Physical modifications of wheat gluten protein: An extensive review

Effects of konjac glucomannan with different degrees of deacetylation on the properties and structure of wheat gluten protein

The properties and structure of gluten protein with different deacetylation degrees of konjac glucomannan (KGM) were investigated, in an attempt to improve the quality of gluten protein in flour products. Results showed that deacetylated KGM (DKGM) could improve the textural properties and enhance the thermal stability of gluten protein. DKGM increased the water holding capacity and shortened the T2 relaxation time of gluten after removing some acetyl groups. As the deacetylation degree increased, the hardness and adhesiveness of gluten gels gradually increased, while the springiness decreased. In addition, the presence of DKGM promoted the conversion from free sulfhydryl to disulfide bonds and increased the β-sheet content in gluten protein. The low-deacetylation KGM decreased the surface hydrophobicity and fluorescence intensity of gluten protein, and the microstructures of gluten gels became more compact. Compared with gluten protein-KGM complex gel, the degradation temperature of gluten protein-DKGM complex gels was observed to increase by >3 °C. Overall, the low-deacetylation KGM was beneficial for improving the physicochemical properties and maintaining the network structure of gluten protein. This study provides valuable references and practical insights to improve gluten quality in the flour industry.

Proteins from Legumes, Cereals, and Pseudo-Cereals: Composition, Modification, Bioactivities, and Applications

This review presents a comprehensive analysis of plant-based proteins from soybeans, pulses, cereals, and pseudo-cereals by examining their structural properties, modification techniques, bioactivities, and applicability in food systems. It addresses the critical need for a proper utilization strategy of proteins from various plant sources amidst the rising environmental footprint of animal protein production. The inherent composition diversity among plant proteins, their nutritional profiles, digestibility, environmental impacts, and consumer acceptance are compared. The innovative modification techniques to enhance the functional properties of plant proteins are also discussed. The review also investigates the bioactive properties of plant proteins, including their antioxidant, antimicrobial, and antitumoral activities, and their role in developing meat analogs, dairy alternatives, baked goods, and 3D-printed foods. It underscores the consideration parameters of using plant proteins as sustainable, nutritious, and functional ingredients and advocates for research to overcome sensory and functional challenges for improved consumer acceptance and marketability.

Structure-based modification of a-amylase by conventional and emerging technologies: Comparative study on the secondary structure, activity, thermal stability and amylolysis efficiency

α-Amylase is an endo-enzyme that catalyzes the hydrolysis of starch into shorter oligosaccharides. α-Amylase plays a crucial role in various industries. Manipulated α-amylases are of particular interest due to their remarkable amylolysis efficiency and thermostability for large-scale biotechnological processes. The retained catalytic activity of enzymes is decreased according to extreme pH, temperature, pressure, and chemical reagents. Broad industrial applications of α-amylases need special properties such as stability against temperature, pH, and chelators, and also attain reusability, desirable enzymatic activity, efficiency, and selectivity. Considering the biotechnological importance of α-amylase, its high stability is the most critical challenge for its economic viability. Therefore, improving its functionality and stability recently gained much interest. To achieve this purpose, various emerging technologies in combination with conventional methods on α-Amylases with different sources have been conducted. The present review is an attempt to summarize the effect of various conventional methods and emerging technologies employed to date on α-amylase secondary structure, thermal stability, and performance.

Advancements, limitations and challenges in hyperspectral imaging for comprehensive assessment of wheat quality: An up-to-date review

The potential of hyperspectral imaging technology (HIT) for the determination of physicochemical and nutritional components, evaluation of fungal/mycotoxins contamination, wheat varieties classification, identification of non-mildew-damaged wheat kernels, as well as detection of flour adulteration is comprehensively illustrated and reviewed. The latest findings (2018-2023) of HIT in wheat quality evaluation through internal and external attributes are compared and summarized in detail. The limitations and challenges of HIT to improve assessment accuracy are clearly described. Additionally, various practical recommendations and strategies for the potential application of HIT are highlighted. The future trends and prospects of HIT in evaluating wheat quality are also mentioned. In conclusion, HIT stands as a cutting-edge technology with immense potential for revolutionizing wheat quality evaluation. As advancements in HIT continue, it will play a pivotal role in shaping the future of wheat quality assessment and contributing to a more sustainable and efficient food supply chain.

Natural polysaccharides and proteins-based films for potential food packaging and mulch applications: A review

Conventional nondegradable packaging and mulch films, after reaching the end of their use, become a major source of waste and are primarily disposed of in landfills. Accumulation of non-degradable film residues in the soil leads to diminished soil fertility, reduced crop yield, and can potentially affect humans. Application of degradable films is still limited due to the high cost, poor mechanical, and gas barrier properties of current biobased synthetic polymers. In this respect, natural polysaccharides and proteins can offer potential solutions. Having versatile functional groups, three-dimensional network structures, biodegradability, ease of processing, and the potential for surface modifications make polysaccharides and proteins excellent candidates for quality films. Besides, their low-cost availability as industrial waste/byproducts makes them cost-effective alternatives. This review paper covers the performance properties, cost assessment, and in-depth analysis of macromolecular structures of some natural polysaccharides and proteins-based films that have great potential for packaging and mulch applications. Proper dissolution of biopolymers to improve molecular interactions and entanglement, and establishment of crosslinkages to form an ordered and cohesive polymeric structure can help to obtain films with good properties. Simple aqueous-based film formulation techniques and utilization of waste/byproducts can stimulate the adoption of affordable biobased films on a large-scale.

Measurement and calibration of gluten pellets discrete element parameters at varied moisture content

To quickly calibrate the discrete element parameters (DEP) of pellets with different moisture content (MC), the angle of repose (AoR) was taken as the target value to conduct experimental and simulation research on gluten pellets. The experimental method obtained the intrinsic parameters, contact parameters, and AoR of pellets with different moisture content. The parameters differed significantly under different moisture content (p < 0.05). The AoR-MC model (R2  = 0.987) was established. The Plackett-Burman test, steepest ascent test, and center compound test were carried out to establish the AoR-DEP model (R2  = 0.969) with a relative error less than or equal to 2.07%. The MC-DEP model was derived, and verified by the side plate lifting method with a relative error less than or equal to 2.58%. This paper provides a new method for calibrating DEP under different moisture content.

Gliadin and glutenin genomes and their effects on the technological aspect of wheat-based products

Wheat is the most important crops worldwide, providing about one-fifth of the daily protein and calories for human consumption. The quality of cereal-based products is principally governed by the genetic basis of gluten (glutenin and gliadin proteins), which exists in a wide range of variable alleles and is controlled by clusters of genes. There are certain limitations associated with gluten characteristics, which can be genetically manipulated. The present review aimed to investigate the correlation between the genetic characteristics of gluten protein components and wheat-based product's quality. According to various references, Glu-B1d (6 + 8), Glu-B1h (14 + 15) and Glu-B1b (7 + 8) are related to higher gluten strength and pasta quality, while, subunits Dx2 + Dy12 and Dx5 + Dy10, are usually present at the Glu-D1 locus in bread wheat, resulted in lower cooked firmness in pasta. Moreover, introducing Gli-D1/Glu-D3 and Glu-D1 loci into durum wheat genomes, causing to provide the maximum values of gluten index in pasta products. 1Dx5 + 1Dy10 alleles determine the level of increase in dough's consistency, elasticity, viscosity, and extensibility quality of baking and appropriate bread loaf volume, while 1Dx2 + 1Dy12 as the alleles associated with poor baking quality, being more suitable for soft wheat/pastry end uses. Bx7, Bx7OE, 1Bx17 + 1By18, 1Bx13 + 1By16, Bx7 + By9 and 1Bx7 + 1By8 at Glu-B1alleles and 1Ax2* found on Glu-A1, augmented dough strength and has positive effects on consistency, extensibility, viscosity, and elasticity of bread dough. Breeding programs by genome editing have made gluten a promoting component for improving cereal-based products.

Precooking treatments affect the sensory and tensile properties of autoclaved recooked noodles via moisture distribution and protein structure

To improve the quality of autoclaved recooked noodles (ARNs), this study explored the effects of precooking on the sensory and tensile properties of ARNs from the perspectives of changes in protein structure and water distribution. The results showed that the ARNs of two kinds of pretreatments (Boiling 2 min, Boiling 1 min + Steaming 2 min) presented the best sensory quality (average score ≥ 7.50) and high tensile properties (tensile distance ≥ 45.24 mm). After autoclaving and recooking, the proportion of tightly bound water increased by 11.30%-12.52%, resulting in stronger water-solid interaction. The results of laser confocal microscopy (CLSM) proved that a strengthened gluten network (protein percentage area ≥ 40.28%; junction density ≥ 10.96 × 10^-4) appeared. Therefore, appropriate precooking treatment could effectively improve the sensory quality and tensile properties of ARNs by enhancing the tightly bound water ratio and strengthening the gluten network.

Effect of lactylation on functional and structural properties of gluten

Gluten is widely used as a high-quality protein material in the food industry, however, low solubility restricts its development and applications. In this study, gluten was treated with lactate and sodium lactate for lactylation. Lactylation of gluten altered surface charges of the protein, leading to a significant improvement in the solubility. An improvement in oil absorption capacity (OAC) could be attributed to a decrease in protein folding degree after lactylation. In addition, the emulsifying properties of gluten were significantly enhanced. The introduction of lactate group also significantly increased the viscoelasticity of gluten. Fourier transform infrared spectroscopy (FTIR) showed there was a significant decrease in β-turns content and a significant increase in β-sheets content. The folded conformation of gluten was gradually extended after lactation by fluorescence spectroscopy measurement. Both in lactate and sodium lactate treatment, the maximum emission wavelength indicated a blue shift, and the UV intensity showed an increase. These results could demonstrate that lactylation could extend the structure and improve the functional property.

Influence of Farming System and Forecrops of Spring Wheat on Protein Content in the Grain and the Physicochemical Properties of Unsonicated and Sonicated Gluten

The potential for enhancing the spring wheat protein content by different cultivation strategies was explored. The influence of ultrasound on the surface and rheological properties of wheat-gluten was also studied. Spring wheat was cultivated over the period of 2018-2020 using two farming systems (conventional and organic) and five forecrops (sugar beet, spring barley, red clover, winter wheat, or oat). The obtained gluten was sonicated using the ultrasonic scrubber. For all organically grown wheat, the protein content was higher than for the conventional one. There was no correlation between the rheological properties of gluten and the protein content in the grain. Gluten derived from organically grown wheat was more elastic than those derived from the conventional one. Sonication enhanced the elasticity of gluten. The sonication effect was influenced by the forecrops. The most elastic gluten after sonication was found for organic barley and sugar beet. The lowest values of tan (delta) were noted for conventional wheat and conventional oat. Cultivation in the monoculture gave gluten with a smaller susceptibility to increase elasticity after sonic treatment. Sonication promoted the cross-linking of protein molecules and induced a more hydrophobic character, which was confirmed by an increment in contact angles (CAs). Most of the organically grown wheat samples showed a lower CA than the conventional ones, which indicated a less hydrophobic character. The gluten surface became rougher with the sonication, regardless of the farming system and applied forecrops. Sonication treatment of gluten proteins rearranged the intermolecular linkages, especially disulfide and hydrophobic bonds, leading to changes in their surface morphology.