Flash lamp-excited time-resolved fluorescence microscope suppresses autofluorescence in water concentrates to deliver an 11-fold increase in signal-to-noise ratio

KRAS4b:RAF-1 Homogenous Time-Resolved Fluorescence Resonance Energy Transfer Assay for Drug Discovery

Homogenous time-resolved FRET (HTRF) assays have become one of the most popular tools for pharmaceutical drug screening efforts over the last two decades. Large Stokes shifts and long fluorescent lifetimes of lanthanide chelates lead to robust signal to noise, as well as decreased false positive rates compared to traditional assay techniques. In this chapter, we describe an HTRF protein-protein interaction (PPI) assay for the KRAS4b G-domain in the GppNHp-bound state and the RAF-1-RBD currently used for drug screens. Application of this assay contributes to the identification of lead compounds targeting the GTP-bound active state of K-RAS.

A Highly Sensitive Time-Gated Fluorescence Immunoassay Platform Using Mn-Doped AgZnInS/ZnS Nanocrystals as Signal Transducers

In this work, a time-gated immunoassay platform using low-energy excitable and fluorescence long-lived Mn:AgZnInS/ZnS nanocrystals as signal transducers was developed and applied to the detection of the capsular polysaccharide (CPS) of Burkholderia pseudomallei, a Gram-negative bacterium that is the causative agent of melioidosis. CPS is a high molecular weight antigen displayed and is shed from the outer membrane of B. pseudomallei. The immunoassay using the time-gated platform presents a limit of detection at around 23 pg/ml when CPS is spiked in human serum.

A compact time-gated instrument for QDs with low excitation energy and millisecond fluorescence lifetime as signal reporters, and its detection application

Recently, bright quantum dots (QDs) possessing low energy for excitation and long fluorescence lifetime in milliseconds have been reported. These QDs such as Mn doped I(II)-III-VI nanocrystals are promising for highly sensitive time-gated sensing applications with a portable or small benchtop “personal” instrument because their unique optical properties not only ensure a high signal-to-background ratio in time-gated fluorescence-intensity (TGFI) measurement but also significantly simplify the TGFI measurement instrument design criteria. In this work, following up the research progress on these QDs, we developed a compact TGFI measurement instrument with high sensitivity and cost-effectiveness for these QDs (more specifically Mn:AZIS/ZnS QDs) as signal reporters. We applied the instrument for sensitive detection of copper(ii) ions in highly autofluorescent rum (alcoholic beverage) in a fluorescence quenching assay utilizing these QDs for signal transduction. The results from this work suggest that this instrument together with bright QDs with low-energy for excitation and long fluorescence lifetimes should have potential to not only convert many regular (non-time-gated) QD-based fluorescence assays to time-gated assays for higher sensitivities or lower LODs, but also facilitate the development of highly sensitive assays for in-field or point-of-care testing.

Photostable and highly emissive glassy organic dots exhibiting thermally activated delayed fluorescence

TADF nanoparticles have been demonstrated as a bright probe for bio-imaging. These nanoparticles show a high PLQY, long lifetime emission and high photostability.

High-sensitivity detection of cardiac troponin I with UV LED excitation for use in point-of-care immunoassay

High-sensitivity cardiac troponin assay development enables determination of biological variation in healthy populations, more accurate interpretation of clinical results and points towards earlier diagnosis and rule-out of acute myocardial infarction. In this paper, we report on preliminary tests of an immunoassay analyzer employing an optimized LED excitation to measure on a standard troponin I and a novel research high-sensitivity troponin I assay. The limit of detection is improved by factor of 5 for standard troponin I and by factor of 3 for a research high-sensitivity troponin I assay, compared to the flash lamp excitation. The obtained limit of detection was 0.22 ng/L measured on plasma with the research high-sensitivity troponin I assay and 1.9 ng/L measured on tris-saline-azide buffer containing bovine serum albumin with the standard troponin I assay. We discuss the optimization of time-resolved detection of lanthanide fluorescence based on the time constants of the system and analyze the background and noise sources in a heterogeneous fluoroimmunoassay. We determine the limiting factors and their impact on the measurement performance. The suggested model can be generally applied to fluoroimmunoassays employing the dry-cup concept.

A low-cost smartphone-based platform for highly sensitive point-of-care testing with persistent luminescent phosphors

Through their computational power and connectivity, smartphones are poised to rapidly expand telemedicine and transform healthcare by enabling better personal health monitoring and rapid diagnostics. Recently, a variety of platforms have been developed to enable smartphone-based point-of-care testing using imaging-based readout with the smartphone camera as the detector. Fluorescent reporters have been shown to improve the sensitivity of assays over colorimetric labels, but fluorescence readout necessitates incorporating optical hardware into the detection system, adding to the cost and complexity of the device. Here we present a simple, low-cost smartphone-based detection platform for highly sensitive luminescence imaging readout of point-of-care tests run with persistent luminescent phosphors as reporters. The extremely bright and long-lived emission of persistent phosphors allows sensitive analyte detection with a smartphone by a facile time-gated imaging strategy. Phosphors are first briefly excited with the phone's camera flash, followed by switching off the flash, and subsequent imaging of phosphor luminescence with the camera. Using this approach, we demonstrate detection of human chorionic gonadotropin using a lateral flow assay and the smartphone platform with strontium aluminate nanoparticles as reporters, giving a detection limit of ≈45 pg mL-1 (1.2 pM) in buffer. Time-gated imaging on a smartphone can be readily adapted for sensitive and potentially quantitative testing using other point-of-care formats, and is workable with a variety of persistent luminescent materials.

340 nm pulsed UV LED system for europium-based time-resolved fluorescence detection of immunoassays

We report on the design, development and investigation of an optical system based on UV light emitting diode (LED) excitation at 340 nm for time-resolved fluorescence detection of immunoassays. The system was tested to measure cardiac marker Troponin I with a concentration of 200 ng/L in immunoassay. The signal-to-noise ratio was comparable to state-of-the-art Xenon flash lamp based unit with equal excitation energy and without overdriving the LED. We performed a comparative study of the flash lamp and the LED based system and discussed temporal, spatial, and spectral features of the LED excitation for time-resolved fluorimetry. Optimization of the suggested key parameters of the LED promises significant increase of the signal-to-noise ratio and hence of the sensitivity of immunoassay systems.

A Novel Universal Detection Agent for Time-Gated Luminescence Bioimaging

Luminescent lanthanide chelates have been used to label antibodies in time-gated luminescence (TGL) bioimaging. However, it is a challenging task to label directly an antibody with lanthanide-binding ligands and achieve control of the target ligand/protein ratios whilst ensuring that affinity and avidity of the antibody remain uncompromised. We report the development of a new indirect detection reagent to label antibodies with detectable luminescence that circumvents this problem by labelling available lysine residues in the linker portion of the recombinant fusion protein Linker-Protein G (LPG). Succinimide-activated lanthanide chelating ligands were attached to lysine residues in LPG and Protein G (without Linker) and the resulting Luminescence-Activating (LA-) conjugates were compared for total incorporation and conjugation efficiency. A higher and more efficient incorporation of ligands at three different molar ratios was observed for LPG and this effect was attributed to the presence of eight readily available lysine residues in the linker region of LPG. These Luminescence-Activating (LA-) complexes were subsequently shown to impart luminescence (upon formation of europium(III) complexes) to cell-specific antibodies within seconds and without the need for any complicated bioconjugation procedures. The potential of this technology was demonstrated by direct labelling of Giardia cysts and Cryptosporidium oocysts in TGL bioimaging.

Compressive fluorescence microscopy using saliency-guided sparse reconstruction ensemble fusion

Compressive fluorescence microscopy has been proposed as a promising approach for fast acquisitions at sub-Nyquist sampling rates. Given that signal-to-noise ratio (SNR) is very important in the design of fluorescence microscopy systems, a new saliency-guided sparse reconstruction ensemble fusion system has been proposed for improving SNR in compressive fluorescence microscopy. This system produces an ensemble of sparse reconstructions using adaptively optimized probability density functions derived based on underlying saliency rather than the common uniform random sampling approach. The ensemble of sparse reconstructions are then fused together via ensemble expectation merging. Experimental results using real fluorescence microscopy data sets show that significantly improved SNR can be achieved when compared to existing compressive fluorescence microscopy approaches, with SNR increases of 16-9 dB within the noise range of 1.5%-10% standard deviation at the same compression rate.

LIGHT EMITTING DIODES IN BIO-IMAGING

Light-emitting diodes (LEDs) can and are currently integrated into light microscopes. They have numerous advantages as illumination sources. Most notably, they provide intensity (brightness) and spectral control during bio-imaging. For transmitted light imaging, LEDs can replace the traditional tungsten filament bulb, while offering longer life, little-to-no color temperature shift resulting from an intensity change, reduced emission in the infrared region, (a property important for live cell imaging), and reduced cost of ownership. For fluorescent imaging, in which the typical illumination sources are mercury or xenon lamps, LEDs offer the advantages of a longer lifespan, greater spatial and temporal stability, elimination of the need for mechanical shutters and neutral density filters, significantly lower cost of ownership, and reduction of photon dose at the specimen. Additionally, LEDs permit vibration-free, high-speed spectral and temporal modulation. This modulation allows more information to be obtained for a given photon dose.

Pinhole shifting lifetime imaging microscopy

Lifetime imaging microscopy is a powerful tool to probe biological phenomena independent of luminescence intensity and fluorophore concentration. We describe time-resolved imaging of long-lifetime luminescence with an unmodified commercial laser scanning confocal/multiphoton microscope. The principle of the measurement is displacement of the detection pinhole to collect delayed luminescence from a position lagging the rasting laser beam. As proof of principle, luminescence from microspheres containing europium (Eu(3+)), a red emitting probe, was compared to that of short-lifetime green-fluorescing microspheres and/or fluorescein and rhodamine in solution. Using 720-nm two-photon excitation and a pinhole diameter of 1 Airy unit, the short-lifetime fluorescence of fluorescein, rhodamine and green microspheres disappeared much more rapidly than the long-lifetime phosphorescence of Eu(3+) microspheres as the pinhole was repositioned in the lagging direction. In contrast, repositioning of the pinhole in the leading and orthogonal directions caused equal loss of short- and long-lifetime luminescence. From measurements at different lag pinhole positions, a lifetime of 270 micros was estimated for the Eu(3+) microspheres, consistent with independent measurements. This simple adaptation is the basis for quantitative 3-D lifetime imaging microscopy.

Time-gated luminescence microscopy

Autofluorescent algal samples were spiked with europium beads for analysis on a novel all-solid-state, time-gated luminescence (TGL) microscope. Pulsed UV excitation (365 nm) was provided by a high-power UV-LED source fitted to an Olympus BX51 microscope. An "Impactron" electron multiplying charge-coupled-device (CCD) camera acquired images in delayed luminescence mode. Second, we evaluated sensitivity of the instrument by acquiring images of immunofluorescently labeled Giardia cysts with a single-exposure period of 3 ms. The camera was triggered 3 micros after the LED had extinguished to yield a 14-fold increase in signal-to-noise ratio within a single 33 ms capture cycle. This novel instrument could be switched instantly from prompt epifluorescence mode to TGL mode for suppression of short-lived fluorescence.

Solid-state time-gated luminescence microscope with ultraviolet light-emitting diode excitation and electron-multiplying charge-coupled device detection

Many naturally occurring materials are autofluorescent, a property that can reduce the discriminative ability of fluorescence methods, sometimes to the point where they cannot be usefully applied. Shifting from the spectral to the temporal domain, it is possible to discriminate fluorophores on the basis of their fluorescence decay lifetime. Luminophores with sufficiently long lifetimes can be discriminated from short-lived autofluorescence using time-gated luminescence (TGL). This technique relies upon the application of a brief excitation pulse followed by a resolving period to permit short-lived autofluorescence to decay, after which detection is enabled to capture persistent emission. In our studies, a high-power UV LED was mounted in the filter capsule of an Olympus BX51 microscope to serve as the excitation source. The microscope was fitted with an Andor DV885 electron-multiplying CCD (EM-CCD) camera with the trigger input synchronized to UV LED operation. Giardia lamblia cysts labeled with the europium chelate BHHST were analyzed against an autofluorescent background with the TGL microscope. The EM-CCD camera captured useful TGL images in real time with a single exposure cycle. With 4x frame averaging, images acquired in TGL mode showed a 30-fold improvement in SNR compared with conventional fluorescence microscopy.

Fluorescence microscopy: established and emerging methods, experimental strategies, and applications in immunology

Cutting-edge biophysical technologies including total internal reflection fluorescence microscopy, single molecule fluorescence, single channel opening events, fluorescence resonance energy transfer, high-speed exposures, two-photon imaging, fluorescence lifetime imaging, and other tools are becoming increasingly important in immunology as they link molecular events to cellular physiology, a key goal of modern immunology. The primary concern in all forms of microscopy is the generation of contrast; for fluorescence microscopy contrast can be thought of as the difference in intensity between the cell and background, the signal-to-noise ratio. High information-content images can be formed by enhancing the signal, suppressing the noise, or both. As improved tools, such as ICCD and EMCCD cameras, become available for fluorescence imaging in molecular and cellular immunology, it is important to optimize other aspects of the imaging system. Numerous practical strategies to enhance fluorescence microscopy experiments are reviewed. The use of instrumentation such as light traps, cameras, objectives, improved fluorescent labels, and image filtration routines applicable to low light level experiments are discussed. New methodologies providing resolution well beyond that given by the Rayleigh criterion are outlined. Ongoing and future developments in fluorescence microscopy instrumentation and technique are reviewed. This review is intended to address situations where the signal is weak, which is important for emerging techniques stressing super-resolution or live cell dynamics, but is less important for conventional applications such as indirect immunofluorescence. This review provides a broad integrative discussion of fluorescence microscopy with selected applications in immunology.

Practical time-gated luminescence flow cytometry. I: Concepts

The method of time-gated detection of long-lifetime (1-2,000 micros) luminescence-labeled microorganisms following rapid excitation pulses has proved highly efficient in suppressing nontarget autofluorescence (<0.1 micros), scatterings, and other prompt stray light (Hemmila and Mukkala, Crit Rev Clin Lab Sci 2001;38:441-519). The application of such techniques to flow cytometry is highly attractive but there are significant challenges in implementing pulsed operation mode to rapid continuous flowing sample to achieve high cell analysis rates (Leif R, Vallarino L, Rare-earth chelates as fluorescent markers in cell separation and analysis, In: Cell Separation Science and Technology, ACS Symposium Series 464, American Chemical Society, 1991, pp 41-58; Condrau et al., Cytometry 1994;16:187-194; Condrau et al., Cytometry 1994;16:195-205; Shapiro HM, Improving signals from labels: Amplification and other techniques, In: Practical Flow Cytometry, 4th ed., Wiley, New York, 2002, p 345). We present here practical approaches for achieving high cell analysis rates at 100% detection efficiency, using time-gated luminescence (TGL) flow cytometry. In particular, we report that new-generation UV LEDs are practical sources in TGL flow cytometry. Spatial effects of long-lived luminescence from the target fluorophore in a fast-flowing sample stream have been investigated; excitation and detection requirements in TGL flow cytometry were theoretically analyzed; two practical approaches, a triggered model and a continuous flow-section model, were considered as a function of flow speed, sizes and relative positions of the excitation/detection spots, label lifetime, excitation pulse duration/intensity, and detection duration. A particular configuration using LED excitation to detect europium dye-labeled targets in such a system has been modeled in detail. In the triggered model, TGL mode is confined to a low repetition rate (<1 kHz) and engaged only while a target particle is present in the excitation zone. In the flow-section model, TGL mode is engaged continuously at high repetition rates to permit much higher cell arrival rates. The detection of 5.7-microm europium calibration beads in a UV LED-excited TGL flow cytometer has been shown to be feasible with a calculated signal-to-background ratio up to 11:1.

High intensity solid-state UV source for time-gated luminescence microscopy

BACKGROUND

The unique discriminative ability of immunofluorescent probes can be severely compromised when probe emission competes against naturally occurring, intrinsically fluorescent substances (autofluorophores). Luminescence microscopes that operate in the time-domain can selectively resolve probes with long fluorescence lifetimes (tau > 100 micros) against short-lived fluorescence to deliver greatly improved signal-to-noise ratio (SNR). A novel time-gated luminescence microscope design is reported that employs an ultraviolet (UV) light emitting diode (LED) to excite fluorescence from a europium chelate immunoconjugate with a long fluorescence lifetime.

METHODS

A commercial Zeiss epifluorescence microscope was adapted for TGL operation by fitting with a time-gated image-intensified CCD camera and a high-power (100 mW) UV LED. Capture of the luminescence was delayed for a precise interval following excitation so that autofluorescence was suppressed. Giardia cysts were labeled in situ with antibody conjugated to a europium chelate (BHHST) with a fluorescence lifetime >500 micros.

RESULTS

BHHST-labeled Giardia cysts emit at 617 nm when excited in the UV and were difficult to locate within the matrix of fluorescent algae using conventional fluorescence microscopy, and the SNR of probe to autofluorescent background was 0.51:1. However in time-gated luminescence mode with a gate-delay of 5 mus, the SNR was improved to 12.8:1, a 25-fold improvement.

CONCLUSION

In comparison to xenon flashlamps, UV LEDs are inexpensive, easily powered, and extinguish quickly. Furthermore, the spiked emission of the LED enabled removal of spectral filters from the microscope to significantly improve efficiency of fluorescence excitation and capture.

Lanthanide complex-based fluorescence label for time-resolved fluorescence bioassay

Different from organic fluorescence dyes, fluorescent lanthanide complexes have the fluorescence properties of long fluorescence lifetime, large Stokes shift and sharp emission profile, which makes them favorable be used as the fluorescent labeling reagents for microsecond time-resolved fluorescence bioassay. Lanthanide complex-based fluorescence labels have been successfully used for highly sensitive time-resolved fluorescence immunoassay, DNA hybridization assay, cell activity assay, and bio-imaging microscopy assay. Since the technique allows easy distinction of the specific fluorescence signal of the long-lived label from short-lived background noises associated with biological samples, scattering lights (Tyndall, Rayleigh and Raman scatterings) and the optical components (cuvettes, filters and lenses), the sensitivity of fluorescence bioassay has been remarkably improved. This paper summarized the recent developments of lanthanide complex-based fluorescence labels and their applications in time-resolved fluorescence bioassays mainly based on the authors' researches and relative publications.

Time-resolved fluorescence microscopy using an improved europium chelate BHHST for the in situ detection ofCryptosporidium andGiardia

Fluorescent immunoconjugates prepared with the europium chelate BHHCT (4,4'-bis(1'',1'',1'',2'',2'',3'',3''-heptafluoro-4'',6''-hexanedion-6''-yl)-chlorosulfo-o-terphenyl) have previously been reported as suitable labels for time-resolved fluorescence applications. BHHCT is limited by a tendency to destabilize immunoglobulins when covalently bound to the protein at moderate to high fluorophore to protein ratios (F/P). We report a new derivative of BHHCT prepared by appending a short hydrophylic tether to the chlorosulfonate activating group on BHHCT. The new derivative, BHHST (4,4'-bis-(1'',1'',1'',2'',2'',3'',3''-heptafluoro-4'',6''-hexanedion-6''-yl)sulfonylamino-propyl-ester-N-succinimide-ester-o-terphenyl), was activated to bind at the tether terminus with a succinimide leaving group that displayed less aggressive coupling activity and improved storage stability. BHHST has been used to prepare a stable and useful immunoconjugate with the anti-Cryptosporidium monoclonal antibody CRY104. The BHHST immunoconjugate provides more than a 10-fold enhancement in the signal to noise ratio (SNR) of labeled oocyst fluorescence over background when observed using TRFM techniques. An immunoconjugate was also prepared with BHHST and (goat) anti-mouse that effectively labeled Giardia cysts in situ. Detection of cysts with the TRFM was achieved with an 11-fold increase in SNR when a gate-delay of 60 micros was employed. The storage half-life of both immunoconjugates is extended more than 20-fold when compared to immunoconjugates prepared with BHHCT.