Effects of Cyclic Stress on the Mechanical Properties of Cultured Collagen Fascicles from the Rabbit Patellar Tendon

Focal adhesion kinase regulates tendon cell mechanoresponse and physiological tendon development

Tendons enable locomotion by transmitting high tensile mechanical forces between muscle and bone via their dense extracellular matrix (ECM). The application of extrinsic mechanical stimuli via muscle contraction is necessary to regulate healthy tendon function. Specifically, applied physiological levels of mechanical loading elicit an anabolic tendon cell response, while decreased mechanical loading evokes a degradative tendon state. Although the tendon response to mechanical stimuli has implications in disease pathogenesis and clinical treatment strategies, the cell signaling mechanisms by which tendon cells sense and respond to mechanical stimuli within the native tendon ECM remain largely unknown. Therefore, we explored the role of cell-ECM adhesions in regulating tendon cell mechanotransduction by perturbing the genetic expression and signaling activity of focal adhesion kinase (FAK) through both in vitro and in vivo approaches. We determined that FAK regulates tendon cell spreading behavior and focal adhesion morphology, nuclear deformation in response to applied mechanical strain, and mechanosensitive gene expression. In addition, our data reveal that FAK signaling plays an essential role in in vivo tendon development and postnatal growth, as FAK-knockout mouse tendons demonstrated reduced tendon size, altered mechanical properties, differences in cellular composition, and reduced maturity of the deposited ECM. These data provide a foundational understanding of the role of FAK signaling as a critical regulator of in situ tendon cell mechanotransduction. Importantly, an increased understanding of tendon cell mechanotransductive mechanisms may inform clinical practice as well as lead to the discovery of diagnostic and/or therapeutic molecular targets.

In situ FRET measurement of cellular tension using conventional confocal laser microscopy in newly established reporter mice expressing actinin tension sensor

FRET-based sensors are utilized for real-time measurements of cellular tension. However, transfection of the sensor gene shows low efficacy and is only effective for a short period. Reporter mice expressing such sensors have been developed, but sensor fluorescence has not been measured successfully using conventional confocal microscopy. Therefore, methods for spatiotemporal measurement of cellular tension in vivo or ex vivo are still limited. We established a reporter mouse line expressing FRET-based actinin tension sensors consisting of EGFP as the donor and mCherry as the acceptor and whose FRET ratio change is observable with confocal microscopy. Tension-induced changes in FRET signals were monitored in the aorta and tail tendon fascicles, as well as aortic smooth muscle cells isolated from these mice. The pattern of FRET changes was distinctive, depending on tissue type. Indeed, aortic smooth muscle cells exhibit different sensitivity to macroscopic tensile strain in situ and in an isolated state. This mouse strain will enable novel types of biomechanical investigations of cell functions in important physiological events.

Scaffold-Mediated Immunoengineering as Innovative Strategy for Tendon Regeneration

Tendon injuries are at the frontier of innovative approaches to public health concerns and sectoral policy objectives. Indeed, these injuries remain difficult to manage due to tendon’s poor healing ability ascribable to a hypo-cellularity and low vascularity, leading to the formation of a fibrotic tissue affecting its functionality. Tissue engineering represents a promising solution for the regeneration of damaged tendons with the aim to stimulate tissue regeneration or to produce functional implantable biomaterials. However, any technological advancement must take into consideration the role of the immune system in tissue regeneration and the potential of biomaterial scaffolds to control the immune signaling, creating a pro-regenerative environment. In this context, immunoengineering has emerged as a new discipline, developing innovative strategies for tendon injuries. It aims at designing scaffolds, in combination with engineered bioactive molecules and/or stem cells, able to modulate the interaction between the transplanted biomaterial-scaffold and the host tissue allowing a pro-regenerative immune response, therefore hindering fibrosis occurrence at the injury site and guiding tendon regeneration. Thus, this review is aimed at giving an overview on the role exerted from different tissue engineering actors in leading immunoregeneration by crosstalking with stem and immune cells to generate new paradigms in designing regenerative medicine approaches for tendon injuries.

Tendinopathy and tendon material response to load: What we can learn from small animal studies

Tendinopathy is a debilitating disease that causes as much as 30% of all musculoskeletal consultations. Existing treatments for tendinopathy have variable efficacy, possibly due to incomplete characterization of the underlying pathophysiology. Mechanical load can have both beneficial and detrimental effects on tendon, as the overall tendon response depends on the degree, frequency, timing, and magnitude of the load. The clinical continuum model of tendinopathy offers insight into the late stages of tendinopathy, but it does not capture the subclinical tendinopathic changes that begin before pain or loss of function. Small animal models that use high tendon loading to mimic human tendinopathy may be able to fill this knowledge gap. The goal of this review is to summarize the insights from in-vivo animal studies of mechanically-induced tendinopathy and higher loading regimens into the mechanical, microstructural, and biological features that help characterize the continuum between normal tendon and tendinopathy. STATEMENT OF SIGNIFICANCE: This review summarizes the insights gained from in-vivo animal studies of mechanically-induced tendinopathy by evaluating the effect high loading regimens have on the mechanical, structural, and biological features of tendinopathy. A better understanding of the interplay between these realms could lead to improved patient management, especially in the presence of painful tendon.

Biomaterials to Mimic and Heal Connective Tissues

Connective tissue is one of the four major types of animal tissue and plays essential roles throughout the human body. Genetic factors, aging, and trauma all contribute to connective tissue dysfunction and motivate the need for strategies to promote healing and regeneration. The goal here is to link a fundamental understanding of connective tissues and their multiscale properties to better inform the design and translation of novel biomaterials to promote their regeneration. Major clinical problems in adipose tissue, cartilage, dermis, and tendon are discussed that inspire the need to replace native connective tissue with biomaterials. Then, multiscale structure-function relationships in native soft connective tissues that may be used to guide material design are detailed. Several biomaterials strategies to improve healing of these tissues that incorporate biologics and are biologic-free are reviewed. Finally, important guidance documents and standards (ASTM, FDA, and EMA) that are important to consider for translating new biomaterials into clinical practice are highligted.

Dynamic Loading and Tendon Healing Affect Multiscale Tendon Properties and ECM Stress Transmission

The extracellular matrix (ECM) is the primary biomechanical environment that interacts with tendon cells (tenocytes). Stresses applied via muscle contraction during skeletal movement transfer across structural hierarchies to the tenocyte nucleus in native uninjured tendons. Alterations to ECM structural and mechanical properties due to mechanical loading and tissue healing may affect this multiscale strain transfer and stress transmission through the ECM. This study explores the interface between dynamic loading and tendon healing across multiple length scales using living tendon explants. Results show that macroscale mechanical and structural properties are inferior following high magnitude dynamic loading (fatigue) in uninjured living tendon and that these effects propagate to the microscale. Although similar macroscale mechanical effects of dynamic loading are present in healing tendon compared to uninjured tendon, the microscale properties differed greatly during early healing. Regression analysis identified several variables (collagen and nuclear disorganization, cellularity, and F-actin) that directly predict nuclear deformation under loading. Finite element modeling predicted deficits in ECM stress transmission following fatigue loading and during healing. Together, this work identifies the multiscale response of tendon to dynamic loading and healing, and provides new insight into microenvironmental features that tenocytes may experience following injury and after cell delivery therapies.

De novo generation in an in vivo rat model and biomechanical characterization of autologous transplants for ligament and tendon reconstruction

BACKGROUND

Surgical reconstruction of ligaments and tendons is frequently required in clinical practice. The commonly used autografts, allografts, or synthetic transplants present limitations in terms of availability, biocompatibility, cost, and mechanical properties that tissue bioengineering aims to overcome. It classically combines an exogenous extracellular matrix with cells, but this approach remains complex and expensive. Using a rat model, we tested a new bioengineering strategy for the in vivo and de novo generation of autologous grafts without the addition of extracellular matrix or cells, and analyzed their biomechanical and structural properties.

METHODS

A silicone perforated tubular implant (PTI) was designed and implanted in the spine of male Wistar rats to generate neo-transplants. The tensile load to failure, stiffness, Young modulus, and ultrastructure of the generated tissue were determined at 6 and 12weeks after surgery. The feasibility of using the transplant that was generated in the spine as an autograft for reconstruction of medial collateral ligaments (MCL) and Achilles tendons was also tested.

FINDINGS

Use of the PTI resulted in de novo transplant generation. Their median load to failure and Young modulus increased between 6 and 12weeks (respectively 12N vs 34N and 48MPa vs 178MPa). At 12weeks, the neo-transplants exhibited collagen bundles (mainly type III) parallel to their longitudinal axis and elongated fibroblasts. Six weeks after their transfer to replace the MCL or the Achilles tendon, the transplants were still present, with their ends healed at their insertion point.

INTERPRETATION

This animal study is a first step in the design and validation of a new bioengineering strategy to develop autologous transplants for ligament and tendon reconstructions.

An in vitro scratch tendon tissue injury model: effects of high frequency low magnitude loading

The healing process of ruptured tendons is suboptimal, taking months to achieve tissue with inferior properties to healthy tendon. Mechanical loading has been shown to positively influence tendon healing. However, high frequency low magnitude (HFLM) loads, which have shown promise in maintaining healthy tendon properties, have not been studied with in vitro injury models. Here, we present and validate an in vitro scratch tendon tissue injury model to investigate effects of HFLM loading on the properties of injured rat tail tendon fascicles (RTTFs). A longitudinal tendon tear was simulated using a needle aseptically to scratch a defined length along individual RTTFs. Tissue viability, biomechanical, and biochemical parameters were investigated before and 7 days after culture . The effects of static, HFLM (20 Hz), and low frequency (1 Hz) cyclic loading or no load were also investigated. Tendon viability was confirmed in damaged RTTFs after 7 days of culture, and the effects of a 0.77 ± 0.06 cm scratch on the mechanical property (tangent modulus) and tissue metabolism in damaged tendons were consistent, showing significant damage severity compared with intact tendons. Damaged tendon fascicles receiving HFLM (20 Hz) loads displayed significantly higher mean tangent modulus than unloaded damaged tendons (212.7 ± 14.94 v 92.7 ± 15.59 MPa), and damaged tendons receiving static loading (117.9 ± 10.65 MPa). HFLM stimulation maintained metabolic activity in 7-day cultured damaged tendons at similar levels to fresh tendons immediately following damage. Only damaged tendons receiving HFLM loads showed significantly higher metabolism than unloaded damaged tendons (relative fluorescence units -7021 ± 635.9 v 3745.1 ± 641.7). These validation data support the use of the custom-made in vitro injury model for investigating the potential of HFLM loading interventions in treating damaged tendons.

The (dys)functional extracellular matrix

The extracellular matrix (ECM) is a major component of the biomechanical environment with which cells interact, and it plays important roles in both normal development and disease progression. Mechanical and biochemical factors alter the biomechanical properties of tissues by driving cellular remodeling of the ECM. This review provides an overview of the structural, compositional, and mechanical properties of the ECM that instruct cell behaviors. Case studies are reviewed that highlight mechanotransduction in the context of two distinct tissues: tendons and the heart. Although these two tissues demonstrate differences in relative cell-ECM composition and mechanical environment, they share similar mechanisms underlying ECM dysfunction and cell mechanotransduction. Together, these topics provide a framework for a fundamental understanding of the ECM and how it may vary across normal and diseased tissues in response to mechanical and biochemical cues. This article is part of a Special Issue entitled: Mechanobiology.

EFFECTS OF CULTURE PERIODS AND LOADING ON BIOMECHANICAL PROPERTIES OF SHEEP COLLAGEN FASCICLES

Soft tissues (e.g., tendon, skin, cartilage) change their dimensions and properties in response to applied mechanical stress/strain, which is called remodeling. Experimental studies using tissue cultures were performed to understand the biomechanical properties of collagen fascicles under mechanical loads. Collagen fascicles were dissected from sheep Achilles tendons and loaded under 1, 2, and 3 kg for 2, 4, and 6 days under culture. The mechanical properties of collagen fascicles after being loaded into the culture media were determined using tensile tester, and resultant stress–strain curves, tangent modulus, tensile strength, and strain at failure values were compared with those in a non-loaded and non-cultured control group of fascicles. The tangent modulus and tensile strength of the collagen fascicles increased with the increasing remodeling load after two days of culture. However, these values gradually decreased with the increasing culture period compared with the control group. According to the results obtained in this study, the mechanical properties of collagen fascicles were improved by loading at two days of culture, most likely due to the remodeling of collagen fibers. However, after a period of remodeling, local strains on the collagen fibrils increased, and finally, the collagen fibrils broke down, decreasing the mechanical properties of the tissue.

Human Achilles tendon plasticity in response to cyclic strain: effect of rate and duration

High strain magnitude and low strain frequency are important stimuli for tendon adaptation. Increasing the rate and duration of the applied strain may enhance the adaptive responses. Therefore, our purpose was to investigate the effect of strain rate and duration on Achilles tendon adaptation. The study included two experimental groups (N=14 and N=12) and a control group (N=13). The participants of the experimental groups exercised according to a reference protocol (14 weeks, four times a week), featuring a high strain magnitude (~6.5%) and a low strain frequency (0.17 Hz, 3 s loading/3 s relaxation) on one leg and with either a higher strain rate (one-legged jumps) or a longer strain duration (12 s loading) on the other leg. The strain magnitude and loading volume were similar in all protocols. Before and after the interventions, the tendon stiffness, Young's modulus and cross-sectional area were examined using magnetic resonance imaging, ultrasound and dynamometry. The reference and long strain duration protocols induced significantly increased (P<0.05) tendon stiffness (57% and 25%), cross-sectional area (4.2% and 5.3%) and Young's modulus (51% and 17%). The increases in tendon stiffness and Young's modulus were higher in the reference protocol. Although region-specific tendon hypertrophy was also detected after the high strain rate training, there was only a tendency of increased stiffness (P=0.08) and cross-sectional area (P=0.09). The control group did not show any changes (P=0.86). The results provide evidence that a high strain magnitude, an appropriate strain duration and repetitive loading are essential components for an efficient adaptive stimulus for tendons.

The role of mechanobiology in tendon healing

Mechanical cues affect tendon healing, homeostasis, and development in a variety of settings. Alterations in the mechanical environment are known to result in changes in the expression of extracellular matrix proteins, growth factors, transcription factors, and cytokines that can alter tendon structure and cell viability. Loss of muscle force in utero or in the immediate postnatal period delays tendon and enthesis development. The response of healing tendons to mechanical load varies depending on anatomic location. Flexor tendons require motion to prevent adhesion formation, yet excessive force results in gap formation and subsequent weakening of the repair. Excessive motion in the setting of anterior cruciate ligament reconstruction causes accumulation of macrophages, which are detrimental to tendon graft healing. Complete removal of load is detrimental to rotator cuff healing; yet, large forces are also harmful. Controlled loading can enhance healing in most settings; however, a fine balance must be reached between loads that are too low (leading to a catabolic state) and too high (leading to microdamage). This review will summarize existing knowledge of the mechanobiology of tendon development, homeostasis, and healing.

Three-dimensional-construct bioreactor conditioning in human tendon tissue engineering

Human tendon tissue engineering attempts to address the shortage of autologous tendon material arising from mutilating injuries and diseases of the hand and forearm. It is important to maximize the tissue-engineered construct's (TEC's) biomechanical properties to ensure that the construct is in its strongest possible state before reimplantation. In this study, we sought to determine the bioreactor treatment parameters that affect these properties. Using small- and large-chamber three-dimensional-construct bioreactors (SCB and LCB, respectively), we applied cyclic axial load to TECs comprising reseeded human flexor and extensor tendons of the hand. First, small-sample pilot studies using the LCB were performed on matched-paired full-length flexor tendons to establish proof of concept. Next, large-sample studies using the SCB were performed on matched-paired extensor tendon segments to determine how reseeding, load duty cycle, load magnitude, conditioning duration, and testing delay affected ultimate tensile stress (UTS) and elastic modulus (EM). We found that compared with reseeded matched-paired controls under dynamic-loading at 1.25 N per TEC for 5 days, (1) acellular TECs had lower UTS (p=0.04) and EM (p<0.01), (2) unloaded TECs had lower UTS (p=0.01) and EM (p=0.02), (3) static-loaded TECs had lower UTS (p=0.01) and EM (p<0.01), (4) TECs conditioned for 3 days had lower UTS (p=0.03) and EM (p=0.04), and (5) TECs conditioned for 8 days had higher UTS (p=0.04) and EM (p=0.01). However, TECs conditioned at higher loads (2.5 N per TEC) and lower loads (0.625 N per TEC) possessed similar UTS (p=0.83 and p=0.89, respectively) and EM (p=0.48 and p=0.89, respectively) as controls stimulated with 1.25 N per TEC. After cycle completion, there is attrition of UTS (p=0.03) and EM (p=0.04) over a 2-day period. Our study showed that the material properties of human allograft TECs can be enhanced by reseeding and dynamic-conditioning. While conditioning duration has a significant effect on material properties, the load magnitude does not. The issue of attrition in biomechanical properties with time following cycle completion must be addressed before bioreactor preconditioning can be successfully introduced as a step in the processing of these constructs for clinical application.

Functional analysis of tenocytes gene expression in tendon fascicles subjected to cyclic tensile strain

Tenocytes are known to be mechanoresponsive and the present study tests the hypothesis that distinct mechanical stimulation regimes, associated with the short-term and extended application of cyclic tensile strain, alters the balance between anabolic and catabolic processes. Microarray technology has been used to provide a comprehensive analysis of alterations in gene expression within isolated tendon fascicles in response to cyclic tensile strain using a well-established model system. Isolated rat tail tendon fascicles were subjected to cyclic tensile strain (3% amplitude superimposed on a 2% static strain) for 1 or 24 hr. Messenger RNA expression level was assessed using Illumina microarray. The number of genes significantly altered in strained fascicles from the level of unstrained control fascicles was greater at 24 hr than 1 hr. The expression levels of many extracellular matrix components remained unchanged at both time points; however, a number of members of the matrix metalloproteinase (MMP) and a disintegrin and metalloproteinase with a thrombospondin (ADAMTS) families were significantly downregulated at 24 hr. Functional annotation revealed that upregulated genes were significantly associated with the regulation of transcription at 1 hr and translation at 24 hr. Downregulated genes were associated with inflammatory responses at 1 hr, and genes inhibited at 24 hr were significantly associated with cell apoptosis and a variety of metabolic functions. The present results suggest that the metabolic balance was shifted in favor of catabolism by the application of a small number of tensile strain cycles, whereas an extended number stimulates strong anti-catabolic effects.

Plasticity of human Achilles tendon mechanical and morphological properties in response to cyclic strain

The purpose of the current study in combination with our previous published data (Arampatzis et al., 2007) was to examine the effects of a controlled modulation of strain magnitude and strain frequency applied to the Achilles tendon on the plasticity of tendon mechanical and morphological properties. Eleven male adults (23.9 ± 2.2 yr) participated in the study. The participants exercised one leg at low magnitude tendon strain (2.97 ± 0.47%), and the other leg at high tendon strain magnitude (4.72 ± 1.08%) of similar frequency (0.5 Hz, 1s loading, 1s relaxation) and exercise volume (integral of the plantar flexion moment over time) for 14 weeks, 4 days per week, 5 sets per session. The exercise volume was similar to the intervention of our earlier study (0.17 Hz frequency; 3s loading, 3s relaxation) allowing a direct comparison of the results. Before and after the intervention ankle joint moment has been measured by a dynamometer, tendon-aponeurosis elongation by ultrasound and cross-sectional area of the Achilles tendon by magnet resonance images (MRI). We found a decrease in strain at a given tendon force, an increase in tendon-aponeurosis stiffness and tendon elastic modulus of the Achilles tendon only in the leg exercised at high strain magnitude. The cross-sectional area (CSA) of the Achilles tendon did not show any statistically significant (P > 0.05) differences to the pre-exercise values in both legs. The results indicate a superior improvement in tendon properties (stiffness, elastic modulus and CSA) at the low frequency (0.17 Hz) compared to the high strain frequency (0.5 Hz) protocol. These findings provide evidence that the strain magnitude applied to the Achilles tendon should exceed the value, which occurs during habitual activities to trigger adaptational effects and that higher tendon strain duration per contraction leads to superior tendon adaptational responses.

Viscoelastic and failure properties of spine ligament collagen fascicles

The microstructural volume fractions, orientations, and interactions among components vary widely for different ligament types. If these variations are understood, however, it is conceivable to develop a general ligament model that is based on microstructural properties. This paper presents a part of a much larger effort needed to develop such a model. Viscoelastic and failure properties of porcine posterior longitudinal ligament (PLL) collagen fascicles were determined. A series of subfailure and failure tests were performed at fast and slow strain rates on isolated collagen fascicles from porcine lumbar spine PLLs. A finite strain quasi-linear viscoelastic model was used to fit the fascicle experimental data. There was a significant strain rate effect in fascicle failure strain (P < 0.05), but not in failure force or failure stress. The corresponding average fast-rate and slow-rate failure strains were 0.098 ± 0.062 and 0.209 ± 0.081. The average failure force for combined fast and slow rates was 2.25 ± 1.17 N. The viscoelastic and failure properties in this paper were used to develop a microstructural ligament failure model that will be published in a subsequent paper.

Bioreactors for tissues of the musculoskeletal system

Muskuloskeletal tissue includes bone, cartilage, ligament, skeletal muscle and tendons. These tissues malfunction either due to a natural injury, trauma, or a disorder. In all cases natural regeneration needs to be enhanced by medication and, in many instances, by surgery. Surgical techniques are limited to suturing, autografts or allografts. Tissue engineering stems from the challenge presented by the limited resources for natural implants and the ineffectiveness of previous curing techniques. The challenge in tissue engineering resides in the design of a functional bioreactor that would: (1) house the engineered construct under sterile conditions; and (2) provide the appropriate stimuli that would result in a neotissue with biochemical and biomechanical properties comparable to in situ tissue. The various types and designs of bioreactors for the regeneration of musculoskeletal tissue, including spinner flask, rotating wall vessel, flow perfusion, and mechanical loading devices are presented in this paper.

Adaptational responses of the human Achilles tendon by modulation of the applied cyclic strain magnitude

Tendons are able to remodel their mechanical and morphological properties in response to mechanical loading. However, there is little information about the effects of controlled modulation in cyclic strain magnitude applied to the tendon on the adaptation of tendon's properties in vivo. The present study investigated whether the magnitude of the mechanical load induced as cyclic strain applied to the Achilles tendon may have a threshold in order to trigger adaptation effects on tendon mechanical and morphological properties. Twenty-one adults (experimental group, N=11; control group, N=10) participated in the study. The participants of the experimental group exercised one leg at low-magnitude tendon strain (2.85+/-0.99%) and the other leg at high-magnitude tendon strain (4.55+/-1.38%) of similar frequency and volume. After 14 weeks of exercise intervention we found a decrease in strain at a given tendon force, an increase in tendon-aponeurosis stiffness and tendon elastic modulus and a region-specific hypertrophy of the Achilles tendon only in the leg exercised at high strain magnitude. These findings provide evidence of the existence of a threshold or set-point at the applied strain magnitude at which the transduction of the mechanical stimulus may influence the tensional homeostasis of the tendons. The results further show that the mechanical load exerted on the Achilles tendon during the low-strain-magnitude exercise is not a sufficient stimulus for triggering further adaptation effects on the Achilles tendon than the stimulus provided by the mechanical load applied during daily activities.

Biomechanical response of collagen fascicles to restressing after stress deprivation during culture

In vitro tissue culture experiments were performed to study the biomechanical response of collagen fascicles to restressing after exposure to non-loaded condition. Collagen fascicles of approximately 300 microm in diameter were aseptically dissected from rabbit patellar tendons. They were cultured under no-load condition for 1 week, and then under a static stress of approximately 1.2 MPa for the subsequent 1 or 2 weeks. After culture, their mechanical properties were determined with a micro-tensile tester, and were compared to those of fascicles cultured under no-load condition and non-cultured, control fascicles. Tangent modulus and tensile strength of the non-loaded fascicles were significantly lower than those of the control fascicles at 1 week and gradually decreased thereafter. However, the modulus and strength were increased by restressing. After 2-week restressing, both parameters were significantly greater than those of the time-matched, non-loaded fascicles, although these values were still significantly lower than those of the control fascicles. That is, the application of stress after exposure to non-loaded condition suppressed the deterioration of the biomechanical properties of fascicles, although it did not improve. These results indicate that a short period of stressing is not sufficient for cultured collagen fascicles to completely recover their mechanical properties, if they are once exposed to no-stress condition even for a short period of time. These are similar to previous results observed in tendons and ligaments inside the body.

Mechanical properties of the triceps surae tendon and aponeurosis in relation to intensity of sport activity

The purpose of the present study was to investigate whether the mechanical properties (i.e. force strain relationship) of the triceps surae tendon and aponeurosis relate to the performed sport activity in an intensity-dependent manner. This was done by comparing sprinters with endurance runners and subjects not active in sports. Sixty-six young male subjects (26+/-5 yr; 183+/-6 cm; 77.6+/-6.7 kg) participated in the study. Ten of these subjects were adults not active in sports, 28 were endurance runners and 28 sprinters. All subjects performed isometric maximal voluntary plantar flexion contractions (MVC) on a dynamometer. The distal aponeuroses of the gastrocnemius medialis (GM) was visualised by ultrasound during the MVC. The results showed that only the sprinters had higher normalised stiffness (relationship between tendon force and tendon strain) of the triceps surae tendon and aponeurosis and maximal calculated tendon forces than the endurance runners and the subjects not active in sports. Furthermore, including the data of all 66 examined participants tendon stiffness correlated significantly (r=0.817, P<0.001) with the maximal tendon force achieved during the MVC. It has been concluded that the mechanical properties of the triceps surae tendon and aponeurosis do not show a graded response to the intensity of the performed sport activity but rather remain at control level in a wide range of applied strains and that strain amplitude and/or frequency should exceed a given threshold in order to trigger additional adaptation effects. The results further indicate that subjects with higher muscle strength possibly increase the margin of tolerated mechanical loading of the tendon due to the greater stiffness of their triceps surae tendon and aponeurosis.

Age-dependent changes in the mechanical properties of tail tendons in TGF-β inducible early gene-1 knockout mice

The purpose of this study is to investigate age-dependent changes in the architecture and mechanical properties of tendon in TGF-β inducible early gene-1 (TIEG) knockout mice. Wild-type and TIEG knockout mice, aged 1, 2, and 15 mo, were used. The mechanical properties of tail tendons isolated from these mice were determined using uniaxial tensile ramp (0.05 mm/s) and relaxation (5 mm/s) tests, with a strain of 10%. Mechanical parameters (Young's modulus from the ramp test; fast and static stresses from the relaxation test) were measured and recorded. The structure of the tail tendon fascicle was characterized by transmission electron microscopy. The results of the mechanical testing revealed no significant difference between the knockout and wild-type groups at 1 or 15 mo of age. However, the fascicles of the knockout mice at 3 mo of age exhibited decreased fast and static stresses compared with those of the wild-type mice. Electron microscopy revealed an increase in fibril size in the knockout mouse tendons relative to wild-type controls at 1 and 3 mo of age. These data indicate an important role for TIEG in tendon microarchitecture and strength in adult mice.

Effects of the Frequency and Duration of Cyclic Stress on the Mechanical Properties of Cultured Collagen Fascicles From the Rabbit Patellar Tendon

The effects of frequency or duration of cyclic stress on the mechanical properties of collagen fascicles were studied by means of in vitro tissue culture experiments. Collagen fascicles of approximately 300μm in diameter were obtained from rabbit patellar tendons. During culture, cyclic stress having the peak stress of approximately 2MPa was applied to the fascicles at 1Hz for 1hour∕day (1Hz-1h group), at 1Hz for 4hours∕day (1Hz-4h group), or at 4Hz for 1hour∕day (4Hz-1h group). The frequency of 4Hz and the duration of 1hour∕day are considered to be similar to those of the in vivo stress applied to fascicles in the intact rabbit patellar tendon. After culture for 1 or 2weeks, the mechanical properties of the fascicles were determined using a micro-tensile tester, and were compared to the properties of non-cultured, fresh fascicles (control group) and the fascicles cultured under no load condition (non-loaded group). The tangent modulus and tensile strength of fascicles in the 4Hz-1h group were similar to those in the control group; however, the fascicles of the 1Hz-1h and 1Hz-4h groups had significantly lower values than those of the control group. There was no significant difference in the tensile strength between the 1Hz-1h and non-loaded groups, although the strength in the 1Hz-4h group was significantly higher than that of the non-loaded group. It was concluded that the frequency and duration of cyclic stress significantly affect the mechanical properties of cultured collagen fascicles. If we apply cyclic stress having the frequency and duration which are experienced in vivo, the biomechanical properties are maintained at control, normal level. Lower frequencies or less cycles of applied force induce adverse effects.