On the challenges of detecting whole Staphylococcus aureus cells with biosensors

Detection of Methicillin-Resistant Staphylococcus Aureus using vancomycin conjugated silica-based fluorescent nanoprobe

Methicillin-Resistant Staphylococcus Aureus (MRSA) is a worldwide major pathogenic bacteria that has emerged over the past three decades as the leading cause of nosocomial and community-acquired infections. Biosensors can provide rapid, sensitive, and selective detection of the presence and number of bacteria in various environments. Herein, a novel fluorescence nanoprobe was designed as a biosensor for MRSA detection using dye-incorporated silica nanoparticles (FSiNP). Based on the results of specific surface area analysis using the Brauner Emmett-Teller (BET) method, the surface area of the nanoparticles was obtained at 377.127 m2/g, and the X-ray diffraction (XRD) analysis confirmed that it was in the amorphous phase. Vancomycin, as the bioreceptor, was immobilized on the silica surface through a hydrosilylation reaction, generating the biosensing platform FSiNP-Van. Each modification step was corroborated by the Fourier Transform Infra-Red (FTIR) spectroscopy. The sensing principle was based on the fluorescence-quenching mechanism of FSiNP-Van at 515 nm obtaining a rapid response time of 20 min. The FSiNP-Van nanoprobe provided a wide linear concentration range of 10-106 CFU/mL with a limit of MRSA detection calculated at 1 CFU/mL. The fluorescent nanoprobe demonstrated here is expected to find applications in point-of-care (POC) diagnostics to detect the presence of MRSA bacteria.

Polymerization in living organisms

Vital biomacromolecules, such as RNA, DNA, polysaccharides and proteins, are synthesized inside cells via the polymerization of small biomolecules to support and multiply life. The study of polymerization reactions in living organisms is an emerging field in which the high diversity and efficiency of chemistry as well as the flexibility and ingeniousness of physiological environment are incisively and vividly embodied. Efforts have been made to design and develop in situ intra/extracellular polymerization reactions. Many important research areas, including cell surface engineering, biocompatible polymerization, cell behavior regulation, living cell imaging, targeted bacteriostasis and precise tumor therapy, have witnessed the elegant demeanour of polymerization reactions in living organisms. In this review, recent advances in polymerization in living organisms are summarized and presented according to different polymerization methods. The inspiration from biomacromolecule synthesis in nature highlights the feasibility and uniqueness of triggering living polymerization for cell-based biological applications. A series of examples of polymerization reactions in living organisms are discussed, along with their designs, mechanisms of action, and corresponding applications. The current challenges and prospects in this lifeful field are also proposed.

Technique Evolutions for Microorganism Detection in Complex Samples: A Review

Rapid detection of microorganisms is a major challenge in the medical and industrial sectors. In a pharmaceutical laboratory, contamination of medical products may lead to severe health risks for patients, such as sepsis. In the specific case of advanced therapy medicinal products, contamination must be detected as early as possible to avoid late production stop and unnecessary costs. Unfortunately, the conventional methods used to detect microorganisms are based on time-consuming and labor-intensive approaches. Therefore, it is important to find new tools to detect microorganisms in a shorter time frame. This review sums up the current methods and represents the evolution in techniques for microorganism detection. First, there is a focus on promising ligands, such as aptamers and antimicrobial peptides, cheaper to produce and with a broader spectrum of detection. Then, we describe methods achieving low limits of detection, thanks to Raman spectroscopy or precise handling of samples through microfluids devices. The last part is dedicated to techniques in real-time, such as surface plasmon resonance, preventing the risk of contamination. Detection of pathogens in complex biological fluids remains a scientific challenge, and this review points toward important areas for future research.

ROS Turn Nanoparticle Fluorescence on for Imaging Staphylococcus aureus Infection In Vivo

Direct, noninvasive, and real-time imaging of Staphylococcus aureus (S. aureus) infection is of great value for quick diagnosis of related disease in clinic, but remains challenging. Herein, employing a rationally designed near-infrared fluorescence probe Cys(StB u)-EDA-Thioketal-Lys(Cy5.5)-CBT (TK-CBT) and a CBT-Cys click reaction, the fluorescence-quenched nanoparticles TK-CBT-NPs are facilely prepared. Upon oxidation by the abundant reactive oxygen species in S. aureus-infected macrophages, TK-CBT-NPs are fractured, turning the fluorescence "on" for imaging infections in vitro and in vivo. Specifically, TK-CBT-NPs show a 6.1-fold fluorescence imaging signal enhancement of the macrophages that are infected by S. aureus for 20 h in vitro. At 4 h postinjection, TK-CBT-NPs show a 2.8-fold fluorescence imaging signal enhancement of the sites in mice that are infected by S. aureus for 24 h. It is anticipated that TK-CBT-NPs could be applied for diagnosis of S. aureus infections in clinic in the near future.

A Lateral Flow Test for Staphylococcus aureus in Nasal Mucus Using a New DNAzyme as the Recognition Element

Detection of pathogenic bacteria in complex biological matrices remains a major challenge. Herein, we report the selection and optimization of a new DNAzyme for Staphylococcus aureus (SA) and the use of the DNAzyme to develop a simple lateral flow device (LFD) for detection of SA in nasal mucus. The DNAzyme was generated by in vitro selection using a crude extra/intracellular mixture derived from SA, which could be used directly for simple solution or paper-based fluorescence assays for SA. The DNAzyme was further modified to produce a DNA cleavage fragment that acted as a bridging element to bind DNA-modified gold nanoparticles to the test line of a LFD, producing a simple colorimetric dipstick test. The LFD was evaluated with nasal mucus samples spiked with SA, and demonstrated that SA detection was possible in minutes with minimal sample processing.

Dynamic changes of inflammatory response and oxidative stress induced by methicillin-resistant Staphylococcus aureus in mice

This study is to analyze the dynamic changes of inflammation and oxidative stress in mice infected with MRSA and to provide experimental basis for clinically formulating reasonable treatment plans. We established a model of MRSA infection in mice, detected the fluctuations in the concentration of proinflammatory cytokines and oxidative stress factors with time, and combined with the results of microscopic examination of tissue sections to explain the infection in vivo caused by MRSA. The results showed that on the 1st, 3rd, and 7th day of MRSA infection, the number of leukocytes and eosinophils decreased at first and then increased, monocytes increased continuously, and neutrophils and basophils decreased. At the same time, the levels of proinflammatory cytokines IL-1β, IL-6, and TNF-α increased. The concentration of glutathione peroxide decreased, and the oxidative metabolites increased. Tissue sections also showed that inflammation and oxidative stress occurred in mice. It is obvious that MRSA infection can lead to significant inflammation and oxidative stress. Therefore, while treating MRSA infection, attention should be paid to the levels of inflammation and oxidative stress in different periods to achieve better treatment effects.

Biomimetic Sensors to Detect Bioanalytes in Real-Life Samples Using Molecularly Imprinted Polymers: A Review

Molecularly imprinted polymers (MIPs) come with the promise to be highly versatile, useful artificial receptors for sensing a wide variety of analytes. Despite a very large body of literature on imprinting, the number of papers addressing real-life biological samples and analytes is somewhat limited. Furthermore, the topic of MIP-based sensor design is still, rather, in the research stage and lacks wide-spread commercialization. This review summarizes recent advances of MIP-based sensors targeting biological species. It covers systems that are potentially interesting in medical applications/diagnostics, in detecting illicit substances, environmental analysis, and in the quality control of food. The main emphasis is placed on work that demonstrates application in real-life matrices, including those that are diluted in a reasonable manner. Hence, it does not restrict itself to the transducer type, but focusses on both materials and analytical tasks.

Faster Detection of Staphylococcus aureus in Milk and Milk Powder by Flow Cytometry

A flow cytometry (FCM)-based method was developed for the faster detection of Staphylococcus aureus in milk and milk powder. Viable S. aureus cells were recognized by highly selective, fluorescently labeled antibodies and Propidium Iodide, and then analyzed by FCM. Using a 5-h pre-enrichment period, the method could detect low numbers of S. aureus cells in 6 h, with a limit of detection of 7.50 cells/mL in milk and 8.30 cells/g in milk powder. The established method was compared with the plate-based method using 75 ultra-high-temperature-treated milk samples, 25 pasteurized milk samples, 66 raw milk samples, and 123 milk powder samples. The two methods yielded similar results for the detection of the pathogen in all sample types. The FCM-based method allows effective and faster monitoring of S. aureus contamination and can be applied to the rapid detection of microorganisms in milk and dairy products.

Dark Field Microscopy-Based Biosensors for the Detection of E. coli in Environmental Water Samples

Development of sensitive methods for the determination of E. coli bacteria contamination in water distribution systems is of paramount importance to ensure the microbial safety of drinking water. This work presents a new sensing platform enabling the fast detection of bacteria in field samples by using specific antibodies as the biorecognition element and dark field microscopy as the detection technique. The development of the sensing platform was performed using non-pathogenic bacteria, with the E. coli DH5α strain as the target, and Bacillus sp. 9727 as the negative control. The identification of the captured bacteria was made by analyzing the dark field microscopy images and screening the detected objects by using object circularity and size parameters. Specificity tests revealed the low unspecific attachment of either E. coli over human serum albumin antibodies (negative control for antibody specificity) and of Bacillus sp. over E. coli antibodies. The system performance was tested using field samples, collected from a wastewater treatment plant, and compared with two quantification techniques (i.e., Colilert-18 test and quantitative polymerase chain reaction (qPCR)). The results showed comparable quantification capability. Nevertheless, the present method has the advantage of being faster, is easily adaptable to in-field analysis, and can potentially be extended to the detection of other bacterial strains.

Nanomaterial-based optical and electrochemical techniques for detection of methicillin-resistant Staphylococcus aureus: a review

Methicillin-resistant Staphylococcus aureus (MRSA) is responsible for a number of life-threatening complications in humans. Mutations in the genetic sequence of S. aureus due to the presence of certain genes results in resistance against β-lactamases. Thus, there is an urgent need for developing highly sensitive techniques for the early detection of MRSA to counter the rise in resistant strains. This review (142 refs.) extensively covers literature reports on nanomaterial-based optical and electrochemical sensors from the year 1983 to date, with particularly emphasis on recent advances in electrochemical sensing (such as voltammetry and impedimetric) and optical sensing (such as colorimetry and fluorometry) techniques. Among the electrochemical methods, various nanomaterials were employed for the modification of electrodes. Whereas, in optical assays, formats such as enzyme linked immunosorbent assay, lateral flow assays or in optical fiber systems are common. In addition, novel sensing platforms are reported by applying advanced nanomaterials which include gold nanoparticles, nanotitania, graphene, graphene-oxide, cadmium telluride and related quantum dots, nanocomposites, upconversion nanoparticles and bacteriophages. Finally, closing remarks and an outlook conclude the review. Graphical abstract Schematic of the diversity of nanomaterial-based methods for detection of methicillin-resistant Staphylococcus aureus (MRSA). AuNPs: gold nanoparticles; QDs: quantum dots; PVL: Panton-Valentine leukocidin; mecA gene: mec-gene complex encoding methicillin resistance.