Kinesin moves by an asymmetric hand-over-hand mechanism

ATP Concentration-Dependent Fractions of One-Head-Bound and Two-Head-Bound States of the Kinesin Motor during Its Chemomechanical Coupling Cycle

Kinesin is a typical motor protein that can use the chemical energy of ATP hydrolysis to step processively on microtubules, alternating between one-head-bound and two-head-bound states. Some published experimental results showed that the duration of the one-head-bound state increases greatly with a decrease in ATP concentration, whereas the duration of the two-head-bound state is independent of ATP concentration, indicating that ATP binding occurs in the one-head-bound state. On the contrary, other experimental results showed that the duration of the two-head-bound state increases greatly with a decrease in ATP concentration, whereas the duration of the one-head-bound state increases slightly with a decrease in ATP concentration, indicating that ATP binding occurs mainly in the two-head-bound state. Here, we explain consistently and quantitatively these contradictory experimental results, resolving the controversy that is critical to the chemomechanical coupling mechanism of the kinesin motor.

Shining Light in Mechanobiology: Optical Tweezers, Scissors, and Beyond

Mechanobiology helps us to decipher cell and tissue functions by looking at changes in their mechanical properties that contribute to development, cell differentiation, physiology, and disease. Mechanobiology sits at the interface of biology, physics and engineering. One of the key technologies that enables characterization of properties of cells and tissue is microscopy. Combining microscopy with other quantitative measurement techniques such as optical tweezers and scissors, gives a very powerful tool for unraveling the intricacies of mechanobiology enabling measurement of forces, torques and displacements at play. We review the field of some light based studies of mechanobiology and optical detection of signal transduction ranging from optical micromanipulation-optical tweezers and scissors, advanced fluorescence techniques and optogenentics. In the current perspective paper, we concentrate our efforts on elucidating interesting measurements of forces, torques, positions, viscoelastic properties, and optogenetics inside and outside a cell attained when using structured light in combination with optical tweezers and scissors. We give perspective on the field concentrating on the use of structured light in imaging in combination with tweezers and scissors pointing out how novel developments in quantum imaging in combination with tweezers and scissors can bring to this fast growing field.

Molecular mechanism of interaction between kinesin motors affecting their residence times on microtubule lattice and end

Kinesin superfamily can be classified into 14 subfamilies. Some families of kinesin motors such as kinesin-1 are responsible for long-distance intracellular transports and thus the motors are required to reside on the microtubule (MT) lattice for a longer time than at the end. Some families such as kinesin-8 Kip3 and kinesin-5 Eg5 are responsible for the regulation of MT length by depolymerizing or polymerizing the MT from the plus end and thus the motors are required to reside at the MT end for a long time. Under the crowded condition of the motors, it was found experimentally that the residence times of the kinesin-8 Kip3 and kinesin-5 Eg5 at the MT end are reduced greatly compared to the single-motor case. However, the underlying mechanism of different families of kinesin motors having different MT-end residence times is unknown. The molecular mechanism by which the interaction between the two motors greatly reduces the residence time of the motor at the MT end is elusive. In addition, during the processive stepping on the MT lattice, when two kinesin motors meet it is unknown how the interaction between them affects their dissociation rates. To address the above unclear issues, here we make a consistent and theoretical study of the residence times of the kinesin-1, kinesin-8 Kip3 and kinesin-5 Eg5 motors on the MT lattice and at the end under both the single-motor condition and multiple-motors or crowded condition.

Optical trapping of two different microparticles by a double-tapered fiber probe

We theoretically and experimentally study the optical trapping of two different microparticles by a double-tapered optical fiber probe (DOFP) which is fabricated by the interfacial etching method. A SiO₂ microsphere and a yeast, or two SiO₂ microspheres with different diameters, are trapped. We calculate and measure the trapping forces on the two microparticles, discuss the impacts of the geometrical size and refractive index on the trapping forces. Both the theoretical calculation and experimental measurements indicate that if the two particles have the same refractive index, the larger the second particle is, the larger the trapping force is. Whereas, if the two particles have the same geometrical size, the smaller the refractive index is, the lager trapping force is. Trapping and manipulation of different multiple microparticles by a DOFP enhance the application of optical tweezers, especially in biomedical engineering and material science.

Experimental Guidelines to Image Transient Single-Molecule Events Using Graphene Liquid Cell Electron Microscopy

In quest of the holy grail to "see" how individual molecules interact in liquid environments, single-molecule imaging methods now include liquid-phase electron microscopy, whose resolution can be nanometers in space and several frames per second in time using an ordinary electron microscope that is routinely available to many researchers. However, with the current state of the art, protocols that sound similar to those described in the literature lead to outcomes that can differ. The key challenge is to achieve sample contrast under a safe electron dose within a frame rate adequate to capture the molecular process. Here, we present such examples from different systems─synthetic polymer, lipid assembly, DNA-enzyme─in which we have done this using graphene liquid cells. We describe detailed experimental procedures and share empirical experience for conducting successful experiments, starting from fabrication of a graphene liquid cell, to identification of high-quality liquid pockets from desirable shapes and sizes, to effective searching for target sample pockets under electron microscopy, and to discrimination of sample molecules and molecular processes of interest. These experimental tips can assist others who wish to make use of this method.

Magic-angle-spinning NMR structure of the kinesin-1 motor domain assembled with microtubules reveals the elusive neck linker orientation

Microtubules (MTs) and their associated proteins play essential roles in maintaining cell structure, organelle transport, cell motility, and cell division. Two motors, kinesin and cytoplasmic dynein link the MT network to transported cargos using ATP for force generation. Here, we report an all-atom NMR structure of nucleotide-free kinesin-1 motor domain (apo-KIF5B) in complex with paclitaxel-stabilized microtubules using magic-angle-spinning (MAS) NMR spectroscopy. The structure reveals the position and orientation of the functionally important neck linker and how ADP induces structural and dynamic changes that ensue in the neck linker. These results demonstrate that the neck linker is in the undocked conformation and oriented in the direction opposite to the KIF5B movement. Chemical shift perturbations and intensity changes indicate that a significant portion of ADP-KIF5B is in the neck linker docked state. This study also highlights the unique capability of MAS NMR to provide atomic-level information on dynamic regions of biological assemblies.

Propofol attenuates kinesin-mediated axonal vesicle transport and fusion

Propofol is a widely used general anesthetic, yet the understanding of its cellular effects is fragmentary. General anesthetics are not as innocuous as once believed and have a wide range of molecular targets that include kinesin motors. Propofol, ketamine, and etomidate reduce the distances that Kinesin-1 KIF5 and Kinesin-2 KIF3 travel along microtubules in vitro. These transport kinesins are highly expressed in the CNS, and their dysfunction leads to a range of human pathologies including neurodevelopmental and neurodegenerative diseases. While in vitro data suggest that general anesthetics may disrupt kinesin transport in neurons, this hypothesis remains untested. Here we find that propofol treatment of hippocampal neurons decreased vesicle transport mediated by Kinesin-1 KIF5 and Kinesin-3 KIF1A ∼25-60%. Propofol treatment delayed delivery of the KIF5 cargo NgCAM to the distal axon. Because KIF1A participates in axonal transport of presynaptic vesicles, we tested whether prolonged propofol treatment affects synaptic vesicle fusion mediated by VAMP2. The data show that propofol-induced transport delay causes a significant decrease in vesicle fusion in distal axons. These results are the first to link a propofol-induced delay in neuronal trafficking to a decrease in axonal vesicle fusion, which may alter physiological function during and after anesthesia.

A mechanochemical model of the forward/backward movement of motor protein kinesin-1

Kinesin-1 is an ATP-driven, two-headed motor protein that transports intracellular cargoes (loads) along microtubules. The movement of kinesin-1 has generally been modeled according to its correlation with ATP cleavage (forward movement), synthesis (backward movement), or unproductive cleavage (futile consumption). Based on recent experimental observations, we formulate a mechanochemical model for this movement in which the forward/backward/futile cycle can be realized through multiple biochemical pathways. Our results show that the backward motion of kinesin-1 occurs mainly through backward sliding along the microtubule and is usually also coupled with ATP hydrolysis. We also found that with a low external load, about 80% of ATP is wasted (futile consumption) by kinesin-1. Furthermore, at high ATP concentrations or under high external loads, both heads of kinesin-1 are always in the ATP- or ADP ⋅ Pi-binding state and tightly bound to the microtubule, while at low ATP concentrations and low loads, kinesin-1 is mainly in the one-head-bound state. Unless the external load is near the stall force, the motion of kinesin-1 is almost deterministic.

Plus and minus ends of microtubules respond asymmetrically to kinesin binding by a long-range directionally driven allosteric mechanism

Although it is known that majority of kinesin motors walk predominantly toward the plus end of microtubules (MTs) in a hand-over-hand manner, the structural origin of the stepping directionality is not understood. To resolve this issue, we modeled the structures of kinesin-1 (Kin1), MT, and the Kin1-MT complex using the elastic network model and calculated the residue-dependent responses to a local perturbation in the constructs. Kin1 binding elicits an asymmetric response that is pronounced in α/β-tubulin dimers in the plus end of the MT. Kin1 opens the clefts of multiple plus end α/β-tubulin dimers, creating binding-competent conformations, which is required for processivity. Reciprocally, MT induces correlations between switches I and II in the motor and enhances fluctuations in adenosine 5'-diphosphate and the residues in the binding pocket. Our findings explain both the directionality of stepping and MT effects on a key step in the catalytic cycle of kinesin.

Reaction-path statistical mechanics of enzymatic kinetics

We introduce a reaction-path statistical mechanics formalism based on the principle of large deviations to quantify the kinetics of single-molecule enzymatic reaction processes under the Michaelis-Menten mechanism, which exemplifies an out-of-equilibrium process in the living system. Our theoretical approach begins with the principle of equal a priori probabilities and defines the reaction path entropy to construct a new nonequilibrium ensemble as a collection of possible chemical reaction paths. As a result, we evaluate a variety of path-based partition functions and free energies by using the formalism of statistical mechanics. They allow us to calculate the timescales of a given enzymatic reaction, even in the absence of an explicit boundary condition that is necessary for the equilibrium ensemble. We also consider the large deviation theory under a closed-boundary condition of the fixed observation time to quantify the enzyme-substrate unbinding rates. The result demonstrates the presence of a phase-separation-like, bimodal behavior in unbinding events at a finite timescale, and the behavior vanishes as its rate function converges to a single phase in the long-time limit.

Effect of varying load in moving period of a step on dynamics of molecular motors

During the processive stepping of a molecular motor on its polar track, a step consists of a long dwell period and a very short moving period. In single molecule optical trapping experiments to determine the load dependence of the motor dynamics, although the motor experiences a constant load during the dwell period, it experiences a varying load during the moving period. However, in previous theoretical studies to explain the single molecule optical trapping data, it was simply assumed that the motor experiences a constant load during both the dwell period and the following moving period. Thus, an important but unclear issue is whether the assumption is appropriate in the theoretical studies. Here, we take kinesin and myosin-V as examples to study theoretically the motor dynamics with the consideration of the varying load during the moving period and compare with that with the assumption of the constant load. The studies show that in the optical trapping experiments employed in the literature, for the kinesin with a small step size of about 8 nm it is a good approximation to make the theoretical studies by assuming that the motor experiences the constant load during the moving period. For the myosin-V with a large step size of about 36 nm, there are small but noticeable deviations of the results obtained by considering that the motor experiences the varying load during the moving period from those by assuming that the motor experiences the constant load. .

Measurement of Macromolecular Crowding in Rhodobacter sphaeroides under Different Growth Conditions

The bacterial cytoplasm is a very crowded environment, and changes in crowding are thought to have an impact on cellular processes including protein folding, molecular diffusion and complex formation. Previous studies on the effects of crowding have generally compared cellular activity after imposition of stress. In response to different light intensities, in unstressed conditions, Rhodobacter sphaeroides changes the number of 50-nm intracytoplasmic membrane (ICM) vesicles, with the number varying from a few to over a thousand per cell. In this work, the effects of crowding induced by ICM vesicles in photoheterotrophic R. sphaeroides were investigated using a fluorescence resonance energy transfer (FRET) sensor and photoactivated localization microscopy (PALM). In low light grown cells where the cytoplasm has large numbers of ICM vesicles, the FRET probe adopts a more condensed conformation, resulting in higher FRET ratio readouts compared to high light cells with fewer ICM vesicles. The apparent diffusion coefficients of different sized proteins, PAmCherry, PAmCherry-CheY₆, and L1-PAmCherry, measured via PALM showed that diffusion of protein molecules >27 kDa decreased as the number of ICM vesicles increased. In low light R. sphaeroides where the crowding level is high, protein molecules were found to diffuse more slowly than in aerobic and high light cells. This suggests that some physiological activities might show different kinetics in bacterial species whose intracellular membrane organization can change with growth conditions. IMPORTANCE The bacterial cytoplasm is known to be crowded, with that crowding suggested to change with growth, with chromosome replication, and under stress conditions. Many physiological activities depend on proteins and substrates diffusing through the cytoplasm; in some cases, large complexes need to diffuse from pole to pole. It is unclear how increases in crowding might affect cellular functions. We investigated whether we could naturally change the crowded state of the Rhodobacter sphaeroides cytoplasm by growing under different growth conditions. We show that increasing the number of intracytoplasmic vesicles by growing photosynthetically does change the crowded state of the cytoplasm and also alters the diffusion rates of different sized proteins measured. As many other cellular processes require protein movement, these findings could have broader implications for bacterial growth and responses under changing conditions that could alter cytoplasmic crowding.

Oxidative Phosphorylation Is Required for Powering Motility and Development of the Sleeping Sickness Parasite Trypanosoma brucei in the Tsetse Fly Vector

The single-celled parasite Trypanosoma brucei is transmitted by hematophagous tsetse flies. Life cycle progression from mammalian bloodstream form to tsetse midgut form and, subsequently, infective salivary gland form depends on complex developmental steps and migration within different fly tissues. As the parasite colonizes the glucose-poor insect midgut, ATP production is thought to depend on activation of mitochondrial amino acid catabolism via oxidative phosphorylation (OXPHOS). This process involves respiratory chain complexes and F₁F_o-ATP synthase and requires protein subunits of these complexes that are encoded in the parasite's mitochondrial DNA (kDNA). Here, we show that progressive loss of kDNA-encoded functions correlates with a decreasing ability to initiate and complete development in the tsetse. First, parasites with a mutated F₁F_o-ATP synthase with reduced capacity for OXPHOS can initiate differentiation from bloodstream to insect form, but they are unable to proliferate in vitro. Unexpectedly, these cells can still colonize the tsetse midgut. However, these parasites exhibit a motility defect and are severely impaired in colonizing or migrating to subsequent tsetse tissues. Second, parasites with a fully disrupted F₁F_o-ATP synthase complex that is completely unable to produce ATP by OXPHOS can still differentiate to the first insect stage in vitro but die within a few days and cannot establish a midgut infection in vivo. Third, parasites lacking kDNA entirely can initiate differentiation but die soon after. Together, these scenarios suggest that efficient ATP production via OXPHOS is not essential for initial colonization of the tsetse vector but is required to power trypanosome migration within the fly. IMPORTANCE African trypanosomes cause disease in humans and their livestock and are transmitted by tsetse flies. The insect ingests these parasites with its blood meal, but to be transmitted to another mammal, the trypanosome must undergo complex development within the tsetse fly and migrate from the insect's gut to its salivary glands. Crucially, the parasite must switch from a sugar-based diet while in the mammal to a diet based primarily on amino acids when it develops in the insect. Here, we show that efficient energy production by an organelle called the mitochondrion is critical for the trypanosome's ability to swim and to migrate through the tsetse fly. Surprisingly, trypanosomes with impaired mitochondrial energy production are only mildly compromised in their ability to colonize the tsetse fly midgut. Our study adds a new perspective to the emerging view that infection of tsetse flies by trypanosomes is more complex than previously thought.

High-resolution Single-molecule Magnetic Tweezers

Single-molecule magnetic tweezers deliver magnetic force and torque to single target molecules, permitting the study of dynamic changes in biomolecular structures and their interactions. Because the magnetic tweezer setups can generate magnetic fields that vary slowly over tens of millimeters-far larger than the nanometer scale of the single molecule events being observed-this technique can maintain essentially constant force levels during biochemical experiments while generating a biologically meaningful force on the order of 1-100 pN. When using bead-tether constructs to pull on single molecules, smaller magnetic beads and shorter submicrometer tethers improve dynamic response times and measurement precision. In addition, employing high-speed cameras, stronger light sources, and a graphics programming unit permits true high-resolution single-molecule magnetic tweezers that can track nanometer changes in target molecules on a millisecond or even submillisecond time scale. The unique force-clamping capacity of the magnetic tweezer technique provides a way to conduct measurements under near-equilibrium conditions and directly map the energy landscapes underlying various molecular phenomena. High-resolution single-molecule magnetic tweezers can thus be used to monitor crucial conformational changes in single-protein molecules, including those involved in mechanotransduction and protein folding. Expected final online publication date for the Annual Review of Biochemistry, Volume 91 is June 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

A new class of biological ion-driven rotary molecular motors with 5:2 symmetry

Several new structures of three types of protein complexes, obtained by cryo-electron microscopy (cryo-EM) and published between 2019 and 2021, identify a new family of natural molecular wheels, the "5:2 rotary motors." These span the cytoplasmic membranes of bacteria, and their rotation is driven by ion flow into the cell. They consist of a pentameric wheel encircling a dimeric axle within the cytoplasmic membrane of both Gram-positive and gram-negative bacteria. The axles extend into the periplasm, and the wheels extend into the cytoplasm. Rotation of these wheels has never been observed directly; it is inferred from the symmetry of the complexes and from the roles they play within the larger systems that they are known to power. In particular, the new structure of the stator complex of the Bacterial Flagellar Motor, MotA₅B₂, is consistent with a "wheels within wheels" model of the motor. Other 5:2 rotary motors are believed to share the core rotary function and mechanism, driven by ion-motive force at the cytoplasmic membrane. Their structures diverge in their periplasmic and cytoplasmic parts, reflecting the variety of roles that they perform. This review focuses on the structures of 5:2 rotary motors and their proposed mechanisms and functions. We also discuss molecular rotation in general and its relation to the rotational symmetry of molecular complexes.

Dynamics of kinesin motor proteins under longitudinal and sideways loads

The available single-molecule data showed that different species of N-terminal kinesin molecular motors have very different features on dependences of run length and dissociation rate upon longitudinal load acting on stalks of the motors. The prior single-molecule data for Loligo pealei kinesin-1 indicated that the sideways load has only a weak effect on the velocity, but even a small sideways load can cause a large reduction in the run length. However, these puzzling experimental data remain to be explained and the underlying physical mechanisms are unclear. Here, based on our proposed model we study analytically the dynamics of the N-terminal kinesin motors such as Loligo pealei kinesin-1, Drosophila kinesin-1, truncated kinesin-5/Eg5, truncated kinesin-12/Kif15, kinesin-2/Kif17 and kinesin-2/Kif3AB dimers under both longitudinal and sideways loads. The theoretical results explain quantitatively the available experimental data and provide predictions. The physical mechanism of different kinesin species showing very different features on the load-dependent dynamics and the physical mechanism of the effect of the sideways load on the dynamics are revealed.

Estimating Entropy Production from Waiting Time Distributions

Living systems operate far from thermal equilibrium by converting the chemical potential of ATP into mechanical work to achieve growth, replication, or locomotion. Given time series observations of intra-, inter-, or multicellular processes, a key challenge is to detect nonequilibrium behavior and quantify the rate of free energy consumption. Obtaining reliable bounds on energy consumption and entropy production directly from experimental data remains difficult in practice, as many degrees of freedom typically are hidden to the observer, so that the accessible coarse-grained dynamics may not obviously violate detailed balance. Here, we introduce a novel method for bounding the entropy production of physical and living systems which uses only the waiting time statistics of hidden Markov processes and, hence, can be directly applied to experimental data. By determining a universal limiting curve, we infer entropy production bounds from experimental data for gene regulatory networks, mammalian behavioral dynamics, and numerous other biological processes. Further considering the asymptotic limit of increasingly precise biological timers, we estimate the necessary entropic cost of heartbeat regulation in humans, dogs, and mice.

Molecular Mechanism of Processive Stepping of Kinesin Motors

Kinesin-1 is a motor protein that can step processively on microtubule by hydrolyzing ATP molecules, playing an essential role in intracellular transports. To better understand the mechanochemical coupling of the motor stepping cycle, numerous structural, biochemical, single molecule, theoretical modeling and numerical simulation studies have been undertaken for the kinesin-1 motor. Recently, a novel ultraresolution optical trapping method was employed to study the mechanics of the kinesin-1 motor and new results were supplemented to its stepping dynamics. In this commentary, the new single molecule results are explained well theoretically with one of the models presented in the literature for the mechanochemical coupling of the kinesin-1 motor. With the model, various prior experimental results for dynamics of different families of N-terminal kinesin motors have also been explained quantitatively.

Effects of Gold Nanoparticles on the Stepping Trajectories of Kinesin

A substantial increase in the temporal resolution of the stepping of dimeric molecular motors is possible by tracking the position of a large gold nanoparticle (GNP) attached to a labeled site on one of the heads. This technique was employed to measure the stepping trajectories of conventional kinesin (Kin1) using the time-dependent position of the GNP as a proxy. The trajectories revealed that the detached head always passes to the right of the head that is tightly bound to the microtubule (MT) during a step. In interpreting the results of such experiments, it is assumed that the GNP does not significantly alter the diffusive motion of the detached head. We used coarse-grained simulations of a system consisting of the MT-Kin1 complex with and without attached GNP to investigate how the stepping trajectories are affected. The two significant findings are: (1) The GNP does not faithfully track the position of the stepping head, and (2) the rightward bias is typically exaggerated by the GNP. Both these findings depend on the precise residue position to which the GNP is attached. Surprisingly, the stepping trajectories of kinesin are not significantly affected if, in addition to the GNP, a 1 μm diameter cargo is attached to the coiled coil. Our simulations suggest the effects of the large probe have to be considered when inferring the stepping mechanisms using GNP tracking experiments.

Microtubule pivoting enables mitotic spindle assembly in S. cerevisiae

To assemble a bipolar spindle, microtubules emanating from two poles must bundle into an antiparallel midzone, where plus end–directed motors generate outward pushing forces to drive pole separation. Midzone cross-linkers and motors display only modest preferences for antiparallel filaments, and duplicated poles are initially tethered together, an arrangement that instead favors parallel interactions. Pivoting of microtubules around spindle poles might help overcome this geometric bias, but the intrinsic pivoting flexibility of the microtubule–pole interface has not been directly measured, nor has its importance during early spindle assembly been tested. By measuring the pivoting of microtubules around isolated yeast spindle poles, we show that pivoting flexibility can be modified by mutating a microtubule-anchoring pole component, Spc110. By engineering mutants with different flexibilities, we establish the importance of pivoting in vivo for timely pole separation. Our results suggest that passive thermal pivoting can bring microtubules from side-by-side poles into initial contact, but active minus end–directed force generation will be needed to achieve antiparallel alignment.

Optical manipulation of a dielectric particle along polygonal closed-loop geometries within a single water droplet

We report a new method to optically manipulate a single dielectric particle along closed-loop polygonal trajectories by crossing a suite of all-fiber Bessel-like beams within a single water droplet. Exploiting optical radiation pressure, this method demonstrates the circulation of a single polystyrene bead in both a triangular and a rectangle geometry enabling the trapped particle to undergo multiple circulations successfully. The crossing of the Bessel-like beams creates polygonal corners where the trapped particles successfully make abrupt turns with acute angles, which is a novel capability in microfluidics. This offers an optofluidic paradigm for particle transport overcoming turbulences in conventional microfluidic chips.

Computational modeling of dynein motor proteins at work

Along with various experimental methods, a combination of theoretical and computational methods is essential to explore different length-scale and time-scale processes in the biological system. The functional mechanism of a dynein, an ATP-fueled motor protein, working in a multiprotein complex, involves a wide range of length/time-scale events. It generates mechanical force from chemical energy and moves on microtubules towards the minus end direction while performing a large number of biological processes including ciliary beating, intracellular material transport, and cell division. Like in the cases of other conventional motor proteins, a combination of experimental techniques including X-crystallography, cryo-electron microscopy, and single molecular assay have provided a wealth of information about the mechanochemical cycle of a dynein. Dyneins have a large and complex structural architecture and therefore, computational modeling of different aspects of a dynein is extremely challenging. As the process of dynein movement involves varying length and timescales, it demands, like in experiments, a combination of computational methods covering such a wide range of processes for the comprehensive investigation of the mechanochemical cycle. In this review article, we will summarize how the use of state-of-the-art computational methods can provide a detailed molecular understanding of the mechanochemical cycle of the dynein. We implemented all-atom molecular dynamics simulations and hybrid quantum-mechanics/molecular-mechanics simulations to explore the ATP hydrolysis mechanisms at the primary ATPase site (AAA1) of dynein. To investigate the large-scale conformational changes we employed coarse-grained structure-based molecular dynamics simulations to capture the domain motions. Here we explored the conformational changes upon binding of ATP at AAA1, nucleotide state-dependent regulation of the mechanochemical cycle, and inter-head coordination by inter-head tension. Additionally, implementing a phenomenological theoretical model we explore the force-dependent detachment rate of a motorhead from the microtubule and the principle of multi-dynein cooperation during cargo transport.

Five-Site Model for Brownian Dynamics Simulations of a Molecular Walker in Three Dimensions

Motor proteins play an important role in many biological processes and have inspired the development of synthetic analogues. Molecular walkers, such as kinesin, dynein, and myosin V, fulfill a diverse set of functions including transporting cargo along tracks, pulling molecules through membranes, and deforming fibers. The complexity of molecular motors and their environment makes it difficult to model the detailed dynamics of molecular walkers over long time scales. In this work, we present a simple, three-dimensional model for a molecular walker on a bead-spring substrate. The walker is represented by five spherically symmetric particles that interact through common intermolecular potentials and can be simulated efficiently in Brownian dynamics simulations. The movement of motor protein walkers entails energy conversion through ATP hydrolysis while artificial motors typically rely on a local conversion of energy supplied through external fields. We model energy conversion through rate equations for mechanochemical states that couple positional and chemical degrees of freedom and determine the walker conformation through interaction potential parameters. We perform Brownian dynamics simulations for two scenarios: In the first, the model walker transports cargo by walking on a substrate whose ends are fixed. In the second, a tethered motor pulls a mobile substrate chain against a variable force. We measure relative displacements and determine the effects of cargo size and retarding force on the efficiency of the walker. We find that, while the efficiency of our model walker is less than for the biological system, our simulations reproduce trends observed in single-molecule experiments on kinesin. In addition, the model and simulation method presented here can be readily adapted to biological and synthetic systems with multiple walkers.

A model of processive walking and slipping of kinesin-8 molecular motors

Kinesin-8 molecular motor can move with superprocessivity on microtubules towards the plus end by hydrolyzing ATP molecules, depolymerizing microtubules. The available single molecule data for yeast kinesin-8 (Kip3) motor showed that its superprocessive movement is frequently interrupted by brief stick-slip motion. Here, a model is presented for the chemomechanical coupling of the kinesin-8 motor. On the basis of the model, the dynamics of Kip3 motor is studied analytically. The analytical results reproduce quantitatively the available single molecule data on velocity without including the slip and that with including the slip versus external load at saturating ATP as well as slipping velocity versus external load at saturating ADP and no ATP. Predicted results on load dependence of stepping ratio at saturating ATP and load dependence of velocity at non-saturating ATP are provided. Similarities and differences between dynamics of kinesin-8 and that of kinesin-1 are discussed.

Diffusion Biased by a Soft Neck Linker Regulates Kinesin Stepping

Conventional kinesin is a high-performance motor that moves primarily toward the plus end of microtubules and occasionally toward the opposite direction. The physical mechanism of this directional stepping remains unclear. Here we develop a kinetic two-cycle model incorporating kinesin forward and backward stepping, in which the neck linker zippering and ATP catalysis process are conserved in backward steps. This model is quantitatively validated by a variety of experimental data, including load dependence of velocity, stepping ratio, and dwell time. The physical mechanism of kinesin stepping regulated by a biased diffusion process is identified by analyzing the load dependence and relevant thermodynamic properties of the model. Furthermore, the model suggests the kinesin directionality is optimized resulting from fulfilling a thermodynamic constraint. Our modeling provides a chemomechanical coupling mechanism that connects the flexibility of the neck linker zippering effect for direction rectification and the measured performance into a consistent frame.

Mechanistic basis of propofol-induced disruption of kinesin processivity

Propofol is a widely used general anesthetic to induce and maintain anesthesia, and its effects are thought to occur through impact on the ligand-gated channels including the GABA_A receptor. Propofol also interacts with a large number of proteins including molecular motors and inhibits kinesin processivity, resulting in significant decrease in the run length for conventional kinesin-1 and kinesin-2. However, the molecular mechanism by which propofol achieves this outcome is not known. The structural transition in the kinesin neck-linker region is crucial for its processivity. In this study, we analyzed the effect of propofol and its fluorine derivative (fropofol) on the transition in the neck-linker region of kinesin. Propofol binds at two crucial surfaces in the leading head: one at the microtubule-binding interface and the other in the neck-linker region. We observed in both the cases the order-disorder transition of the neck-linker was disrupted and kinesin lost its signal for forward movement. In contrast, there was not an effect on the neck-linker transition with propofol binding at the trailing head. Free-energy calculations show that propofol at the microtubule-binding surface significantly reduces the microtubule-binding affinity of the kinesin head. While propofol makes pi-pi stacking and H-bond interactions with the propofol binding cavity, fropofol is unable to make a suitable interaction at this binding surface. Therefore, the binding affinity of fropofol is much lower compared to propofol. Hence, this study provides a mechanism by which propofol disrupts kinesin processivity and identifies transitions in the ATPase stepping cycle likely affected.

Pathogenic mutations in the kinesin-3 motor KIF1A diminish force generation and movement through allosteric mechanisms

The kinesin-3 motor KIF1A functions in neurons, where its fast and superprocessive motility facilitates long-distance transport, but little is known about its force-generating properties. Using optical tweezers, we demonstrate that KIF1A stalls at an opposing load of ~3 pN but more frequently detaches at lower forces. KIF1A rapidly reattaches to the microtubule to resume motion due to its class-specific K-loop, resulting in a unique clustering of force generation events. To test the importance of neck linker docking in KIF1A force generation, we introduced mutations linked to human neurodevelopmental disorders. Molecular dynamics simulations predict that V8M and Y89D mutations impair neck linker docking. Indeed, both mutations dramatically reduce the force generation of KIF1A but not the motor’s ability to rapidly reattach to the microtubule. Although both mutations relieve autoinhibition of the full-length motor, the mutant motors display decreased velocities, run lengths, and landing rates and delayed cargo transport in cells. These results advance our understanding of how mutations in KIF1A can manifest in disease.

Elementary processes of DNA surface hybridization resolved by single-molecule kinetics: implication for macroscopic device performance

Direct monitoring of single-molecule reactions has recently become a promising means of mechanistic investigation. However, the resolution of reaction pathways from single-molecule experiments remains elusive, primarily because of interference from extraneous processes such as bulk diffusion. Herein, we report a single-molecule kinetic investigation of DNA hybridization on a metal surface, as an example of a bimolecular association reaction. The tip of the scanning tunneling microscope (STM) was functionalized with single-stranded DNA (ssDNA), and hybridization with its complementary strand on an Au(111) surface was detected by the increase in the electrical conductance associated with the electron transport through the resulting DNA duplex. Kinetic analyses of the conductance changes successfully resolved the elementary processes, which involve not only the ssDNA strands and their duplex but also partially hybridized intermediate strands, and we found an increase in the hybridization efficiency with increasing the concentration of DNA in contrast to the knowledge obtained previously by conventional ensemble measurements. The rate constants derived from our single-molecule studies provide a rational explanation of these findings, such as the suppression of DNA melting on surfaces with higher DNA coverage. The present methodology, which relies on intermolecular conductance measurements, can be extended to a range of single-molecule reactions and to the exploration of novel chemical syntheses.

Hybridization of a single DNA molecule on a surface was investigated by electrical conductance measurements. The hybridization efficiency increases with increasing the DNA concentration, in contrast to preceding studies with ensemble studies.

How Kinesin-1 Utilize the Energy of Nucleotide: The Conformational Changes and Mechanochemical Coupling in the Unidirectional Motion of Kinesin-1

Kinesin-1 is a typical motile molecular motor and the founding member of the kinesin family. The most significant feature in the unidirectional motion of kinesin-1 is its processivity. To realize the fast and processive movement on the microtubule lattice, kinesin-1 efficiently transforms the chemical energy of nucleotide binding and hydrolysis to the energy of mechanical movement. The chemical and mechanical cycle of kinesin-1 are coupled to avoid futile nucleotide hydrolysis. In this paper, the research on the mechanical pathway of energy transition and the regulating mechanism of the mechanochemical cycle of kinesin-1 is reviewed.

Inchworm stepping of Myc-Max heterodimer protein diffusion along DNA

Oncogenic protein Myc serves as a transcription factor to control cell metabolisms. Myc dimerizes via leucine zipper with its associated partner protein Max to form a heterodimer structure, which then binds target DNA sequences to regulate gene transcription. The regulation depends on Myc-Max binding to DNA and searching for target sequences via diffusional motions along DNA. Here, we conduct structure-based molecular dynamics (MD) simulations to investigate the diffusion dynamics of the Myc-Max heterodimer along DNA. We found that the heterodimer protein slides on the DNA in a rotation-uncoupled manner in coarse-grained simulations, as its two helical DNA binding basic regions (BRs) alternate between open and closed conformations via inchworm stepping motions. In such motions, the two BRs of the heterodimer step across the DNA strand one by one, with step sizes reaching about half of a DNA helical pitch length. Atomic MD simulations of the Myc-Max heterodimer in complex with DNA have also been conducted. Hydrogen bond interactions are revealed between the two BRs and two complementary DNA strands, respectively. In the non-specific DNA binding, the BR from Myc shows an onset of stepping on one association DNA strand and starts detaching from the other strand. Overall, our simulation studies suggest that the inchworm stepping motions of the Myc-Max heterodimer can be achieved during the protein diffusion along DNA.

The mechanochemistry of the kinesin-2 KIF3AC heterodimer is related to strain-dependent kinetic properties of KIF3A and KIF3C

KIF3AC is a mammalian neuron-specific kinesin-2 implicated in intracellular cargo transport. It is a heterodimer of KIF3A and KIF3C motor polypeptides which have distinct biochemical and motile properties as engineered homodimers. Single-molecule motility assays show that KIF3AC moves processively along microtubules at a rate faster than expected given the motility rates of the KIF3AA and much slower KIF3CC homodimers. To resolve the stepping kinetics of KIF3A and KIF3C motors in homo- and heterodimeric constructs and determine their transport potential under load, we assayed motor activity using interferometric scattering microscopy and optical trapping. The distribution of stepping durations of KIF3AC molecules is described by a rate (k ₁ = 11 s^-1) without apparent kinetic asymmetry. Asymmetry was also not apparent under hindering or assisting mechanical loads in the optical trap. KIF3AC shows increased force sensitivity relative to KIF3AA yet is more capable of stepping against mechanical load than KIF3CC. Interestingly, the behavior of KIF3C mirrors prior studies of kinesins with increased interhead compliance. Microtubule gliding assays containing 1:1 mixtures of KIF3AA and KIF3CC result in speeds similar to KIF3AC, suggesting the homodimers mechanically impact each other's motility to reproduce the behavior of the heterodimer. Our observations are consistent with a mechanism in which the stepping of KIF3C can be activated by KIF3A in a strain-dependent manner, similar to application of an assisting load. These results suggest that the mechanochemical properties of KIF3AC can be explained by the strain-dependent kinetics of KIF3A and KIF3C.

The temperature dependence of kinesin motor-protein mechanochemistry

Biophysical studies of the mechanochemical cycle of kinesin motors are essential for understanding the mechanism of energy conversion. Here, we report a systematic study of the impact of temperature on velocity and run length of homodimeric Drosophila kinesin-1, homodimeric C. elegans OSM-3 and heterodimeric C. elegans kinesin-II motor proteins using in vitro single-molecule motility assays. Under saturated ATP conditions, kinesin-1 and OSM-3 are fast and processive motors compared to kinesin-II. From in vitro motility assays employing single-molecule fluorescence microscopy, we extracted single-motor velocities and run lengths in a temperature range from 15 °C to 35 °C. Both parameters showed a non-Arrhenius temperature dependence for all three motors, which could be quantitatively modeled using a simplified, two-state kinetic model of the mechanochemistry of the three motors, providing new insights in the temperature dependence of their mechanochemistry.

Collective intracellular cargo transport by multiple kinesins on multiple microtubules

The transport of intracellular organelles is accomplished by groups of molecular motors, such as kinesin, myosin, and dynein. Previous studies have demonstrated that the cooperation between kinesins on a track is beneficial for long transport. However, within crowded three-dimensional (3D) cytoskeletal networks, surplus motors could impair transport and lead to traffic jams of cargos. Comprehensive understanding of the effects of the interactions among molecular motors, cargo, and tracks on the 3D cargo transport dynamics is still lack. In this work, a 3D stochastic multiphysics model is introduced to study the synergistic and antagonistic motions of kinesin motors walking on multiple mircotubules (MTs). Based on the model, we show that kinesins attaching to a common cargo can interact mechanically through the transient forces in their cargo linkers. Under different environmental conditions, such as different MT topologies and kinesin concentrations, the transient forces in the kinesins, the stepping frequency and the binding and unbinding probabilities of kinesins are changed substantially. Therefore, the macroscopic transport properties, specifically the stall force of the cargo, the transport direction at track intersections, and the mean-square displacement (MSD) of the cargo along the MT bundles vary over the environmental conditions. In general, conditions that improve the synergistic motion of kinesins increase the stall force of the cargo and the capability of maintaining the transport. In contrast, the antagonistic motion of kinesins temporarily traps the cargo and slows down the transport. Furthermore, this study predicts an optimal number of kinesins for the cargo transport at MT intersections and along MT bundles.

Momentum-Topology-Induced Optical Pulling Force

We report an ingenious mechanism to obtain robust optical pulling force by a single plane wave via engineering the topology of light momentum in the background. The underlying physics is found to be the topological transition of the light momentum from a usual convex shape to a starlike concave shape in the carefully designed background, such as a photonic crystal structure. The principle and results reported here shed insightful concepts concerning optical pulling, and pave the way for a new class of advanced optical manipulation technique, with potential applications of drug delivery and cell sorting.

Theoretical Analysis of Dynamics of Kinesin Molecular Motors

Kinesin is a typical molecular motor that can step processively on microtubules powered by hydrolysis of adenosine triphosphate (ATP) molecules, playing a critical role in intracellular transports. Its dynamical properties such as its velocity, stepping ratio, run length, dissociation rate, etc. as well as the load dependencies of these quantities have been well documented through single-molecule experimental methods. In particular, the run length shows a dramatic asymmetry with respect to the direction of the load, and the dissociation rate exhibits a slip-catch-slip bond behavior under the backward load. Here, an analytic theory was provided for the dynamics of kinesin motors under both forward and backward loads, explaining consistently and quantitatively the diverse available experimental results.

Additive manufacturing of laminar flow cells for single-molecule experiments

A microfluidic laminar flow cell (LFC) forms an indispensable component in single-molecule experiments, enabling different substances to be delivered directly to the point under observation and thereby tightly controlling the biochemical environment immediately surrounding single molecules. Despite substantial progress in the production of such components, the process remains relatively inefficient, inaccurate and time-consuming. Here we address challenges and limitations in the routines, materials and the designs that have been commonly employed in the field, and introduce a new generation of LFCs designed for single-molecule experiments and assembled using additive manufacturing. We present single- and multi-channel, as well as reservoir-based LFCs produced by 3D printing to perform single-molecule experiments. Using these flow cells along with optical tweezers, we show compatibility with single-molecule experiments including the isolation and manipulation of single DNA molecules either attached to the surface of a coverslip or as freely movable DNA dumbbells, as well as direct observation of protein-DNA interactions. Using additive manufacturing to produce LFCs with versatility of design and ease of production allow experimentalists to optimize the flow cells to their biological experiments and provide considerable potential for performing multi-component single-molecule experiments.

How kinesin waits for ATP affects the nucleotide and load dependence of the stepping kinetics

Conventional kinesin, responsible for directional transport of cellular vesicles, takes multiple nearly uniform 8.2-nm steps by consuming one ATP molecule per step as it walks toward the plus end of the microtubule (MT). Despite decades of intensive experimental and theoretical studies, there are gaps in the elucidation of key steps in the catalytic cycle of kinesin. How the motor waits for ATP to bind to the leading head is controversial. Two experiments using a similar protocol have arrived at different conclusions. One asserts that kinesin waits for ATP in a state with both the heads bound to the MT, whereas the other shows that ATP binds to the leading head after the trailing head detaches. To discriminate between the 2 scenarios, we developed a minimal model, which analytically predicts the outcomes of a number of experimental observable quantities (the distribution of run length, the distribution of velocity [[Formula: see text]], and the randomness parameter) as a function of an external resistive force (F) and ATP concentration ([T]). The differences in the predicted bimodality in [Formula: see text] as a function of F between the 2 models may be amenable to experimental testing. Most importantly, we predict that the F and [T] dependence of the randomness parameters differ qualitatively depending on the waiting states. The randomness parameters as a function of F and [T] can be quantitatively measured from stepping trajectories with very little prejudice in data analysis. Therefore, an accurate measurement of the randomness parameter and the velocity distribution as a function of load and nucleotide concentration could resolve the apparent controversy.

All-atom molecular dynamics simulations reveal how kinesin transits from one-head-bound to two-heads-bound state

Kinesin dimer walks processively along a microtubule (MT) protofilament in a hand-over-hand manner, transiting alternately between one-head-bound (1HB) and two-heads-bound (2HB) states. In 1HB state, one head bound by adenosine diphosphate (ADP) is detached from MT and the other head is bound to MT. Here, using all-atom molecular dynamics simulations we determined the position and orientation of the detached ADP-head relative to the MT-bound head in 1HB state. We showed that in 1HB state when the MT-bound head is in ADP or nucleotide-free state, with its neck linker being undocked, the detached ADP-head and the MT-bound head have the high binding energy, and after adenosine triphosphate (ATP) binds to the MT-bound head, with its neck linker being docked, the binding energy between the two heads is reduced greatly. These results reveal how the kinesin dimer retains 1HB state before ATP binding and how the dimer transits from 1HB to 2HB state after ATP binding. Key residues involved in the head-head interaction in 1HB state were identified.

Resolving kinesin stepping: one head at a time

Kinesins are well known to power diverse long-range transport processes in virtually all eukaryotic cells. The ATP-dependent processive stepping as well as the regulation of kinesin' activity have, thus, been the focus of extensive studies over the past decades. It is widely accepted that kinesin motors can self-regulate their activity by suppressing the catalytic activity of the "heads." The distal random coil at the C terminus, termed "tail domain," is proposed to mediate this autoinhibition; however, a direct regulatory influence of the tail on the processive stepping of kinesin proved difficult to capture. Here, we simultaneously tracked the two distinct head domains in the kinesin-2 motor using dual-color super resolution microscopy (dcFIONA) and reveal for the first time their individual properties during processive stepping. We show that the autoinhibitory wild-type conformation selectively impacts one head in the heterodimer but not the other. Our results provide insights into the regulated kinesin stepping that had escaped experimental scrutiny so far.

A Generalized Kinetic Model for Coupling between Stepping and ATP Hydrolysis of Kinesin Molecular Motors

A general kinetic model is presented for the chemomechanical coupling of dimeric kinesin molecular motors with and without extension of their neck linkers (NLs). A peculiar feature of the model is that the rate constants of ATPase activity of a kinesin head are independent of the strain on its NL, implying that the heads of the wild-type kinesin dimer and the mutant with extension of its NLs have the same force-independent rate constants of the ATPase activity. Based on the model, an analytical theory is presented on the force dependence of the dynamics of kinesin dimers with and without extension of their NLs at saturating ATP. With only a few adjustable parameters, diverse available single molecule data on the dynamics of various kinesin dimers, such as wild-type kinesin-1, kinesin-1 with mutated residues in the NLs, kinesin-1 with extension of the NLs and wild-type kinesin-2, under varying force and ATP concentration, can be reproduced very well. Additionally, we compare the power production among different kinesin dimers, showing that the mutation in the NLs reduces the power production and the extension of the NLs further reduces the power production.

Kinesin and dynein use distinct mechanisms to bypass obstacles

Kinesin-1 and cytoplasmic dynein are microtubule (MT) motors that transport intracellular cargoes. It remains unclear how these motors move along MTs densely coated with obstacles of various sizes in the cytoplasm. Here, we tested the ability of single and multiple motors to bypass synthetic obstacles on MTs in vitro. Contrary to previous reports, we found that single mammalian dynein is highly capable of bypassing obstacles. Single human kinesin-1 motors fail to avoid obstacles, consistent with their inability to take sideways steps on to neighboring MT protofilaments. Kinesins overcome this limitation when working in teams, bypassing obstacles as effectively as multiple dyneins. Cargos driven by multiple kinesins or dyneins are also capable of rotating around the MT to bypass large obstacles. These results suggest that multiplicity of motors is required not only for transporting cargos over long distances and generating higher forces, but also for maneuvering cargos on obstacle-coated MT surfaces.

Plasmonic gold nanoparticles: Optical manipulation, imaging, drug delivery and therapy

Over the past two decades, the development of plasmonic nanoparticle (NPs), especially gold (Au) NPs, is being pursued more seriously in the medical fields such as imaging, drug delivery, and theranostic systems. However, there is no comprehensive review on the effect of the physical and chemical parameters of AuNPs on their plasmonic properties as well as the use of these unique characteristic in medical activities such as imaging and therapeutics. Therefore, in this literature the surface plasmon resonance (SPR) modeling of AuNPs was accurately captured toward precision medicine. Indeed, we investigated the importance of plasmonic properties of AuNPs in optical manipulation, imaging, drug delivery, and photothermal therapy (PTT) of cancerous cells based on their physicochemical properties. Finally, some challenges regarding the commercialization of AuNPs in future medicine such as, cytotoxicity, lack of standards for medical applications, high cost, and time-consuming process were discussed.

Shaft Function of Kinesin-1's α4 Helix in the Processive Movement

INTRODUCTION

Kinesin-1 motor is a molecular walking machine constructed with amino acids. The understanding of how those structural elements play their mechanical roles is the key to the understanding of kinesin-1 mechanism.

METHODS

Using molecular dynamics simulations, we investigate the role of a helix structure, α4 (also called switch-II helix), of kinesin-1's motor domain in its processive movement along microtubule.

RESULTS

Through the analysis of the structure and the interactions between α4 and the surrounding residues in different nucleotide-binding states, we find that, mechanically, this helix functions as a shaft for kinesin-1's motor-domain rotation and, structurally, it is an amphipathic helix ensuring its shaft functioning. The hydrophobic side of α4 consists strictly of hydrophobic residues, making it behave like a lubricated surface in contact with the core β-sheet of kinesin-1's motor domain. The opposite hydrophilic side of α4 leans firmly against microtubule with charged residues locating at both ends to facilitate its positioning onto the intra-tubulin groove.

CONCLUSIONS

The special structural feature of α4 makes for an effective reduction of the conformational work in kinesin-1's force generation process.

Peculiarities of control of erythrocytes moving in an evanescent field

An investigation of the influence of an evanescent wave on the dynamics of motion of erythrocytes in blood plasma is presented. Computer simulation of erythrocytes moving in an evanescent field and experimental demonstration of the forecasted motion substantiate the possibility for control of position of red blood cells in a solution. The range of velocities of transversal motion of erythrocytes due to the action of the optical force of the generated evanescent field is determined as a function of the angle of illumination of a cell by a linearly polarized wave with the azimuth of polarization 45 deg.

The Orphan Kinesin PAKRP2 Achieves Processive Motility via a Noncanonical Stepping Mechanism

Phragmoplast-associated kinesin-related protein 2 (PAKRP2) is an orphan kinesin in Arabidopsis thaliana that is thought to transport vesicles along phragmoplast microtubules for cell plate formation. Here, using single-molecule fluorescence microscopy, we show that PAKRP2 is the first orphan kinesin to exhibit processive plus-end-directed motility on single microtubules as individual homodimers. Our results show that PAKRP2 processivity is achieved despite having an exceptionally long (32 residues) neck linker. Furthermore, using high-resolution nanoparticle tracking, we find that PAKRP2 steps via a hand-over-hand mechanism that includes frequent side steps, a prolonged diffusional search of the tethered head, and tight coupling of the ATP hydrolysis cycle to the forward-stepping cycle. Interestingly, truncating the PAKRP2 neck linker to 14 residues decreases the run length of PAKRP2; thus, the long neck linker enhances the processive behavior. Based on the canonical model of kinesin stepping, such a long neck linker is expected to decrease the processivity and disrupt the coupling of ATP hydrolysis to forward stepping. Therefore, we conclude that PAKRP2 employs a noncanonical strategy for processive motility, wherein a long neck linker is coupled with a slow ATP hydrolysis rate to allow for an extended diffusional search during each step without sacrificing processivity or efficiency.

Walking Forward with Kinesin

Active intracellular transport of organelles relies on the coordinated activities of cytoplasmic dynein and kinesin, ATP-dependent microtubule motor proteins. While axonemal dynein was discovered during the mid-1960s, it was not until the mid-1980s that kinesin was discovered by Ron Vale and colleagues, as reported in 1985. Their research demonstrated that the newly identified protein, isolated from both squid axoplasm and bovine brain, was independently capable of driving microtubule gliding or organelle movement. These findings kicked off rapid progress in the fields of physiology and neuroscience, leading to the identification of the many members of the extended kinesin superfamily, as well as detailed explorations of their biophysical properties, cellular mechanisms of action, and roles in disease.

Structure of a bacterial ATP synthase

ATP synthases produce ATP from ADP and inorganic phosphate with energy from a transmembrane proton motive force. Bacterial ATP synthases have been studied extensively because they are the simplest form of the enzyme and because of the relative ease of genetic manipulation of these complexes. We expressed the Bacillus PS3 ATP synthase in Eschericia coli, purified it, and imaged it by cryo-EM, allowing us to build atomic models of the complex in three rotational states. The position of subunit ε shows how it is able to inhibit ATP hydrolysis while allowing ATP synthesis. The architecture of the membrane region shows how the simple bacterial ATP synthase is able to perform the same core functions as the equivalent, but more complicated, mitochondrial complex. The structures reveal the path of transmembrane proton translocation and provide a model for understanding decades of biochemical analysis interrogating the roles of specific residues in the enzyme.

Force Dependence of Velocity and Run Length of Kinesin-1, Kinesin-2 and Kinesin-5 Family Molecular Motors

Kinesin-1, kinesin-2 and kinesin-5 are three families of a superfamily of motor proteins; which can walk processively on microtubule filaments by hydrolyzing ATP. It was experimentally shown that while the three kinesin dimers show similar feature on the force dependence of velocity, they show rather different features on the force dependence of run length. However, why the three families of kinesins show these rather different features is unclear. Here, we computationally studied the movement dynamics of the three dimers based on our proposed model. The simulated results reproduce well the available experimental data on the force dependence of velocity and run length. Moreover, the simulated results on the velocity and run length for the three dimers with altered neck linker lengths are also in quantitative agreement with the available experimental data. The studies indicate that the three families of kinesins show much similar movement mechanism and the rather different features on the force dependence of run length arise mainly from the difference in rate constants of the ATPase activity and neck linker docking. Additionally, the asymmetric (limping) movement dynamics of the three families of homodimers with and without altered neck linker lengths are studied, providing predicted results.

ATP-Concentration- and Force-Dependent Chemomechanical Coupling of Kinesin Molecular Motors

A model is presented for the chemomechanical coupling of kinesin motors, which proposes that the rate constants of the chemical reaction are independent of the external force. On the basis of the model, we study theoretically the movement dynamics of the motors under varying external force and ATP concentration, such as the forward to backward stepping ratio, velocity, dwell time between two mechanical steps, stall force, and so on. The theoretical results reproduce quantitatively the diverse and even contradictory available single-molecule experimental data for different species of the motors. Furthermore, we study the dependence of the chemomechanical coupling ratio on ATP concentration and external force, with both ATP concentration and external force having large effects on the chemomechanical coupling.

Nonequilibrium Energetics of Molecular Motor Kinesin

Nonequilibrium energetics of single molecule translational motor kinesin was investigated by measuring heat dissipation from the violation of the fluctuation-response relation of a probe attached to the motor using optical tweezers. The sum of the dissipation and work did not amount to the input free energy change, indicating large hidden dissipation exists. Possible sources of the hidden dissipation were explored by analyzing the Langevin dynamics of the probe, which incorporates the two-state Markov stepper as a kinesin model. We conclude that internal dissipation is dominant.