Production of Turmeric Oleoresin Microcapsules by Complex Coacervation with Gelatin-Gum Arabic

The Release of Grape Pomace Phenolics from Alginate-Based Microbeads during Simulated Digestion In Vitro: The Influence of Coatings and Drying Method

Grape pomace is a byproduct of wineries and a sustainable source of bioactive phenolic compounds. Encapsulation of phenolics with a well-chosen coating may be a promising means of delivering them to the intestine, where they can then be absorbed and exert their health-promoting properties, including antioxidant, anti-inflammatory, anticancer, cardioprotective, and antimicrobial effects. Ionic gelation of grape pomace extract with natural coatings (sodium alginate and its combination with maltodextrins, gelatin, chitosan, gums Tragacanth and Arabic) was performed, and the resulting hydrogel microbeads were then air-, vacuum-, and freeze-dried to prevent spoilage. Freeze-drying showed advantages in preserving the geometrical parameters and morphology of the microbeads compared to other drying techniques. A good relationship was found between the physicochemical properties of the dried microbeads and the in vitro release of phenolics. Freeze-dried microbeads showed the highest cumulative release of phenols in the intestinal phase (23.65-43.27 mgGAE/gMB), while the most suitable release dynamics in vitro were observed for alginate-based microbeads in combination with gelatin, gum Arabic, and 1.5% (w/v) chitosan. The results highlight the importance of developing encapsulated formulations containing a natural source of bioactive compounds that can be used in various functional foods and pharmaceutical products.

Elevating meat products: Unleashing novel gel techniques for enhancing lipid profiles

Rising health concerns and the diet-health link drive demand for healthier foods, prompting meat manufacturers to reformulate traditional products. These manufacturers have reduced fat content to enhance nutritional quality, which is essential for maintaining desired product features. As a result, numerous strategies have emerged over recent decades to decrease fat and enhance the lipid profiles of meat products. Among these strategies, using hydrocolloids, emulsification, encapsulation, or gelation of oils to produce fat substitutes stands out. Using gels allows fat replacers with characteristics similar to animal fat (similar rheological, physical, or appearance properties) but with a much healthier lipid profile (by incorporating highly unsaturated oils). Therefore, this manuscript aims to comprehensively describe the main fat replacers used to prepare meat products. In addition, an in-depth review of the latest studies (2022-2023) that use novel gels to reform meat products has been made, indicating in each case the implications that the reformulation produces at a physicochemical, nutritional, and sensory level. Given the reported results, it seems clear that the strategy of using bigels or emulgels is very promising and allows obtaining nutritionally highly improved meat products without affecting their sensory or physicochemical properties. However, the best conditions to obtain a novel gel suitable for use as a fat substitute for each meat product still need to be studied and correctly defined. Moreover, these advancements can pave the way for more extensive studies on using novel gel techniques in other food industries, expanding their applicability and leading to healthier consumer options across various food categories.

Preparation of β-ionone microcapsules by gelatin/pectin complex coacervation

β-ionone has a unique violet odor and good biological activity, which is an essential fragrance component and potential anticancer drug. In this paper, β-ionone was encapsulated using complex coacervation of gelatin and pectin, followed by cross-linking with glutaraldehyde. The pH value, wall material concentration, core-wall ratio, homogenization conditions, and curing agent content were investigated in the single-factor experiments. For example, the encapsulation efficiency increased with the homogenization speed, which reached a relatively high value at 13000 r/min for 5 min. The gelatin/pectin ratio (3:1, w/w) and pH value (4.23) significantly affected the size, shape, and encapsulation efficiency of the microcapsule. The fluorescence microscope and SEM were used to characterize the morphology of the microcapsules, in which the microcapsule has a stable morphology, uniform size, and spherical multinuclear structure. FTIR measurements confirmed the electrostatic interactions between gelatin and pectin during complex coacervation. Thermogravimetric analysis (TGA) revealed that the microcapsules could maintain good thermal stability over 260 °C. The release rate of β-ionone microcapsule was only 20.6 % after 30 days at the low temperature of 4 °C. These findings provide an effective carrier to deliver flavors like β-ionone and could be useful in the fields of daily chemicals and textiles.

Coacervation as a Novel Method of Microencapsulation of Essential Oils-A Review

These days, consumers are increasingly "nutritionally aware". The trend of "clean label" is gaining momentum. Synthetic additives and preservatives, as well as natural ones, bearing the E symbol are more often perceived negatively. For this reason, substances of natural origin are sought tfor replacing them. Essential oils can be such substances. However, the wider use of essential oils in the food industry is severely limited. This is because these substances are highly sensitive to light, oxygen, and temperature. This creates problems with their processing and storage. In addition, they have a strong smell and taste, which makes them unacceptable when added to the product. The solution to this situation seems to be microencapsulation through complex coacervation. To reduce the loss of essential oils and the undesirable chemical changes that may occur during their spray drying-the most commonly used method-complex coacervation seems to be an interesting alternative. This article collects information on the limitations of the use of essential oils in food and proposes a solution through complex coacervation with plant proteins and chia mucilage.

Hydrolyzed Karaya Gum: Gelatin Complex Coacervates for Microencapsulation of Soybean Oil and Curcumin

This is the first report on utilizing hydrolyzed karaya gum (HKG) as a novel polyanion material for complex coacervation with gelatin A. With negative zeta potentials at pH > 2.5, HKG formed the complex coacervate with a maximum yield at pH 3.75 and 1 : 1 HKG:gelatin ratio. The optimal complex coacervates were used to encapsulate soybean oil containing curcumin using different shell:core ratios, homogenization speeds, concentrations of emulsifier, and drying techniques. Optical microscopy showed that increasing homogenization speed and Tween 80 concentration produced smaller and more uniform coacervate particles. Increasing the shell:core mass ratio from 1 to 4 resulted in a linear increase in encapsulation efficiencies for both soybean oil and curcumin. Accelerated peroxidation tests on the microcapsules showed enhanced protective effects against oil peroxidation when increasing shell:core ratios and using freeze-drying instead of oven-drying at 50 oC. In vitro release of curcumin in simulated gastric and intestinal fluids was faster when using freeze-drying and decreasing shell:core ratio. This study shows perspective novel applications of HKG in microencapsulating active ingredients for food and pharmaceutical industries.

Microstructures of encapsulates and their relations with encapsulation efficiency and controlled release of bioactive constituents: A review

Vitamins, peptides, essential oils, and probiotics are examples of health beneficial constituents, which are nevertheless heat-sensitive and possess poor chemical stability. Various encapsulation methods have been applied to protect these constituents against thermal and chemical degradations. Encapsulates prepared by different methods and/or at different conditions exhibit different microstructures, which in turn differently influence the encapsulation efficiency as well as retention of encapsulated core materials. This review provides a summary of various microstructures resulted from the use of selected encapsulation methods or systems, namely, spray coating; co-extrusion; emulsion-, micelle-, and liposome-based; coacervation; and ionic gelation encapsulation, at different conditions. Subsequent effects of the different microstructures on encapsulation efficiency and retention of encapsulated core materials are mentioned and discussed. Encapsulates having compact microstructures resulted from the use of low-surface tension and low-viscosity encapsulants, high-stability encapsulation systems, lower loads of core materials to total solids of encapsulants and appropriate solidification conditions have proved to exhibit higher encapsulation efficiencies and better retention of encapsulated core materials. Encapsulates with hollow, dent, shrunken microstructures or thinner walls resulted from inappropriate solidification conditions and higher loads of core materials, on the other hand, possess lower encapsulation efficiencies and protection capabilities. Encapsulates having crack, blow-hole or porous microstructures resulted from the use of high-viscosity encapsulants and inappropriate solidification conditions exhibit the lowest encapsulation efficiencies and poorest protection capabilities. Compact microstructures and structures formed between ionic biopolymers could be used to regulate the release of encapsulated cores.

Gum arabic and collagen hydrolysate extracted from hide fleshing wastes as novel wall materials for microencapsulation of Origanum onites L. essential oil through complex coacervation

Renewable resource-based biodegradable materials attract more attention than petroleum-based biodegradable materials to support the sustainable development of ecology. Obtaining collagen hydrolysate (CH) from hide fleshing wastes of leather industry is an environmentally friendly way to develop multifunctional materials that can contribute to technological advances in different industries. In this study, 2:1, 1:1, and 1 2 ratios of gum arabic (GA) and CH extracted from hide fleshing waste were used as wall materials to encapsulate Origanum onites L. essential oil (OOEO) using the complex coacervation method. The encapsulation yield and efficiency, functional group composition, particle size, morphology, and thermal stability of the obtained OOEO microcapsules were characterized. The results showed that the obtained microcapsules had high encapsulation yield and efficiency, as well as good functional properties such as uniform morphology and low water activity. The best mass ratio for the biopolymers (GA:CH) was 1:1. Scanning electron microscopy analysis showed that OOEO microcapsule samples had a spherical shape. FTIR analysis was performed on obtained microcapsules, confirming the molecular interactions between GA and CH. These findings can be useful in designing an ideal wall material using GA and CH for microencapsulation of essential oils by the complex coacervation method.

Complex coacervation assisted by a two-fluid nozzle for microencapsulation of ginger oil: Effect of atomization parameters

This study investigates the influence of the atomization parameters on complex coacervation by atomization, and is following a preceding study that presented the technique and investigated the effects of formulation. Complex coacervated capsules were produced by atomization, using emulsions with 1 and 6%(w/w) of gelatin and ginger oil atomized over a 1%(w/w) solution of gum Arabic, at constant polymer ratio of 1:2 (gelatin:gum Arabic) at pH 3.5. The air velocity at the nozzle varied from 72 to 168 m/s and the emulsion velocity at the nozzle varied from 0.4 to 0.6 m/s, maintaining the air to liquid velocity ratio at 170, 220 and 270. The mean diameter of the microcapsules produced varied from 52 to 75 μm and no crosslinking agents were used. The influence of atomization numbers Weber (We) and Ohnesorge (Oh), shear rate and shear stress on the encapsulation performance was carried out and a proposed model was able to predict the final size of the microcapsules produced at We ≥ 180 and Oh = 0.063. Encapsulation efficiency varied from 9 to 95%, and encapsulation yield varied from 50 to 99%. Finally, optimum conditions based on size prediction and microencapsulation parameters were proposed.

Properties and kinetics of the in vitro release of anthocyanin-rich microcapsules produced through spray and freeze-drying complex coacervated double emulsions

This study aimed to prepare anthocyanin-rich microcapsules by spray and freeze-drying complex coacervated double emulsion using gelatin-acacia gum (GE-AG) and chitosan-carboxymethylcellulose (CS-CMC) and to investigate their properties and in vitro release kinetics. Microencapsulation efficiency (MEE) of the microcapsules varied from 84.9% to 94.7%. CS-CMS microcapsules showed significantly higher MEEs than those of GE-AG microcapsules. A significant higher MEE and lower moisture content and hygroscopicity was observed in spray-dried double emulsion (SDE) microcapsules. Freeze-dried double emulsion (FDE) microcapsules possessed higher total anthocyanin and total phenolic contents. The best fit for release kinetics was achieved using first-order and Higuchi models for SDE and FDE microcapsules, respectively. Diffusion-controlled release in the simulated gastric fluid was found for SDE microcapsules, while erosion-controlled release in simulated gastric and intestinal fluids predominated for FDE microcapsules. These findings suggest that the microcapsules can be applied for loading anthocyanins as a nutraceutical with controllable release requirement.

Double encapsulation of fucoxanthin using porous starch through sequential coating modification with maltodextrin and gum Arabic

This study aims to assess the effect of gum Arabic (GA), maltodextrin (MD), or their combination as a coating agent at different ratios (1/3, 1/5, and 1/7 w/w) to encapsulate fucoxanthin. For this purpose, fucoxanthin was initially extracted and purified from Sargassum angustifolium brown seaweed and then loaded into porous starch (PS). The fucoxanthin-loaded PS samples were further contributed in another encapsulation process using the coating materials. All samples were evaluated in terms of encapsulation efficiency, Fourier-transform infrared (FTIR) spectroscopy and stability under light, dark and low or high temperature (4 and 50°C) exposure over a certain time period. Purification of fucoxanthin was verified through HPLC and NMR spectroscopy. It was shown that the subsequent coating with MD + GA (1/7 w/w) caused an enhanced encapsulation of fucoxanthin-loaded PS, reaching to about 96%. In addition, the stability of fucoxanthin-loaded PS was greatly influenced by light and high temperature exposure and decreased from 85% to 58% using the GA-coated material (1/3 w/w). First-order kinetic model was found to be fitted well on thermal degradation data of fucoxanthin. Interestingly, the mixture of MD + GA (1/7 w/w) exhibited the highest fucoxanthin prevention at the end of the storage period. Conclusively, the findings of this study can provide simple and facile protocol for food chemists in protecting the food ingredients using encapsulation process.

Use of gelatin and gum arabic for microencapsulation of probiotic cells from Lactobacillus plantarum by a dual process combining double emulsification followed by complex coacervation

The objectives of this study were i) to microencapsulate probiotic cells of Lactobacillus plantarum through a dual process consisting of emulsification followed by complex coacervation using gelatin and gum arabic, ii) to characterize the lyophilized microcapsules, iii) to evaluate their behavior in simulated in vitro gastrointestinal conditions and iv) to evaluate the survival of microencapsulated probiotic cells during 45 days of storage at 8 °C, 25 °C and -18 °C. The optimized conditions for complex coacervation consisted of a 50:50 biopolymer ratio and pH = 4.0. Emulsification was followed by complex coacervation using gelatin and gum arabic. The microcapsules presented dispersibility of 0.183 ± 0.17 g·mL^-1, moisture content of 4.5%, water activity of 0.34 ± 0.03 and hygroscopicity of 9.20 ± 0.43 g of absorbed water per 100 g. Their size ranged from 66.07 ± 3.04 μm to 105.66 ± 3.24 μm. Viability of the encapsulated L. plantarum cells was 8.6 log CFU·g^-1 and the encapsulation efficiency was 97.78%. After in vitro simulation of gastrointestinal conditions, viability of the encapsulated cells was 80.4% whereas it was only 25.0% for the free cells at 37 °C. Probiotic cell viability was maintained during storage at 8 °C and - 18 °C for 45 days.

Production and Storage Properties of Spray-Dried Red Beet Extract Using Polysaccharide-Based Carrier Systems

This study aimed to produce betalain-rich powders by spray drying red beet extract using modified starch and maltodextrin blends as carrier materials, as well as to investigate the product storage stability as affected by water sorption and light exposure. The influence of spray drying conditions and carrier blends on the process yield, water content and solubility of the powders, betalain retention, and color parameters was assessed using a central composite design 24. The results of this screening allowed selection of four samples to further evaluation concerning their morphological characteristics, particle size distribution, water sorption properties, and betalain stability under light exposure. Samples formulated with carrier blends composed of equal amounts of modified starch and maltodextrin, used in a concentration of 35 g carriers/110 g of initial solution resulted in the higher betalain stability during 98 days of storage under exposure to light. Even though this formulation showed similar water sorption behavior to the other formulations studied, it also showed the best mechanical properties, indicating lower susceptibility to powder collapse.

Microencapsulation of palm oil by complex coacervation for application in food systems

This study aimed at microencapsulating palm oil, containing high carotenoid content, with chitosan/xanthan and chitosan/pectin, using the complex coacervation method, followed by atomization and lyophilization. The DSC technique was used to confirm the encapsulation. The atomized microparticles had spherical shape and irregular size, and the lyophilized microparticles had irregular shape and size. Lyophilization resulted in lower carotenoids losses, and higher yield and encapsulation efficiency. In addition, the release profile in both water and gastrointestinal fluid was satisfactory. Prior to their application in food, a greater percentage of carotenoids was released in the fluid that simulates gastrointestinal conditions; however, the compounds were degraded after their release. In this case, the chitosan/pectin microparticles showed the best release profile. After processing, the release was lower and the released compounds were not degraded. Thus, the chitosan/xanthan microparticles showed the best potential for practical application, particularly, in yogurt preparation.

Elaboration of microparticles of carotenoids from natural and synthetic sources for applications in food

Carotenoids are susceptible to isomerization and oxidation upon exposure to oxygen, light and heat, which can result in loss of color, antioxidant activity, and vitamin activity. Microencapsulation helps retain carotenoid stability and promotes their release under specific conditions. Thus, the aim of the study was to encapsulate palm oil and β-carotene with chitosan/sodium tripolyphosphate or chitosan/carboxymethylcellulose and to assess the performance of these microparticles in food systems by analyzing their release profile under simulated gastric and intestinal conditions. Encapsulation efficiency was greater than 95%, and the yield of microparticles coated with chitosan/sodium tripolyphosphate was approximately 55%, while that of microparticles coated with chitosan/carboxymethylcellulose was 87%. Particles encapsulated with chitosan/carboxymethylcellulose exhibited ideal release behavior in water and gastric fluid, but showed low release in the intestinal fluid. However, when applied to food systems these particles showed enhanced carotenoid release but showed low release of carotenoids upon storage.

Use of herbs, spices and their bioactive compounds in active food packaging

Natural additives obtained from herbs and spices are being increasingly used in the food packaging industry.