Light-driven, heterogeneous organocatalysts for C-C bond formation toward valuable perfluoroalkylated intermediates

Impact of quantum size effects to the band gap of catalytic materials: a computational perspective

The evolution of nanotechnology has facilitated the development of catalytic materials with controllable composition and size, reaching the sub-nanometer limit. Nowadays, a viable strategy for tailoring and optimizing the catalytic activity involves controlling the size of the catalyst. This strategy is underpinned by the fact that the properties and reactivity of objects with dimensions on the order of nanometers can differ from those of the corresponding bulk material, due to the emergence of quantum size effects. Quantum size effects have a deep influence on the band gap of semiconducting catalytic materials. Computational studies are valuable for predicting and estimating the impact of quantum size effects. This perspective emphasizes the crucial role of modeling quantum size effects when simulating nanostructured catalytic materials. It provides a comprehensive overview of the fundamental principles governing the physics of quantum confinement in various experimentally observable nanostructures. Furthermore, this work may serve as a tutorial for modeling the electronic gap of simple nanostructures, highlighting that when working at the nanoscale, the finite dimensions of the material lead to an increase of the band gap because of the emergence of quantum confinement. This aspect is sometimes overlooked in computational chemistry studies focused on surfaces and nanostructures.

Diastereoselective dearomatization of indoles via photocatalytic hydroboration on hydramine-functionalized carbon nitride

A protocol for trans-hydroboration of indole derivatives using heterogeneous photocatalysis with NHC-borane has been developed, addressing a persistent challenge in organic synthesis. The protocol, leveraging high crystalline vacancy-engineered polymeric carbon nitride as a catalyst, enables diastereoselective synthesis, expanding substrate scope and complementing existing methods. The approach emphasizes eco-friendliness, cost-effectiveness, and scalability, making it suitable for industrial applications, particularly in renewable energy contexts. The catalyst's superior performance, attributed to its rich carbon-vacancies and well-ordered structure, surpasses more expensive homogeneous alternatives, enhancing viability for large-scale use. This innovation holds promise for synthesizing bioactive compounds and materials relevant to medicinal chemistry and beyond.

Heterogeneous Organocatalysts for Light-Driven Reactions in Continuous Flow

Within the realm of organic synthesis, photocatalysis has blossomed since the beginning of the last decade. A plethora of classical reactivities, such as selective oxidation of alcohol and amines, redox radical formation of reactive species in situ, and indirect activation of an organic substrate for cycloaddition by EnT, have been revised in a milder and more sustainable fashion via photocatalysis. However, even though the spark of creativity leads scientists to explore new reactions and reactivities, the urgency of replacing the toxic and critical metals that are involved as catalysts has encouraged chemists to find alternatives in the branch of science called organocatalysis. Unfortunately, replacing metal catalysts with organic analogues can be too expensive sometimes; however, this drawback can be solved by the reutilization of the catalyst if it is heterogeneous. The aim of this review is to present the recent works in the field of heterogeneous photocatalysis, applied to organic synthesis, enabled by continuous flow. In detail, among the heterogeneous catalysts, g-CN, polymeric photoactive materials, and supported molecular catalysts have been discussed within their specific sections, rather than focusing on the types of reactions.

Review and Theoretical Analysis of Fluorinated Radicals in Direct CAr-H Functionalization of (Hetero)arenes

We highlight key contributions in the field of direct radical CAr- H (hetero)aromatic functionalization involving fluorinated radicals. A compilation of Functional Group Transfer Reagents and their diverse activation mechanisms leading to the release of radicals are discussed. The substrate scope for each radical is analyzed and classified into three categories according to the electronic properties of the substrates. Density functional theory computational analysis provides insights into the chemical reactivity of several fluorinated radicals through their electrophilicity and nucleophilicity parameters. Theoretical analysis of their reduction potentials also highlights the remarkable correlation between electrophilicity and oxidizing ability. It is also established that highly fluorinated radicals (e.g. ⋅OCF3) are capable of engaging in single-electron transfer (SET) processes rather than radical addition, which is in good agreement with experimental literature data. A reactivity scale, based on activation barrier of addition of these radicals to benzene is also elaborated using the high accuracy DLPNO-(U)CCSD(T) method.

Nanostructured electrocatalysts for organic synthetic transformations

Organic chemists have made and are still making enormous efforts toward the development of novel green catalytic synthesis. The necessity arises from the imperative of safeguarding human health and the environment, while ensuring efficient and sustainable chemical production. Within this context, electrocatalysis provides a framework for the design of new organic reactions under mild conditions. Undoubtedly, nanostructured materials are under the spotlight as the most popular and in most cases efficient platforms for advanced organic electrosynthesis. This Minireview focuses on the recent developments in the use of nanostructured electrocatalysts, highlighting the correlation between their chemical structures and resulting catalytic abilities, and pointing to future perspectives for their application in cutting-edge areas.

Electrochemical impedance spectroscopy, another arrow in the arsenal to study the biodegradability of two-dimensional materials

Carbon nitride (C3N4) is an innovative material with a high potential in many applications including energy storage, catalysis, composites, and biomedicine. C3N4 appears remarkably interesting not only for its properties but also because its simple preparation routes involve low-cost starting materials and reagents. However, there is still a lack of information on its degradability. For this reason, in this study, we evaluate the environmental persistence of C3N4 and its oxidized form by applying the photo-Fenton reaction. The morphological and structural changes of both materials were monitored by transmission electron microscopy and Raman spectroscopy respectively. In addition, electrochemical impedance spectroscopy has been used as an original technique to validate the degradation process of C3N4.

Singlet-Triplet Energy Inversion in Carbon Nitride Photocatalysts

Time-resolved EPR (TR-EPR) demonstrates the formation of well-defined spin triplet excitons in carbon nitride. This permits to experimentally probe the extent of the triplet wavefunction which delocalizes over several tri-s-triazine units. Analysis of the temperature dependence of the TR-EPR signal reveals the mobility of the triplet excitons. By employing monochromatic light excitation in the range 430-600 nm, the energy of the spin triplet is estimated to be ≈0.2 eV above the conduction band edge, proving that the triplet exciton lies above the corresponding singlet. Comparison between amorphous and graphitic forms establishes the singlet-triplet inversion as a general feature of carbon nitride materials.

Multifunctional carbon nitride nanoarchitectures for catalysis

Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated.

Graphitic Carbon Nitride as Photocatalyst for the Direct Formylation of Anilines

The use of graphitic carbon nitride (g-CN) for the photocatalytic radical formylation of anilines, which represents a more sustainable and attractive alternative to the currently used approaches, is reported herein. Our operationally simple method occurs under mild conditions, employing air as an oxidant. In particular, the chemistry is driven by the ability of g-CN to reach an electronically excited state upon visible-light absorption, which has a suitable potential energy to trigger the formation of reactive α-amino radical species from anilines. Mechanistic investigations also proved the key role of the g-CN to form reactive superoxide radicals from O2 via single electron transfer. Importantly, this photocatalytic transformation provides a variety of functionalized formamides (15 examples, up to 89 % yield).

Carbon Vacancies Steer the Activity in Dual Ni Carbon Nitride Photocatalysis

The manipulation of carbon nitride (CN) structures is one main avenue to enhance the activity of CN-based photocatalysts. Increasing the efficiency of photocatalytic heterogeneous materials is a critical step toward the realistic implementation of sustainable schemes for organic synthesis. However, limited knowledge of the structure/activity relationship in relation to subtle structural variations prevents a fully rational design of new photocatalytic materials, limiting practical applications. Here, the CN structure is engineered by means of a microwave treatment, and the structure of the material is shaped around its suitable functionality for Ni dual photocatalysis, with a resulting boosting of the reaction efficiency toward many CX (X = N, S, O) couplings. The combination of advanced characterization techniques and first-principle simulations reveals that this enhanced reactivity is due to the formation of carbon vacancies that evolve into triazole and imine N species able to suitably bind Ni complexes and harness highly efficient dual catalysis. The cost-effective microwave treatment proposed here appears as a versatile and sustainable approach to the design of CN-based photocatalysts for a wide range of industrially relevant organic synthetic reactions.

Humin Formation on SBA-15-pr-SO3H Catalysts during the Alcoholysis of Furfuryl Alcohol to Ethyl Levulinate: Effect of Pore Size on Catalyst Stability, Transport, and Adsorption

Herein, the alcoholysis of furfuryl alcohol in a series of SBA-15-pr-SO₃H catalysts with different pore sizes is reported. Elemental analysis and NMR relaxation/diffusion methods show that changes in pore size have a significant effect on catalyst activity and durability. In particular, the decrease in catalyst activity after catalyst reuse is mainly due to carbonaceous deposition, whereas leaching of sulfonic acid groups is not significant. This effect is more pronounced in the largest-pore-size catalyst C3, which rapidly deactivates after one reaction cycle, whereas catalysts with a relatively medium and small average pore size (named, respectively, C2 and C1) deactivate after two reaction cycles and to a lesser extent. CHNS elemental analysis showed that C1 and C3 experience a similar amount of carbonaceous deposition, suggesting that the increased reusability of the small-pore-size catalyst can be attributed to the presence of SO₃H groups mostly present on the external surface, as corroborated by results on pore clogging obtained by NMR relaxation measurements. The increased reusability of the C2 catalyst is attributed to a lower amount of humin being formed and, at the same time, reduced pore clogging, which helps to maintain accessible the internal pore space.

MOF-Derived Defective Co3O4 Nanosheets in Carbon Nitride Nanocomposites for CO2 Photoreduction and H2 Production

In photocatalysis, especially in CO₂ reduction and H₂ production, the development of multicomponent nanomaterials provides great opportunities to tune many critical parameters toward increased activity. This work reports the development of tunable organic/inorganic heterojunctions comprised of cobalt oxides (Co₃O₄) of varying morphology and modified carbon nitride (CN), targeting on optimizing their response under UV-visible irradiation. MOF structures were used as precursors for the synthesis of Co₃O₄. A facile solvothermal approach allowed the development of ultrathin two-dimensional (2D) Co₃O₄ nanosheets (Co₃O₄-NS). The optimized CN and Co₃O₄ structures were coupled forming heterojunctions, and the content of each part was optimized. Activity was significantly improved in the nanocomposites bearing Co₃O₄-NS compared with the corresponding bulk Co₃O₄/CN composites. Transient absorption spectroscopy revealed a 100-fold increase in charge carrier lifetime on Co₃O₄-NS sites in the composite compared with the bare Co₃O₄-NS. The improved photocatalytic activity in H₂ production and CO₂ reduction is linked with (a) the larger interface imposed from the matching 2D structure of Co₃O₄-NS and the planar surface of CN, (b) improvements in charge carrier lifetime, and (c) the enhanced CO₂ adsorption. The study highlights the importance of MOF structures used as precursors in forming advanced materials and the stepwise functionalization of the individual parts in nanocomposites for the development of materials with superior activity.

Morphology and Light-Dependent Spatial Distribution of Spin Defects in Carbon Nitride

Carbon nitride (CN) is a heterogeneous photocatalyst that combines good structural properties and a broad scope. The photocatalytic efficiency of CN is associated with the presence of defective and radical species. An accurate description of defective states-both at a local and extended level-is key to develop a thorough mechanistic understanding of the photophysics of CN. In turn, this will maximise the generation and usage of photogenerated charge carriers and minimise wasteful charge recombination. Here the influence of morphology and light-excitation on the number and chemical nature of radical defects is assessed. By exploiting the magnetic dipole-dipole coupling, the spatial distribution of native radicals in CN is derived with high precision. From the analysis an average distance in the range 1.99-2.34 nm is determined, which corresponds to pairs of radicals located approximately four tri-s-triazine units apart.

Segmented Structure Design of Carbon Ring In-Plane Embedded in g-C3 N4 Nanotubes for Ultra-High Hydrogen Production

The photocatalytic water splitting capability of metal-free graphitic carbon nitride (g-C₃ N₄ ) photocatalyst is determined by its microstructure and photoexcited electrons transfer. Herein, a segmented structure was developed, consisting of alternant g-C₃ N₄ nanotubes and graphitic carbon rings (denoted as C_r -CN-NT). The C_r -CN-NT showed ordered structure and ultralong length/diameter ratio of 150 nm in diameter and a few microns in lengths, which promoted electron transport kinetics and elongated photocarrier diffusion length and lifetime. Meanwhile, the local in-plane π-conjugation was formed and extended in C_r -CN-NT, which could improve charge carrier density and prohibit electron-hole recombination. Accordingly, the average hydrogen evolution rate of C_r -CN-NT reached 9245 μmol h^-1  g^-1 , which was 61.6 times that of pristine CN, and the remarkable apparent quantum efficiency (AQE) of C_r -CN-NT reached up to 12.86 % at 420 nm. This work may provide a pathway for simultaneous morphology regulation and in-plane modification of high-performance photocatalysts.

Edge modification facilitated heterogenization and exfoliation of two-dimensional nanomaterials for cancer catalytic therapy

The rapid recombination of electron-hole pairs and limited substrates are the most critical factors astricting the effect of catalytic therapy. Thus, two-dimensional interplanar heterojunction (BiOCl/Bi₂O₃) that prolongs the lifetime of excited electrons and holes and extends the selectivity of substrates under ultrasound irradiation is prepared to facilitate high-performance cancer therapy. An edge modification displacing marginal BiOCl to Bi₂O₃ is proposed to construct the interplanar heterojunction, promoting ultrathin nanosheets exfoliation due to the enhanced edge affinity with H₂O. The spontaneously aligning Fermi levels mediate a built-in electric field-guided Z-scheme interplanar heterojunction, retard electron-hole pairs recombination, and improve redox potentials. Hence, these high-powered electrons and holes are capable of catalyzing diverse and stable substrates, such as the reduction reactions, O₂ → ·O₂^- and CO₂ → CO, and oxidation reactions, GSH → GSSG and H₂O → ·OH. The Z-scheme interplanar heterojunction with the extending substrates selectivity completely breaks the tumor microenvironment limitation, exhibiting high anticancer activity.

The Nickel Age in Synthetic Dual Photocatalysis: A Bright Trip Toward Materials Science

Recently, the field of dual photocatalysis has grown rapidly, to become one of the most powerful tools for the functionalization of organic molecules under mild conditions. In particular, the merging of Earth-abundant nickel-based catalytic systems with visible-light-activated photoredox catalysts has allowed the development of a number of unique green synthetic approaches. This goes in the direction of ensuring an effective and sustainable chemical production, while safeguarding human health and environment. Importantly, this relatively new branch of catalysis has inspired an interdisciplinary stream of research that spans from inorganic and organic chemistry to materials science, thus establishing itself as one dominant trend in modern organic synthesis. This Review aims at illustrating the milestones on the timeline evolution of the photocatalytic systems used, with a critical analysis toward novel applications based on the use of photoactive two-dimensional carbon-based nanostructures. Lastly, forward-looking opportunities within this intriguing research field are discussed.

An Integrated Carbon Nitride-Nickel Photocatalyst for the Amination of Aryl Halides Using Sodium Azide

The synthesis of primary anilines via sustainable methods remains a challenge in organic synthesis. We report a photocatalytic protocol for the selective synthesis of primary anilines via cross‐coupling of a wide range of aryl/heteroaryl halides with sodium azide using a photocatalyst powder consisting of nickel(II) deposited on mesoporous carbon nitride (Ni‐mpg‐CN_x). This heterogeneous photocatalyst contains a high surface area with a visible light‐absorbing and adaptive “built‐in” solid‐state ligand for the integrated catalytic Ni site. The method displays a high functional group tolerance, requires mild reaction conditions, and benefits from easy recovery and reuse of the photocatalyst powder. Thereby, it overcomes the need of complex ligand scaffolds required in homogeneous catalysis, precious metals and elevated temperatures/pressures in existing protocols of primary anilines synthesis. The reported heterogeneous Ni‐mpg‐CN_x holds potential for applications in the academic and industrial synthesis of anilines and exploration of other photocatalytic transformations.

Photocatalytic Abstraction of Hydrogen Atoms from Water Using Hydroxylated Graphitic Carbon Nitride for Hydrogenative Coupling Reactions

Employing pure water, the ultimate green source of hydrogen donor to initiate chemical reactions that involve a hydrogen atom transfer (HAT) step is fascinating but challenging due to its large H−O bond dissociation energy (BDE_H‐O=5.1 eV). Many approaches have been explored to stimulate water for hydrogenative reactions, but the efficiency and productivity still require significant enhancement. Here, we show that the surface hydroxylated graphitic carbon nitride (gCN−OH) only requires 2.25 eV to activate H−O bonds in water, enabling abstraction of hydrogen atoms via dehydrogenation of pure water into hydrogen peroxide under visible light irradiation. The gCN−OH presents a stable catalytic performance for hydrogenative N−N coupling, pinacol‐type coupling and dehalogenative C−C coupling, all with high yield and efficiency, even under solar radiation, featuring extensive impacts in using renewable energy for a cleaner process in dye, electronic, and pharmaceutical industries.

Photoredox Cross-Dehydrogenative Coupling of N-Aryl Glycines Mediated by Mesoporous Graphitic Carbon Nitride: An Environmentally Friendly Approach to the Synthesis of Non-Proteinogenic α-Amino Acids (NPAAs) Decorated with Indoles

Indole-decorated glycine derivatives are prepared through an environmentally benign cross-dehydrogenative coupling between N-aryl glycine analogues and indoles (yield of ≤81%). Merging heterogeneous organocatalysis and photocatalysis, C–H functionalization has been achieved by selective C-2 oxidation of N-aryl glycines to afford the electrophilic imine followed by Friedel–Crafts alkylation with indole. The sustainability of the process has been taken into account in the reaction design through the implementation of a metal-free recyclable heterogeneous photocatalyst and a green reaction medium. Scale-up of the benchmark reaction (gram scale, yield of 69%) and recycling experiments (over seven runs without a loss of efficiency) have been performed to prove the robustness of the protocol. Finally, mechanistic studies were conducted employing electron paramagnetic resonance spectroscopy to unveil the roles of the photocatalyst and oxygen in the formation of odd-electron species.

Progress in Development of Photocatalytic Processes for Synthesis of Fuels and Organic Compounds under Outdoor Solar Light

With photovoltaics becoming a mature, commercially feasible technology, society is willing to allocate resources for developing and deploying new technologies based on using solar light. Analysis of projects supported by the European Commission in the past decade indicates exponential growth of funding to photocatalytic (PC) and photoelectrocatalytic (PEC) technologies that aim either at technology readiness levels (TRLs) TRL 1-3 or TRL > 3, with more than 75 Mio€ allocated from the year 2019 onward. This review provides a summary of PC and PEC processes for the synthesis of bulk commodities such as solvents and fuels, as well as chemicals for niche applications. An overview of photoreactors for photocatalysis on a larger scale is provided. The review rounds off with the summary of reactions performed at lab scale under natural outdoor solar light to illustrate conceptual opportunities offered by solar-driven chemistry beyond the reduction of CO₂ and water splitting. The authors offer their vision of the impact of this area of research on society and the economy.

Insight into morphology dependent charge carrier dynamics in ZnSe-CdS nanoheterostructures

Semiconductor nanoheterostructures (NHSs) are being increasingly used for the photocatalytic conversion of solar energy in which photo-induced charge separation is an essential step and hence it is necessary to understand the effect of various factors such as size, shape, and composition on the charge transfer dynamics. Ultrafast transient absorption spectroscopy is used to investigate the nature and dynamics of photo-induced charge transfer processes in ZnSe-CdS NHSs of different morphologies such as nanospheres (NSs), nanorods (NRs), and nanoplates (NPs). It demonstrates the fast separation of charge carriers and localization of both charges in adjacent semiconductors, resulting in the formation of a charge-separated (CS) state. The lifetime of the charge-separated state follows the order of NSs < NPs < NRs, emphasizing the effect of morphology on the enhancement of photo-induced charge separation and suppression of backward recombination. The separated charge carriers have been utilized in visible light driven hydrogen production and the hydrogen generation activity follows the same order as that for the lifetime of the CS state, underlining the role of charge separation efficiency. Therefore, the variation of the morphology of NHSs plays a significant role in their charge carrier dynamics and hence the photocatalytic hydrogen production activity.

NMR relaxation time measurements of solvent effects in an organocatalysed asymmetric aldol reaction over silica SBA-15 supported proline

The behaviour of solvents in solid-supported proline organocatalysts is explored using NMR relaxation measurements coupled with reaction screening. Solvents with a lower affinity for the solid surface lead to a higher reactivity.

Radical defects modulate the photocatalytic response in 2D-graphitic carbon nitride

Graphitic carbon nitride (gCN) is an important heterogeneous metal-free catalytic material. Thermally induced post-synthetic modifications, such as amorphization and/or reduction, were recently used to enhance the photocatalytic response of these materials for certain classes of organic transformations, with structural defects possibly playing an important role. The knowledge of how these surface modifications modulate the photocatalytic response of gCN is therefore not only interesting from a fundamental point of view, but also necessary for the development and/or tuning of metal-free gCN systems with superior photo-catalytic properties. Herein, employing density functional theory calculations and combining both the periodic and molecular approaches, in conjunction with experimental EPR measurements, we demonstrate that different structural defects on the gCN surface generate distinctive radical defect states localized within the electronic bandgap, with only those correlated with amorphous and reduced gCN structures being photo-active. To this end, we (i) model defective gCN surfaces containing radical defect states; (ii) assess the interactions of these defects with the radical precursors involved in the photo-driven alkylation of electron-rich aromatic compounds (namely perfluoroalkyl iodides); and (iii) describe the photo-chemical processes triggering the initial step of that reaction at the gCN surface. We provide a coherent structure/photo-catalytic property relationship on defective gCN surfaces, elaborating how only specific defect types act as binding sites for the perfluoroalkyl iodide reagent and can favor a photo-induced charge transfer from the gCN surface to the molecule, thus triggering the perfluoroalkylation reaction.

The nature of radical defects governs the photocatalytic activity of graphitic carbon nitride.

The Role of Structured Carbon in Downsized Transition Metal-Based Electrocatalysts toward a Green Nitrogen Fixation

Electrocatalytic Nitrogen Reduction Reaction (NRR) to ammonia is one of the most recent trends of research in heterogeneous catalysis for sustainability. The stark challenges posed by the NRR arise from many factors, beyond the strongly unfavored thermodynamics. The design of efficient heterogeneous electrocatalysts must rely on a suitable interplay of different components, so that the majority of research is focusing on development of nanohybrids or nanocomposites that synergistically harness the NRR sequence. Nanostructured carbon is one of the most versatile and powerful conductive supports that can be combined with metal species in an opportune manner, so as to guide the correct proceeding of the reaction and boost the catalytic activity.

Low-Field Functional Group Resolved Nuclear Spin Relaxation in Mesoporous Silica

Solid-fluid interactions underpin the efficacy of functional porous materials across a diverse array of chemical reaction and separation processes. However, detailed characterization of interfacial phenomena within such systems is hampered by their optically opaque nature. Motivated by the need to bridge this capability gap, we report low-magnetic-field two-dimensional (2D) ¹H nuclear spin relaxation measurements as a noninvasive probe of adsorbate identity and interfacial dynamics, exploring the relaxation characteristics exhibited by liquid hydrocarbon adsorbates confined to a model mesoporous silica. For the first time, we demonstrate the capacity of this approach in distinguishing functional group-specific relaxation phenomena across a diverse range of alcohols and carboxylic acids employed as solvents, reagents, and liquid hydrogen carriers, with distinct relaxation responses assigned to the alkyl and hydroxyl moieties of each confined liquid. Uniquely, this relaxation behavior is shown to correlate with adsorbate acidity, with the observed relationship rationalized on the basis of surface-adsorbate proton-exchange dynamics. Our results demonstrate that nuclear spin relaxation provides a molecular-level perspective on sorbent/sorbate interactions, motivating the exploration of such measurements as a unique probe of adsorbate identity within optically opaque porous media.

Metal-Free Photocatalysis: Two-Dimensional Nanomaterial Connection toward Advanced Organic Synthesis

Two-dimensional (2D) nanostructures are a frontier in materials chemistry as a result of their extraordinary properties. Metal-free 2D nanomaterials possess extra appeal due to their improved cost-effectiveness and lower toxicity with respect to many inorganic structures. The outstanding electronic characteristics of some metal-free 2D semiconductors have projected them into the world of organic synthesis, where they can function as high-performance photocatalysts to drive the sustainable synthesis of high-value organic molecules. Recent reports on this topic have inspired a stream of research and opened up a theme that we believe will become one of the most dominant trends in the forthcoming years.

Concluding remarks: Chemistry of 2-dimensional materials: beyond graphene

Since graphene was exfoliated in 2004, two-dimensional (2D) materials have received great attention due to their physical and chemical properties associated with their nanosized thickness and the correlated quantum size effect. 2D planes allow the confinement of charge carriers, heat, and photons, leading to the remarkable electronic and optical properties of these materials. The Faraday Discussion"Chemistry of 2-dimensional materials: beyond graphene" has been an incredible showcase for a variety of highly interesting contributions in the field. This conference comprised a large number of aspects of the topic: from their synthesis and the study of their optical and physical properties to their numerous applications. These concluding remarks aim to capture the recent developments in 2D materials chemistry and physics that were presented and debated during this Faraday Discussion, and more generally in the research field in recent years. Particular attention will be paid to aspects like the synthesis of the materials, their toxicity and biodegradation, and some of their major applications in catalysis, as well as Li-ion batteries, water filtration and sensing. In addition we aim to highlight future challenges that still need to be addressed.