofenac entrapped poly(lactide-co-glycolide) (PLGA) based nanoparticles. Nanoparticles were formulated using an emulsion-diffusion-evaporation technique with varying concentrations of poly vinyl alcohol (PVA) (0.1, 0.25, 0.5, or 1%) or didodecyldimethylammonium bromide (DMAB) (0.1, 0.25, 0.5, 0.75, or 1%) stabilizers centrifuged at 8,800 rpm or 12,000 rpm. The resultant nanoparticles were evaluated based on particle size, zeta potential, and entrapment efficacy. DMAB formulated NPs showed the lowest particle size (108±2.1 nm) and highest zeta potential (−27.71±0.6 mV) at 0.1 and 0.25% respectively, after centrifugation at 12,000 rpm. Results of the PVA based NP formulation showed the smallest particle size (92.4±7.6 nm) and highest zeta potential (−11.14±0.5 mV) at 0.25% and 1% w/v, respectively, after centrifugation at 12,000 rpm. Drug entrapment reached 77.3±3.5% and 80.2±1.2% efficiency with DMAB and PVA formulations, respectively. The results of our study indicate the use of DMAB for increased nanoparticle stability during formulation. Our study supports the effective utilization of PLGA based nanoparticle formulation for diclofenac.