Role of Mitral Annulus Diastolic Geometry on Intraventricular Filling Dynamics

Analysis of Energy and Pressure in the Sinus with Different Blood Pressures after Bioprosthetic Aortic Valve Replacement

PURPOSE

To investigate the effect of changing systolic and diastolic blood pressures (SBP and DBP, respectively) on sinus flow and valvular and epicardial coronary flow dynamics after TAVR and SAVR.

METHODS

SAPIEN 3 and Magna valves were deployed in an idealized aortic root model as part of a pulse duplicating left heart flow loop simulator. Different combinations of SBP and DBP were applied to the test setup and the resulting change in total coronary flow from baseline (120/60 mmHg), effective orifice area (EOA), and left ventricular (LV) workload, with each combination, was assessed. In addition, particle image velocimetry was used to assess the Laplacian of pressure (∇ 2 P ) in the sinus, coronary and main flow velocities, the energy dissipation rate (EDR) in the sinus and the LV workload.

RESULTS

This study shows that under an elevated SBP, there is an increase in the total coronary flow, EOA, LV workload, peak velocities downstream of the valve,∇ 2 P , and EDR. With an elevated DBP, there was an increase in the total coronary flow and∇ 2 P . However, EOA and LV workload decreased with an increase in DBP, and EDR increased with a decrease in DBP.

CONCLUSIONS

Blood pressure alters the hemodynamics in the sinus and downstream flow following aortic valve replacement, potentially influencing outcomes in some patients.

Large Animal Translational Validation of 3 Mitral Valve Repair Operations for Mitral Regurgitation Using a Mitral Valve Prolapse Model: A Comprehensive In Vivo Biomechanical Engineering Analysis

BACKGROUND

Various mitral repair techniques have been described. Though these repair techniques can be highly effective when performed correctly in suitable patients, limited quantitative biomechanical data are available. Validation and thorough biomechanical evaluation of these repair techniques from translational large animal in vivo studies in a standardized, translatable fashion are lacking. We sought to evaluate and validate biomechanical differences among different mitral repair techniques and further optimize repair operations using a large animal mitral valve prolapse model.

METHODS

Male Dorset sheep (n=20) had P2 chordae severed to create the mitral valve prolapse model. Fiber Bragg grating force sensors were implanted to measure chordal forces. Ten sheep underwent 3 randomized, paired mitral valve repair operations: neochord repair, nonresectional leaflet remodeling, and triangular resection. The other 10 sheep underwent neochord repair with 2, 4, and 6 neochordae. Data were collected at baseline, mitral valve prolapse, and after each repair.

RESULTS

All mitral repair techniques successfully eliminated regurgitation. Compared with mitral valve prolapse (0.54±0.18 N), repair using neochord (0.37±0.20 N; P=0.02) and remodeling techniques (0.30±0.15 N; P=0.001) reduced secondary chordae peak force. Neochord repair further decreased primary chordae peak force (0.21±0.14 N) to baseline levels (0.20±0.17 N; P=0.83), and was associated with lower primary chordae peak force compared with the remodeling (0.34±0.18 N; P=0.02) and triangular resectional techniques (0.36±0.27 N; P=0.03). Specifically, repair using 2 neochordae resulted in higher peak primary chordal forces (0.28±0.21 N) compared with those using 4 (0.22±0.16 N; P=0.02) or 6 neochordae (0.19±0.16 N; P=0.002). No difference in peak primary chordal forces was observed between 4 and 6 neochordae (P=0.05). Peak forces on the neochordae were the lowest using 6 neochordae (0.09±0.11 N) compared with those of 4 neochordae (0.15±0.14 N; P=0.01) and 2 neochordae (0.29±0.18 N; P=0.001).

CONCLUSIONS

Significant biomechanical differences were observed underlying different mitral repair techniques in a translational large animal model. Neochord repair was associated with the lowest primary chordae peak force compared to the remodeling and triangular resectional techniques. Additionally, neochord repair using at least 4 neochordae was associated with lower chordal forces on the primary chordae and the neochordae. This study provided key insights about mitral valve repair optimization and may further improve repair durability.

Echocardiographic quantification of mitral apparatus morphology and dynamics in patients with dilated cardiomyopathy

Mitral regurgitation is among the most common valvular heart diseases. Mitral regurgitation in patients with dilated cardiomyopathy is a complex pathology involving annular dilatation, papillary muscle displacement, systolic leaflet tethering, and left ventricular remodeling. Quantification of mitral apparatus damage in these patients is essential for successful interventional and surgical therapy. Mitral regurgitation in the presence of dilated cardiomyopathy is classified as Carpentier type IIIB, with restricted leaflet mobility as a standard feature. Echocardiography allows accurate evaluation of the complex anatomy and function of the mitral apparatus. Updated guidelines recommend two-dimensional followed by systematic three-dimensional echocardiographic evaluation in patients with mitral regurgitation. New three-dimensional echocardiographic software packages provide many parameters that help identify the precise morphology and function of the various components of the mitral apparatus, helping to determine the etiology of mitral regurgitation and evaluate disease severity. This review provides the first point-by-point approach to the assessment of all old and new echocardiographic methods, from the simplest to the most complex, used to examine the components of the mitral valve apparatus in patients with dilated cardiomyopathy. Although these parameters are still under research, this information will be helpful for establishing therapeutic procedures in a disease with a poor prognosis.

Role of Vector Flow Mapping in Evaluating Left Ventricular Diastolic Flow Dynamics in Patients Who Underwent Mitral Valve Repair for Degenerative Mitral Regurgitation

Background

Mitral valve (MV) morphology after MV repair affects postoperative left ventricular (LV) blood flow pattern and long-term cardiac function. Pilot data suggest that LV diastolic vortex flow pattern changes after operation, but specific quantifiers remain unknown. We aimed to explore the role of vector flow mapping (VFM) in LV diastolic vortex flow pattern in patients who underwent MV repair.

Methods

A total of 70 patients with degenerative mitral regurgitation were consecutively enrolled and 30 age- and gender-matched controls were recruited. 50 Patients who underwent MV repair were eventually included in our study. LV average energy loss (EL-AVE) during diastole was measured in the MV repair group by VFM one week before and one month after the operation, and compared with that of controls using one-way analysis of variance. The effect of surgical techniques and the extension of leaflet degeneration on postoperative EL-AVE were analyzed using muti-way analysis of variance, and patients were categorized into a resection subgroup (n = 29) and a non-resection subgroup (n = 21).

Results

The EL-AVE one month after operation in the MV repair group was decreased (p < 0.001) compared to that one week before the operation, and was increased (p < 0.001) compared to that in controls. Mitral leaflet resection had a statistically significant effect on postoperative EL-AVE. The EL-AVE of the resection subgroup was higher than that of non-resection subgroup (p < 0.001).

Conclusions

VFM can be used to evaluate the diastolic blood flow pattern of LV after MV repair, and to observe the changes of LV blood flow pattern caused by different surgical techniques. VFM may be a potential new hemodynamic evaluation method after MV repair.

Heart Valve Biomechanics: The Frontiers of Modeling Modalities and the Expansive Capabilities of Ex Vivo Heart Simulation

The field of heart valve biomechanics is a rapidly expanding, highly clinically relevant area of research. While most valvular pathologies are rooted in biomechanical changes, the technologies for studying these pathologies and identifying treatments have largely been limited. Nonetheless, significant advancements are underway to better understand the biomechanics of heart valves, pathologies, and interventional therapeutics, and these advancements have largely been driven by crucial in silico, ex vivo, and in vivo modeling technologies. These modalities represent cutting-edge abilities for generating novel insights regarding native, disease, and repair physiologies, and each has unique advantages and limitations for advancing study in this field. In particular, novel ex vivo modeling technologies represent an especially promising class of translatable research that leverages the advantages from both in silico and in vivo modeling to provide deep quantitative and qualitative insights on valvular biomechanics. The frontiers of this work are being discovered by innovative research groups that have used creative, interdisciplinary approaches toward recapitulating in vivo physiology, changing the landscape of clinical understanding and practice for cardiovascular surgery and medicine.

Atrial and ventricular flows across a transcatheter mitral valve

 

OBJECTIVES

The objective of this study was to evaluate the haemodynamic performance of transcatheter mitral valve replacement (TMVR) Implant with a focus on turbulence and washout adjacent to the ventricular surface of the leaflets. TMVR holds the promise of treating a large spectrum of mitral valve diseases. However, the haemodynamic performance and flow dynamics of such replacements are not fully understood.

METHODS

A tri-leaflet biopsrosthetic TMVR represented by Caisson implant of size 36A was implanted in the mitral position of a left heart simulator pulse duplicating system under physiological conditions. The 36A implant covers an anterior-posterior range of 26-32 mm and a commissure-to-commissure range of 30-36 mm. Transmitral pressure gradient, effective orifice area and regurgitant fraction were calculated. Particle image velocimetry was performed to evaluate turbulence in 2 perpendicular planes (Reynolds and viscous shear stresses, respectively). Additionally, dye experiments were performed to visualize washout.

RESULTS

Transmitral pressure gradient was 1.29 ± 0.27 mmHg and effective orifice area was 2.96 ± 0.28 cm2. Regurgitant fraction was 14.13 ± 0.08%. Total washout was 4.27 cardiac cycles. Largest viscous shear stress reaches 3.7 Pa and 2.4 Pa in ventricle and atrium, respectively. Reynolds shear stress in the atrial side was <10 Pa. In the ventricular side, the largest Reynolds shear stress reached ∼35 Pa.

CONCLUSIONS

TMVR leads to favourable haemodynamics with low degree of turbulence combined with fast washout around the leaflets indicating promising potential for freedom from blood damage potential and thrombosis corroborated by initial clinical studies as part of the valves's Early Feasibility Study.

Diastolic Vortex Alterations With Reducing Left Ventricular Volume: An In Vitro Study

Despite the large number of studies of intraventricular filling dynamics for potential clinical applications, little is known as to how the diastolic vortex ring properties are altered with reduction in internal volume of the cardiac left ventricle (LV). The latter is of particular importance in LV diastolic dysfunction (LVDD) and in congenital diseases such as hypertrophic cardiomyopathy (HCM), where LV hypertrophy (LVH) can reduce LV internal volume. We hypothesized that peak circulation and the rate of decay of circulation of the diastolic vortex would be altered with reducing end diastolic volume (EDV) due to increasing confinement. We tested this hypothesis on physical models of normal LV and HCM geometries, under identical prescribed inflow profiles and for multiple EDVs, using time-resolved particle image velocimetry (TR-PIV) measurements on a left heart simulator. Formation and pinch-off of the vortex ring were nearly unaffected with changes to geometry and EDV. Pinch-off occurred before the end of early filling (E-wave) in all test conditions. Peak circulation of the vortex core near the LV outflow tract (LVOT) increased with lowering EDV and was lowest for the HCM model. The rate of decay of normalized circulation in dimensionless formation time (T*) increased with decreasing EDV. When using a modified version of T* that included average LV cross-sectional area and EDV, normalized circulation of all tested EDVs collapsed closely in the normal LV model (10% maximum difference between EDVs). Collectively, our results show that LV shape and internal volume play a critical role in diastolic vortex ring dynamics.

Anatomy of Mitral Valve Complex as Revealed by Non-Invasive Imaging: Pathological, Surgical and Interventional Implications

Knowledge of mitral valve (MV) anatomy has been accrued from anatomic specimens derived by cadavers, or from direct inspection during open heart surgery. However, today two-dimensional and three-dimensional transthoracic (2D/3D TTE) and transesophageal echocardiography (2D/3D TEE), computed tomography (CT) and cardiac magnetic resonance (CMR) provide images of the beating heart of unprecedented quality in both two and three-dimensional format. Indeed, over the last few years these non-invasive imaging techniques have been used for describing dynamic cardiac anatomy. Differently from the “dead” anatomy of anatomic specimens and the “static” anatomy observed during surgery, they have the unique ability of showing “dynamic” images from beating hearts. The “dynamic” anatomy gives us a better awareness, as any single anatomic arrangement corresponds perfectly to a specific function. Understanding normal anatomical aspects of MV apparatus is of a paramount importance for a correct interpretation of the wide spectrum of patho-morphological MV diseases. This review illustrates the anatomy of MV as revealed by non-invasive imaging describing physiological, pathological, surgical and interventional implications related to specific anatomical features of the MV complex.

On the Significance of Systolic Flow Waveform on Aortic Valve Energy Loss

This study aims to quantitatively and qualitatively assess energy dissipation in the aortic valve as a function of systolic aortic flow waveform representing pathologies where flow time-to-peak is delayed. A bioprosthetic valve was tested in the aortic position of a left-heart simulator under physiological pressure and flow conditions. The flow loop piston pump was programmed to generate three different flow waveforms each with a different peak time annotated as early peak (EP) with a rapid acceleration, mid peak (MP) and late peak (LP) with a rapid deceleration. Energy dissipation was calculated from flow and pressure measurements while sinus vorticity dynamics were evaluated using time-resolved planar particle image velocimetry. Average pressure gradients during systole are found 30.2 ± 0.19, 30.7 ± 0.25 and 32.9 ± 0.29 mmHg and average dissipation over systole is found 0.95 ± 0.026, 1.05 ± 0.034 and 1.25 ± 0.043 W for EP, MP and LP respectively. As systole's acceleration phase is slower, sinus vortices are more likely to form, necessitating more energy exchange from shear layers inducing more viscous dissipation. EP found in healthy individuals is superior in terms of reducing energy dissipation and increasing aortic valve efficiency. In the context of possible left ventricular dysfunction and aortic stenosis, this means that delayed time-to-peak in the aortic flow waveform seen is not compensatory.

Aortic Regurgitation Generates a Kinematic Obstruction Which Hinders Left Ventricular Filling

An incompetent aortic valve (AV) results in aortic regurgitation (AR), where retrograde flow of blood into the left ventricle (LV) is observed. In this work, we parametrically characterized the detailed changes in intra-ventricular flow during diastole as a result of AR in a physiological in vitro left-heart simulator (LHS). The loss of energy within the LV as the level of AR increased was also assessed. The validated LHS consisted of an optically-clear, flexible wall LV and a modular AV holder. Two-component, planar, digital particle image velocimetry was used to visualize and quantify intra-ventricular flow. A large coherent vortical structure which engulfed the whole LV was observed under control conditions. In the cases with AR, the regurgitant jet was observed to generate a "kinematic obstruction" between the mitral valve and the LV apex, preventing the trans-mitral jet from generating a coherent vortical structure. The regurgitant jet was also observed to impinge on the inferolateral wall of the LV. Energy dissipation rate (EDR) for no, trace, mild, and moderate AR were found to be 1.15, 2.26, 3.56, and 5.99 W/m³, respectively. This study has, for the first time, performed an in vitro characterization of intra-ventricular flow in the presence of AR. Mechanistically, the formation of a "kinematic obstruction" appears to be the cause of the increased EDR (a metric quantifiable in vivo) during AR. EDR increases non-linearly with AR fraction and could potentially be used as a metric to grade severity of AR and develop clinical interventional timing strategies for patients.

The hemodynamic effects of acute aortic regurgitation into a stiffened left ventricle resulting from chronic aortic stenosis

Acute aortic regurgitation (AR) post-chronic aortic stenosis is a prevalent phenomenon occurring in patients who undergo transcatheter aortic valve replacement (TAVR) surgery. The objective of this work was to characterize the effects of left ventricular diastolic stiffness (LVDS) and AR severity on LV performance. Three LVDS models were inserted into a physiological left heart simulator. AR severity was parametrically varied through four levels (ranging from trace to moderate) and compared with a competent aortic valve. Hemodynamic metrics such as average diastolic pressures (DP) and reduction in transmitral flow were measured. AR index was calculated as a function of AR severity and LVDS, and the work required to make up for lost volume due to AR was estimated. In the presence of trace AR, higher LVDS had up to a threefold reduction in transmitral flow (13% compared with 3.5%) and a significant increase in DP (2-fold). The AR index ranged from ∼42 to 16 (no AR to moderate AR), with stiffer LVs having lower values. To compensate for lost volume due to AR, the low, medium, and high LVDS models were found to require 5.1, 5.5, and 6.6 times more work, respectively. This work shows that the LVDS has a significant effect on the LV performance in the presence of AR. Therefore, the LVDS of potential TAVR patients should be assessed to gain an initial indication of their ability to tolerate post-procedural AR.