Rhodium-catalyzed intermolecular C-H silylation of arenes with high steric regiocontrol

Intermolecular C-H silylations of arenes and heteroarenes with mono-, bis-, and tris(trimethylsiloxy)hydrosilanes: control of silane redistribution under operationally diverse approaches

Efficient catalytic protocols for C-H silylations of arenes and heteroarenes with sterically and electronically different hydrosiloxysilanes are disclosed. The silylations are catalyzed by a well-defined Rh-complex (1 mol%), derived from [Rh(1,5-hexadiene)Cl]2 and a bulky BINAP type ligand. This catalyst not only promotes C-Si bond formation affording the desired products in up to 95% isolated yield, but also can suppress the silane redistribution side reactions of HSiMe2(OTMS). The protocol can also be applied for the C-H silylations of more reactive HSiMe(OTMS)2 with a much lower catalyst loading (0.25 mol%) and even with sterically demanding HSi(OTMS)3. The steric bulk of the arene substituent and hydrosiloxysilane is a major factor in determining the regioselectivity and electronic effect as secondary. The current method can be performed under operationally diverse conditions: with/without a hydrogen scavenger or solvent.

Ligand-enabled ruthenium-catalyzed meta-C-H alkylation of (hetero)aromatic carboxylic acids

Carboxylates are ideal directing groups because they are widely available, readily cleavable and excellent linchpins for diverse follow-up reactions. However, their use in meta-selective C-H functionalizations remains a substantial unmet catalytic challenge. Herein, we report the ruthenium-catalyzed meta-C-H alkylation of aromatic carboxylic acids with various functionalized alkyl halides. A bidentate N-ligand increases the electron density at the metal center of ortho-benzoate ruthenacycles to the extent that single-electron reductions of alkyl halides can take place. The subsequent addition of alkyl radicals is exclusively directed to the position para to the CAr-Ru bond, i.e., meta to the carboxylate group. The resulting catalytic meta-C-H alkylation extends to a wide range of (hetero)aromatic carboxylic acids including benzofused five-membered ring heteroarenes but no pyridine derivatives in combination with secondary/tertiary alkyl halides, including fluorinated derivatives. It also allows site-selective C5-H alkylation of 1-naphthoic acids. The products are shown to be synthetic hubs en route to meta-alkylated aryl ketones, nitriles, amides, esters and other functionalized products.

From Quaternary Carbon to Tertiary C(sp3)-Si and C(sp3)-Ge Bonds: Decyanative Coupling of Malononitriles with Chlorosilanes and Chlorogermanes Enabled by Ni/Ti Dual Catalysis

Transition-metal-catalyzed C-Si/Ge cross-coupling offers promising avenues for the synthesis of organosilanes/organogermanes, yet it is fraught with long-standing challenges. A Ni/Ti-catalyzed strategy is reported here, allowing the use of disubstituted malononitriles as tertiary C(sp3) coupling partners to couple with chlorosilanes and chlorogermanes, respectively. This method enables the catalytic cleavage of the C(sp3)-CN bond of the quaternary carbon followed by the formation of C(sp3)-Si/C(sp3)-Ge bonds from ubiquitously available starting materials. The efficiency and generality are showcased by a broad scope for both of the coupling partners, therefore holding the potential to synthesize structurally diverse quaternary organosilanes and organogermanes that were difficult to access previously.

Access to C(sp3) borylated and silylated cyclic molecules: hydrogenation of corresponding arenes and heteroarenes

This paper presents a simple and cost-effective hydrogenation method for synthesizing a myriad of cycloalkanes and saturated heterocycles bearing boryl or silyl substituents. The catalyst used are heterogeneous, readily available, bench stable, and recyclable. Also demonstrated is the application of the method to compounds that possess both boryl and silyl groups. When combined with Ir-catalyzed sp2 C-H borylation, such hydrogenations offer a two-step complementary alternative to direct sp3 C-H borylations that can suffer selectivity and reactivity issues. Of practical value to the community, complete stereochemical analyses of reported borylated compounds that were never fully characterized are reported herein.

Sequential ortho-/meta-C-H functionalizations of N-tosyl-benzamides for the synthesis of polyfunctionalized arenes

Selective one-pot sequential ortho-/meta-C-H functionalizations provided highly desirable polyfunctionalized arenes. Starting from readily available carboxylic acid derivatives, the concomitant formation of C-O and C-halogen bonds was achieved under mild reaction conditions (12 examples, up to 75% yield). The utility of the products was illustrated with post-functionalization reactions and Metiglinid synthesis.

Rhodium-Catalyzed Enantioselective Formal [4+1] Cyclization of Benzyl Alcohols and Benzaldimines: Facile Access to Silicon-Stereogenic Heterocycles

The carbon-to-silicon switch in formation of bioactive sila-heterocycles with a silicon-stereogenic center has garnered significant interest in drug discovery. However, metal-catalyzed synthesis of such scaffolds is still in its infancy. Herein, a rhodium-catalyzed enantioselective formal [4+1] cyclization of benzyl alcohols and benzaldimines has been realized by enantioselective difunctionalization of a secondary silane reagent, affording chiral-at-silicon cyclic silyl ethers and sila-isoindolines, respectively. Mechanistic studies reveal a dual role of the rhodium-hydride catalyst. The coupling system proceeds via rhodium-catalyzed enantio-determining dehydrogenative OH silylation of the benzyl alcohol or hydrosilylation of the imine to give an enantioenriched silyl ether or silazane intermediate, respectively. The same rhodium catalyst also enables subsequent intramolecular cyclative C-H silylation directed by the pendent Si-H group. Experimental and DFT studies have been conducted to explore the mechanism of the OH bond silylation of benzyl alcohol, where the Si-O reductive elimination from a Rh(III) hydride intermediate has been established as the enantiodetermining step.

The Essence in Selectivity of Copper-Mediated Intermolecular Nucleophilic Substitution of a meta C-H Bond in 2-Methyl-N-methoxyaniline: A Theoretical Study

The detailed mechanism for NHC-Cu(I)-catalyzed intermolecular nucleophilic substitution of the C-H bonds at aniline (2-methyl-N-methoxyaniline) was studied via DFT methods to reveal the essence of the selectivity. Calculations revealed that the meta C-H functionalization proceeds via two nucleophilic attacks on the aromatic ring rather than a one-step meta C-H substitution to give the experimentally observed major product. The reaction is initiated by activation of the substrate via oxidative addition with an NHC-Cu(I) catalyst, through which an umpolung occurs at the ring. From the activated intermediate, methoxyl group transfer to benzyl forms a resting state, while a nucleophile can attack the ortho position of benzyl to form a more stable intermediate. The nucleophile group can then transfer to the meta position by a 1,2-Wagner-Meerwein rearrangement to form the final product through a proton shuttle. In contrast, other transfer processes affording ortho- or para-substituted products encounter higher activation barriers. This work investigates the relationship of product selectivity with the umpolung of the aromatic ring, as well as the priority of a nucleophilic attack at the ortho position of the aromatic, 1,2-Wagner-Meerwein rearrangement from the ortho-substituted intermediate, and proton shuttle from the meta-substituted intermediate.

Deoxyfluorination of phenols for chemoselective 18F-labeling of peptides

The challenge of forming C-18F bonds is often a bottleneck in the development of new 18F-labeled tracer molecules for noninvasive functional imaging studies using positron emission tomography (PET). Nucleophilic aromatic substitution is the most widely employed reaction to functionalize aromatic substrates with the radioactive fluorine-18 but its scope is restricted to arenes containing electron-withdrawing substituents. Furthermore, many protic functional groups are incompatible with basic fluoride anions. Peptide substrates, which are highly desirable targets for PET molecular imaging, are particularly challenging to label with fluorine-18 because they are densely functionalized and sensitive to high temperatures and basic conditions. To expand the utility of nucleophilic aromatic substitution with fluorine-18, we describe two complementary procedures for the radiodeoxyfluorination of bench-stable and easy-to-access phenols that ensure rapid access to densely functionalized electron-rich and electron-poor 18F-aryl fluorides. The first procedure details the synthesis of an 18F-synthon and its subsequent ligation to the cysteine residue of Arg-Gly-Asp-Cys in 10.5 h from commercially available starting materials (189-min radiosynthesis). The second procedure describes the incorporation of commercially available CpRu(Fmoc-tyrosine)OTf into a fully protected peptide Lys-Met-Glu-(CpRu-Tyr)-Leu via solid-phase peptide synthesis and subsequent ruthenium-mediated uronium deoxyfluorination with fluorine-18 followed by deprotection, accomplished within 7 d (116-min radiosynthesis). Both radiolabeling methods are highly chemoselective and have conveniently been automated using commercially available radiosynthesis equipment so that the procedures described can be employed for the synthesis of peptide-based PET probes for in vivo imaging studies according to as low as reasonably achievable (ALARA) principles.

A tautomerized ligand enabled meta selective C-H borylation of phenol

Remote meta selective C-H functionalization of aromatic compounds remains a challenging problem in chemical synthesis. Here, we report an iridium catalyst bearing a bidentate pyridine-pyridone (PY-PYRI) ligand framework that efficiently catalyzes this meta selective borylation reaction. We demonstrate that the developed concept can be employed to introduce a boron functionality at the remote meta position of phenols, phenol containing bioactive and drug molecules, which was an extraordinary challenge. Moreover, we have demonstrated that the method can also be applied for the remote C6 borylation of indole derivatives including tryptophan that was the key synthetic precursor for the total synthesis of Verruculogen and Fumitremorgin A alkaloids. The inspiration of this catalytic concept was started from the O-Si secondary interaction, which by means of several more detailed control experiments and detailed computational investigations revealed that an unprecedented Bpin shift occurs during the transformation of iridium bis(boryl) complex to iridium tris(boryl) complex, which eventually control the remote meta selectivity by means of the dispersion between the designed ligand and steering silane group.

Transition-Metal-Catalyzed Silylation and Borylation of C-H Bonds for the Synthesis and Functionalization of Complex Molecules

The functionalization of C-H bonds in organic molecules containing functional groups has been one of the holy grails of catalysis. One synthetically important approach to the diverse functionalization of C-H bonds is the catalytic silylation or borylation of C-H bonds, which enables a broad array of downstream transformations to afford diverse structures. Advances in both undirected and directed methods for the transition-metal-catalyzed silylation and borylation of C-H bonds have led to their rapid adoption in early-, mid-, and late-stage of the synthesis of complex molecules. In this Review, we review the application of the transition-metal-catalyzed silylation and borylation of C-H bonds to the synthesis of bioactive molecules, organic materials, and ligands. Overall, we aim to provide a picture of the state of art of the silylation and borylation of C-H bonds as applied to the synthesis and modification of diverse architectures that will spur further application and development of these reactions.

Disilane-bridged architectures: an emerging class of molecular materials

Disilanes are organosilicon compounds that contain saturated Si-Si bonds. The structural characteristics of Si-Si single bonds resemble those of C-C single bonds, but their electronic structure is more similar to that of C[double bond, length as m-dash]C double bonds, as Si-Si bonds have a higher HOMO energy level. These organosilicon compounds feature unique intramolecular σ electron delocalization, low ionization potentials, polarizable electronic structure, and σ-π interaction. It has been demonstrated that the employment of disilane units (Si-Si) is a versatile and effective approach for finely adjusting the photophysical properties of organic materials in both solution and solid states. In this review, we present and discuss the structure, properties, and relationships of novel σ-π-conjugated hybrid architectures with saturated Si-Si σ bonds. The application of disilane-bridged σ-conjugated compounds as optoelectronic materials, multifunctional solid-state emitters, CPL, and non-linear optical and stimuli-responsive materials is also reviewed.

Divergent total syntheses of ITHQ-type bis-β-carboline alkaloids by regio-selective formal aza-[4 + 2] cycloaddition and late-stage C-H functionalization

We herein report the first total syntheses of several bis-β-carboline alkaloids, picrasidines G, S, R, and T, and natural product-like derivatives in a divergent manner. Picrasidines G, S, and T feature an indolotetrahydroquinolizinium (ITHQ) skeleton, while picrasidine R possesses a 1,4-diketone linker between two β-carboline fragments. The synthesis of ITHQ-type bis-β-carboline alkaloids could be directly achieved by a late-stage regio-selective aza-[4 + 2] cycloaddition of vinyl β-carboline alkaloids, suggesting that this remarkable aza-[4 + 2] cycloaddition might be involved in the biosynthetic pathway. Computational studies revealed that such aza-[4 + 2] cycloaddition is a stepwise process and explained the unique regioselectivity (ΔΔG = 3.77 kcal mol-1). Moreover, the successful application of iridium-catalyzed C-H borylation on β-carboline substrates enabled the site-selective C-8 functionalization for efficient synthesis and structural diversification of this family of natural products. Finally, concise synthesis of picrasidine R by the thiazolium-catalyzed Stetter reaction was also accomplished.

Dual photoredox nickel-catalyzed silylation of aryl/heteroaryl bromides using hydrosilanes

Dual Ni and Ir catalysis enables the preparation of arylsilanes having a (TMS)3Si substituent from the corresponding aryl bromides and (TMS)3SiH at 30 °C using visible-light irradiation. This protocol avoids strong bases, high temperature and air and moisture sensitive silyl reagents, providing the expected arylsilanes in moderate to good yields. The reaction was shown to proceed through a silyl radical, likely generated by hydrogen atom abstraction from (TMS)3SiH by a bromide radical.

Controlling Reactivity and Selectivity in the Nondirected C-H Activation of Arenes with Palladium

ConspectusAromatic structures are widespread motifs throughout organic chemistry, and C-H activation has been recognized as a major tool for enabling their sustainable and efficient functionalization. Through C-H activation, arenes can be modified without the need for prefunctionalization, leading to inherent atom- and step-economic advantages over traditional methods. However, for the development of synthetically useful methods, several hurdles have to be overcome. The strength of C-H bonds necessitates the development of sufficiently reactive catalysts, while the presence of multiple C-H bonds within a substrate poses challenges in terms of site-selectivity. Traditionally these challenges have been addressed by substrate control. By attaching different directing groups (DGs), the reactivity of the respective arene was significantly enhanced and the DG guided the metal in close proximity to specific C-H bonds, resulting in high site-selectivity. However, the introduction and removal of the DG add additional steps to the synthetic sequence, and the scope of the reaction is limited to a specific substrate class. The development of complementary nondirected methods that can be applied to a broad range of arenes without the necessity to carry a specific functional group that coordinates to Pd (referred to as simple arenes) is therefore highly desirable. However, the intrinsically lower reactivity of such substrates and the absence of a selectivity-determining DG pose significant challenges that can be solved only by the development of highly efficient catalysts. Consequently, the field of nondirected C-H activation, especially with respect to Pd-catalyzed methods, remained comparatively underdeveloped when we initiated our research program in 2017. At that time, state-of-the-art methods required the arene to be used in large excess, precluding its use in late-stage functionalization. Since organopalladium species are among the most versatile synthetic intermediates, we realized that developing a system, which can effectively and selectively activate C-H bonds in simple arenes with the arene as the limiting reagent, would be a powerful tool in synthetic organic chemistry. This account summarizes our groups' research toward the development and application of catalytic systems offering this desired reactivity and focuses explicitly on Pd-catalyzed nondirected C-H functionalization reactions of arenes, where the arene is employed as a limiting reagent. After an introduction that summarizes the state of Pd-catalyzed C-H activation of arenes before 2017 and the associated challenges, experimental and mechanistic details about the development of the first arene-limited, nondirected C-H functionalization of simple arenes with palladium will be discussed. This reactivity was enabled by the identification and combination of two complementary ligands, an N-heterocycle and an amino acid-derived ligand. Afterward we will discuss the expansion of this dual-ligand approach to further arene-limited transformations. Finally, we describe two methodologies that originated from the observations we made during our studies, namely, the late-stage deuteration of simple arenes and a highly selective olefination method that uses noncovalent interactions to induce meta selectivity.

Photocatalytic C-Si Bond Formations Using Pentacoordinate Silylsilicates as Silyl Radical Precursors: Synthetic Tricks Using Old Reagents

A visible-light-induced photocatalytic C-Si formation strategy has been disclosed by uncovering the reactivity of Martin's spirosilane-derived pentacoordinate silylsilicates as silyl radical precursors. The hydrosilylation of a broad spectrum of alkenes and alkynes, as well as the C-H silylation of heteroarenes, has been demonstrated. Remarkably, Martin's spirosilane was stable and could be recovered via a simple workup process. Furthermore, the reaction proceeded well using water as the solvent or low-energy green LEDs as an alternative energy source.

Electrochemical reactor dictates site selectivity in N-heteroarene carboxylations

Pyridines and related N-heteroarenes are commonly found in pharmaceuticals, agrochemicals and other biologically active compounds1,2. Site-selective C-H functionalization would provide a direct way of making these medicinally active products3-5. For example, nicotinic acid derivatives could be made by C-H carboxylation, but this remains an elusive transformation6-8. Here we describe the development of an electrochemical strategy for the direct carboxylation of pyridines using CO2. The choice of the electrolysis setup gives rise to divergent site selectivity: a divided electrochemical cell leads to C5 carboxylation, whereas an undivided cell promotes C4 carboxylation. The undivided-cell reaction is proposed to operate through a paired-electrolysis mechanism9,10, in which both cathodic and anodic events play critical roles in altering the site selectivity. Specifically, anodically generated iodine preferentially reacts with a key radical anion intermediate in the C4-carboxylation pathway through hydrogen-atom transfer, thus diverting the reaction selectivity by means of the Curtin-Hammett principle11. The scope of the transformation was expanded to a wide range of N-heteroarenes, including bipyridines and terpyridines, pyrimidines, pyrazines and quinolines.

Tailor-Made Synthesis of Hydrosilanols, Hydrosiloxanes, and Silanediols Catalyzed by di-Silyl Rhodium(III) and Iridium(III) Complexes

Siloxanes and silanols containing Si-H units are important building blocks for the synthesis of functionalized siloxane materials, and their synthesis is a current challenge. Herein, we report the selective synthesis of hydrosilanols, hydrosiloxanes, and silanodiols depending on the nature of the catalysts and the silane used. Two neutral ({MCl[SiMe2(o-C6H4PPh2)]2}; M = Rh, Ir) and two cationic ({M[SiMe2(o-C6H4PPh2)]2(NCMe)}[BArF4]; M = Rh, Ir) have been synthesized and their catalytic behavior toward hydrolysis of secondary silanes has been described. Using the iridium complexes as precatalysts and diphenylsilane as a substrate, the product obtained is diphenylsilanediol. When rhodium complexes are used as precatalysts, it is possible to selectively obtain silanediol, hydrosilanol, and hydrosiloxane depending on the catalysts (neutral or cationic) and the silane substituents.

Charge-controlled Pd catalysis enables the meta-C–H activation and olefination of arenes

The regioselective C-H activation of arenes remains one of the most promising techniques for accessing highly important functionalized motifs. Such functionalizations can generally be achieved through directed and non-directed processes. The directed approach requires a covalently attached directing group (DG) on the substrate to induce reactivity and selectivity and therefore intrinsically leaves a functional group at the point of attachment within the molecule, even after the tailored DG has been removed. Conversely, non-directed methods typically suffer from regioselectivity issues, especially for unbiased substrates. Herein, we report a unique approach that employs weak charge-charge and charge-dipole interactions to enable the meta-selective activation and olefination of arenes to address these challenges in Pd catalysis. The charged moiety can easily be converted to uncharged simple arenes by hydrogenation or cross-coupling. In-depth mechanistic studies prove that the charge is responsible for the observed selectivity. We expect our studies to be generalizable and thereby enable further regioselective transformations.

Organothianthrenium salts: synthesis and utilization

Organothianthrenium salts are a class of compounds containing a positively charged sulfur atom and a neutral sulfur atom. Over the past years, organothianthrenium salts have been emerging as attractive precursors for a myriad of transformations to forge new C-C and C-X bonds due to their unique structural characteristics and chemical behaviors. The use of the thianthrenation strategy selectively transforms C-H, C-O, and other chemical bonds into organothianthrenium salts in a predictable manner, providing a straightforward alternative for regioselective functionalizations for arenes, alkenes, alkanes, alcohols, amines and so on through diverse reaction mechanisms under mild conditions. In this review, the preparation of different organothianthrenium salts is summarized, including aryl, alkenyl and alkyl thianthrenium salts. Moreover, the utilization of organothianthrenium salts in different catalytic processes and their synthetic potentials are also discussed.

3-Alkyl-2-pyridyl Directing Group-Enabled C2 Selective C-H Silylation of Indoles and Pyrroles via an Iridium Catalyst

An iridium-catalyzed, directing group-enabled site selective intra- and intermolecular silylation of indoles and pyrroles with hydrosilanes has been developed under ligand-free conditions. Fine-tuning of the removable 3-alkyl-2-pyridyl directing group was found to be crucial for achieving high yields for C2-silylated indole and pyrrole products. Moreover, the scalability was demonstrated, and further transformations of the silylation products were achieved.

Metathesis between E-C(spn ) and H-C(sp3 ) σ-Bonds (E=Si, Ge; n=2, 3) on an Osmium-Polyhydride

The silylation of a phosphine of OsH6 (Pi Pr3 )2 is performed via net-metathesis between Si-C(spn ) and H-C(sp3 ) σ-bonds (n=2, 3). Complex OsH6 (Pi Pr3 )2 activates the Si-H bond of Et3 SiH and Ph3 SiH to give OsH5 (SiR3 )(Pi Pr3 )2 , which yield OsH4 {κ1 -P,η2 -SiH-[i Pr2 PCH(Me)CH2 SiR2 H]}(Pi Pr3 ) and R-H (R=Et, Ph), by displacement of a silyl substituent with a methyl group of a phosphine. Such displacement is a first-order process, with activation entropy consistent with a rate determining step occurring via a highly ordered transition state. It displays selectivity, releasing the hydrocarbon resulting from the rupture of the weakest Si-substituent bond, when the silyl ligand bears different substituents. Accordingly, reactions of OsH6 (Pi Pr3 )2 with dimethylphenylsilane, and 1,1,1,3,5,5,5-heptamethyltrisiloxane afford OsH5 (SiR2 R')(Pi Pr3 )2 , which evolve into OsH4 {κ1 -P,η2 -GeH-[i Pr2 PCH(Me)CH2 SiR2 H]}(Pi Pr3 ) (R=Me, OSiMe3 ) and R'-H (R'=Ph, Me). Exchange reaction is extended to Et3 GeH. The latter reacts with OsH6 (Pi Pr3 )2 to give OsH5 (GeEt3 )(Pi Pr3 )2 , which loses ethane to form OsH4 {κ1 -P,η2 -GeH-[i Pr2 PCH(Me)CH2 GeEt2 H]}(Pi Pr3 ).

Enantioselective Intermolecular C-H Silylation of Heteroarenes for the Synthesis of Acyclic Si-Stereogenic Silanes

Intermolecular C-H silylation for the synthesis of acyclic silanes bearing a silicon-stereogenic center in one enantiomeric form remains unknown to date. Herein, we report the first enantioselective intermolecular C-H silylation of heteroarenes for the synthesis of acyclic silicon-stereogenic heteroarylsilanes. This process undergoes a rhodium-catalyzed direct intermolecular dehydrogenative Si-H/C-H cross-coupling, giving access to a variety of acyclic heteroarylated silicon-stereogenic monohydrosilanes, including bis-Si-stereogenic silanes, in decent yields with excellent chemo-, regio-, and stereo-control, which significantly enlarge the chemical space of the optically active silicon-stereogenic monohydrosilanes.

meta-Allylation of Arenes via Ruthenium-Catalyzed Cross-Dehydrogenative Coupling

A successful example of oxidative meta-dehydrogenative allylation of arenes with alkenes has been developed using Ru(PPh₃)₃Cl₂ as a catalyst and DTBP as an oxidant. In the allylation process, pyrimidines, pyrazoles, and purines, found widely in nucleosides, were effective auxiliary groups. Gram-scale experiments took place smoothly under optimized conditions. Mechanistic studies indicated that ruthenium-catalyzed meta-dehydrogenative allylation was a free-radical process. The allylation process developed herein provides an efficient and practical strategy to prepare versatile meta-allylated arenes.

Looking deep into C-H functionalization: the synthesis and application of cyclopentadienyl and related metal catalysts

Metal catalyzed C-H functionalization offers a versatile platform for methodology development and a wide variety of reactions now exist for the chemo- and site-selective functionalization of organic molecules. Cyclopentadienyl-metal (CpM) complexes of transition metals and their correlative analogues have found widespread application in this area, and herein we highlight several key applications of commonly used transition-metal Cp-type catalysts. In addition, an understanding of transition metal Cp-type catalyst synthesis is important, particularly where modifications to the catalyst structure are required for different applications, and a summary of this aspect is given.

Development of Chiral Ligands for the Transition-Metal-Catalyzed Enantioselective Silylation and Borylation of C-H Bonds

Enantioselective reactions that install functional groups at the positions of unactivated C-H bonds can be envisioned to produce intermediates for the synthesis of the active ingredients in pharmaceuticals and agrochemicals directly from simple feedstocks. Among these C-H bond functionalization reactions, those that form carbon-silicon (C-Si) and carbon-boron (C-B) bonds have been pursued because the products of these reactions can be converted to those containing a wide range of functional groups and because compounds containing silicon and boron possess unique properties that can be valuable for medicinal and materials chemistry. Although the silylation and borylation of C-H bonds have undergone extensive development during the past two decades, enantioselective versions of these reactions were not known until a few years ago. In this Minireview, we present the rapid development of enantioselective silylation and borylation of C-H bonds, with an emphasis on the design and development of the types of chiral ligands needed to achieve these reactions and an intention to inspire an expansion of these types of transformations.

A Perspective on Late-Stage Aromatic C-H Bond Functionalization

Late-stage functionalization of C-H bonds (C-H LSF) can provide a straightforward approach to the efficient synthesis of functionalized complex molecules. However, C-H LSF is challenging because the C-H bond must be functionalized in the presence of various other functional groups. In this Perspective, we evaluate aromatic C-H LSF on the basis of four criteria─reactivity, chemoselectivity, site-selectivity, and substrate scope─and provide our own views on current challenges as well as promising strategies and areas of growth going forward.

Rhodium hydride enabled enantioselective intermolecular C–H silylation to access acyclic stereogenic Si–H

The tremendous success of stereogenic carbon compounds has never ceased to inspire researchers to explore the potentials of stereogenic silicon compounds. Intermolecular C–H silylation thus represents the most versatile and straightforward strategy to construct C–Si bonds, however, its enantioselective variant has been scarcely reported to date. Herein we report a protocol that allows for the enantioselective intermolecular C–H bond silylation, leading to the construction of a wide array of acyclic stereogenic Si–H compounds under simple and mild reaction conditions. Key to the success is (1) a substrate design that prevents the self-reaction of prochiral silane and (2) the employment of a more reactive rhodium hydride ([Rh]-H) catalyst as opposed to the commonly used rhodium chloride ([Rh]-Cl) catalyst. This work unveils opportunities in converting simple arenes into value-added stereogenic silicon compounds.

Construction of chiral organosilicon compounds could have implications in photophysical, biological, and chemical fields, as silicon is isoelectronic with carbon, and can mimic carbon atoms while providing slightly different properties. Here the authors present an intermolecular, enantioselective C–H silylation of heterocycles via rhodium catalysis.

Remote steric control for undirected meta-selective C-H activation of arenes

Regioselective functionalization of arenes remains a challenging problem in organic synthesis. Steric interactions are often used to block sites adjacent to a given substituent, but they do not distinguish the remaining remote sites. We report a strategy based on remote steric control, whereby a roof-like ligand protects the distant para site in addition to the ortho sites, and thereby enables selective activation of meta carbon-hydrogen (C-H) bonds in the absence of ortho or para substituents. We demonstrate this concept for iridium-catalyzed meta-selective borylation of various monosubstituted arenes, including complex drug molecules. This strategy has the potential to expand the toolbox of C-H bond functionalization to previously nondifferentiable reaction sites.

Inorganometallics (Transition Metal-Metalloid Complexes) and Catalysis

While the formation and breaking of transition metal (TM)-carbon bonds plays a pivotal role in the catalysis of organic compounds, the reactivity of inorganometallic species, that is, those involving the transition metal (TM)-metalloid (E) bond, is of key importance in most conversions of metalloid derivatives catalyzed by TM complexes. This Review presents the background of inorganometallic catalysis and its development over the last 15 years. The results of mechanistic studies presented in the Review are related to the occurrence of TM-E and TM-H compounds as reactive intermediates in the catalytic transformations of selected metalloids (E = B, Si, Ge, Sn, As, Sb, or Te). The Review illustrates the significance of inorganometallics in catalysis of the following processes: addition of metalloid-hydrogen and metalloid-metalloid bonds to unsaturated compounds; activation and functionalization of C-H bonds and C-X bonds with hydrometalloids and bismetalloids; activation and functionalization of C-H bonds with vinylmetalloids, metalloid halides, and sulfonates; and dehydrocoupling of hydrometalloids. This first Review on inorganometallic catalysis sums up the developments in the catalytic methods for the synthesis of organometalloid compounds and their applications in advanced organic synthesis as a part of tandem reactions.

Three-Component Ruthenium-Catalyzed meta-C-H Alkylation of Phenol Derivatives

Herein, we realized the multicomponent reactions of phenol derivatives via a six-membered cycloruthenated intermediate for the first time. This strategy exhibited good substrate suitability and functional group tolerance with various phenol derivatives and provided a potential synthetic drug approach. Mechanistic studies showed that a radical might be involved in this process. In addition, the meta alkylated phenol was obtained by further removal of the directing group.

A direct method to access various functional arylalkoxysilanes by Rh-catalysed intermolecular C–H silylation of alkoxysilanes

Efficient protocols for intermolecular C–H silylations of unactivated arenes and heteroarenes with HMe₂SiOEt are disclosed. The silylations are catalysed by a Rh-complex (0.5 mol%) derived from commercially available [Rh(coe)₂Cl]₂ and (S,S)-Ph-BPE in the presence of cyclohexene at 100 °C, furnishing desired arylethoxydimethylsilanes up to 99% yield. The regioselectivity is mainly affected by the steric bulk of the substituents in arenes and by electronic effects as an ancillary factor. Mechanistic study revealed that the mono-hydrido dimeric Rh-complex, [Rh₂(Ph-BPE)₂(μ-H)(μ-Cl)], is an active catalytic intermediate, which further suppresses the formation of redistribution byproducts in the silylation. Preliminary results show that the current protocol can be extended to double C–H silylations affording bis-silylated arenes and is applicable to the silylation of HMeSi(OEt)₂ to deliver the corresponding (aryl)SiMe(OEt)₂.

The control of alkoxysilane redistribution enables the direct access of functional arylalkoxysilanes by Rh-catalyzed C–H silylations.

Construction of a Protoberberine Alkaloid Skeleton via the Palladium-Catalyzed α-Arylation-Amide Formation Cascade

In this work, we report the strategy of one-pot synthesis of protoberberine alkaloid derivatives via palladium-catalyzed cascade α-arylation and cyclization, which can afford the target molecules in moderate to excellent isolated yields using commercially available raw materials under solvent-free conditions. This protocol provides an efficient and convenient path to multisubstituted protoberberine derivatives. In addition, it can directly afford natural alkaloids.

Merging Iridium-Catalyzed C-H Borylations with Palladium-Catalyzed Cross-Couplings Using Triorganoindium Reagents

A versatile and efficient method to prepare borylated arenes furnished with alkyl, alkenyl, alkynyl, aryl, and heteroaryl functional groups is developed by merging Ir-catalyzed C-H borylations (CHB) with a chemoselective palladium-catalyzed cross-coupling of triorganoindium reagents (Sarandeses-Sestelo coupling) with aryl halides bearing a boronic ester substituent. Using triorganoindium cross-coupling reactions to introduce unsaturated moieties enables the synthesis of borylated arenes that would be difficult to access through the direct application of the CHB methodology. The sequential double catalyzed procedure can be also performed in one vessel.

Palladium-Catalyzed ortho-C(sp2)-H Silylation of Aromatic Ketones Using an Aminooxyamide Auxiliary

A palladium-catalyzed direct and selective ortho-C(sp²)-H silylation of aromatic ketones has been achieved using an aminooxyamide auxiliary. The reaction tolerates various orth-, meta-, and para- substituents on the aromatic ring and can be applied to thiophenyl and vinyl ketones. The ortho-C(sp²)-H bond was monosilylated selectively in comparison with other aromatic C-H bonds, benzyl or allylic C(sp³)-H bonds, and acidic α-C(sp³)-H bonds. The aminooxyamide auxiliary can be easily installed and readily removed after the silylation reaction. The resulting ortho-silyl aromatic ketone derivatives are potentially useful building blocks for organic synthesis.

A directive Ni catalyst overrides conventional site selectivity in pyridine C-H alkenylation

Achieving the transition metal-catalysed pyridine C3-H alkenylation, with pyridine as the limiting reagent, has remained a long-standing challenge. Previously, we disclosed that the use of strong coordinating bidentate ligands can overcome catalyst deactivation and provide Pd-catalysed C3 alkenylation of pyridines. However, this strategy proved ineffective when using pyridine as the limiting reagent, as it required large excesses and high concentrations to achieve reasonable yields, which rendered it inapplicable to complex pyridines prevalent in bioactive molecules. Here we report that a bifunctional N-heterocyclic carbene-ligated Ni-Al catalyst can smoothly furnish C3-H alkenylation of pyridines. This method overrides the intrinsic C2 and/or C4 selectivity, and provides a series of C3-alkenylated pyridines in 43-99% yields and up to 98:2 C3 selectivity. This method not only allows a variety of pyridine and heteroarene substrates to be used as the limiting reagent, but is also effective for the late-stage C3 alkenylation of diverse complex pyridine motifs in bioactive molecules.

Predictable site-selective functionalization: Promoter group assisted para-halogenation of N-substituted heteroaromatics under metal-free condition

Herein, regioselective para-C-H halogenation of N-pyrimidyl (hetero)aromatics through S_EAr (electrophilic aromatic substitution) type reaction is disclosed. S_EAr type reaction has been utilized for the C5-bromination of indolines (para-selective) with N-bromosuccinimide under metal and additive-free conditions in good to excellent yields. The developed methodology is also applicable for iodination and challenging chlorination. The pyrimidyl group is identified as a reactivity tuner that also controls the regioselectivity. The present method is also applicable for selective halogenation of aniline, pyridine, indole, oxindole, pyrazole, tetrahydroquinoline, isoquinoline, and carbazole. DFT studies such as Fukui nucleophilicity and natural charge maps also support the observed p-selectivity. Post-functionalization of the title compound into the corresponding arylated, olefinated, and dihalogenated products is achieved in a one-pot, two-step fashion. Late-stage C-H bromination was also executed on drug/natural molecules (harmine, etoricoxib, clonidine, and chlorzoxazone) to demonstrate the applicability of the developed protocol.

Theoretical Design of a Catalyst with Both High Activity and Selectivity in C-H Borylation

Improving both the activity and selectivity of the C-H borylation reaction is currently a hot research topic but also a challenge. In this regard, we suggest a multistrategy combining directing group, coordination unsaturated metal center, and cationic character. Based on Reek's catalyst, we designed a new unsaturated cationic catalyst (1) featuring a directing group for C-H borylation. The calculated free energy barrier of C-H activation is only 7.2 kcal/mol, indicating that the cationic catalyst has higher activity than the original neutral catalyst in this process. Moreover, the comparison suggests that the ortho-C-H borylation pathway is more favorable than the meta and para pathways. The catalyst deconstructions are further performed and prove that the ortho-selectivity is attributed to hydrogen-bonding interactions between the directing group and the substrate, although the ortho site is sterically and electronically unfavorable.