Nanoflower-like Yttrium-doped ZnO Photocatalyst for the Degradation of Methylene Blue Dye

Green-route synthesis and ab-initio studies of a highly efficient nano photocatalyst:Ce/zinc-oxide nanopetals

In the present work, Zinc-oxide nanostructures and Ce/Zinc-oxide nanopetals were synthesized by a new environmentally friendly green synthesis method using the Withania coagulans plant. Cerium nitrate Ce(NO3)3 and zinc nitrate Zn(NO3)2 were used as precursors. The prepared nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and ultraviolet spectroscopy (UV-vis). Crystal planes (100), (002), (101), (102), (110), (103), (200), (112) and (201) at 2θ 31.75°, 34.35°, 36.2°, 47.55°, 56.6°, 62.75°, 66.3°, 67.9°, and 69.09° respectively confirmed the hexagonal wurtzite crystal structure of Zinc-oxide. Angular shifts for Ce1% doped Zinc-oxide and Ce3% doped Zinc-oxide nanopetal nanostructures were observed in the (100) and (101) planes of the crystal. More specifically, using Scherrer's equation, the crystallite sizes of Zinc-oxide, Ce1% doped Zinc-oxide nanopetals, Ce3% doped Zinc-oxide nanopetals, and Ce5% doped Zinc-oxide nanopetals were 16.48 ± 02 nm, 17.8 ± 2 nm, 18.8 ± 2 nm, and 18.87 ± 2 nm, respectively. The pure Zinc-oxide grain had the appearance of a nanoflower. On the other hand, the nanopetal structure of Ce5% doped Zinc-oxide nanopetals had oval-shaped nanopetal morphology. The absorption peaks were observed at 373, 376.4, 377, and 378 nm for Zinc-oxide, Ce1% doped Zinc-oxide nanopetals, Ce3% doped Zinc-oxide nanopetals, and Ce5% doped Zinc-oxide nanopetals, respectively, which results in a progressive redshift. The gap energies of Zinc-oxide, Ce1% doped Zinc-oxide nanopetals, Ce3% doped Zinc-oxide nanopetals, and Ce5% doped Zinc-oxide nanopetals were 2.796, 2.645, 2.534, and 2.448 eV, respectively. Photodegradation under visible light (>400 nm) indicates the high efficiency of the photocatalyst based on Ce5% doped Zinc-oxide nanopetals. DFT calculations, structural changes, charge analysis, and electronic band structures were carried out to confirm the experiment.

Multiple phases of yttrium-doped molybdenum trioxide nanorods as efficient dye degrader and bactericidal agents with molecular docking analysis

Contaminants removal is usually becoming an exciting subject of research from water considering their environmental and ecological effects. This work provides pathways to remove organic pollutants from water via nanomaterials and is used as an antibiotic against bacteria like Escherichia coli (E. coli). In this study, molybdenum trioxide (MoO3) and yttrium (Y) doped (2 and 4%) MoO3 nanorods were synthesized by co-precipitation method. Advanced characterization techniques have been introduced to study textural structures, morphological developments, and optical characteristics of produced products. X-ray diffraction studied multiple crystalline structures of prepared samples as hexagonal, orthorhombic, and monoclinic of pure MoO3 with decrease in crystallinity and crystallite size upon Y doping. UV-visible spectroscopy unveiled a redshift (bathochromic effect) in absorption pattern attributed to band gap energy (Eg) decreases. Photoluminescence spectra examined the recombination rate of electrons (e-) and holes (h+) as charge carriers. A sufficient catalytic activity (CA) was observed against methylene blue (MB) dye in an acidic medium (99.74%) and efficient bactericidal action was studied against (E. coli) with zone of inhibition (5.20 mm) for 4% Y-doped MoO3. In addition, in silico docking demonstrated potential inhibitory effect of produced nanomaterials on FabH and FabI enzymes of fatty acid biosynthesis.

Emerging aspects of metal ions-doped zinc oxide photocatalysts in degradation of organic dyes and pharmaceutical pollutants - A review

In recent periods, a broad assortment of continual organic contaminants has been released into our natural water resources. Indeed, it is exceedingly poisonous and perilous to living things; thus, the elimination of these organic pollutants before release into the water bodies is vital. A variety of techniques have been utilized to remove these organic pollutants with advanced oxidation photocatalytic methods with zinc oxide (ZnO) nanoparticles being commonly used as a capable catalyst for contaminated water treatment. Nevertheless, its broad energy gap, which can be only stimulated under an ultraviolet (UV) light source, and high recombination pairs of electrons and holes limit their photocatalytic behaviors. However, numerous methods have been suggested to decrease its energy gap for visible regions. Including, the doping ZnO with metal ions (dopant) can be considered as an effectual route not only the reason for a movement of the absorption edges toward the higher (visible light) region but also to lower the electron-hole pair (e--h+) recombination. This review concentrated on the impact of dissimilar types of metal ions (dopants) on the advancement in the degradation performance of ZnO. So, this work demonstrates a vital review of contemporary attainments in the alteration of ZnO nanoparticles for organic pollutants eliminations. Besides, the effect of doping ions including transition metals, rare earth metals, and metal ions (substitutional and interstitial) concerning numerous types of altered ZnO are summarized. The photodegradation mechanisms for pristine and metal-modified ZnO nanoparticles are also conferred.

Enhanced Industrial Dye Degradation and Antibacterial Activity Supported by the Molecular Docking Study of Yttrium and Carbon Sphere-Doped Lanthanum Oxide Nanostructures

As the population grows, the scientific community remains focused on researching new materials, methods, and devices to ensure the availability of safe drinking water. The main aim of this research was to decrease the recombination rate of the charge carriers of La2O3 and enhance the catalytic and antimicrobial activity by employing Y/Cs- doped La2O3, respectively. In the current study, different concentrations of yttrium (Y) and a fixed amount of carbon spheres (Cs) doped into lanthanum oxide (La2O3) nanostructures (NSs) were synthesized by the coprecipitation technique. Cs are used as a cocatalyst as they have a high surface area and small size attributed to increased active sites and decreased recombination rate. Moreover, Y was further incorporated as it activates the generation of reactive oxygen species in the inhibition zone, enhancing the antibacterial activity and reducing the emission intensity. Advanced techniques were utilized to determine the structural properties, optical emission and absorption, elemental composition, and d-spacing of the synthesized samples. The reported ternary catalyst works efficiently, improving the catalytic activity and bactericidal potential. Moreover, in silico molecular docking studies, Cs-doped La2O3 and Y/Cs-doped La2O3 nanostructures toward DNA gyrase Escherichia coli showed good efficacy for antibacterial activity.

Gamma irradiation induced surface modification of (PVC/HDPE)/ZnO nanocomposite for enhancing the oil removal and conductivity using COMSOL multiphysics

Blend nanocomposite film was prepared by loadings of irradiated ZnO in ratios of (5 wt%) inside the PVC/HDPE matrix using a hot-melt extruder technique. The physical and chemical properties of the irradiated and unirradiated ZnO samples are compared. The Vis-UV spectrum of ZnO shows an absorption peak at a wavelength of 373 nm that was slightly red-shifted to 375 nm for an irradiated sample of ZnO at a dose of 25 kGy due to the defect of crystal structure by the oxygen vacancy during gamma irradiations. This growth of the defect site leads to a decrease in energy gaps from 3.8 to 2.08 eV. AC conductivity of ZnO sample increased after the gamma irradiation process (25 kGy). The (PVC/HDPE)/ZnO nanocomposites were re-irradiated with γ rays at 25 kGy in the presence of four different media (silicon oil, sodium silicate, paraffin wax and water). FTIR and XRD were performed to monitor the changes in chemical composition. The new peak at 1723 cm^-1 attributed to C=O groups was observed in irradiated (PVC/HDPE)ZnO samples at only sodium silicate and water media. This process induced new function groups on the surface of the (PVC/HDPE)/ZnO blend sample. This work aims to develop (PVC/HDPE)ZnO for oil/water separation. The highest oil adsorption capability was observed in samples functionalized by C=O groups based on the different tested oils. The results suggest that the surface characterization of the (PVC/HDPE)/ZnO can be modified to enhance the oil adsorption potential. Further, the gamma irradiation dose significantly enhanced the AC conductivity compared to the unirradiated sample. According to COMSOL Multiphysics, the irradiated sample (PVC/HDPE)ZnO in water shows perfect uniform electric field distribution in medium voltage cables (22.000 V).

Multifunctional Oil Absorption with Macroporous Polystyrene Fibers Incorporating Silver-Doped ZnO

Hydrophobic microporous polystyrene (PS) fibers are fabricated by a solvent-induced phase-separation-assisted electrospinning method. Zinc oxide (ZnO) and silver-doped zinc oxide (Ag-ZnO) nanomaterials with variable morphologies are added to the PS fibers, to investigate the influence of multifunctional nanofiller addition on the porosity and consequent oil-adsorbing properties for different oil types. The doping of silver as well as the uniformity in particle distribution are confirmed by scanning electron microscopy and the energy-dispersive spectral analyses. The porosity of the fibers and their crystallinity effect depend on the hydrophobicity and surface properties of these microporous nanofilled fibers. Ag-ZnO, specifically in 2 wt %, enhanced the pore size and distribution in PS porous fibers, thereby enhancing the oil-adsorbing property and its hydrophobicity. In-depth analysis of the oil adsorption mechanism is done for the fibers, both qualitatively and quantitatively, to demonstrate its correlation with the structural integrity of the fibers. The PS/2Ag-ZnO composite also exhibits the highest antibacterial performance against Staphylococcus aureus, a general indication of antibiological fouling properties of these oil-separating films. The antifouling/antibacterial activity of the nanoparticles and high oil sorption capacity of the highly porous PS composites show great potential for use in water-treatment-related applications.

Sm3+ driven enhancement in photocatalytic degradation of hazardous dyes and photoluminescence properties of hexagonal-ZnO nanocolumns

Samarium doped ZnO (Sm-ZnO) nanocolumns were grown by wet chemical method and the doping effect of Sm3+ on visible light photocatalytic (PC) and photoluminescence (PL) properties of ZnO was investigated. Methylene blue (MB) and methyl orange (MO) were considered for the degradation study as a step initiated towards the remediation of industrial wastewater. Subsequent characterization studies by x-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) enumerate that the hexagonal-wurtzite structured Sm-ZnO is highly crystalline in nature and possesses hexagonal column like nano-architectures. Although, a charge imbalance exists between the ions, the substitutional effects of Sm3+ at Zn2+ sites have been observed from the XRD spectra and discussed by suitable mechanisms. FTIR measurement gives the information on the evolution of peaks related to metal-oxygen bond in Sm-ZnO which may be linked with Sm ions. PC measurement shows that the degradation efficiency of 95% can be achieved by Sm-ZnO photocatalysts in degrading MB and 91% for MO. Sm doping induces high charge separation efficiency and generation of OH ions in ZnO leading to such improvisation in degradation efficiency. The prepared Sm-ZnO nanocatalysts possess high degree of photostability and reusability even after fourth cycle of photodegradation. PL spectra show the suppression of the sharp and intense excitonic emission band of ZnO in Sm-ZnO due to low rated direct recombination of carriers. Incorporation of Sm3+ ends up with intrinsic defect mediated enhancement in the visible emissions especially in the blue, yellow and red region of light spectrum.

Polymer Nanocomposite-based Coatings for Corrosion Protection

Corrosion of metals induces enormous loss of material performance and increase of cost, which has been a common and intractable issue that needs to be addressed urgently. Coating technology has been acknowledged to be the most economic and efficient approach to retard the metal corrosion. For several decades, polymers have been recognized as an effective anticorrosion coating material in both industries and scientific communities, as they demonstrate good barrier properties, ease of altering properties and massive production. Nanomaterials show distinctively different physical and chemical properties compared with their bulk counterparts, which have been considered as highly promising functional materials in various applications, impacting virtually all the fields of science and technologies. Recently, the introduction of nanomaterials with various properties into polymer matrix to form a polymer nanocomposite has been devoted to improve anticorrosive ability of polymer coatings. In this review article, we highlight the recent advances and synopsis of these high-performance polymer nanocomposites as anticorrosive coating materials. We expect that this work could be helpful for the researchers who are interested in the development of functional nanomaterials and advanced corrosion protection technology.

Investigation of the structural, optical and gas sensing properties of PANI coated Cu-ZnS microsphere composite

Polyaniline (PANI)/Cu–ZnS composites with porous microspheres are prepared by a hydrothermal and in situ polymerization method. The structural, optical, and morphological properties are characterized by X-ray powder diffraction, FTIR, UV-vis, scanning electron microscope, transmission electron microscope. The XRD results confirmed that the PANI/Cu–ZnS composite is formed. The morphological analyses exhibited that the PANI/Cu–ZnS composite comprises the porous microspherical structures. The emission peaks obtained in photoluminescence spectra confirm the presence of surface defects in the prepared composite. The UV-DRS study shows that the bandgap of the samples is found to decrease for the PANI/Cu–ZnS composite compared to the pure Cu–ZnS sample. The calculated band gap (E_g) value of PANI/Cu–ZnS composite is 2.47 eV. Furthermore, the fabricated gas sensor based on PANI/Cu–ZnS can perform at room temperature and exhibits good gas sensing performance toward CO₂ gas. In particular, PANI/Cu–ZnS sensor shows good response (31 s) and recovery time (23 s) upon exposure to CO₂ gas. The p/n heterojunction, surface defects, and porous nature of the PANI/Cu–ZnS composite microsphere enhanced sensor performance.

Polyaniline (PANI)/Cu–ZnS composites with porous microspheres are prepared by a hydrothermal and in situ polymerization method.

Solar light harvest: modified d-block metals in photocatalysis

With solar light, modified d-block metal photocatalysts are useful in areas where electricity is insufficient, with its chemical stability during the photocatalytic process, and its low-cost and nontoxicity.

Synthesis, optimization and applications of ZnO/polymer nanocomposites

Polymer composites have established an excellent position among the technologically essential materials because of their wide range of applications. An enormous research interest has been devoted to zinc oxide (ZnO) based polymer nanocomposites, due to their exceptional electrical, optical, thermal, mechanical, catalytic, and biomedical properties. This article provides a review of various polymer composites consisting of ZnO nanoparticles (NPs) as reinforcements, exhibiting excellent properties for applications such as the dielectric, sensing, piezoelectric, electromagnetic shielding, thermal conductivity and energy storage. The preparation methods of such composites including solution blending, in situ polymerization, and melt intercalation are also explained. The current challenges and potential applications of these composites are provided in order to guide future progress on the development of more promising materials. Finally, a detailed summary of the current trends in the field is presented to progressively show the future prospects for the development of ZnO containing polymer nanocomposite materials.

Investigation on the effect of γ-irradiation on the dielectric and piezoelectric properties of stretchable PVDF/Fe-ZnO nanocomposites for self-powering devices

Stretchable films of PVDF nanocomposites containing iron doped ZnO (Fe-ZnO) nanoflowers are fabricated following simple solution mixing and γ-irradiation treatment. An increase in β-phase crystallinity is noticed for the PVDF/Fe-ZnO nanocomposite when compared to PVDF/ZnO at the same filler concentration. Specifically, at 1 wt%, the relative crystallinity of the composite containing Fe-ZnO calculated from FTIR is 48.1%, while for ZnO, it is 40.9%. A dielectric constant of 96 is reached for PVDF/Fe-ZnO at 2 wt%, in addition to a peak to peak output piezoelectric voltage of 2.4 V. This is several times higher than that observed for PVDF/ZnO nanocomposites and those fabricated without γ-irradiation (1.1 V). Piezoelectric voltage generation is also observed during the stretching, bending and rolling vibrational movements of the sample, indicating its possible use in flexible electronic devices. The observed superior performance of the PVDF/Fe-ZnO system is attributed to the influence of the star like morphology and dispersion of Fe-ZnO, and the enhanced filler-polymer interaction and crosslink formation by the γ-irradiation process. It is demonstrated that such a system can be applicable in manufacturing piezoelectric nanogenerators for various industrial applications including robotic parts, biomedical devices etc.

Tetracycline Removal Under Solar Illumination Over Ag3 VO4 /mpg-C3 N4 Heterojunction Photocatalysts

Ag₃ VO₄ /mpg-C₃ N₄ (mesoporous graphitic carbon nitride) heterojunction photocatalysts were prepared by anchoring tiny Ag₃ VO₄ particles on the nanosheet of mpg-C₃ N₄ . The prepared Ag₃ VO₄ /mpg-C₃ N₄ heterojunctions were used to remove tetracycline (TC), a kind of antibiotics widely released into the aquatic environment under solar irradiation. Compared with pure mpg-C₃ N₄ and Ag₃ VO₄ , Ag₃ VO₄ /mpg-C₃ N₄ displayed much higher photocatalytic activity (83.2% removal rate within 90 min under visible-light irradiation). Importantly, no apparent deactivation was observed for Ag₃ VO₄ /mpg-C₃ N₄ -40 after five cycles, inferring a good reusability. As confirmed by photocurrent measurement and photoluminescence spectra, the excellent photocatalytic property of Ag₃ VO₄ /mpg-C₃ N₄ was credit to the electron-hole separation enhancement at the formed heterojunction of two semiconductors. In addition, a possible mechanism and intermediate products for the Ag₃ VO₄ /mpg-C₃ N₄ photocatalysts toward the photodegradation of TC in aqueous solution under artificial sunlight radiation were proposed based on the scavengers trapping test, ESR spectra and a high-performance liquid chromatography (HPLC) coupled with mass spectrometer (MS) analysis. This investigation provides a low cost, green and easily practical approach to remove the antibiotics in the aquatic environment.