Asymmetric nasomaxillary expansion induced by tooth-bone-borne expander producing differential craniofacial changes

Progress in Biomaterials and Technologies in Dentistry

The field of dental biomedicine continues to evolve with significant advancements that are aimed at improving oral health outcomes [...].

Effects of different expansion appliances and surgical incisions on maxillary expansion: A finite element analysis

PURPOSE

This study aims to assess the impact of different surgical techniques and three expansion appliances on maxillary expansion in adults using finite element analysis (FEA), with a focus on maxillary displacement and stress on surrounding structures.

METHODS

Seven different FEA models were created to compare different surgical techniques and three different expansion appliances. Model I represented a bone-supported appliance without surgical assistance. Model II, Model III, and Model IV were surgically assisted rapid palatal expansion (SARPE) models without pterygomaxillary suture disjunction (PMD). Model V, Model VI, and Model VII were SARPE models with PMD.

RESULTS

The largest displacement at the anterior nasal spine (ANS) was recorded for Model II (2.95 mm). For the posterior nasal spine (PNS), the highest displacement was observed in Models V, VI, VII (2.50 mm), with the lowest in Model III (0.79 mm). Stress analysis revealed the highest stress in Model I, with models featuring PMD displaying nearly zero stress at all anatomical points, highlighting distinct expansion patterns and stress distributions between models with and without PMD.

CONCLUSION

SARPE models with PMD demonstrated a parallel expansion of the maxilla with minimal stress, while the miniscrew assisted rapid maxillary expansion (MARPE) model displayed transverse rotation. SARPE models without PMD exhibited a V-shaped expansion pattern. SARPE models with PMD represent an optimal approach for achieving uniform expansion and minimizing stress, with stress levels nearly negligible at all anatomical points in models with PMD.

Effects of SARPE and MISMARPE on correction of transverse maxillary deficiency: A preliminary comparative evaluation

AIM

The present study was designed to compare, on cone-beam computed tomography imaging, the skeletal and dental effects of the SARPE (Surgically assisted rapid palatal expansion) and MISMARPE (Minimally Invasive Surgical and Miniscrew-Assisted Rapid Palatal Expansion) techniques.

MATERIALS AND METHODS

The sample of adult patients with transverse maxillary deficiency (TMD) was divided into two groups, and scans were obtained preoperatively (T0) and immediately after completion of expansion (T1). The posterior and anterior linear transverse distances of the maxilla and the angulation of the maxillary first molars were evaluated. The data were entered into a generalized estimating equations model to verify the postoperative effects of the different techniques.

RESULTS

None of the techniques caused any appreciable change in the angulation of the molars. The skeletal changes were similar, with significantly greater gains in the nasal fossa and intermaxillary distance when using the MISMARPE.

CONCLUSION

The technique can be an effective and lower morbidity alternative to SARPE.

Maxillary expansion in nongrowing patients. Conventional, surgical, or miniscrew-assisted, an update

Maxillary transverse deficiency can occur in various clinical dentoskeletal deformities and include unilateral or bilateral posterior crossbite, narrow, tapering, or high palatal arch. The development of temporary anchorage devices led to a new generation of tooth-bone-borne expansion appliance using two or four screws to apply the mechanical forces to the bone and reduce the stress to the anchored teeth. The aim of these new devices is to reduce the adverse dentoalveolar effect and achieve more skeletal expansion than conventional tooth-borne rapid palatal expansion. This article reviews the age limitation and complication and soft tissue change of nonsurgical maxillary expansion. We discuss the approach of surgical maxillary expansion with maxillary skeletal expander device. The clinical case will show the benefit of nonsurgical and surgical tooth-bone-borne rapid palatal expansion.

Three-dimensional comparison of bone-borne and tooth-bone-borne maxillary expansion in young adults with maxillary skeletal deficiency

OBJECTIVE

To compare the transverse dental and skeletal changes in patients treated with bone-anchored palatal expander (bone-borne, BB) compared to patients treated with tooth and bone-anchored palatal expanders (tooth-bone-borne, TBB) using cone-beam computer tomography (CBCT) and 3D image analysis.

METHODS

The sample comprised 30 patients with transverse maxillary discrepancy treated with two different types of appliances: bone-borne (Group BB) and tooth-bone-borne (Group TBB) expanders. CBCT scans were acquired before (T1) and after completion of maxillary expansion (T2); the interval was 5.4 ± 3.4 and 6.2 ± 2.1 months between the T1 and the T2 scans of Group TBB (tooth-bone-borne) and Group BB (bone-borne), respectively. Transverse, anteroposterior and vertical linear and angular three-dimensional dentoskeletal changes were assessed after cranial base superimposition.

RESULTS

Both groups displayed marked transverse skeletal expansion with a greater ratio of skeletal to dental changes. Greater changes at the nasal cavity, zygoma and orbital levels were found in Group BB. A relatively parallel sutural opening in an anterior-posterior direction was observed in Group TBB; however, the Group BB presented a somewhat triangular (V-shaped) opening of the suture that was wider anteriorly. Small downward-forward displacements were observed in both groups. Asymmetric expansion occurred in approximately 50% of the patients in both groups.

CONCLUSION

Greater skeletal vs dental expansion ratio and expansion of the circummaxillary regions were found in Group BB, the group in which a bone-borne expander was used. Both groups presented skeletal and dental changes, with a similar amount of posterior palate expansion. Asymmetric expansion was observed in both groups.

Three-dimensional assessment of asymmetric mid-palatal suture expansion assisted by a customized microimplant-supported rapid palatal expander in non-growing patients: Uncontrolled Clinical Trial

OBJECTIVES

The objective was to evaluate the magnitude, incidence and possible factors of asymmetric expansion with a customized microimplant-supported rapid palatal expander (MARPE) in non-growing patients.

SETTING AND SAMPLE POPULATION

This retrospective study included a sample of 49 patients (mean age: 23.9 ± 3.9 years) treated with a customized microimplant-supported rapid palatal expander. Based on the symmetry of expansion, the sample was divided into Group S (symmetric expansion group, n = 26) and Group A (asymmetric expansion group, n = 23).

METHODS

Pre- and post-treatment cone-beam computed tomography (CBCT) images were superimposed to assess skeletal change in both studied groups. Seven variables were tested: unilateral crossbite, maxillary base cant, chin deviation, the initial asymmetrical position of the mid-palatal suture, split pattern of frontomaxillary suture, Angle's classification and dental arch crowding. Paired t-test and logistic regression analyses were utilized to evaluate the possible factors behind the asymmetric expansion.

RESULTS

There was a significant difference (P < .01) between the studied groups. The average expansion was 4.26 mm at the anterolateral maxillary walls (BB) and 3.83 mm at the greater palatine foramen region (GPF). The average expansion at the GPF was 90% of that at the BB. The frequency of asymmetric expansion was 46.9%. Among the seven tested variables, the presence of the initial asymmetric position of the mid-palatal suture is the only variable that showed correlation with asymmetric expansion.

CONCLUSION

Initial asymmetric position of the mid-palatal suture is considered a contributing factor of skeletal asymmetric expansion following microimplant-supported rapid palatal expansion in skeletally comparable patients.

Rapid Palatal Expansion Should Not Be Trivialized: Two Case Reports of Unexpected Complications

Rapid maxillary expansion is one of the most common orthodontic procedures performed in the pediatric population, easy to accomplish and compliance free, therefore really effective. Nevertheless, a careful diagnosis and frequent clinical follow-up appointments are necessary during the first weeks of active treatment. The purpose of this article was to report two cases of unexpected complications during orthopaedic maxillary expansion, involving two 7-year-old female patients, one presenting a saddle nose with suborbital hematoma and the other one an asymmetric palatal expansion. In both cases, the clinical situation progressively relapsed during the months following expansion appliance removal.

Palatal temporary skeletal anchorage devices (TSADs): What to know and how to do?

OBJECTIVES

Since palatal temporary skeletal anchorage devices (TSADs) have become important tools for orthodontic treatment, this narrative review was aimed to provide an updated and integrated guidelines for the clinical application of palatal TSADs.

SETTING AND SAMPLE POPULATION

A narrative review article including researches on palatal TSADs in orthodontics related to anatomy, success rate and clinical application.

MATERIALS AND METHODS

The anatomical characteristics, success rate and its consideration factors and clinical application of palatal TSADs based on the direction of tooth movement were evaluated.

RESULTS

To improve the stability of TSADs, hard tissue factors such as bone depth, cortical bone thickness, bone density and soft tissue thickness were evaluated. Anatomically risky structures, including the nasopalatine foramen, canal and the greater palatine foramen, nerve, vessel need to be identified before placement. The success rate of palatal TSADs was greater than that of the buccal inter-radicular space. Palatal TSADs have been used for various purposes because they can control tooth movement in all directions and, three-dimensionally; their applications include the retraction of anterior teeth, protraction of posterior teeth, distalization, intrusion, expansion and constriction. They can be applied directly or indirectly to the lingual arch or transpalatal arch. Design modifications using splinted 2 miniscrews have been suggested.

CONCLUSION

Palatal TSADs allow clinicians to perform minimally invasive and easy placement with good stability by understanding the anatomical characteristics of the palatal region, and they show good control over 3-dimensional tooth movements in various clinical cases.

Advanced interdisciplinary treatment protocol for pediatric obstructive sleep apnea including medical, surgical, and orthodontic care: a narrative review

OBJECTIVE

To suggest an updated interdisciplinary treatment protocol for pediatric obstructive sleep apnea (POSA) based on the integration of craniofacial growth modification into medical and surgical sleep practice.

METHODS

PubMed, Scopus, and Cochrane library were searched up to February 2020 using keywords. Among 184 articles, 80 studies were finally included. An integrated treatment protocol for POSA encompassing craniofacial skeletal management as well as medical and surgical care was attempted.

RESULTS

A differential diagnostic workflow for identifying the phenotype of POSA was suggested, and a phenotype-based treatment protocol for POSA was proposed. Despite the lack of high level of evidence, timely skeletal growth modification in three dimensions using craniofacial growth potential could be valuable treatment for upper airway development in POSA patients with craniofacial phenotypic cause.

CONCLUSION

A novel precision treatment protocol will advance clinicians to determine the primary option or to apply the combined strategy for POSA patients.

Miniscrew-assisted rapid palatal expansion: A review of recent reports

The miniscrew-assisted rapid palatal expander (MARPE) has extended not only skeletal effects with fewer dental changes and but also the age limit of nonsurgical maxillary expansion treatment. Amid its gaining popularity in clinical orthodontics, our current understanding of treatment effectiveness, efficiency, and stability needs to be reassessed. In this review article, the authors have attempted to evaluate MARPE from various aspects with a focus on recent studies.

Simplified orthognathic surgical treatment using non-surgical asymmetric maxillary expansion: A case report

BACKGROUND

Transverse problems can be exacerbated by highly compensated occlusion in patients with skeletal asymmetry, which makes pre-surgical decompensation harder to achieve.

OBJECTIVE

This case report describes a case of combined orthognathic surgery with facial asymmetry. We used pre-orthodontic surgical simulation to visualize the goal for presurgical orthodontics, planning for a one-jaw surgical treatment option.

METHODS

The planned asymmetric expansion was performed using a maxillary skeletal expander (MSE II) with surgical corticopuncture over only the left side before MSE activation. Surgery was performed to achieve mandibular left outward yaw rotation to correct the patient's facial asymmetry after the planned amount of expansion was reached.

RESULTS

The results showed substantial improvement of facial aesthetics as well as skeletal symmetry. Cooperation and communication between surgeon and orthodontist ensured that the final results were satisfactory.