Effects of pressure and multiple passes on the physicochemical and microbial characteristics of lupin‐based beverage treated with high‐pressure homogenization

Fortification of Pea and Potato Protein Isolates in Oat-Based Milk Alternatives; Effects on the Sensory and Volatile Profile

Oat-based milk alternatives (OMAs) are an important alternative to bovine milk, with prevalence of lactose intolerance, as well as soy and nut allergies limiting consumers options. However, OMAs are typically lower in protein content than both bovine milk and soy-based alternatives, with protein quality limited by low lysine levels, which can reduce protein digestibility. Addition of alternative plant proteins may increase the quantity of protein, as well as balancing the amino acid profile. However, plant-based proteins have additional sensory qualities and off-flavours, which may lead to undesirable characteristics when introduced to OMAs. This study aimed to assess the effect of pea and potato protein addition on the sensory profile, volatile profile, colour, and particle size in an OMA control product. Results demonstrated that pea protein contributed to a bitter and metallic taste, astringent aftertaste, and a significantly increased overall aroma correlated with higher levels of key volatiles. Whilst potato protein resulted in less flavour changes, it did lead to increased powdery mouthfeel and mouthcoating supported by a substantially increased particle size. Both protein fortifications led to detectable colour changes and a staler flavour. Fortification of OMA product with the pea protein led to significant sensory, volatile and physical changes, whilst the potato protein led to predominantly physical changes. Further investigation into alternative plant-based proteins is necessary to optimise sensory qualities whilst increasing protein content and the amino acid profile.

Physical Stability of Lotus Seed and Lily Bulb Beverage: The Effects of Homogenisation on Particle Size Distribution, Microstructure, Rheological Behaviour, and Sensory Properties

The lotus seed and lily bulb beverage (LLB) has a problem with solid particle sedimentation. To address this issue, LLB was homogenised twice at different pressures (0~100 MPa) using a homogeniser. This study aims to investigate the changes in the particle size distribution (PSD), microstructure, rheological behaviour, sedimentation index (IS), turbidity, physicochemical properties, and sensory quality of LLBs after homogenisation treatments. The results regarding PSD and microstructure showed that the suspended particles were decomposed at high pressure with increasing homogenisation pressure, forming small particles of cellular material, cell wall fragments, fibre fractions, and polymers. The LLB showed shear-thinning behaviour and weak gelation characteristics (G' > G″) and rheological properties. Among all homogenisation pressures, the 60 MPa sample showed the lowest sedimentation rate and the highest turbidity. When the pressure was increased from 0 to 100 MPa, the total soluble solid (TSS) content showed an upward trend, while the ascorbic acid content (AAC) gradually decreased. The highest sensory evaluation was observed in the 60 MPa sample in terms of overall acceptability.

Oat milk analogue versus traditional milk: Comprehensive evaluation of scientific evidence for processing techniques and health effects

Milk, enriched with high-quality protein, is a healthy and nutritious food that meets people's needs. However, consumers are turning their attention to plant-based milk due to several concerns, such as lactose intolerance, allergies and some diseases caused by milk; carbon emission from cattle farming; economical aspects; and low access to vitamins and minerals. Oat milk, which is produced from whole grain oats, is lactose free and rich in a variety of nutrients and phytochemicals. With the significant development of food processing methods and advancement in milk simulation products, the production of plant-based milk, such as cereal milk, has greatly progressed. This review described some features of oat milk analogue versus traditional milk and compared the properties, processing technologies, health effects, environmental friendliness, and consumer acceptance of these products. It is expected to provide a reference for evaluating development trends and helping consumers choose between oat milk and traditional milk.

Fruit-Based Fermented Beverages: Contamination Sources and Emerging Technologies Applied to Assure Their Safety

The food and beverage market has become broader due to globalization and consumer claims. Under the umbrella of consumer demands, legislation, nutritional status, and sustainability, the importance of food and beverage safety must be decisive. A significant sector of food production is related to ensuring fruit and vegetable conservation and utilization through fermentation. In this respect, in this review, we critically analyzed the scientific literature regarding the presence of chemical, microbiological and physical hazards in fruit-based fermented beverages. Furthermore, the potential formation of toxic compounds during processing is also discussed. In managing the risks, biological, physical, and chemical techniques can reduce or eliminate any contaminant from fruit-based fermented beverages. Some of these techniques belong to the technological flow of obtaining the beverages (i.e., mycotoxins bound by microorganisms used in fermentation) or are explicitly applied for a specific risk reduction (i.e., mycotoxin oxidation by ozone). Providing manufacturers with information on potential hazards that could jeopardize the safety of fermented fruit-based drinks and strategies to lower or eliminate these hazards is of paramount importance.

Quality and health dimensions of pulse-based dairy alternatives with chickpeas, lupins and mung beans

Health and environmental issues regarding dairy consumption have been highlighted in recent years leading to tremendous consumer demand for plant-based substitutes. In this review, we focused on quality and health dimensions of pulse-based dairy alternatives (PuBDA) using chickpeas, lupins and mung beans. Appraisal of existing documents show that there is limited information on PuBDA with the said pulses compared to similar materials such as soy and pea. Most of the studies focused on milk or fermented milks, either in full or partial substitution of the dairy ingredients with the pulses. Issues on stability, sensory properties, shelf life and nutritional quality were underlined by existing literature. Although it was emphasized in some reports the health potential through the bioactive components, there is scarce data on clinical studies showing actual health benefits of the featured PuBDA in this paper. There is also a scant number of these PuBDA that are currently available in the market and in general, these products have inferior nutritional quality compared to the animal-based counterparts. Technological innovations involving physical, biological and chemical techniques can potentially address the quality problems in the use of chickpeas, lupins, and mung beans as raw materials in dairy alternatives.

Dynamic high pressure treatments: current advances on mechanistic-cum-transport phenomena approaches and plant protein functionalization

Dynamic high pressure treatment (DHPT) either by high pressure homogenization or microfluidisation, is an emerging concept used in the food industry for new products development through macromolecules modifications in addition to simple mixing and emulsification action. Mechanistic understanding of droplets breakup during high pressure homogenization is used to understand how these compact and high molecular weight-sized globular plant proteins are affected during DHPTs. Plant protein needs to be functionalized for advanced use in food formulation. DHPTs brought changes in plant proteins' secondary, tertiary, and quaternary structures through alterations in intermolecular and intramolecular interactions, sulfhydryl groups, and disulfide bonds. These structural changes in plant proteins affected their functional and physicochemical properties like solubility, oil and water holding capacity, gelation, emulsification, foaming, and rheological properties. These remarkable changes made utilization of this concept in novel food system applications like in plant-based dairy analogues. Overall, this review provides a comprehensive and critical understanding of DHPTs on their mechanistic and transport approaches for droplet breakup, structural and functional modification of plant macromolecules. This article also explores the potential of DHPT for formulating plant-based dairy analogues to meet healthy and sustainable food consumption needs. HIGHLIGHTSIt critically reviews high pressure homogenization (HPH) and microfluidisation (DHPM).It explores the mechanistic and transport phenomena approaches of HPH and DHPMHPH and DHPM can induce conformational and structural changes in plant proteins.Improvement in the functional properties of HPH and DHPM treated plant proteins.HPH and DHPM are potentially applicable for plant based dairy alternatives food system.

Ingredients, Processing, and Fermentation: Addressing the Organoleptic Boundaries of Plant-Based Dairy Analogues

Consumer interest and research in plant-based dairy analogues has been growing in recent years because of increasingly negative implications of animal-derived products on human health, animal wellbeing, and the environment. However, plant-based dairy analogues face many challenges in mimicking the organoleptic properties of dairy products due to their undesirable off-flavours and textures. This article thus reviews fermentation as a viable pathway to developing clean-label plant-based dairy analogues with satisfactory consumer acceptability. Discussions on complementary strategies such as raw material selection and extraction technologies are also included. An overview of plant raw materials with the potential to be applied in dairy analogues is first discussed, followed by a review of the processing steps and innovative techniques required to transform these plant raw materials into functional ingredients such as plant-based aqueous extracts or flours for subsequent fermentation. Finally, the various fermentation (bacterial, yeast, and fungal) methodologies applied for the improvement of texture and other sensory qualities of plant-based dairy analogues are covered. Concerted research efforts would be required in the future to tailor and optimise the presented wide diversity of options to produce plant-based fermented dairy analogues that are both delicious and nutritionally adequate.

Legumes and Legume-Based Beverages Fermented with Lactic Acid Bacteria as a Potential Carrier of Probiotics and Prebiotics

Fermentation is widely used in the processing of dairy, meat, and plant products. Due to the growing popularity of plant diets and the health benefits of consuming fermented products, there has been growing interest in the fermentation of plant products and the selection of microorganisms suitable for this process. The review provides a brief overview of lactic acid bacteria (LAB) and their use in fermentation of legumes and legume-based beverages. Its scope also extends to prebiotic ingredients present in legumes and legume-based beverages that can support the growth of LAB. Legumes are a suitable matrix for the production of plant-based beverages, which are the most popular products among dairy alternatives. Legumes and legume-based beverages have been successfully fermented with LAB. Legumes are a natural source of ingredients with prebiotic properties, including oligosaccharides, resistant starch, polyphenols, and isoflavones. These compounds provide a broad range of important physiological benefits, including anti-inflammatory and immune regulation, as well as anti-cancer properties and metabolic regulation. The properties of legumes make it possible to use them to create synbiotic food, which is a source of probiotics and prebiotics.

Impact of High-Pressure Homogenization Parameters on Physicochemical Characteristics, Bioactive Compounds Content, and Antioxidant Capacity of Blackcurrant Juice

High-pressure homogenization (HPH) is one of the food-processing methods being tested for use in food preservation as an alternative to pasteurization. The effects of the HPH process on food can vary depending on the process parameters used and product characteristics. The study aimed to investigate the effect of pressure, the number of passes, and the inlet temperature of HPH processing on the quality of cloudy blackcurrant juice as an example of food rich in bioactive compounds. For this purpose, the HPH treatment (pressure of 50, 150, and 220 MPa; one, three, and five passes; inlet temperature at 4 and 20 °C) and the pasteurization of the juice were performed. Titratable acidity, pH, turbidity, anthocyanin, vitamin C, and total phenolics content, as well as colour, and antioxidant activity were measured. Heat treatment significantly decreased the quality of the juice. For processing of the juice, the best were the combinations of the following: one pass, the inlet temperature of 4 °C, any of the used pressures (50, 150, and 220 MPa); and one pass, the inlet temperature of 20 °C, and the pressure of 150 MPa. Vitamin C and anthocyanin degradation have been reported during the HPH. The multiple passes of the juice through the machine were only beneficial in increasing the antioxidant capacity but negatively affected the colour stability.

High Homogenization Pressures to Improve Food Quality, Functionality and Sustainability

Interest in high homogenization pressure technology has grown over the years. It is a green technology with low energy consumption that does not generate high CO2 emissions or polluting effluents. Its main food applications derive from its effect on particle size, causing a more homogeneous distribution of fluid elements (particles, globules, droplets, aggregates, etc.) and favoring the release of intracellular components, and from its effect on the structure and configuration of chemical components such as polyphenols and macromolecules such as carbohydrates (fibers) and proteins (also microorganisms and enzymes). The challenges of the 21st century are leading the processed food industry towards the creation of food of high nutritional quality and the use of waste to obtain ingredients with specific properties. For this purpose, soft and nonthermal technologies such as high pressure homogenization have huge potential. The objective of this work is to review how the need to combine safety, functionality and sustainability in the food industry has conditioned the application of high-pressure homogenization technology in the last decade.

Development of Next-Generation Nutritionally Fortified Plant-Based Milk Substitutes: Structural Design Principles

Consumers are increasingly interested in decreasing their dietary intake of animal-based food products, due to health, sustainability, and ethical concerns. For this reason, the food industry is creating new products from plant-based ingredients that simulate many of the physicochemical and sensory attributes associated with animal-derived foods, including milk, eggs, and meat. An understanding of how the ingredient type, amount, and organization influence the desirable physicochemical, sensory, and nutritional attributes of these plant-based foods is required to achieve this goal. A potential problem with plant-based diets is that they lack key micronutrients, such as vitamin B12, vitamin D, calcium, and ω-3 fatty acids. The aim of this review is to present the science behind the creation of next-generation nutritionally fortified plant-based milk substitutes. These milk-like products may be formed by mechanically breaking down certain plant materials (including nuts, seeds, and legumes) to produce a dispersion of oil bodies and other colloidal matter in water, or by forming oil-in-water emulsions by homogenizing plant-based oils and emulsifiers with water. A brief overview of the formulation and fabrication of plant-based milks is given. The relationship between the optical properties, rheology, and stability of plant-based milks and their composition and structure is then covered. Approaches to fortify these products with micronutrients that may be missing from a plant-based diet are also highlighted. In conclusion, this article highlights how the knowledge of structural design principles can be used to facilitate the creation of higher quality and more sustainable plant-based food products.

Techno-Functional, Nutritional and Environmental Performance of Protein Isolates from Blue Lupin and White Lupin

Similarly prepared protein isolates from blue lupin (Lupinus angustifolius) and white lupin (L. albus) were assessed in relation to their composition, functional properties, nutritional attributes and environmental impacts. Blue lupin protein isolate (BLPI) and white lupin protein isolate (WLPI) were found to be quite similar in composition, although differences in the electrophoretic protein profiles were apparent. Both lupin protein isolates (LPIs) had good protein solubility (76.9% for BLPI and 69.8% for WLPI at pH 7) and foaming properties. However, a remarkable difference in heat gelation performance was observed between BLPI and WLPI. WLPI had a minimum gelling concentration of 7% protein, whereas BLPI required 23% protein in order to form a gel. WLPI also resulted in stronger gels over a range of concentrations compared to BLPI. Nutritional properties of both LPIs were similar, with no significant differences in in vitro protein digestibility (IVPD), and both had very low trypsin inhibitor activity (TIA) and fermentable oligo-, di- and monosaccharides, and polyols (FODMAP) content. The amino acid profiles of both LPIs were also similar, with sulfur-containing amino acids (SAAs) being the limiting amino acid in each case. Environmental impacts revealed by the life cycle assessment (LCA) were almost identical for BLPI and WLPI, and in most categories the LPIs demonstrated considerably better performance per kg protein when compared to cow's whole milk powder.