A complex dual-modality kidney phantom for renal biopsy studies

Assessing suitability and stability of materials for a head and neck anthropomorphic multimodality (MRI/CT) phantoms for radiotherapy

Objective:This study aims to identify and evaluate suitable and stable materials for developing a head and neck anthropomorphic multimodality phantom for radiotherapy purposes. These materials must mimic human head and neck tissues in both computed tomography (CT) and magnetic resonance imaging (MRI) and maintain stable imaging properties over time and after radiation exposure, including the high levels associated with linear accelerator (linac) use.Approach:Various materials were assessed by measuring their CT numbers and T1 and T2 relaxation times. These measurements were compared to literature values to determine how closely the properties of the candidate materials resemble those of human tissues in the head and neck region. The stability of these properties was evaluated monthly over a year and after radiation exposure to doses up to 1000 Gy. Statistical analyzes were conducted to identify any significant changes over time and after radiation exposure.Main results:10% and 12.6% Polyvinyl alcohol cryogel (PVA-c) both exhibited T1 and T2 relaxation times and CT numbers within the range appropriate for brain grey matter. 14.3% PVA-c and some plastic-based materials matched the MRI properties of brain white matter, with CT numbers close to the clinical range. Additionally, some plastic-based materials showed T1 and T2 relaxation times consistent with MRI properties of fat, although their CT numbers were not suitable. Over time and after irradiation, 10% PVA-c maintained consistent properties for brain grey matter. 12.6% PVA-c's T1 relaxation time decreased beyond the range after the first month.Significance:This study identified 10% PVA-c as a substitute for brain grey matter, demonstrating stable imaging properties over a year and after radiation exposure up to 1000 Gy. However, the results highlight a need for further research to find additional materials to accurately simulate a wider range of human tissues.

A low-cost PVC-based dual-modality kidney phantom

Phantoms are invaluable tools broadly used for research and training purposes designed to mimic tissues and structures in the body. In this paper, polyvinyl chloride (PVC)-plasticizer and silicone rubbers were explored as economical materials to reliably create long-lasting, realistic kidney phantoms with contrast under both ultrasound (US) and X-ray imaging. The radiodensity properties of varying formulations of soft PVC-based gels were characterized to allow adjustable image intensity and contrast. Using this data, a phantom creation workflow was established which can be easily adapted to match radiodensity values of other organs and soft tissues in the body. Internal kidney structures such as the medulla and ureter were created using a two-part molding process to allow greater phantom customization. The kidney phantoms were imaged under US and X-ray scanners to compare the contrast enhancement of a PVC-based medulla versus a silicone-based medulla. Silicone was found to have higher attenuation than plastic under X-ray imaging, but poor quality under US imaging. PVC was found to exhibit good contrast under X-ray imaging and excellent performance for US imaging. Finally, the durability and shelf life of our PVC-based phantoms were observed to be vastly superior to that of common agar-based phantoms. The work presented here allows extended periods of usage and storage for each kidney phantom while simultaneously preserving anatomical detail, contrast under dual-modality imaging, and low cost of materials.