Hydrogen peroxide bleaching induces changes in the physical properties of dental restorative materials: Effects of study protocols

Effects of home bleaching agents on hybrid ceramics: mechanical properties and color change

BACKGROUND

Home bleaching is a promising option for addressing discolored teeth conservatively. However, its impact on the physical and mechanical properties of indirect restorations remains unknown. This study provides comparative insights into the material responses to aesthetic treatments by assessing the effects of home bleaching agents on two hybrid ceramics: VITA ENAMIC® and Grandio Blocs. The focus is on evaluating color stability and biaxial flexural strength.

METHODS

60 discs (12 × 1 mm) were prepared from hybrid ceramics. Specimens were divided into two groups according to type of hybrid ceramic (30 specimens in each group); group A: VITA ENAMIC®, group B: Grandio Blocs. Each group was further subdivided into 3 subgroups according to the concentration of home bleaching agents used (10 specimens in each subgroup); subgroup C: unbleached control group, subgroup C10%: carbamide peroxide 10% bleaching agent, and subgroup C35%: carbamide peroxide 35% bleaching agent. Samples of subgroup C10% were bleached with Home Bleaching Opalescence PF (10%) for 8 h per day for 14 days, as directed by the manufacturer. Samples of subgroup C35% were bleached using WHITEsmile Carbamide Peroxide (35%), following the manufacturer's directions for 30 min every day for 14 days. Color change (ΔE) was assessed using of the CIE L*a*b* system. Then, the biaxial flexural strength test was done. The data were analyzed using two-way ANOVA tests and Weibull analysis.

RESULTS

VITA ENAMIC samples exhibited significantly higher color change than Grandio Blocs (p < 0.001), while Grandio Blocs showed significantly higher biaxial flexural strength (p < 0.001). The concentration of the bleaching agent had no significant effect on color change (p = 0.086). However, regardless of its concentration, bleaching significantly reduced biaxial flexural strength in both materials (p < 0.001). Weibull analysis showed that Grandio Blocs had higher characteristic strength, while VITA ENAMIC demonstrated more reliable failure behavior.

CONCLUSIONS

Compared to Grandio Blocs, VITA ENAMIC® exhibited a greater color change with both 10% and 35% carbamide peroxide home bleaching agents. Additionally, both concentrations of carbamide peroxide reduced the biaxial flexural strength of hybrid ceramics. These findings can guide clinicians in selecting hybrid ceramics based on clinical demands for aesthetics and durability. VITA ENAMIC® offers greater structural reliability and predictability for aesthetic restorations, while Grandio Blocs provide superior durability and stress resistance for high-stress clinical applications.

Effect of at-home and in-office bleaching on microleakage of class V composite resin restorations using different types of universal adhesives: An in vitro study

Background

When bleaching agents contact dental structures, they act on restorative materials and adhesive interfaces. This study investigated the effect of "at-home" and "in-office" bleaching on the microleakage of composite resin restorations performed with different universal adhesives in self-etch and etch-and-rinse modes.

Methods

Class V cavities were prepared in 132 premolars. The samples were divided into four groups (n=33). All Bond Universal adhesive was used in the first and second groups, and G-Premio Bond adhesive was used in the third and fourth groups. The total-etch mode was used in the first and third groups, and the self-etch mode was used in the second and fourth groups. The samples were divided into three subgroups (n=11). In the first subgroup, home bleaching was used, and in the second subgroup, office bleaching was used. In the third subgroup, bleaching was not performed. The specimens were examined under a stereomicroscope for microleakage. Ordinal regression analysis was applied (P<0.05).

Results

The adhesive type, application method, and margin type significantly affected microleakage (P<0.05). The amount of microleakage in All Bond Universal adhesive was significantly higher than in G-Premio Bond adhesive. The chance of microleakage in the self-etch mode was almost twice as high as in the etch-and-rinse mode. The bleaching method did not significantly affect microleakage (P>0.05).

Conclusion

Based on the results of the microleakage test, bleaching after composite resin restorations did not significantly affect the microleakage of Class V restorations.

The effect of tooth bleaching using violet LED (405-410 nm) on the properties of resin-based composites

BACKGROUND

The objective of this study was to evaluate the effect of bleaching techniques, including or not the use of violet light (405-410 nm), on resin-based composites' color, surface roughness, nanohardness, and elastic modulus.

METHODS

Ninety-six disk-shaped specimens (12 mm x 2 mm; n = 12) were prepared using Filtek Z350 XT (Z350) and IPS Empress Direct (ED) resin-based composites. After 24 h, specimens were stained in red wine for 28 days. After staining, specimens were divided into four experimental groups: 40 % Hydrogen Peroxide (HP); Violet Light (VL); 40 % Hydrogen Peroxide associated with Violet Light (HP+VL), and a control group - no treatment (NT). Specimens were evaluated at six experimental times: initial (24 h after light curing); after staining and after the 1st, 2nd, 3rd, and 4th bleaching sessions regarding the color change (ΔE00, L*, a*, b*, and WID); roughness (Ra), nanohardness and elastic modulus (GPa). Two-way analysis of variance for repeated measures was performed (α=0.05 %).

RESULTS

There was a statistically significant difference between staining and the 1st bleaching session for all ED groups (p<0.05). After the last bleaching session, there were no differences between the experimental and the control groups of both resin-based composites. Bleaching using violet light did not change the roughness, nanohardness and elastic modulus of the tested resin-based composites (p>0.05).

CONCLUSIONS

Although hydrogen peroxide and violet light remove pigments from resin-based composites without affecting their surface roughness, nanohardness, and elastic modulus, the color change was similar to the one obtained by immersion in distilled water.

The effect of in-office bleaching agents on the Vickers hardness and surface topography of polished and unpolished CAD/CAM composite materials

In-office bleaching, using hydrogen peroxide, is effective to remove dental enamel stains. However, bleaching agents can deteriorate surface properties of CAD-CAM materials. This in vitro study aimed to investigate the effect of in-office bleaching agents on Vickers hardness and surface topography of polished and unpolished dental CAD-CAM composite materials (Grandio blocs, Lava Ultimate, BRILLIANT Crios, Cerasmart), and a polymer-infiltrated ceramic network block (Vita Enamic). The specimens were randomly divided into two groups: unpolished or polished. The micro-hardness and surface topography of each group were measured before bleaching, after a 60 min bleaching period, and 24-h and one-month post-bleaching. In-office bleaching significantly influenced the Vickers hardness of both the polished and unpolished CAD/CAM composite blocks, with Vita Enamic exhibiting the least hardness stability among all groups. Furthermore, in-office bleaching significantly influenced the surface roughness of unpolished CAD/CAM composite blocks. There was a significant difference in hardness reduction between the polished and unpolished specimens for most of the investigated materials at different time points. The bleaching did not influence the surface roughness of the investigated polished group, except for Vita Enamic and Lava Ultimate. However, it did influence the surface roughness of the investigated materials in the unpolished group.

The impact of the diode laser 940 nm photoactivated bleaching on color change of different composite resin restorations

The study's main objective was to evaluate as well as compare the impact of diode laser 940 nm and conventional in-office bleaching technique on the color change of different composite resin restorations. A total of ninety composite resin discs (CRDs) were made from Filtek™ Bulk Fill, nanohybrid composite resin Filtek™ Z550 XT Universal Restorative, and flowable composite resin restoration Filtek™ Z350xt Flowable Composite. Group A: (30) CRD for Filtek™ Bulk Fill, group B: (30) CRD for Filtek™ Z550 XT Universal Restorative, and group C: (30) CRD for Filtek™ Z350xt Flowable Composite. A1, B1, and C1: (10 CRD in each group): Control group without bleaching. A2, B2, and C2: 10 CRD in each group bleached with Laser White20 without laser activation. A3, B3, and C3: 10 CRD in each group bleached with Laser White20 and activated by diode laser 940 nm. The color was evaluated using a dental spectrophotometer. One-way ANOVA was utilized for the comparison of the color stability of the CRD. P < 0.05 is regarded as statically significant. Both conventional and diode laser in-office vital tooth bleaching protocols affected the color stability of composite resin restorations. The result demonstrated that bleaching without laser activation produced color change (mean [8.30], standard deviation [SD] (1.95) P [< 0.001]), whereas the bleaching and activation by diode laser produced color change (mean [8.11], SD [1.99], P [< 0.001]). Both types of bleaching protocol affected composite resin restorations' color stability. In all tested materials, color changes after the bleaching protocol were clinically perceptible. The restorations following the bleaching procedure are required to be replaced by clinicians.

In vitro effectiveness of different dental bleaching protocols using violet LED

PURPOSE

There has been growing demand for dental bleaching worldwide, however, despite being effective, hydrogen peroxide (HP) can negatively affect the dental structure. Thus, new techniques, such as violet LED light have emerged and need to be studied. The aim of this study was to analyze and compare the effectiveness of violet LED light alone or combined with 35% HP gel.

METHODS

Six different tooth bleaching techniques (n = 10) were performed in intrinsically pigmented bovine teeth: G1 - 35% HP (1x/week for 4 weeks, 45 min of gel application); G2 - 35% HP (1x/week for 4 weeks, 15 min of gel application); G3 - violet LED (1x/week for 4 weeks); G4 - violet LED (2x/week for 2 weeks); G5 - violet LED (4x/week for 1 week); G6 - Violet LED + 35% HP (hybrid technique, 1x/week for 4 weeks, 15 min of gel application). Specimens were submitted to color evaluation at predetermined times using Konica Minolta® spectrophotometer, and the surface morphology (n = 3) was qualitatively analyzed by Scanning Electron Microscope (SEM). Data of the color change test were analyzed considering a 5% level of significance.

RESULTS

There was significant difference in color (p <0.05) for all groups after bleaching protocols. SEM analysis revealed that the greatest change in surface occurred in Group G1, with demineralization of the dental enamel. When considering the same time interval, there were no statistical differences for axis L*, but differences were shown for axis a* (G2, G3, G4 ≥ G1, G5 ≥ G6) and b* (G1, G2, G3, G4, G5 > G6). Regarding the comparison of ΔE00 between groups, results showed statistical difference between groups, with G1 ≥ G2, G5, G6 ≥ G3, G4.

CONCLUSION

Bleaching protocols with less time (15 min) or no exposure to 35% HP (violet LED, 4x/week) could promote bleaching results as those obtained by the conventional technique using 35% HP for 45 min, with no enamel surface changes, showing to be a promising alternative to tooth bleaching.

Damping Behaviour and Mechanical Properties of Restorative Materials for Primary Teeth

The energy dissipation capacity and damping ability of restorative materials used to restore deciduous teeth were assessed compared to common mechanical properties. Mechanical properties (flexural strength, modulus of elasticity, modulus of toughness) for Compoglass F, Dyract eXtra, SDR flow, Tetric Evo Ceram, Tetric Evo Ceram Bulk Fill, and Venus Diamond were determined using a 4-point bending test. Vickers hardness and Martens hardness, together with its plastic index (η_ITdis), were recorded using instrumented indentation testing. Leeb hardness (HLD) and its deduced energy dissipation data (HLD_dis) were likewise determined. The reliability of materials was assessed using Weibull analysis. For common mechanical properties, Venus Diamond always exhibited the significantly highest results and SDR flow the lowest, except for flexural strength. Independently determined damping parameters (modulus of toughness, HLD_dis, η_ITdis) invariably disclosed the highest values for SDR flow. Composite materials, including SDR flow, showed markedly higher reliabilities (Weibull modulus) than Compoglass F and Dyract eXtra. SDR flow showed pronounced energy dissipation and damping characteristics, making it the most promising material for a biomimetic restoration of viscoelastic dentin structures in deciduous teeth. Future developments in composite technology should implement improved resin structures that facilitate damping effects in artificial restorative materials.

The Effect of Home and In-Office Bleaching on Microhardness and Color of Different CAD/CAM Ceramic Materials

The aim of this study is to assess the effect of different bleaching agents on microhardness and color of CAD/CAM ceramics including IPS e.max CAD (lithium disilicate), VITA ENAMIC (polymer-infiltrated ceramic), and Celtra Duo CAD (zirconia-reinforced lithium silicate). Materials' samples were divided into three groups (n = 10) and each received a different bleaching treatment; 20% carbamide peroxide, 35% carbamide peroxide, and 40% hydrogen peroxide. A fourth group was stored in water acting as a control. Vickers microhardness and spectrophotometric color measurements were taken at baseline and after bleaching. IPS e.max CAD showed a significant reduction (about 14%), while VITA ENAMIC showed a significant increase (about 78%) in microhardness after bleaching (p ˂ 0.001). Celtra Duo CAD did not demonstrate a significant change in microhardness (p ≥ 0.609). The color difference (ΔE_ab) after bleaching was 0.29 (±0.08), 2.84 (±0.64), and 1.99 (±0.37) for IPS e.max CAD, VITA ENAMIC, and Celtra Duo CAD, respectively. It could be concluded that the effect of bleaching on color and microhardness was mainly material-dependent. Bleaching significantly affected the microhardness of IPS e.max CAD and VITA ENAMIC. The color difference was within the clinically imperceptible range for IPS e.max CAD, while VITA ENAMIC and Celtra Duo CAD demonstrated perceptible color change.

Comparison of bleaching effects when applied to white-spot lesions before or after resin infiltration: An in vitro study

BACKGROUND

The purpose of this study was to compare color alterations (ΔE) of white-spot lesions (WSLs) bleached before versus after resin infiltration (RI).

METHODS

Using the facial surfaces of bovine maxillary incisors, WSLs were created and the teeth were allocated into 2 groups (n = 45/group): bleach then RI (B-RI group) and RI then bleach (RI-B group). To determine ΔE, Commission Internationale de l'Eclairage L∗ a∗ b∗ (L∗ represents lightness, ranging from black to white [0-100]; a∗ represents green to red chromaticity [-150-+100]; and b∗ represents blue to yellow chromaticity [-100-+150]) measurements were obtained at baseline, after WSL formation, and after RI and bleaching. Representative specimens were evaluated by means of scanning electron microscopy. Statistical analyses included the Mann-Whitney U and Wilcoxon signed rank tests (P ≤ .0016) and repeated measures analysis of variance (P ≤ .05).

RESULTS

No differences in ΔE were found comparing B-RI with RI-B groups or when the B-RI group was compared with bleached enamel. A statistically significant difference was found when the RI-B group was compared with bleached enamel (ΔE, 0.81; P < .001), but the difference was deemed not clinically significant. Scanning electron microscopy revealed that bleaching after RI increased surface roughness of the resin.

CONCLUSIONS

There were no clinically significant differences in ΔE of WSLs when bleach was applied before or after RI; however, applying bleaching agent after RI roughened the surface of the resin material.

PRACTICAL IMPLICATIONS

Results indicate that ΔE were not clinically significantly different between WSLs bleached before versus after RI, although it is best to sequence bleaching before RI therapy, as bleaching after RI roughened the restoration's surface.

Effects of tooth bleaching protocols assisted by Er,Cr:YSGG and diode (980 nm) lasers on color change of resin-based restoratives

OBJECTIVE

To evaluate color change of three resin-based restorative materials after two laser-assisted in-office tooth bleaching protocols using Er,Cr:YSGG and diode (980 nm) lasers.

MATERIALS AND METHODS

A nanohybrid composite resin (EP), a Bis-GMA free composite resin (EPBio) and a resin-matrix CAD-CAM ceramic (HC) were tested. Ninety specimens were prepared and stored in artificial saliva. Group 1 received an in-office bleaching treatment using 40% H₂ O_2. The same bleaching procedure was assisted by Er,Cr:YSGG laser in Group 2 and by a diode laser (980 nm) in Group 3. Color measurements were performed using a double-beam UV-Vis spectrophotometer at four time intervals (before, 24 h, 15 and 30 days), converted to L*, a*, and b* units of the CIELAB color space and assessed on the basis of 50:50% acceptability (ΔΕ_ab * = 2.7 and ΔΕ₀₀  = 1.77) and 50:50% perceptibility (ΔΕ_ab * = 1.2 and ΔΕ₀₀  = 0.81) thresholds. Three-way ANOVA with repeated measurements was used for statistical analysis of the data.

RESULTS

Color and whiteness changes did not exceed the established 50:50% acceptability thresholds. EP presented the highest color change after the bleaching followed by EPBio and HC (p ≤ 0.05). Three-way ANOVA revealed that type of material and time interval significantly affected color change (p ≤ 0.001).

CONCLUSIONS

The tested bleaching treatments assisted by Er,Cr:YSGG and diode (980 nm) lasers did not induce unacceptable color and whiteness changes in the resin-based restorative materials.

CLINICAL SIGNIFICANCE

The tested Er,Cr:YSGG and diode (980 nm) laser-assisted tooth bleaching protocols which may be recommended to accelerate the clinical procedures cannot affect the color of the existing resin-based restorations in case they are accidentally exposed on the bleaching gel and laser irradiation.

Color Stability and Staining Susceptibility of Direct Resin-Based Composites after Light-Activated In-Office Bleaching

This study evaluated color stability and staining susceptibility of five direct resin-based composites (RBCs) subjected to light-activated in-office bleaching with 40% hydrogen peroxide (HP). The test materials included 5 RBCs, which consisted of one nano-filled, one sub-micron, one bulk-filled, and two nano-hybrid RBC types. Ten disc-shaped specimens of each RBC were fabricated and divided into bleaching (BLE) and non-bleaching (CON) groups (n = 5 for each group). Specimens were then immersed in red wine solution over 4 h. A spectrophotometer was used to obtain Commission Internationale de l'Eclairage (CIE) L*a*b* parameters for each of the following periods tested: before bleaching (T_BA), after bleaching (T_BL), and after staining (T_ST). Color stability and staining susceptibility were evaluated using two metrics, CIEDE2000 color differences (ΔE₀₀) and whiteness variations using the whiteness index (ΔWI_D). Data were analyzed using repeated measures two-way analysis of variance (ANOVA) (α = 0.05). Statistically significant and clinically unaccepted ΔE₀₀ and ΔWI_D were observed for all tested specimens between T_BA and T_BL. The nano-hybrid type RBCs showed the highest discoloration among materials after bleaching treatment. The BLE group exhibited significantly higher ΔE₀₀ and ΔWI_D than the CON group for all the tested RBCs between T_BA and T_ST. The sub-micron type RBC showed the highest discoloration among materials after immersion in the red wine. Conclusion. The light-activated in-office bleaching with 40% HP's influences on color and whiteness index were material-dependent. The use of bleaching treatment also increased the susceptibility to red wine for all RBCs.

Evaluation of the colour and translucency parameter of conventional and Computer-aided design and computer-aided manufacturing (CAD-CAM) feldspathic porcelains after staining and laser-assisted bleaching

Aims:

The present study aimed to evaluate the color and translucency changes of the feldspathic porcelain samples made using the conventional or computer-aided design/computer-aided manufacturing (CAD/CAM) methods after immersion in staining solutions and laser bleaching.

Materials and Methods:

A total of 72 samples of feldspathic porcelain were fabricated using the conventional (n = 36) or CAD/CAM (n = 36) methods. Afterward, each group was randomly divided into three subgroups (n = 12), which underwent exposure to coffee, orange juice, or distilled water for 6 weeks. Then, the samples underwent diode laser-assisted bleaching. A spectrophotometer assessed the samples’ color and translucency preintervention, after staining, and after bleaching.

Statistical Analysis Used:

One-way and two-way analysis of variance and independent t-test were used. The significance level was 0.05.

Results:

Staining for 6 weeks significantly changed the color of both types of feldspathic porcelains. Furthermore, there were significant differences between the ceramics made using different methods and immersed in different staining solutions (P < 0.001). Furthermore, laser-assisted bleaching changed the color of immersed specimens significantly (P = 0.005). However, there were no significant translucency changes in all the subgroups after staining (P = 0.215) and laser bleaching (P = 0.325).

Conclusions:

The staining-induced discoloration of all the subgroups was in the clinically acceptable range (ΔΕ<3.3). In addition, bleaching could effectively remove the stains in both types of ceramics while not affecting the primary color. Moreover, the translucency of the ceramics was not affected by staining or laser-assisted bleaching.

Comparison of the effect of bleaching with 15% carbamide peroxide and 35% hydrogen peroxide on flexural strength of Cention N in selfcured and dual-cured polymerization modes

Background. The use of bleaching agents might result in microstructural changes in tooth structure and in restorative materials. This study compared the effects of bleaching with %15 carbamide peroxide and %35 hydrogen peroxide on the flexural strength of Cention N restorative material using the self-cured and dual-cured polymerization modes. Methods. Sixty bar-shaped samples of Cention N restorative material were included in this in vitro study and assigned to three groups (n=20) randomly: control, bleaching with %15 carbamide peroxide and bleaching with %35 hydrogen peroxide. Each group was divided into two subgroups: samples polymerized in the self-cured mode and samples polymerized in the dual-cured mode. Then the flexurals trengths of the samples were determined. Two-way ANOVA was used to compare flexural strengths between the three groups in two polymerization modes, followed by post hoc Tukey test. Statisticals ignificance was defined at P<0.05. Results. The difference in the mean flexural strength was significant in terms of the bleaching regimen (P<0.001), with significantly lower flexural strength in the two bleaching groups compared to the control group. However, the mean flexural strengths were not significantly different in terms of the polymerization mode applied (P=0.14). Conclusion. The application of %15 carbamide peroxide and %35 hydrogen peroxide bleaching agents decreased the flexural strength of Cention N restorative material. Irrespective of the bleaching regimen, there was no significant difference in the flexural strength of Cention N between the self-curing and dual-curing polymerization modes.

Color stability, Roughness, and Microhardness of Enamel and Composites Submitted to Staining/Bleaching Cycles

Objective

To compare the effect of two bleaching systems (bleaching gel and whitening strips) on the color change, roughness, and microhardness of enamel and two resin composites.

Material and methods

Two cavities were prepared on bovine enamel specimens (n = 16) and restored with two composites: a nano-hybrid [Herculite Ultra (HU)] and a micro-hybrid composite [TPH Spectra (TS)]. Baseline color (CIE L*a*b*), roughness (μm), and microhardness (kgf/mm²) were measured using a spectrophotometer, optical profilometer, and Vickers microhardness (VHN) tester, respectively. The specimens were stained with coffee for 14 days, and randomized into two bleaching groups: gel and strips (n = 8), then submitted to a 10-day bleaching/staining test. Color, roughness, and microhardness were re-measured. The outcomes were analyzed using two-way ANOVA and Fisher’s-PLSD test (α = 0.05).

Results

Gel significantly improved the color (ΔE 4.9–8.3) and increased the roughness (Ra 0.04–0.08 μm) of all substrates (p < 0.0001) compared to strips. Enamel color was significantly improved (ΔE 5.4–8.3) compared to that of HU (ΔE 2.6–4.9) and TS (ΔE 2.0–4.9) with either gels or strips. TS roughness (0.03–0.08 μm) was significantly higher than that of enamel (0.01–0.05 μm) and HU (0.02–0.04 μm). Enamel had significantly reduced microhardness compared to HU (p = 0.0144).

Conclusion

Gels produced the greatest color improvement and roughness compared to strips. Enamel had significant color improvement but had the greatest decrease in microhardness.

Clinical significance

There was unacceptable color change between enamel and the composites after the combined cyclic effects of staining and bleaching.