N₂reduction and hydrogenation to ammonia by a molecular iron-potassium complex

Construction and Function of Thiolate-Bridged Diiron NxHy Nitrogenase Model Complexes

ConspectusBiological nitrogen fixation mediated by nitrogenases has garnered significant research interest due to its critical importance to the development of efficient catalysts for mild ammonia synthesis. Although the active center of the most studied FeMo-nitrogenases has been determined to be a complicated [Fe7S9MoC] hetero-multinuclear metal-sulfur cluster known as the FeMo-cofactor, the exact binding site and reduction pathway of N2 remain a subject of debate. Over the past decades, the majority of studies have focused on mononuclear molybdenum or iron centers as potential reaction sites. In stark contrast, cooperative activation of N2 through bi- or multimetallic centers has been largely overlooked and underexplored, despite the renewed interest sparked by recent biochemical and computational studies. Consequently, constructing bioinspired bi- or multinuclear metallic model complexes presents an intriguing yet challenging prospect. In this Account, we detail our long-standing research on the design and synthesis of novel thiolate-bridged diiron complexes as nitrogenase models and their application to chemical simulations of potential biological N2 reduction pathways.Inspired by the structural and electronic features of the potential diiron active center in the belt region of the FeMo-cofactor, we have designed and synthesized a series of new thiolate-bridged diiron nitrogenase model complexes, wherein iron centers with +2 or +3 oxidation states are coordinated by Cp* as carbon-based donors and thiolate ligands as sulfur donors. Through the synergistic interaction between the two iron centers, unstable diazene (NH═NH) species can be trapped to generate the first example of a [Fe2S2]-type complex bearing a cis-μ-η1:η1-NH═NH subunit. Significantly, this species can not only catalyze the reductive N-N bond cleavage of hydrazine to ammonia but also trigger a stepwise reduction sequence NH═NH → [NH2-NH]- → [NH]2-(+NH3) → [NH2]- → NH3. Furthermore, an unprecedented thiolate-bridged diiron μ-nitride featuring a bent Fe-N-Fe moiety was successfully isolated and structurally characterized. Importantly, this diiron μ-nitride can undergo successive proton-coupled electron transfer processes to efficiently release ammonia in the presence of separate protons and electrons and can even be directly hydrogenated using H2 as a combination of protons and electrons for high-yield ammonia formation. Based on combined experimental and computational studies, we proposed two distinct reductive transformation sequences on the diiron centers, which involve a series of crucial NxHy intermediates. Moreover, we also achieved catalytic N2 reduction to silylamines with [Fe2S2]-type complexes by ligand modulation.Our bioinspired diiron cooperative scaffold may provide a suitable model for probing the potential N2 stepwise reduction pathways from the molecular level. Different from the traditional alternating and distal pathways dominated by mononuclear iron or molybdenum complexes, our proposed alternating transformation route based on the diiron centers may not involve the N2H4 intermediate, and the convergence point of the alternating and terminal pathways is imide, not amide. Our research strategy could inform the design and development of new types of bioinspired catalysts for mild and efficient nitrogen reduction in the future.

Iron(I) Complex Bearing an Open-Shell Diazenido Ligand

Low-valent transition-metal diazenido species are important intermediates in transition-metal-mediated dinitrogen reduction reactions. Isolable complexes of the type unanimously feature closed-shell diazenido ligands. Those bearing open-shell diazenido ligands have remained elusive. Herein, we report the synthesis, characterization, and reactivity of a d7 iron(I) complex featuring an open-shell silyldiazenido ligand, [(ICy)Fe(NNSiiPr3)(η2:η2-dvtms)] (1, ICy = 1,3-dicyclohexylimidazole-2-ylidene, dvtms = divinyltetramethyldisiloxane). Complex 1 is prepared in good yield by silylation of the iron(-I)-N2 complex [K(18-crown-6)][(ICy)Fe(N2)(η2:η2-dvtms)] with iPr3SiOTf and has been fully characterized by various spectroscopic methods. Theoretical studies, in combination with characterization data, established an S = 1/2 ground spin-state for 1 that can best be described as a quartet iron(I) center featuring an antiferromagnetically coupled triplet silyldiazenido ligand. The diazenido and alkene ligands in 1 are labile, as indicated by the facile disproportionation reaction of 1 at ambient temperature to transform into the iron(II) bis(diazenido) species [(ICy)(NNSiiPr3)2Fe(dvtms)Fe(NNSiiPr3)2(ICy)] (2) and the iron(0) species [(ICy)Fe(η2:η2-dvtms)] and also the alkene-exchange reaction of 1 with PhCH═CHBC8H14 to form [(ICy)Fe(NNSiiPr3)(η2-trans-PhCH═CHBC8H14)] (3). Complex 1 is light-sensitive. Upon photolysis, it undergoes a SiiPr3 radical-transfer reaction to yield [(ICy)Fe(σ:η2-MeCHSiMe2OSiMe2CH═CHSiiPr3)] (4) and N2. The reactions of 1 with the trityl radical and organic bromides yield iron(II) complexes, which indicates its reducing nature. Moreover, 1 is a weak hydrogen-atom abstractor, as indicated by its inertness toward HSi(SiMe3)3 and cyclohexa-1,4-diene and the low calculated N-H bond dissociation energy (48 kcal/mol) of its corresponding iron(II) iso-hydrazenido species.

Mechanistic Inquisition on the Reduction of C17Si(NH2)2 to NH3: A DFT Study

Activation of molecular nitrogen by silicon-substituted cyclo[18]carbon and its ability to produce the C17Si-(NH2)2 derivative, as the precursor of NH3, has been recently reported. This specific acquisition has piqued an interest to investigate the possibility of NH3 formation with further addition of H2 molecules in the gaseous reaction media. The current investigations reported in this article show that two moles of molecular H2 generate two molecules of NH3 and a C17Si-H2 byproduct from its precursor. The catalyst gets restored by an in situ reaction between some unreacted C17Si-N2 and the byproduct in the media. This reaction also produces the next C17Si-(NH)2 adduct, which restarts the catalytic cycle for NH3 production again.

Engineering Spin Polarization of the Surface-Adsorbed Fe Atom by Intercalating a Transition Metal Atom into the MoS2 Bilayer for Enhanced Nitrogen Reduction

The precise control of spin states in transition metal (TM)-based single-atom catalysts (SACs) is crucial for advancing the functionality of electrocatalysts, yet it presents significant scientific challenges. Using density functional theory (DFT) calculations, we propose a novel mechanism to precisely modulate the spin state of the surface-adsorbed Fe atom on the MoS2 bilayer. This is achieved by strategically intercalating a TM atom into the interlayer space of the MoS2 bilayer. Our results show that these strategically intercalated TM atoms can induce a substantial interfacial charge polarization, thereby effectively controlling the charge transfer and spin polarization on the surface Fe site. In particular, by varying the identity of the intercalated TM atoms and their vacancy filling site, a continuous modulation of the spin states of the surface Fe site from low to medium to high can be achieved, which can be accurately described using descriptors composed of readily accessible intrinsic properties of materials. Using the electrochemical dinitrogen reduction reaction (eNRR) as a prototypical reaction, we discovered a universal volcano-like relation between the tuned spin and the catalytic activity of Fe-based SACs. This finding contrasts with the linear scaling relationships commonly seen in traditional studies and offers a robust new approach to modulating the activity of SACs through interfacial engineering.

Unveiling Cutting-Edge Developments in Electrocatalytic Nitrate-to-Ammonia Conversion

The excessive enrichment of nitrate in the environment can be converted into ammonia (NH3) through electrochemical processes, offering significant implications for modern agriculture and the potential to reduce the burden of the Haber-Bosch (HB) process while achieving environmentally friendly NH3 production. Emerging research on electrocatalytic nitrate reduction (eNitRR) to NH3 has gained considerable momentum in recent years for efficient NH3 synthesis. However, existing reviews on nitrate reduction have primarily focused on limited aspects, often lacking a comprehensive summary of catalysts, reaction systems, reaction mechanisms, and detection methods employed in nitrate reduction. This review aims to provide a timely and comprehensive analysis of the eNitRR field by integrating existing research progress and identifying current challenges. This review offers a comprehensive overview of the research progress achieved using various materials in electrochemical nitrate reduction, elucidates the underlying theoretical mechanism behind eNitRR, and discusses effective strategies based on numerous case studies to enhance the electrochemical reduction from NO3 - to NH3. Finally, this review discusses challenges and development prospects in the eNitRR field with an aim to guide design and development of large-scale sustainable nitrate reduction electrocatalysts.

Chapter 4: A Geological and Chemical Context for the Origins of Life on Early Earth

Within the first billion years of Earth's history, the planet transformed from a hot, barren, and inhospitable landscape to an environment conducive to the emergence and persistence of life. This chapter will review the state of knowledge concerning early Earth's (Hadean/Eoarchean) geochemical environment, including the origin and composition of the planet's moon, crust, oceans, atmosphere, and organic content. It will also discuss abiotic geochemical cycling of the CHONPS elements and how these species could have been converted to biologically relevant building blocks, polymers, and chemical networks. Proposed environments for abiogenesis events are also described and evaluated. An understanding of the geochemical processes under which life may have emerged can better inform our assessment of the habitability of other worlds, the potential complexity that abiotic chemistry can achieve (which has implications for putative biosignatures), and the possibility for biochemistries that are vastly different from those on Earth.

Low-Valent Transition Metalate Anions in Synthesis, Small Molecule Activation, and Catalysis

This review surveys the synthesis and reactivity of low-oxidation state metalate anions of the d-block elements, with an emphasis on contributions reported between 2006 and 2022. Although the field has a long and rich history, the chemistry of transition metalate anions has been greatly enhanced in the last 15 years by the application of advanced concepts in complex synthesis and ligand design. In recent years, the potential of highly reactive metalate complexes in the fields of small molecule activation and homogeneous catalysis has become increasingly evident. Consequently, exciting applications in small molecule activation have been developed, including in catalytic transformations. This article intends to guide the reader through the fascinating world of low-valent transition metalates. The first part of the review describes the synthesis and reactivity of d-block metalates stabilized by an assortment of ligand frameworks, including carbonyls, isocyanides, alkenes and polyarenes, phosphines and phosphorus heterocycles, amides, and redox-active nitrogen-based ligands. Thereby, the reader will be familiarized with the impact of different ligand types on the physical and chemical properties of metalates. In addition, ion-pairing interactions and metal-metal bonding may have a dramatic influence on metalate structures and reactivities. The complex ramifications of these effects are examined in a separate section. The second part of the review is devoted to the reactivity of the metalates toward small inorganic molecules such as H2, N2, CO, CO2, P4 and related species. It is shown that the use of highly electron-rich and reactive metalates in small molecule activation translates into impressive catalytic properties in the hydrogenation of organic molecules and the reduction of N2, CO, and CO2. The results discussed in this review illustrate that the potential of transition metalate anions is increasingly being tapped for challenging catalytic processes with relevance to organic synthesis and energy conversion. Therefore, it is hoped that this review will serve as a useful resource to inspire further developments in this dynamic research field.

Lewis acid catalysed polymerisation of cyclopentenone

A modest structural change of a β-diketiminate-supported aluminium complex leads to dramatic differences in the reactivity towards cyclopentenone. While the bulkier complex efficiently executes Diels Alder transformations the smaller analogue performs unique polymerisation of this substrate. This observation appears to be unprecedented in the chemistry of Lewis acids and cyclic dienophiles as it represents a unique way to polymerise a functionalised olefin.

Dinitrogen cleavage by a dinuclear uranium(iii) complex

Understanding the role of multimetallic cooperativity and of alkali ion-binding in the second coordination sphere is important for the design of complexes that can promote dinitrogen (N2) cleavage and functionalization. Herein, we compare the reaction products and mechanism of N2 reduction of the previously reported K2-bound dinuclear uranium(iii) complex, [K2{[UIII(OSi(OtBu)3)3]2(μ-O)}], B, with those of the analogous dinuclear uranium(iii) complexes, [K(2.2.2-cryptand)][K{UIII(OSi(OtBu)3)3}2(μ-O)], 1, and [K(2.2.2-cryptand)]2[{UIII(OSi(OtBu)3)3}2(μ-O)], 2, where one or two K+ ions have been removed from the second coordination sphere by addition of 2.2.2-cryptand. In this study, we found that the complete removal of the K+ ions from the inner coordination sphere leads to an enhanced reducing ability, as confirmed by cyclic voltammetry studies, of the resulting complex 2, and yields two new species upon N2 addition, namely the U(iii)/U(iv) complex, [K(2.2.2-cryptand)][{UIII(OSi(OtBu)3)3}(μ-O){UIV(OSi(OtBu)3)3}], 3, and the N2 cleavage product, the bis-nitride, terminal-oxo complex, [K(2.2.2-cryptand)]2[{UV(OSi(OtBu)3)3}(μ-N)2{UVI(OSi(OtBu)3)2(κ-O)}], 4. We propose that the formation of these two products involves a tetranuclear uranium-N2 intermediate that can only form in the absence of coordinated alkali ions, resulting in a six-electron transfer and cleavage of N2, demonstrating the possibility of a three-electron transfer from U(iii) to N2. These results give an insight into the relationship between alkali ion binding modes, multimetallic cooperativity and reactivity, and demonstrate how these parameters can be tuned to cleave and functionalize N2.

Mössbauer and Nuclear Resonance Vibrational Spectroscopy Studies of Iron Species Involved in N-N Bond Cleavage

Diketiminate-supported iron complexes are capable of cleaving the strong triple bond of N2 to give a tetra-iron complex with two nitrides (Rodriguez et al., Science, 2011, 334, 780-783). The mechanism of this reaction has been difficult to determine, but a transient green species was observed during the reaction that corresponds to a potential intermediate. Here, we describe studies aiming to identify the characteristics of this intermediate, using a range of spectroscopic techniques, including Mössbauer spectroscopy, electronic absorption spectroscopy, Raman spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and nuclear resonance vibrational spectroscopy (NRVS) complemented by density functional theory (DFT) calculations. We successfully elucidated the nature of the starting iron(II) species and the bis(nitride) species in THF solution, and in each case, THF breaks up the multiiron species. Various observations on the green intermediate species indicate that it has one N2 per two Fe atoms, has THF associated with it, and has NRVS features indicative of bridging N2. Computational models with a formally diiron(0)-N2 core are most consistent with the accumulated data, and on this basis, a mechanism for N2 splitting is suggested. This work shows the power of combining NRVS, Mössbauer, NMR, and vibrational spectroscopies with computations for revealing the nature of transient iron species during N2 cleavage.

Modulating the Active Hydrogen Adsorption on Fe─N Interface for Boosted Electrocatalytic Nitrate Reduction with Ultra-Long Stability

The electrocatalytic reduction of nitrate (NO3 - ) to nitrogen (N2 ) is an environmentally friendly approach for efficient N-cycle management (toward a nitrogen-neutral cycle). However, poor catalyst durability and the competitive hydrogen evolution reaction significantly impede its practical application. Interface-chemistry engineering, utilizing the close relationship between the catalyst surface/interface microenvironment and electron/proton transfer process, has facilitated the development of catalysts with high intrinsic activity and physicochemical durability. This study reports the synthesis of a nitrogen-doped carbon-coated rice-like iron nitride (RL-Fe2 N@NC) electrocatalyst with excellent electrocatalytic nitrate-reduction reaction activity (high N2 selectivity (≈96%) and NO3 - conversion (≈86%)). According to detailed mechanistic investigations by in situ tests and theoretical calculations, the strong hydrogenation ability of iron nitride and enhanced nitrate enrichment of the system synergistically contribute to the rapid hydrogenation of nitrogen-containing species, increasing the intrinsic activity of the catalyst and reducing the occurrence of the competing hydrogen-evolution side reaction. Moreover, RL-Fe2 N@NC shows excellent stability, retaining good NO3 - -to-N2 electrocatalysis activity for more than 40 cycles (one cycle per day). This paper could guide the interfacial design of Fe-based composite nanostructures for electrocatalytic nitrate reduction, facilitating a shift toward nitrogen neutrality.

Formation of a Hexaphosphido Cobalt Complex through P-P Condensation

The reaction between diphosphorus derivatives [(Cl ImDipp )P2 (Dipp)]OTf (1[OTf]) and [(Cl ImDipp )P2 (Dipp)Cl] (1[Cl]) with the cyclotetraphosphido cobalt complex [K(18c-6)][(PHDI)Co(η4 -cyclo-P4 )] (2) leads to the formation of complex [(PHDI)Co{η4 -cyclo-P6 (Dipp)(Cl ImDipp )}] (3), which features an unusual hexaphosphido ligand [Cl ImDipp =4,5-dichloro-1,3-bis(2,6-diisopropylphenyl)imidazol-2-yl, Dipp=2,6-diisopropylphenyl, 18c-6=18-crown-6, PHDI=bis(2,6-diisopropylphenyl)phenanthrene-9,10-diimine]. Complex 3 was obtained as a crystalline material with a moderate yield at low temperature. Upon exposure to ambient temperature, compound 3 slowly transforms into two other compounds, [K(18c-6)][(PHDI)Co(η4 -P7 Dipp)] (4) and [(PHDI)Co{cyclo-P5 (Cl ImDipp )}] (5). The novel complexes 3-5 were characterized using multinuclear NMR spectroscopy and single-crystal X-ray diffraction. To shed light on the formation of these compounds, a proposed mechanism based on 31 P NMR monitoring studies is presented.

Unusual Hydrogenation Reactivities of a Thiolate-Bridged Dicobalt μ-Nitride Featuring a Bent {CoIII-N-CoIII} Core

Transition metal nitrides have received considerable attention owing to their crucial roles in nitrogen fixation and nitrogen atom transfer reactions. Compared to the early and middle transition metals, it is much more challenging to access late transition metal nitrides, especially cobalt in group 9. So far, only a handful of cobalt nitrides have been reported; consequently, their hydrogenation reactivity is largely unexplored. Herein, we present a structurally and spectroscopically well-characterized thiolate-bridged dicobalt μ-nitride [Cp*CoIII(μ-SAd)(μ-N)CoIIICp*] (2) featuring a bent {CoIII(μ-N)CoIII} core. Remarkably, complex 2 can realize not only direct hydrogenation of nitride to amide but also stepwise N-H bond formation from nitride to ammonia. Specifically, 2 can facilely activate dihydrogen (H2) at mild conditions to generate a dicobalt μ-amide [Cp*CoII(μ-SAd)(μ-NH2)CoIICp*] (4) via an unusual mechanism of two-electron oxidation of H2 as proposed by computational studies; in the presence of protons (H+) and electrons, nitride 2 can convert to dicobalt μ-imide [Cp*CoIII(μ-SAd)(μ-NH)CoIIICp*][BPh4] (3[BPh4]) and to CoIICoII μ-amide 4, and finally release ammonia. In contrast to 2, the only other structurally characterized dicobalt μ-nitride Na(THF)4{[(ketguan)CoIII(N3)]2(μ-N)} (ketguan = [(tBu2CN)C(NDipp)2]-, Dipp = 2,6-diisopropylphenyl) (e) that possesses a linear {CoIII(μ-N)CoIII} moiety cannot directly react with H2 or H+. Further in-depth electronic structure analyses shed light on how the varying geometries of the {CoIII(μ-N)CoIII} moieties in 2 and e, bent vs linear, impart their disparate reactivities.

Measuring Metal-Metal Communication in a Series of Ketimide-Bridged [Fe2]6+ Complexes

Reaction of Fe(acac)3 with 3 equiv of Li[N═C(R)Ph] (R = Ph, tBu) results in the formation of the [Fe2]6+ complexes, [Fe2(μ-N═C(R)Ph)2(N═C(R)Ph)4] (R = Ph, 1; tBu, 2), in low to moderate yields. Reaction of FeCl2 with 6 equiv of Li(N═C13H8) (HN═C13H8 = 9-fluorenone imine) results in the formation of [Li(THF)2]2[Fe(N═C13H8)4] (3) in good yield. Subsequent oxidation of 3 with ca. 0.8 equiv of I2 generates the [Fe2]6+ complex, [Fe2(μ-N═C13H8)2(N═C13H8)4] (4), along with free fluorenyl ketazine. Complexes 1, 2, and 4 were characterized by 1H NMR spectroscopy, X-ray crystallography, 57Fe Mössbauer spectroscopy, and SQUID magnetometry. The Fe-Fe distances in 1, 2, and 4 range from 2.803(7) to 2.925(1) Å, indicating that no direct Fe-Fe interaction is present in these complexes. The 57Fe Mössbauer spectra for complexes 1, 2, and 4 are all consistent with the presence of symmetry-equivalent high-spin Fe3+ centers. Finally, all three complexes exhibit a similar degree of antiferromagnetic coupling between the metal centers (J = -26 to -30 cm-1), as ascertained by SQUID magnetometry.

Expanding the Utility of β-Diketiminate Ligands in Heavy Group VI Chemistry of Molybdenum and Tungsten

We report the synthesis of 17 molybdenum and tungsten complexes supported by the ubiquitous BDI ligand framework (BDI = β-diketiminate). The focal entry point is the synthesis of four molybdenum and tungsten(V) BDI complexes of the general formula [MO(BDI^R)Cl₂] [M = Mo, R = Dipp (1); M = W, R = Dipp (2); M = Mo, R = Mes (3); M = W, R = Mes (4)] synthesized by the reaction between MoOCl₃(THF)₂ or WOCl₃(THF)₂ and LiBDI^R. Reactivity studies show that the BDI^Dipp complexes are excellent precursors toward adduct formation, reacting smoothly with dimethylaminopyridine (DMAP) and triethylphosphine oxide (OPEt₃). No reaction with small phosphines has been observed, strongly contrasting the chemistry of previously reported rhenium(V) complexes. Additionally, the complexes 1 and 2 are good precursors for salt metathesis reactions. While 1 can be chemically reduced to the first stable example of a Mo(IV) BDI complex 15, reduction of 2 resulted in degradation of the BDI ligand via a nitrene transfer reaction, leading to MAD (4-((2,6-diisopropylphenyl)imino)pent-2-enide) supported tungsten(V) and tungsten(VI) complexes 16 and 17. All reported complexes have been thoroughly studied by VT-NMR and (heteronuclear) NMR spectroscopy, as well as UV-vis and EPR spectroscopy, IR spectroscopy, and X-ray diffraction analysis.

Progress in the chemistry of molecular actinide-nitride compounds

The chemistry of actinide-nitrides has witnessed significant advances in the last ten years with a large focus on uranium and a few breakthroughs with thorium. Following the early discovery of the first terminal and bridging nitride complexes, various synthetic routes to uranium nitrides have since been identified, although the range of ligands capable of stabilizing uranium nitrides still remains scarce. In particular, both terminal- and bridging-nitrides possess attractive advantages for potential reactivity, especially in light of the recent development of uranium complexes for dinitrogen reduction and functionalization. The first molecular thorium bridged-nitride complexes have also been recently identified, anticipating the possibility of expanding nitride chemistry not only to low-valent thorium, but also to the transuranic elements.

Lewis Acids and Electron-Withdrawing Ligands Accelerate CO Coordination to Dinuclear CuI Compounds

A series of dinuclear molecular copper complexes were prepared and used to model the binding and Lewis acid stabilization of CO in heterogeneous copper CO₂ reduction electrocatalysts. Experimental studies (including measurement of rate and equilibrium constants) and electronic structure calculations suggest that the key kinetic barrier for CO binding may be a σ-interaction between Cu^I and the incoming CO ligand. The rate of CO coordination can be increased upon the addition of Lewis acids or electron-withdrawing substituents on the ligand backbone. Conversely, K_eq for CO coordination can be increased by adding electron density to the metal centers of the compound, consistent with stronger π-backbonding. Finally, the electrochemically measured kinetic results were mapped onto an electrochemical zone diagram to illustrate how these system changes enabled access to each zone.

Converting N2 molecules into NH3 with TiO2/Fe3O4 composite covered with a thin water layer under ambient condition

As ammonia manufacture today require huge energy and very pure hydrogen gas and moreover emit large quantities of CO₂, researches for new ammonia synthesis methods are actively performed. Here, author reports the novel method through which N₂ molecules in air is reduced into ammonia with TiO₂/Fe₃O₄ composite having thin water layer on composite's surface under ambient condition (less than 100 °C and atmospheric pressure). The composites were composed of both nm-sized TiO₂ particles and μm-sized Fe₃O₄ ones. First, composites were held in refrigerator, mainly at that time, N₂ molecules in air adsorbed onto surface of composite. Next, the composite was irradiated with various lights including solar light, 365 nm LED light and tungsten light through thin water layer formed by condensation of water vapour in air. Reliable amount of ammonia was obtained under 5 min's irradiation of solar light or of both 365 m LED light and 500 W tungsten light. This reaction was catalytic reaction promoted by photocatalytic one. In addition, holding in freezer instead of refrigerator provided larger amount of ammonia. Maximum ammonia yield was approximately 18.7 μmol/g 5 min under irradiation of 300 W tungsten light only.

Syntheses, Characterizations, Crystal Structures, and Protonation Reactions of Dinitrogen Chromium Complexes Supported with Triamidoamine Ligands

A novel dinitrogen-dichromium complex, [{Cr(L^Bn)}₂(μ-N₂)] (1), has been prepared from reaction of CrCl₃ with a lithiated triamidoamine ligand (Li₃L^Bn) under dinitrogen. The X-ray crystal structure analysis of 1 revealed that it is composed of two independent dimeric Cr complexes bridged by N₂ in the unit cell. The bridged N-N bond lengths (1.188(4) and 1.185(7) Å) were longer than the free dinitrogen molecule. The elongations of N-N bonds in 1 were also supported by the fact that the ν(N-N) stretching vibration at 1772 cm^-1 observed in toluene is smaller than the free N₂. Complex 1 was identified to be a 5-coordinated high spin Cr(IV) complex by Cr K-edge XANES measurement. The ¹H NMR spectrum and temperature dependent magnetic susceptibility of 1 indicated that complex 1 is in the S = 1 ground state, in which two Cr(IV) ions and unpaired electron spins of the bridging N₂^2- ligand are strongly antiferromagnetically coupled. Reaction of complex 1 with 2.3 equiv of Na or K gave chromium complexes with N₂ between the Cr ion and the respective alkali metal ion, [{CrNa(L^Bn)(N₂)(Et₂O)}₂] (2) and [{CrK(L^Bn)(N₂)}₄(Et₂O)₂] (3), respectively. Furthermore, the complexes 2 and 3 reacted with 15-crown-5 and 18-crown-6 to form the respective crown-ether adducts, [CrNa(L^Bn)(N₂)(15-crown-5)] (4) and [CrK(L^Bn)(N₂)(18-crown-6)] (5). The XANES measurements of complexes 2, 3, 4, and 5 revealed that they are high spin Cr(IV) complexes like complex 1. All complexes reacted with a reducing agent and a proton source to form NH₃ and/or N₂H₄. The yields of these products in the presence of K⁺ were higher than those in the presence of Na⁺. The electronic structures and binding properties of 1, 2, 3, 4, and 5 were evaluated and discussed based on their DFT calculations.

Dinitrogen Complexes of Cobalt(-I) Supported by Rare-Earth Metal-Based Metalloligands

Sequential reactions of heptadentate phosphinoamine LH₃ with rare-earth metal tris-alkyl precursor (Me₃SiCH₂)₃Ln(THF)₂ (Ln = Sc, Lu, Yb, Y, Gd) and a low-valent cobalt complex (Ph₃P)₃CoI afforded rare-earth metal-supported cobalt iodide complexes. Reduction of these iodide complexes under N₂ allowed the isolation of the first series of dinitrogen complexes of Co(-I) featuring dative Co(-I) → Ln (Ln = Sc, Lu, Yb, Y, Gd) bonding interactions. These compounds were characterized by multinuclear NMR spectroscopy, X-ray diffraction analysis, electrochemistry, and computational studies. The correlation of N-N vibrational frequencies with the pK_a of [Ln(H₂O)₆]³⁺ showed that strongest activation of N₂ was achieved with the least Lewis acidic Gd(III) ion. Interestingly, these Ln-Co-N₂ complexes catalyzed silylation of N₂ in the presence of KC₈ and Me₃SiCl with turnover numbers (TONs) up to 16, where the lutetium-supported Co(-I) complex showed the highest activity within the series. The role of the Lewis acidic Ln(III) was crucial to achieve catalytic turnovers and tunable reactivity toward N₂ functionalization.

Dynamic effects on ligand field from rapid hydride motion in an iron(ii) dimer with an S = 3 ground state

Hydride complexes are important in catalysis and in iron-sulfur enzymes like nitrogenase, but the impact of hydride mobility on local iron spin states has been underexplored. We describe studies of a dimeric diiron(ii) hydride complex using X-ray and neutron crystallography, Mössbauer spectroscopy, magnetism, DFT, and ab initio calculations, which give insight into the dynamics and the electronic structure brought about by the hydrides. The two iron sites in the dimer have differing square-planar (intermediate-spin) and tetrahedral (high-spin) iron geometries, which are distinguished only by the hydride positions. These are strongly coupled to give an S total = 3 ground state with substantial magnetic anisotropy, and the merits of both localized and delocalized spin models are discussed. The dynamic nature of the sites is dependent on crystal packing, as shown by changes during a phase transformation that occurs near 160 K. The change in dynamics of the hydride motion leads to insight into its influence on the electronic structure. The accumulated data indicate that the two sites can trade geometries by rotating the hydrides, at a rate that is rapid above the phase transition temperature but slow below it. This small movement of the hydrides causes large changes in the ligand field because they are strong-field ligands. This suggests that hydrides could be useful in catalysis not only due to their reactivity, but also due to their ability to rapidly modulate the local electronic structure and spin states at metal sites.

Screening Carbon-Boron Frustrated Lewis Pairs for Small-Molecule Activation including N2 , O2 , CO, CO2 , CS2 , H2 O and CH4 : A Computational Study

Dinitrogen (N₂ ) activation is particularly challenging under ambient conditions because of its large highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) gap (10.8 eV) and high bond dissociation energy (945 kJ mol^-1 ) of the N≡N triple bond, attracting considerable attention from both experimental and theoretical chemists. However, most effort has focused on metallic systems. In contrast, nitrogen activation by frustrated Lewis pairs (FLPs) has been initiated recently via theoretical calculations. Here we perform density functional theory (DFT) calculations to screen a series of experimentally viable FLPs for small-molecule activation including N₂ , O₂ , CO, CO₂ , CS₂ , H₂ O and CH₄ . In addition, aromaticity is found to play an important role in most of these small-molecule activation. The particularly thermodynamic stabilities of the activation products and low reaction barriers could be a step forward for the development of FLP towards small-molecule activation including N₂ , inviting experimental chemists' verification.

Dinitrogen cleavage and hydrogenation to ammonia with a uranium complex

The Haber-Bosch process produces ammonia (NH₃) from dinitrogen (N₂) and dihydrogen (H₂), but requires high temperature and pressure. Before iron-based catalysts were exploited in the current industrial Haber-Bosch process, uranium-based materials served as effective catalysts for production of NH₃ from N₂. Although some molecular uranium complexes are known to be capable of combining with N₂, further hydrogenation with H₂ forming NH₃ has not been reported to date. Here, we describe the first example of N₂ cleavage and hydrogenation with H₂ to NH₃ with a molecular uranium complex. The N₂ cleavage product contains three uranium centers that are bridged by three imido μ ₂-NH ligands and one nitrido μ ₃-N ligand. Labeling experiments with ¹⁵N demonstrate that the nitrido ligand in the product originates from N₂. Reaction of the N₂-cleaved complex with H₂ or H⁺ forms NH₃ under mild conditions. A synthetic cycle has been established by the reaction of the N₂-cleaved complex with trimethylsilyl chloride. The isolation of this trinuclear imido-nitrido product implies that a multi-metallic uranium assembly plays an important role in the activation of N₂.

Prediction of Three-Metal Cluster Catalysts on Two-Dimensional W2N3 Support with Integrated Descriptors for Electrocatalytic Nitrogen Reduction

In the electrocatalytic nitrogen reduction reaction (NRR), nitrogen (N2) is chemically inert, it is difficult to break the triple bond, and the subsequent protonation step is very challenging. Suitable catalysts with high selectivity and high activity are needed to promote the electrocatalytic NRR. We screen a large number of clusters composed of three metal atoms embedded into a two-dimensional metal nitride, W2N3, with a N vacancy, and calculate the reaction energetics. The VNiCu cluster has the best catalytic activity among all the catalysts proposed so far. The Fe3 and Fe2Co clusters are excellent catalysts as well. In all cases, spin polarization is needed to observe the catalytic effect. We establish the optimal NRR path and confirm that it remains unchanged in the presence of a solvent. We find three groups of descriptors that can well predict the materials' properties and exhibit linear relationships with the NRR limiting potential.

N2-to-NH3 conversion by excess electrons trapped in point vacancies on 5f-element dioxide surfaces

Ammonia (NH₃) is one of the basic chemicals in artificial fertilizers and a promising carbon-free energy storage carrier. Its industrial synthesis is typically realized via the Haber-Bosch process using traditional iron-based catalysts. Developing advanced catalysts that can reduce the N₂ activation barrier and make NH₃ synthesis more efficient is a long-term goal in the field. Most heterogeneous catalysts for N₂-to-NH₃ conversion are multicomponent systems with singly dispersed metal clusters on supporting materials to activate N₂ and H₂ molecules. Herein, we report single-component heterogeneous catalysts based on 5f actinide dioxide surfaces (ThO₂ and UO₂) with oxygen vacancies for N₂-to-NH₃ conversion. The reaction cycle we propose is enabled by a dual-site mechanism, where N₂ and H₂ can be activated at different vacancy sites on the same surface; NH₃ is subsequently formed by H^- migration on the surface via associative pathways. Oxygen vacancies recover to their initial states after the release of two molecules of NH₃, making it possible for the catalytic cycle to continue. Our work demonstrates the catalytic activities of oxygen vacancies on 5f actinide dioxide surfaces for N₂ activation, which may inspire the search for highly efficient, single-component catalysts that are easy to synthesize and control for NH₃ conversion.

Predicting Small Molecule Activation including Catalytic Hydrogenation of Dinitrogen Promoted by a Dual Lewis Acid

For decades, N₂ activation and functionalization have required the use of transition metal complexes. Thus, it is one of the most challenging projects to activate the abundant dinitrogen through metal-free systems under mild conditions. Here, we demonstrate a proof-of-concept study on the catalytic hydrogenation of dinitrogen (with activation energy as low as 15.3 kcal mol^-1 ) initiated by a dual Lewis acid (DLA) via density functional theory (DFT) calculations. In addition, such a DLA could be also used to activate a series of small molecules including carbon dioxide, formaldehyde, N-ethylenemethylamine, and acetonitrile. It is found that aromaticity plays an important role in stabilizing intermediates and products. Our findings provide an alternative approach to N₂ activation and functionalization, highlighting a great potential of DLA for small molecule activation.

Activation and Conversion of Molecular Nitrogen to the Precursor of Ammonia on Silicon Substituted Cyclo[18]Carbon: a DFT Design

Recent synthesis of sp-hybridized cyclo[18]carbon allotrope has attracted immense curiosity. Since then, a generous amount of theoretical studies concerning aromaticity, adsorption, and spectra of the molecule have been performed. However, very few stuides have been carried out concerning its reactivities and catalytic behaviour. In this article, a DFT-based inquisition has been reported regarding the reactivity of Si substituted cyclo[18]carbon molecule towards molecular N₂ . Results show that the Si substituted derivative is effective in producing adducts with molecular nitrogen. Charge calculations and IRC trapping methods indicate that only the Si center of C₁₇ Si and its (HOMO-1) level participate in N₂ addition. The N-adduct so formed, is then found to spontaneously react with molecular H₂ . The addition of two H₂ molecules to the activated nitrogen molecule to give respective amine derivatives have also been studied. The successful generation of the precursor of NH₃ by C₁₇ Si lays a clear emphasis on its potentiality.

Terminal N2 Dissociation in [(PNN)Fe(N2 )]2 (μ-N2 ) Leads to Local Spin-State Changes and Augmented Bridging N2 Activation

Nitrogen fixation at iron centres is a fundamental catalytic step for N₂ utilisation, relevant to biological (nitrogenase) and industrial (Haber-Bosch) processes. This step is coupled with important electronic structure changes which are currently poorly understood. We show here for the first time that terminal dinitrogen dissociation from iron complexes that coordinate N₂ in a terminal and bridging fashion leaves the Fe-N₂ -Fe unit intact but significantly enhances the degree of N₂ activation (Δν≈180 cm^-1 , Raman spectroscopy) through charge redistribution. The transformation proceeds with local spin state change at the iron centre (S= 1 / 2 ${{ 1/2 }}$ →S=³ /₂ ). Further dissociation of the bridging N₂ can be induced under thermolytic conditions, triggering a disproportionation reaction, from which the tetrahedral (PNN)₂ Fe could be isolated. This work shows that dinitrogen activation can be induced in the absence of external chemical stimuli such as reducing agents or Lewis acids.

Interplay between β-Diimino and β-Diketiminato Ligands in Nickel Complexes Active in the Proton Reduction Reaction

Two Ni complexes are reported with κ⁴-P₂N₂ β-diimino (BDI) ligands with the general formula [Ni(XBDI)](BF₄)₂, where BDI is N-(2-(diphenylphosphaneyl)ethyl)-4-((2-(diphenylphosphaneyl)ethyl)imino)pent-2-en-2-amine and X indicates the substituent in the α-carbon intradiimine position, X = H for 1(BF₄)₂ and X = Ph for 2(BF₄)₂. Electrochemical analysis together with UV-vis and NMR spectroscopy in acetonitrile and dimethylformamide (DMF) indicates the conversion of the β-diimino complexes 1²⁺ and 2²⁺ to the negatively charged β-diketiminato (BDK) analogues (1-H)⁺ and (2-H)⁺ via deprotonation in DMF. Moreover, further electrochemical and spectroscopy evidence indicates that the one-electron-reduced derivatives 1⁺ and 2⁺ can also rapidly evolve to the BDK (1-H)⁺ and (2-H)⁺, respectively, via hydrogen gas evolution through a bimolecular homolytic pathway. Finally, both complexes are demonstrated to be active for the proton reduction reaction in DMF at E_app = -1.8 V vs Fc^+/0, being the active species the one-electron-reduced derivative 1-H and 2-H.

Trimetallic clusters in the sumanene bowl for dinitrogen activation

It is of great importance to find catalysts for the nitrogen reduction reaction (NRR) with high stability and reactivity. A series of M₃ clusters (M = Ti, Zr, V, and Nb) supported on sumanene (C₂₁H₁₂) were designed as potential catalysts for the NRR by taking advantage of the high reactivity of trimetallic clusters and the unique geometric and electronic properties of sumanene, a bowl-like organic molecule. Detailed mechanisms of NN bond cleavage on C₂₁H₁₂-M₃ were investigated by DFT calculations and compared with those on bare M₃ clusters. M₃ in the sumanene bowl is very stable with large binding energies, which prohibits the cohesion of M₃ into M₆. In the bowl, M₃ has a (quasi-) equilateral triangle structure with lengthened M-M bonds, which is particularly beneficial to the N₂ transfer process on Ti₃ and V₃ clusters. The N-N bond can be dissociated by both M₃ and C₂₁H₁₂-M₃ clusters without the overall energy barriers. A blurring effect is found in which some geometric and electronic properties of different metal types become similar when M₃ is supported on the substrate. Our work demonstrates that sumanene is a suitable substrate to support M₃ in the activation of N₂ with enhanced stability and maintained a high level of reactivity compared to bare M₃.

Achievements and Perspectives in Metal–Organic Framework-Based Materials for Photocatalytic Nitrogen Reduction

Metal–organic frameworks (MOFs) are coordination polymers with high porosity that are constructed from molecular engineering. Constructing MOFs as photocatalysts for the reduction of nitrogen to ammonia is a newly emerging but fast-growing field, owing to MOFs’ large pore volumes, adjustable pore sizes, controllable structures, wide light harvesting ranges, and high densities of exposed catalytic sites. They are also growing in popularity because of the pristine MOFs that can easily be transformed into advanced composites and derivatives, with enhanced catalytic performance. In this review, we firstly summarized and compared the ammonia detection methods and the synthetic methods of MOF-based materials. Then we highlighted the recent achievements in state-of-the-art MOF-based materials for photocatalytic nitrogen fixation. Finally, the summary and perspectives of MOF-based materials for photocatalytic nitrogen fixation were presented. This review aims to provide up-to-date developments in MOF-based materials for nitrogen fixation that are beneficial to researchers who are interested or involved in this field.

Organometallic μ-Nitridodiiron Complexes in Oxidation States Ranging from (III/III) to (IV/IV)

Iron complexes with nitrido ligands are of interest as molecular analogues of key intermediates during N₂-to-NH₃ conversion in industrial or enzymatic processes. Dinuclear iron complexes with a bridging nitrido unit are mostly known in relatively high oxidation states (III/IV or IV/IV), originating from the decomposition of azidoiron precursors via high-valent Fe≡N intermediates. The use of a tetra-NHC macrocyclic scaffold ligand (NHC = N-heterocyclic carbene) has now allowed for the isolation of a series of organometallic μ-nitridodiiron complexes ranging from the mid-valent Fe^III-N-Fe^III (1) via mixed-valent Fe^III-N-Fe^IV (type 4) to the high-valent Fe^IV-N-Fe^IV (type 5) species that are interconverted at moderate potentials, accompanied by axial ligand binding at the Fe^IV sites. Magnetic measurements and electron paramagnetic resonance spectroscopy showed the homovalent complexes to be diamagnetic and the mixed-valent system to feature an S = 1/2 ground state due to very strong antiferromagnetic coupling. The bonding in the Fe-N-Fe moiety has been further probed by crystallographic structure determination, ⁵⁷Fe Mössbauer and UV-vis spectroscopies, as well as density functional theory computations, which revealed high covalency and nearly identical Fe-N distances across this redox series. The latter has been rationalized in terms of the nonbonding nature of the combination of Fe d_z² atomic orbitals from which electrons are successively removed upon oxidation, and these redox processes are best described as being metal-centered. The tetra-NHC-ligated μ-nitridodiiron series complements a set of related complexes with single-atom μ-oxido and μ-phosphido bridges, but the Fe-N-Fe core exhibits a comparatively high stability over several oxidation states. This promises interesting applications in view of the manifold catalytic uses of μ-nitridodiiron complexes based on macrocyclic N-donor porphinato(2-) or phthalocyaninato(2-) ligands.

Atomic Molybdenum for Synthesis of Ammonia with 50% Faradic Efficiency

The electrochemical dinitrogen (N₂ ) reduction reaction (NRR) under ambient conditions has gained significant interest as an environmentally friendly alternative to the traditional Haber-Bosch process for the synthesis of ammonia (NH₃ ). However, up to now, most of the reported NRR electrocatalysts with satisfactory catalytic activities have been hindered by the large overpotential in N₂ activation. The preparation of highly efficient Mo-based NRR electrocatalyst in acidic electrolytes under ambient conditions is demonstrated here, consisting of stabilized single Mo atoms anchored on holey nitrogen-doped graphene synthesized through a convenient potassium-salt-assisted activation method. At -0.05 V versus a reversible hydrogen electrode (RHE), an electrode consisting of the resultant electrocatalyst immobilized on carbon fiber paper can attain an exceptional Faradaic efficiency of 50.2% and a NH₃ yield rate of 3.6 µg h^-1 mg_cat^-1 with low overpotentials. Density functional theory calculations further unveil that compared to the original graphene without holes, the edge coordinated Mo atoms and the existence of vacancies on holey graphene lower the overpotential of N₂ reduction, thereby promoting the NRR catalytic activity. This work could provide new guidelines for future designs in single-atom catalysis that would be beneficial to ambient N₂ fixation, and replacement of classical synthesis processes that are very energy-intensive.

Sigma/pi Bonding Preferences of Solvated Alkali-Metal Cations to Ditopic Arylmethyl Anions

Arylmethyl anions allow alkali‐metals to bind in a σ‐fashion to the lateral carbanionic centre or a π‐fashion to the aryl ring or in between these extremities, with the trend towards π bonding increasing on descending group 1. Here we review known alkali metal structures of diphenylmethane, fluorene, 2‐benzylpyridine and 4‐benzylpyridine. Next, we synthesise Li, Na, K monomers of these diarylmethyls using polydentate donors PMDETA or Me₆TREN to remove competing oligomerizing interactions, studying the effect that two aromatic rings has on negative charge (de)localisation via NMR, X‐ray crystallographic and DFT studies. Diphenylmethyl and fluorenyl anions maintain C(H)−M interactions regardless of alkali‐metal, although the adjacent arene carbons engage in interactions with larger alkali‐metals. Introducing a nitrogen atom into the ring (at the 2‐ or 4‐position) encourages relocalisation of negative charge away from the deprotonated carbon and onto nitrogen. Phenyl(2‐pyridyl)methyl moves from an enamide formation at one extremity (lithium) to an aza‐allyl formation at the other extremity (potassium), while C‐ or N‐coordination modes become energetically viable for Na and K phenyl(4‐pyridyl)methyl complexes.

A Parent Iron Amido Complex in Catalysis of Ammonia Oxidation

Parent amido complexes are crucial intermediates in ammonia-based transformations. We report a well-defined ferric ammine system [Cp*Fe(1,2-Ph₂PC₆H₄NH)(NH₃)]⁺ ([1-NH₃]⁺), which processes electrocatalytic ammonia oxidation to N₂ and H₂ at a mild potential. Through establishing elementary e^-/H⁺ conversions with the ferric ammine, a formal Fe(IV)-amido species, [1-NH₂]⁺, together with its conjugated Lewis acid, [1-NH₃]²⁺, was isolated and structurally characterized for the first time. Mechanism studies indicated that further oxidation of [1-NH₂]⁺ induces the reaction of the parent amido unit with NH₃. The formation of hydrazine is realized by the non-innocent nature of the phenylamido ligand that facilitates the concerted transfer of one proton and two electrons.

Reactivity of Multimetallic Thorium Nitrides Generated by Reduction of Thorium Azides

Thorium nitrides are likely intermediates in the reported cleavage and functionalization of dinitrogen by molecular thorium complexes and are attractive compounds for the study of multiple bond formation in f-element chemistry, but only one example of thorium nitride isolable from solution was reported. Here, we show that stable multimetallic azide/nitride thorium complexes can be generated by reduction of thorium azide precursors─a route that has failed so far to produce Th nitrides. Once isolated, the thorium azide/nitride clusters, M₃Th═N═Th (M = K or Cs), are stable in solutions probably due to the presence of alkali ions capping the nitride, but their synthesis requires a careful control of the reaction conditions (solvent, temperature, nature of precursor, and alkali ion). The nature of the cation plays an important role in generating a nitride product and results in large structural differences with a bent Th═N═Th moiety found in the K-bound nitride as a result of a strong K-nitride interaction and a linear arrangement in the Cs-bound nitride. Reactivity studies demonstrated the ability of Th nitrides to cleave CO in ambient conditions yielding CN^-.

A radical mechanism for C–H bond cross-coupling and N2 activation catalysed by β-diketiminate iron complexes

Density functional theory calculations and electronic structure analyses reveal a radical mechanism with spin-crossovers for C–H bond cross-coupling and N2 activation catalysed by β-diketiminate iron complexes.

Computational Screening of Single Transition−metal Atoms Anchored to g−C9N4 as Catalysts for N2 Reduction to NH3

Electrocatalytic nitrogen reduction reaction (NRR) is considered to be the most desirable strategy for ammonia production, but still faces many challenges in terms of high activity and high selectivity. Based...

A thiolate-bridged FeIVFeIV μ-nitrido complex and its hydrogenation reactivity toward ammonia formation

Iron nitrides are key intermediates in biological nitrogen fixation and the industrial Haber-Bosch process, used to form ammonia from dinitrogen. However, the proposed successive conversion of nitride to ammonia remains elusive. In this regard, the search for well-described multi-iron nitrido model complexes and investigations on controlling their reactivity towards ammonia formation have long been of great challenge and importance. Here we report a well-defined thiolate-bridged Fe^IVFe^IV μ-nitrido complex featuring an uncommon bent Fe-N-Fe moiety. Remarkably, this complex shows excellent reactivity toward hydrogenation with H₂ at ambient conditions, forming ammonia in high yield. Combined experimental and computational studies demonstrate that a thiolate-bridged Fe^IIIFe^III μ-amido complex is a key intermediate, which is generated through an unusual two-electron oxidation of H₂. Moreover, ammonia production was also realized by treating this diiron μ-nitride with electrons and water as a proton source.

Cation assisted binding and cleavage of dinitrogen by uranium complexes

N2 binding affinity decreases markedly in a series of isostructural U(iii)–alkali ions complexes with increasing cation size. N2 binding is undetectable in the Cs analogue, but the first example of cesium-assisted N2 cleavage to bis-nitride was observed at ambient condition.