Contact X-ray microscopy of living cells by using LiF crystal as imaging detector

Nanometer-Resolution Imaging of Living Cells Using Soft X-ray Contact Microscopy

Soft X-ray microscopy is a powerful technique for imaging cells with nanometer resolution in their native state without chemical fixation, staining, or sectioning. The studies performed in several laboratories have demonstrated the potential of applying this technique for imaging the internal structures of intact cells. However, it is currently used mainly on synchrotrons with restricted access. Moreover, the operation of these instruments and the associated sample-preparation protocols require interdisciplinary and highly specialized personnel, limiting their wide application in practice. This is why soft X-ray microscopy is not commonly used in biological laboratories as an imaging tool. Thus, a laboratory-based and user-friendly soft X-ray contact microscope would facilitate the work of biologists. A compact, desk-top laboratory setup for soft X-ray contact microscopy (SXCM) based on a laser-plasma soft X-ray source, which can be used in any biological laboratory, together with several applications for biological imaging, are described. Moreover, the perspectives of the correlation of SXCM with other super-resolution imaging techniques based on the current literature are discussed.

Adhesion of Triple-Negative Breast Cancer Cells under Fluorescent and Soft X-ray Contact Microscopy

Understanding cancer cell adhesion could help to diminish tumor progression and metastasis. Adhesion mechanisms are currently the main therapeutic target of TNBC-resistant cells. This work shows the distribution and size of adhesive complexes determined with a common fluorescence microscopy technique and soft X-ray contact microscopy (SXCM). The results presented here demonstrate the potential of applying SXCM for imaging cell protrusions with high resolution when the cells are still alive in a physiological buffer. The possibility to observe the internal components of cells at a pristine and hydrated state with nanometer resolution distinguishes SXCM from the other more commonly used techniques for cell imaging. Thus, SXCM can be a promising technique for investigating the adhesion and organization of the actin cytoskeleton in cancer cells.

Imaging of Cell Structures Using Optimized Soft X-ray Contact Microscopy

This work is to study the relationship between the exposure conditions and the quality of cell imaging with soft X-ray contact microscopy (SXCM). It is a crucial step in the efficient visualization of cell structures. Three different human cell lines: DU145 prostate carcinoma cells, HCC38 breast cancer cells, and Poietics mesenchymal stem cells were used to establish the optimal exposure conditions in SXCM. The image quality depended on the soft X-ray (SXR) absorbed energy and photoresist development conditions. At lower SXR energy (200 or 400 SXR pulses), sharp cell edges, membrane projections, and cell–cell connections were visible. In contrast, higher energy (600 or 800 SXR pulses) allowed observation of the cytoskeleton and the nucleus in a cell type-dependent manner (the influence of cell thickness and internal complexity was noted).

Chemical Dosimetry in the "Water Window": Ferric Ions and Hydroxyl Radicals Produced by Intense Soft X Rays

A standard Fricke dosimeter was used to measure the absorbed dose via the oxidation yields of Fe³⁺ ions in an aqueous environment induced by soft X rays within the "water window" spectral range. We also exploited the property of a neutral solution containing terephthalic acid as a tool for selective detection of OH radicals. Both dosimetric systems were irradiated using the experimental pulsed laser-plasma soft X-ray source as well as conventional 1.25-MeV gamma rays. Radiation chemical yields of Fe³⁺ ions and OH radicals were determined to be (5.13 ± 0.94) × 10^-1 µmol·J^-1 (4.95 ± 0.91 100eV^-1) and (2.33 ± 0.35) × 10^-2 µmol·J^-1 (0.23 ± 0.03 100eV^-1), respectively. Measurements were supported by Monte Carlo simulations to estimate the linear energy transfer of the water window radiation. The simulation results are in good agreement with expected linear energy transfer of ions inducing the same Fe³⁺ ion and OH radical radiation chemical yield.

Evolution of the Internal Structure of Short-Period Cr/V Multilayers with Different Vanadium Layers Thicknesses

Cr/V multilayer mirrors are suitable for applications in the "water window" spectral ranges. To study factors influencing the internal microstructure of Cr/V multilayers, multilayers with different vanadium layers thicknesses varying from 0.6 nm to 4.0 nm, and a fixed thickness (1.3 nm) of chromium layers, were fabricated and characterized with a set of experimental techniques. The average interface width characterizing a cumulative effect of different structure irregularities was demonstrated to exhibit non-monotonous dependence on the V layer thickness and achieve a minimal value of 0.31 nm when the thickness of the V layers was 1.2 nm. The discontinuous growth of very thin V films increased in roughness as the thickness of V layers decreased. The columnar growth of the polycrystalline grains in both materials became more pronounced with increasing thickness, resulting in a continuous increase in the interface width to a maximum of 0.9 nm for a 4 nm thickness of the V layer.

Sustainable pollutant removal by periphytic biofilm via microbial composition shifts induced by uneven distribution of CeO2 nanoparticles

The responses of periphytic biofilm to CeO₂ nanoparticle (CNP) exposure were explored by investigating community shifts and pollutant removal. Results showed that CNPs entered the sensitive microbial cells in the periphytic biofilm, leading to cytomembrane damage and intracellular reactive oxygen species (ROS) generation. The periphytic biofilm communities were, however, able to adapt to the prolonged exposure and maintain their pollutant removal (i.e., phosphorus, nitrogen and copper, organic matter) performance. Observations under synchrotron radiation scanning transmission X-ray microscopy revealed that fewer CNPs were distributed in algal cells compared to bacterial cells, wherein the transformation between Ce(IV) and Ce(III) occurred. High-throughput sequencing further showed that the proportion of algae, such as Leptolyngbya and Nostoc, significantly increased in the periphytic biofilm exposed to CNPs while the proportion of bacteria, such as Bacilli and Gemmatimonadetes, decreased. This change in community composition might be the primary reason for the sustained pollutant removal performance of the periphytic biofilm.

Comparison of bone regeneration in alveolar bone of dogs on mineralized collagen grafts with two composition ratios of nano-hydroxyapatite and collagen

To study the effect of two composition ratios of nano-hydroxyapatite and collagen (NHAC) composites on repairing alveolar bone defect of dogs. Eighteen healthy adult dogs were randomly divided into three groups. Two kinds of the NHAC composites were prepared according to the constituent ratios of 3:7 and 5:5; immediately after extraction of the mandibular second premolars, each kind of the NHAC composite was implanted into extraction socket, respectively: Group I, nHA/Col = 3:7; Group II, nHA/Col = 5:5 and Group III, blank control group. The bone-repairing ability of the two grafts was separately analyzed by morphometric measurement, X-ray tomography examination and biomechanical analysis at 1st, 3rd and 6th month post-surgical, respectively. The NHAC composites were absorbed gradually after implanting into alveolar bone defect and were replaced by new bone. The ratios of new bone formation of Group I was significantly higher than that of Group II after 3 months (P < 0.05). The structure and bioactive performance can be improved when the ratio between the collagen and the hydroxyapatite was reasonable, and the repairing ability and effect in extraction sockets are obviously better.