Biodegradation of Polystyrene by Three Bacterial Strains Isolated from the Gut of Superworms (Zophobas atratus larvae)

Integrating genomics, molecular docking, and protein expression to explore new perspectives on polystyrene biodegradation

Faced with the escalating challenge of global plastic pollution, this study specifically addresses the research gap in the biodegradation of polystyrene (PS). A PS-degrading bacterial strain was isolated from the gut of Tenebrio molitor, and genomics, molecular docking, and proteomics were employed to thoroughly investigate the biodegradation mechanisms of Pseudomonas putida H-01 against PS. Using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (ATR-FTIR), and contact angle analysis, significant morphological and structural changes in the PS films under the influence of the H-01 strain were observed. The study revealed several potential degradation genes and ten enzymes that were specifically upregulated in the PS degradation environment. Additionally, a novel protein with laccase-like activity, LacQ1, was purified from this strain for the first time, and its crucial role in the PS degradation process was confirmed. Through molecular docking and molecular dynamics (MD) simulations, the interactions between the enzymes and PS were detailed, elucidating the binding and catalytic mechanisms of the degradative enzymes with the substrate. These findings have deepened our understanding of PS degradation.

New insights on the degradation of polystyrene and polypropylene by larvae of the superworm Zophobas atratus and gut bacterial consortium enrichments obtained under different culture conditions

This study aims to deepen knowledge of the biodegradation of plastics, focusing on polypropylene (PP) fabric from surgical masks and polystyrene (PS) by larvae of Zophobas atratus as well as of specialized bacterial consortia from their gut, which were obtained in different enrichment conditions (aerobic, anaerobic, presence or absence of combined nitrogen). Plastics ingested by larvae obtained in Spain did not show any signs of oxidation but only limited depolymerization, preferably from the lowest molecular weight chains. Gut microbiota composition changed as an effect of plastic feeding. Such differences were more evident in bacterial enrichment cultures, where the polymer type influenced the composition more than by culture conditions, with an increase in the presence of nitrogen-fixers in anaerobic conditions. PS and PP degradation by different enrichment cultures was confirmed under aerobic and anaerobic conditions by respirometry tests, with anaerobic conditions favouring a more active plastic degradation. In addition, exposure to selected bacterial consortia in aerobiosis induced limited surface oxidation of PS. This possibly indicates that different biochemical routes are being utilized in the anaerobic gut and in aerobic conditions to degrade the polymer.

Corrigendum: Plastic biodegradation by in vitro environmental microorganisms and in vivo gut microorganisms of insects

[This corrects the article DOI: 10.3389/fmicb.2022.1001750.].

Progress in polystyrene biodegradation by insect gut microbiota

Polystyrene (PS) is frequently used in the plastics industry. However, its structural stability and difficulty to break down lead to an abundance of plastic waste in the environment, resulting in micro-nano plastics (MNPs). As MNPs are severe hazards to both human and environmental health, it is crucial to develop innovative treatment technologies to degrade plastic waste. The biodegradation of plastics by insect gut microorganisms has gained attention as it is environmentally friendly, efficient, and safe. However, our knowledge of the biodegradation of PS is still limited. This review summarizes recent research advances on PS biodegradation by gut microorganisms/enzymes from insect larvae of different species, and schematic pathways of the degradation process are discussed in depth. Additionally, the prospect of using modern biotechnology, such as genetic engineering and systems biology, to identify novel PS-degrading microbes/functional genes/enzymes and to realize new strategies for PS biodegradation is highlighted. Challenges and limitations faced by the application of genetically engineered microorganisms (GEMs) and multiomics technologies in the field of plastic pollution bioremediation are also discussed. This review encourages the further exploration of the biodegradation of PS by insect gut microbes/enzymes, offering a cutting-edge perspective to identify PS biodegradation pathways and create effective biodegradation strategies.

Degradation and potential metabolism pathway of polystyrene by bacteria from landfill site

Microplastics pollution has garnered significant attention in recent years. The unique cross-linked structure of polystyrene microplastics makes them difficult to biodegrade. In this study, we investigated the microbial community in landfill soil that has the ability to degrade polystyrene, as well as two isolated strains, named Lysinibacillus sp. PS-L and Pseudomonas sp. PS-P. The maximum weight loss of polystyrene film and microplastic in 30 days is 2.25% and 6.99% respectively. The water contact angle of polystyrene film decreased by a maximum of 35.70% during biodegradation. The increase in hydrophilicity is attributed to the oxidation reaction and formation of hydroxyl groups during the degradation of polystyrene. The carbon and oxygen element contents of polystyrene decreased and increased by a maximum of 3.81% and 0.79% respectively. The peak intensity changes at wavelengths of 3285-3648 cm-1 and 1652 cm-1 in Fourier transform infrared spectroscopy confirmed the formation of hydroxyl and carbonyl groups. Furthermore, quantitative PCR revealed the gene expression levels of alkane monooxygenase and alcohol dehydrogenase were upregulated by 8.8-fold and 8.5-fold respectively in PS biodegradation. Additionally, genome annotation of Pseudomonas sp. PS-P identified nine genes associated with polystyrene metabolism. These findings highlight Pseudomonas sp. PS-P as a potential candidate strain for polystyrene degradation enzymes or genes. Thus, they lay the groundwork for understanding the potential metabolic mechanisms and pathways involved in polystyrene degradation.

Establishment of plastic-associated microbial community from superworm gut microbiome

Gut microbial communities of plastic-munching worms provide novel insights for the development of plastic-processing biotechnologies. Considering the complexity of worm maintenance and the gut microbial communities, it is challenging to apply the worms directly in plastic processing. Harnessing the power of microbial communities derived from the worm gut microbiomes in vitro may enable a promising bioprocess for plastic degradation. Here, we established stable and reproducible plastic-associated biofilm communities derived from the gut microbiome of a superworm, Zophobas atratus, through a two-stage enrichment process: feeding with plastics (HDPE, PP, and PS) and in vitro incubation of gut microbiomes obtained from the plastic-fed worms. Plastic feeding exhibited marginal influence on bacterial diversity but substantially changed the relative abundance of different bacterial groups, and intriguingly, enriched potential plastic degraders. More prominent shifts of microbial communities were observed during the in vitro incubation of the gut microbiomes. Taxa containing plastic-degrading strains were further enriched, while other taxa represented by lactic acid bacteria were depleted. Additionally, the plastic characterization confirmed the degradation of the incubated plastics by the plastic-associated microbial communities. Community functional inference for both gene abundance and community phenotype suggested that the in vitro incubation enhanced plastic-degrading potential. Deterministic ecological effects, in particular, selection processes, were identified as the main driving force of the observed community shifts. Our findings provide novel insights into plastic-munching-worm-inspired bioprocessing of plastic wastes.

Ingestion and biodegradation of disposable surgical masks by yellow mealworms Tenebrio molitor larvae: Differences in mask layers and effects on the larval gut microbiome

During the COVID-19 pandemic, the usage and production of face masks considerably increased, resulting in large quantities of mask waste accumulating in the natural environment. To investigate whether masks of polypropylene (PP) material could be ingested and degraded by insect worms like PP foam plastic, yellow mealworms were provided with different layers of disposable surgical masks as sole diets for 30 d. Although mask layers, especially the middle layer of melt-blown filter, could be ingested by yellow mealworms, sole mask layer diets had adverse effects on the larval survival and growth. Analyses of Fourier transform infrared spectroscopy, differential scanning calorimeter and thermogravimetric, and gel permeation chromatography demonstrated the changes of functional groups, thermostability and molecular weights in frass compared to original masks, indicating the partial oxidation and degradation of masks. And the depolymerization of the middle layer of masks by yellow mealworms was different from that of other layers. The larval gut bacterial and fungal microbiomes were assessed by Illumina MiSeq, indicating that both of them shifted upon sole layer mask diets. Changes in relative abundances of dominant bacterial and fungal genera demonstrated the strong association between gut microbiome and mask degradation. For instance, unclassified Enterobacteriaceae was closely associated with outer layers degradation. Lactococcus and unclassified Ascomycota were responsible for middle layers degradation, while Lactococcus and Morganella for inner layers degradation. In conclusion, disposable surgical masks of PP material could be ingested and biodegraded by yellow mealworms. The diversities of gut bacterial and fungal microbiomes were associated with the differences in rigid crystalline structures of the layer masks.

Biodegradation of polystyrene microplastics by superworms (larve of Zophobas atratus): Gut microbiota transition, and putative metabolic ways

Superworm (larve of Zophobas atratus) could consume foams of expanded polystyrene plastics. However, there is no sufficient understanding of the impact of microplastics on superworms and the degradation pathways of polystyrene. Herein, we explored the weight and survival change of superworms while fed with polystyrene microplastics, and found that survival rate and mean weight would reduce. In terms of gut microbial community structure of surperworms, significant shifts were detected with the relative abundance of Hafnia-Obesumbacterium sp. increasing. In addition, we domesticated two microbiota from the gut of superworms, and confirmed their ability to degrade PS in vitro. The last but most important, 1291 metabolites were identified by HPLC-TOF-MS/MS, and six metabolites related to polystyrene degradation were identified through comparative metabolomic analysis. According to the content and pathways of these metabolites, three metabolic pathways of polystyrene were (a) styrene-phenylacetyl-CoA-L-2-aminoadipic acid; (b) styrene-phenylacetyl-CoA-benzaldehyde; (c) styrene-2-hydroxyacetophenone. These results would help to further screen bacteria of PS degradation and investigate PS metabolic pathways in invertebrates.

A novel bacterial combination for efficient degradation of polystyrene microplastics

This study aimed to investigate the combined decomposition of polystyrene (PS) microplastics using three bacterial cultures: Stenotrophomonas maltophilia, Bacillus velezensis, and Acinetobacter radioresistens. The ability of all three strains to grow on medium containing PS (Mn 90,000 Da, Mw 241,200 Da) microplastics as the sole carbon source was examined. After 60 days of A. radioresistens treatment, the maximum weight loss of the PS microplastics was found to be 16.7 ± 0.6% (half-life 251.1 d). After 60 days of treatment with S. maltophilia and B. velezensis, the maximum weight loss of PS microplastics was 43.5 ± 0.8% (half-life 74.9 d). After 60 days of treatment with S. maltophilia, B. velezensis, and A. radioresistens, the weight loss of the PS microplastics was 17.0 ± 0.2% (half-life 224.2 d). The S. maltophilia and B. velezensis treatment showed a more significant degradation effect after 60 days. This result was attributed to interspecific assistance and interspecific competition. Biodegradation of PS microplastics was confirmed using scanning electron microscopy, water contact angle, high-temperature gel chromatography, Fourier transform infrared spectroscopy and thermogravimetric analysis. This study is the first to explore the degradation ability of different bacterial combinations on PS microplastics, providing a reference for future research on the biodegradation technology of mixed bacteria.

Microplastics occurrence, detection and removal with emphasis on insect larvae gut microbiota

Microplastics have been identified in all living forms including human beings, the present need is to restrain its spread and devise measures to remediate microplastics from polluted ecosystems. In this regard, the present review emphasizes on the occurrence, sources detection and toxic effects of microplastics in various ecosystems. The removal of microplastics is prevalent by various physico-chemical and biological methods, although the removal efficiency by biological methods is low. It has been noted that the degradation of plastics by insect gut larvae is a well-known aspect, however, the underlying mechanism has not been completely identified. Studies conducted have shown the magnificent contribution of gut microbiota, which have been isolated and exploited for microplastic remediation. This review also focuses on this avenue, as it highlights the contribution of insect gut microbiota in microplastic degradation along with challenges faced and future prospects in this area.

Plastic biodegradation by in vitro environmental microorganisms and in vivo gut microorganisms of insects

Traditional plastics, such as polyethylene (PE), polystyrene (PS), polypropylene (PP), polyvinyl chloride (PVC), polyethylene terephthalate (PET), polyurethane (PUR), and other plastic polymers, are difficult to degrade and are gradually accumulated in the environment to cause a serious environmental problem, which is urgently needed to develop novel treatments or control technology. The biodegradation of plastics has gained great attention due to the advantages of green and safe characteristics. Microorganisms play a vital role in the biodegradation of plastics, including environmental microbes (in vitro) and gut microbes of insects (in vivo). Microbial degradation in environmental conditions in vitro is extremely slow for major plastics at degradation rates on the basis of a month or even a year time, but recent discoveries show that the fast biodegradation of specific plastics, such as PS, PE, and PUR, in some invertebrates, especially insects, could be enhanced at rates on basis of hours; the biodegradation in insects is likely to be gut microbial-dependent or synergetic bioreactions in animal digestive systems. This review comprehensively summarizes the latest 7-year (2016-2022) publications on plastic biodegradation by insects and microorganisms, elucidates the mechanism of plastic degradation in insects and environmental microbes, and highlights the cutting-edge perspectives for the potential applications of plastic biodegradation.

Biodegradation of polyethylene by Meyerozyma guilliermondii and Serratia marcescens isolated from the gut of waxworms (larvae of Plodia interpunctella)

The widespread use of polyethylene (PE) causes a large amount of indigestible plastic waste. Waxworms (the larvae of Plodia interpunctella) can eat PE, but the degradation principle of PE under the action of intestinal microorganisms is still unclear, especially the insufficient research on key degradable PE strains. In this study, we fed waxworms with PE. Two strains with high PE degradation efficiency were isolated and purified, and the effects of single and microbial consortia on PE degradation were evaluated by water contact angle (WCA), FTIR, GC-MS, SEM and RT-qPCR. The results showed that Meyerozyma guilliermondii ZJC1 (MgZJC1) and Serratia marcescens ZJC2 (SmZJC2) could degrade PE. However, the degradation efficiency of the microbial consortium was higher, and the weight loss rate of PE was 15.87 %. In addition, the PE degradation products of MgZJC1 were C₉H₁₀O, C₂₀H₁₅NO, C₂₈H₄₄O₃ and C₁₆H₃₂O₂, and the PE degradation products of SmZJC2 were C₁₆H₁₈O, C₁₄H₁₈N₂O₇ and C₃₁H₄₈O₆. The PE degradation products of the microbial consortium were C₁₁H₂₄, C₁₉H₁₀O, C₁₅H₃₂, C₁₄H₃₀, C₁₆H₃₄, C₂₅H₅₂ and C₂₇H₅₆. RT-qPCR results showed that SmZJC2 promoted PE degradation by upregulating the expression of multiple genes, such as multicopper oxidase genes (PiSm-CueO). MgZJC1 responded to carbon deficiency by upregulating the expression of multiple genes, such as key enzyme genes in the tricarboxylic acid (TCA) cycle. This study can be used to develop an efficient microbial consortium for PE degradation and provide a basis for the reuse of PE waste. It can also provide a research basis for the joint degradation of PE by microbial consortia composed of bacteria and fungi.

Upcycling Polystyrene

Several environmental and techno-economic assessments highlighted the advantage of placing polystyrene-based materials in a circular loop, from production to waste generation to product refabrication, either following the mechanical or thermochemical routes. This review provides an assortment of promising approaches to solving the dilemma of polystyrene waste. With a focus on upcycling technologies available in the last five years, the review first gives an overview of polystyrene, its chemistry, types, forms, and varied applications. This work presents all the stages that involve polystyrene's cycle of life and the properties that make this product, in mixtures with other polymers, command a demand on the market. The features and mechanical performance of the studied materials with their associated images give an idea of the influence of recycling on the structure. Notably, technological assessments of elucidated approaches are also provided. No single approach can be mentioned as effective per se; hybrid technologies appear to possess the highest potential. Finally, this review correlates the amenability of these polystyrene upcycling methodologies to frontier technologies relating to 3D printing, human space habitation, flow chemistry, vertical farming, and green hydrogen, which may be less intuitive to many.