An enzyme-mimic single Fe-N3 atom catalyst for the oxidative synthesis of nitriles via C─C bond cleavage strategy

Tailoring catalysis at the atomic level: trends and breakthroughs in single atom catalysts for organic transformation reactions

The utilization of precise materials in heterogeneous catalysis will provide various new possibilities for developing superior catalysts to tackle worldwide energy and environmental issues. In recent years, single atom catalysts (SACs) with excellent atom utilization and isolated active sites have progressed dramatically as a thriving sector of catalysis research. Additionally, SACs bridge the gap between homogeneous and heterogeneous catalysts and overcome the limitations of both categories. Current research on SACs is highly oriented towards the organic synthesis of high-significance molecules with promising potential for large-scale applicability and industrialization. In this context, this review aims to comprehensively analyze the state-of-the-art research in the synthesis of SACs and analyze their structural, electronic, and geometric properties. Moreover, the unprecedented catalytic performance of the SACs towards various organic transformation reactions is succinctly summarized with recent reports. Further, a detailed summary of the current state of the research field of SACs in organic transformation is discussed. Finally, a critical analysis of the existing challenges in this emerging field of SACs and the possible countermeasures are provided. We believe that SACs have the potential to profoundly alter the chemical industry, pushing the boundaries of catalysis in new and undiscovered territory.

Visible Light-Switchable Lattice Oxygen Sites for Selective C-H and C(O)-C Bond Electrooxidation

Lattice-oxygen is highly oxidizable, ideal for electrocatalytic C-H oxidation but insufficient alone for C(O)-C bond cleavage due to the non-removable nature of lattice sites. Here, we present a visible light-assisted electrochemical method of in situ formulating removable lattice-oxygen sites in a nickel-oxyhydroxide (ESE-NiOOH) electrocatalyst. This catalyst efficiently converts aromatic alcohols and carbonyls with C(O)-C fragments from lignin and plastics into benzoic acids (BAs) with high yields (83-99 %). Without light irradiation, ESE-NiOOH's intrinsic lattice-oxygen is non-removable and inert for C(O)-C bond cleavage. In situ characterizations show light-induced lattice-oxygen removal and regeneration via OH- refilling. Theoretical calculations identify the nucleophilic oxygen attack on ketone-derived carbanion as a rate-determining step, which can be remarkably facilitated by removable lattice-oxygen to activate α-C-H bonds. As a proof-of-concept, an "electrochemical funnel" strategy is developed for high-efficiency upgrading aromatic mixtures with C(O)-C moieties into BA with up to 94 % yield. This in situ removal-regeneration approach for lattice sites opens an avenue for the tailored design of interfacial electrocatalysts to selectively upcycle waste carbon sources into valuable products.

Study on the Electrochemiluminescence Emission Mechanism of HOF-14 and Its Multimode Sensing and Imaging Application

A novel hydrogen-bonded organic framework (HOF-14) has attracted much attention due to its excellent biocompatibility and low toxicity, but its research in the electrochemiluminescence (ECL) field has not been reported. In this work, the annihilation-type and coreactant-type ECL emission mechanisms of HOF-14 were studied systematically for the first time. It was found that the ECL quantum efficiency of HOF-14/TEA coreactant system was the highest, which was 1.82 times that of Ru(bpy)32+/TEA. Further, the ECL emission intensity of HOF-14/TEA system could achieve colorimetric (CL) imaging of mobile phone. We also discovered that HOF-14 had superior photoelectrochemical (PEC) performance. Based on the above research results, a unique HOF-14-based multimode sensing and imaging platform was constructed. The antibiotic Enrofloxacin (ENR) was selected as the detection target, and the Cu-Zn bimetallic single-atom nanozyme (Cu-Zn/SAzyme) with excellent peroxidase (POD)-like activity was used to prepare quenching probes. When the target ENR was present, Cu-Zn/SAzyme quenching probes were introduced to the surface of HOF-14 by the dual-aptamer sandwich method. Cu-Zn/SAzyme could catalyze diaminobenzidine (DAB) to produce brown precipitations to quench the ECL, PEC, and CL signals of HOF-14, realizing multimode detection of ENR. This work not only discovered excellent ECL and PEC property of new HOF-14 material but also systematically studied the ECL emission mechanism of HOF-14, and proposed a novel multimode sensing and imaging platform, which greatly improved the detection accuracy of target and showed great contributions to the field of ECL analysis.

Enhancing Zinc-Air Flow Batteries: Single-Atom Catalysis within Cobalt-Encapsulated Carbon Nanotubes for Superior Efficiency

Amid the world's escalating energy needs, rechargeable zinc-air batteries stand out because of their environmental sustainability, with their performance being critically dependent on the oxygen reduction reaction (ORR). The inherent slow kinetics of the ORR at air electrodes frequently constrains their operational efficiency. Here, we develop a new self-catalytic approach for in situ growth of carbon nanotubes with new cathode material Co@CoN3/CNTs-800 without external additives. Density functional theory calculation reveals this method integrates nonprecious single-atom catalysis with spatial confinement, facilitating large-scale, in situ fabrication of CNTs, which can support dispersed atomic CoN3 sites and enforce spatial confinement on Co nanoparticles. The Co@CoN3/CNTs-800 electrode achieves an electron transfer number close to ideal (3.9 out of 4.0). In rechargeable zinc-air flow batteries, it achieves a peak power density of 169.5 mW cm-2 and a voltage gap that is only 1.6% larger than the original after 700 h. This work surmounts critical challenges in the ORR kinetics for zinc-air batteries.

Single-Atom Co-N4 Sites Mediate C=N Formation via Reductive Coupling of Nitroarenes with Alcohols

It remains challenging to construct C=N bonds due to their facile hydrogenation. Herein, a single Co atom catalyst was discovered to be active for the selective construction of C=N bonds toward the synthesis of imines and N-heterocycles via reductive coupling of nitroarenes with various alcohols, including inert aliphatic ones. DFT calculations and experimental data revealed that the transfer hydrogenation proceeded via the intramolecular hydride transfer and the transfer of H from the α-Csp3-H bond to the nitro group was the rate-determining step. The single Co atoms served as a bridge to transfer the electrons from the catalyst to the adsorbed alcohol molecules, resulting in the activation of the α-Csp3-H bond. Unlike metal nanoparticles, the C=N bonds in imine products can be reserved due to the large steric hindrance from substituents on C and N. DFT calculation also confirmed that transfer hydrogenation of the C=N bonds in imines is thermodynamically unfavored with a much higher energy barrier compared with the transfer hydrogenation of the -NO2 group (1.47 vs 1.15 eV).

Regulating Reactive Oxygen Intermediates of Fe-N-C SAzyme via Second-Shell Coordination for Selective Aerobic Oxidation Reactions

Reactive oxygen species (ROS) regulation for single-atom nanozymes (SAzymes), e.g., Fe-N-C, is a key scientific issue that determines the activity, selectivity, and stability of aerobic reaction. However, the poor understanding of ROS formation mechanism on SAzymes greatly hampers their wider deployment. Herein, inspired by cytochromes P450 affording bound ROS intermediates in O2 activation, we report Fe-N-C containing the same FeN4 but with tunable second-shell coordination can effectively regulate ROS production pathways. Remarkably, compared to the control Fe-N-C sample, the second-shell sulfur functionalized Fe-N-C delivered a 2.4-fold increase of oxidase-like activity via the bound Fe=O intermediate. Conversely, free ROS (⋅O2 -) release was significantly reduced after functionalization, down to only 17 % of that observed for Fe-N-C. The detailed characterizations and theoretical calculations revealed that the second-shell sulfur functionalization significantly altered the electronic structure of FeN4 sites, leading to an increase of electron density at Fermi level. It enhanced the electron transfer from active sites to the key intermediate *OOH, thereby ultimately determining the type of ROS in aerobic oxidation process. The proposed Fe-N-Cs with different second-shell anion were further applied to three aerobic oxidation reactions with enhanced activity, selectivity, and stability.

Enable biomass-derived alcohols mediated alkylation and transfer hydrogenation

A single-atom catalyst with generally regarded inert Zn-N4 motifs derived from ZIF-8 is unexpectedly efficient for the activation of alcohols, enabling alcohol-mediated alkylation and transfer hydrogenation. C-alkylation of nitriles, ketones, alcohols, N-heterocycles, amides, keto acids, and esters, and N-alkylation of amines and amides all go smoothly with the developed method. Taking the α-alkylation of nitriles with alcohols as an example, the α-alkylation starts from the (1) nitrogen-doped carbon support catalyzed dehydrogenation of alcohols into aldehydes, which further condensed with nitriles to give vinyl nitriles, followed by (2) transfer hydrogenation of C=C bonds in vinyl nitriles on Zn-N4 sites. The experimental results and DFT calculations reveal that the Lewis acidic Zn-N4 sites promote step (2) by activating the alcohols. This is the first example of highly efficient single-atom catalysts for various organic transformations with biomass-derived alcohols as the alkylating reagents and hydrogen donors.

A Metallomicellar Catalyst for Controlled Oxidation of Alcohols and Lignin Mimics in Water using Open Air as Oxidant

Alcohol groups and β-O-4 (C-C) linkages are widespread in biomass feedstock that are abundant renewable resource for value-added chemicals. The development of sustainable protocols for direct oxidation or oxidative cleavage of feedstock materials in a controlled fashion, using open air as an oxidant is an intellectually stimulating task to produce industrially important value-added carbonyls. Further, the oxidative depolymerization of lignin into fine chemicals has evoked interest in recent times. Herein, we report the first example of a catalyst system that could activate molecular oxygen from atmospheric air for controlled oxidation and oxidative cleavage/depolymerization of feedstock materials such as alcohols, β-O-4 (C-C) linkages and real lignin in water under open air conditions. The selectivity of carbonyl products is controlled by altering the pH between ~7.0 and ~12.0. The current strategy highlights the non-involvement of any external co-catalyst, oxidant, radical additives, and/or destructive organic solvents. The catalyst shows a wide substrate scope and eminent functional group tolerance. The upscaled multigram synthesis using an inexpensive catalyst and easily available oxidant evidences the practical utility of the developed protocol. A plausible mechanism has been proposed with the help of a few controlled experiments, and kinetic and computational studies.

Machine Learning-Assistant Colorimetric Sensor Arrays for Intelligent and Rapid Diagnosis of Urinary Tract Infection

Urinary tract infections (UTIs), which can lead to pyelonephritis, urosepsis, and even death, are among the most prevalent infectious diseases worldwide, with a notable increase in treatment costs due to the emergence of drug-resistant pathogens. Current diagnostic strategies for UTIs, such as urine culture and flow cytometry, require time-consuming protocols and expensive equipment. We present here a machine learning-assisted colorimetric sensor array based on recognition of ligand-functionalized Fe single-atom nanozymes (SANs) for the identification of microorganisms at the order, genus, and species levels. Colorimetric sensor arrays are built from the SAN Fe1-NC functionalized with four types of recognition ligands, generating unique microbial identification fingerprints. By integrating the colorimetric sensor arrays with a trained computational classification model, the platform can identify more than 10 microorganisms in UTI urine samples within 1 h. Diagnostic accuracy of up to 97% was achieved in 60 UTI clinical samples, holding great potential for translation into clinical practice applications.

Lewis Acid-Promoted Oxidative Cleavage of Carbon-Carbon Bonds: Synthesis of N-Arylated Lactam-Type Iminosugars

In this paper, a mild strategy for the oxidative cleavage of carbon-carbon bonds catalyzed by Lewis acid was developed in air condition at room temperature. Under such conditions, the bis-carbonyl compounds 3 were directly afforded from the reaction of D-ribose tosylate 1 and aniline in excellent yields through the oxidative cleavage of the key intermediate iminium-ion A and its tautomer enamine B. A series of N-arylated lactam-type iminosugars 5 were then successfully obtained by removing the isopropylidene group from 3 with the aid of the condensation agent DCC. Additionally, reduction of A and the removal of the isopropylidene group could provide N-arylated iminosugars 4. This strategy enables the oxidative cleavage of carbon-carbon bonds under mild conditions and facilitates the synthesis of the novel iminosugars with potent biological activity.

Direct C-C Double Bond Cleavage of Alkenes Enabled by Highly Dispersed Cobalt Catalyst and Hydroxylamine

The utilization of a single-atom catalyst to break C-C bonds merges the merits of homogeneous and heterogeneous catalysis and presents an intriguing pathway for obtaining high-value-added products. Herein, a mild, selective, and sustainable oxidative cleavage of alkene to form oxime ether or nitrile was achieved by using atomically dispersed cobalt catalyst and hydroxylamine. Diversified substrate patterns, including symmetrical and unsymmetrical alkenes, di- and tri-substituted alkenes, and late-stage functionalization of complex alkenes were demonstrated. The reaction was successfully scaled up and demonstrated good performance in recycling experiments. The hot filtration test, catalyst poisoning and radical scavenger experiment, time kinetics, and studies on the reaction intermediate collectively pointed to a radical mechanism with cobalt/acid/O2 promoted C-C bond cleavage as the key step.

Engineering Atomically Dispersed Cu-N1 S2 Sites via Chemical Vapor Deposition to Boost Enzyme-Like Activity for Efficient Tumor Therapy

Single-atom nanozymes (SAzymes), with well-defined and uniform atomic structures, are an emerging type of natural enzyme mimics. Currently, it is important but challenging to rationally design high-performance SAzymes and deeply reveal the interaction mechanism between SAzymes and substrate molecules. Herein, this work reports the controllable fabrication of a unique Cu-N1 S2 -centred SAzyme (Cu-N/S-C) via a chemical vapor deposition-based sulfur-engineering strategy. Benefiting from the optimized geometric and electronic structures of single-atom sites, Cu-N/S-C SAzyme shows boosted enzyme-like activity, especially in catalase-like activity, with a 13.8-fold increase in the affinity to hydrogen peroxide (H2 O2 ) substrate and a 65.2-fold increase in the catalytic efficiency when compared to Cu-N-C SAzyme with Cu-N3 sites. Further theoretical studies reveal that the increased electron density around single-atom Cu is achieved through electron redistribution, and the efficient charge transfer between Cu-N/S-C and H2 O2 is demonstrated to be more beneficial for the adsorption and activation of H2 O2 . The as-designed Cu-N/S-C SAzyme possesses an excellent antitumor effect through the synergy of catalytic therapy and oxygen-dependent phototherapy. This study provides a strategy for the rational design of SAzymes, and the proposed electron redistribution and charge transfer mechanism will help to understand the coordination environment effect of single-atom metal sites on H2 O2 -mediated enzyme-like catalytic processes.

Leveraging Interlayer Interaction in M-N-C Catalysts for Enhanced Activity in Oxygen Reduction Reactions

Atomically dispersed metal-nitrogen-carbon (M-N-C) materials are deemed promising catalysts for the oxygen reduction reaction (ORR) in fuel cells. Yet the multilayer nature of M-N-C has been largely neglected in computational analysis. To bridge the gap, we conducted a first-principles investigation using bilayer M-N-C models (TMNx/G-TMNy/G, TM = Mn, Fe, Co, Ni, Cu, G = graphene, x, y = 3 or 4), where the TMs on the top serves as the active center. While in-plane TMN4 at the bottom has a minimal impact on the ORR, out-of-plane TMN3 substantially influences the adsorption free energy of OH through a strong interlayer bonding interaction. By leveraging interlayer interactions, we appreciably lowered the overpotential of selected TMN4 (TM = Co, Ni, Cu) and achieved a minimum of 0.40 V on CoN4/G-CuN3/G. Constant potential calculations revealed weak dependence of OH binding energy on external voltage and obtained results comparable to constant charge calculation. This study provided new physical insight into modulating naturally occurring multilayer M-N-C catalysts.

Electric Field Enhanced Ammoxidation of Aldehydes Using Supported Fe Clusters Under Ambient Oxygen Pressure

Heterogeneous catalytic ammoxidation provides an eco-friendly route for the cyanide-free synthesis of nitrile compounds, which are important precursors for synthetic chemistry and pharmaceutical applications. However, in general such a process requires high pressures of molecular oxygen at elevated temperatures to accelerate the oxygen reduction and imine dehydrogenation steps, which is highly risky in practical applications. Here, we report an electric field enhanced ammoxidation system using a supported Fe clusters catalyst (Fe/NC), which enables efficient synthesis of nitriles from the corresponding aldehydes under ambient air pressure at room temperature (RT). A synergistic effect between the external electric field and the Fe/NC catalyst promotes the ammonia activation and the dehydrogenation of the generated imine intermediates and avoids the unwanted backwards reaction to aldehydes. This electric field enhanced ammoxidation system presents high efficiency and selectivity for the conversion of a series of aldehydes under mild conditions with high durability, rendering it an attractive process for the green synthesis of nitriles with fragile functional groups.

Bioinspired porous three-coordinated single-atom Fe nanozyme with oxidase-like activity for tumor visual identification via glutathione

Inspired by structures of natural metalloenzymes, a biomimetic synthetic strategy is developed for scalable synthesis of porous Fe-N3 single atom nanozymes (pFeSAN) using hemoglobin as Fe-source and template. pFeSAN delivers 3.3- and 8791-fold higher oxidase-like activity than Fe-N4 and Fe3O4 nanozymes. The high catalytic performance is attributed to (1) the suppressed aggregation of atomically dispersed Fe; (2) facilitated mass transfer and maximized exposure of active sites for the created mesopores by thermal removal of hemoglobin (2 ~ 3 nm); and (3) unique electronic configuration of Fe-N3 for the oxygen-to-water oxidation pathway (analogy with natural cytochrome c oxidase). The pFeSAN is successfully demonstrated for the rapid colorimetric detection of glutathione with a low limit of detection (2.4 nM) and wide range (50 nM-1 mM), and further developed as a real-time, facile, rapid (~6 min) and precise visualization analysis methodology of tumors via glutathione level, showing its potentials for diagnostic and clinic applications.

Water-Promoted Carbon-Carbon Bond Cleavage Employing a Reusable Fe Single-Atom Catalyst

The development of methods for selective cleavage reactions of thermodynamically stable C-C/C=C bonds in a green manner is a challenging research field which is largely unexplored. Herein, we present a heterogeneous Fe-N-C catalyst with highly dispersed iron centers that allows for the oxidative C-C/C=C bond cleavage of amines, secondary alcohols, ketones, and olefins in the presence of air (O2 ) and water (H2 O). Mechanistic studies reveal the presence of water to be essential for the performance of the Fe-N-C system, boosting the product yield from <1 % to >90 %. Combined spectroscopic characterizations and control experiments suggest the singlet 1 O2 and hydroxide species generated from O2 and H2 O, respectively, take selectively part in the C-C bond cleavage. The broad applicability (>40 examples) even for complex drugs as well as high activity, selectivity, and durability under comparably mild conditions highlight this unique catalytic system.

Aerobic oxidative C-C bond cleavage and functionalization for the synthesis of value-added chemicals

The aerobic oxidative cleavage of C-C bonds is an attractive and sustainable route for constructing valuable molecules such as esters, nitriles, and amides. Traditionally homogeneous catalytic systems for C-C bond cleavage required harsh conditions, stoichiometric oxidants, and noble metal catalysts to overcome the thermodynamic and kinetic barriers of C-C bonds, imposing environmental concerns of the transformation. Therefore, developing efficient, low-cost, and environmentally benign methods for C-C bond cleavage is of great importance and a cutting-edge area in modern chemistry. This feature article summarizes the sustainable aerobic oxidative C-C bond cleavage method developed by our group in the past 5 years. Fundamental principles in catalyst design, substrate scope, and mechanism for C-C bond cleavage are also discussed.

Cobalt nanoparticles-catalyzed aerobic oxygenation and esterification of alkynes via C≡C bonds cleavage

An unprecedented efficient protocol is developed for the oxidative cleavage of C≡C bonds in alkynes to produce structure-diverse esters using heterogeneous cobalt nanoparticles as catalyst with molecular oxygen as the oxidant. A diverse set of mono- and multisubstituted aromatic and aliphatic alkynes can be effectively cleaved and converted into the corresponding esters. Characterization analysis and control experiments indicate high surface area and pore volume, as well as nanostructured nitrogen-doped graphene-layer coated cobalt nanoparticles are possibly responsible for excellent catalytic activity. Mechanistic studies reveal that ketones derived from alkynes under oxidative conditions are formed as intermediates, which subsequently are converted to esters through a tandem sequential process. The catalyst can be recycled up to five times without significant loss of activity.

Ultra-sensitive detection of 5-fluorouracil by flow injection chemiluminescence immunoassay based on Fenton-like effect of single atom Co nanozyme

Single atom nanozymes (SAzymes) are considered as the most hopeful candidates for replacing natural enzymes. In this work, a flow-injection chemiluminescent immunoassay (FI-CLIA) based on a Fenton-like activity single atom cobalt nanozyme (Co SAzyme) was developed for the rapid and sensitive detection of 5-fluorouracil (5-Fu) in serum for the first time. Co SAzyme was prepared by an in-situ etching method at room temperature using ZIF-8 metal-organic frameworks (ZIF-8 MOFs). With excellent chemical stability and ultra-high porosity of ZIF-8 MOFs as the core, Co SAzyme presents high Fenton-like activity which can catalyze the decomposition of H₂O₂ to produce large amounts of superoxide radical anions, thus effectively amplifying the chemiluminescence of the Luminol-H₂O₂ system. In addition, carboxyl-modified resin beads were used as the substrate to load more antigens due to its advantages of good biocompatibility and large specific surface area. Under optimal conditions, the detection range of 5-Fu was 0.001-1000 ng mL^-1 with a limit of detection of 0.29 pg mL^-1 (S/N = 3). Furthermore, the immunosensor was successfully applied for the detection of 5-Fu in human serum samples with satisfactory results, displaying the potential application of this strategy for bioanalysis and clinical diagnosis.

Oxidative cleavage and ammoxidation of organosulfur compounds via synergistic Co-Nx sites and Co nanoparticles catalysis

The cleavage and functionalization of C-S bonds have become a rapidly growing field for the design or discovery of new transformations. However, it is usually difficult to achieve in a direct and selective fashion due to the intrinsic inertness and catalyst-poisonous character. Herein, for the first time, we report a novel and efficient protocol that enables direct oxidative cleavage and cyanation of organosulfur compounds by heterogeneous nonprecious-metal Co-N-C catalyst comprising graphene encapsulated Co nanoparticles and Co-Nx sites using oxygen as environmentally benign oxidant and ammonia as nitrogen source. A wide variety of thiols, sulfides, sulfoxides, sulfones, sulfonamides, and sulfonyl chlorides are viable in this reaction, enabling access to diverse nitriles under cyanide-free conditions. Moreover, modifying the reaction conditions also allows for the cleavage and amidation of organosulfur compounds to deliver amides. This protocol features excellent functional group tolerance, facile scalability, cost-effective and recyclable catalyst, and broad substrate scope. Characterization and mechanistic studies reveal that the remarkable effectiveness of the synergistic catalysis of Co nanoparticles and Co-Nx sites is crucial for achieving outstanding catalytic performance.

Biomass-Derived Single Zn Atom Catalysts: The Multiple Roles of Single Zn Atoms in the Oxidative Cleavage of C-N Bonds

The C-N bond cleavage represents one kind of important organic and biochemical transformation, which has attracted great interest in recent years. The oxidative cleavage of C-N bonds in N,N-dialkylamines into N-alkylamines has been well documented, but it is challenging in the further oxidative cleavage of C-N bonds in N-alkylamines into primary amines due to the thermally unfavorable release of α-position H from N-C_α-H and the paralleling side reactions. Herein, a biomass-derived single Zn atom catalyst (ZnN₄-SAC) was discovered to be a robust heterogeneous non-noble catalyst for the oxidative cleavage of C-N bonds in N-alkylamines with O₂ molecules. Experimental results and DFT calculation revealed that ZnN₄-SAC not only activates O₂ to generate superoxide radicals (·O₂ ^-) for the oxidation of N-alkylamines to generate imine intermediates (C=N), but the single Zn atoms also served as the Lewis acid sites to promote the cleavage of C=N bonds in imine intermediates, including the first addition of H₂O to generate α-hydroxylamine intermediates and the following C-N bond cleavage via a H atom transfer process.

Axial N Ligand-Modulated Ultrahigh Activity and Selectivity Hyperoxide Activation over Single-Atoms Nanozymes

Learning and studying the structure-activity relationship in the bio-enzymes is conducive to the design of nanozymes for energy and environmental application. Herein, Fe single-atom nanozymes (Fe-SANs) with Fe-N5 site, inspired by the structure of cytochromes P450 (CYPs), are developed and characterized. Similar to the CYPs, the hyperoxide can activate the Fe(III) center of Fe-SANs to generate Fe(IV)O intermediately, which can transfer oxygen to the substrate with ultrafast speed. Particularly, using the peroxymonosulfate (PMS)-activated Fe-SANs to oxidize sulfamethoxazole, a typical antibiotic contaminant, as the model hyperoxides activation reaction, the excellent activity within 284 min-1 g-1 (catalyst) mmol-1 (PMS) oxidation rate and 91.6% selectivity to the Fe(IV)O intermediate oxidation are demonstrated. More importantly, instead of promoting PMS adsorption, the axial N ligand modulates the electron structure of FeN5 SANs for the lower reaction energy barrier and promotes electron transfer to PMS to produce Fe(IV)O intermediate with high selectivity. The highlight of the axial N coordination in the nanozymes in this work provides deep insight to guide the design and development of nanozymes nearly to the bio-enzyme with excellent activity and selectivity.