1
|
Terzini M, Aldieri A, Nurisso S, De Nisco G, Bignardi C. Finite Element Modeling Application in Forensic Practice: A Periprosthetic Femoral Fracture Case Study. Front Bioeng Biotechnol 2020; 8:619. [PMID: 32656199 PMCID: PMC7324477 DOI: 10.3389/fbioe.2020.00619] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/03/2020] [Accepted: 05/20/2020] [Indexed: 11/13/2022] Open
Abstract
The incidence of periprosthetic fractures has rapidly increased in the last two decades and has been the cause of a large number of revision surgeries and permanent physical disability for many patients, as well as a significant socioeconomic burden for many nations. This research deals with a periprosthetic femur fracture real event, occurred following a total hip arthroplasty and treated with one of the most widespread internal fixation methods: the implant of a periprosthetic femur plate system. A Finite Element analysis was performed to investigate the implanted femur plate break after a short follow-up and to understand the plate break causes. Such events are currently object of forensic debate as more and more often hospitals, surgeons, and medical device manufacturers are denounced by patients to whom similar events occur. In this work, different load situations acting on the femur during daily and incidental activities were simulated, in order to validate the correct behavior of the plate, according to the intended use recommended by the manufacturer. The analysis demonstrates that the plate failure can occur in situations of unconventional loading such as that caused by stumbling and in presence of incomplete bone healing.
Collapse
Affiliation(s)
- Mara Terzini
- Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy.,PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy
| | - Alessandra Aldieri
- Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy.,PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy
| | - Stefania Nurisso
- Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy.,PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy
| | - Giuseppe De Nisco
- Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy.,PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy
| | - Cristina Bignardi
- Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy.,PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy
| |
Collapse
|
2
|
Putame G, Pascoletti G, Terzini M, Zanetti EM, Audenino AL. Mechanical Behavior of Elastic Self-Locking Nails for Intramedullary Fracture Fixation: A Numerical Analysis of Innovative Nail Designs. Front Bioeng Biotechnol 2020; 8:557. [PMID: 32582675 PMCID: PMC7289914 DOI: 10.3389/fbioe.2020.00557] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2019] [Accepted: 05/07/2020] [Indexed: 11/13/2022] Open
Abstract
Intramedullary nails constitute a viable alternative to extramedullary fixation devices; their use is growing in recent years, especially with reference to self-locking nails. Different designs are available, and it is not trivial to foresee the respective in vivo performances and to provide clinical indications in relation to the type of bone and fracture. In this work a numerical methodology was set up and validated in order to compare the mechanical behavior of two new nailing device concepts with one already used in clinic. In detail, three different nails were studied: (1) the Marchetti-Vicenzi's nail (MV1), (2) a revised concept of this device (MV2), and (3) a new Terzini-Putame's nail (TP) concept. Firstly, the mechanical behavior of the MV1 device was assessed through experimental loading tests employing a 3D-printed component aimed at reproducing the bone geometry inside which the device is implanted. In the next step, the respective numerical model was created, based on a multibody approach including flexible parts, and this model was validated against the previously obtained experimental results. Finally, numerical models of the MV2 and TP concepts were implemented and compared with the MV1 nail, focusing the attention on the response of all devices to compression, tension, bending, and torsion. A stability index (SI) was defined to quantify the mechanical stability provided to the nail-bone assembly by the elastic self-locking mechanism for the various loading conditions. In addition, results in terms of nail-bone assembly stiffness, computed from force/moment vs. displacement/rotation curves, were presented and discussed. Findings revealed that numerical models were able to provide good estimates of load vs. displacement curves. The TP nail concept proved to be able to generate a significantly higher SI (27 N for MV1 vs. 380 N for TP) and a greater stiffening action (up to a stiffness difference for bending load that ranges from 370 Nmm/° for MV1 to 1,532 Nmm/° for TP) than the other two devices which showed similar performances. On the whole, a demonstration was given of information which can be obtained from numerical simulations of expandable fixation devices.
Collapse
Affiliation(s)
- Giovanni Putame
- Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy.,PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy
| | | | - Mara Terzini
- Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy.,PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy
| | | | - Alberto L Audenino
- Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy.,PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy
| |
Collapse
|
3
|
Putame G, Pascoletti G, Franceschini G, Dichio G, Terzini M. Prosthetic Hip ROM from Multibody Software Simulation. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2020; 2019:5386-5389. [PMID: 31947073 DOI: 10.1109/embc.2019.8856993] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Abstract
The pre-operative planning of a hip arthroplasty entails the choice of the prosthetic hip model and of the position of both joint components with reference to bone. Assessing the impact of geometrical factors on the final hip range of motion (ROM) is not trivial, since it requires performing 3D evaluations. Nonetheless, it deserves to be studied since hip impingement and dislocation are still relevant complications in hip arthroplasty. This work pertains a numerical model for the assessment of the hip ROM in relation to cotyle position. External/internal rotation is considered as a benchmark, and multiple combinations of acetabular anteversion/inclination are considered. According to results, over two hundred different geometric configurations can be examined in few minutes, and the cotyle position can be so optimized with relevant benefits in term of hip ROM.
Collapse
|
4
|
Pascoletti G, Catelani D, Conti P, Cianetti F, Zanetti EM. Multibody Models for the Analysis of a Fall From Height: Accident, Suicide, or Murder? Front Bioeng Biotechnol 2019; 7:419. [PMID: 31921822 PMCID: PMC6920173 DOI: 10.3389/fbioe.2019.00419] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/29/2019] [Accepted: 11/29/2019] [Indexed: 11/13/2022] Open
Abstract
The final subject position is often the only evidence in the case of the fall of a human being from a given height. Foreseeing the body trajectory and the respective driving force may not be trivial due to the possibility of rotations and to an unknown initial position and momentum of the subject. This article illustrates how multibody models can be used for this aim, with specific reference to an actual case, where a worker fell into a stair well, prior to stair mounting, and he was found in an unexpected posture. The aim of the analysis was establishing if this worker was dead in that same place, if he had been pushed, and which was his initial position. A multibody model of the subject has been built ("numerical android"), given his stature and his known mass. Multiple simulations have been performed, following a design of experiments where various initial positions and velocity as well as pushing forces have been considered, while the objective function to be minimized was the deviation of the numerical android position from the actual worker position. At the end of the analysis, it was possible to point how a very limited set of conditions, all including the application of an external pushing force (or initial speed), could produce the given final posture with an error on the distance function equal to 0.39 m. The full analysis gives a demonstration of the potentiality of multibody models as a tool for the analysis of falls in forensic inquiries.
Collapse
Affiliation(s)
| | | | - Paolo Conti
- Department of Engineering, University of Perugia, Perugia, Italy
| | - Filippo Cianetti
- Department of Engineering, University of Perugia, Perugia, Italy
| | | |
Collapse
|
5
|
Biomechanical Role and Motion Contribution of Ligaments and Bony Constraints in the Elbow Stability: A Preliminary Study. Bioengineering (Basel) 2019; 6:bioengineering6030068. [PMID: 31394803 PMCID: PMC6784216 DOI: 10.3390/bioengineering6030068] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2019] [Revised: 08/01/2019] [Accepted: 08/05/2019] [Indexed: 11/16/2022] Open
Abstract
In flexion–extension motion, the interaction of several ligaments and bones characterizes the elbow joint stability. The aim of this preliminary study was to quantify the relative motion of the ulna with respect to the humerus in two human upper limbs specimens and to investigate the constraints role for maintaining the elbow joint stability in different section conditions. Two clusters of four markers were fixed respectively to the ulna and humerus, and their trajectory was recorded by a motion capture system during functional orthopedic maneuver. Considering the posterior bundle of medial collateral complex (pMUCL) and the coronoid, two section sequences were executed. The orthopedic maneuver of compression, pronation and varus force was repeated at 30°, 60° and 90° flexion for the functional investigation of constraints. Ulna deflection was compared to a baseline elbow flexion condition. With respect to the intact elbow, the coronoid osteotomy influences the elbow stability at 90° (deflection = 11.49 ± 17.39 mm), while small differences occur at 30° and 60°, due to ligaments constraint. The contemporary pMUCL section and coronoid osteotomy causes elbow instability, with large deflection at 30° (deflection = 34.40 ± 9.10 mm), 60° (deflection = 45.41 ± 18.47 mm) and 90° (deflection = 52.16 ± 21.92 mm). Surgeons may consider the pMUCL reconstruction in case of unfixable coronoid fracture.
Collapse
|
6
|
Putame G, Terzini M, Bignardi C, Beale B, Hulse D, Zanetti E, Audenino A. Surgical Treatments for Canine Anterior Cruciate Ligament Rupture: Assessing Functional Recovery Through Multibody Comparative Analysis. Front Bioeng Biotechnol 2019; 7:180. [PMID: 31448269 PMCID: PMC6691022 DOI: 10.3389/fbioe.2019.00180] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/11/2019] [Accepted: 07/11/2019] [Indexed: 11/27/2022] Open
Abstract
Anterior cruciate ligament (ACL) deficiency can result in serious degenerative stifle injuries. Although tibial plateau leveling osteotomy (TPLO) is a common method for the surgical treatment of ACL deficiency, alternative osteotomies, such as a leveling osteotomy based on the center of rotation of angulation (CBLO) are described in the literature. However, whether a CBLO could represent a viable alternative to a TPLO remains to be established. The aim of this study is to compare TPLO and CBLO effectiveness in treating ACL rupture. First, a computational multibody model of a physiological stifle was created using three-dimensional surfaces of a medium-sized canine femur, tibia, fibula and patella. Articular contacts were modeled by means of a formulation describing the contact force as function of the interpenetration between surfaces. Moreover, ligaments were represented by vector forces connecting origin and insertion points. The lengths of the ligaments at rest were optimized simulating the drawer test. The ACL-deficient model was obtained by deactivating the ACL related forces in the optimized physiological one. Then, TPLO and CBLO treatments were virtually performed on the pathological stifle. Finally, the drawer test and a weight-bearing squat movement were performed to compare the treatments effectiveness in terms of tibial anteroposterior translation, patellar ligament force, intra-articular compressive force and quadriceps force. Results from drawer test simulations showed that ACL-deficiency causes an increase of the anterior tibial translation by up to 5.2 mm, while no remarkable differences between CBLO and TPLO were recorded. Overall, squat simulations have demonstrated that both treatments lead to an increase of all considered forces compared to the physiological model. Specifically, CBLO and TPLO produce an increase in compressive forces of 54% and 37%, respectively, at 90° flexion. However, TPLO produces higher compressive forces (up to 16%) with respect to CBLO for wider flexion angles ranging from 135° to 117°. Conversely, TPLO generates lower forces in patellar ligament and quadriceps muscle, compared to CBLO. In light of the higher intra-articular compressive force over the physiological walking range of flexion, which was observed to result from TPLO in the current study, the use of this technique should be carefully considered.
Collapse
Affiliation(s)
- Giovanni Putame
- PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy
| | - Mara Terzini
- PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy
| | - Cristina Bignardi
- PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy
| | - Brian Beale
- Gulf Coast Veterinary Specialists, Houston, TX, United States
| | - Don Hulse
- Austin Veterinary Emergency and Specialty Center, Austin, TX, United States
| | - Elisabetta Zanetti
- Department of Industrial Engineering, Università di Perugia, Perugia, Italy
| | - Alberto Audenino
- PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy
| |
Collapse
|
7
|
Pascoletti G, Cianetti F, Putame G, Terzini M, Zanetti EM. Numerical Simulation of an Intramedullary Elastic Nail: Expansion Phase and Load-Bearing Behavior. Front Bioeng Biotechnol 2018; 6:174. [PMID: 30525034 PMCID: PMC6258715 DOI: 10.3389/fbioe.2018.00174] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/23/2018] [Accepted: 11/02/2018] [Indexed: 11/29/2022] Open
Abstract
The Marchetti-Vicenzi's nail is an intramedullary device where six curved nails are kept straight by a closing ring in order to allow their insertion into the medullary canal of a long bone; in a following step, these nails stabilize the fracture due to the ring withdrawal and to the consequent elastic expansion of the nails. Pre-clinical testing of this sort of device is strongly advocated in order to be able to foresee their stability inside the medullary canal and to quantify their stiffening action on a broken bone. In this numerical work, an MB (Multi Body) model of the device has been developed, with the dual purpose of evaluating forces between the bone and the system components during its progressive opening and verifying the behavior of the stabilized bone when it undergoes external loading. Different solutions, for flexible body modeling (discretization with lumped parameters, “flexible body,” “FE Part”), have been analyzed and compared in terms of accuracy of results and required computational resources. Contact parameters have been identified and criteria to simplify geometries and therefore to reduce simulation times have been given. Results have allowed to demonstrate how a moderate lateral force is able to dislocate the fracture and how the final position of the retention nut can be optimized. On the whole, a tool for the pre-clinical testing of elastic intramedullary nails has been given.
Collapse
Affiliation(s)
| | - Filippo Cianetti
- Department of Engineering, University of Perugia, Perugia, Italy
| | - Giovanni Putame
- PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy
| | - Mara Terzini
- PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy
| | | |
Collapse
|
8
|
Jhan SW, Chou WY, Wu KT, Wang CJ, Yang YJ, Ko JY. Outcomes and factors of elbow arthroscopy upon returning to sports for throwing athletes with osteoarthritis. J Orthop Surg Res 2018; 13:280. [PMID: 30404660 PMCID: PMC6223086 DOI: 10.1186/s13018-018-0992-x] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 09/10/2018] [Accepted: 10/29/2018] [Indexed: 12/03/2022] Open
Abstract
Background Elbow arthroscopy had good functional outcome for throwing athletes. Returning to sports is a major concern for all athletes, but only a few reports have investigated the clinical factors related to the duration of returning to sports. The present study evaluates the efficacy of elbow arthroscopic surgery on throwing elbows with osteoarthritis and defines the clinical factors related to the duration of the returning to sports. Methods This was a retrospective study with fifteen active baseball throwing athletes with elbow osteoarthritis who were treated with elbow arthroscopy. Perioperative clinical factors were analyzed for functional outcomes. A multiple linear regression analysis was used to analyze the clinical factors associated with the duration of returning to training and sports. Results The 15 patients’ mean age was 27 years. The mean follow-up time was 2.6 years. The mean procedural complexity was 3.1 ± 1.6 (range 1–6). The elbow total range of motion (ROM) improved significantly from 100.7 ± 28.7° to 125.7 ± 18.5° (p = 0.001). The terminal flexion range of the elbow increased significantly from 116.0 ± 22.6° to 130.0 ± 13.2° (p = 0.001), and the terminal extension range improved from 15.3 ± 11.1° to 4.3 ± 5.9° (p = 0.001). Before the operation, the average subjective patient outcome for return to sports (SPORTS) score was 3.4 ± 1.5, which increased significantly to 9.67 ± 0.45 (p = 0.003) at the last follow-up. The multiple linear regression analysis revealed that higher procedural complexity hinders the athletes from returning to competition. Conclusions Elbow arthroscopy offered highly satisfactory results in the throwing elbows of elite athletes and significantly improved the range of motion and SPORTS score. The procedural complexity was significantly related to the duration of returning to competition. Early and aggressive arthroscopic intervention is recommended for elite throwing athletes with elbow osteoarthritis who fail to respond to conservative treatment.
Collapse
Affiliation(s)
- Shun-Wun Jhan
- Department of Orthopedic Surgery, Kaohsiung Chang Gung Memorial Hospital and Chang Gung University College of Medicine, 123 Ta Pei Road, Niao Sung Dist, Kaohsiung, Taiwan
| | - Wen-Yi Chou
- Department of Orthopedic Surgery, Kaohsiung Chang Gung Memorial Hospital and Chang Gung University College of Medicine, 123 Ta Pei Road, Niao Sung Dist, Kaohsiung, Taiwan.
| | - Kuan-Ting Wu
- Department of Orthopedic Surgery, Kaohsiung Chang Gung Memorial Hospital and Chang Gung University College of Medicine, 123 Ta Pei Road, Niao Sung Dist, Kaohsiung, Taiwan
| | - Ching-Jen Wang
- Department of Orthopedic Surgery, Kaohsiung Chang Gung Memorial Hospital and Chang Gung University College of Medicine, 123 Ta Pei Road, Niao Sung Dist, Kaohsiung, Taiwan.,Center for Shockwave Medicine and Tissue Engineering, Department of Medical Research, Kaohsiung Chang Gung Memorial Hospital and Chang Gung University College of Medicine, Kaohsiung, Taiwan
| | - Ya-Ju Yang
- Department of Orthopedic Surgery, Kaohsiung Chang Gung Memorial Hospital and Chang Gung University College of Medicine, 123 Ta Pei Road, Niao Sung Dist, Kaohsiung, Taiwan
| | - Jih-Yang Ko
- Department of Orthopedic Surgery, Kaohsiung Chang Gung Memorial Hospital and Chang Gung University College of Medicine, 123 Ta Pei Road, Niao Sung Dist, Kaohsiung, Taiwan.,Center for Shockwave Medicine and Tissue Engineering, Department of Medical Research, Kaohsiung Chang Gung Memorial Hospital and Chang Gung University College of Medicine, Kaohsiung, Taiwan
| |
Collapse
|