Single-molecule detection of biomarker and localized cellular photothermal therapy using an optical microfiber with nanointerface

High-throughput single biomarker identification using droplet nanopore

Biomarkers are present in various metabolism processes, demanding precise and meticulous analysis at the single-molecule level for accurate clinical diagnosis. Given the need for high sensitivity, biological nanopore have been applied for single biomarker sensing. However, the detection of low-volume biomarkers poses challenges due to their low concentrations in dilute buffer solutions, as well as difficulty in parallel detection. Here, a droplet nanopore technique is developed for low-volume and high-throughput single biomarker detection at the sub-microliter scale, which shows a 2000-fold volume reduction compared to conventional setups. To prove the concept, this nanopore sensing platform not only enables multichannel recording but also significantly lowers the detection limit for various types of biomarkers such as angiotensin II, to 42 pg. This advancement enables direct biomarker detection at the picogram level. Such a leap forward in detection capability positions this nanopore sensing platform as a promising candidate for point-of-care testing of biomarker at single-molecule level, while substantially minimizing the need for sample dilution.

An Optical Fiber-Based Nanomotion Sensor for Rapid Antibiotic and Antifungal Susceptibility Tests

The emergence of antibiotic and antifungal resistant microorganisms represents nowadays a major public health issue that might push humanity into a post-antibiotic/antifungal era. One of the approaches to avoid such a catastrophe is to advance rapid antibiotic and antifungal susceptibility tests. In this study, we present a compact, optical fiber-based nanomotion sensor to achieve this goal by monitoring the dynamic nanoscale oscillation of a cantilever related to microorganism viability. High detection sensitivity was achieved that was attributed to the flexible two-photon polymerized cantilever with a spring constant of 0.3 N/m. This nanomotion device showed an excellent performance in the susceptibility tests of Escherichia coli and Candida albicans with a fast response in a time frame of minutes. As a proof-of-concept, with the simplicity of use and the potential of parallelization, our innovative sensor is anticipated to be an interesting candidate for future rapid antibiotic and antifungal susceptibility tests and other biomedical applications.

Marriage of a Dual-Plasmonic Interface and Optical Microfiber for NIR-II Cancer Theranostics

The use of light as a powerful tool for disease treatment has introduced a new era in tumor treatment and provided abundant opportunities for light-based tumor theranostics. This work reports a photothermal theranostic fiber integrating cancer detection and therapeutic functions. Its self-heating effect can be tuned at ultralow powers and used for self-heating detection and tumor ablation. The fiber, consisting of a dual-plasmonic nanointerface and an optical microfiber, can be used to distinguish cancer cells from normal cells, quantify cancer cells, perform hyperthermal ablation of cancer cells, and evaluate the ablation efficacy. Its cancer cell ablation rate reaches 89% in a single treatment. In vitro and in vivo studies reveal quick, deep-tissue photonic hyperthermia in the NIR-II window, which can markedly ablate tumors. The marriage of a dual-plasmonic nanointerface and an optical microfiber presents a novel paradigm in photothermal therapy, offering the potential to surmount the challenges posed by limited light penetration depth, nonspecific accumulation in normal tissues, and inadvertent damage in current methods. This work thus provides insight for the exploration of an integrated theranostic platform with simultaneous functions in cancer diagnostics, therapeutics, and postoperative monitoring for future practical applications.

Preparation of Well-Constructed and Metal-Modified Covalent Organic Framework Nanoparticles for Biosensing Design with Cascade Catalytic Capability

Uniform covalent organic framework nanoparticles (COF NPs) with a well-defined pore structure may provide a robust platform for scaffolding enzymes. Herein, bipyridine-based spherical COF NPs have been successfully prepared in this work through the Schiff base condensation reaction. Moreover, they are functionalized by metal modification and are further used for biosensor fabrication. Experimental results reveal that the metal-modified COF NPs also display impressive peroxidase-like catalytic activities, while they can load enzymes, such as glucose oxidase (GOx) and sarcosine oxidase (SOx), to develop a cascade catalysis system for design of various kinds of biosensors with very well performance. For example, the optimized GOx@Fe-COFs can achieve a sensitive detection of glucose with a low limit of detection (LOD) of 12.8 μM. Meanwhile, the enzymes also exhibit a commendable preservation of 80% enzymatic activity over a span of 14 days under ambient conditions. This work may pave the way for advancing cascade catalysis and the analysis of different kinds of biological molecules based on COF NPs.

Plasmonic Coupling on an Optical Microfiber Surface: Enabling Single-Molecule and Noninvasive Dopamine Detection

Optical fibers can be effective biosensors when employed in early-stage diagnostic point-of-care devices as they can avoid interference from molecules with similar redox potentials. Nevertheless, their sensitivity needs to be improved for real-world applications, especially for small-molecule detection. This work demonstrates an optical microfiber biosensor for dopamine (DA) detection based on the DA-binding-induced aptamer conformational transitions that occur at plasmonic coupling sites on a double-amplified nanointerface. The sensor exhibits ultrahigh sensitivity when detecting DA molecules at the single-molecule level; additionally, this work provides an approach for overcoming optical device sensitivity limits, further extending optical fiber single-molecule detection to a small molecule range (e.g., DA and metal ions). The selective energy enhancement and signal amplification at the binding sites effectively avoid nonspecific amplification of the whole fiber surface which may lead to false-positive results. The sensor can detect single-molecule DA signals in body-fluids. It can detect the released extracellular DA levels and monitor the DA oxidation process. An appropriate aptamer replacement allows the sensor to be used for the detection of other target small molecules and ions at the single-molecule level. This technology offers alternative opportunities for developing noninvasive early-stage diagnostic point-of-care devices and flexible single-molecule detection techniques in theoretical research.

Microfluidic Biosensor Based on Molybdenum Disulfide (MoS2) Modified Thin-Core Microfiber for Immune Detection of Toxoplasma gondii

Toxoplasma gondii (T. gondii) is a zoonotic parasite that is widely distributed and seriously endangers public health and human health. Therefore, accurate and effective detection of T. gondii is crucial. This study proposes a microfluidic biosensor using a thin-core microfiber (TCMF) coated with molybdenum disulfide (MoS₂) for immune detection of T. gondii. The single-mode fiber was fused with the thin-core fiber, and the TCMF was obtained by arc discharging and flame heating. In order to avoid interference and protect the sensing structure, the TCMF was encapsulated in the microfluidic chip. MoS₂ and T. gondii antigen were modified on the surface of TCMF for the immune detection of T. gondii. Experimental results showed that the detection range of the proposed biosensor for T. gondii monoclonal antibody solutions was 1 pg/mL to 10 ng/mL with sensitivity of 3.358 nm/log(mg/mL); the detection of limit was calculated to be 87 fg/mL through the Langmuir model; the dissociation constant and the affinity constant were calculated to be about 5.79 × 10^-13 M and 1.727 × 10¹⁴ M^-1, respectively. The specificity and clinical characteristics of the biosensor was explored. The rabies virus, pseudorabies virus, and T. gondii serum were used to confirm the excellent specificity and clinical characteristics of the biosensor, indicating that the proposed biosensor has great application potential in the biomedical field.

High-power continuous-wave optical waveguiding in a silica micro/nanofibre

As miniature fibre-optic platforms, micro/nanofibres (MNFs) taper-drawn from silica fibres have been widely studied for applications from optical sensing, nonlinear optics to optomechanics and atom optics. While continuous-wave (CW) optical waveguiding is frequently adopted, so far almost all MNFs are operated in low-power region (e.g., <0.1 W). Here, we demonstrate high-power low-loss CW optical waveguiding in MNFs around 1550-nm wavelength. We show that a pristine MNF, even with a diameter down to 410 nm, can waveguide an optical power higher than 10 W, which is about 30 times higher than demonstrated previously. Also, we predict an optical damage threshold of 70 W. In high-power CW waveguiding MNFs, we demonstrate high-speed optomechanical driving of microparticles in air, and second harmonic generation efficiency higher than those pumped by short pulses. Our results may pave a way towards high-power MNF optics, for both scientific research and technological applications.

Microfluidic immunosensor based on a graphene oxide functionalized double helix microfiber coupler for anti-Müllerian hormone detection

A label-free microfluidic immunosensor based on the double helix microfiber coupler (DHMC) coated with graphene oxide (GO) was proposed for the specific detection of anti-Müllerian hormone (AMH). Two single-mode optical fibers were twisted in a parallel direction, the coning machine was used to fuse and taper them, and the high-sensitivity DHMC was obtained. To make a stable sensing environment, it was immobilized in a microfluidic chip. And then, the DHMC was modified by GO and bio-functionalized by the AMH monoclonal antibodies (anti-AMH MAbs) for the specific detection of AMH. The experimental results showed that the detection range of the immunosensor for AMH antigen solutions was 200 fg/mL∼50 µg/mL, the detection of limit (LOD) was ∼235.15 fg/mL, and the detection sensitivity and the dissociation coefficient were ∼3.518 nm/(log(mg/mL)) and ∼1.85 × 10 ^{- 12} M, respectively. The alpha fetoprotein (AFP), des-carboxy prothrombin (DCP), growth stimulation expressed gene 2 (ST2) and AMH serum were used to confirm the excellent specific and clinical properties of the immunosensor, showing that the proposed immunosensor was easy-made and can be potentially applied in the biosensing field.

Combined Ultrasensitive Detection of Renal Cancer Proteins and Cells Using an Optical Microfiber Functionalized with Ti3C2 MXene and Gold Nanorod-Nanosensitized Interfaces

The ultrasensitive and quantitative detection of renal cancer protein biomarkers present at ultralow concentrations for early-stage cancer diagnosis requires a biosensing probe possessing ultrahigh detection sensitivity and remarkable biosensing selectivity. Here, we report an optical microfiber integrated with Ti₃C₂-supported gold nanorod hybrid nanointerfaces for implementation in ultrasensitive sensing of the carbonic anhydrase IX (CAIX) protein and renal cancer cells. Because the evanescent field of the fiber is strongly coupled with nanointerfaces in the near-infrared region, the proposed optical microfiber biosensor achieves ultrahigh-sensitivity detection of the CAIX protein biomarker with ultralow limits of detection (LODs) of 13.8 zM in pure buffer solution and 0.19 aM in 30% serum solution. In addition, the proposed sensor also successfully and specifically recognizes living renal cancer cells in cell culture media with a LOD of 180 cells/mL. This strategy may serves as a powerful biosensing platform that combines the quantification of protein biomarkers and cancer cells, resulting in a higher accuracy of early-stage renal cancer diagnosis and screenings.

Optical Vernier sensor based on a cascaded tapered thin-core microfiber for highly sensitive refractive index sensing

This study proposes a refractive index (RI) sensor using a cascaded tapered thin-core microfiber (TTCMF) based on the Vernier effect. The thin-core fiber was made into a TTCMF by arc discharging and flame heating and then sandwiched between two single-mode fibers (SMFs). The two structures with the same SMF-TTCMF-SMF but slightly different free spectral ranges (FSRs) were cascaded to generate the Vernier effect. The FSR varied with the taper parameters of TTCMF. The RI sensitivities of a single TTCMF sensor, series SMF-TTCMF-SMF sensor, and parallel SMF-TTCMF-SMF sensor were compared and analyzed. Using the Vernier effect in the RI measurement range from 1.3313 to 1.3392, a very high RI sensitivity of -15,053.411n m/R I U was obtained using the series SMF-TTCMF-SMF structure, and -16,723.243n m/R I U using the parallel structure, which were basically consistent with the simulation results. Compared with the RI sensitivity of the single TTCMF sensor, the RI sensitivities of series and parallel sensors were increased by 4.65 times and 5.16 times, respectively. In addition, in the temperature range from 35°C to 65°C, temperature sensitivities of -0.196n m/ ^∘ C and -0.0489n m/ ^∘ C were obtained using series and parallel structures, respectively; the corresponding temperature cross errors were 1.302×10^-5 R I U/ ^∘ C and 2.92×10^-6 R I U/ ^∘ C, respectively. Based on the advantages of high RI sensitivity, simple structure, low-temperature cross sensitivity, and convenient fabrication, the proposed sensors have great potential in biosensing fields.

Single-Particle Optical Imaging for Ultrasensitive Bioanalysis

The quantitative detection of critical biomolecules and in particular low-abundance biomarkers in biofluids is crucial for early-stage diagnosis and management but remains a challenge largely owing to the insufficient sensitivity of existing ensemble-sensing methods. The single-particle imaging technique has emerged as an important tool to analyze ultralow-abundance biomolecules by engineering and exploiting the distinct physical and chemical property of individual luminescent particles. In this review, we focus and survey the latest advances in single-particle optical imaging (OSPI) for ultrasensitive bioanalysis pertaining to basic biological studies and clinical applications. We first introduce state-of-the-art OSPI techniques, including fluorescence, surface-enhanced Raman scattering, electrochemiluminescence, and dark-field scattering, with emphasis on the contributions of various metal and nonmetal nano-labels to the improvement of the signal-to-noise ratio. During the discussion of individual techniques, we also highlight their applications in spatial-temporal measurement of key biomarkers such as proteins, nucleic acids and extracellular vesicles with single-entity sensitivity. To that end, we discuss the current challenges and prospective trends of single-particle optical-imaging-based bioanalysis.

Prussian blue: from advanced electrocatalyst to nanozymes defeating natural enzyme

The pathway from the advanced electrocatalyst to nanozymes defeating natural enzyme is reviewed. Prussian blue, being the most advantageous electrocatalyst for hydrogen peroxide reduction, is obviously the best candidate for mimicking peroxidase activity. Indeed, catalytically synthesized Prussian blue nanoparticles are characterized by the catalytic rate constants, which are significantly (up to 4 orders of magnitude) higher than for enzyme peroxidase. Displaying in addition the enzymatic specificity in terms of an absence of oxidase-like activity, catalytically synthesized Prussian blue nanoparticles can be referred to as nanozymes. The latter provide the most versatile method for surface covering with the electrocatalyst, allowing to modify non-traditional materials like boron-doped diamond. For stabilization, Prussian blue core can be covered with nickel hexacyanoferrate shell; the resulting core-shell nanozymes still defeat natural enzyme in terms of activity. Discovering the catalytic pathway of nanozymes "artificial peroxidase" action, we have found the novel advantage of nanozymes over the corresponding biological catalysts: their dramatically (100 times) improved bimolecular rate constants.

Fiber-Optic Theranostics (FOT): Interstitial Fiber-Optic Needles for Cancer Sensing and Therapy

Photonics has spurred a myriad of diagnostic and therapeutic applications for defeating cancer owing to its superiority in spatiotemporal maneuverability and minimal harm. The limits of light penetration depth and elusiveness of photosensitizer utilization, however, impede the implementation of the photodiagnostic and -therapy for determining and annihilating the deep-situated tumor. Herein, a promising strategy that harnesses functional optical fibers is developed and demonstrated to realize an in vivo endoscopic cancer sensing and therapy ensemble. Tumor detection is investigated using hypoxia-sensitive fluorescent fibers to realize fast and accurate tumor recognition and diagnosis. The tumor treatment is further performed by exploiting the endogenous photothermal effect of rare-earth-doped optical fibers. The eradication of orthotopic and subcutaneous xenografts significantly validates the availability of tumoricidal fibers. The strategy opens horizons to inspire the design of optical fiber-mediated "plug and play" precise tumor theranostics with high safety, which may intrigue broader fields, such as fiber optics, materials, chemistry, medicine, and clinics.

Single molecule detection; from microscopy to sensors

Single molecule detection is necessary to find out physical, chemical properties and their mechanism involved in the normal functioning of body cells. In this way, they can provide a new direction to the healthcare system. Various techniques have been developed and employed for their successful detection. Herein, we have emphasized various traditional methods as well as biosensing technology which offer single molecule sensitivity. The various methods including plasmonic resonance, nanopores, whispering gallery mode, Simoa assay and recognition tunneling are discussed in the initial part which has been followed by a discussion about biosensor-based detection. Plasmonic, SERS, CRISPR/Cas, and other types of biosensors are focused in this review and found to be highly sensitive for single molecule detection. This review provides an overview of progression in different techniques employed for single molecule detection.

Single-molecule optofluidic microsensor with interface whispering gallery modes

Optical microresonators have emerged as promising platforms for label-free detection of molecules. However, approaching optimum sensitivity is hindered due to the weak tail of evanescent fields. Here, we report the implementation of the interface modes for ultrasensitive sensing in a microbubble resonator. With the electromagnetic field peaked at the interface between the optical resonator and the analyte solution, interface modes enable sensing of biomolecules with a detection limit of 0.3 pg/cm². Single-molecule detection is further demonstrated using the plasmonic-enhanced interface modes. In addition, intrinsically integrated into a microfluidic channel, the sensor exhibits ultrasmall sample consumption down to 10 pL, providing an automatic platform for biomedical analysis.

Label-free sensors are highly desirable for biological analysis and early-stage disease diagnosis. Optical evanescent sensors have shown extraordinary ability in label-free detection, but their potentials have not been fully exploited because of the weak evanescent field tails at the sensing surfaces. Here, we report an ultrasensitive optofluidic biosensor with interface whispering gallery modes in a microbubble cavity. The interface modes feature both the peak of electromagnetic-field intensity at the sensing surface and high-Q factors even in a small-sized cavity, enabling a detection limit as low as 0.3 pg/cm². The sample consumption can be pushed down to 10 pL due to the intrinsically integrated microfluidic channel. Furthermore, detection of single DNA with 8 kDa molecular weight is realized by the plasmonic-enhanced interface mode.

2D Material-Based Optical Biosensor: Status and Prospect

The combination of 2D materials and optical biosensors has become a hot research topic in recent years. Graphene, transition metal dichalcogenides, black phosphorus, MXenes, and other 2D materials (metal oxides and degenerate semiconductors) have unique optical properties and play a unique role in the detection of different biomolecules. Through the modification of 2D materials, optical biosensor has the advantages that traditional sensors (such as electrical sensing) do not have, and the sensitivity and detection limit are greatly improved. Here, optical biosensors based on different 2D materials are reviewed. First, various detection methods of biomolecules, including surface plasmon resonance (SPR), fluorescence resonance energy transfer (FRET), and evanescent wave and properties, preparation and integration strategies of 2D material, are introduced in detail. Second, various biosensors based on 2D materials are summarized. Furthermore, the applications of these optical biosensors in biological imaging, food safety, pollution prevention/control, and biological medicine are discussed. Finally, the future development of optical biosensors is prospected. It is believed that with their in-depth research in the laboratory, optical biosensors will gradually become commercialized and improve people's quality of life in many aspects.

Printed Nanochain-Based Colorimetric Assay for Quantitative Virus Detection

Fast and ultrasensitive detection of pathogens is very important for efficient monitoring and prevention of viral infections. Here, we demonstrate a label-free optical detection approach that uses a printed nanochain assay for colorimetric quantitative testing of viruses. The antibody-modified nanochains have high activity and specificity which can rapidly identify target viruses directly from biofluids in 15 min, as well as differentiate their subtypes. Arising from the resonance induced near-field enhancement, the color of nanochains changes with the binding of viruses that are easily observed by a smartphone. We achieve the detection limit of 1 PFU μL^-1 through optimizing the optical response of nanochains in visible region. Besides, it allows for real-time response to virus concentrations ranging from 0 to 1.0×10⁵  PFU mL^-1 . This low-cost and portable platform is also applicable to rapid detection of other biomarkers, making it attractive for many clinical applications.

TiO2 supported single Ag atoms nanozyme for elimination of SARS-CoV2

The outbreak of SARS-coronavirus 2 (SARS-CoV2) has become a global health emergency. Although enormous efforts have been made, there is still no effective treatment against the new virus. Herein, a TiO₂ supported single-atom nanozyme containing atomically dispersed Ag atoms (Ag-TiO₂ SAN) is designed to serve as a highly efficient antiviral nanomaterial. Compared with traditional nano-TiO₂ and Ag, Ag-TiO₂ SAN exhibits higher adsorption (99.65%) of SARS-CoV2 pseudovirus. This adsorption ability is due to the interaction between SAN and receptor binding domain (RBD) of spike 1 protein of SARS-CoV2. Theoretical calculation and experimental evidences indicate that the Ag atoms of SAN strongly bind to cysteine and asparagine, which are the most abundant amino acids on the surface of spike 1 RBD. After binding to the virus, the SAN/virus complex is typically phagocytosed by macrophages and colocalized with lysosomes. Interestingly, Ag-TiO₂ SAN possesses high peroxidase-like activity responsible for reactive oxygen species production under acid conditions. The highly acidic microenvironment of lysosomes could favor oxygen reduction reaction process to eliminate the virus. With hACE2 transgenic mice, Ag-TiO₂ SAN showed efficient anti-SARS-CoV2 pseudovirus activity. In conclusion, Ag-TiO₂ SAN is a promising nanomaterial to achieve effective antiviral effects for SARS-CoV2.

Specific Screening of Prostate Cancer Individuals Using an Enzyme-Assisted Substrate Sensing Platform Based on Hierarchical MOFs with Tunable Mesopore Size

Rapid and specific identification of tumor metabolic markers is of great significance. Herein, a convenient, reliable and specific strategy was proposed to screen prostate cancer (PCa) individuals through indirectly quantifying sarcosine, an early indicator of PCa, in the clinical urine samples. The success roots in the rational design of a cascade response model, which takes integrated sarcosine oxidase (SOX) as a specific recognition unit and oxygen-sensitive molecule as a signal reporter. The newly developed hierarchical mesoporous Zr-based metal-organic frameworks with continuously tunable mesopore size ensure the synergetic work of the SOX and response unit spatially separated in their neighboring mesoporous and microporous domains, respectively. The large mesopore up to 12.1 nm not only greatly enhances the loading capacity of SOX but also spares enough space for the free diffusion of sarcosine. On this basis, the probe is competent to specifically check out the tiny concentration change of sarcosine in the urine sample between PCa patients and healthy humans. Such a concept of enzyme-assisted substrate sensing could be simply extended by altering the type of immobilized enzymes, hopefully setting a guideline for the rational design of multiple probes to quantify specific biomarkers in complex biological samples.

Intelligent phototriggered nanoparticles induce a domino effect for multimodal tumor therapy

Rationale: Integration of several monotherapies into a single nanosystem can produce remarkable synergistic antitumor effects compared with separate delivery of combination therapies. We developed near-infrared (NIR) light-triggered nanoparticles that induce a domino effect for multimodal tumor therapy. Methods: The designed intelligent phototriggered nanoparticles (IPNs) were composed of a copper sulfide-loaded upconversion nanoparticle core, a thermosensitive and photosensitive enaminitrile molecule (EM) organogel shell loaded with anticancer drugs, and a cancer cell membrane coating. Irradiation with an NIR laser activated a domino effect beginning with photothermal generation by copper sulfide for photothermal therapy that also resulted in phase transformation of the EM gel to release the anticancer drug. Meanwhile, the NIR light energy was converted to ultraviolet light by the upconversion core to excite the EM, which generated reactive oxygen species for photodynamic therapy. Results: IPNs achieved excellent antitumor effects in vitro and in vivo with little systemic toxicity, indicating that IPNs could serve as a safe and high-performance instrument for synergetic antitumor therapy. Conclusion: This intelligent drug delivery system induced a chain reaction generating multiple antitumor therapies after a single stimulus.

1/f-noise-free optical sensing with an integrated heterodyne interferometer

Optical evanescent sensors can non-invasively detect unlabeled nanoscale objects in real time with unprecedented sensitivity, enabling a variety of advances in fundamental physics and biological applications. However, the intrinsic low-frequency noise therein with an approximately 1/f-shaped spectral density imposes an ultimate detection limit for monitoring many paramount processes, such as antigen-antibody reactions, cell motions and DNA hybridizations. Here, we propose and demonstrate a 1/f-noise-free optical sensor through an up-converted detection system. Experimentally, in a CMOS-compatible heterodyne interferometer, the sampling noise amplitude is suppressed by two orders of magnitude. It pushes the label-free single-nanoparticle detection limit down to the attogram level without exploiting cavity resonances, plasmonic effects, or surface charges on the analytes. Single polystyrene nanobeads and HIV-1 virus-like particles are detected as a proof-of-concept demonstration for airborne biosensing. Based on integrated waveguide arrays, our devices hold great potentials for multiplexed and rapid sensing of diverse viruses or molecules.

Suppressing 1/f-shaped low-frequency noise is critical but fundamentally challenging to both electrical and optical transducers. Here, the authors demonstrate a 1/f-noise-free optical sensor with integrated CMOS-compatible heterodyne interferometer and an upconversion amplifying technique, which suppresses the noise by two orders of magnitude.

Quantitative analysis of various targets based on aptamer and functionalized Fe3O4@graphene oxide in dairy products using pregnancy test strip and smartphone

Pregnancy test strips are one of the most mature and widely used commercial lateral flow devices used to determine pregnancy. Being a simple and rapid detection method, human chorionic gonadotropin (hCG) was used with different aptamers (hCG-apt) as probes for the detection of metal ions, small organic molecules, and proteins. Quantitative detection of target analytes was achieved using a smartphone app and a portable device developed in our laboratory. The results showed detection ranges of 1 nM-1 μM, 0.1 nM-10 μM and 32 nM-500 nM for Pb²⁺, chloramphenicol, and β-lactoglobulin, respectively, and the corresponding visual detection limits in dairy products were 5 nM, 1 nM and 50 nM, respectively. Based on these results, rapid detection of multiple analytes can be realized through aptamer modification, thereby broadening the application range of commercial lateral flow devices for analysis of food chemistry.

Sensitivity enhancement of a fiber-based interferometric optofluidic sensor

Optofluidic sensors, which tightly bridge photonics and micro/nanofluidics, are superior candidates in point-of-care testing. A fiber-based interferometric optofluidic (FIO) sensor can detect molecular biomarkers by fusing an optical microfiber and a microfluidic tube in parallel. Light from the microfiber side coupled to the microtube leads to lateral localized light-fluid evanescent interaction with analytes, facilitating sensitive detection of biomolecules with good stability and excellent portability. The determination of the sensitivity with respect to the interplay between light and fluidics, however, still needs to be understood quantitatively. Here, we theoretically and experimentally investigate the relationship between refractive index (RI) sensitivity and individual geometrical parameters to determine the lateral localized light-fluid evanescent interaction. Theoretical analysis predicted a sensitive maximum, which could be realized by synergically tuning the fiber diameter d and the tube wall thickness t at an abrupt dispersion transition region. As a result, an extremely high RI sensitivity of 1.6×10⁴ nm/RIU (σ=4074 nm/RIU), an order of magnitude higher than our previous results, with detection limit of 3.0×10^-6 RIU, is recorded by precisely governing the transverse geometry of the setup. The scientific findings will guide future exploration of both new light-fluid interaction devices and biomedical sensors.

De novo design of functional zwitterionic biomimetic material for immunomodulation

Superhydrophilic zwitterionic polymers are a class of nonfouling materials capable of effectively resisting any nonspecific interactions with biological systems. We designed here a functional zwitterionic polymer that achieves a trade-off between nonspecific interactions providing the nonfouling property and a specific interaction for bioactive functionality. Built from phosphoserine, an immune-signaling molecule in nature, this zwitterionic polymer exhibits both nonfouling and immunomodulatory properties. Its conjugation to uricase is shown to proactively eradicate all unwanted immune response, outperforming the zwitterionic polymers. On the other hand, this polymer could significantly prolong the half-life of protein drugs in vivo, overcoming the innate drawback of phosphoserine in inducing accelerated clearance. Our demonstration of a nonfouling zwitterionic material with built-in immunomodulatory functionality provides new insights into the fundamental design of biomaterials, as well as far-reaching implications for broad applications such as drug delivery, implants, and cell therapy.