Influence of cell deformation on leukocyte rolling adhesion in shear flow

GEF-H1 Is Required for Colchicine Inhibition of Neutrophil Rolling and Recruitment in Mouse Models of Gout

Gout is a painful arthritic inflammatory disease caused by buildup of monosodium urate (MSU) crystals in the joints. Colchicine, a microtubule-depolymerizing agent that is used in prophylaxis and treatment of acute gout flare, alleviates the painful inflammatory response to MSU crystals. Using i.p. and intra-articular mouse models of gout-like inflammation, we found that GEF-H1/GEF-H1/AHRGEF2, a microtubule-associated Rho-GEF, was necessary for the inhibitory effect of colchicine on neutrophil recruitment. GEF-H1 was required for neutrophil polarization in response to colchicine, characterized by uropod formation, accumulation of F-actin and myosin L chain at the leading edge, and accumulation of phosphorylated myosin L chain, flotillin-2, and P-selectin glycoprotein ligand-1 (PSGL-1) in the uropod. Wild-type neutrophils that were pre-exposed to colchicine failed to roll or accumulate on activated endothelial monolayers, whereas GEF-H1 knockout (GEF-H1^-/-) neutrophils were unaffected by treatment with colchicine. In vivo, colchicine blocked MSU-induced recruitment of neutrophils to the peritoneum and the synovium in wild-type mice, but not in GEF-H1^-/- mice. Inhibition of macrophage IL-1β production by colchicine was independent of GEF-H1, supporting a neutrophil-intrinsic mode of action. Our results suggest that the anti-inflammatory effects of colchicine in acute gout-like inflammation can be accounted for by inhibition of neutrophil-rolling interactions with the inflamed vasculature and occurs through GEF-H1-dependent neutrophil stimulation by colchicine. These results contribute to our understanding of the therapeutic action of colchicine, and could inform the application of this drug in other conditions.

Role of mechanical stress and neutrophils in the pathogenesis of plaque erosion

Mechanical stress is a well-recognized driver of plaque rupture. Likewise, investigating the role of mechanical forces in plaque erosion has recently begun to provide some important insights, yet the knowledge is by far less advanced. The most significant example is that of shear stress, which has early been proposed as a possible driver for focal endothelial death and denudation. Recent findings using optical coherence tomography, computational sciences and mechanical models show that plaque erosion occurs most likely around atheromatous plaque throats with specific stress pattern. In parallel, we have recently shown that neutrophil-dependent inflammation promotes plaque erosion, possibly through a noxious action on ECs. Most importantly, spontaneous thrombosis - associated or not with EC denudation - can be impacted by hemodynamics, and it is now established that neutrophils promote thrombosis and platelet activation, highlighting a potential relationship between, mechanical stress, inflammation, and EC loss in the setting of coronary plaque erosion. Here, we review our current knowledge regarding the implication of both mechanical stress and neutrophils, and we discuss their implication in the promotion of plaque erosion via EC loss and thrombosis.

A shear assay study of single normal/breast cancer cell deformation and detachment from poly-di-methyl-siloxane (PDMS) surfaces

This paper presents the results of a combined experimental and analytical/computational study of viscoelastic cell deformation and detachment from poly-di-methyl-siloxane (PDMS) surfaces. Fluid mechanics and fracture mechanics concepts are used to model the detachment of biological cells observed under shear assay conditions. The analytical and computational models are used to compute crack driving forces, which are then related to crack extension during the detachment of normal breast cells and breast cancer cells from PDMS surfaces that are relevant to biomedical implants. The interactions between cells and the extracellular matrix, or the extracellular matrix and the PDMS substrate, are then characterized using force microscopy measurements of the pull-off forces that are used to determine the adhesion energies. Finally, fluorescence microscopy staining of the cytosketelal structures (actin, micro-tubulin and cyto-keratin), transmembrane proteins (vimentin) and the ECM structures (Arginin Glycine Aspartate - RGD) is used to show that the detachment of cells during the shear assay experiments occurs via interfacial cracking between (between the ECM and the cell membranes) with a high incidence of crack bridging by transmembrane vinculin structures that undergo pull-out until they detach from the actin cytoskeletal structure. The implications of the results are discussed for the design of interfaces that are relevant to implantable biomedical devices and normal/cancer tissue.

Differentiation of neutrophil-like HL-60 cells strongly impacts their rolling on surfaces with various adhesive properties under a pressing force

BACKGROUND

HL-60 cells have been used in in vitro experiments of neutrophils rolling. They lose uniform spherical appearance and enhance deformability by differentiation to neutrophil-like cells, which would affect their rolling characteristics.

OBJECTIVE

We investigate the influence of differentiation and coating of target substrate on the fundamental rolling characteristics of the cells under a constant pressing force which mimics the pressing force to the vessel wall by erythrocytes in vivo.

METHODS

Motions of undifferentiated and differentiated HL-60 cells on plain or MPC-polymer-coated flat glass substrate were compared using a homemade inclined centrifuge microscope system.

RESULTS

Most of the cells alternated between stop and go during the motion. The differentiation resulted in a high temporal ratio of the non-moving state and low mean velocity during the moving state, together with a high suppression performance of cell adhesion by the polymer. It was also suggested that the cells were mostly rolling but that the coating probably induced an infrequent slip on the substrate to stabilize the cells motion.

CONCLUSIONS

Differentiation strongly affects adhesivity of HL-60 cells but less affects the mean velocity. Our findings also demonstrate the importance of the pressing force and advantage of the present system with respect to classical flow chambers.

Biomimetic post-capillary venule expansions for leukocyte adhesion studies

Leukocyte adhesion and extravasation are maximal near the transition from capillary to post-capillary venule, and are strongly influenced by a confluence of scale-dependent physical effects. Mimicking the scale of physiological vessels using in vitro microfluidic systems allows the capture of these effects on leukocyte adhesion assays, but imposes practical limits on reproducibility and reliable quantification. Here we present a microfluidic platform that provides multiple (54-512) technical replicates within a 15-minute sample collection time, coupled with an automated computer vision analysis pipeline that captures leukocyte adhesion probabilities as a function of shear and extensional stresses. We report that in post-capillary channels of physiological scale, efficient leukocyte adhesion requires erythrocytes forcing leukocytes against the wall, a phenomenon that is promoted by the transitional flow in post-capillary venule expansions and dependent on the adhesion molecule ICAM-1.

Deformability of breast cancer cells in correlation with surface markers and cell rolling

Although the cancer stem cell (CSC) hypothesis has been around for many years, the reliability of cell-surface markers to classify CSCs has remained debatable. The finding that cancerous cells are significantly more deformable than healthy ones has provided motivation to consider mechanical properties as a possible biomarker for stemness. In this study, using the micropipette aspiration technique, mechanical properties of multiple breast cancer cell lines were investigated and correlated with breast cancer stem cell (BCSC) marker, CD44⁺/CD24^-/ALDH1⁺. The results indicated that Hs578T and MDA-MB-231 cell lines with CD44⁺/CD24^-/ALDH1⁺ phenotype were significantly more deformable than the MDA-MB-468 cell line, which did not express the BCSC marker. The BT-20 cell line with intermediate deformability did not express any CD44⁺/CD24^- phenotype, but it expressed aldehyde dehydrogenase-1 activity. In addition, more-deformable cell lines were found to roll with shear-independent velocities on E-selectin-coated substrates in a parallel-plate flow chamber, which might be a mediating factor for firm adhesion of CSCs to endothelium during metastasis. Our results indicate that rheological properties can be considered as a biomechanical marker in addition to, or as a complement of, surface markers to find more-definitive evidence of CSC characteristics within tumors.-Mohammadalipour, A., Burdick, M. M., Tees, D. F. J. Deformability of breast cancer cells in correlation with surface markers and cell rolling.

Role of the Cytoskeleton in Myeloid Cell Function

During an innate immune response, myeloid cells undergo complex morphological adaptations in response to inflammatory cues, which allow them to exit the vasculature, enter the tissues, and destroy invading pathogens. The actin and microtubule cytoskeletons are central to many of the most essential cellular functions including cell division, cell morphology, migration, intracellular trafficking, and signaling. Cytoskeletal structure and regulation are crucial for many myeloid cell functions, which require rapid and dynamic responses to extracellular signals. In this chapter, we review the roles of the actin and microtubule cytoskeletons in myeloid cells, focusing primarily on their roles in chemotaxis and phagocytosis. The role of myeloid cell cytoskeletal defects in hematological disorders is highlighted throughout.

Homocysteine-induced peripheral microcirculation dysfunction in zebrafish and its attenuation by L-arginine

Elevated blood homocysteine (Hcy) level is frequently observed in aged individuals and those with age-related vascular diseases. However, its effect on peripheral microcirculation is still not fully understood. Using in vivo zebrafish model, the degree of Hcy-induced peripheral microcirculation dysfunction is assessed in this study with a proposed dimensionless velocity parameter V¯CV​/ V¯PCV, where V¯CV and V¯PCV represent the peripheral microcirculation perfusion and the systemic perfusion levels, respectively. The ratio of the peripheral microcirculation perfusion to the systemic perfusion is largely decreased due to peripheral accumulation of neutrophils, while the systemic perfusion is relatively preserved by increased blood supply from subintestinal vein. Pretreatment with L-arginine attenuates the effects of Hcy on peripheral microcirculation and reduces the peripheral accumulation of neutrophils. Given its convenience, high reproducibility of the observation site, non-invasiveness, and the ease of drug treatment, the present zebrafish model with the proposed parameters will be used as a useful drug screening platform for investigating the pathophysiology of Hcy-induced microvascular diseases.

Computational study of cell adhesion and rolling in flow channel by meshfree method

Tethering and rolling of circulating leukocytes on the surface of endothelium are critical steps during an inflammatory response. A soft solid cell model was proposed to study monocytes tethering and rolling behaviors on substrate surface in shear flow. The interactions between monocytes and micro-channel surface were modeled by a coarse-grained molecular adhesive potential. The computational model was implemented in a Lagrange-type meshfree Galerkin formulation to investigate the monocyte tethering and rolling process with different flow rates. From the simulation results, it was found that the flow rate has profound effects on the rolling velocity, contact area and effective stress of monocytes. As the flow rate increased, the rolling velocity would increase linearly, whereas the contact area and average effective stress in monocyte showed nonlinear increase.

Mapping cell surface adhesion by rotation tracking and adhesion footprinting

Rolling adhesion, in which cells passively roll along surfaces under shear flow, is a critical process involved in inflammatory responses and cancer metastasis. Surface adhesion properties regulated by adhesion receptors and membrane tethers are critical in understanding cell rolling behavior. Locally, adhesion molecules are distributed at the tips of membrane tethers. However, how functional adhesion properties are globally distributed on the individual cell’s surface is unknown. Here, we developed a label-free technique to determine the spatial distribution of adhesive properties on rolling cell surfaces. Using dark-field imaging and particle tracking, we extract the rotational motion of individual rolling cells. The rotational information allows us to construct an adhesion map along the contact circumference of a single cell. To complement this approach, we also developed a fluorescent adhesion footprint assay to record the molecular adhesion events from cell rolling. Applying the combination of the two methods on human promyelocytic leukemia cells, our results surprisingly reveal that adhesion is non-uniformly distributed in patches on the cell surfaces. Our label-free adhesion mapping methods are applicable to the variety of cell types that undergo rolling adhesion and provide a quantitative picture of cell surface adhesion at the functional and molecular level.

Regulation of L-selectin-dependent hydrodynamic shear thresholding by leukocyte deformability and shear dependent bond number

BACKGROUND

During inflammation leukocyte attachment to the blood vessel wall is augmented by capture of near-wall flowing leukocytes by previously adherent leukocytes. Adhesive interactions between flowing and adherent leukocytes are mediated by L-selectin and P-selectin Glycoprotein Ligand-1 (PSGL-1) co-expressed on the leukocyte surface and ultimately regulated by hydrodynamic shear thresholding.

OBJECTIVE

We hypothesized that leukocyte deformability is a significant contributory factor in shear thresholding and secondary capture.

METHODS

Cytochalasin D (CD) was used to increase neutrophil deformability and fixation was used to reduce deformability. Neutrophil rolling on PSGL-1 coated planar surfaces and collisions with PSGL-1 coated microbeads were analyzed using high-speed videomicroscopy (250 fps).

RESULTS

Increased deformability led to an increase in neutrophil rolling flux on PSGL-1 surfaces while fixation led to a decrease in rolling flux. Abrupt drops in flow below the shear threshold resulted in extended release times from the substrate for CD-treated neutrophils, suggesting increased bond number. In a cell-microbead collision assay lower flow rates were correlated with briefer adhesion lifetimes and smaller adhesive contact patches.

CONCLUSIONS

Leukocyte deformation may control selectin bond number at the flow rates associated with hydrodynamic shear thresholding. Model analysis supported a requirement for both L-selectin catch-slip bond properties and multiple bond formation for shear thresholding.

Simulation and Analysis of Tethering Behavior of Neutrophils with Pseudopods

P-selectin and P-selectin glycoprotein ligand-1 (PSGL-1) play important roles in mediating the inflammatory cascade. Selectin kinetics, together with neutrophil hydrodynamics, regulate the fundamental adhesion cascade of cell tethering and rolling on the endothelium. The current study uses the Multiscale Adhesive Dynamics computational model to simulate, for the first time, the tethering and rolling behavior of pseudopod-containing neutrophils as mediated by P-selectin/PSGL-1 bonds. This paper looks at the effect of including P-selectin/PSGL-1 adhesion kinetics. The parameters examined included the shear rate, adhesion on-rate, initial neutrophil position, and receptor number sensitivity. The outcomes analyzed included types of adhesive behavior observed, tether rolling distance and time, number of bonds formed during an adhesive event, contact area, and contact time. In contrast to the hydrodynamic model, P-selectin/PSGL-1 binding slows the neutrophil’s translation in the direction of flow and causes the neutrophil to swing around perpendicular to flow. Several behaviors were observed during the simulations, including tethering without firm adhesion, tethering with downstream firm adhesion, and firm adhesion upon first contact with the endothelium. These behaviors were qualitatively consistent with in vivo data of murine neutrophils with pseudopods. In the simulations, increasing shear rate, receptor count, and bond formation rate increased the incidence of firm adhesion upon first contact with the endothelium. Tethering was conserved across a range of physiological shear rates and was resistant to fluctuations in the number of surface PSGL-1 molecules. In simulations where bonding occurred, interaction with the side of the pseudopod, rather than the tip, afforded more surface area and greater contact time with the endothelial wall.

Sticky surface: sphere-sphere adhesion dynamics

We present a multi-scale model to study the attachment of spherical particles with a rigid core, coated with binding ligands and suspended in the surrounding, quiescent fluid medium. This class of fluid-immersed adhesion is widespread in many natural and engineering settings, particularly in microbial surface adhesion. Our theory highlights how the micro-scale binding kinetics of these ligands, as well as the attractive/repulsive surface potential in an ionic medium affects the eventual macro-scale size distribution of the particle aggregates (flocs). The bridge between the micro-macro model is made via an aggregation kernel. Results suggest that the presence of elastic ligands on the particle surface lead to the formation of larger floc aggregates via efficient inter-floc collisions (i.e. non-zero sticking probability, g). Strong electrolytic composition of the surrounding fluid favours large floc formation as well. The kernel for the Brownian diffusion for hard spheres is recovered in the limit of perfect binding effectiveness (g→1) and in a neutral solution with no dissolved salts.

Non-labeled monitoring of targeted liposome interactions with a model receptor surface: effect of flow rate and water content

In this study, we present a novel in vitro approach that utilizes two surface-sensitive and label-free techniques, i.e. surface plasmon resonance (SPR) and quartz crystal microbalance (QCM), to study the interfacial events during liposome-target surface interactions. The flow channels of SPR and QCM devices were first synchronized via hydrodynamic modeling. Biotin-streptavidin was used as a model pair and self-assembled monolayers (SAMs) were utilized as model surfaces for targeted liposome-surface interaction studies. The interactions between biotin-liposomes and the streptavidin-biotin-SAM surfaces were investigated under controlled shear flows using the synchronized SPR and QCM devices. The response of the liposome interaction was monitored as a function of the flow rate. The affinity and the amount of bound liposome indicated that the increased flow rate improved the binding of the targeted liposomes to the model membrane surfaces. The combined use of the synchronized SPR and QCM devices for nanoparticle interaction studies clearly demonstrates the effect of the flow rate (or the shear stress) on the liposome binding. Our results suggest that the binding of liposomes to the model membranes is flow rate and shear stress regulated. Thus, the flow rate (or the shear stress), which is usually neglected, should be taken into account during the development and optimization of targeted liposome formulations. In addition, the water content within the liposome layer (including the water inside the liposomes and the water between the liposomes) had a significant influence on the visco-elasticity and the binding kinetics to the SAM surfaces.

Impact of flow on ligand-mediated bacterial flocculation

To understand the adhesion-fragmentation dynamics of bacterial aggregates (i.e., flocs), we model the aggregates as two ligand-covered rigid spheres. We develop and investigate a model for the attachment/detachment dynamics in a fluid subject to a homogeneous planar shear-flow. The binding ligands on the surface of the flocs experience attractive and repulsive surface forces in an ionic medium and exhibit finite resistance to rotation (via bond tilting). For certain range of material and fluid parameters, our results predict a nonlinear or hysteretic relationship between the binding/unbinding of the floc surface and the net floc velocity (translational plus rotational velocity). We show that the surface adhesion is promoted by increased fluid flow until a critical value, beyond which the bonds starts to yield. Moreover, adhesion is not promoted in a medium with low ionic strength, or flocs with bigger size or higher binder stiffness. The numerical simulations of floc-aggregate number density studies support these findings.

Effects of microfluidic channel geometry on leukocyte rolling assays

Microfluidic cell adhesion assays have emerged as a means to increase throughput as well as reduce the amount of costly reagents. However as dimensions of the flow chamber are reduced and approach the diameter of a cell (D(c)), theoretical models have predicted that mechanical stress, force, and torque on a cell will be amplified. We fabricated a series of microfluidic devices that have a constant width:height ratio (10:1) but with varying heights. The smallest microfluidic device (200 μm ×20 μm) requires perfusion rates as low as 40 nL/min to generate wall shear stresses of 0.5 dynes/cm(2). When neutrophils were perfused through P-selectin coated chambers at equivalent wall shear stress, rolling velocities decreased by approximately 70 % as the ratio of cell diameter to chamber height (D(c)/H) increased from 0.08 (H = 100 μm) to 0.40 (H = 20 μm). Three-dimensional numerical simulations of neutrophil rolling in channels of different heights showed a similar trend. Complementary studies with PSGL-1 coated microspheres and paraformaldehyde-fixed neutrophils suggested that changes in rolling velocity were related to cell deformability. Using interference reflection microscopy, we observed increases in neutrophil contact area with increasing chamber height (9-33 %) and increasing wall shear stress (28-56 %). Our results suggest that rolling velocity is dependent not only on wall shear stress but also on the shear stress gradient experienced by the rolling cell. These results point to the D(c)/H ratio as an important design parameter of leukocyte microfluidic assays, and should be applicable to rolling assays that involve other cell types such as platelets or cancer cells.

Probing the cytoadherence of malaria infected red blood cells under flow

Malaria is one of the most widespread and deadly human parasitic diseases caused by the Plasmodium (P.) species with the P.falciparum being the most deadly. The parasites are capable of invading red blood cells (RBCs) during infection. At the late stage of parasites’ development, the parasites export proteins to the infected RBCs (iRBC) membrane and bind to receptors of surface proteins on the endothelial cells that line microvasculature walls. Resulting adhesion of iRBCs to microvasculature is one of the main sources of most complications during malaria infection. Therefore, it is important to develop a versatile and simple experimental method to quantitatively investigate iRBCs cytoadhesion and binding kinetics. Here, we developed an advanced flow based adhesion assay to demonstrate that iRBC’s adhesion to endothelial CD36 receptor protein coated channels is a bistable process possessing a hysteresis loop. This finding confirms a recently developed model of cell adhesion which we used to fit our experimental data. We measured the contact area of iRBC under shear flow at different stages of infection using Total Internal Reflection Fluorescence (TIRF), and also adhesion receptor and ligand binding kinetics using Atomic Force Microscopy (AFM). With these parameters, we reproduced in our model the experimentally observed changes in adhesion properties of iRBCs accompanying parasite maturation and investigated the main mechanisms responsible for these changes, which are the contact area during the shear flow as well as the rupture area size.

Leukocyte rolling on P-selectin: a three-dimensional numerical study of the effect of cytoplasmic viscosity

Rolling leukocytes deform and show a large area of contact with endothelium under physiological flow conditions. We studied the effect of cytoplasmic viscosity on leukocyte rolling using our three-dimensional numerical algorithm that treats leukocyte as a compound droplet in which the core phase (nucleus) and the shell phase (cytoplasm) are viscoelastic fluids. The algorithm includes the mechanical properties of the cell cortex by cortical tension and considers leukocyte microvilli that deform viscoelastically and form viscous tethers at supercritical force. Stochastic binding kinetics describes binding of adhesion molecules. The leukocyte cytoplasmic viscosity plays a critical role in leukocyte rolling on an adhesive substrate. High-viscosity cells are characterized by high mean rolling velocities, increased temporal fluctuations in the instantaneous velocity, and a high probability for detachment from the substrate. A decrease in the rolling velocity, drag, and torque with the formation of a large, flat contact area in low-viscosity cells leads to a dramatic decrease in the bond force and stable rolling. Using values of viscosity consistent with step aspiration studies of human neutrophils (5-30 Pa·s), our computational model predicts the velocities and shape changes of rolling leukocytes as observed in vitro and in vivo.

Effects of different leukocyte subpopulations and flow conditions on leukocyte accumulation during reperfusion

BACKGROUND/AIMS

The study examined the interdependent effects of shear stress and different leukocyte subpopulations on endothelial cell activation and cell interactions during low flow and reperfusion.

METHODS

Human umbilical venous endothelial cells were perfused with either neutrophils or monocytes at different shear stress (2-0.25 dyn/cm(2)) and adhesion was quantified by microscopy. Effects of adherent neutrophils and monocytes on endothelial cell adhesion molecule expression were analyzed by flow cytometry after 4-hour static coincubation. After coincubation, the cocultures were reperfused with labeled neutrophils at 2 dyn/cm(2) and their adhesion was quantified selectively. For the control, endothelium monocultures with and without lipopolysaccharide activation were used.

RESULTS

At 2 dyn/cm(2), adhesion did not exceed baseline levels on nonactivated endothelium. Decreasing shear stress to 0.25 dyn/cm(2) largely increased the adhesion of both leukocyte subpopulations, similar to the effect of lipopolysaccharide at 2 dyn/cm(2). However, only adherent monocytes increased adhesion molecule expression, whereas neutrophils had no effect. As a functional consequence, adherent monocytes largely increased neutrophil adhesion during reperfusion, whereas adherent neutrophils did not.

CONCLUSION

Compromised shear stress is an autonomous trigger of leukocyte adhesion even in the absence of additional activators. Exceeding this immediate effect, adherent monocytes induce further endothelial activation and enhance further neutrophil adhesion during reperfusion.

Study of local hydrodynamic environment in cell-substrate adhesion using side-view μPIV technology

Tumor cell adhesion to the endothelium under shear flow conditions is a critical step that results in circulation-mediated tumor metastasis. This study presents experimental and computational techniques for studying the local hydrodynamic environment around adherent cells and how local shear conditions affect cell-cell interactions on the endothelium in tumor cell adhesion. To study the local hydrodynamic profile around heterotypic adherent cells, a side-view flow chamber assay coupled with micro particle imaging velocimetry (μPIV) technique was developed, where interactions between leukocytes and tumor cells in the near-endothelial wall region and the local shear flow environment were characterized. Computational fluid dynamics (CFD) simulations were also used to obtain quantitative flow properties around those adherent cells. Results showed that cell dimension and relative cell-cell positions had strong influence on local shear rates. The velocity profile above leukocytes and tumor cells displayed very different patterns. Larger cell deformations led to less disturbance to the flow. Local shear rates above smaller cells were observed to be more affected by relative positions between two cells.

A semianalytical model to study the effect of cortical tension on cell rolling

Cell rolling on the vascular endothelium plays an important role in trafficking of leukocytes, stem cells, and cancer cells. We describe a semianalytical model of cell rolling that focuses on the microvillus as the unit of cell-substrate interaction and integrates microvillus mechanics, receptor clustering, force-dependent receptor-ligand kinetics, and cortical tension that enables incorporation of cell body deformation. Using parameters obtained from independent experiments, the model showed excellent agreement with experimental studies of neutrophil rolling on P-selectin and predicted different regimes of cell rolling, including spreading of the cells on the substrate under high shear. The cortical tension affected the cell-surface contact area and influenced the rolling velocity, and modulated the dependence of rolling velocity on microvillus stiffness. Moreover, at the same shear stress, microvilli of cells with higher cortical tension carried a greater load compared to those with lower cortical tension. We also used the model to obtain a scaling dependence of the contact radius and cell rolling velocity under different conditions of shear stress, cortical tension, and ligand density. This model advances theoretical understanding of cell rolling by incorporating cortical tension and microvillus extension into a versatile, semianalytical framework.

Shear-stabilized rolling behavior of E. coli examined with simulations

Escherichia coli exhibit both shear-stabilized rolling and a transition to stationary adhesion while adhering in fluid flow. Understanding the mechanism by which this shear-enhanced adhesion occurs is an important step in understanding bacterial pathogenesis. In this work, simulations are used to investigate the relative contributions of fimbrial deformation and bond transitions to the rolling and stationary adhesion of E. coli. Each E. coli body is surrounded by many long, thin fimbriae terminating in a single FimH receptor that is capable of forming a catch bond with mannose. As simulated cells progress along a mannosylated surface under flow, the fimbriae bend and buckle as they interact with the surface, and FimH-mannose bonds form and break according to a two-state, allosteric catch-bond model. In simulations, shear-stabilized rolling resulted from an increase in the low-affinity bond number due to increased fimbrial deformation with shear. Catch-bond formation did not occur during cell rolling, but instead led to the transition to stationary adhesion. In contrast, in leukocyte and platelet systems, catch bonds appear to be involved in the stabilization of rolling, and integrin activation is required for stationary adhesion.

Effects of Membrane Rheology on Leuko-polymersome Adhesion to Inflammatory Ligands

A strategy for treating inflammatory disease is to create micro-particles with the adhesive properties of leukocytes. The underlying rheology of deformable adhesive microspheres would be an important factor in the adhesive performance of such particles. In this work the effect of particle deformability on the selectin-mediated rolling of polymer vesicles (polymersomes) is evaluated. The rheology of the polymersome membrane was modulated by cross-linking unsaturated side-chains within the hydrophobic core of the membrane. Increased membrane rigidity resulted in decreased rates of particle recruitment rather than decreased average rolling velocities. Reflective interference contrast microscopy of rolling vesicles confirmed that neither flaccid nor rigid vesicles sustained close contacts with the substrate during rolling adhesion. A variable-shear rate parallel-plate flow chamber was employed to evaluate individual vesicles rolling on substrates under different flow conditions. Analysis of the trajectories of single flaccid vesicles revealed several distinct populations of rolling vesicles; however, some of these populations disappear when the vesicle membranes are made rigid. This work shows that membrane mechanics affects the capture, but not the rolling dynamics, of adherent leuko-polymersomes.

Adhesion of bio-functionalized ultrasound microbubbles to endothelial cells by targeting to vascular cell adhesion molecule-1 under shear flow

The expression of certain endothelial cell adhesion molecules is increased during endothelial dysfunction or inflammatory activation. This has led to the concept of using microbubbles for targeted molecular imaging or drug delivery. In this approach, microbubbles with a specific ligand to receptors expressed at the site of specific diseases are constructed. The present study aimed to engineer a novel type of bio-functionalized microbubbles (vascular cell adhesion molecule 1 [VCAM-1]-targeted microbubbles), and determine whether VCAM-1-targeted microbubbles exhibit specific adhesion to lipopolysaccharide (LPS)-activated endothelial cells. Our data showed that VCAM-1 expression was significantly upregulated in both LPS-activated endothelial cells in vitro and endothelium in a rat atherosclerosis model in vivo. Targeted microbubbles were designed by conjugating anti-VCAM-1 monoclonal antibodies to the shell of microbubbles using biotin-avidin bridging chemistry methods. Microbubble adhesion to endothelial cells was assessed in a flow chamber at two shear stress conditions (6.3 and 10.4 dynes/cm²). Our data showed that microbubble adhesion depends on both the surface anti-VCAM-1 antibody densities and the exposed shear stresses. Adhesion of VCAM-1-targeted microbubbles onto LPS-activated endothelial cells increased with the surface antibody densities, and decreased with the exposed shear stresses. These findings showed that the specific ligand-carrying microbubbles have considerable potential in targeted ultrasound molecular imaging or ultrasound-assisted drug/gene delivery applications.

Rolling cell adhesion

Rolling adhesion on vascular surfaces is the first step in recruiting circulating leukocytes, hematopoietic progenitors, or platelets to specific organs or to sites of infection or injury. Rolling requires the rapid yet balanced formation and dissociation of adhesive bonds in the challenging environment of blood flow. This review explores how structurally distinct adhesion receptors interact through mechanically regulated kinetics with their ligands to meet these challenges. Remarkably, increasing force applied to adhesive bonds first prolongs their lifetimes (catch bonds) and then shortens their lifetimes (slip bonds). Catch bonds mediate the counterintuitive phenomenon of flow-enhanced rolling adhesion. Force-regulated disruptions of receptor interdomain or intradomain interactions remote from the ligand-binding surface generate catch bonds. Adhesion receptor dimerization, clustering in membrane domains, and interactions with the cytoskeleton modulate the forces applied to bonds. Both inside-out and outside-in cell signals regulate these processes.

Application of Population Dynamics to Study Heterotypic Cell Aggregations in the Near-Wall Region of a Shear Flow

Our research focused on the polymorphonuclear neutrophils (PMNs) tethering to the vascular endothelial cells (EC) and the subsequent melanoma cell emboli formation in a shear flow, an important process of tumor cell extravasation from the circulation during metastasis. We applied population balance model based on Smoluchowski coagulation equation to study the heterotypic aggregation between PMNs and melanoma cells in the near-wall region of an in vitro parallel-plate flow chamber, which simulates in vivo cell-substrate adhesion from the vasculatures by combining mathematical modeling and numerical simulations with experimental observations. To the best of our knowledge, a multiscale near-wall aggregation model was developed, for the first time, which incorporated the effects of both cell deformation and general ratios of heterotypic cells on the cell aggregation process. Quantitative agreement was found between numerical predictions and in vitro experiments. The effects of factors, including: intrinsic binding molecule properties, near-wall heterotypic cell concentrations, and cell deformations on the coagulation process, are discussed. Several parameter identification approaches are proposed and validated which, in turn, demonstrate the importance of the reaction coefficient and the critical bond number on the aggregation process.

Glycosyltransferase-programmed stereosubstitution (GPS) to create HCELL: engineering a roadmap for cell migration

During evolution of the vertebrate cardiovascular system, the vast endothelial surface area associated with branching vascular networks mandated the development of molecular processes to efficiently and specifically recruit circulating sentinel host defense cells and tissue repair cells at localized sites of inflammation/tissue injury. The forces engendered by high-velocity blood flow commensurately required the evolution of specialized cell surface molecules capable of mediating shear-resistant endothelial adhesive interactions, thus literally capturing relevant cells from the blood stream onto the target endothelial surface and permitting subsequent extravasation. The principal effectors of these shear-resistant binding interactions comprise a family of C-type lectins known as 'selectins' that bind discrete sialofucosylated glycans on their respective ligands. This review explains the 'intelligent design' of requisite reagents to convert native CD44 into the sialofucosylated glycoform known as hematopoietic cell E-/L-selectin ligand (HCELL), the most potent E-selectin counter-receptor expressed on human cells, and will describe how ex vivo glycan engineering of HCELL expression may open the 'avenues' for the efficient vascular delivery of cells for a variety of cell therapies.

Membrane cholesterol is a biomechanical regulator of neutrophil adhesion

OBJECTIVE

The purpose of this study was to evaluate the role of membrane cholesterol on human neutrophil and HL-60 biomechanics, capture, rolling, and arrest to P-selectin- or IL-1-activated endothelium.

METHODS AND RESULTS

Methyl-beta-cyclodextrin (MbetaCD) removed up to 73% and 45% of membrane cholesterol from HL-60 cells and neutrophils, whereas MbetaCD/cholesterol complexes resulted in maximum enrichment of 65% and 40%, respectively, above control levels. Cells were perfused at a venous wall shear rate of 100 s(-1) over adherent P-selectin-coated 1-microm diameter beads, uncoated 10-mum diameter beads, P-selectin-coated surfaces, or activated endothelium. Elevated cholesterol enhanced capture efficiency to 1-microm beads and increased membrane tether growth rate by 1.5- to 2-fold, whereas cholesterol depletion greatly reduced tether formation. Elevated cholesterol levels increased tether lifetime by 17% in neutrophils and adhesion lifetime by 63% in HL-60 cells. Deformation of cholesterol-enriched neutrophils increased the contact time with 10-mum beads by 32% and the contact area by 7-fold. On both P-selectin surfaces and endothelial-cell monolayers, cholesterol-enriched neutrophils rolled more slowly, more stably, and were more likely to firmly arrest. Cholesterol depletion resulted in opposite effects.

CONCLUSIONS

Increasing membrane cholesterol enhanced membrane tether formation and whole cell deformability, contributing to slower, more stable rolling on P-selectin and increased firm arrest on activated endothelium.

Micro-PTV measurement of the fluid shear stress acting on adherent leukocytes in vivo

Leukocyte adhesion is determined by the balance between molecular adhesive forces and convective dispersive forces. A key parameter influencing leukocyte adhesion is the shear stress acting on the leukocyte. This measure is indispensable for determining the molecular bond forces and estimating cell deformation. To experimentally determine this shear stress, we used microparticle tracking velocimetry analyzing more than 24,000 images of 0.5 microm fluorescent microbeads flowing within mildly inflamed postcapillary venules of the cremaster muscle in vivo. Green fluorescent protein, expressed under the lysozyme-M promoter, made leukocytes visible. After applying stringent quality criteria, 3 of 69 recordings were fully analyzed. We show that endothelial cells, but not leukocytes, are covered by a significant surface layer. The wall shear rate is nearly zero near the adherent arc of each leukocyte and reaches a maximum at the apex. This peak shear rate is 2-6-fold higher than the wall shear rate in the absence of a leukocyte. Microbead trajectories show a systematic deviation toward and away from the microvessel axis upstream and downstream from the leukocyte, respectively. The flow field around adherent leukocytes in vivo allows more accurate estimates of bond forces in rolling and adherent leukocytes and improved modeling studies.

Coupled Flow-Structure-Biochemistry Simulations of Dynamic Systems of Blood Cells Using an Adaptive Surface Tracking Method

A method for the computation of low Reynolds number dynamic blood cell systems is presented. The specific system of interest here is interaction between cancer cells and white blood cells in an experimental flow system. Fluid dynamics, structural mechanics, six-degree-of freedom motion control and surface biochemistry analysis components are coupled in the context of adaptive octree-based grid generation. Analytical and numerical verification of the quasi-steady assumption for the fluid mechanics is presented. The capabilities of the technique are demonstrated by presenting several three-dimensional cell system simulations, including the collision/interaction between a cancer cell and an endothelium adherent polymorphonuclear leukocyte (PMN) cell in a shear flow.

Biomechanics: cell research and applications for the next decade

With the recent revolution in Molecular Biology and the deciphering of the Human Genome, understanding of the building blocks that comprise living systems has advanced rapidly. We have yet to understand, however, how the physical forces that animate life affect the synthesis, folding, assembly, and function of these molecular building blocks. We are equally uncertain as to how these building blocks interact dynamically to create coupled regulatory networks from which integrative biological behaviors emerge. Here we review recent advances in the field of biomechanics at the cellular and molecular levels, and set forth challenges confronting the field. Living systems work and move as multi-molecular collectives, and in order to understand key aspects of health and disease we must first be able to explain how physical forces and mechanical structures contribute to the active material properties of living cells and tissues, as well as how these forces impact information processing and cellular decision making. Such insights will no doubt inform basic biology and rational engineering of effective new approaches to clinical therapy.

Leucocyte recruitment under fluid shear: mechanical and molecular regulation within the inflammatory synapse

1. Nature has evolved an exquisite system for regulation of leucocyte recruitment at sites of tissue inflammation. Mechanical energy translated to the red and white blood cells transports them from large arteries down to the microcirculation. 2. Neutrophils overcome the drag forces of blood flow by forming selectin and integrin adhesive bonds with the endothelium that coats the vessel wall. Leucocyte adhesion receptors have evolved unique mechanical and chemical properties that optimize for sequential binding and uptake of traction forces. 3. In the present brief review, we address how dispersive forces acting on a neutrophil in shear flow function to stabilize and synchronize bond formation within a macromolecular membrane complex we denote the inflammatory synapse.

Ethanol enhances neutrophil membrane tether growth and slows rolling on P-selectin but reduces capture from flow and firm arrest on IL-1-treated endothelium

The effects of ethanol at physiological concentrations on neutrophil membrane tether pulling, adhesion lifetime, rolling, and firm arrest behavior were studied in parallel-plate flow chamber assays with adherent 1-microm-diameter P-selectin-coated beads, P-selectin-coated surfaces, or IL-1-stimulated human endothelium. Ethanol (0.3% by volume) had no effect on P-selectin glycoprotein ligand-1 (PSGL-1), L-selectin, or CD11b levels but caused PSGL-1 redistribution. Also, ethanol prevented fMLP-induced CD11b up-regulation. During neutrophil collisions with P-selectin-coated beads at venous wall shear rates of 25-100 s(-1), ethanol increased membrane tether length and membrane growth rate by 2- to 3-fold but reduced the adhesion efficiency (detectable bonding per total collisions) by 2- to 3-fold, compared with untreated neutrophils. Without ethanol treatment, adhesion efficiency and adhesion lifetime declined as wall shear rate was increased, whereas ethanol caused the adhesion lifetime over all events to increase from 0.1 s to 0.5 s as wall shear rate was increased, an example of pharmacologically induced hydrodynamic thresholding. Consistent with this increased membrane fluidity and reduced capture, ethanol reduced rolling velocity by 37% and rolling flux by 55% on P-selectin surfaces at 100 s(-1), compared with untreated neutrophils. On IL-1-stimulated endothelium, rolling velocity was unchanged by ethanol treatment, but the fraction of cells converting to firm arrest was reduced from 35% to 24% with ethanol. Overall, ethanol caused competing biophysical and biochemical effects that: 1) reduced capture due to PSGL-1 redistribution, 2) reduced rolling velocity due to increased membrane tether growth, and 3) reduced conversion to firm arrest.

Membrane mobility of beta2 integrins and rolling associated adhesion molecules in resting neutrophils

The mobilities of transmembrane adhesion proteins are key underlying physical factors that contribute to neutrophil adhesion and arrest during inflammation. Here we present a novel (to our knowledge) fluorescence recovery after photobleaching system and a complementary analytical model to measure the mobility of the four key receptors involved in the adhesion cascade: L-selectin, PSGL-1, Mac-1, and LFA-1 for resting, spherical, and human neutrophils. In general, we find that beta(2) integrins (Mac-1, LFA-1) have mobilities 3-7 times faster than rolling associated molecules (L-selectin; PSGL-1), but that the mobilities within each of these groups are indistinguishable. Increasing temperature (room temperature versus 37 degrees C) results in increased mobility, in all cases, and the use of a bivalent antibody label (mAb versus Fab) decreases mobility, except in the case of rolling associated molecules at room temperature. Disrupting the actin cytoskeleton increased mobility except that the highest mobilities measured for integrins (D = 1.2 x 10(-9) cm(2)/s; 37 degrees C, Fab) are not affected by actin poisons and approach the expected value for free diffusion. Although evidence of cytoskeletal hindrance of integrin mobility has been found in other systems, our data suggest such hindrance does not limit bulk integrin diffusion in resting neutrophils over distances and times important for adhesive plaque formation.

Modeling neutrophil transport in pulmonary capillaries

Neutrophils can be retained in the pulmonary microvasculature due to their low deformability, resulting in having a higher concentration there than in the systemic circulation, even in normal lungs. It is thought that this high concentration of the cells facilitates their effective recruitment to sites of inflammation. Thus, in order to understand their role in the immune system in the lungs, where blood comes in contact with outer air via thin septa of alveoli, it is important to clarify their flow characteristics in the pulmonary capillary bed. However, in contrast to erythrocytes in systemic capillaries, little research has been performed on the flow of neutrophils in pulmonary capillaries. This may be partly because no complete rheological model of the cell has been established yet, and partly because pulmonary capillaries are very short and closely interconnected, forming a complicated three-dimensional network, in addition to difficulty in in vivo experimental observations. Moreover, the neutrophils change their mechanical properties and show active motion in response to some chemoattractants. In this article, various proposed rheological models of the neutrophil, flow models of a cell through a single capillary segment, and alveolar capillary network models are introduced, aiming at the numerical simulation of neutrophil transport in the pulmonary microvasculature.

3D computational modeling and simulation of leukocyte rolling adhesion and deformation

A 3D computational fluid dynamic (CFD) model is presented to simulate transient rolling adhesion and deformation of leukocytes over a P-selectin coated surface in shear flow. The computational model is based on immersed boundary method for cell deformation, and stochastic Monte Carlo simulation for receptor/ligand interaction. The model is shown to predict the characteristic 'stop-and-go' motion of rolling leukocytes. Here we examine the effect of cell deformation, shear rate, and microvilli distribution on the rolling characteristics. Comparison with experimental measurements is presented throughout the article. We observe that compliant cells roll more stably, and have longer pause times due to reduced bond force and increased bond lifetime. Microvilli presentation is shown to affect rolling characteristics by altering the step size, but not pause times. Our simulations predict a significant sideway motion of the cell arising purely due to receptor/ligand interaction, and discrete nature of microvilli distribution. Adhesion is seen to occur via multiple tethers, each of which forms multiple selectin bonds, but often one tether is sufficient to support rolling. The adhesion force is concentrated in only 1-3 tethered microvilli in the rear-most part of a cell. We also observe that the number of selectin bonds that hold the cell effectively against hydrodynamic shear is significantly less than the total adhesion bonds formed between a cell and the substrate. The force loading on individual microvillus and selectin bond is not continuous, rather occurs in steps. Further, we find that the peak force on a tethered microvillus is much higher than that measured to cause tether extrusion.

Adhesive dynamics simulation of neutrophil arrest with stochastic activation

The transition from rolling to firm adhesion is a key step in the adhesion cascade that permits a neutrophil to exit the bloodstream and make its way to a site of inflammation. In this work, we construct an integrated model of neutrophil activation and arrest that combines a biomechanical model of neutrophil adhesion and adhesive dynamics, with fully stochastic signal transduction modeling, in the form of kinetic Monte Carlo simulation within the microvilli. We employ molecular binding parameters gleaned from the literature and from simulation of cell-free rolling mediated by selectin molecules. We create a simplified model of lymphocyte function-associated antigen-1 activation that links P-selectin glycoprotein ligand-1 ligation to integrin activation. The model utilizes an energy profile of various integrin activation states drawn from literature data and permits manipulation of signal diffusivity within the microvillus. Our integrated model recreates neutrophil arrest within physiological timescales, and we demonstrate that increasing signal diffusivity within a microvillus accelerates arrest. If the energy barrier between free unactivated and free activated lymphocyte function-associated antigen-1 increases, the period of rolling before arrest increases. We further demonstrate that, within our model, modification of endothelial ligand surface densities can control arrest. In addition, the relative concentrations of signaling molecules control the fractional activation of the overall signaling pathway and the rolling time to arrest. This work presents the first, to our knowledge, fully stochastic model of neutrophil activation, which, though simplified, can recapitulate significant physiological details of neutrophil arrest yet retains the capacity to incorporate additional information regarding mechanisms of neutrophil signal transduction as they are elucidated.

The application of microbubbles for targeted drug delivery

Interest in microbubbles as vehicles for drug delivery has grown in recent years, due in part to characteristics that make them well suited for this role and in part to the need the for localized delivery of drugs in a number of applications. Microbubbles are inherently small, allowing transvascular passage, they can be functionalized for targeted adhesion, and can be acoustically driven, which facilitates ultrasound detection, production of bioeffects and controlled release of the cargo. This article provides an overview of related microbubble biofluid mechanics and reviews recent developments in the application of microbubbles for targeted drug delivery. Additionally, related advances in non-bubble microparticles for drug delivery are briefly described in the context of targeted adhesion.

Interplay between shear stress and adhesion on neutrophil locomotion

Leukocyte locomotion over the lumen of inflamed endothelial cells is a critical step, following firm adhesion, in the inflammatory response. Once firmly adherent, the cell will spread and will either undergo diapedesis through individual vascular endothelial cells or will migrate to tight junctions before extravasating to the site of injury or infection. Little is known about the mechanisms of neutrophil spreading or locomotion, or how motility is affected by the physical environment. We performed a systematic study to investigate the effect of the type of adhesive ligand and shear stress on neutrophil motility by employing a parallel-plate flow chamber with reconstituted protein surfaces of E-selectin, E-selectin/PECAM-1, and E-selectin/ICAM-1. We find that the level and type of adhesive ligand and the shear rate are intertwined in affecting several metrics of migration, such as the migration velocity, random motility, index of migration, and the percentage of cells moving in the direction of flow. On surfaces with high levels of PECAM-1, there is a near doubling in random motility at a shear rate of 180 s(-1) compared to the motility in the absence of flow. On surfaces with ICAM-1, neutrophil random motility exhibits a weaker response to shear rate, decreasing slightly when shear rate is increased from static conditions to 180 s(-1), and is only slightly higher at 1000 s(-1) than in the absence of flow. The random motility increases with increasing surface concentrations of E-selectin and PECAM-1 under static and flow conditions. Our findings illustrate that the endothelium may regulate neutrophil migration in postcapillary venules through the presentation of various adhesion ligands at sites of inflammation.

Analysis of inflammation

In the past, inflammation has been associated with infections and with the immune system. But more recent evidence suggests that a much broader range of diseases have telltale markers for inflammation. Inflammation is the basic mechanism available for repair of tissue after an injury and consists of a cascade of cellular and microvascular reactions that serve to remove damaged and generate new tissue. The cascade includes elevated permeability in microvessels, attachment of circulating cells to the vessels in the vicinity of the injury site, migration of several cell types, cell apoptosis, and growth of new tissue and blood vessels. This review provides a summary of the major microvascular, cellular, and molecular mechanisms that regulate elements of the inflammatory cascade. The analysis is largely focused on the identification of the major participants, notably signaling and adhesion molecules, and their mode of action in the inflammatory cascade. We present a new hypothesis for the generation of inflammatory mediators in plasma that are derived from the digestive pancreatic enzymes responsible for digestion. The inflammatory cascade offers a large number of opportunities for development of quantitative models that describe various aspects of human diseases.

Adhesive dynamics simulation of neutrophil arrest with deterministic activation

The transition from rolling to firm adhesion is a key element of neutrophil activation and essential to the inflammatory response. Although the molecular mediators of rolling and firm adhesion are known to be selectins and beta2 -integrins, respectively, the precise dynamic mechanism by which these ligands facilitate neutrophil arrest remains unknown. Recently, it has been shown that ligation of E-selectin can stimulate the firm adhesion of neutrophils via a MAP-kinase cascade. To study the possible mechanism by which neutrophil arrest could occur, we created an integrated model by combining two methodologies from computational biology: a mechanics-based modeling of leukocyte adhesion (adhesive dynamics) and signal transduction pathway modeling. Within adhesive dynamics, a computational method our group has shown to accurately recreate rolling dynamics, we include a generic, tunable integrin activation module that links selectin engagement to integrin and activity. This model allows us to relate properties of the activation function to the dynamics of rolling and the time and distance rolled before arrest. This integrated model allows us to understand how intracellular signaling activity can set the timescale of neutrophil activation, adhesion, and diapedesis.

Design of a side-view particle imaging velocimetry flow system for cell-substrate adhesion studies

Experimental models that mimic the flow conditions in microcapillaries have suggested that the local shear stresses and shear rates can mediate tumor cell and leukocyte arrest on the endothelium and subsequent sustained adhesion. However, further investigation has been limited by the lack of experimental models that allow quantitative measurement of the hydrodynamic environment over adherent cells. The purpose of this study was to develop a system capable of acquiring quantitative flow profiles over adherent cells. By combining the techniques of side-view imaging and particle image velocimetry (PIV), an in vitro model was constructed that is capable of obtaining quantitative flow data over cells adhering to the endothelium. The velocity over an adherent leukocyte was measured and the shear rate was calculated under low and high upstream wall shear. The microcapillary channel was modeled using computational fluid dynamics (CFD) and the calculated velocity profiles over cells under the low and high shear rates were compared to experimental results. The drag force applied to each cell by the fluid was then computed. This system provides a means for future study of the forces underlying adhesion by permitting characterization of the local hydrodynamic conditions over adherent cells.

Computational modeling of multicellular constructs with the material point method

Computational modeling of the mechanics of cells and multicellular constructs with standard numerical discretization techniques such as the finite element (FE) method is complicated by the complex geometry, material properties and boundary conditions that are associated with such systems. The objectives of this research were to apply the material point method (MPM), a meshless method, to the modeling of vascularized constructs by adapting the algorithm to accurately handle quasi-static, large deformation mechanics, and to apply the modified MPM algorithm to large-scale simulations using a discretization that was obtained directly from volumetric confocal image data. The standard implicit time integration algorithm for MPM was modified to allow the background computational grid to remain fixed with respect to the spatial distribution of material points during the analysis. This algorithm was used to simulate the 3D mechanics of a vascularized scaffold under tension, consisting of growing microvascular fragments embedded in a collagen gel, by discretizing the construct with over 13.6 million material points. Baseline 3D simulations demonstrated that the modified MPM algorithm was both more accurate and more robust than the standard MPM algorithm. Scaling studies demonstrated the ability of the parallel code to scale to 200 processors. Optimal discretization was established for the simulations of the mechanics of vascularized scaffolds by examining stress distributions and reaction forces. Sensitivity studies demonstrated that the reaction force during simulated extension was highly sensitive to the modulus of the microvessels, despite the fact that they comprised only 10.4% of the volume of the total sample. In contrast, the reaction force was relatively insensitive to the effective Poisson's ratio of the entire sample. These results suggest that the MPM simulations could form the basis for estimating the modulus of the embedded microvessels through a parameter estimation scheme. Because of the generality and robustness of the modified MPM algorithm, the relative ease of generating spatial discretizations from volumetric image data, and the ability of the parallel computational implementation to scale to large processor counts, it is anticipated that this modeling approach may be extended to many other applications, including the analysis of other multicellular constructs and investigations of cell mechanics.

Effect of microvillus deformability on leukocyte adhesion explored using adhesive dynamics simulations

Leukocyte rolling on the endothelium via selectin molecules is an important step in the adhesion cascade, which allows leukocytes in the bloodstream to reach sites of infection. We improve upon Adhesive Dynamics simulations by incorporating deformable microvilli on which adhesion molecules are clustered. As determined in micropipette experiments, microvilli deform like an elastic spring at small forces and a combination of yield and viscous dissipation at high forces. First, we create a modified version of the state diagram for adhesion which includes microvillus deformation, and find four adhesion states-firmly bound; landing; rolling; and no-adhesion. Then, we simulate the effects of receptor clustering on the tips of microvilli, number of adhesion molecules on the cell, and the spring constant of the bonds, within the context of deformable microvilli. We also explore how the microvillus rheology itself controls the dynamics of adhesion. A minimum in rolling velocity occurs at an intermediate value of the microvillus membrane viscosity, remarkably close to the reported physiological value, suggesting that the mechanics of microvilli have evolved ideally for rolling and adhesion of leukocytes. We find that a larger degree of association between the membrane and cytoskeleton leads to slower rolling, and stiffer microvilli result in faster rolling. Decreasing the overall deformability of the microvilli greatly reduces a simulated cell's ability to roll. A comparison to experimental results of in vitro cell rolling agrees with the simulation at low shear rates. Furthermore, simulated rolling trajectories of cells with deformable microvilli display periods of rolling interdispersed with pauses, consistent with that seen in experiments where microvilli were observed to stretch.

Neutrophil string formation: hydrodynamic thresholding and cellular deformation during cell collisions

Neutrophils unexpectedly display flow-enhanced adhesion (hydrodynamic thresholding) to L-selectin in rolling or aggregation assays. We report that the primary collision efficiency (epsilon) of flowing neutrophils with preadhered neutrophils on intercellular adhesion molecule-1 (ICAM-1) or fibrinogen also displayed a maximum of epsilon approximately 0.4-0.45 at a wall shear rate of 100 s(-1), an example of thresholding. Primary collision lifetime with no detectable bonding decreased from 130 to 10 ms as wall shear rate increased from 30 to 300 s(-1), whereas collision lifetimes with bonding decreased from 300 to 100 ms over this shear range using preadhered neutrophils on ICAM-1, with similar results for fibrinogen. Antibodies against L-selectin, but not against CD11a, CD11b, or CD18, reduced epsilon at 100 s(-1) by >85%. High resolution imaging detected large scale deformation of the flowing neutrophil during the collision at 100 s(-1) with the apparent contact area increasing up to approximately 40 microm(2). We observed the formation of long linear string assemblies of neutrophils downstream of neutrophils preadhered to ICAM-1, but not fibrinogen, with a maximum in string formation at 100 s(-1). Secondary capture events to the ICAM-1 or fibrinogen coated surfaces after primary collisions were infrequent and short lived, typically lasting from 500 to 3500 ms. Between 5 and 20% of neutrophil interactions with ICAM-1 substrate converted to firm arrest (>3500 ms) and greatly exceeded that observed for fibrinogen, thus defining the root cause of poor string formation on fibrinogen at all shear rates. Additionally, neutrophils mobilized calcium after incorporation into strings. Static adhesion also caused calcium mobilization, as did the subsequent onset of flow. To our knowledge, this is the first report of 1). hydrodynamic thresholding in neutrophil string formation; 2). string formation on ICAM-1 but not on fibrinogen; 3). large cellular deformation due to collisions at a venous shear rate; and 4), mechanosensing through neutrophil beta(2)-integrin/adhesion. The increased contact area during deformation was likely responsible for the hydrodynamic threshold observed in the primary collision efficiency since no increase in primary collision lifetime was detected as shear forces were increased (for either surface coating).

Catch bonds govern adhesion through L-selectin at threshold shear

Flow-enhanced cell adhesion is an unexplained phenomenon that might result from a transport-dependent increase in on-rates or a force-dependent decrease in off-rates of adhesive bonds. L-selectin requires a threshold shear to support leukocyte rolling on P-selectin glycoprotein ligand-1 (PSGL-1) and other vascular ligands. Low forces decrease L-selectin–PSGL-1 off-rates (catch bonds), whereas higher forces increase off-rates (slip bonds). We determined that a force-dependent decrease in off-rates dictated flow-enhanced rolling of L-selectin–bearing microspheres or neutrophils on PSGL-1. Catch bonds enabled increasing force to convert short-lived tethers into longer-lived tethers, which decreased rolling velocities and increased the regularity of rolling steps as shear rose from the threshold to an optimal value. As shear increased above the optimum, transitions to slip bonds shortened tether lifetimes, which increased rolling velocities and decreased rolling regularity. Thus, force-dependent alterations of bond lifetimes govern L-selectin–dependent cell adhesion below and above the shear optimum. These findings establish the first biological function for catch bonds as a mechanism for flow-enhanced cell adhesion.