The potential of quantitative models to improve microalgae photosynthetic efficiency

Assessment of photosynthetic activity in dense microalgae cultures using oxygen production

Microalgae are photosynthetic microorganisms playing a pivotal role in primary production in aquatic ecosystems, sustaining the entry of carbon in the biosphere. Microalgae have also been recognized as sustainable source of biomass to complement crops. For this objective they are cultivated in photobioreactors or ponds at high cell density to maximize biomass productivity and lower the cost of downstream processes. Photosynthesis depends on light availability, that is often not constant over time. In nature, sunlight fluctuates over diurnal cycles and weather conditions. In high-density microalgae cultures of photobioreactors outdoors, on top of natural variations, microalgae are subjected to further complexity in light exposure. Because of the high-density cells experience self-shading effects that heavily limit light availability in most of the mass culture volume. This limitation strongly affects biomass productivity of industrial microalgae cultivation plants with important implications on economic feasibility. Understanding how photosynthesis responds to cell density is informative to assess functionality in the inhomogeneous light environment of industrial photobioreactors. In this work we exploited a high-sensitivity Clark electrode to measure microalgae photosynthesis and compare cultures with different densities, using Nannochloropsis as model organism. We observed that cell density has a substantial impact on photosynthetic activity, and demonstrated the reduction of the cell's light-absorption capacity by genetic modification is a valuable strategy to increase photosynthetic functionality on a chlorophyll-basis of dense microalgae cultures.

The cytotoxicity of nano- and micro-sized graphene oxides on microalgae depends on the characteristics of cell wall and flagella

Cytotoxic effects of emerging contaminants in aquatic environments have been widely studied using diverse microalgal species. However, the role of microalgal characteristics such as presence/absence of cell wall or flagella on cytotoxicity of contaminants was not elucidated yet. In this study, four different Chlamydomonas reinhardtii strains that have different characteristics were used to confirm how these characteristics affect toxicity of contaminants, nano-/micro-sized graphene oxide (GO). The nano-sized GO inhibited the growth of cell wall-deficient strains and reduced the photosynthetic activity. The micro-sized GO inhibited the growth of all strains, but the inhibition efficiency was higher in flagella-deficient strains, indicating that cell wall and flagella have different roles in response to contaminant exposure. The electron microscopy analysis demonstrated that nano-sized GO caused the cell rupture in cell wall-deficient strains. In flagella-deficient strains, the nano- and micro-sized GOs were parallelly attached on the surface of cells, covering the cells. The wrapping of flagella-deficient cells by GO led to the increase of reactive oxygen species (ROS) contents. These results indicate main cytotoxic mechanism of nano-sized GO was the membrane damage of cells, and the presence of cell wall can protect the cells from the attack of nano-sized GO. On the one hand, the presence of flagella might help to avoid the attachment of GO while the cell proliferation and photosynthesis were inhibited in flagella-deficient cells due to the GO wrapping. Overall, given that different microalgal species have different characteristics and these characteristics might affect the cytotoxic effect of the contaminants, it is of great importance to consider the characteristics of test microalgal species when evaluating the cytotoxic mechanism of the nano-/micro-sized pollutants.

Establishment of ultrasonic stimulation to enhance growth of Haematococcus lacustris

In this study, ultrasonication at a frequency of 40 kHz was used to shorten the sonication period and enhance the growth of Haematococcus lacustris. To confirm the optimal conditions, the effects of ultrasound output and treatment interval were examined. Under optimal conditions (20 W and 15-day cycle), the maximum cell density and chlorophyll content were 66.75 × 10⁴ cells mL^-1 and 36.54 mg g^-1, respectively, which were increased by 50.00% and 39.01%, respectively, compared to the control. Transmission electron microscopy analysis showed that ultrasonication caused tiny cracks in the W4 and W6 strata but did not disrupt the inner W2 layer. Additionally, RT-qPCR analysis showed that ultrasonication upregulated both cell division and nitrogen uptake. No difference were detected in the composition or quantity of fatty acids. This study demonstrates a novel ultrasonic approach for enhancing the growth of H. lacustris.

Sustainability and carbon neutrality trends for microalgae-based wastewater treatment: A review

As the global economy develops and the population increases, greenhouse gas emissions and wastewater discharge have become inevitable global problems. Conventional wastewater treatment processes produce direct or indirect greenhouse gas, which can intensify global warming. Microalgae-based wastewater treatment technology can not only purify wastewater and use the nutrients in wastewater to produce microalgae biomass, but it can also absorb CO₂ in the atmosphere or flue gas through photosynthesis, which demonstrates great potential as a sustainable and economical wastewater treatment technology. This review highlights the multifaceted roles of microalgae in different types of wastewater treatment processes in terms of the extent of their bioremediation function and microalgae biomass production. In addition, various newly developed microalgae cultivation systems, especially biofilm cultivation systems, were further characterized systematically. The performance of different microalgae cultivation systems was studied and summarized. Current research on the technical approaches for the modification of the CO₂ capture by microalgae and the maximization of CO₂ transfer and conversion efficiency were also reviewed. This review serves as a useful and informative reference for the application of wastewater treatment and CO₂ capture by microalgae, aiming to provide a reference for the realization of carbon neutrality in wastewater treatment systems.

Microalgae Bioactive Compounds to Topical Applications Products-A Review

Microalgae are complex photosynthetic organisms found in marine and freshwater environments that produce valuable metabolites. Microalgae-derived metabolites have gained remarkable attention in different industrial biotechnological processes and pharmaceutical and cosmetic industries due to their multiple properties, including antioxidant, anti-aging, anti-cancer, phycoimmunomodulatory, anti-inflammatory, and antimicrobial activities. These properties are recognized as promising components for state-of-the-art cosmetics and cosmeceutical formulations. Efforts are being made to develop natural, non-toxic, and environmentally friendly products that replace synthetic products. This review summarizes some potential cosmeceutical applications of microalgae-derived biomolecules, their mechanisms of action, and extraction methods.

Can polymer-degrading microorganisms solve the bottleneck of plastics' environmental challenges?

Increasing world population and industrial activities have enhanced anthropogenic pollution, plastic pollution being especially alarming. So, plastics should be recycled and/or make them biodegradable. Chemical and physical remediating methods are usually energy consuming and costly. In addition, they are not ecofriendly and usually produce toxic byproducts. Bioremediation is a proper option as it is cost-efficient and environmentally friendly. Plastic production and consumption are increasing daily, and, as a consequence, more microorganisms are exposed to these nonbiodegradable polymers. Therefore, investigating new efficient microorganisms and increasing the knowledge about their biology can pave the way for efficient and feasible plastic bioremediation processes. In this sense, omics, systems biology and bioinformatics are three important fields to analyze the biodegradation pathways in microorganisms. Based on the above-mentioned technologies, researchers can engineer microorganisms with specific desired properties to make bioremediation more efficient.

Knowledge of Regulation of Photosynthesis in Outdoor Microalgae Cultures Is Essential for the Optimization of Biomass Productivity

Microalgae represent a sustainable source of biomass that can be exploited for pharmaceutical, nutraceutical, cosmetic applications, as well as for food, feed, chemicals, and energy. To make microalgae applications economically competitive and maximize their positive environmental impact, it is however necessary to optimize productivity when cultivated at a large scale. Independently from the final product, this objective requires the optimization of biomass productivity and thus of microalgae ability to exploit light for CO₂ fixation. Light is a highly variable environmental parameter, continuously changing depending on seasons, time of the day, and weather conditions. In microalgae large scale cultures, cell self-shading causes inhomogeneity in light distribution and, because of mixing, cells move between different parts of the culture, experiencing abrupt changes in light exposure. Microalgae evolved multiple regulatory mechanisms to deal with dynamic light conditions that, however, are not adapted to respond to the complex mixture of natural and artificial fluctuations found in large-scale cultures, which can thus drive to oversaturation of the photosynthetic machinery, leading to consequent oxidative stress. In this work, the present knowledge on the regulation of photosynthesis and its implications for the maximization of microalgae biomass productivity are discussed. Fast mechanisms of regulations, such as Non-Photochemical-Quenching and cyclic electron flow, are seminal to respond to sudden fluctuations of light intensity. However, they are less effective especially in the 1-100 s time range, where light fluctuations were shown to have the strongest negative impact on biomass productivity. On the longer term, microalgae modulate the composition and activity of the photosynthetic apparatus to environmental conditions, an acclimation response activated also in cultures outdoors. While regulation of photosynthesis has been investigated mainly in controlled lab-scale conditions so far, these mechanisms are highly impactful also in cultures outdoors, suggesting that the integration of detailed knowledge from microalgae large-scale cultivation is essential to drive more effective efforts to optimize biomass productivity.

Biomolecular characterisation of marine microalga in comparison to fishmeal and soymeal as an alternative feed ingredient

INTRODUCTION

Marine microalgae protein has better solubility and digestibility than other protein-based feeds. Apart from protein, high-value biomolecules have an immense potential to enhance the quality of feed, but knowledge about them is scarce.

OBJECTIVE

Marine microalga Picochlorum sp. biomass molecular characterisation along with commonly used protein feed such as fishmeal and soymeal for potential feed ingredients.

METHODOLOGY

Liquid chromatography coupled with mass spectrometry (LC-MS) was used for biomolecular characterisation. The correlation of biomolecules sets was evaluated using principal component analysis (PCA) and heatmap clustering.

RESULTS

LC-MS identified 116 biomolecules cumulatively among microalga, fishmeal, and soymeal that includes fatty acids, acylglycerols, vitamins, sterols, pigments, nucleotides, unique amino acids, amines, sugars and miscellaneous. These 116 biomolecules were screened based on their functional importance as feed ingredients. Among the different sets of biomolecules, microalga contained a more diverse set of fatty acids, pigments, sterols, and vitamins than acylglycerols, unique amino acids, nucleotides, and sugars. Fishmeal contained a more diverse set of acylglycerols, unique amino acids, nucleotides, and amines, while soymeal contained the highest number of sugars and miscellaneous biomolecules. The PCA confirmed the significance level (P > 95%) and heatmap clustering showed the diversity and relatedness of biomolecules among the microalga, fishmeal, and soymeal.

CONCLUSION

This study showed that the marine microalga Picochlorum sp. biomass has a rich source of biomolecules and could complement fishmeal or soymeal in feed and is also sustainable and economical as compared to fishmeal and soymeal.

Emerging microalgae-based technologies in biorefinery and risk assessment issues: Bioeconomy for sustainable development

Industrial wastewater treatment is of paramount importance considering the safety of the aquatic ecosystem and its associated health risk to humankind inhabiting near the water bodies. Microalgae-based technologies for remediation of environmental pollutants present avenues for bioenergy applications and production of value-added biochemicals having pharmaceutical, nutraceutical, antioxidants, carbohydrate, phenolics, long-chain multi-faceted fatty acids, enzymes, and proteins which are considered healthy supplements for human health. Such a wide range of products put up a good case for the biorefinery concept. Microalgae play a pivotal role in degrading complex pollutants, such as organic and inorganic contaminants thereby efficiently removing them from the environment. In addition, microalgal species, such as Botryococcus braunii, Tetraselmis suecica, Phaeodactylum tricornutum, Neochloris oleoabundans, Chlorella vulgaris, Arthrospira, Chlorella, and Tetraselmis sp., etc., are also reported for generation of value-added products. This review presents a holistic view of microalgae based biorefinery starting from cultivation and harvesting of microalgae, the potential for remediation of environmental pollutants, bioenergy application, and production of value-added biomolecules. Further, it summarizes the current understanding of microalgae-based technologies and discusses the risks involved, potential for bioeconomy, and outlines future research directions.

Outdoor cultivation of a novel isolate of the microalgae Scenedesmus sp. and the evaluation of its potential as a novel protein crop

A Danish strain of the green microalgae Scenedesmus sp. was isolated, identified and characterized with respect to productivity under outdoor cultivation conditions at northern latitudes. The algae were cultivated outdoors in Denmark in closed tubular photobioreactors using only sunlight, simple inorganic nutrients and under ambient temperatures. The biomass composition was evaluated in terms of protein content and quality. The average volumetric and areal biomass productivity obtained for the Scenedesmus sp. isolate during outdoor cultivation was 0.083 g dry matter L^-1 and 6.40 g dm m^-2  day^-1 , respectively. Thus, productivities are comparable to data reported in the literature under similar conditions. A strain-specific nitrogen to protein conversion factor of 5.5 was determined for the Scenedesmus sp. strain enabling more accurate protein estimations from simple nitrogen determination methods like Kjeldahl analysis in the future. The protein content was determined to be 52.4% of dried biomass for this Scenedesmus strain. The sum of essential amino acids was 42% which is high compared to other microalgae. The results are compared and discussed in comparison to other microalgae and soybean as a common plant protein source.

Lipids from Microalgae for Cosmetic Applications

In recent years, there has been considerable interest in using microalgal lipids in the food, chemical, pharmaceutical, and cosmetic industries. Several microalgal species can accumulate appreciable lipid quantities and therefore are characterized as oleaginous. In cosmetic formulations, lipids and their derivatives are one of the main ingredients. Different lipid classes are great moisturizing, emollient, and softening agents, work as surfactants and emulsifiers, give consistence to products, are color and fragrance carriers, act as preservatives to maintain products integrity, and can be part of the molecules delivery system. In the past, chemicals have been widely used but today’s market and customers’ demands are oriented towards natural products. Microalgae are an extraordinary source of lipids and other many bioactive molecules. Scientists’ attention to microalgae cultivation for their industrial application is increasing. For the high costs associated, commercialization of microalgae and their products is still not very widespread. The possibility to use biomass for various industrial purposes could make microalgae more economically competitive.

A review of high value-added molecules production by microalgae in light of the classification

This work reviews applications of high added value molecules produced from microalgae. Older forms of valorization - health food and quality feed, polyunsaturated fatty acids, pigments, carbohydrates - are currently penetrating their markets. They are driven by desirable properties: texturer and dye for food industry, antioxidant for cosmetics and the appetite of the general public for biosourced compounds. Most recent developments, such as peptides, vitamins, polyphenols, phytosterols and phytohormones, are struggling to meet their market and reach economical competitiveness. Still they are pushed forward by the very powerful driver that is pharmaceutical industry. In addition this work also proposes to link microalgae phyla and related potential applications. This is done through highlighting of which bioactive compounds can be found in which phyla. While some seem to be restricted to aquaculture, Cyanobacteria, Chlorophyta and Rhodophyta show great promises.

Influence of Nitrogen Source and Growth Phase on Extracellular Biosynthesis of Silver Nanoparticles Using Cultural Filtrates of Scenedesmus obliquus

In this study, silver nanoparticles (AgNPs) were green-synthesized extracellularly by the action of bioactive compounds in cultural filtrates of green microalga Scenedesmus obliquus (KY621475). The influences of six different nitrogen sources (i.e., NaNO3, CO(NH4)2, (NH4)2CO3, KNO3, NH4NO3, and (NH4)2SO4) on extracellular biosynthesis of AgNPs were observed by UV–Visible spectroscopy (380–425 nm) and confirmed using high-resolution transmission electron microscopy (HRTEM). The highest biomass production was observed in the case of urea and ammonium carbonate treatments, which, surprisingly, showed negative activity for AgNPs biosynthesis. Considering their coupling and compatible presence in cultural filtrates, reductases (especially nitrate reductase) as reduction agents are assumed to play a key role in the extracellular biosynthesis of AgNPs. The cultural filtrates of the potassium and sodium nitrate treatments produce AgNPs of relatively small size (5–10 and 4–10 nm, respectively), smaller than those produced by filtrate of ammonium nitrate treatment. The antimicrobial activity of produced AgNPs was a function mainly of particle size, which was influenced by the nitrogen source of the microalgal culture. The AgNPs produced from the KNO3 and NaNO3 cultural filtrates performed the best as antimicrobial agents.