Gastrocnemius Medialis and Vastus Lateralis in vivo muscle‐tendon behavior during running at increasing speeds

Running 40 Minutes under Temperate or Hot Environment Does Not Affect Operating Fascicle Length

PURPOSE

Muscle mechanics is paramount in our understanding of motor performance. However, little is known regarding the sensitivity of fascicle dynamics and connective tissues stiffness to exercise duration and ambient temperature during running, both increasing muscle temperature. This study aimed to determine gastrocnemius medialis (GM) fascicle dynamics in vivo during running in temperate and hot conditions, as well as muscle-tendon unit responses.

METHODS

Using ultrafast ultrasound, 15 participants (8 men, 7 women; 26 ± 3 yr) were tested before, during (2 and 40 min), and after a running task (40 min at 10 km·h -1 ) in temperate (TEMP; ~23°C) and hot (HOT: ~38°C) conditions.

RESULTS

Although core, skin temperatures, and heart rate increased from the beginning to the end of the exercise and in a larger extent in HOT than TEMP ( P < 0.001), the physiological stress elicited did not alter running temporal parameters and GM fascicle operating lengths, with similar behavior of the fascicles on their force-length relationship, over time (2 vs 40 min) or across condition (TEMP vs HOT; P ≥ 0.248). Maximal voluntary force production did not reported statistical changes after exercise ( P = 0.060), and the connective tissues stiffness measured (i.e., passive muscle and stiffness of the series-elastic elements) did not show neither time ( P ≥ 0.281), condition ( P ≥ 0.256) nor time-condition interaction ( P ≥ 0.465) effect.

CONCLUSIONS

This study revealed that prolonged running exercise does not alter muscle-tendon unit properties and interplay, which are not influenced by ambient temperature. These findings may rule out potential detrimental effects of heat on muscle properties and encourage further investigations on longer and more intense running exercise.

Test-retest reliability of gastrocnemius medialis fascicle force-length relationship

Fascicle force-length relationship is one major basic mechanical property of skeletal muscle, subsequently influencing movement mechanics. While force-length properties are increasingly described through ultrafast ultrasound imaging, their test-retest reliability remains unknown. Using ultrafast ultrasound, and electrically evoked contractions at various ankle angles, gastrocnemius medialis fascicle force-length relationship was assessed twice, few days apart, in sixteen participants. The test-retest reliability of the resulting fascicle force-length relationship key parameters - i.e., maximal force (Fmax), and optimal fascicle length (L0) - was evaluated considering (i) all the trials obtained at each ankle joint and (ii) the mean of the two trials obtained at each tested angle. Considering all trials, L0 indicated a 'high' test-retest reliability, with intra-class correlation coefficients (ICC) of 0.89 and Fmax a 'moderate' reliability (ICC = 0.71), while when averaging the two trials L0 reliability was 'very-high' (ICC = 0.91), and Fmax reliability 'moderate' (ICC = 0.73). All values of coefficient of variation and standard error of measurement were low, i.e., ≤7.7 % and ≤0.35 cm for L0 and ≤3.4 N for Fmax, respectively. Higher absolute reliability was reported for L0 than Fmax, with better reliability when averaging the two trials at each angle. All these parameters, in accordance with the limit of agreement, demonstrated that L0 and Fmax test-retest reliability is acceptable, particularly when averaging multiple points obtained at a given angle. Interestingly, the shape of the fascicle force-length relationship is more variable. Therefore, L0 and Fmax can be used to compare between days-effects following an intervention, while a comparison of fascicle operating lengths may require more precautions.

Energetics (and Mechanical Determinants) of Sprint and Shuttle Running

Unsteady locomotion (e. g., sprints and shuttle runs) requires additional metabolic (and mechanical) energy compared to running at constant speed. In addition, sprints or shuttle runs with relevant speed changes (e. g., with large accelerations and/or decelerations) are typically short in duration and, thus, anaerobic energy sources must be taken into account when computing energy expenditure. In sprint running there is an additional problem due to the objective difficulty in separating the acceleration phase from a (necessary and subsequent) deceleration phase.In this review the studies that report data of energy expenditure during sprints and shuttles (estimated or actually calculated) will be summarized and compared. Furthermore, the (mechanical) determinants of metabolic energy expenditure will be discussed, with a focus on the analogies with and differences from the energetics/mechanics of constant-speed linear running.

Characterization of the vastus lateralis torque-length, and knee extensors torque-velocity and power-velocity relationships in people with Parkinson's disease

Introduction

Parkinson's disease (PD) is a prevalent neurodegenerative condition observed primarily in the elderly population that gives rise to motor and non-motor symptoms, one of which is muscle weakness. The aim of this study was to characterize the vastus lateralis torque-fascicle length (T-L) and the knee extensors torque-angular velocity (T-V) and power-angular velocity (P-V) relationships in PD patients and to investigate the influence of muscle geometry on muscle mechanics.

Methods

Participants (11 PD: patients, 9 CR: age matched healthy controls; 10 CY: young healthy controls) performed: (i) isometric contractions (e.g., MVC) to obtain the torque-angle and T-L relationships; (ii) isokinetic (e.g., iso-velocity) contractions to obtain the T-V and P-V relationships. During the experiments, the architecture of vastus lateralis (pennation angle, fascicle length, muscle thickness) was also determined by using an ultrasound apparatus.

Results

Significant differences were observed between PD patients and physically matched control groups (CR and CY) in terms of maximum isometric force (calculated as the apex of the T-L curve) and maximum mechanical power (apex of the P-V curve), but not in maximum shortening velocity. Among the mechanical variables investigated, mechanical power was able to identify differences between the less and the more affected side in PD patients, suggesting that this parameter could be useful for clinical evaluation in this population.

Conclusions

The observed results cannot be explained by differences in muscle geometry at rest (similar in the three cohorts), but rather by the muscle capacity to change in shape during contraction, that is impaired in PD patients.

Comparison of Metabolic Power and Energy Cost of Submaximal and Sprint Running Efforts Using Different Methods in Elite Youth Soccer Players: A Novel Energetic Approach

Sprinting is a decisive action in soccer that is considerably taxing from a neuromuscular and energetic perspective. This study compared different calculation methods for the metabolic power (MP) and energy cost (EC) of sprinting using global positioning system (GPS) metrics and electromyography (EMG), with the aim of identifying potential differences in performance markers. Sixteen elite U17 male soccer players (age: 16.4 ± 0.5 years; body mass: 64.6 ± 4.4 kg; and height: 177.4 ± 4.3 cm) participated in the study and completed four different submaximal constant running efforts followed by sprinting actions while using portable GPS-IMU units and surface EMG. GPS-derived MP was determined based on GPS velocity, and the EMG-MP and EC were calculated based on individual profiles plotting the MP of the GPS and all EMG signals acquired. The goodness of fit of the linear regressions was assessed by the coefficient of determination (R2), and a repeated measures ANOVA was used to detect changes. A linear trend was found in EMG activity during submaximal speed runs (R2 = 1), but when the sprint effort was considered, the trend became exponential (R2 = 0.89). The EMG/force ratio displayed two different trends: linear up to a 30 m sprint (R2 = 0.99) and polynomial up to a 50 m sprint (R2 = 0.96). Statistically significant differences between the GPS and EMG were observed for MP splits at 0-5 m, 5-10 m, 25-30 m, 30-35 m, and 35-40 m and for EC splits at 5-10 m, 25-30 m, 30-35 m, and 35-40 m (p ≤ 0.05). Therefore, the determination of the MP and EC based on GPS technology underestimated the neuromuscular and metabolic engagement during the sprinting efforts. Thus, the EMG-derived method seems to be more accurate for calculating the MP and EC in this type of action.

Assessment and modelling of the activation-dependent shift in optimal length of the human soleus muscle in vivo

Previous in vitro and in situ studies have reported a shift in optimal muscle fibre length for force generation (L0) towards longer length at decreasing activation levels (also referred to as length-dependent activation), yet the relevance for in vivo human muscle contractions with a variable activation pattern remains largely unclear. By a combination of dynamometry, ultrasound and electromyography (EMG), we experimentally obtained muscle force-fascicle length curves of the human soleus at 100%, 60% and 30% EMGmax levels from 15 participants aiming to investigate activation-dependent shifts in L0 in vivo. The results showed a significant increase in L0 of 6.5 ± 6.0% from 100% to 60% EMGmax and of 9.1 ± 7.2% from 100% to 30% EMGmax (both P < 0.001), respectively, providing evidence of a moderate in vivo activation dependence of the soleus force-length relationship. Based on the experimental results, an approximation model of an activation-dependent force-length relationship was defined for each individual separately and for the collective data of all participants, both with sufficiently high accuracy (R2 of 0.899 ± 0.056 and R2 = 0.858). This individual approximation approach and the general approximation model outcome are freely accessible and may be used to integrate activation-dependent shifts in L0 in experimental and musculoskeletal modelling studies to improve muscle force predictions. KEY POINTS: The phenomenon of the activation-dependent shift in optimal muscle fibre length for force generation (length-dependent activation) is poorly understood for human muscle in vivo dynamic contractions. We experimentally observed a moderate shift in optimal fascicle length towards longer length at decreasing electromyographic activity levels for the human soleus muscle in vivo. Based on the experimental results, we developed a freely accessible approximation model that allows the consideration of activation-dependent shifts in optimal length in future experimental and musculoskeletal modelling studies to improve muscle force predictions.

Effects of gait retraining using minimalist shoes on the medial gastrocnemius muscle-tendon unit behavior and dynamics during running

The effects of a 12-week gait retraining program on the adaptation of the medial gastrocnemius (MG) and muscle-tendon unit (MTU) were investigated. 26 runners with a rearfoot strike pattern (RFS) were randomly assigned to one of two groups: gait retraining (GR) or control group (CON). MG ultrasound images, marker positions, and ground reaction forces (GRF) were collected twice during 9 km/h of treadmill running before and after the intervention. Ankle kinetics and the MG and MTU behavior and dynamics were quantified. Runners in the GR performed gradual 12-week gait retraining transitioning to a forefoot strike pattern. After 12-week, (1) ten participants in each group completed the training; eight participants in GR transitioned to non-RFS with reduced foot strike angles; (2) MG fascicle contraction length and velocity significantly decreased after the intervention for both groups, whereas MG forces increased after intervention for both groups; (3) significant increases in MTU stretching length for GR and peak MTU recoiling velocity for both groups were observed after the intervention, respectively; (4) no significant difference was found for all parameters of the series elastic element. Gait retraining might potentially influence the MG to operate at lower fascicle contraction lengths and velocities and produce greater peak forces. The gait retraining had no effect on SEE behavior and dynamics but did impact MTU, suggesting that the training was insufficient to induce mechanical loading changes on SEE behavior and dynamics.

Patellar Tendon Adaptations to Downhill Running Training and Their Relationships With Changes in Mechanical Stress and Loading History

ABSTRACT

Bontemps, B, Gruet, M, Louis, J, Owens, DJ, Miríc, S, Vercruyssen, F, and Erskine, RM. Patellar tendon adaptations to downhill running training and their relationships with changes in mechanical stress and loading history. J Strength Cond Res 38(1): 21-29, 2024-It is unclear whether human tendon adapts to moderate-intensity, high-volume long-term eccentric exercise, e.g., downhill running (DR) training. This study aimed to investigate the time course of patellar tendon (PT) adaptation to short-term DR training and to determine whether changes in PT properties were related to changes in mechanical stress or loading history. Twelve untrained, young, healthy adults (5 women and 7 men) took part in 4 weeks' DR training, comprising 10 sessions. Running speed was equivalent to 60-65% V̇O2max, and session duration increased gradually (15-30 minutes) throughout training. Isometric knee extensor maximal voluntary torque (MVT), vastus lateralis (VL) muscle physiological cross-sectional area (PCSA) and volume, and PT CSA, stiffness, and Young's modulus were assessed at weeks 0, 2, and 4 using ultrasound and isokinetic dynamometry. Patellar tendon stiffness (+6.4 ± 7.4%), Young's modulus (+6.9 ± 8.8%), isometric MVT (+7.5 ± 12.3%), VL volume (+6.6 ± 3.2%), and PCSA (+3.8 ± 3.3%) increased after 4 weeks' DR (p < 0.05), with no change in PT CSA. Changes in VL PCSA correlated with changes in PT stiffness (r = 0.70; p = 0.02) and Young's modulus (r = 0.63; p = 0.04) from 0 to 4 weeks, whereas changes in MVT did not correlate with changes in PT stiffness and Young's modulus at any time point (p > 0.05). To conclude, 4 weeks' DR training promoted substantial changes in PT stiffness and Young's modulus that are typically observed after high-intensity, low-volume resistance training. These tendon adaptations seemed to be driven primarily by loading history (represented by VL muscle hypertrophy), whereas increased mechanical stress throughout the training period did not seem to contribute to changes in PT stiffness or Young's modulus.

Regional muscle features and their association with knee extensors force production at a single joint angle

This study aimed (i) to investigate the role of regional characteristics of the knee extensors muscles (vastus lateralis: VL, vastus intermedius: VI and rectus femoris: RF) in determining maximum-voluntary force (MVF); and (ii) to understand which regional parameter of muscle structure would best predict MVF. Muscle architecture (e.g., pennation angle and fascicle length), muscle volume (Vol), anatomical (ACSA) and physiological cross-sectional-area (PCSA) were measured in the proximal (0-33% of the muscle length), middle (33-66% of the muscle length) and distal (66-100% of the muscle length) portions of each muscle in fifteen healthy males using ultrasound and Magnetic Resonance Imaging (MRI). Knee extensors force was calculated in isometric condition at a single knee joint angle of 90 degrees. Regional ACSA, Vol and PCSA were correlated with MVF production. Regional muscle geometry showed no significant correlations with MVF. Among regions, the middle portion of each muscle was largely correlated with MVF compared to all the other regions (distal and proximal). To understand which regional structural parameter best predicted MVF, a stepwise multiple linear regression was performed. This model showed a significant explanatory power (P < 0.001, R2 = 0.76, adjusted R2  = 0.71), including muscle Vol collected in the mid portions of VL and RF. Even if no significant differences were reported between Vol, PCSA and ACSA in determining MVF, our results showed that the RF and VL volume collected in the middle portion of the muscle length are strong determinants of MVF produced by the knee extensors at 90 degrees joint angle.

Regional differences in behaviors of fascicle and tendinous tissue of the biceps femoris long head during hamstring exercises

The biceps femoris long head (BFLH) gains its properties from internal elements (fascicles and tendinous tissues) which behaviors remain poorly understood across BFLH regions and dynamic tasks. The aim of this study was to assess the in vivo behaviors of fascicles and tendinous tissue in the proximal and distal regions of BFLH during different dynamic knee and hip tasks. Twenty males performed the Nordic hamstring exercise (NHE) (n = 9) and Romanian deadlift (RDL) (n = 11). Activation of the BFLH was assessed using surface electromyography signals. Ultrasound images of BFLH and kinematic data were used to estimate the interaction between fascicle and tendinous tissue. The fascicles changed less in length (p < 0.05) and contributed less to BFLH length change (p < 0.05) in NHE with higher activation (p < 0.05) relative to RDL. The higher pennation angle changes of BFLH were found in distal region compared to proximal region in both tasks (p < 0.05), while the activation of distal region was higher than activation of proximal region in NHE (p < 0.05). The BFLH length change was primarily contributed by the tendinous tissue during dynamic resistance tasks, and was contributed less by fascicles which operated more isometrically in knee-dominant NHE with higher activation relative to hip-dominant RDL. Regional differences in pennation angle change and activation during dynamic tasks suggest potential regional differences in the mechanical function of BFLH, warranting further investigation.

Mechanics of The Medial Gastrocnemius-Tendon Unit in Behaving more Efficiently in Habitual Non-Rearfoot Strikers than in Rearfoot Strikers during Running

This study aims to quantify how habitual foot strike patterns would affect ankle kinetics and the behavior and mechanics of the medial gastrocnemius-tendon unit (MTU) during running. A total of 14 runners with non-rearfoot strike patterns (NRFS) and 15 runners with rearfoot strike patterns (RFS) ran on an instrumented treadmill at a speed of 9 km/h. An ultrasound system and a motion capture system were synchronously triggered to collect the ultrasound images of the medial gastrocnemius (MG) and marker positions along with ground reaction forces (GRF) during running. Ankle kinetics (moment and power) and MG/MTU behavior and mechanical properties (MG shortening length, velocity, force, power, MTU shortening/lengthening length, velocity, and power) were calculated. Independent t-tests were performed to compare the two groups of runners. Pearson correlation was conducted to detect the relationship between foot strike angle and the MTU behavior and mechanics. Compared with RFS runners, NRFS runners had 1) lower foot strike angles and greater peak ankle moments; 2) lower shortening/change length and contraction velocity and greater MG peak force; 3) greater MTU lengthening, MTU shortening length and MTU lengthening velocity and power; 4) the foot strike angle was positively related to the change of fascicle length, fascicle contraction length, and MTU shortening length during the stance phase. The foot strike angle was negatively related to the MG force and MTU lengthening power. The MG in NRFS runners appears to contract with greater force in relatively isometric behavior and at a slower shortening velocity. Moreover, the lengthening length, the lengthening velocity of MTU, and the MG force were greater in habitual NRFS runners, leading to a stronger stretch reflex response potentially.

Biarticular mechanisms of the gastrocnemii muscles enhance ankle mechanical power and work during running

The objective of the study was to explore how biarticular mechanisms of the gastrocnemii muscles may provide an important energy source for power and work at the ankle joint with increasing running speed. Achilles tendon force was quantified as a proxy of the triceps surae muscle force and the contribution of the monoarticular soleus and the biarticular gastrocnemii to the mechanical power and work performed at the ankle joint was investigated in three running speeds (transition 2.0 m s-1, slow 2.5 m s-1, fast 3.5 m s-1). Although the contribution of the soleus was higher, biarticular mechanisms of the gastrocnemii accounted for a relevant part of the performed mechanical power and work at the ankle joint. There was an ankle-to-knee joint energy transfer in the first part of the stance phase and a knee-to-ankle joint energy transfer during push-off via the gastrocnemii muscles, which made up 16% of the total positive ankle joint work. The rate of knee-to-ankle joint energy transfer increased with speed, indicating a speed-related participation of biarticular mechanisms in running. This energy transfer via the gastrocnemii seems to occur with negligible energy absorption/production from the quadriceps vasti contractile elements and is rather an energy exchange between elastic structures.

The Relationship Between Lower Limb Passive Muscle and Tendon Compression Stiffness and Oxygen Cost During Running

Studies have reported that a stiff triceps surae muscle and tendon-aponeurosis and also a more compliant quadriceps muscle and tendon-aponeurosis, are related to lower oxygen cost during running. However, to date, no study has investigated in a single experiment how oxygen cost during running is related to the stiffness of the free tendons (Achilles tendon, patellar tendon) and all the superficial muscles of two major muscle groups for running (i.e., quadriceps, triceps surae). Thus, 17 male trained runners/triathletes participated in this study and visited the laboratory on three occasions. On the first day, the participants were familiarized with the tests. On the second day, the passive compression stiffness of the triceps surae muscle (i.e., gastrocnemii), Achilles tendon, quadriceps muscle (i.e., vastii, rectus femoris), and patellar tendon was non-invasively measured using a digital palpation device (MyotonPRO). In addition, an incremental test was applied to test the VO2max of the participants. Thereafter, in the third visit, after at least 48-h of rest, participants performed a 15-min run on the treadmill with a speed reflecting a velocity of 70% VO2max, to assess oxygen costs during running. The Spearman correlation showed a significant negative correlation between passive Achilles tendon compression stiffness and running oxygen consumption, with a large effect size (rρ = -0.52; CI (95%) -0.81 to -0.33; P = 0.03). Moreover, no further significant relationship between oxygen cost during running and the passive compression stiffness of the quadriceps muscle and patellar tendon, as well as the triceps surae muscle, was detected. The significant correlation indicates that a stiffer passive Achilles tendon can lead to a lower oxygen cost during running. Future studies will have to test the causality of this relationship with training methods such as strength training that are able to increase the Achilles tendon stiffness.

Maximal fascicle shortening velocity measurements in human medial gastrocnemius muscle in vivo

This study evaluated the maximal fascicle shortening velocity under near-no-load conditions. In addition, we determined whether the rate of torque development during ballistic contraction was related to maximal fascicle shortening velocity. Under passive and active conditions, the medial gastrocnemius muscle fascicle shortening velocity was measured using ultrasonography at 300, 400, 500, 600, 700, 800, 900, and 1000 ° s-1 . The maximal fascicle shortening velocity was defined as the fascicle shortening velocity under the lowest angular velocity that satisfied the following two conditions; (1) the difference in torque values between passive and active conditions was below 2.4 Nm and (2) the difference in fascicle shortening velocities between passive and active conditions was below 10 mm s-1 . The rate of torque development was analyzed during the periods of 32, 48, 96, 152, and 200 ms after the onset of contraction during ballistic contraction. At the angular velocity (678.6 ± 147.7 ° s-1 ) that satisfied the two previously mentioned conditions, the exerted torque and the maximal fascicle shortening velocity were 1.4 ± 1.3 Nm and 251.0 ± 40.5 mm s-1 . No significant correlations were found between the maximal fascicle shortening velocity and the rate of torque development at each time point. In conclusion, the maximal fascicle shortening velocity was quantified when the angular velocity satisfied the two conditions. Furthermore, the rate of torque development, often used as an indicator of muscle velocity, did not represent the maximal fascicle shortening velocity.

The interplay between gastrocnemius medialis force-length and force-velocity potentials, cumulative EMG activity and energy cost at speeds above and below the walk to run transition speed

NEW FINDINGS

What is the central question of the study? Are the changes in force potentials (at the muscle level) related with metabolic changes at speeds above and below the walk-to-run transition? What is the main finding and its importance? The force-length and force-velocity potentials of gastrocnemius medialis during human walking decrease as a function of speed; this decrease is associated with an increase in cumulative EMG activity and in the energy cost of locomotion. Switching from fast walking to running is associated to an increase in the force potentials, supporting the idea that the 'metabolic trigger' that determines the transition from walking to running is ultimately driven by a reduction of the muscle's contractile capacity.

ABSTRACT

The aim of this study was to investigate the interplay between the force-length (F-L) and force-velocity (F-V) potentials of gastrocnemius medialis (GM) muscle fascicles, the cumulative muscle activity per distance travelled (CMAPD) of the lower limb muscles (GM, vastus lateralis, biceps femori, tibialis anterior) and net energy cost (Cnet ) during walking and running at speeds above and below the walk-to-run transition speed (walking: 2-8 km h-1 ; running: 6-10 km h-1 ). A strong association was observed between Cnet and CMAPD: both changed significantly with walking speed but were unaffected by speed in running. The F-L and F-V potentials decreased with speed in both gaits and, at 6-8 km h-1 , were significantly larger in running. At low to moderate walking speeds (2-6 km h-1 ), the changes in GM force potentials were not associated with substantial changes in CMAPD (and Cnet ), whereas at walking speeds of 7-8 km h-1 , even small changes in force potentials were associated with steep increases in CMAPD (and Cnet ). These data suggest that: (i) the walk to run transition could be explained by an abrupt increase in Cnet driven by an upregulation of the EMG activity (e.g., in CMAPD) at sustained walking speeds (>7 km h-1 ) and (ii) the reduction in the muscle's ability to produce force (e.g., in the F-L and F-V potentials) contributes to the increase in CMAPD (and Cnet ). Switching to running allows regaining of high force potentials, thus limiting the increase in CMAPD (and Cnet ) that would otherwise occur to sustain the increase in locomotion speed.

Running Velocity and Longitudinal Bending Stiffness Influence the Asymmetry of Kinematic Variables of the Lower Limb Joints

Running-related limb asymmetries suggest specific sports injuries and recovery circumstances. It is debatable if running speed affected asymmetry, and more research is required to determine how longitudinal bending stiffness (LBS) affected asymmetry. The purpose of this study was to investigate the influence of running velocity and LBS on kinematic characteristics of the hip, knee, ankle, metatarsophalangeal joint (MTP) and the corresponding asymmetry. Kinematic (200 Hz) running stance phase data were collected bilaterally for 16 healthy male recreational runners (age: 23.13 ± 1.17, height: 175.2 ± 1.6 cm, body mass: 75.7 ± 3.6 kg, BMI: 24.7 ± 1.3 kg/m2) running on a force plate at three different velocities (10, 12 and 14 km/h) and three increasing-LBS shoes in a randomized order. The symmetry angle (SA) was calculated to quantify gait asymmetry magnitude at each running velocity and LBS. Changes in running velocity and LBS led to differences in kinematic variables between the hip, knee, ankle and MTP (p < 0.05). Significant changes in SA caused by running velocity were found in the knee flexion angle (p = 0.001) and flexion angle peak velocity (p < 0.001), ankle plantarflexion angle (p = 0.001) and plantarflexion angle peak velocity (p = 0.043) and MTP dorsiflexion angle (p = 0.001) and dorsiflexion angle peak velocity (p = 0.019). A significant change in the SA caused by LBS was found in the MTP dorsiflexion peak angle velocity (p = 0.014). There were interaction effects between running velocity and LBS on the MTP plantarflexion angle (p = 0.033) and plantarflexion angle peak velocity (p = 0.038). These findings indicate the existence of bilateral lower limb asymmetry. Meanwhile, it was proved that running velocity and LBS can influence the asymmetry of lower limb joints. Additionally, there was an interaction between running velocity and LBS on the asymmetry of the lower limb. These findings can provide some information for sports injuries, such as metatarsal stress fractures and anterior cruciate ligament injuries. They can also provide some useful information for running velocities and running shoes.

Automated Method for Tracking Human Muscle Architecture on Ultrasound Scans during Dynamic Tasks

Existing approaches for automated tracking of fascicle length (FL) and pennation angle (PA) rely on the presence of a single, user-defined fascicle (feature tracking) or on the presence of a specific intensity pattern (feature detection) across all the recorded ultrasound images. These prerequisites are seldom met during large dynamic muscle movements or for deeper muscles that are difficult to image. Deep-learning approaches are not affected by these issues, but their applicability is restricted by their need for large, manually analyzed training data sets. To address these limitations, the present study proposes a novel approach that tracks changes in FL and PA based on the distortion pattern within the fascicle band. The results indicated a satisfactory level of agreement between manual and automated measurements made with the proposed method. When compared against feature tracking and feature detection methods, the proposed method achieved the lowest average root mean squared error for FL and the second lowest for PA. The strength of the proposed approach is that the quantification process does not require a training data set and it can take place even when it is not possible to track a single fascicle or observe a specific intensity pattern on the ultrasound recording.

Triceps surae muscle force potential and force demand shift with altering stride frequency in running

While it is well recognized that the preferred stride frequency (PSF) in running closely corresponds to the metabolically optimal frequency, the underlying mechanisms are still unclear. Changes in joint kinematics when altering stride frequency will affect the muscle-tendon unit lengths and potentially the efficiency of muscles crossing these joints. Here, we investigated how fascicle kinematics and forces of the triceps surae muscle, a highly energy consuming muscle, are affected when running at different stride frequencies. Twelve runners ran on a force measuring treadmill, adopting five different frequencies (PSF; PSF±8%; PSF±15%), while we measured joint kinematics, whole-body energy expenditure, triceps surae muscle activity, and soleus (SOL; N = 10) and gastrocnemius medialis (GM; N = 12) fascicle kinematics. In addition, we used dynamic optimization to estimate SOL and GM muscle forces. We found that SOL and GM mean muscle fascicle length during stance followed an inverted U-relationship with the longest fascicle lengths occurring at PSF. Fascicle lengths were shortest at frequencies lower than PSF. In addition, average SOL force was greater at PSF-15% compared to PSF. Overall, our results suggest that reduced SOL and GM muscle fascicle lengths, associated with reduced muscle force potential, together with greater SOL force demand, contribute to the increased whole-body energy expenditure when running at lower than PSF. At higher stride frequencies, triceps surae muscle kinematics and force production were less affected suggesting that increased energy expenditure is rather related to higher cost of leg swing and greater cost of force production.

Not Lower-Limb Joint Strength and Stiffness but Vertical Stiffness and Isometric Force-Time Characteristics Correlate With Running Economy in Recreational Male Runners

Neuromuscular characteristics, such as lower-limb joint strength, the ability to reuse elastic energy, and to generate force are essential factors influencing running performance. However, their relationship with running economy (RE) remains unclear. The aim of this study was to evaluate the correlations between isokinetic lower-limb joint peak torque (PT), lower-limb stiffness, isometric force-time characteristics and RE among recreational-trained male runners. Thirty male collegiate runners (aged 20–22 years, VO2max: 54.02 ± 4.67 ml·kg−1·min−1) participated in test sessions on four separate days. In the first session, the body composition and RE at 10 km·h−1 were determined. In the second session, leg and vertical stiffness (Kleg and Kvert), knee and ankle stiffness (Kknee and Kankle) were evaluated. In the third session, isokinetic knee and ankle joint PT at velocity of 60°s−1 were tested. The force-time characteristics of isometric mid-thigh pull (IMTP) were evaluated in the final session. The Pearson’s product-moment correlations analysis shows that there were no significant relationships between knee and ankle joint concentric and eccentric PT, Kknee and Kankle, Kleg, and RE at 10 km·h−1. However, Kvert (r = −0.449, p &lt; 0.05) and time-specific rate of force development (RFD) for IMTP from 0 to 50 to 0–300 ms (r = −0.434 to −0.534, p &lt; 0.05) were significantly associated with RE. Therefore, superior RE in recreational runners may not be related to knee and ankle joint strength and stiffness. It seems to be associated with vertical stiffness and the capacity to rapidly produce force within 50–300 ms throughout the lower limb.

Achilles Tendon Mechanical Behavior and Ankle Joint Function at the Walk-to-Run Transition

Walking at speeds higher than transition speed is associated with a decrease in the plantar-flexor muscle fibres’ ability to produce force and, potentially, to an impaired behaviour of the muscle−tendon unit (MTU) elastic components. This study aimed to investigate the ankle joint functional indexes and the Achilles tendon mechanical behaviour (changes in AT force and power) to better elucidate the mechanical determinants of the walk-to-run transition. Kinematics, kinetic and ultrasound data of the gastrocnemius medialis (GM) were investigated during overground walking and running at speeds ranging from 5−9 km·h−1. AT and GM MTU force and power were calculated during the propulsive phase; the ankle joint function indexes (damper, strut, spring and motor) were obtained using a combination of kinetic and kinematic data. AT force was larger in running at speeds > 6.5 km/h. The contribution of AT to the total power provided by the GM MTU was significantly larger in running at speeds > 7.5 km/h. The spring and strut indexes of the ankle were significantly larger in running at speeds > 7.5 km/h. These data suggest that the walk-to-run transition could (at least partially) be explained by the need to preserve AT mechanical behaviour and the ankle spring function.

Achilles tendon mechanical properties during walking and running are underestimated when its curvature is not accounted for

Achilles tendon (AT) mechanical properties can be estimated using an inverse dynamic approach, taking into account the tendon internal moment arm (IMA) and its kinematic behavior. Although AT presents a curvilinear line of action, a straight-line function to estimate IMA and AT length is often utilized in the literature. In this study, we combined kinetic, kinematic and ultrasound data to understand the impact of two different approaches (straight-line vs. curvilinear) in determining AT mechanical properties in vivo (during walking and running at the self-selected speed). AT force and power were calculated based on data of AT IMA and AT length derived by both respective methods. All investigated parameters were significantly affected by the method utilized (paired t-test; p < 0.05): when using the curvilinear method IMA was about 5% lower and AT length about 1.2% higher, whereas peak and mean values of AT force and power were 5% higher when compared to the straight-line method (both in walking and running). Statistic-parametric mapping (SMP) analysis revealed significant differences in IMA during the early and the late stance phase of walking and during the late stance phase of running (p < 0.01); SPM revealed significant differences also in AT length during the entire stance phase in both locomotion modes (p < 0.01). These results confirm and extend previous findings to human locomotion: neglecting the AT curvature might be a source of error, resulting in underestimates not only of internal moment arm and tendon length, but also of tendon force and power.

Relationship Between Isokinetic Lower-Limb Joint Strength, Isometric Time Force Characteristics, and Leg-Spring Stiffness in Recreational Runners

Neuromuscular characteristics, such as lower-limb joint strength and the ability to rapidly generate force, may play an important role in leg-spring stiffness regulation. This study aimed to investigate the relationship between isokinetic knee and ankle joint peak torque (PT), the force-time characteristics of isometric mid-thigh pull (IMTP), and leg stiffness (K_leg)/vertical stiffness (K_vert) in recreationally trained runners. Thirty-one male runners were recruited and underwent three separate tests. In the first session, the body composition, K_leg, and K_vert at running speeds of 12 and 14 km⋅h^–1 were measured. In the second session, isokinetic knee and ankle joint PT at 60°⋅s^–1 were tested. The force-time characteristics of the IMTP were evaluated in the final session. Pearson’s product-moment correlations, with the Benjamini–Hochberg correction procedure, showed that the knee flexor concentric and eccentric and extensor concentric PT (r = 0.473–0.654, p < 0.05) were moderate to largely correlated with K_leg and K_vert at 12 and 14 km⋅h^–1. The knee extensor eccentric PT (r = 0.440, p = 0.050) was moderately correlated with the 14 km⋅h^–1K_vert. The ankle plantar flexor concentric and dorsiflexor eccentric PT (r = 0.506–0.571, p < 0.05) were largely correlated with K_leg at 12 km⋅h^–1. The ankle plantar flexor concentric and eccentric and dorsiflexor eccentric PT (r = 0.436–0.561, p < 0.05) were moderate to largely correlated with K_vert at 12 and 14 km⋅h^–1. For IMTP testing, high correlation was only found between the IMPT peak force (PF) and K_vert at 14 km⋅h^–1 (r = 0.510, p = 0.014). Thus, superior leg-spring stiffness in recreational runners may be related to increased knee and ankle joint strength, eccentric muscular capacity, and maximal force production.

Differences in Knee Extensors’ Muscle–Tendon Unit Passive Stiffness, Architecture, and Force Production in Competitive Cyclists Versus Runners

To describe the possible effects of chronic specific exercise training, the present study compared the anthropometric variables, muscle–tendon unit (MTU) architecture, passive stiffness, and force production capacity between a group of competitive cyclists and runners. Twenty-seven competitive male cyclists (n = 16) and runners (n = 11) participated. B-mode ultrasound evaluation of the vastus lateralis muscle and patellar tendon as well as passive stiffness of the knee extensors MTU were assessed. The athletes then performed a test of knee extensor maximal voluntary isometric contractions. Cyclists displayed greater thigh girths, vastus lateralis pennation angle and muscle thickness, patellar tendon cross-sectional area, and MTU passive stiffness than runners (P < .05). Knee extensor force production capacity also differed significantly, with cyclists showing greater values compared with runners (P < .05). Overall, the direct comparison of these 2 populations revealed specific differences in the MTU, conceivably related to the chronic requirements imposed through the training for the different disciplines.

Development of Muscle-Tendon Adaptation in Preadolescent Gymnasts and Untrained Peers: A 12-Month Longitudinal Study

PURPOSE

The current study investigated the effects of long-term athletic training on the development of the triceps surae muscle-tendon unit in preadolescence.

METHODS

Eleven preadolescent untrained children and a group of 21 artistic gymnastics athletes of similar age (9 ± 1.7 yr) and maturity (Tanner stages I and II) participated in the study. The measurements were conducted every 3 months for 1 yr, and training volume and duration of the athletes were documented. Plantar flexor muscle strength, Achilles tendon stiffness, maximum tendon strain, and gastrocnemius medialis morphometrics were measured by integrating kinematics, ultrasonography, and dynamometry. A linear mixed-effects model was used to analyze the investigated parameters.

RESULTS

We found greater muscle strength (P < 0.001) in athletes compared with nonathletes but no differences in Achilles tendon stiffness (P = 0.252), indicating a training-induced imbalanced adaptation of muscle strength and tendon stiffness in preadolescent athletes. Although pennation angle (P = 0.490), thickness (P = 0.917), and fascicle length (P = 0.667) did not differ between groups, we found higher fluctuations in pennation angle and muscle strength over 1 yr in athletes. The imbalanced adaptation of muscle strength and tendon stiffness together with greater fluctuations of muscle strength resulted in greater tendon strain fluctuations over 1 yr (P = 0.017) and a higher frequency of athletes with high-level tendon strain (≥9%) compared with nonathletes.

CONCLUSIONS

The findings indicate an increased mechanical demand for the tendon in preadolescent athletes that could have implications for the risk of tendon overuse injury. Therefore, we recommend the implementation of individual training approaches to preserve a balanced adaptation within the triceps surae muscle-tendon unit in preadolescent athletes.

Muscle-specific economy of force generation and efficiency of work production during human running

Human running features a spring-like interaction of body and ground, enabled by elastic tendons that store mechanical energy and facilitate muscle operating conditions to minimize the metabolic cost. By experimentally assessing the operating conditions of two important muscles for running, the soleus and vastus lateralis, we investigated physiological mechanisms of muscle work production and muscle force generation. We found that the soleus continuously shortened throughout the stance phase, operating as work generator under conditions that are considered optimal for work production: high force-length potential and high enthalpy efficiency. The vastus lateralis promoted tendon energy storage and contracted nearly isometrically close to optimal length, resulting in a high force-length-velocity potential beneficial for economical force generation. The favorable operating conditions of both muscles were a result of an effective length and velocity-decoupling of fascicles and muscle-tendon unit, mostly due to tendon compliance and, in the soleus, marginally by fascicle rotation.

Muscle Belly Gearing Positively Affects the Force-Velocity and Power-Velocity Relationships During Explosive Dynamic Contractions

Changes in muscle shape could play an important role during contraction allowing to circumvent some limits imposed by the fascicle force–velocity (F–V) and power–velocity (P–V) relationships. Indeed, during low-force high-velocity contractions, muscle belly shortening velocity could exceed muscle fascicles shortening velocity, allowing the muscles to operate at higher F–V and P–V potentials (i.e., at a higher fraction of maximal force/power in accordance to the F–V and P–V relationships). By using an ultrafast ultrasound, we investigated the role of muscle shape changes (vastus lateralis) in determining belly gearing (muscle belly velocity/fascicle velocity) and the explosive torque during explosive dynamic contractions (EDC) at angular accelerations ranging from 1000 to 4000°.s^–2. By means of ultrasound and dynamometric data, the F–V and P–V relationships both for fascicles and for the muscle belly were assessed. During EDC, fascicle velocity, belly velocity, belly gearing, and knee extensors torque data were analysed from 0 to 150 ms after torque onset; the fascicles and belly F–V and P–V potentials were thus calculated for each EDC. Absolute torque decreased as a function of angular acceleration (from 80 to 71 Nm, for EDC at 1000 and 4000°.s^–1, respectively), whereas fascicle velocity and belly velocity increased with angular acceleration (P < 0.001). Belly gearing increased from 1.11 to 1.23 (or EDC at 1000 and 4000°.s^–1, respectively) and was positively corelated with the changes in muscle thickness and pennation angle (the changes in latter two equally contributing to belly gearing changes). For the same amount of muscle’s mechanical output (force or power), the fascicles operated at higher F–V and P–V potential than the muscle belly (e.g., P–V potential from 0.70 to 0.56 for fascicles and from 0.65 to 0.41 for the muscle belly, respectively). The present results experimentally demonstrate that belly gearing could play an important role during explosive contractions, accommodating the largest part of changes in contraction velocity and allowing the fascicle to operate at higher F–V and P–V potentials.

The influence of in vivo mechanical behaviour of the Achilles tendon on the mechanics, energetics and apparent efficiency of bouncing gaits

In this study, we used kinematic, kinetic, metabolic and ultrasound analysis to investigate the role of elastic energy utilization on the mechanical and physiological demands of a movement task (hopping) that primarily involves the plantar-flexor muscles to determine the contribution of tendon work to total mechanical work and its relationship with apparent efficiency (AE) in bouncing gaits. Metabolic power (PMET) and (positive) mechanical power at the whole-body level (PMEC) were measured during hopping at different frequencies (2, 2.5, 3 and 3.5 Hz). The (positive) mechanical power produced during the Achilles tendon recoil phase (PTEN) was obtained by integrating ultrasound data with an inverse dynamic approach. As a function of hopping frequency, PMEC decreased steadily and PMET exhibited a U-shape behaviour, with a minimum at about 3 Hz. AE (PMEC/PMET) showed an opposite trend and was maximal (about 0.50) at the same frequency when PTEN was also highest. Positive correlations were observed: (i) between PTEN and AE (AE=0.22+0.15PTEN, R2=0.67, P<0.001) and the intercept of this relationship indicates the value of AE that should be expected when tendon work is nil; (ii) between AE and tendon gearing (Gt=Δmuscle-tendon unit length/Δmuscle belly length; R2=0.50, P<0.001), where a high Gt indicates that the muscle is contracting more isometrically, thus allowing the movement to be more economical (and efficient); (iii) between Gt and PTEN (R2=0.73, P<0.001), which indicates that Gt could play an important role in the tendon's capability to store and release mechanical power.

Low-cost electromyography: validity against a commercial system depends on exercise type and intensity

The aim of this study was to assess the validity of a custom-made low cost (LC) and a commercial surface EMG apparatus in controlled experimental conditions and different exercise types: maximal voluntary contractions (MVC) at 105, 90, 75, 60, 45 and 30° knee angle and explosive fix-end contractions of the knee extensors (75°) at an isometric dynamometer. sEMG of vastus lateralis was recorded from the same electrodes simultaneously, then analyzed in the same way; sEMG were finally expressed in percentage of those collected at 75°MVC. LC underestimated the sEMG signal at the more extended knee angles (30-60°), significant difference was observed only at 30°. In the explosive contractions no differences between devices were observed in average and peak sEMG, as well as in the time to peak and the activation time. Bland-Altman tests and correlation parameters indicate the LC device is not sensible enough to detect the time to peak and the peak values of the sEMG signal properly. Results suggest low-cost systems might be a valid alternative to commercial ones, but attention must be paid when analyzing rapid events.

Shorter heels are linked with greater elastic energy storage in the Achilles tendon

Previous research suggests that the moment arm of the m. triceps surae tendon (i.e., Achilles tendon), is positively correlated with the energetic cost of running. This relationship is derived from a model which predicts that shorter ankle moment arms place larger loads on the Achilles tendon, which should result in a greater amount of elastic energy storage and return. However, previous research has not empirically tested this assumed relationship. We test this hypothesis using an inverse dynamics approach in human subjects (n = 24) at speeds ranging from walking to sprinting. The spring function of the Achilles tendon was evaluated using specific net work, a metric of mechanical energy production versus absorption at a limb joint. We also combined kinematic and morphological data to directly estimate tendon stress and elastic energy storage. We find that moment arm length significantly determines the spring-like behavior of the Achilles tendon, as well as estimates of mass-specific tendon stress and elastic energy storage at running and sprinting speeds. Our results provide support for the relationship between short Achilles tendon moment arms and increased elastic energy storage, providing an empirical mechanical rationale for previous studies demonstrating a relationship between calcaneal length and running economy. We also demonstrate that speed and kinematics moderate tendon performance, suggesting a complex relationship between lower limb geometry and foot strike pattern.

Quantifying mechanical loading and elastic strain energy of the human Achilles tendon during walking and running

The purpose of the current study was to assess in vivo Achilles tendon (AT) mechanical loading and strain energy during locomotion. We measured AT length considering its curve-path shape. Eleven participants walked at 1.4 m/s and ran at 2.5 m/s and 3.5 m/s on a treadmill. The AT length was defined as the distance between its origin at the gastrocnemius medialis myotendinous junction (MTJ) and the calcaneal insertion. The MTJ was tracked using ultrasonography and projected to the reconstructed skin surface to account for its misalignment. Skin-to-bone displacements were assessed during a passive rotation (5°/s) of the ankle joint. Force and strain energy of the AT during locomotion were calculated by fitting a quadratic function to the experimentally measured tendon force-length curve obtained from maximum voluntary isometric contractions. The maximum AT strain and force were affected by speed (p < 0.05, ranging from 4.0 to 4.9% strain and 1.989 to 2.556 kN), yet insufficient in magnitude to be considered as an effective stimulus for tendon adaptation. Besides the important tendon energy recoil during the propulsion phase (7.8 to 11.3 J), we found a recoil of elastic strain energy at the beginning of the stance phase of running (70-77 ms after touch down) between 1.7 ± 0.6 and 1.9 ± 1.1 J, which might be functionally relevant for running efficiency.

The Entrainment Frequency of Cardiolocomotor Synchronization in Long-Distance Race Emerges Spontaneously at the Step Frequency

In forced conditions, where the heart rate and step frequency have been matched, cardiolocomotor synchronization (CLS) has been recognized. However, knowledge about the occurrence of CLS and its triggers in sports gesture in real contexts is little known. To address this gap, the current study tested the hypothesis that CLS in running spontaneous conditions would emerge at entrainment bands of muscle activation frequencies associated with a freely chosen step frequency. Sixteen male long-distance runners undertook treadmill assessments running ten three-minute bouts at different speeds (7, 7.5, 8, 9, 10, 11, 12, 13, 14, and 15 km⋅h^–1). Electrocardiography and surface electromyography were recorded simultaneously. The center frequency was the mean of the frequency spectrum obtained by wavelet decomposition, while CLS magnitude was determined by the wavelet coherence coefficient (WCC) between the electrocardiography and center frequency signals. The strength of CLS affected the entrainment frequencies between cardiac and muscle systems, and for WCC values greater than 0.8, the point from which we consider the emerging CLS, the entrainment frequency was between 2.7 and 2.8 Hz. The CLS emerged at faster speeds (13–15 km⋅h^–1) most prevalently but did not affect the muscle activation bands. Spontaneous CLS occurred at faster speeds predominantly, and the entrainment frequencies matched the locomotor task, with the entrainment bands of frequencies emerging around the step frequencies (2.7–2.8 Hz). These findings are compatible with the concept that interventions that determine optima conditions of CLS may potentiate the benefits of the cardiac and muscle systems synchronized in distance runners.

Lower limb muscle injury location shift from posterior lower leg to hamstring muscles with increasing discipline-related running velocity in international athletics championships

OBJECTIVE

To analyse the rates of lower limb muscle injuries in athletics disciplines requiring different running velocities during international athletics championships.

DESIGN

Prospective total population study.

METHODS

During 13 international athletics championships (2009-2019) national medical teams and local organizing committee physicians daily reported all newly incurred injuries using the same study design, injury definition and data collection procedures. In-competition lower limb muscle injuries of athletes participating in disciplines involving running (i.e. sprints, hurdles, jumps, combined events, middle distances, long distances, and marathon) were analysed.

RESULTS

Among the 12,233 registered athletes, 344 in-competition lower limb muscle injuries were reported (36% of all in-competition injuries). The proportion, incidence rates and injury burden of lower limb muscles injuries differed between disciplines for female and male athletes. The most frequently injured muscle group was hamstring in sprints, hurdles, jumps, combined events and male middle distances runners (43-75%), and posterior lower leg in female middle distances, male long distances, and female marathon runners (44-60%). Hamstring muscles injuries led to the highest burden in all disciplines, except for female middle distance and marathon and male long distance runners. Hamstring muscles injury burden was generally higher in disciplines requiring higher running velocities, and posterior lower leg muscle injuries higher in disciplines requiring lower running velocities.

CONCLUSIONS

The present study shows discipline-specific injury location in competition context. Our findings suggest that the running velocity could be one of the factors that play a role in the occurrence/location of muscle injuries.

Mechanical advantage and joint function of the lower limb during hopping at different frequencies

Mechanical output at a joint level could be influenced by its leverage characteristics and by its functional behaviour and both could change to accommodate the demands of a given locomotor task. In this study, the mechanical power generated at the knee and ankle joints and their functional indexes (i.e. damper, strut, spring and motor like-function) were calculated by using 3D kinematic and kinetic data during hopping at 2, 2.5, 3 and 3.5 Hz. The effective mechanical advantage (i.e. the ratio between internal and external moment arm) of the knee (EMA_K) and ankle (EMA_A) and joint stiffness were calculated as well. Joint stiffness increased with frequency whereas positive and negative joint power decreased with it, the ankle power values being always larger (20-50%) than those at the knee. EMA_A reached its highest value (0.4) during the propulsive phase at 3 Hz whereas no significant changes in EMA_K were observed as a function of frequency in both the absorption and propulsive phases. Knee joint-functional index shifted from a spring to a strut-like function with increasing frequency (from 56 to 8% and from 4 to 51%, respectively) while the ankle operated mainly as a spring (from 90 to 53%), its damper and motor-like indexes being negligible at all frequencies (<5%). Therefore, in hopping, the knee works to dissipate mechanical energy (the combination of its damper and strut indexes increase from 23 to 72% at these frequencies) and the primary source of mechanical power is attributable to the elastic function of the ankle.

Muscle and tendon stiffness and belly gearing positively correlate with rate of torque development during explosive fixed end contractions

We combined ultrafast-ultrasound with dynamometric measurements to assess the associations between muscle structural properties and the rate of torque development (RTD) during isometric explosive fixed-end plantar flexor contractions. The torque-time signal was recorded for the plantaflexor muscles in fifteen men and the peak value of RTD was obtained. Tendon stiffness (kT) and muscle stiffness (kM) of the Gastrocnemius Medialis (GM) were assessed during maximal isometric voluntary contractions (MVC) and quick release using ultrafast ultrasound (1000 Hz). During the explosive contraction, the GM geometrical changes were recorded and the belly gearing (belly velocity/fascicle velocity) was calculated. Pearson's correlation coefficient was used to assess the correlation between variables, whereas equality of correlation coefficients between RTD and kT and kM was tested by means of the Hotelling's statistics. During explosive contraction, kT was higher than kM (~55 and ~30 N⋅mm^-1, respectively). RTD positively correlated with kM (r = 0.75, p < 0.001), kT (r = 0.58, p = 0.044) and belly gearing (r = 0.78, p < 0.001). However, Hotelling's test showed no significant differences between the correlation coefficients between RTD and muscle and tendon stiffness. Further, belly gearing was significantly positively correlated with kM only (r = 0.79, p < 0.001). Our data suggest that muscle and tendon stiffness are similarly associated with RTD. Given the association with belly gearing, muscle stiffness seems to play an important role in determining the muscle length changes, thereby affecting the muscle force transmission capacity during the transient phases.

The influence of Achilles tendon mechanical behaviour on "apparent" efficiency during running at different speeds

Purpose

We investigated the role of elastic strain energy on the “apparent” efficiency of locomotion (AE), a parameter that is known to increase as a function of running speed (up to 0.5–0.7) well above the values of “pure” muscle efficiency (about 0.25–0.30).

Methods

In vivo ultrasound measurements of the gastrocnemius medialis (GM) muscle–tendon unit (MTU) were combined with kinematic, kinetic and metabolic measurements to investigate the possible influence of the Achilles tendon mechanical behaviour on the mechanics (total mechanical work, W_TOT) and energetics (net energy cost, C_net) of running at different speeds (10, 13 and 16 km h⁻¹); AE was calculated as W_TOT/C_net.

Results

GM fascicles shortened during the entire stance phase, the more so the higher the speed, but the majority of the MTU displacement was accommodated by the Achilles tendon. Tendon strain and recoil increased as a function of running speed (P < 0.01 and P < 0.001, respectively). The contribution of elastic energy to the positive work generated by the MTU also increased with speed (from 0.09 to 0.16 J kg⁻¹ m⁻¹). Significant negative correlations (P < 0.01) were observed between tendon work and metabolic energy at each running speed (the higher the tendon work the lower the metabolic demand) and significant positive correlations were observed between tendon work and AE (P < 0.001) at each running speed (the higher the tendon work the higher the efficiency).

Conclusion

These results support the notion that the dynamic function of tendons is integral in reducing energy expenditure and increasing the “apparent” efficiency of running.

Leverage mechanical alterations during walking at self-selected speed in patients with Parkinson's disease

Individuals with Parkinson's disease (PD) show poor walking performance compared to healthy adults. Leverage changes may provide insight into this walking abnormality, since they have important effects on both biomechanical and physiological variables. Hence, we investigated the differences in internal and external moment arms at the knee and ankle joints, as well as the effective mechanical advantage during walking at self-selected speed. Furthermore, the effects on walking of a simultaneous cognitive task were analysed. Kinetic (resultant ground reaction force and joint moments), kinematic (movement speed) and mechanical leverage (internal and external moment arms) parameters of 10 mild-to-moderate PD patients and 10 age-matched controls were measured in single and dual task condition. Finally, effective mechanical advantage was calculated as the ratio between internal and external moment arm for each joint. PD patients had a slower walking and showed larger and lower values of knee and ankle joint moments, respectively. No difference in force among groups was recorded. External moment arms were larger (in both joints) for PD, whereas slight changes were observed for internal moment arms. Consequently, effective mechanical advantage values seemed to be lower for PD. Surprisingly, leverage difference among groups was reduced during the dual task condition, resulting in a "more effective" walking strategy for PD. These findings suggest that during single task PD patients have several leverage disadvantages, which could affect the joint assessment. On the contrary, during dual task they reduced these mechanical negative effects by positively obtaining normal values of effective mechanical advantage.