Highly efficient transgene-free targeted mutagenesis and single-stranded oligodeoxynucleotide-mediated precise knock-in in the industrial microalga Euglena gracilis using Cas9 ribonucleoproteins

Genome editing-based mutagenesis stably modifies composition of wax esters synthesized by Euglena gracilis under anaerobic conditions

Microalgal oil production represents a promising renewable biofuel source. Metabolic engineering can enhance its utility, transforming it into an improved biofuel and expanding its applications as a feedstock for commodity chemicals, thereby increasing their value in biorefineries. This study focused on anaerobic wax ester production by the microalga Euglena gracilis, aiming to develop stable mutant strains with altered wax ester profiles through genome editing. Two enzymes in the fatty acid beta-oxidation pathway involved in wax ester production were targeted-3-ketoacyl-CoA thiolase and acyl-CoA dehydrogenase-using clustered regularly interspaced short palindromic repeats/Cas9. The results revealed one genetic mutation that lengthened and three that shortened the distribution of wax ester compositions compared to the wild-type (WT). The triple-KO mutant, combining mutations that shorten wax ester chains, produced wax esters with acyl chains two carbons shorter than WT. This study established a methodology to stably modify wax ester composition in E. gracilis.

A chromosome-level genome assembly for the paramylon-producing microalga Euglena gracilis

Euglena gracilis (E. gracilis), pivotal in the study of photosynthesis, endosymbiosis, and chloroplast development, is also an industrial microalga for paramylon production. Despite its importance, E. gracilis genome exploration faces challenges due to its intricate nature. In this study, we achieved a chromosome-level de novo assembly (2.37 Gb) using Illumina, PacBio, Bionano, and Hi-C data. The assembly exhibited a contig N50 of 619 Kb and scaffold N50 of 1.12 Mb, indicating superior continuity. Approximately 99.83% of the genome was anchored to 46 chromosomes, revealing structural insights. Repetitive elements constituted 58.84% of the sequences. Functional annotations were assigned to 39,362 proteins, enhancing interpretative power. BUSCO analysis confirmed assembly completeness at 80.39%. This first high-quality E. gracilis genome offers insights for genetics and genomics studies, overcoming previous limitations. The impact extends to academic and industrial research, providing a foundational resource.

High-efficiency genome editing by Cas12a ribonucleoprotein complex in Euglena gracilis

Transgene-free genome editing based on clustered regularly interspaced short palindromic repeats (CRISPR) technology is key to achieving genetic engineering in microalgae for basic research and industrial applications. Euglena gracilis, a unicellular phytoflagellate microalga, is a promising biomaterial for foods, feeds, cosmetics and biofuels. However, methods for the genetic manipulation of E. gracilis are still limited. Here, we developed a high-efficiency, transgene-free genome editing method for E. gracilis using Lachnospiraceae bacterium CRISPR-associated protein 12a (LbCas12a) ribonucleoprotein (RNP) complex, which complements the previously established Cas9 RNP-based method. Through the direct delivery of LbCas12a-containing RNPs, our method reached mutagenesis rates of approximately 77.2-94.5% at two different E. gracilis target genes, Glucan synthase-like 2 (EgGSL2) and a phytoene synthase gene (EgcrtB). Moreover, in addition to targeted mutagenesis, we demonstrated efficient knock-in and base editing at the target site using LbCas12a-based RNPs with a single-stranded DNA donor template in E. gracilis. This study extends the genetic engineering capabilities of Euglena to accelerate its basic use for research and engineering for bioproduction.

Zeaxanthin is required for eyespot formation and phototaxis in Euglena gracilis

The eyespot apparatus is an organelle that forms carotenoid-rich globules in diverse flagellated microalgae and functions in phototaxis. The euglenophytes have structurally and functionally distinct eyespot apparatuses from chlorophytes. β-Carotene is the most abundant pigment detected in chlorophytes' eyespots, while xanthophylls such as zeaxanthin and diadinoxanthin have been suggested to function in euglenophytes' eyespots. Here, we investigated the association between carotenoid composition and eyespot formation via pathway-scale mutagenesis using clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9)-mediated genome editing in the euglenophyte Euglena gracilis. Lycopene cyclase (lcy) mutants exhibited sole lycopene accumulation, defective red eyespots, and phototactic insensitivity. Conversely, β-carotene hydroxylase (cytochrome P450 97h1, cyp97h1) mutants accumulated β-carotene and its hydroxylated products β-cryptoxanthin and zeaxanthin and formed phototactic eyespot apparatuses, while cyp97h1 cyp97f2 double mutants were deficient in β-carotene hydroxylation and mostly lacked functional eyespots. Thus, zeaxanthin is required for the stable formation of functional eyespots in E. gracilis, highlighting evolutionary differences between euglenophytes and chlorophytes in the metabolic regulation of photoreactive organelle formation.

Genome engineering via gene editing technologies in microalgae

CRISPR-Cas has revolutionized genetic modification with its comparative simplicity and accuracy, and it can be used even at the genomic level. Microalgae are excellent feedstocks for biofuels and nutraceuticals because they contain high levels of fatty acids, carotenoids, and other metabolites; however, genome engineering for microalgae is not yet as developed as for other model organisms. Microalgal engineering at the genetic and metabolic levels is relatively well established, and a few genomic resources are available. Their genomic information was used for a "safe harbor" site for stable transgene expression in microalgae. This review proposes further genome engineering schemes including the construction of sgRNA libraries, pan-genomic and epigenomic resources, and mini-genomes, which can together be developed into synthetic biology for carbon-based engineering in microalgae. Acetyl-CoA is at the center of carbon metabolic pathways and is further reviewed for the production of molecules including terpenoids in microalgae.

Versatile biotechnological applications of Euglena gracilis

Euglena gracilis is a freshwater protist possessing secondary chloroplasts of green algal origin. Various physical factors (e.g. UV) and chemical compounds (e.g. antibiotics) cause the bleaching of E. gracilis cells-the loss of plastid genes leading to the permanent inability to photosynthesize. Bleaching can be prevented by antimutagens (i.e. lignin, vitamin C and selenium). Besides screening the mutagenic and antimutagenic activity of chemicals, E. gracilis is also a suitable model for studying the biological effects of many organic pollutants. Due to its capability of heavy metal sequestration, it can be used for bioremediation. E. gracilis has been successfully transformed, offering the possibility of genetic modifications for synthesizing compounds of biotechnological interest. The novel design of the "next generation" transgenic expression cassettes with respect to the specificities of euglenid gene expression is proposed. Moreover, E. gracilis is a natural source of commercially relevant bioproducts such as (pro)vitamins, wax esters, polyunsaturated fatty acids and paramylon (β-1,3-glucan). One of the highest limitations of large-scale cultivation of E. gracilis is its disability to synthesize essential vitamins B₁ and B₁₂. This disadvantage can be overcome by co-cultivation of E. gracilis with other microorganisms, which can synthesize sufficient amounts of these vitamins. Such co-cultures can be used for the effective accumulation and harvesting of Euglena biomass by bioflocculation.

Biofuel production from Euglena: Current status and techno-economic perspectives

Sustainable aviation fuels (SAFs) can contribute reduce greenhouse gas emissions compared to conventional fuel. With the increasing SAFs demand, various generations of resources have been shifted from the 1st generation (oil crops), the 2nd generation (agricultural waste), to the 3rd generation (microalgae). Microalgae are the most suitable feedstock for jet biofuel production than other resources because of their productivity and capability to capture carbon dioxide. However, microalgae-based biofuel has a limitation of high freezing point. Recently, a jet biofuel derived from Euglena wax ester has been paying attention due to its low freezing point. Challenges still remain to enhance production yields in both upstream and downstream processes. Studies on downstream processes as well as techno-economic analysis on biofuel production using Euglena are highly limited to date. Economic aspects for the biofuel production will be ensured via valorization of industrial byproducts such as food wastes.

Microalgae-based removal of pollutants from wastewaters: Occurrence, toxicity and circular economy

The natural and anthropogenic sources of water bodies are contaminated with diverse categories of pollutants such as antibiotics, pharmaceuticals, pesticides, heavy metals, organic compounds, and other industrial chemicals. Depending on the type and the origin of the pollutants, the degree of contamination can be categorized into lower to higher concentrations. Therefore, the removal of hazardous chemicals from the environment is an important aspect. The physical, chemical and biological approaches have been developed and implemented to treat wastewaters. The microbial and algal treatment methods have emerged as a growing field due to their eco-friendly and sustainable approach. Particularly, microalgae emerged as a potential organism for the treatment of contaminated water bodies. The microalgae of the genera Chlorella, Anabaena, Ankistrodesmus, Aphanizomenon, Arthrospira, Botryococcus, Chlamydomonas, Chlorogloeopsis, Dunaliella, Haematococcus, Isochrysis, Nannochloropsis, Porphyridium, Synechococcus, Scenedesmus, and Spirulina reported for the wastewater treatment and biomass production. Microalgae have the potential for adsorption, bioaccumulation, and biodegradation. The microalgal strains can mitigate the hazardous chemicals via their diverse cellular mechanisms. Applications of the microalgae strains were found to be effective for sustainable developments and circular economy due to the production of biomass with the utilization of pollutants.

Carotenoids Biosynthesis, Accumulation, and Applications of a Model Microalga Euglenagracilis

The carotenoids, including lycopene, lutein, astaxanthin, and zeaxanthin belong to the isoprenoids, whose basic structure is made up of eight isoprene units, resulting in a C40 backbone, though some of them are only trace components in Euglena. They are essential to all photosynthetic organisms due to their superior photoprotective and antioxidant properties. Their dietary functions decrease the risk of breast, cervical, vaginal, and colorectal cancers and cardiovascular and eye diseases. Antioxidant functions of carotenoids are based on mechanisms such as quenching free radicals, mitigating damage from reactive oxidant species, and hindering lipid peroxidation. With the development of carotenoid studies, their distribution, functions, and composition have been identified in microalgae and higher plants. Although bleached or achlorophyllous mutants of Euglena were among the earliest carotenoid-related microalgae under investigation, current knowledge on the composition and biosynthesis of these compounds in Euglena is still elusive. This review aims to overview what is known about carotenoid metabolism in Euglena, focusing on the carotenoid distribution and structure, biosynthesis pathway, and accumulation in Euglena strains and mutants under environmental stresses and different culture conditions. Moreover, we also summarize the potential applications in therapy preventing carcinogenesis, cosmetic industries, food industries, and animal feed.

Multi-omics approaches and genetic engineering of metabolism for improved biorefinery and wastewater treatment in microalgae

Microalgae, a group of photosynthetic microorganisms rich in diverse and novel bioactive metabolites, have been explored for the production of biofuels, high value-added compounds as food and feeds, and pharmaceutical chemicals as agents with therapeutic benefits. This article reviews the development of omics resources and genetic engineering techniques including gene transformation methodologies, mutagenesis, and genome-editing tools in microalgae biorefinery and wastewater treatment. The introduction of these enlisted techniques has simplified the understanding of complex metabolic pathways undergoing microalgal cells. The multiomics approach of the integrated omics datasets, big data analysis, and machine learning for the discovery of objective traits and genes responsible for metabolic pathways was reviewed. Recent advances and limitations of multiomics analysis and genetic bioengineering technology to facilitate the improvement of microalgae as the dual role of wastewater treatment and biorefinery feedstock production are discussed. This article is protected by copyright. All rights reserved.

A Synthetic Biology Perspective on the Bioengineering Tools for an Industrial Microalga: Euglena gracilis

Euglena is a genus of single-celled eukaryotes that show both plant- and animal-like characteristics. Euglena gracilis, a model species, is of great academic interest for studying endosymbiosis and chloroplast development. As an industrial species, E. gracilis is also of primary biotechnological and economic importance as high value-added food, medicine, and cosmetic and high-quality feedstock for jet-fuel production because of its cells containing many high-value products, such as vitamins, amino acids, pigments, unsaturated fatty acids, and carbohydrate paramylon, as metabolites. For more than half a century, E. gracilis has been used as an industrial biotechnology platform for fundamental biology research, mainly exploring relevant physiological and biochemical method studies. Although many researchers focused on genetic engineering tools for E. gracilis in recent years, little progress has been achieved because of the lack of high-quality genome information and efficient techniques for genetic operation. This article reviewed the progress of the genetic transformation of E. gracilis, including methods for the delivery of exogenous materials and other advanced biotechnological tools for E. gracilis, such as CRISPR and RNA interference. We hope to provide a reference to improve the research in functional genomics and synthetic biology of Euglena.

Genome editing with removable TALEN vectors harboring a yeast centromere and autonomous replication sequence in oleaginous microalga

Algal lipids are expected to become a basis for sustainable fuels because of the highly efficient lipid production by photosynthesis accompanied by carbon dioxide assimilation. Molecular breeding of microalgae has been studied to improve algal lipid production, but the resultant gene-modified algae containing transgenes are rarely used for outdoor culture because the use of genetically modified organisms (GMOs) is strictly restricted under biocontainment regulations. Recently, it was reported that plasmids containing yeast centromere and autonomous replication sequence (CEN/ARS) behaved as episomes in Nannochloropsis species. We previously reported that the Platinum TALEN (PtTALEN) system exhibited high activity in Nannochloropsis oceanica. Therefore, we attempted to develop a genome editing system in which the expression vectors for PtTALEN can be removed from host cells after introduction of mutations. Using all-in-one PtTALEN plasmids containing CEN/ARS, targeted mutations and removal of all-in-one vectors were observed in N. oceanica, suggesting that our all-in-one PtTALEN vectors enable the construction of mutated N. oceanica without any transgenes. This system will be a feasible method for constructing non-GMO high-performance algae.

Microalgae-based technology for antibiotics removal: From mechanisms to application of innovational hybrid systems

Antibiotics contamination is an emerging environmental concern, owing to its potential risks to ecosystems and human health. Microalgae-based technology has been widely reported as a promising alternative to conventional wastewater treatment, since it is a solar-power driven, ecologically friendly, cost-effective, and sustainable reclamation strategy. This review provides fundamental insights into the major mechanisms underpinning microalgae-based antibiotics removal, including bioadsorption, bioaccumulation, and biodegradation. The critical role of extracellular polymeric substances on bioadsorption and extracellular biodegradation of antibiotics are also covered. Moreover, this review sheds light on the important factors affecting the removal of antibiotics by microalgae, and summarizes several novel approaches to improve the removal efficiency, including acclimation, co-metabolism and microbial consortium. Besides, hybrid systems (such as, microalgae-based technologies combined with the conventional activated sludge, advanced oxidation processes, constructed wetlands, and microbial fuel cells), and genetic engineering are also recommended, which will be feasible for enhanced removal of antibiotics. Finally, this review also highlights the need for further studies aimed at optimizing microalgae-based technology, with emphasis on improving performance and expanding its application in large-scale settings, especially in terms of technical, environmental-friendly and economically competitiveness. Overall, this review summarizes current understanding on microalgae-based technologies for removal of antibiotics and outlines future research directions.

CRISPR/Cas9-induced β-carotene hydroxylase mutation in Dunaliella salina CCAP19/18

Dunaliella salina (D. salina) has been exploited as a novel expression system for the field of genetic engineering. However, owing to the low or inconsistent expression of target proteins, it has been greatly restricted to practical production of recombinant proteins. Since the accurate gene editing function of clustered regularly interspaced short palindromic repeat (CRISPR)/Cas system, β-carotene hydroxylase gene was chosen as an example to explore D. salina application with the purpose of improving expression level of foreign genes. In this paper, based on pKSE401 backbone, three CRISPR/Cas9 binary vectors were constructed to targeting exon 1 and 3 of the β-carotene hydroxylase of D. salina CCAP19/18 (Dschyb). D. salina mutants were obtained by salt gradient transformation method, and the expression of Dschyb gene were identified through real-time fluorescent quantitative PCR. Moreover, carotenoids content was analyzed by high-performance liquid chromatography at different time points after high intensity treatment. Compared with wild type strains, the β-carotene levels of mutants showed a significant increase, nearly up to 1.4 μg/ml, and the levels of zeaxanthin decreased to various degrees in mutants. All the results provide a compelling evidence for targeted gene editing in D. salina. This study gave a first successful gene editing of D. salina which has a very important practical significance for increasing carotene yield and meeting realistic industry demand. Furthermore, it provides an approach to overcome the current obstacles of D. salina, and then gives a strong tool to facilitates the development and application of D. salina system.

Genome engineering of Nannochloropsis with hundred-kilobase fragment deletions by Cas9 cleavages

Industrial microalgae are promising photosynthetic cell factories, yet tools for large-scale targeted genome engineering are limited. Here for the model industrial oleaginous microalga Nannochloropsis oceanica, we established a method to precisely and serially delete large genome fragments of ~100 kb from its 30.01 Mb nuclear genome. We started by identifying the 'non-essential' chromosomal regions (i.e. low expression region or LER) based on minimal gene expression under N-replete and N-depleted conditions. The largest such LER (LER1) is ~98 kb in size, located near the telomere of the 502.09-kb-long Chromosome 30 (Chr 30). We deleted 81 kb and further distal and proximal deletions of up to 110 kb (21.9% of Chr 30) in LER1 by dual targeting the boundaries with the episome-based CRISPR/Cas9 system. The telomere-deletion mutants showed normal telomeres consisting of CCCTAA repeats, revealing telomere regeneration capability after losing the distal part of Chr 30. Interestingly, the deletions caused no significant alteration in growth, lipid production or photosynthesis (transcript-abundance change for < 3% genes under N depletion). We also achieved double-deletion of both LER1 and LER2 (from Chr 9) that total ~214 kb at maximum, which can result in slightly higher growth rate and biomass productivity than the wild-type. Therefore, loss of the large, yet 'non-essential' regions does not necessarily sacrifice important traits. Such serial targeted deletions of large genomic regions had not been previously reported in microalgae, and will accelerate crafting minimal genomes as chassis for photosynthetic production.

Euglenozoa: taxonomy, diversity and ecology, symbioses and viruses

Euglenozoa is a species-rich group of protists, which have extremely diverse lifestyles and a range of features that distinguish them from other eukaryotes. They are composed of free-living and parasitic kinetoplastids, mostly free-living diplonemids, heterotrophic and photosynthetic euglenids, as well as deep-sea symbiontids. Although they form a well-supported monophyletic group, these morphologically rather distinct groups are almost never treated together in a comparative manner, as attempted here. We present an updated taxonomy, complemented by photos of representative species, with notes on diversity, distribution and biology of euglenozoans. For kinetoplastids, we propose a significantly modified taxonomy that reflects the latest findings. Finally, we summarize what is known about viruses infecting euglenozoans, as well as their relationships with ecto- and endosymbiotic bacteria.

Efficient and multiplexable genome editing using Platinum TALENs in oleaginous microalga, Nannochloropsis oceanica NIES-2145

Algae accumulate large amounts of lipids produced by photosynthesis, and these lipids are expected to be utilized as feedstocks for sustainable new energies, known as biodiesels. Nannochloropsis species are eukaryotic microalgae that produce high levels of lipids. However, since the production costs of algal biodiesels are higher than those of fossil fuels, the improved productivity of algal lipids by molecular breeding of algae is required for practical use. In the present study, we developed a highly efficient genome-editing system involving Platinum transcription activator-like effector nucleases (TALENs) in Nannochloropsis oceanica. Platinum TALENs codon-optimized for N. oceanica were synthesized, and their DNA-binding activity was confirmed by single-strand annealing assays in human HEK293T cells. All-in-one expression vectors for Platinum TALEN targeting the nitrate reductase gene, NoNR, and acyltransferase gene, LPAT1, were transfected into Nannochloropsis species. The introduction of each Platinum TALEN revealed high genome-editing efficiency with no detectable off-target mutations at the candidate sites in N. oceanica. By simultaneously introducing TALENs targeting two genes, we obtained double mutant strains. The loss-of-function phenotype of NoNR was also confirmed. These findings will provide an essential technology for molecular breeding in Nannochloropsis species.

The Potential of Algal Biotechnology to Produce Antiviral Compounds and Biopharmaceuticals

The emergence of the Coronavirus Disease 2019 (COVID-19) caused by the SARS-CoV-2 virus has led to an unprecedented pandemic, which demands urgent development of antiviral drugs and antibodies; as well as prophylactic approaches, namely vaccines. Algae biotechnology has much to offer in this scenario given the diversity of such organisms, which are a valuable source of antiviral and anti-inflammatory compounds that can also be used to produce vaccines and antibodies. Antivirals with possible activity against SARS-CoV-2 are summarized, based on previously reported activity against Coronaviruses or other enveloped or respiratory viruses. Moreover, the potential of algae-derived anti-inflammatory compounds to treat severe cases of COVID-19 is contemplated. The scenario of producing biopharmaceuticals in recombinant algae is presented and the cases of algae-made vaccines targeting viral diseases is highlighted as valuable references for the development of anti-SARS-CoV-2 vaccines. Successful cases in the production of functional antibodies are described. Perspectives on how specific algae species and genetic engineering techniques can be applied for the production of anti-viral compounds antibodies and vaccines against SARS-CoV-2 are provided.

Molecular tools and applications of Euglena gracilis: From biorefineries to bioremediation

Euglena gracilis is a promising source of commercially important metabolites such as vitamins, wax esters, paramylon, and amino acids. However, the molecular tools available to create improved Euglena strains are limited compared to other microorganisms that are currently exploited in the biotechnology industry. The complex poly-endosymbiotic nature of the Euglena genome is a major bottleneck for obtaining a complete genome sequence and thus represents a notable shortcoming in gaining molecular information of this organism. Therefore, the studies and applications have been more focused on using the wild-type strain or its variants and optimizing the nutrient composition and cultivation conditions to enhance the production of biomass and valuable metabolites. In addition to producing metabolites, the E. gracilis biorefinery concept also provides means for the production of biofuels and biogas as well as residual biomass for the remediation of industrial and municipal wastewater. Using Euglena for bioremediation of environments contaminated with heavy metals is of special interest due to the strong ability of the organism to accumulate and sequester these compounds. The published draft genome and transcriptome will serve as a basis for further molecular studies of Euglena and provide a guide for the engineering of metabolic pathways of relevance for the already established as well as novel applications.

Genetic Engineering Strategies for Euglena gracilis and Its Industrial Contribution to Sustainable Development Goals: A Review

The sustainable development goals (SDGs) adopted at the 2015 United Nations Summit are globally applicable goals designed to help countries realize a sustainable future. To achieve these SDGs, it is necessary to utilize renewable biological resources. In recent years, bioeconomy has been an attractive concept for achieving the SDGs. Microalgae are one of the biological resources that show promise in realizing the "5F"s (food, fiber, feed, fertilizer, and fuel). Among the microalgae, Euglena gracilis has the potential for achieving the "5F"s strategy owing to its unique features, such as production of paramylon, that are lacking in other microalgae. E. gracilis has already been produced on an industrial scale for use as an ingredient in functional foods and cosmetics. In recent years, genetic engineering methods for breeding E. gracilis have been researched and developed to achieve higher yields. In this article, we summarize how microalgae contribute toward achieving the SDGs. We focus on the contribution of E. gracilis to the bioeconomy, including its advantages in industrial use as well as its unique characteristics. In addition, we review genetic engineering-related research trends centered on E. gracilis, including a complete nuclear genome determination project, genome editing technology using the CRISPR-Cas9 system, and the development of a screening method for selecting useful strains. In particular, genome editing in E. gracilis could be a breakthrough for molecular breeding of industrially useful strains because of its high efficiency.

Highly Efficient CRISPR-Associated Protein 9 Ribonucleoprotein-Based Genome Editing in Euglena gracilis

Euglena gracilis, a unicellular phytoflagellate microalga, is a promising biomaterial for foods, feeds, and biofuels. However, targeted mutagenesis in this species has been a long-standing challenge. We recently developed a transgene-free, highly efficient, genome editing method for E. gracilis using CRISPR/Cas9 ribonucleoproteins (RNPs). Our method achieved mutagenesis rates of approximately 80% or more through an electroporation-based direct delivery of Cas9 RNPs. Therefore, this method is suitable for basic research and industrial applications, such as the breeding of Euglena.

For complete details on the use and execution of this protocol, please refer to Nomura et al. (2019).

•

Protocol for an efficient genome editing method using Cas9 RNPs in Euglena gracilis

•

Transgene-free targeted mutagenesis is possible via direct delivery of Cas9 RNPs

•

Highly efficient knock-in of short sequences into the target site is possible

The Microalgae Biorefinery: A Perspective on the Current Status and Future Opportunities Using Genetic Modification

There is clear scientific evidence that emissions of greenhouse gases (GHG), arising from fossil fuel combustion and land-use change as a result of human activities, are perturbing the Earth’s climate. Microalgae-derived biofuels have been chased since the 1980s without success but, lately, a new biorefinery concept is receiving increasing attention. Here, we discuss the possible solutions to the many problems that make this process unrealised to date, considering also the possibility of including genetically modified (GM) organisms to improve the productivity and process economics. Currently, unless coupled to a service or higher value product production, biofuels derived from microalgae fail to achieve economic reality. However, provided sufficient development of new technologies, potentially including new or improved organisms to lower both production and processing costs, as well as looking at the utility of distributed versus centralised production models, algae biofuels could achieve an impact, off-setting our heavy reliance on petroleum-based liquid fuels.