Three-dimensional architecture of human medial gastrocnemius fascicles in vivo: Regional variation and its dependence on muscle size

Chronic Adaptions in Quadriceps Fascicle Mechanics Are Related to Altered Knee Biomechanics After Anterior Cruciate Ligament Reconstruction

Following anterior cruciate ligament reconstruction (ACLR), patients exhibit abnormal walking mechanics and quadriceps dysfunction. Quadriceps dysfunction has been largely attributed to muscle atrophy and weakness. While important, these factors do not capture intrinsic properties of muscle that govern its ability to generate force and withstand load. While fascicle abnormalities after ACLR have been documented in early stages of recovery (<12 mo), long-term effects of ACLR on fascicle mechanics remain unexplored. We evaluated quadriceps fascicle mechanics during walking 3 years post-ACLR and examined the relationship with knee mechanics. Participants included 24 individuals with ACLR and 24 Controls. Linear mixed models compared the ACLR, Contralateral, and Controls limbs for (1) quadriceps strength, (2) fascicle architecture and mechanics, and (3) knee mechanics. No difference in strength or overall fascicle length excursions was found between limbs. The ACLR limb exhibited longer fascicles at heel strike and peak knee extension moment (P < .001-.004), and smaller fascicle angles at heel strike, peak knee extension moment, and overall suppressed fascicle angle excursions (P < .001-.049) relative to the Contralateral and/or Control limb. This indicates an abnormality in fascicle architecture and mechanics following ACLR and suggests abnormalities in contractile function that cannot be explained by muscle weakness and may contribute to long-term gait irregularities.

Three-dimensional architecture and moment arms of human rotator cuff muscles in vivo: Interindividual, intermuscular, and intramuscular variations

The human rotator cuff consists of four muscles, each with a complex, multipennate architecture. Despite the functional and clinical importance, the architecture of the human rotator cuff has yet to be clearly described in humans in vivo. The purpose of this study was to investigate the intramuscular, intermuscular, and interindividual variations in architecture and moment arms of the human rotator cuff. Muscle volumes, fascicle lengths, physiological cross-sectional areas (PCSAs), pennation angles, and moment arms of all four rotator cuff muscles were measured from mDixon and diffusion tensor imaging (DTI) scans of the right shoulders of 20 young adults. In accordance with the most detailed dissections available to date, we found substantial intramuscular variation in fascicle length (coefficients of variation (CVs) ranged from 26% to 40%) and pennation angles (CVs ranged from 56% to 62%) in all rotator cuff muscles. We also found substantial intermuscular and interindividual variations in muscle volumes, but relatively consistent mean fascicle lengths, pennation angles, and moment arms (CVs for all ≤17%). Moreover, when expressed as a proportion of total rotator cuff muscle volume, the volumes of individual rotator cuff muscles were highly consistent between individuals and sexes (CVs ≤16%), suggesting that rotator cuff muscle volumes scale uniformly, at least in a younger population without musculoskeletal problems. Together, these data indicate limited interindividual and intermuscular variability in architecture, which may simplify scaling routines for musculoskeletal models. However, the substantial intramuscular variation in architecture questions the validity of previously reported mean architectural parameters to adequately describe rotator cuff function.

Intra and inter-rater variability in the construction of patient-specific musculoskeletal model

BACKGROUND

Variations observed in biomechanical studies might be attributed to errors made by operators during the construction of musculoskeletal models, rather than being solely attributed to patient-specific geometry.

RESEARCH QUESTION

What is the impact of operator errors on the construction of musculoskeletal models, and how does it affect the estimation of muscle moment arms and hip joint reaction forces?

METHODS

Thirteen independent operators participated in defining the muscle model, while a single operator performed 13 repetitions to define the muscle model based on 3D bone geometry. For each model, the muscle moment arms relative to the hip joint center of rotation was evaluated. Additionally, the hip joint reaction force during one-legged stance was assessed using static inverse optimization.

RESULTS

The results indicated high levels of consistency, as evidenced by the intra- rater and inter-rater agreement measured by the Intraclass Correlation Coefficient (ICC), which yielded values of 0.95 and 0.99, respectively. However, the estimated muscle moment arms exhibited an error of up to 16 mm compared to the reference musculoskeletal model. It was found that muscles attached to prominent anatomical landmarks were specified with greater accuracy than those attached over larger areas. Furthermore, the variability in estimated moment arms contributed to variations of up to 12% in the hip joint reaction forces.

SIGNIFICANCE

Both moment arm and muscle force demonstrated significantly lower variability when assessed by a single operator, suggesting the preference for employing a single operator in the creation of musculoskeletal models for clinical biomechanical studies.

Muscle morphology and architecture of the medial gastrocnemius between typically developing children with different ancestral background

Muscle ultrasonography is frequently used to improve the understanding of musculoskeletal impairments in children with spastic cerebral palsy (SCP). So far, most studies on muscle morphology and architecture have included typically developing children and children with SCP with similar ancestry, being mainly Caucasian. Less is known about differences in muscle morphology between children with different ancestral backgrounds. Therefore, the aim of this study was to compare muscle morphology and architecture of the medial gastrocnemius in typically developing children with African, South Asian and Southeast Asian descent from Suriname. This explorative cohort study identified children as Maroon (Ghana, African descent), Hindustani (India, South Asian) or Javanese (Indonesia, Southeast Asian), aged 5-10 years. Using 3D freehand ultrasound with the subject prone, the following medial gastrocnemius parameters were defined: muscle tendon unit (MTU) length, muscle belly length, tendon length, muscle volume, muscle thickness, anatomical cross-sectional area (ACSA), fascicle length, pennation angle, and physiological cross-sectional area (PCSA). In addition, differences between ancestral groups were assessed for the length of the MTU, muscle, tendon and fascicles in two passive stretch conditions corresponding to an externally applied joint torque of 1Nm and 4Nm. One-way ANOVA with post hoc t-tests were used to investigate differences between the ancestral groups. In total, 100 Hindustani (n = 34), Javanese (n = 34) and Maroon (n = 32) children were included. For statistical analyses, we matched the children by age, which resulted in groups of 25 children per ancestral group (n = 75). There were no differences found in MTU length, muscle belly length, ACSA, PCSA and muscle volume. Tendon length, fascicle length and pennation angle were different between ancestral groups. Compared to Javanese children, tendon length was longer (p = 0.001) and pennation angle (p = 0.001) was larger in Maroon children and fascicle length was shorter in both Maroon and Hindustani children (p < 0.001). While there was a difference found in MTU length at different conditions of passive stretch between ancestries, no differences were found in the muscle, tendon and fascicles. This is the first study that investigated macroscopic morphological and architectural parameters for the medial gastrocnemius in one extended cohort of typically developing children, stratified in three ancestral subgroups. The current results imply that ancestry-specific reference data for children are needed, especially for tendon length, fascicle length and pennation angle when investigating altered muscle morphology in neurological or neuromuscular pathologies, such as SCP. Future studies should report the ancestral background when describing muscle morphology and architecture of children and ancestral specifications should be included in normative databases.

A classification of the plantar intrinsic foot muscles based on the physiological cross-sectional area and muscle fiber length in healthy young adult males

BACKGROUND

Plantar intrinsic foot muscles (PIFMs) are composed of 10 muscles and play an essential role in achieving functional diversity in the foot. Previous studies have identified that the morphological profiles of PIFMs vary between individuals. The morphological profiles of a muscle theoretically reflect its output potentials: the physiological cross-sectional area (PCSA) of a muscle is proportional to its maximum force generation, and the muscle fiber length (FL) is its shortening velocity. This implies that the PCSA and FL may be useful variables for characterizing the functional diversity of the individual PIFM. The purpose of this study was to examine how individual PIFMs can be classified based on their PCSA and FL.

METHODS

In 26 healthy young adult males, the muscle volume and muscle length of seven PIFMs (abductor hallucis, ABDH; abductor digiti minimi, ABDM; adductor hallucis oblique head, ADDH-OH; ADDH transverse head, ADDH-TH; flexor digitorum brevis, FDB; flexor hallucis brevis, FHB; quadratus plantae, QP) were measured using magnetic resonance imaging. The PCSA and FL of each of the seven PIFMs were then estimated by combining the data measured from the participants and those of muscle architectural parameters documented from cadavers in previous studies. A total of 182 data samples (26 participants × 7 muscles) were classified into clusters using k-means cluster analysis. The optimal number of clusters was evaluated using the elbow method.

RESULTS

The data samples of PIFMs were assigned to four clusters with different morphological profiles: ADDH-OH and FHB, characterised by large PCSA and short FL (high force generation and slow shortening velocity potentials); ABDM and FDB, moderate PCSA and moderate FL (moderate force generation and moderate shortening velocity potentials); QP, moderate PCSA and long FL (moderate force generation and rapid shortening velocity potentials); ADDH-TH, small PCSA and moderate FL (low force generation and moderate shortening velocity potentials). ABDH components were assigned equivalently to the first and second clusters.

CONCLUSIONS

The approach adopted in this study may provide a novel perspective for interpreting the PIFMs' function based on their maximal force generation and shortening velocity potentials.

Coronal As Well As Sagittal Fascicle Dynamics Can Bring About a Gearing Effect in Muscle Elongation by Passive Lengthening

PURPOSE

The amount of muscle belly elongation induced by passive lengthening is often assumed to be equal to that of fascicles. But these are different if fascicles shorter than the muscle belly rotate around their attachment sites. Such discrepancy between fascicles and muscle belly length changes can be considered as gearing. As the muscle fascicle arrangement is 3D, the fascicle rotation by passive lengthening may occur in the coronal as well as the sagittal planes. Here we examined the fascicle 3D dynamics and resultant gearing during passive elongation of human medial gastrocnemius in vivo .

METHODS

For 16 healthy adults, we reconstructed fascicles three-dimensionally using diffusion tensor imaging and evaluated the change in fascicle length and angles in the sagittal and coronal planes during passive ankle dorsiflexion (from 20° plantar flexion to 20° dorsiflexion).

RESULTS

Whole muscle belly elongation during passive ankle dorsiflexion was 38% greater than the fascicle elongation. Upon passive lengthening, the fascicle angle in the sagittal plane in all regions (-5.9°) and that in the coronal plane in the middle-medial (-2.7°) and distal-medial (-4.3°) regions decreased significantly. Combining the fascicle coronal and sagittal rotation significantly increased the gearing effects in the middle-medial (+10%) and distal-medial (+23%) regions. The gearing effect by fascicle sagittal and coronal rotations corresponded to 26% of fascicle elongation, accounting for 19% of whole muscle belly elongation.

CONCLUSIONS

Fascicle rotation in the coronal and sagittal planes is responsible for passive gearing, contributing to the whole muscle belly elongation. Passive gearing can be favorable for reducing fascicle elongation for a given muscle belly elongation.

Distribution and length of muscle spindles and their 3D visualisation in the medial gastrocnemius of male and female rats

The spatial distribution of the medial gastrocnemius muscle spindles of 10 male and 10 female rats was analysed under a light microscope, and for the first time, visualised using a 3D model of the muscle. Serial cross-sections of the medial gastrocnemius muscles were separated into 10 divisions along with the proximo-distal axis. The muscle spindles of the rat medial gastrocnemius were predominantly distributed on the proximo-medial divisions of the muscle. There were no sex-related differences in the distribution of the studied receptors. A single division contained an average of 2.71 receptors for animals of both sexes. Moreover, the calculated lengths of male and female rat muscle spindles were comparable, and average lengths did not significantly differ (3.30 ± 1.47 mm for male and 3.26 ± 1.32 mm for female rats). Therefore, the present results fill gaps in recent observations concerning similarities in muscle spindle numbers between male and female animals, despite significant differences in muscle mass and size.

Impairments in muscle shape changes affect metabolic demands during in-vivo contractions

The uncoupling behaviour between muscle belly and fascicle shortening velocity (i.e. belly gearing), affects mechanical output by allowing the muscle to circumvent the limits imposed by the fascicles' force-velocity relationship. However, little is known about the 'metabolic effect' of a decrease/increase in belly gearing. In this study, we manipulated the plantar flexor muscles' capacity to change in shape (and hence belly gearing) by using compressive multidirectional loads. Metabolic, kinetic, electromyography activity and ultrasound data (in soleus and gastrocnemius medialis) were recorded during cyclic fixed-end contractions of the plantar flexor muscles in three different conditions: no load, +5 kg and +10 kg of compression. No differences were observed in mechanical power and electrophysiological variables as a function of compression intensity, whereas metabolic power increased as a function of it. At each compression intensity, differences in efficiency were observed when calculated based on fascicle or muscle behaviour and significant positive correlations (R2 range: 0.7-0.8 and p > 0.001) were observed between delta efficiency (ΔEff: Effmus-Efffas) and belly gearing (Vmus/Vfas) or ΔV (Vmus-Vfas). Thus, changes in the muscles' capacity to change in shape (e.g. in muscle stiffness or owing to compressive garments) affect the metabolic demands and the efficiency of muscle contraction.

Active Heat Acclimation Does Not Alter Muscle-Tendon Unit Properties

PURPOSE

Heat acclimation (HA) is recommended before competing in hot and humid conditions. HA has also been recently suggested to increase muscle strength, but its effects on human's muscle and tendon mechanical properties are not yet fully understood. This study investigated the effect of active HA on gastrocnemius medialis (GM) muscle-tendon properties.

METHODS

Thirty recreationally active participants performed 13 low-intensity cycling sessions, distributed over a 17-d period in hot (HA = ~38°C, ~58% relative humidity; n = 15) or in temperate environment (CON = ~23°C, ~35% relative humidity; n = 15). Mechanical data and high-frame rate ultrasound images were collected during electrically evoked and voluntary contractions pre- and postintervention. Shear modulus was measured at rest in GM, and vertical jump performance was assessed.

RESULTS

Core temperature decreased from the first to the last session in HA (-0.4°C ± 0.3°C; P = 0.015), while sweat rate increased (+0.4 ± 0.3 L·h -1 ; P = 0.010), suggesting effective HA, whereas no changes were observed in CON (both P ≥ 0.877). Heart rate was higher in HA versus CON and decreased throughout intervention in groups (both P ≤ 0.008), without an interaction effect ( P = 0.733). Muscle-tendon unit properties (i.e., maximal and explosive isometric torque production, contractile properties, voluntary activation, joint and fascicular force-velocity relationship, passive muscle, and active tendon stiffness) and vertical jump performance did not show training ( P ≥ 0.067) or group-training interaction ( P ≥ 0.232) effects.

CONCLUSIONS

Effective active HA does not alter muscle-tendon properties. Preparing hot and humid conditions with active HA can be envisaged in all sporting disciplines without the risk of impairing muscle performance.

In Vivo 3D Muscle Architecture Quantification Based on 3D Freehand Ultrasound and Magnetic Resonance Imaging

Muscle architecture parameters, such as the fascicle length, pennation angle, and volume, are important muscle morphology characteristics. Accurate in vivo quantification of these parameters allows to detect changes due to pathologies, interventions, and rehabilitation trainings, which ultimately impact on muscles' force-producing capacity. In this study, we compared three-dimensional (3D) muscle architecture parameters of the tibialis anterior and gastrocnemius medialis, which were quantified by 3D freehand ultrasound (3DfUS) and a magnetic resonance imaging (MRI) technique, diffusion tensor imaging (DTI), respectively. Sixteen able-bodied subjects were recruited where seven of them received both 3DfUS and MRI measurement, while the rest underwent 3DfUS measurements twice. Good to excellent intra-rater reliability and inter-session repeatability were found in 3DfUS measurements (intra-class correlation coefficient > 0.81). Overall, the two imaging modalities yielded consistent measurements of the fascicle length, pennation angle, and volume with mean differences smaller than 2.9 mm, 1.8°, and 5.7 cm³, respectively. The only significant difference was found in the pennation angle of the tibialis anterior, although the discrepancy was small. Our study demonstrated, for the first time, that 3DfUS measurement had high reliability and repeatability for measurement of muscle architecture in vivo and could be regarded as an alternative to MRI for 3D evaluation of muscle morphology.