Optical properties of breast tumor phantoms containing carbon nanotubes and nanohorns

Dynamic change in optical properties of a nanoparticle embedded tumor phantom for plasmonic photothermal cancer therapeutics

In this study, the temporal dynamic changes in optical properties of gold nanorods (GNR) embedded tumor phantom, during photothermal interaction, are reported for plasmonic photothermal therapeutics. Tumor mimicking bilayer phantoms were prepared by using 1% agarose incorporated with 0.1% coffee powder, 0.3% intralipid solution as epidermis layer; 3% intralipid solution and 0.3% human hemoglobin (Hb) powder as dermis layer. On incorporating GNRs of concentrations 10, 20, and 40 μg/ml within the phantom, the absorption coefficients increases 4-8 times, while there is minimal change in the reduced scattering coefficients. Further the absorption coefficient increased by ~8% with the incorporation of GNRs of concentration 40 μg/ml, while no considerable dynamic change in the optical properties is observed for the phantom embedded with GNRs of concentrations 10, and 20 μg/ml. The discussed results are useful for the selection of GNRs dose for pre-treatment planning of plasmonic photothermal cancer therapeutics.

Carbon-based nanostructures for cancer therapy and drug delivery applications

Synthesis, design, characterization, and application of carbon-based nanostructures (CBNSs) as drug carriers have attracted a great deal of interest over the past half of the century because of their promising chemical, thermal, physical, optical, mechanical, and electrical properties and their structural diversity. CBNSs are well-known in drug delivery applications due to their unique features such as easy cellular uptake, high drug loading ability, and thermal ablation. CBNSs, including carbon nanotubes, fullerenes, nanodiamond, graphene, and carbon quantum dots have been quite broadly examined for drug delivery systems. This review not only summarizes the most recent studies on developing carbon-based nanostructures for drug delivery (e.g. delivery carrier, cancer therapy and bioimaging), but also tries to deal with the challenges and opportunities resulting from the expansion in use of these materials in the realm of drug delivery. This class of nanomaterials requires advanced techniques for synthesis and surface modifications, yet a lot of critical questions such as their toxicity, biodistribution, pharmacokinetics, and fate of CBNSs in biological systems must be answered.

Deep photothermal effect induced by stereotactic laser beams in highly scattering media

Plasmonic photothermal therapy (PPTT), as an increasingly studied treatment alternative, has been widely regarded mostly as a surface tissue treatment choice. Although some techniques have been implemented for interstitial tumors, these involve some grade of invasiveness, as the outer skin is usually broken to introduce light-delivering optical fibers or even catheters. In this work, we present a potential non-invasive strategy using the stereotactic approach, long employed in radiosurgery, by converging multiple near infrared laser beams for PPTT in tissue-equivalent optical phantoms that enclose small gel spheres and simulate interstitial tissue impregnated with plasmonic nanoparticles. The real-time in-depth monitoring of temperature increase is realized by an infrared camera face-on mounted over the phantom. Our results show that a significant reduction in the surface heating can be achieved with this configuration while remarkably increasing the interstitial reach of PPTT, assuring a ∼6^∘C temperature increase for the simulated tumors at 10 mm depth and ∼4^∘C at 15 mm depth and opening up new possibilities for future clinical applications.

Mathematical and computational modeling for the determination of optical parameters of breast cancer cell

This study enumerates the quantitative measurement of optical parameters used in several diagnostic procedures for malignant tissue. Optical diagnosis is proposed due to its non-invasive and non-destructive nature. This paper recapitulates Fresnel equation (polarization independent) to determine the characteristic critical angle of malignant tissue. The critical angle of malignant tissue is lower than healthier tissue and is therefore an optical parameter of interest for lesion tissue diagnosis. Similarly, a quantitative analysis is derived to commensurate refractive index and absorption and reflective property of tissue and its nuance with healthier counterparts. The second dichotomy of the research concentrates on comparing and validating the mathematical analysis with COMSOL Multiphysics® 5.2 simulation. The magnitude of malignant tissue reflectance is obtained across a range of incident angle ranging from 0° to 90°. The simulation results satiate the quantitative analysis with only 1.3% deviation. This quantitative result provides prospect of collaborating bio-electromagnetism results with Artificial Intelligence technology for active disease progression diagnosis utilizing minimum invasive diagnostic procedure.

Plasmonic Nanocomposite Implants for Interstitial Thermotherapy: Experimental and Computational Analysis

The ferromagnetic implant (thermoseeds) technique offers desirable features for interstitial thermotherapy. However, its efficacy has been reported to be limited by issues that are related to the properties of the metal alloys that are used to fabricate them and the high number of thermoseeds needed to achieve therapeutic temperature levels. Here, we present the results of a combination of experimental and computational analysis of plasmonic nanocomposite implants (photoseeds)—a combination of Au nanoparticles (NPs) and poly-dimethylsiloxane (PDMS)—as a model material. We performed structural and optical characterization of the Au NPs and repared Au-PDMS nanocomposites, followed by an elucidation of the heat generation capabilities of the Au-PDMS photoseeds in aqueous solution and in-vitro cancer cell suspension. Based on the experimental results, we developed a three-dimensional (3D) finite element method (FEM) model to predict in-vivo thermal damage profiles in breast tissue. The optical absorbance of the Au-PDMS photoseeds were increasing with the concentration of Au NPs. The photothermal measurements and the in-vivo predictions showed that the photothermal properties of the photoseeds, characteristics of the laser sources, and the duration of heating can be tuned to achieve therapeutic temperature levels under in-vitro and in-vivo conditions. Collectively, the results demonstrate the feasibility of using photoseeds for interstitial thermotherapy.

Collagen/kerateine multi-protein hydrogels as a thermally stable extracellular matrix for 3D in vitro models

Objective: To determine whether the addition of kerateine (reduced keratin) in rat tail collagen type I hydrogels increases thermal stability and changes material properties and supports cell growth for use in cellular hyperthermia studies for tumor treatment.Methods: Collagen type I extracted from rat tail tendon was combined with kerateine extracted from human hair fibers. Thermal, mechanical, and biocompatibility properties and cell behavior was assessed and compared to 100% collagen type I hydrogels to demonstrate their utility as a tissue model for 3D in vitro testing.Results: A combination (i.e., containing both collagen 'C/KNT') hydrogel was more thermally stable than pure collagen hydrogels and resisted thermal degradation when incubated at a hyperthermic temperature of 47°C for heating durations up to 60 min with a higher melting temperature measured by DSC. An increase in the storage modulus was only observed with an increased collagen concentration rather than an increased KTN concentration; however, a change in ECM structure was observed with greater fiber alignment and width with an increase in KTN concentration. The C/KTN hydrogels, specifically 50/50 C/KTN hydrogels, also supported the growth and of fibroblasts and MDA-MB-231 breast cancer cells similar to those seeded in 100% collagen hydrogels.Conclusion: This multi-protein C/KTN hydrogel shows promise for future studies involving thermal stress studies without compromising the 3D ECM environment or cell growth.

Carbon Nanohorns as Effective Nanotherapeutics in Cancer Therapy

Different carbon nanostructures have been explored as functional materials for the development of effective nanomaterials in cancer treatment applications. This review mainly aims to discuss the features, either strength or weakness, of carbon nanohorn (CNH), carbon conical horn-shaped nanostructures of sp2 carbon atoms. The interest for these materials arises from their ability to couple the clinically relevant properties of carbon nanomaterials as drug carriers with the negligible toxicity described in vivo. Here, we offer a comprehensive overview of the recent advances in the use of CNH in cancer treatments, underlining the benefits of each functionalization route and approach, as well as the biological performances of either loaded and unloaded materials, while discussing the importance of delivery devices.

Human Breast Numerical Model Generation Based on Deep Learning for Photoacoustic Imaging

Photoacoustic imaging which combines high contrast of optical imaging and high resolution of ultrasound imaging, can provide functional information, potentially playing a crucial role in the study of breast cancer diagnostics. However, open source dataset for PA imaging research is insufficient on account of lacking clinical data. To tackle this problem, we propose a method to automatically generate breast numerical model for photoacoustic imaging. The different type of tissues is automatically extracted first by employing deep learning and other methods from mammography. And then the tissues are combined by mathematical set operation to generate a new breast image after being assigned optical and acoustic parameters. Finally, breast numerical model with proper optical and acoustic properties are generated, which are specifically suitable for PA imaging studies, and the experiment results indicate that our method is feasible with high efficiency.

Light-Responsive Inorganic Biomaterials for Biomedical Applications

Light-responsive inorganic biomaterials are an emerging class of materials used for developing noninvasive, noncontact, precise, and controllable medical devices in a wide range of biomedical applications, including photothermal therapy, photodynamic therapy, drug delivery, and regenerative medicine. Herein, a range of biomaterials is discussed, including carbon-based nanomaterials, gold nanoparticles, graphite carbon nitride, transition metal dichalcogenides, and up-conversion nanoparticles that are used in the design of light-responsive medical devices. The importance of these light-responsive biomaterials is explored to design light-guided nanovehicle, modulate cellular behavior, as well as regulate extracellular microenvironments. Additionally, future perspectives on the clinical use of light-responsive biomaterials are highlighted.

Thermal Analysis of Infrared Irradiation-Assisted Nanosecond-Pulsed Tumor Ablation

Nanosecond Pulsed Electric Fields (nsPEF) have the potential to treat a variety of cancer types including melanoma, pancreatic and lung squamous cancers. Recent studies show that nsPEF-based cancer therapy may be improved further with the assistance of moderate heating of the target. A feedback-looped heating system, utilizing a 980-nm fiber optic laser, was integrated into nsPEF electrodes for tumor ablation. The laser beam profile was determined to be Gaussian using a knife-edge technique. Thermal properties of the biological target were evaluated based on the treatment area, penetration depth and thermal distribution due to laser irradiation with or without nsPEF. Synergistic effects between nsPEF and the moderately elevated temperature at the target was observed, resulting in enhanced overall survival tumor regression up to 50% in the treatment of lung squamous cell cancer in mice.

Low-cost fabrication of optical tissue phantoms for use in biomedical imaging

The rapid development of new optical imaging techniques is dependent on the availability of low-cost and easily reproducible standards for technique validation. This work describes a low-cost fabrication process of an agar gel-based phantom that may accurately simulate the optical properties of different human tissues at 532 and 630nm wavelengths. It was designed to match the optical properties of the brain, bladder wall, and lung tissues. These low-cost phantoms use agar powders dissolved in water as the bulk matrix. The latter is loaded with varying amounts of India ink, and aluminium oxide Al2O3 particles for optical absorption and scattering targets. The optical properties (absorption and scattering coefficients), the primary design factor and critical parameters of these phantoms were deduced from measurements of the total attenuation coefficients( μ t ) . It is anticipated that the constructed tissue phantoms have the potential to be used as a reference standard since it's possible to preserve the optical properties in a period exceeding two years, under ideal storage conditions.

Assessing fluorescence detection and effective photothermal therapy of near-infrared polymer nanoparticles using alginate tissue phantoms

OBJECTIVE

Photothermal therapy (PTT) uses light absorbing materials to generate heat for treatment of diseases, like cancer. The advantages of using PTT components that absorb in the near-infrared (NIR) include reduced tissue auto-fluorescence and higher penetration depths. However, NIR laser light can still be scattered and absorbed by biological tissues, thus decreasing the amount of the energy reaching the PTT agents. We have developed two distinct formulations of NIR-absorbing nanoparticles, one which can be utilized for PTT only, and another for both PTT and fluorescence imaging of colorectal cancer. In this work, the fluorescence detection limit and the PTT heating potential of the two nanoparticle types were determined using alginate tissue phantoms. The objective of this study was to determine the PTT efficiency and theranostic potential of the nanoparticles by irradiating 3D collagen tumor spheroids, containing nanoparticles and CT26 mouse colorectal cancer cells, through increasing tissue phantom thicknesses and then quantifying cell death. Materials and Methods Our lab has previously developed nanoparticles based on the semiconducting, conjugated polymer poly[4,4-bis(2-ethylhexyl)-cyclopenta[2,1-b;3,4-b']dithiophene-2,6-diyl-alt-2,1,3-benzoselenadiazole-4,7-diyl] (PCPDTBSe). We have also made a hybrid nanoparticle that heats and fluoresces by combining PCPDTBSe polymer with the fluorescent poly[(9,9-dihexylfluorene)-co-2,1,3-benzothiadiazole-co-4,7-di(thiophen-2-yl)-2,1,3-benzothiadiazole] (PFBTDBT10) polymer to yield nanoparticles termed Hybrid Donor-Acceptor Polymer Particles (H-DAPPs). H-DAPPs and PCPDTBSe nanoparticles were added to three-dimensional collagen gel tumor spheroids in order to represent nanoparticles in a tumor. Alginate tissue phantoms, comprised of an optical scattering agent (Intralipid) and an optical absorbing material (hemoglobin) in order to mirror biological tissue scattering effects, were used to simulate increasing tissue thickness between the nanoparticles and the PTT energy source.

RESULTS

Fluorescence from the H-DAPPs was detectable through 6 mm of tissue phantoms. It was found that less than 10% of the laser energy could penetrate through 9 mm of tissue phantoms and only 60% of the laser energy passed through the 1.5 mm phantoms, regardless of laser power. PTT experiments, using 800 nm light at 2.2 W/cm² for 60 s through tissue phantoms to stimulate nanoparticle-doped tumor spheroids, showed 55% cell death through 3 mm of tissue phantoms using H-DAPPs. Results from using the PCPDTBSe nanoparticles showed 72% cell death through 3 mm and over 50% cell death through 6 mm of tissue phantoms.

CONCLUSION

The results of this work validated the heating potential and fluorescence detection limitations of two theranostic polymer nanoparticles by utilizing alginate tissue phantoms and 3D tumor spheroids. H-DAPPs and PCPDTBSe polymer nanoparticles can be utilized as effective PTT agents by exploiting their absorption of NIR light and H-DAPPs have advantageous fluorescence for imaging colorectal cancer. The data generated from this study design can allow for other NIR absorbing and fluorescing nanoparticle formulations to be evaluated prior to in vivo experimentation. Lasers Surg. Med. 50:1040-1049, 2018. © 2018 Wiley Periodicals, Inc.

A carbon nanotube-gemcitabine-lentinan three-component composite for chemo-photothermal synergistic therapy of cancer

PURPOSE

Gemcitabine's clinical application is limited due to its short plasma half-life and poor uptake by cells. To address this problem, a drug delivery three-component composite, multiwalled carbon nanotubes (MWNTs)/gemcitabine (Ge)/lentinan (Le; MWNTs-Ge-Le), was fabricated in our study. Moreover, the combination of chemotherapy and photothermal therapy was employed to enhance antitumor efficacy.

METHODS

In this study, we conjugated gemcitabine and lentinan with MWNTs via a covalent and noncovalent way to functionalize with MWNTs, and the chemical structure of MWNTs-Ge-Le was characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis and transmission electron microscopy. Using the composite and an 808 nm laser, we treated tumors, both in vitro and in vivo, and investigated the photothermal responses and the anticancer efficacy.

RESULTS

The MWNTs-Ge-Le composite could efficiently cross cell membrane, having a higher antitumor activity than MWNTs, gemcitabine and MWNTs-Ge in vitro and in vivo. Our study on the MWNTs-Ge-Le composite with an 808 nm laser radiation showed the combination of drug therapy and near-infrared photothermal therapy possesses great synergistic antitumor efficacy.

CONCLUSION

The MWNTs-Ge-Le three-component anticancer composite can serve as a promising candidate for cancer therapy in the combination of chemotherapy and photothermal therapy.

Tissue-mimicking gel phantoms for thermal therapy studies

Tissue-mimicking phantoms that are currently available for routine biomedical applications may not be suitable for high-temperature experiments or calibration of thermal modalities. Therefore, design and fabrication of customized thermal phantoms with tailored properties are necessary for thermal therapy studies. A multitude of thermal phantoms have been developed in liquid, solid, and gel forms to simulate biological tissues in thermal therapy experiments. This article is an attempt to outline the various materials and techniques used to prepare thermal phantoms in the gel state. The relevant thermal, electrical, acoustic, and optical properties of these phantoms are presented in detail and the benefits and shortcomings of each type are discussed. This review could assist the researchers in the selection of appropriate phantom recipes for their in vitro study of thermal modalities and highlight the limitations of current phantom recipes that remain to be addressed in further studies.

Reusable heat-sensitive phantom for precise estimation of thermal profile in hyperthermia application

PURPOSE

The emergence of thermal modalities has promoted the use of heat-sensitive phantoms for calibration, measurement, and verification purposes. However, development of durable phantoms with high precision ability to represent the temperature distribution remains a challenge. This study aims to introduce a reusable phantom that provides an accurate assessment of the heated region in various thermal modalities.

MATERIALS AND METHODS

The phantom contains a thermochromic dye that is transparent blue at room temperature and becomes colourless after exceeding a threshold temperature. In order to determine the threshold temperature of the phantom, spectrophotometry analysis was performed. The various thermal (specific heat, thermal conductivity, melting point and latent heat of melting) and acoustic (sound speed, attenuation) properties of this phantom were measured and compared with those of the reference phantom without dye. The application of this phantom for radio-frequency and magnetic resonance guided focused ultrasound modalities was also examined.

RESULTS

The spectrophotometry analysis showed a threshold temperature of 50 ± 3 °C for this phantom. The results also demonstrated a 6 °C difference between the onset and ending temperatures of the discolouration process. Moreover, the starting temperature of colouration during cooling was found to be 4 °C lower than the ending temperature of discolouration. The sound speed, attenuation, specific heat, thermal conductivity and melting point of the heat-sensitive phantom were statistically equal to those of the reference phantom; however, the latent heat, and onset temperature of the melting of the heat-sensitive phantom were decreased by addition of the dye.

CONCLUSIONS

The developed phantom is applicable for accurate evaluation of temperature variations in various thermal modalities.

3D viability imaging of tumor phantoms treated with single-walled carbon nanohorns and photothermal therapy

A new image analysis method called the spatial phantom evaluation of cellular thermal response in layers (SPECTRL) is presented for assessing spatial viability response to nanoparticle enhanced photothermal therapy in tissue representative phantoms. Sodium alginate phantoms seeded with MDA-MB-231 breast cancer cells and single-walled nanohorns were laser irradiated with an ytterbium fiber laser at a wavelength of 1064 nm and irradiance of 3.8 W cm(-2) for 10-80 s. SPECTRL quantitatively assessed and correlated 3D viability with spatiotemporal temperature. Based on this analysis, kill and transition zones increased from 3.7 mm(3) and 13 mm(3) respectively to 44.5 mm(3) and 44.3 mm(3) as duration was increased from 10 to 80 s. SPECTRL provides a quantitative tool for measuring precise spatial treatment regions, providing information necessary to tailor therapy protocols.

Modulated fluorophore signal recovery buried within tissue mimicking phantoms

Optically modulated fluorescence from ∼140 nM Cy5 is visualized when embedded up to 6 mm within skin tissue mimicking phantoms, even in the presence of overwhelming background fluorescence and scatter. Experimental and finite element analysis (FEA)-based computational models yield excellent agreement in signal levels and predict biocompatible temperature changes. Using synchronously amplified fluorescence image recovery (SAFIRe), dual-laser excitation (primary laser: λ = 594 nm, 0.29 kW/cm(2); secondary laser: λ = 710 nm, 5.9 kW/cm(2), intensity-modulated at 100 Hz) simultaneously excites fluorescence and dynamically optically reverses the dark state buildup of primary laser-excited Cy5 molecules. As the modulated secondary laser both directly modulates Cy5 emission and is of lower energy than the collected Cy5 fluorescence, modulated Cy5 fluorescence in phantoms is free of obscuring background emission. The modulated fluorescence emission due to the secondary laser was recovered by Fourier transformation, yielding a specific and unique signature of the introduced fluorophores, with largely background-free detection, at excitation intensities close to the maximum permissible exposure (MPE) for skin. Experimental and computational models agree to within 8%, validating the computational model. As modulated fluorescence depends on the presence of both lasers, depth information as a function of focal position is also readily obtained from recovered modulated signal strength.

Effect of antioxidants on enzyme-catalysed biodegradation of carbon nanotubes

The growing applications of carbon nanotubes (CNTs) inevitably increase the risk of exposure to this potentially toxic nanomaterial. In an attempt to address this issue, research has been implemented to study the biodegradation of CNTs. In particular, myeloperoxidase (MPO), an enzyme expressed by inflammatory cells of animals including humans, catalyse the degradation of oxidized carbon nanomaterials. While reactive intermediates generated by MPO efficiently degrade oxidized single-walled carbon nanotubes (o-SWCNTs); the exact mechanism of enzyme-catalysed biodegradation remains ambiguous. In this work, we tried to explain enzymatic oxidation in terms of redox potentials by employing competitive substrates for MPO such as chloride, which is oxidized by MPO to form a strong oxidant (hypochlorite), and antioxidants that have lower redox potentials than CNTs. Employing transmission electron microscopy, Raman spectroscopy, and vis-NIR absorption spectroscopy, we demonstrate that the addition of antioxidants, L-ascorbic acid and L-glutathione, with or without chloride significantly mitigates MPO-catalysed biodegradation of o-SWCNTs. This study focuses on a fundamental understanding of the mechanisms of enzymatic biodegradation of CNTs and the impact of antioxidants on these pathways.

Spatial and temporal measurements of temperature and cell viability in response to nanoparticle-mediated photothermal therapy

Aim: Nanoparticle-enhanced photothermal therapy is a promising alternative to tumor resection. However, quantitative measurements of cellular response to these treatments are limited. This article introduces a Bimodal Enhanced Analysis of Spatiotemporal Temperature (BEAST) algorithm to rapidly determine the viability of cancer cells in vitro following photothermal therapy alone or in combination with nanoparticles. Materials & methods: To illustrate the capability of the BEAST viability algorithm, single wall carbon nanohorns were added to renal cancer (RENCA) cells in vitro and time-dependent spatial temperature maps measured with an infrared camera during laser therapy were correlated with post-treatment cell viability distribution maps obtained by cell-staining fluorescent microscopy. Conclusion: The BEAST viability algorithm accurately and rapidly determined the cell viability as a function of time, space and temperature.

Original submitted 13 July 2011; Revised submitted 12 March 2012; Published online 20 July 2012

Spatially controlled photothermal heating of bladder tissue through single-walled carbon nanohorns delivered with a fiberoptic microneedle device

Laser-based photothermal therapies for urothelial cell carcinoma (UCC) are limited to thermal ablation of superficial tumors, as treatment of invasive lesions is hampered by shallow light penetration in bladder tissue at commonly used therapeutic wavelengths. This study evaluates the utilization of sharp, silica, fiberoptic microneedle devices (FMDs) to deliver single-walled carbon nanohorns (SWNHs) serving as exogenous chromophores in conjunction with a 1,064-nm laser to amplify thermal treatment doses in a spatially controlled manner. Experiments were conducted to determine the lateral and depth dispersal of SWNHs in aqueous solution (0.05 mg/mL) infused through FMDs into the wall of healthy, inflated, ex vivo porcine bladders. SWNH-perfused bladder regions were irradiated with a free-space, CW, 1,064-nm laser in order to determine the SWNH efficacy as exogenous chromophores within the organ. SWNHs infused at a rate of 50 μL/min resulted in an average lateral expansion rate of 0.36 ± 0.08 cm(2)/min. Infused SWNHs dispersal depth was limited to the urothelium and muscular propria for 50 μL/min infusions of 10 min or less, but dispersed through the entire thickness after a 15-min infusion period. Irradiation of SWNH-perfused bladder tissue with 1,064 nm laser light at 0.95 W/cm(2) over 40 s exhibited a maximum increase of approximately 19 °C compared with an increase of approximately 3 °C in a non-perfused control. The results indicate that these silica FMDs can successfully penetrate into the bladder wall to rapidly distribute SWNHs with some degree of lateral and depth control and that SWNHs may be a viable exogenous chromophore for photothermal amplification of laser-based UCC treatments.

Photothermic regulation of gene expression triggered by laser-induced carbon nanohorns

The development of optical methods to control cellular functions is important for various biological applications. In particular, heat shock promoter-mediated gene expression systems by laser light are attractive targets for controlling cellular functions. However, previous approaches have considerable technical limitations related to their use of UV, short-wavelength visible (vis), and infrared (IR) laser light, which have poor penetration into biological tissue. Biological tissue is relatively transparent to light inside the diagnostic window at wavelengths of 650-1,100 nm. Here we present a unique optical biotechnological method using carbon nanohorn (CNH) that transforms energy from diagnostic window laser light to heat to control the expression of various genes. We report that with this method, laser irradiation within the diagnostic window resulted in effective heat generation and thus caused heat shock promoter-mediated gene expression. This study provides an important step forward in the development of light-manipulated gene expression technologies.