The synergistic effect of ultrasound and microwave on the physical, chemical, textural, and microstructural properties of vacuum fried Chinese yam ( Dioscorea polystachya )

Tri-frequency simultaneous ultrasound pickling for the acceleration of the NaCl content and quality improvement of pork (longissimus dorsi)

BACKGROUND

The pickling process with NaCl is an essential step for pork preservation. This study aimed to investigate the effect of different ultrasonic intensities of tri-frequency simultaneous ultrasound (TSIU) pickling on the NaCl content and quality of pork (longissimus dorsi). After 30 min pickling, the NaCl content, moisture content, pickling yield, cooking loss, textural properties, color, pH, moisture migration and distribution as well as microstructure of pork were assessed.

RESULTS

Results showed that among all the ultrasonic treatment intensities (85-150 W L-1), the NaCl content of the sample pickled by an intensity of 101.3 W L-1 was higher than that of other intensities. TSIU 101.3 W L-1 showed 59.95% higher NaCl content than the control sample. In addition, the sample treated with TSIU of 101.3 W L-1 had higher pickling yield and moisture content, better textural properties of pork (including hardness and chewiness), and less cooking loss. The results of the low-field nuclear magnetic resonance showed that, compared with the control group, the relaxation time T21 of the ultrasound-assisted pickling samples increased, while the proportion of T22 (A22) reduction ranged from 175.0% to 379.9%. The microstructure designated that the ultrasonic treatment could facilitate changes in meat texture.

CONCLUSION

Ultrasound marination of different intensities promoted the diffusion of NaCl and affected the quality of pork tenderloins. The TSIU at 101.3 W L-1 could better accelerate NaCl transport and homogeneous distribution on meat, thereby improving the sample quality. © 2024 Society of Chemical Industry.

Advancing green extraction of bioactive compounds using deep eutectic solvent-based ultrasound-assisted matrix solid-phase dispersion: Application to UHPLC-PAD analysis of alkaloids and organic acids in Coptidis rhizoma

The utilization of deep eutectic solvents (DES) in sustainable extracting and separating of phytochemicals shows promising prospect. An exceptionally fast, eco-friendly, and sustainable approach was proposed for extracting bioactive compounds from Coptidis Rhizoma based on deep eutectic solvent-based ultrasound-assisted matrix solid phase dispersion (DES-UA-MSPD). Single-factor experiments and Box-Behnken design were utilized to explore the optimal extraction conditions. The analysis indicated that the acidic DES, especially betaine-acrylic acid (Bet-Aa 1:4 mol/mol) with 50% water content, was proved to be the most effective medium for the extraction of alkaloids (magnoflorine, groenlandicine, coptisine, epiberberine, berberine and palmatine) and organic acid (chlorogenic acid). With the parameters optimized, the total maximum extraction yield of alkaloids and organic acids reached 128.83 mg g-1 applying the optimal DES, which was 1.33-5.33 folds higher than conventional extraction solvents. Additionally, through microstructure analysis using scanning electron microscopy, density functional theory , and frontier molecular orbitals theory, a deeper understanding of the extraction principle was gained, and the molecular mechanism of DES synthesis and the interactions between target compounds were systematically elucidated. The sustainable and green potential of the DES-UA-MSPD method was demonstrated through Green Analytical Procedure Indexanalysis. The overall results of this investigation revealed that the proposed technology was a highly promising and sustainable alternative for effective extraction and quantification of natural products.

Quality and stability of frying oils and fried foods in ultrasound and microwave-assisted frying processes and hybrid technologies

Frying is a popular cooking method that produces delicious and crispy foods but can also lead to oil degradation and the formation of health-detrimental compounds in the dishes. Chemical reactions such as oxidation, hydrolysis, and polymerization contribute to these changes. In this context, emerging technologies like ultrasound-assisted frying (USF) and microwave (MW)-assisted frying show promise in enhancing the quality and stability of frying oils and fried foods. This review examines the impact of these innovative technologies, delving into the principles of these processes, their influence on the chemical composition of oils, and their implications for the overall quality of fried food products with a focus on reducing oil degradation and enhancing the nutritional and sensory properties of the fried food. Additionally, the article initially addresses the various reactions occurring in oils during the frying process and their influencing factors. The advantages and challenges of USF and MW-assisted frying are also highlighted in comparison to traditional frying methods, demonstrating how these innovative techniques have the potential to improve the quality and stability of oils and fried foods.

Research progress and application of ultrasonic- and microwave-assisted food processing technology

Microwaves are electromagnetic waves of specific frequencies (300 MHz-3000 GHz), whereas ultrasonic is mechanical waves of specific frequencies. Microwave and ultrasonic technology as a new processing method has been widely used in food processing fields. Combined ultrasonic and microwave technology is exploited by researchers as an improvement technique and has been successfully applied in food processing such as thawing, drying, frying, extraction, and sterilization. This paper overviews the principle and characteristics of ultrasonic- and microwave-assisted food processing techniques, particularly their combinations, design of equipment, and their applications in the processing of agricultural products such as thawing, drying, frying, extraction, and sterilization. The combination of ultrasonic and microwave is applied in food processing, where microwave enhances the heating rate, and ultrasonic improves the efficiency of heat and mass transfer. The synergy of the heating effect of microwave and the cavitation effect of ultrasonic improves processing efficiency and damages the cell structure of the material. The degradation of nutrient composition and energy consumption due to the short processing time of combined ultrasonic and microwave technology is decreased. Ultrasonic technology, as an auxiliary means of efficient microwave heating, is pollution-free, highly efficient, and has a wide range of applications in food processing.

Impact of different microwave treatments on food texture

Electromagnetic waves are frequently used for food processing with commercial or domestic type microwave ovens at present. Microwaves cause molecular movement by the migration of ionic particles or rotation of dipolar particles. Considering the potential applications of microwave technique in food industry, it is seen that microwaves have many advantages such as saving time, better final product quality (more taste, color, and nutritional value), and rapid heat generation. Although microwave treatment used for food processing with developing technologies have a positive effect in terms of time, energy, or nutrient value, it is also very important to what extent they affect the textural properties of the food that they apply to. For this purpose, in this study, it has been investigated that the effects of commonly used microwave treatments such as drying, heating, baking, cooking, thawing, toasting, blanching, frying, and sterilization on the textural properties of food. In addition, this study has also covered the challenges of microwave treatments and future work. In conclusion, microwave treatments cause energy saving due to a short processing time. Therefore, it can be said that it affects the textural properties positively. However, it is important that the microwave processing conditions used are chosen appropriately for each food material.

Evaluation of the Thermophysical, Sensory, and Microstructural Properties of Colombian Coastal Carimañola Obtained by Atmospheric and Vacuum Frying

The quality of fried products affects consumer purchase decisions, and frying is an important stage in the production process. The objective of this research was to evaluate the thermophysical properties, the sensory quality, and microstructure of Colombian coastal Carimañola traditionally manufactured, in atmospheric frying and vacuum frying conditions. Lower moisture and fat content were reported in samples fried under vacuum compared to samples fried under atmospheric conditions, which is associated with the vacuum pressure during the process. Thermophysical properties, related to heat transfer in the samples, showed a correlation between thermal conductivity and moisture content. The micrographs visualized the changes in the porous structure of the coastal Carimañola. A greater effect was evidenced in the samples obtained by atmospheric frying because higher temperatures were used. The sensory evaluation reflected a preference for Carimañolas made with conventional frying. This research provides a basis for consumer purchases of traditionally fried products made with vacuum frying.

Characterization of antioxidant compounds extracted from Citrus reticulata cv. Chachiensis using UPLC-Q-TOF-MS/MS, FT-IR and scanning electron microscope

Citrus reticulata cv. Chachiensis (CRC) has been widely used in many Chinese medicine prescriptions and developed as various health products. Due to its extensive biological activities, increased interest has focused on CRC as a potential source for the treatment of various diseases. However, there is no systematic and sufficient research on optimization and characterization of ultrasound extraction of antioxidant compounds from CRC up to now. In the present work, three parameters including ultrasonic amplitude (45, 55, 70, 85, 95 %), ultrasonic time (26, 40, 60, 80, 94 min) and ethanol concentration (16, 30, 50, 70, 84 %, v/v) were estimated using central-composite design. Determined optimum conditions, considering four responses (TPC, TFC, DPPH and ABTS) at the same time, were 72 % amplitude, 80 min and 70 % ethanol concentration. The maximum yields were TPC values (145.73 mg GAE/g), TFC values (135.21 mg QE/g), DPPH and ABTS scavenging capacity (87.88 and 76.18 mg TE/g, respectively). 55 phytochemicals were identified in the CRC extract using the UPLC-QTOF-MS/MS, 34 of which were flavonoids, which provided important support for various potential applications of CRC.