Does 3D orientation account for variation in osteon morphology assessed by 2D histology?

Age-dependent change and intraskeletal variability in secondary osteons of elderly Australians

There is a need to fully understand intra-skeletal variability within different populations to develop and improve age-at-death estimation methods. This study evaluates age-related histomorphometric changes in three different bones intra-individually in a modern Australian sample. Four female and 13 male elderly Australian adult donors (67-93 years) were examined for osteon population density (OPD), osteon area (On.Ar), and Haversian canal area (H.Ar) of secondary osteons to compare between femora, ribs, and humeri and assess against age. In the pooled sex sample, no statistically significant correlations were observed between age and each histological variable. In the males, OPD of the femur increased significantly with age, as did porosity in the rib. In the male humeri, OPD increased moderately with age, while H.Ar was decreased moderately with age. Intra-bone comparisons showed that males had significantly higher osteon counts in their ribs compared to their femora, while their ribs showed statistically significantly less porosity than their humeri. When bone size was accounted for, by adjusting the femur and humerus histology data by robusticity indices, histology values were found to be similar between bones within the same individual. This is despite the upper and lower limbs receiving different ranges and types of biomechanical load. Our findings demonstrate that bone size influences histomorphometry, and this could confound age-at-death estimations that have not been adjusted for robusticity. Future studies would benefit from examining bone histomorphometry within a larger sample size and incorporating bone robusticity measures into histology analyses.

Understanding basic multicellular unit activity in cortical bone through 3D morphological analysis: New methods to define zones of the remodeling space

The activity of basic multicellular units (BMU) in cortical bone is classically described as a sequential order of events- resorption, reversal and formation. This simplified portrayal of the remodeling process is pervasive despite the reported variability in remodeling space morphology. These variations may reflect meaningful nuances in BMU activity but methods to quantify 3D remodeling space morphology within the context of the cellular activity are currently lacking. This study developed new techniques to define zones of BMU activity based on the 3D morphology of remodeling spaces in rabbit cortical bone and integrated morphological data with the BMU longitudinal erosion rate (LER) to elucidate the spatial-temporal coordination of BMUs and estimate mineral apposition rate (MAR). The tibiae of New Zealand white rabbits (n = 5) were imaged in vivo using synchrotron radiation and two weeks later ex vivo with desktop microCT. The in vivo and ex vivo datasets were co-registered, and 27 remodeling spaces were identified at both timepoints. A radial profile representing the 3D morphology was the platform for partitioning the remodeling spaces into resorption, reversal and formation zones. Manual, automated and semi-automated partitioning approaches were compared, and the zone-segmentations were used to calculate the length, change in radius and slope of each zone. The manual approach most accurately defined the zones of idealized remodeling spaces with known dimensions (relative error = 0.9-9.2 %) while the semi-automated method reliably defined the zones in rabbit remodeling spaces (ICC = 0.85-1.00). Combining LER and the manually derived zone dimensions indicated that a BMU passes through a cross-section in approximately 18.8 days with resorption, reversal and formation taking 4.1, 2.2, and 12.5 days, respectively. MAR estimated by the 3D analysis was not significantly different than that determined with classic histomorphometry (p = 0.48). These techniques have the potential to assess dynamic parameters of bone resorption and formation, eliminate the need for fluorochrome labeling and provide a more comprehensive perspective of the remodeling process.

Multiscale theoretical model shows that aging-related mechanical degradation of cortical bone is driven by microstructural changes in addition to porosity

This study aims to gain mechanistic understanding of how aging-related changes in the microstructure of cortical bone drive mechanical consequences at the macroscale. To that end, cortical bone was modeled as a bundle of elastic-plastic, parallel fibers, which represented osteons and interstitial tissue, loaded in uniaxial tension. Distinct material properties were assigned to each fiber in either the osteon or interstitial fiber "families." Models representative of mature (20-60 yrs.) bone, and elderly (60+) bone were created by modeling aging via the following changes to the input parameters: (i) increasing porosity from 5% to 15%, (ii) increasing the ratio of the number of osteon fibers relative to interstitial fibers from 40% to 50%, and (iii) changing the fiber material properties from representing mature bone samples to representing elderly bone samples (i.e., increased strength and decreased toughness of interstitial fibers together with decreased toughness of osteon fibers). To understand the respective contributions of these changes, additional models isolating one or two of each of these were also created. From the computed stress-strain curve for the fiber bundle, the yield point (ϵy, σy), ultimate point (ϵu, σu), and toughness (UT) for the bundle as a whole were measured. We found that changes to all three input parameters were required for the model to capture the aging-related decline in cortical bone mechanical properties consistent with those previously reported in the literature. In both mature and elderly bundles, rupture of the interstitial fibers drove the initial loss of strength following the ultimate point. Plasticity and more gradual rupture of the osteons drove the remainder of the response. Both the onset and completion of interstitial fiber rupture occurred at lower strains in the elderly vs. mature case. These findings point to the importance of studying microstructural changes beyond porosity, such as the area fraction of osteons and the material properties of osteon and interstitial tissue, in order to further understanding of aging-related changes in bone.

Closing cones create conical lamellae in secondary osteonal bone

Lamellae are sheets of mineralized collagen 1-20 µm thick, extending over hundreds of µm in bone tissue, occupying bone's structural hierarchy at a level above collagen fibres and osteocytes, and below osteons and trabeculae. Osteons are tubular arrangements of lamellae surrounding central neurovascular canals. Lamellae in osteons are usually described as concentric cylinders based on their annular appearance in transverse section. In this review, I provide a perspective on current understanding of the relationship between geometry of the bone formation front and the shape of lamellae produced at it, reaching the conclusion that the 'closing cone' bone formation front in secondary osteonal remodelling must necessarily result in cone-shaped lamellae in the mature secondary osteon. Secondary osteons replace primary osteons through a tunnelling process of bone turnover, meaning that conical lamellae may become more common in older and damaged bone which is at greatest risk of fracture. Visualization and measurement of three-dimensional lamellar shape over hundreds of microns is needed to provide data for accurate micromechanical simulations. Treating secondary osteonal lamellae as a 'stack of cones' rather than 'nested cylinders' may have important implications for our appreciation of bone's function as a load-bearing tissue and of its behaviour in fracture.

Revealing Intraosseous Blood Flow in the Human Tibia With Ultrasound

Intraosseous blood circulation is thought to have a critical role in bone growth and remodeling, fracture healing, and bone disorders. However, it is rarely considered in clinical practice because of the absence of a suitable noninvasive in vivo measurement technique. In this work, we assessed blood perfusion in tibial cortical bone simultaneously with blood flow in the superficial femoral artery with ultrasound imaging in five healthy volunteers. After suppression of stationary signal with singular‐value‐decomposition, pulsatile blood flow in cortical bone tissue is revealed, following the heart rate measured in the femoral artery. Using a method combining transverse oscillations and phase‐based motion estimation, 2D vector flow was obtained in the cortex of the tibia. After spatial averaging over the cortex, the peak blood velocity along the long axis of the tibia was measured at four times larger than the peak blood velocity across the bone cortex. This suggests that blood flow in central (Haversian) canals is larger than in perforating (Volkmann's) canals, as expected from the intracortical vascular organization in humans. The peak blood velocity indicates a flow from the endosteum to the periosteum and from the heart to the foot for all subjects. Because aging and the development of bone disorders are thought to modify the direction and velocity of intracortical blood flow, their quantification is crucial. This work reports for the first time an in vivo quantification of the direction and velocity of blood flow in human cortical bone. © 2021 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Asymmetric midshaft femur remodeling in an adult male with left sided hip joint ankylosis, Metal Period Nagsabaran, Philippines

OBJECTIVE

This study investigated microstructural changes of the right and left midshaft femur in an archaeological individual afflicted with left-sided hip joint ankylosis to assess whether increased cortical porosity was present as a result of leg disuse.

MATERIALS

The individual is a middle-aged adult male excavated from the Metal Period (∼2000 BP) Nagsabaran, Luzon Island, Philippines.

METHODS

Following standard examination of femur gross anatomy and differential diagnosis of the hip joint fusion, ∼1 cm thick posterior midshaft femur samples were removed for microstructural examination. Using static histomorphometry, bone multi-cellular unit activity from Haversian canal (vascular pore) density, area, and circularity was reconstructed. Spatial positioning of Haversian canals was mapped using Geographic Information Systems software. Phosphate, carbonate, and carbonate:phosphate ratios were obtained using synchrotron-sourced Fourier transform infrared microspectroscopy.

RESULTS

The left femur had greater cortical pore density, with smaller and rounder vascular canals, in addition to lower matrix levels of phosphate and carbonate, when compared to the right femur.

CONCLUSIONS

Our data indicate compromised bone tissue in the left femur, and conform to expected bone functional adaptation paradigms of remodeling responses to pathological and biomechanical changes.

SIGNIFICANCE

The preservation of this individual's hip abnormality created a unique opportunity to evaluate intra-skeletal bone health asymmetry, which may help other researchers evaluate the presence of limb disuse in archaeological samples.

LIMITATIONS

A lack of lower limb data limits our interpretations to femur remodeling only.

SUGGESTIONS FOR FURTHER RESEARCH

Future research efforts should aim to examine the presence of remodeling changes in all bones of the lower limb.

LAYUNIN

Gamit ang buto ng magkabilang pemur ng isang taong natagpuan sa isang archaeological site na may sakit na ankylosis sa kaliwang balakang, pinag-aralan ang iba't-ibang microstructures galing sa gitnang bahagi o midshaft ng pemur upang malaman kung may makikitang mataas na cortical porosity ang buto dahil hindi ito malimit gamitin.

GAMIT

Ang pinag-aaralang buto ay galing sa isang indibidwal na tinatayang middle-age na lalaki na namuhay noong Panahon ng Metal (∼2000 BP) sa Nagsabaran, Cagayan, Republika ng Pilipinas.

PAMAMARAAN

Matapos ang unang pagkilatis sa femur at ang pagkilala ng sakit sa balakang, kumuha ng ∼1 sentimetro ng buto galing sa midshaft ng pemur upang lalong mapag-aralan ang kanyang microstructure. Gamit ang static histomorphometry, napag-aralan ang mga naiwang bakas ng multi-cellular unit activity ayon sa kapal, laki at pagkakabilog ng Haversian canal (vascular pore). Gumamit din ng Geographic Information Systems (GIS) software upang mapag-aralan ang kaugnayan ng posisyon ng Haversian canal. Panghuli, gumamit din ng synchroton-sourced Fourier transform infrared (sFTIR) microspectroscopy upang makuha ang bilang ng phosphate, carbonate, at carbonate:phosphate ratio.

RESULTA

Napag-alaman na ang kaliwang pemur ay mayroong higit na maraming cortical pores, maliit at mabilog na vascular canals, at mababang bilang ng phosphate, carbonate kung ihahambing sa kanang pemur.

KONKLUSYON

Ayon sa aming datos, ang kaliwang pemur ay umaayon sa mga katangian ng isang butong may sakit. Sumunod din ito sa inaasahang bone functional adaptation paradigms of remodeling ng buto dahil may sakit at hindi nagamit.

KAHALAGAHAN

Dahil maganda ang pagkakalibing ng buto ng balakang, nagkaroon ng pagkakataong makilatis ang kalusugan ng sinaunang-tao sa pamamagitan ng pag-aaral ng kalusugan ng buto. Dagdag pa, makakatulong din ito upang malaman kung ibang mananaliksik ang pag-aaral ng ibang butong hindi nagagamit mula sa archaeological site.

LIMITASYON

Dahil walang nakuhang ibang buto mula sa binti at paa, ang pemur lang ang naimbestigahan.

MUNGKAHI PARA SA MGA SUSUNOD NA PAG-AARAL

Kung magkakaroon ng pagkakataon sa susunod, dapat maimbistigahan ang lahat ng buto ng binti (lower limb).

Towards a 2D cortical osseous tissue representation and generation at micro scale. A computational model for bone simulations

BACKGROUND AND OBJECTIVE

the acquisition of microscopic images of human bones is a complex and expensive process. Moreover, the objective of obtaining a large data bank with microscopic images in order to carry out massive studies or to train automatic generation algorithms is not an option. Consequently, most of the current work focuses on the analysis of small regions captured by a microscope. The aim is the development of a tool to represent bone tissue at microscopic levels which is suitable for performing physical simulations, as well as for the diagnosis of various diseases. This work includes the whole process from the digitization of a human bone to the generation of bone tissue in a determined area of the bone selected through a cutting plane.

METHODS

based on the anatomy of the bone structure, the parameters that allow the representation of the bone tissue at mesoscale level have been analyzed. Although the models are randomly generated, they are based on statistical parameters. The model generator is based on the analysis of images of bone tissue and its parameters, performing a representation of each of its relevant structures in a way that fulfils these parameters.

RESULTS

the tool is useful for the virtual generation of bone tissue that satisfies the main characteristics of the cortical bone. The models obtained have been favorably evaluated in two stages. In the first stage, a scientific group has examined a set of images, in which images of the models generated were mixed with images obtained through traditional methods. Then, the physical characteristics of the generated tissue have been compared with the morphology of the bone tissue.

CONCLUSIONS

the model generator allows us to perform precise simulations in order to obtain realistic images with physical characteristics in accordance with reality. It is necessary to emphasize that even though the most relevant structures are included, the proposed model generator can be expanded to include new parameters or elements, so that it can be adapted to new needs. It could even break down randomness and parameterize it completely in order to allow the recreation of the tissue conditions of other studies.

Cortical Bone Porosity in Rabbit Models of Osteoporosis

Cortical bone porosity is intimately linked with remodeling, is of growing clinical interest, and is increasingly accessible by imaging. Thus, the potential of animal models of osteoporosis (OP) to provide a platform for studying how porosity develops and responds to interventions is tremendous. To date, rabbit models of OP have largely focused on trabecular microarchitecture or bone density; some such as ovariectomy (OVX) have uncertain efficacy and cortical porosity has not been extensively reported. Our primary objective was to characterize tibial cortical porosity in rabbit-based models of OP, including OVX, glucocorticoids (GC), and OVX + GC relative to controls (SHAM). We sought to: (i) test the hypothesis that intracortical remodeling is elevated in these models; (ii) contrast cortical remodeling and porosity in these models with that induced by parathyroid hormone (1-34; PTH); and (iii) contrast trabecular morphology in the proximal tibia across all groups. Evidence that an increase in cortical porosity occurred in all groups was observed, although this was the least robust for GC. Histomorphometric measures supported the hypothesis that remodeling rate was elevated in all groups and also revealed evidence of uncoupling of bone resorption and formation in the GC and OVX + GC groups. For trabecular bone, a pattern of loss was observed for OVX, GC, and OVX + GC groups, whereas the opposite was observed for PTH. Change in trabecular number best explained these patterns. Taken together, the findings indicated rabbit models provide a viable and varied platform for the study of OP and associated changes in cortical remodeling and porosity. Intriguingly, the evidence revealed differing effects on the cortical and trabecular envelopes for the PTH model. © 2020 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR)..

Quantifying intracortical bone microstructure: A critical appraisal of 2D and 3D approaches for assessing vascular canals and osteocyte lacunae

Describing and quantifying vascular canal orientation and volume of osteocyte lacunae in bone is important in studies of bone growth, mechanics, health and disease. It is also an important element in analysing fossil bone in palaeohistology, key to understanding the growth, life and death of extinct animals. Often, bone microstructure is studied using two-dimensional (2D) sections, and three-dimensional (3D) shape and orientation of structures are estimated by modelling the structures using idealised geometries based on information from their cross sections. However, these methods rely on structures meeting strict geometric assumptions. Recently, 3D methods have been proposed which could provide a more accurate and robust approach to bone histology, but these have not been tested in direct comparison with their 2D counterparts in terms of accuracy and sensitivity to deviations from model assumptions. We compared 2D and 3D methodologies for estimating key microstructural traits using a combination of experimental and idealised test data sets. We generated populations of cylinders (canals) and ellipsoids (osteocyte lacunae), varying the cross-sectional aspect ratios of cylinders and orientation of ellipsoids to test sensitivity to deviations from cylindricality and longitudinal orientation, respectively. Using published methods, based on 2D sections and 3D data sets, we estimated cylinder orientation and ellipsoid volume. We applied the same methods to six CT data sets of duck cortical bone, using the full volumes for 3D measurements and single CT slices to represent 2D sections. Using in silico test data sets that did deviate from ideal cylinders and ellipsoids resulted in inaccurate estimates of cylinder or canal orientation, and reduced accuracy in estimates of ellipsoid and lacunar volume. These results highlight the importance of using appropriate 3D imaging and quantitative methods for quantifying volume and orientation of 3D structures and offer approaches to significantly enhance our understanding of bone physiology based on accurate measures for bone microstructures.

Relationship between heavy metal accumulation and histological alterations in voles from alpine and forest habitats of the West Carpathians

The interaction between toxic heavy metals and bio-elements in internal organs and femoral bones and their potential impacts on bone structural properties and renal histopathological changes in bank voles and snow voles were investigated. Our results reveal that heavy metals Hg and Pb accumulate more in femoral bones of alpine habitats than forests. In snow voles, the parameters of the primary osteons' vascular canals (length, average perimeter and area) simultaneously decreased with an increase of Pb and Sr. Wider primary osteons' vascular canals of snow voles contained decreased levels of K, but increased Ba. In bank voles, the number of primary osteons increased in alpine habitats along with K, Hg, and Pb accumulation. In the kidneys of bank voles, rising levels of Rb, Hg, and Zn were detected in alpine habitats. Hg increases the most in kidney tissue from alpine habitats in both vole species, and Hg levels (mean value 0.25 μg/g, max. value 0.55 μg/g) in the renal tissues of bank voles from alpine localities are similar to Hg levels from Hg-polluted industrial areas in other studies. This reflects that alpine areas of the Tatra Mountains are highly contaminated with Hg. The intensity of renal hemosiderosis relates significantly to Zn, Fe, and Cu levels in snow voles, with Fe and Zn levels in bank voles from forest habitats, and with Rb in bank voles from alpine habitats. The intensity of tubule necrosis in renal tissues of bank voles from alpine habitats was negatively related to Se content. In bank voles from forest habitats, significant positive correlations were found between the intensity of glomerular hyperplasia and amounts of Zn. The interactions of the detected element's association with bone tissue and internal organs are discussed.

A Method to Interpolate Osteon Volume Designed for Histological Age Estimation Research

Aging adult skeletal material is a crucial component of building the biological profile of unknown skeletal remains, but many macro- and microscopic methods have challenges regarding accuracy, precision, and replicability. This study developed a volumetric method to visualize and quantify histological remodeling events in three dimensions, using a two-dimensional serialized approach that applied circular polarizing microscopy and geographic information systems protocols. This approach was designed as a tool to extend current histological aging methodologies. Three serial transverse sections were obtained from a human femoral midshaft. A total sample size of 6847 complete osteons from the three sections was identified; 1229 osteons connected between all sections. The volume of all connected osteons was interpolated using ArcGIS area calculations and truncated cone geometric functions. Each section was divided into octants, and two random samples of 100 and of 30 connected osteons from each octant were generated. Osteon volume was compared between the octants for each random sample using ANOVA. Results indicated that the medial aspect had relative uniformity in osteon volume, whereas the lateral aspect showed high variability. The anterolateral-lateral octant had significantly smaller osteon volume, whereas the posterior-posterolateral octant had significantly larger osteon volume. Results also indicated that a minimum of 100 osteons is statistically more robust and more representative of normal osteon distribution and volume; the use of 30 osteons is insufficient. This research has demonstrated that osteon volume can be interpolated using spatial geometry and GIS applications and may be a tool to incorporate into adult age-at-death estimation techniques.

3D micro structural analysis of human cortical bone in paired femoral diaphysis, femoral neck and radial diaphysis

Human bone is known to adapt to its mechanical environment in a living body. Both its architecture and microstructure may differ between weight-bearing and non-weight-bearing bones. The aim of the current study was to analyze in three dimensions, the morphology of the multi-scale porosities on human cortical bone at different locations. Eight paired femoral diaphyses, femoral necks, and radial diaphyses were imaged using Synchrotron Radiation µCT with a 0.7 µm isotropic voxel size. The spatial resolution facilitates the investigation of the multiscale porosities of cortical bone, from the osteonal canals system down to the osteocyte lacunar system. Our results showed significant differences in the microstructural properties, regarding both osteonal canals and osteocytes lacunae, between the different anatomical locations. The radius presents significantly lower osteonal canal volume fraction and smaller osteonal canals than the femoral diaphysis or neck. Osteocytes lacunae observed in the radius are significantly different in shape than in the femur, and lacunar density is higher in the femoral neck. These results show that the radius, a non-weight-bearing bone, is significantly different in terms of its microstructure from a weight-bearing bone such as the femur. This implies that the cortical bone properties evaluated on the femoral diaphysis, the main location studied within the literature, cannot be generalized to other anatomical locations.

The effect of growth rate on the three-dimensional orientation of vascular canals in the cortical bone of broiler chickens

Vascular canals in cortical bone during growth and development typically show an anisotropic pattern with canals falling into three main categories: circumferential, radial, and longitudinal. Two major hypotheses attempt to explain the preferred orientations in bone: that vascular canal orientation is optimized to resist a predominant strain direction from functional loading, or that it reflects growth requirements and velocity. We use a controlled growth experiment in broiler chickens to investigate the effect of growth rate on vascular canal orientation. Using feed restriction we set up a fast growing control group and a slow growing restricted group. We compared the microstructure in the humerus and the femur at 42 days of age using synchrotron micro‐computed tomography (micro‐CT), a three‐dimensional (3D) method that visualizes the full canal network. We measured the 3D orientation of each canal in the whole cross‐section of the bone cortex using a set of custom imagej scripts. Using these orientations we compute laminar, radial, and longitudinal indices that measure the proportion of circumferential, radial, and longitudinal canals, by unit of length, in the cortex. Following previous studies we hypothesized that vascular canal orientation is related to growth, with radial canals linked to a faster growth rate and related to functional loading through a high laminar index in flight bones which reflects torsional loading resulting from active flight. The control group had final body weights that were nearly twice the final weights of the restricted group and higher absolute growth rates. We found consistent patterns in the comparison between the humerus and the femur in both groups, with the humerus having higher laminar and longitudinal indices, and a lower radial index than the femur. The control group had higher radial indices and lower laminar and longitudinal indices in both the humerus and the femur than the restricted group. The higher radial indices in our control group point to a link between radial canals and faster growth, and between laminar canals and slower growth, while the higher laminar indices in the humerus point to a link between circumferential canals and torsional loading. Overall, our results indicate that the orientation of the cortical canal network in a bone is the consequence of a complex interaction between the growth rate of that bone and functional loading environment.

Interpreting the three-dimensional orientation of vascular canals and cross-sectional geometry of cortical bone in birds and bats

Cortical bone porosity and specifically the orientation of vascular canals is an area of growing interest in biomedical research and comparative/paleontological anatomy. The potential to explain microstructural adaptation is of great interest. However, the determinants of the development of canal orientation remain unclear. Previous studies of birds have shown higher proportions of circumferential canals (called laminarity) in flight bones than in hindlimb bones, and interpreted this as a sign that circumferential canals are a feature for resistance to the torsional loading created by flight. We defined the laminarity index as the percentage of circumferential canal length out of the total canal length. In this study we examined the vascular canal network in the humerus and femur of a sample of 31 bird and 24 bat species using synchrotron micro-computed tomography (micro-CT) to look for a connection between canal orientation and functional loading. The use of micro-CT provides a full three-dimensional (3D) map of the vascular canal network and provides measurements of the 3D orientation of each canal in the whole cross-section of the bone cortex. We measured several cross-sectional geometric parameters and strength indices including principal and polar area moments of inertia, principal and polar section moduli, circularity, buckling ratio, and a weighted cortical thickness index. We found that bat cortices are relatively thicker and poorly vascularized, whereas those of birds are thinner and more highly vascularized, and that according to our cross-sectional geometric parameters, bird bones have a greater resistance to torsional stress than the bats; in particular, the humerus in birds is more adapted to resist torsional stresses than the femur. Our results show that birds have a significantly (P = 0.031) higher laminarity index than bats, with birds having a mean laminarity index of 0.183 in the humerus and 0.232 in the femur, and bats having a mean laminarity index of 0.118 in the humerus and 0.119 in the femur. Counter to our expectation, the birds had a significantly higher laminarity index in the femur than in the humerus (P = 0.035). To evaluate whether this discrepancy was a consequence of methodology we conducted a comparison between our 3D method and an analogue to two-dimensional (2D) histological measurements. This comparison revealed that 2D methods significantly underestimate (P < 0.001) the amount of longitudinal canals by an average of 20% and significantly overestimate (P < 0.001) the laminarity index by an average of 7.7%, systematically mis-estimating indices of vascular canal orientations. In comparison with our 3D results, our approximated 2D measurement had the same results for comparisons between the birds and bats but found significant differences only in the longitudinal index between the humerus and the femur for both groups. The differences between our 3D and pseudo-2D results indicate that differences between our findings and the literature may be partially based in methodology. Overall, our results do not support the hypothesis that the bones of flight are more laminar, suggesting a complex relation between functional loading and microstructural adaptation.

Lacunar-canalicular network in femoral cortical bone is reduced in aged women and is predominantly due to a loss of canalicular porosity

The lacunar-canalicular network (LCN) of bone contains osteocytes and their dendritic extensions, which allow for intercellular communication, and are believed to serve as the mechanosensors that coordinate the processes of bone modeling and remodeling. Imbalances in remodeling, for example, are linked to bone disease, including fragility associated with aging. We have reported that there is a reduction in scale for one component of the LCN, osteocyte lacunar volume, across the human lifespan in females. In the present study, we explore the hypothesis that canalicular porosity also declines with age. To visualize the LCN and to determine how its components are altered with aging, we examined samples from young (age: 20–23 y; n = 5) and aged (age: 70–86 y; n = 6) healthy women donors utilizing a fluorescent labelling technique in combination with confocal laser scanning microscopy. A large cross-sectional area of cortical bone spanning the endosteal to periosteal surfaces from the anterior proximal femoral shaft was examined in order to account for potential trans-cortical variation in the LCN. Overall, we found that LCN areal fraction was reduced by 40.6% in the samples from aged women. This reduction was due, in part, to a reduction in lacunar density (21.4% decline in lacunae number per given area of bone), but much more so due to a 44.6% decline in canalicular areal fraction. While the areal fraction of larger vascular canals was higher in endosteal vs. periosteal regions for both age groups, no regional differences were observed in the areal fractions of the LCN and its components for either age group. Our data indicate that the LCN is diminished in aged women, and is largely due to a decline in the canalicular areal fraction, and that, unlike vascular canal porosity, this diminished LCN is uniform across the cortex.

•

The lacunar-canalicular network (LCN) is reduced by 40.6% in aged women

•

The lacunar density (lacunae number per given area of bone) is reduced by 21.4% in aged women

•

The reduction in LCN in aged women is primarily due to a 44.6% loss of canaliculi

•

No endosteal vs. periosteal regional differences were observed in the LCN and its components in either young or aged women

•

A reduction in canaliculi with age may contribute to bone fragility in aged women

Utility of osteon circularity for determining species and interpreting load history in primates and nonprimates

OBJECTIVES

Histomorphological analyses of bones are used to estimate an individual's chronological age, interpret a bone's load history, and differentiate species. Among various histomorphological characteristics that can influence mechanical properties of cortical bone, secondary osteon (Haversian system) population density and predominant collagen fiber orientation are particularly important. Cross-sectional shape characteristics of secondary osteons (On.Cr = osteon circularity, On.El = osteon ellipticality) are considered helpful in these contexts, but more robust proof is needed. We sought to determine if variations in osteon shape characteristics are sufficient for accurately differentiating species, load-complexity categories, and regional habitual strain-mode distributions (e.g., tension vs. compression regions).

MATERIALS AND METHODS

Circularly polarized light images were obtained from 100-micron transverse sections from diaphyses of adult deer calcanei; sheep calcanei, radii, and tibiae; equine calcanei, radii, and third metacarpals (MC3s); chimpanzee femora; and human femora and fibulae. Osteon cross-sectional area (On.Ar), On.Cr, and On.El were quantified indiscriminately and in the contexts of load-complexity and regional strain-mode distributions.

RESULTS

On.Cr and On.El, when examined independently in terms of all data, or mean (nested) data, for each bone, exceeded 80% accuracy in the inter-species comparisons only with respect to distinguishing humans from nonhumans. Correct classification among the nonhuman species was <70%. When On.Cr and On.El were coupled together and with On.Ar in discriminant function analyses (nested and unnested data) there were high misclassifications in all but human vs. nonhuman comparisons.

DISCUSSION

Frequent misclassifications in nonhuman comparisons might reflect influences of habitual load complexity and/or strain-mode distributions, or other factors not accounted for by these two considerations.

Three-dimensional reconstruction of Haversian systems in human cortical bone using synchrotron radiation-based micro-CT: morphology and quantification of branching and transverse connections across age

This study uses synchrotron radiation-based micro-computed tomography (CT) scans to reconstruct three-dimensional networks of Haversian systems in human cortical bone in order to observe and analyse interconnectivity of Haversian systems and the development of total Haversian networks across different ages. A better knowledge of how Haversian systems interact with each other is essential to improve understanding of remodeling mechanisms and bone maintenance; however, previous methodological approaches (e.g. serial sections) did not reveal enough detail to follow the specific morphology of Haversian branching, for example. Accordingly, the aim of the present study was to identify the morphological diversity of branching patterns and transverse connections, and to understand how they change with age. Two types of branching morphologies were identified: lateral branching, resulting in small osteon branches bifurcating off of larger Haversian canals; and dichotomous branching, the formation of two new osteonal branches from one. The reconstructions in this study also suggest that Haversian systems frequently target previously existing systems as a path for their course, resulting in a cross-sectional morphology frequently referred to as 'type II osteons'. Transverse connections were diverse in their course from linear to oblique to curvy. Quantitative assessment of age-related trends indicates that while in younger human individuals transverse connections were most common, in older individuals more evidence of connections resulting from Haversian systems growing inside previously existing systems was found. Despite these changes in morphological characteristics, a relatively constant degree of overall interconnectivity is maintained throughout life. Altogether, the present study reveals important details about Haversian systems and their relation to each other that can be used towards a better understanding of cortical bone remodeling as well as a more accurate interpretation of morphological variants of osteons in cross-sectional microscopy. Permitting visibility of reversal lines, synchrotron radiation-based micro-CT is a valuable tool for the reconstruction of Haversian systems, and future analyses have the potential to further improve understanding of various important aspects of bone growth, maintenance and health.

Ancient Human Bone Microstructure in Medieval England: Comparisons between Two Socio-Economic Groups

Understanding the links between bone microstructure and human lifestyle is critical for clinical and anthropological research into skeletal growth and adaptation. The present study is the first to report correspondence between socio-economic status and variation in bone microstructure in ancient humans. Products of femoral cortical remodeling were assessed using histological methods in a large human medieval sample (N = 450) which represented two distinct socio-economic groups. Osteonal parameters were recorded in posterior midshaft femoral sections from adult males (N = 233) and females (N = 217). Using univariate and multivariate statistics, intact, fragmentary, and osteon population densities, Haversian canal area and diameter, and osteon area were compared between the two groups, accounting for sex, age, and estimated femoral robusticity. The size of osteons and their Haversian canals, as well as osteon density, varied significantly between the socio-economic groups, although minor inconsistencies were observed in females. Variation in microstructure was consistent with historical textual evidence that describes differences in mechanical loading and nutrition between the two groups. Results demonstrate that aspects of ancient human lifestyle can be inferred from bone microstructure.