Visualization and characterization of engineered nanoparticles in complex environmental and food matrices using atmospheric scanning electron microscopy

Nanoparticles of dust as an emerging contaminant in urban environments

Due to very high mobility in the environment and penetration ability into living organisms, nanoparticles (NPs) of urban dust pose a potential threat to human health and urban ecosystems. Currently, data on the chemical composition of NPs of urban dust, their fate in the environment, and corresponding risks are rather limited. In the present work, NPs of deposited urban dust have been comprehensively studied for the first time; NPs isolated from 78 samples of dust collected in Moscow, the largest megacity in Europe, being taken as example. The elemental composition, potential sources as well as environmental, ecological, and health risks of NPs of urban dust are assessed. It is found that dust NPs are extremely enriched by Cu, Hg, Zn, Mo, Sb, and Pb, and can serve as their carrier in urban environments. No regularities in the spatial distribution of elements have been found, probably, due to high mobility of dust NPs. High ecological and health risks caused by dust NPs are demonstrated. Source apportionment study has evaluated one natural and two anthropogenic sources of elements in NPs of urban dust; the contribution of natural and anthropogenic sources being comparable. It is also shown that dust NPs may be considered as an important carrier of trace elements in urban aquatic systems. Additionally, the risks associated with NPs and bulk samples of dust have been compared. The observed risks associated with NPs are significantly higher.

The Combined ICP-MS, ESEM-EDX, and HAADF-STEM-EDX Approach for the Assessment of Metal Sub-Micro- and Nanoparticles in Wheat Grain

Metal sub-microparticles (SMPs) and nanoparticles (NPs) presence in food is attributable to increasing pollution from the environment in raw materials and finished products. In the present study, a multifaceted analytical strategy based on Environmental Scanning Electron Microscopy and High-Angle Annular Dark-Field-Scanning Transmission Electron Microscopy coupled with Energy-Dispersive X-ray Spectroscopy (ESEM-EDX, HAADF-STEM-EDX) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was proposed for the detection and characterization of metal and metal-containing SMPs and NPs in durum wheat samples, covering a size measurement range from 1 nm to multiple µm. ESEM-EDX and ICP-MS techniques were applied for the assessment of SMP and NP contamination on the surface of wheat grains collected from seven geographical areas characterized by different natural and anthropic conditions, namely Italy, the USA, Australia, Slovakia, Mexico, Austria, and Russia. ICP-MS showed significant differences among the mean concentration levels of metals, with the USA and Italy having the highest level. ESEM-EDX analysis confirmed ICP-MS concentration measurements and measured the highest presence of particles < 0.8 µm in size in samples from Italy, followed by the USA. Less marked differences were observed when particles < 0.15 µm were considered. HAADF-STEM-EDX was applied to a selected number of samples for a preliminary assessment of internal contamination by metal SMPs and NPs, and to expand the measurable particle size range. The multifaceted approach provided similar results for Fe-containing SMPs and NPs. ICP-MS and ESEM-EDX also highlighted the presence of a significant abundance of Ti- and Al-containing particles, while for STEM-EDX, sample preparation artifacts complicated the interpretation. Finally, HAADF-STEM-EDX results provided relevant information about particles in the low nm range, since, by applying this technique, no particles smaller than 50 nm were observed in accordance with ESEM-EDX.

The Aggregation and Dissolution of Citrate-Coated AgNPs in High Ammonia Nitrogen Wastewater and Sludge from UASB-Anammox Reactor

Silver nanoparticles (AgNPs) are released into the sewage pipes and ultimately wastewater treatment plants during manufacturing, use, and end-life disposal. AgNPs in wastewater treatment plants aggregate or dissolve, and may affect the microbial community and subsequent pollutant removal efficiency. This study aims to quantitatively investigate the fate of AgNPs in synthetic high ammonia nitrogen wastewater (SW) and sludge from an up-flow anaerobic sludge blanket (UASB) anammox reactor using a nanoparticle tracking analysis (NTA), dynamic light scattering (DLS), transmission electron microscope (TEM), and atomic absorption spectroscopy (AAS). Results showed that 18.1 mM NH4+, 2.11 mM Mg2+ in SW caused less negative zeta potential (ζ-potential, -18.4 vs. -37.4 mV), aggregation (388.8 vs. 21.5 nm), and settlement (80%) of citrate-coated AgNPs (cit-AgNPs) in 220 min. The presence of 18.5 mM Cl- in SW formed AgCl2-, AgCl(aq) and eventually promoted the dissolution (9.3%) of cit-AgNPs. Further exposure of SW-diluted AgNPs to sludge (42 mg L-1 humic acid) and induced a more negative ζ-potential (-22.2 vs. -18.4 mV) and smaller aggregates (313.4 vs. 388.8 nm) due to the steric and hindrance effect. The promoted Ag dissolution (34.4% vs. 9.3%) was also observed after the addition of sludge and the possible reason may be the production of Ag(NH3)2+ by the coexistence of HA from sludge and NH4+ from SW. These findings on the fate of AgNPs can be used to explain why AgNPs had limited effects on the sludge-retained bacteria which are responsible for the anammox process.

Effect of size and surface chemistry of gold nanoparticles on their retention in a sediment-water system and Lumbriculus variegatus

With the increased production, usage, and disposal of engineered nanoparticles (ENPs), there is growing concern over the fate of ENPs in the environment, their potential bioavailability and ecotoxicity. It is assumed that bioavailability and uptake into organisms depend on the environmental conditions as well as the physicochemical properties of ENPs, such as particle size or surface coating. A major sink for nanoparticles is expected to be sediments due to sorption and agglomeration processes. Accordingly, this study, investigated how different sizes (5 and 30 nm) and surface coatings of three different AuENPs based on citrate (AuCIT), mercaptoundecanoic acid (AuMUDA), and bovine serum albumin (AuBSA) affected the retention of ENPs in a sediment-water system and subsequent uptake into sediment-dwelling organism Lumbriculus variegatus (L. variegatus). Surface charge was found to be one of the factors affecting retention of the AuENPs in the sediment-water system. More negatively charged AuENPs had a higher mass fraction in the supernatant after 24 h exposure. Furthermore, the stability of AuENPs in the supernatant depended more on their zeta potential than particle size (5 nm vs. 30 nm). The surface coating was found to play an important role in the uptake (after depuration) of Au in L. variegatus, that is, AuBSA > AuCIT > AuMUDA.

Human Health Risk Assessments and Characterization of Nanomaterials: Are We Ready for the Next (Active) Generations?

Driven by the concept of the 'four generations of nanomaterials', the current state of the knowledge on risk assessment of future generation is explored for active nanomaterials. Through case studies, we identify challenges and evaluate the preparedness of characterization methods, available risk assessment modeling tools, and analytical instrumentation for such future generation active nanomaterials with dynamic hybrid structures of biotic-abiotic and organic-inorganic combinations. Currently available risk assessment tools and analytical instrumentation were found to be lacking the risk preparedness and characterization readiness for active nanomaterials, respectively. Potential future developments in risk assessment modeling tools and analytical techniques can be based upon this work which shall ensure long-term safety of the next generation of nanomaterials.

A Sensitive Single Particle-ICP-MS Method for CeO2 Nanoparticles Analysis in Soil during Aging Process

The increasing prevalence of products that incorporate engineered nanoparticles (ENPs) has prompted efforts to investigate the potential release, environmental fate, and exposure of the ENPs. However, the investigation of cerium dioxide nanoparticles (CeO₂ NPs) in soil has remained limited, owing to the analytical challenge from the soil's complex nature. In this study, this challenge was overcome by applying a novel single particle-inductively coupled plasma-mass spectrometry (SP-ICP-MS) methodology to detect CeO₂ NPs extracted from soil, utilizing tetrasodium pyrophosphate (TSPP) aqueous solution as an extractant. This method is highly sensitive for determining CeO₂ NPs in soil, with detection limits of size and concentration of 15 nm and 194 NPs mL^-1, respectively. Extraction efficiency was sufficient in the tested TSPP concentration range from 1 mM to 10 mM at a soil-to-extractant ratio 1:100 (g mL^-1) for the extraction of CeO₂ NPs from the soil spiked with CeO₂ NPs. The aging study demonstrated that particle size, size distribution, and particle concentration underwent no significant change in the aged soils for a short period of one month. This study showed an efficient method capable of extracting and accurately determining CeO₂ NPs in soil matrices. The method can serve as a useful tool for nanoparticle analysis in routine soil tests and soil research.

Cumulative effects of titanium dioxide nanoparticles in UASB process during wastewater treatment

Titanium dioxide nanoparticles (TiO₂ NPs) are widely used in consumer products and one of their major fate is the wastewater treatment plants. However, NPs eventually arrive to aquatic and terrestrial ecosystems via treated water and biosolids, respectively. Since low concentration of NPs is accumulating in the upflow anaerobic sludge blanket (UASB) reactors that treat wastewater and reclaim water quality, the accumulation of TiO₂ NPs in these reactors may impact in their performance. In this work, the long-term effects of TiO₂ NPs on the main benefits of treating wastewater by UASB reactors such as, biogas production, methane fraction in biogas and organic matter removal were evaluated. Evaluation consisted of monitoring such parameters in two identical UASB reactors, one UASB-Control (without NPs) and the experimental one (UASB-TiO₂ NPs) that received wastewater with TiO₂ NPs. The fate of NPs in the UASB reactor was also determined. Results indicated that biogas production increased by 8.8% due to the chronic exposure of UASB reactor to TiO₂ NPs during the first 44 days of experiment. However, the methane content in the biogas had no significant differences between both UASB, ranging between 78% and 90% of methane during the experiment. The removal of organic matter in both UASB was similar and ranged 92-98% along the experimental time. This means that accumulation of TiO₂ NPs did not altered the biogas production and organic matter removal. However, the content of total volatile solids (TVS) in UASB-TiO₂ NPs dropped off from 137.8 g to 64.2 g in 84 days, while for control reactor that decreased from 141.6 g to 92.4 g in the same period. Hence, the increased biogas production in the UASB exposed to TiO₂ was attributed to hydrolysis of the TVS in this reactor. The main fate of TiO₂ NPs was the granular sludge, which accumulated up to 8.56 mg Ti/g, which represent around 99% of the Ti spiked to the reactor and the possible cause of the biomass hydrolyzation in the UASB. Disposal of UASB sludge containing NPs from may raise ecotoxicological concerns due to the use of biosolids in agricultural activities.

Metal-Organic Framework Nanoparticles Induce Pyroptosis in Cells Controlled by the Extracellular pH

Ion homeostasis is essential for cellular survival, and elevated concentrations of specific ions are used to start distinct forms of programmed cell death. However, investigating the influence of certain ions on cells in a controlled way has been hampered due to the tight regulation of ion import by cells. Here, it is shown that lipid-coated iron-based metal-organic framework nanoparticles are able to deliver and release high amounts of iron ions into cells. While high concentrations of iron often trigger ferroptosis, here, the released iron induces pyroptosis, a form of cell death involving the immune system. The iron release occurs only in slightly acidic extracellular environments restricting cell death to cells in acidic microenvironments and allowing for external control. The release mechanism is based on endocytosis facilitated by the lipid-coating followed by degradation of the nanoparticle in the lysosome via cysteine-mediated reduction, which is enhanced in slightly acidic extracellular environment. Thus, a new functionality of hybrid nanoparticles is demonstrated, which uses their nanoarchitecture to facilitate controlled ion delivery into cells. Based on the selectivity for acidic microenvironments, the described nanoparticles may also be used for immunotherapy: the nanoparticles may directly affect the primary tumor and the induced pyroptosis activates the immune system.

Nanoparticle Characterization: What to Measure?

What to measure? is a key question in nanoscience, and it is not straightforward to address as different physicochemical properties define a nanoparticle sample. Most prominent among these properties are size, shape, surface charge, and porosity. Today researchers have an unprecedented variety of measurement techniques at their disposal to assign precise numerical values to those parameters. However, methods based on different physical principles probe different aspects, not only of the particles themselves, but also of their preparation history and their environment at the time of measurement. Understanding these connections can be of great value for interpreting characterization results and ultimately controlling the nanoparticle structure-function relationship. Here, the current techniques that enable the precise measurement of these fundamental nanoparticle properties are presented and their practical advantages and disadvantages are discussed. Some recommendations of how the physicochemical parameters of nanoparticles should be investigated and how to fully characterize these properties in different environments according to the intended nanoparticle use are proposed. The intention is to improve comparability of nanoparticle properties and performance to ensure the successful transfer of scientific knowledge to industrial real-world applications.

Legal and practical challenges in classifying nanomaterials according to regulatory definitions

The European Union (EU) has adopted nano-specific provisions for cosmetics, food and biocides, among others, which include binding definitions of the term "nanomaterial". Here we take an interdisciplinary approach to analyse the respective definitions from a legal and practical perspective. Our assessment reveals that the definitions contain several ill-defined terms such as "insoluble" or "characteristic properties" and/or are missing thresholds. Furthermore, the definitions pose major and so far unsolved analytical challenges that, in practice, make it nearly impossible to classify nanomaterials according to EU regulatory requirements. An important purpose of the regulations, the protection of human health and the environment, may remain unfulfilled and the development of innovative applications of nanomaterials may be facing a path full of (legal) uncertainties. Based on our findings, we provide five recommendations for a more coherent and practical approach towards the regulation of nanomaterials.

Application of nanoparticle tracking analysis for characterising the fate of engineered nanoparticles in sediment-water systems

Novel applications of nanotechnology may lead to the release of engineered nanoparticles (ENPs), which result in concerns over their potential environmental hazardous impact. It is essential for the research workers to be able to quantitatively characterise ENPs in the environment and subsequently to assist the risk assessment of the ENPs. This study hence explored the application of nanoparticle tracking system (NTA) to quantitatively describe the behaviour of the ENPs in natural sediment-water systems. The NTA allows the measurement of both particle number concentration (PNC) and particle size distribution (PSD) of the ENPs. The developed NTA method was applied to a range of gold and magnetite ENPs with a selection of surface properties. The results showed that the positively-charged ENPs interacted more strongly with the sediment than neutral and negatively-charged ENPs. It was also found that the citrate coated Au ENPs had a higher distribution percentage (53%) than 11-mercaptoundecanoic acid coated Au ENPs (20%) and citrate coated magnetite ENPs (21%). The principles of the electrostatic interactions between hard (and soft) acids and bases (HSAB) are used to explain such behaviours; the hard base coating (i.e. citrate ions) will interact more strongly with hard acid (i.e. magnetite) than soft acid (i.e. gold). The results indicate that NTA is a complementary method to existing approaches to characterise the fate and behaviour of ENPs in natural sediment.

Nanomaterials in Food Products: A New Analytical Challenge

This chapter focuses on the problem of detecting, characterizing, and determining the concentration of nanomaterials in foods and other biological matrices. After providing an overview of the unique challenges associated with nanoparticle metrology in complex media, sample pretreatment methods (including extraction, digestion, and inline chromatographic separation), imaging analysis, and nanomaterial quantification methods are presented in detail. The chapter also addresses numerous methods under development, including atmospheric scanning electron microscopy, single-particle inductively coupled plasma mass spectrometry, immunological detection methods, and optical techniques such surface plasmon resonance. The chapter concludes with an overview of the research needs in this area.

Cerium oxide nanoparticles induce oxidative stress in the sediment-dwelling amphipod Corophium volutator

Cerium oxide nanoparticles (CeO2 NPs) exhibit fast valence exchange between Ce(IV) and Ce(III) associated with oxygen storage and both pro and antioxidant activities have been reported in laboratory models. The reactivity of CeO2 NPs once they are released into the aquatic environment is virtually unknown, but this is important to determine for assessing their environmental risk. Here, we show that amphipods (Corophium volutator) grown in marine sediments containing CeO2 NPs showed a significant increase in oxidative damage compared to those grown in sediments without NPs and those containing large-sized (bulk) CeO2 particles. There was no exposure effect on survival, but significant increases in single-strand DNA breaks, lipid peroxidation and superoxide dismutase activity were observed after a 10-day exposure to 12.5 mg L(-1) CeO2. Characterisation of the CeO2 NPs dispersed in deionised or saline exposure waters revealed that more radicals were produced by CeO2 NPs compared with bulk CeO2. Electron energy loss spectroscopy (EELS) analysis revealed that both CeO2 NPs were predominantly Ce(III) in saline waters compared to deionised waters where they were predominantly Ce(IV). In both types of medium, the bulk CeO2 consisted mainly of Ce(IV). These results support a model whereby redox cycling of CeO2 NPs between Ce(III) and Ce(IV) is enhanced in saline waters, leading to sublethal oxidative damage to tissues in our test organism.

Nanomaterials in consumer products: a challenging analytical problem

Many products used in everyday life are made with the assistance of nanotechnologies. Cosmetic, pharmaceuticals, sunscreen, powdered food are only few examples of end products containing nano-sized particles (NPs), generally added to improve the product quality. To evaluate correctly benefits vs. risks of engineered nanomaterials and consequently to legislate in favor of consumer's protection, it is necessary to know the hazards connected with the exposure levels. This information implies transversal studies and a number of different competences. On analytical point of view the identification, quantification and characterization of NPs in food matrices and in cosmetic or personal care products pose significant challenges, because NPs are usually present at low concentration levels and the matrices, in which they are dispersed, are complexes and often incompatible with analytical instruments that would be required for their detection and characterization. This paper focused on some analytical techniques suitable for the detection, characterization and quantification of NPs in food and cosmetics products, reports their recent application in characterizing specific metal and metal-oxide NPs in these two important industrial and market sectors. The need of a characterization of the NPs as much as possible complete, matching complementary information about different metrics, possible achieved through validate procedures, is what clearly emerges from this research. More work should be done to produce standardized materials and to set-up methodologies to determine number-based size distributions and to get quantitative date about the NPs in such a complex matrices.

Characterization of engineered TiO₂ nanomaterials in a life cycle and risk assessments perspective

For the last 10 years, engineered nanomaterials (ENMs) have raised interest to industrials due to their properties. They are present in a large variety of products from cosmetics to building materials through food additives, and their value on the market was estimated to reach $3 trillion in 2014 (Technology Strategy Board 2009). TiO2 NMs represent the second most important part of ENMs production worldwide (550-5500 t/year). However, a gap of knowledge remains regarding the fate and the effects of these, and consequently, impact and risk assessments are challenging. This is due to difficulties in not only characterizing NMs but also in selecting the NM properties which could contribute most to ecotoxicity and human toxicity. Characterizing NMs should thus rely on various analytical techniques in order to evaluate several properties and to crosscheck the results. The aims of this review are to understand the fate and effects of TiO2 NMs in water, sediment, and soil and to determine which of their properties need to be characterized, to assess the analytical techniques available for their characterization, and to discuss the integration of specific properties in the Life Cycle Assessment and Risk Assessment calculations. This study underlines the need to take into account nano-specific properties in the modeling of their fate and effects. Among them, crystallinity, size, aggregation state, surface area, and particle number are most significant. This highlights the need for adapting ecotoxicological studies to NP-specific properties via new methods of measurement and new metrics for ecotoxicity thresholds.

A uniform measurement expression for cross method comparison of nanoparticle aggregate size distributions

Measurement methods produce incomparable results when applied to aggregated nanoparticles.

Contributed review: Review of integrated correlative light and electron microscopy

New developments in the field of microscopy enable to acquire increasing amounts of information from large sample areas and at an increased resolution. Depending on the nature of the technique, the information may reveal morphological, structural, chemical, and still other sample characteristics. In research fields, such as cell biology and materials science, there is an increasing demand to correlate these individual levels of information and in this way to obtain a better understanding of sample preparation and specific sample properties. To address this need, integrated systems were developed that combine nanometer resolution electron microscopes with optical microscopes, which produce chemically or label specific information through spectroscopy. The complementary information from electron microscopy and light microscopy presents an opportunity to investigate a broad range of sample properties in a correlated fashion. An important part of correlating the differences in information lies in bridging the different resolution and image contrast features. The trend to analyse samples using multiple correlated microscopes has resulted in a new research field. Current research is focused, for instance, on (a) the investigation of samples with nanometer scale distribution of inorganic and organic materials, (b) live cell analysis combined with electron microscopy, and (c) in situ spectroscopic and electron microscopy analysis of catalytic materials, but more areas will benefit from integrated correlative microscopy.

Measurement Methods to Detect, Characterize, and Quantify Engineered Nanomaterials in Foods

This article is one of a series of 4 that reports on a task of the NanoRelease Food Additive project of the International Life Science Institute Center for Risk Science Innovation and Application to identify, evaluate, and develop methods that are needed to confidently detect, characterize, and quantify intentionally produced engineered nanomaterials (ENMs) released from food along the alimentary tract. This particular article focuses on the problem of detecting ENMs in food, paying special attention to matrix interferences and how to deal with them. In this review, an in-depth analysis of the literature related to detection of ENMs in complex matrices is presented. The literature review includes discussions of sampling methods, such as centrifugation and ENM extraction. Available analytical methods, as well as emerging methods, are also presented. The article concludes with a summary of findings and an overview of potential knowledge gaps and targets for method development in this area.