Cubic Fe-bearing majorite synthesized at 18-25 GPa and 1000 °C: implications for element transport, subducted slab rheology and diamond formation

The chemistry and mineralogy of slabs subducted into lower mantle control slab rheology and impact the deep volatile cycle. It is known that the metamorphism of little-altered oceanic crust results in eclogite rocks with subequal proportions of garnet and clinopyroxene. With increasing pressure, these minerals react to stabilize pyrope-rich tetragonal majoritic garnet. However, some eclogites contain higher proportions of omphacitic clinopyroxene, caused by Na- and Si-rich metasomatism on the ocean floor or during subduction. The mineralogy of such eclogites is expected to evolve differently. Here, we discuss the results of the crystallization products of omphacitic glass at ~ 18 and ~ 25 GPa and 1000 °C to simulate P-T regimes of cold subduction. The full characterization of the recovered samples indicates evidence of crystallization of Na-, Si-rich cubic instead of tetragonal majorite. This cubic majorite can incorporate large amounts of ferric iron, promoting redox reactions with surrounding volatile-bearing fluids and, ultimately, diamond formation. In addition, the occurrence of cubic majorite in the slab would affect the local density, favoring the continued buoyancy of the slab as previously proposed by seismic observations. Attention must be paid to omphacitic inclusions in sublithospheric diamonds as these might have experienced back-transformation from the HP isochemical cubic phase.

Unique evidence of fluid alteration in the Kakowa (L6) ordinary chondrite

Meteorites preserve evidence of processes on their parent bodies, including alteration, metamorphism, and shock events. Here we show that the Kakowa (L6) ordinary chondrite (OC) preserves both shock-melt veins and pockets of detrital grains from a brecciated and altered object, including corundum, albite, silica, fayalite, forsterite, and margarite in a Pb- and Fe-rich matrix. Preservation of the observed mineralogy and texture requires a sequence of at least two impacts: first, a high-velocity collision formed the shock melt veins containing the high-pressure minerals ringwoodite, wadsleyite, majorite, and albitic jadeite; later, a low-velocity impact formed fractures and filled them with the detrital material. Oxygen and Pb isotope ratios suggest an OC origin for these detrital minerals. Although fluid alteration is common in carbonaceous chondrites, the discovery of margarite with an OC oxygen isotopic signature is novel. Kakowa extends both the impact and alteration history of L6 ordinary chondrites in general.

Formation, preservation and extinction of high-pressure minerals in meteorites: temperature effects in shock metamorphism and shock classification

The goal of classifying shock metamorphic features in meteorites is to estimate the corresponding shock pressure conditions. However, the temperature variability of shock metamorphism is equally important and can result in a diverse and heterogeneous set of shock features in samples with a common overall shock pressure. In particular, high-pressure (HP) minerals, which were previously used as a solid indicator of high shock pressure in meteorites, require complex pressure-temperature-time (P-T-t) histories to form and survive. First, parts of the sample must be heated to melting temperatures, at high pressure, to enable rapid formation of HP minerals before pressure release. Second, the HP minerals must be rapidly cooled to below a critical temperature, before the pressure returns to ambient conditions, to avoid retrograde transformation to their low-pressure polymorphs. These two constraints require the sample to contain large temperature heterogeneities, e.g. melt veins in a cooler groundmass, during shock. In this study, we calculated shock temperatures and possible P-T paths of chondritic and differentiated mafic-ultramafic rocks for various shock pressures. These P-T conditions and paths, combined with observations from shocked meteorites, are used to constrain shock conditions and P-T-t histories of HP-mineral bearing samples. The need for rapid thermal quench of HP phases requires a relatively low bulk-shock temperature and therefore moderate shock pressures below ~ 30 GPa, which matches the stabilities of these HP minerals. The low-temperature moderate-pressure host rock generally shows moderate shock-deformation features consistent with S4 and, less commonly, S5 shock stages. Shock pressures in excess of 50 GPa in meteorites result in melt breccias with high overall post-shock temperatures that anneal out HP-mineral signatures. The presence of ringwoodite, which is commonly considered an indicator of the S6 shock stage, is inconsistent with pressures in excess of 30 GPa and does not represent shock conditions different from S4 shock conditions. Indeed, ringwoodite and coexisting HP minerals should be considered as robust evidence for moderate shock pressures (S4) rather than extreme shock (S6) near whole-rock melting.

Ultrafast olivine-ringwoodite transformation during shock compression

Meteorites from interplanetary space often include high-pressure polymorphs of their constituent minerals, which provide records of past hypervelocity collisions. These collisions were expected to occur between kilometre-sized asteroids, generating transient high-pressure states lasting for several seconds to facilitate mineral transformations across the relevant phase boundaries. However, their mechanisms in such a short timescale were never experimentally evaluated and remained speculative. Here, we show a nanosecond transformation mechanism yielding ringwoodite, which is the most typical high-pressure mineral in meteorites. An olivine crystal was shock-compressed by a focused high-power laser pulse, and the transformation was time-resolved by femtosecond diffractometry using an X-ray free electron laser. Our results show the formation of ringwoodite through a faster, diffusionless process, suggesting that ringwoodite can form from collisions between much smaller bodies, such as metre to submetre-sized asteroids, at common relative velocities. Even nominally unshocked meteorites could therefore contain signatures of high-pressure states from past collisions.

Meteorites from space often include denser polymorphs of their minerals, providing records of past hypervelocity collisions. An olivine mineral crystal was shock-compressed by a high-power laser, and its transformation into denser ringwoodite was time-resolved using an X-ray free electron laser.

Petrology and mineralogy of the Viñales meteorite, the latest fall in Cuba

The new Cuban chondrite, Viñales, fell on February first, 2019 at Pinar del Rio, northwest of Cuba (22°37'10″N, 83°44'34″W). A total of about 50-100 kg of the meteorite were collected and the masses of individual samples are in a range 2-1100 g. Two polished thin sections were studied by optical microscope, Raman spectroscopy and electron microprobe analysis in this study. The meteorite mainly consists of olivine (Fa24.6), low-Ca pyroxene (Fs20.5), and troilite and Fe-Ni metal, with minor amounts of feldspar (Ab82.4-84.7). Three poorly metamorphosed porphyritic olivine-pyroxene and barred olivine chondrules are observed. The homogeneous chemical compositions and petrographic textures indicate that Viñales is a L6 chondrite. The Viñales has fresh black fusion crust with layered structure, indicating it experienced a high temperature of ∼1650°C during atmospheric entry. Black shock melt veins with width of 100-600 μm are pervasive in the Viñales and olivine, bronzite, and metal phases are dominate minerals of the shock melt vein. The shock features of major silicate minerals suggest a shock stage S3, partly S4, and the shock pressure could be >10 GPa.

Shock-induced olivine-ringwoodite and plagioclase-maskelynite transformations in Bursa L6 chondrite: A Raman and ATR-FTIR spectroscopic study

Olivine-ringwoodite and plagioclase-maskelynite transformation mechanisms in the Bursa L6 chondrite were determined by Raman and Attenuated Total Reflectance (ATR)-Fourier Transform Infrared (FTIR) spectroscopic techniques. Forsterite composition was estimated to be 75% by using Raman and IR correlation data. Possible high impact shock pressure for Bursa meteorite was found to be at least 64.9 GPa. Besides, based on the olivine doublet (820 and 852 cm^-1) and Full Width at Half Maximum data (~20 and ~60 cm^-1, respectively) for maskelynite (509 and 580 cm^-1) observed in the Raman spectrum, we assigned the shock stage of this meteorite as at least S5, for the first time. Moreover, previously reported hypervelocity impact experiments also supported this assignment.

Multimodal x-ray and electron microscopy of the Allende meteorite

Multimodal microscopy that combines complementary nanoscale imaging techniques is critical for extracting comprehensive chemical, structural, and functional information, particularly for heterogeneous samples. X-ray microscopy can achieve high-resolution imaging of bulk materials with chemical, magnetic, electronic, and bond orientation contrast, while electron microscopy provides atomic-scale spatial resolution with quantitative elemental composition. Here, we combine x-ray ptychography and scanning transmission x-ray spectromicroscopy with three-dimensional energy-dispersive spectroscopy and electron tomography to perform structural and chemical mapping of an Allende meteorite particle with 15-nm spatial resolution. We use textural and quantitative elemental information to infer the mineral composition and discuss potential processes that occurred before or after accretion. We anticipate that correlative x-ray and electron microscopy overcome the limitations of individual imaging modalities and open up a route to future multiscale nondestructive microscopies of complex functional materials and biological systems.

High pressure minerals in the Château-Renard (L6) ordinary chondrite: implications for collisions on its parent body

We report the first discoveries of high-pressure minerals in the historical L6 chondrite fall Château-Renard, based on co-located Raman spectroscopy, scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy and electron backscatter diffraction, electron microprobe analysis, and transmission electron microscopy (TEM) with selected-area electron diffraction. A single polished section contains a network of melt veins from ~40 to ~200 μm wide, with no cross-cutting features requiring multiple vein generations. We find high-pressure minerals in veins greater than ~50 μm wide, including assemblages of ringwoodite + wadsleyite, ringwoodite + wadsleyite + majorite-pyrope_ss, and ahrensite + wadsleyite. In association with ahrensite + wadsleyite at both SEM and TEM scale, we find a sodic pyroxene whose Raman spectrum is indistinguishable from that of jadeite but whose composition and structure are those of omphacite. We discuss constraints on the impact record of this meteorite and the L-chondrites in general.

Si-Disordering in MgAl2O4-Spinel under High P-T Conditions, with Implications for Si-Mg Disorder in Mg2SiO4-Ringwoodite

A series of Si-bearing MgAl2O4-spinels were synthesized at 1500–1650 °C and 3–6 GPa. These spinels had SiO2 contents of up to ~1.03 wt % and showed a substitution mechanism of Si4+ + Mg2+ = 2Al3+. Unpolarized Raman spectra were collected from polished single grains, and displayed a set of well-defined Raman peaks at ~610, 823, 856 and 968 cm−1 that had not been observed before. Aided by the Raman features of natural Si-free MgAl2O4-spinel, synthetic Si-free MgAl2O4-spinel, natural low quartz, synthetic coesite, synthetic stishovite and synthetic forsterite, we infer that these Raman peaks should belong to the SiO4 groups. The relations between the Raman intensities and SiO2 contents of the Si-bearing MgAl2O4-spinels suggest that under some P-T conditions, some Si must adopt the M-site. Unlike the SiO4 groups with very intense Raman signals, the SiO6 groups are largely Raman-inactive. We further found that the Si cations primarily appear on the T-site at P-T conditions ≤~3–4 GPa and 1500 °C, but attain a random distribution between the T-site and M-site at P-T conditions ≥~5–6 GPa and 1630–1650 °C. This Si-disordering process observed for the Si-bearing MgAl2O4-spinels suggests that similar Si-disordering might happen to the (Mg,Fe)2SiO4-spinels (ringwoodite), the major phase in the lower part of the mantle transition zone of the Earth and the benchmark mineral for the very strong shock stage experienced by extraterrestrial materials. The likely consequences have been explored.

A new high-pressure form of Mg2SiO4 highlighting diffusionless phase transitions of olivine

High-pressure polymorphism of olivine (α-phase of Mg₂SiO₄) is of particular interest for geophysicists aiming to understand the structure and dynamics of the Earth’s interior because of olivine’s prominent abundance in the upper mantle. Therefore, natural and synthetic olivine polymorphs have been actively studied in the past half century. Here, we report a new high-pressure polymorph, the ε*-phase, which was discovered in a heavily shocked meteorite. It occurs as nanoscale lamellae and has a topotaxial relationship with the host ringwoodite (γ-phase of Mg₂SiO₄). Olivine in the host rock entrapped in a shock-induced melt vein initially transformed into polycrystalline ringwoodite through a nucleation and growth mechanism. The ringwoodite grains then coherently converted into the ε*-phase by shear transformation during subsequent pressure release. This intermediate metastable phase can be formed by all Mg₂SiO₄ polymorphs via a shear transformation mechanism. Here, we propose high-pressure transformations of olivine that are enhanced by diffusionless processes, not only in shocked meteorites but also in thick and cold lithosphere subducting into the deep Earth.

Time-resolved diffraction of shock-released SiO2 and diaplectic glass formation

Understanding how rock-forming minerals transform under shock loading is critical for modeling collisions between planetary bodies, interpreting the significance of shock features in minerals and for using them as diagnostic indicators of impact conditions, such as shock pressure. To date, our understanding of the formation processes experienced by shocked materials is based exclusively on ex situ analyses of recovered samples. Formation mechanisms and origins of commonly observed mesoscale material features, such as diaplectic (i.e., shocked) glass, remain therefore controversial and unresolvable. Here we show in situ pump-probe X-ray diffraction measurements on fused silica crystallizing to stishovite on shock compression and then converting to an amorphous phase on shock release in only 2.4 ns from 33.6 GPa. Recovered glass fragments suggest permanent densification. These observations of real-time diaplectic glass formation attest that it is a back-transformation product of stishovite with implications for revising traditional shock metamorphism stages.

Our understanding of shock metamorphism and thus the collision of planetary bodies is limited by a dependence on ex situ analyses. Here, the authors perform in situ analysis on shocked-produced densified glass and show that estimates of impactor size based on traditional techniques are likely inflated.

Evidence of cross-cutting and redox reaction in Khatyrka meteorite reveals metallic-Al minerals formed in outer space

We report on a fragment of the quasicrystal-bearing CV3 carbonaceous chondrite Khatyrka recovered from fine-grained, clay-rich sediments in the Koryak Mountains, Chukotka (Russia). We show higher melting-point silicate glass cross-cutting lower melting-point Al-Cu-Fe alloys, as well as unambiguous evidence of a reduction-oxidation reaction history between Al-Cu-Fe alloys and silicate melt. The redox reactions involve reduction of FeO and SiO₂ to Fe and Fe-Si metal, and oxidation of metallic Al to Al₂O₃, occurring where silicate melt was in contact with Al-Cu-Fe alloys. In the reaction zone, there are metallic Fe and Fe-Si beads, aluminous spinel rinds on the Al-Cu-Fe alloys, and Al₂O₃ enrichment in the silicate melt surrounding the alloys. From this and other evidence, we demonstrate that Khatyrka must have experienced at least two distinct events: first, an event as early as 4.564 Ga in which the first Al-Cu-Fe alloys formed; and, second, a more recent impact-induced shock in space that led to transformations of and reactions between the alloys and the meteorite matrix. The new evidence firmly establishes that the Al-Cu-Fe alloys (including quasicrystals) formed in outer space in a complex, multi-stage process.

High-pressure minerals in eucrite suggest a small source crater on Vesta

High-pressure minerals in meteorites are important records of shock events that have affected the surfaces of planets and asteroids. A widespread distribution of impact craters has been observed on the Vestan surface. However, very few high-pressure minerals have been discovered in Howardite-Eucrite-Diogenite (HED) meteorites. Here we present the first evidence of tissintite, vacancy-rich clinopyroxene, and super-silicic garnet in the eucrite Northwest Africa (NWA) 8003. Combined with coesite and stishovite, the presence of these high-pressure minerals and their chemical compositions reveal that solidification of melt veins in NWA 8003 began at a pressure of >~10 GPa and ceased when the pressure dropped to <~8.5 GPa. The shock temperature in the melt veins exceeded 1900 °C. Simulation results show that shock events that create impact craters of ~3 km in diameter (subject to a factor of 2 uncertainty) are associated with sufficiently high pressures to account for the occurrence of the high-pressure minerals observed in NWA 8003. This indicates that HED meteorites containing similar high-pressure minerals should be observed more frequently than previously thought.

Discovery of natural MgSiO3 tetragonal garnet in a shocked chondritic meteorite

MgSiO3 tetragonal garnet, which is the last of the missing phases of experimentally predicted high-pressure polymorphs of pyroxene, has been discovered in a shocked meteorite. The garnet is formed from low-Ca pyroxene in the host rock through a solid-state transformation at 17 to 20 GPa and 1900° to 2000°C. On the basis of the degree of cation ordering in its crystal structure, which can be deduced from electron diffraction intensities, the cooling rate of the shock-induced melt veins from ~2000°C was estimated to be higher than 10(3)°C/s. This cooling rate sets the upper bound for the shock-temperature increase in the bulk meteorite at ~900°C.

Ultrafast growth of wadsleyite in shock-produced melts and its implications for early solar system impact processes

We observed micrometer-sized grains of wadsleyite, a high-pressure phase of (Mg,Fe)(2)SiO(4,) in the recovery products of a shock experiment. We infer these grains crystallized from shock-generated melt over a time interval of <1 micros, the maximum time over which our experiment reached and sustained pressure sufficient to stabilize this phase. This rapid crystal growth rate (approximately 1 m/s) suggests that, contrary to the conclusions of previous studies of the occurrence of high-pressure phases in shock-melt veins in strongly shocked meteorites, the growth of high-pressure phases from the melt during shock events is not diffusion-controlled. Another process, such as microturbulent transport, must be active in the crystal growth process. This result implies that the times necessary to crystallize the high-pressure phases in shocked meteorites may correspond to shock pressure durations achieved on impacts between objects 1-5 m in diameter and not, as previously inferred, approximately 1-5 km in diameter. These results may also provide another pathway for syntheses, via shock recovery, of some high-value, high-pressure phases.

Evidence for fractional crystallization of wadsleyite and ringwoodite from olivine melts in chondrules entrained in shock-melt veins

Peace River is one of the few shocked members of the L-chondrites clan that contains both high-pressure polymorphs of olivine, ringwoodite and wadsleyite, in diverse textures and settings in fragments entrained in shock-melt veins. Among these settings are complete olivine porphyritic chondrules. We encountered few squeezed and flattened olivine porphyritic chondrules entrained in shock-melt veins of this meteorite with novel textures and composition. The former chemically unzoned (Fa(24-26)) olivine porphyritic crystals are heavily flattened and display a concentric intergrowth with Mg-rich wadsleyite of a very narrow compositional range (Fa(6)-Fa(10)) in the core. Wadsleyite core is surrounded by a Mg-poor and chemically stark zoned ringwoodite (Fa(28)-Fa(38)) belt. The wadsleyite-ringwoodite interface denotes a compositional gap of up to 32 mol % fayalite. A transmission electron microscopy study of focused ion beam slices in both regions indicates that the wadsleyite core and ringwoodite belt consist of granoblastic-like intergrowth of polygonal crystallites of both ringwoodite and wadsleyite, with wadsleyite crystallites dominating in the core and ringwoodite crystallites dominating in the belt. Texture and compositions of both high-pressure polymorphs are strongly suggestive of formation by a fractional crystallization of the olivine melt of a narrow composition (Fa(24-26)), starting with Mg-rich wadsleyite followed by the Mg-poor ringwoodite from a shock-induced melt of olivine composition (Fa(24-26)). Our findings could erase the possibility of the resulting unrealistic time scales of the high-pressure regime reported recently from other shocked L-6 chondrites.

Timescales of shock processes in chondritic and martian meteorites

The accretion of the terrestrial planets from asteroid collisions and the delivery to the Earth of martian and lunar meteorites has been modelled extensively. Meteorites that have experienced shock waves from such collisions can potentially be used to reveal the accretion process at different stages of evolution within the Solar System. Here we have determined the peak pressure experienced and the duration of impact in a chondrite and a martian meteorite, and have combined the data with impact scaling laws to infer the sizes of the impactors and the associated craters on the meteorite parent bodies. The duration of shock events is inferred from trace element distributions between coexisting high-pressure minerals in the shear melt veins of the meteorites. The shock duration and the associated sizes of the impactor are found to be much greater in the chondrite (approximately 1 s and 5 km, respectively) than in the martian meteorite (approximately 10 ms and 100 m). The latter result compares well with numerical modelling studies of cratering on Mars, and we suggest that martian meteorites with similar, recent ejection ages (10(5) to 10(7) years ago) may have originated from the same few square kilometres on Mars.

Ringwoodite lamellae in olivine: Clues to olivine-ringwoodite phase transition mechanisms in shocked meteorites and subducting slabs

The first natural occurrence of ringwoodite lamellae was found in the olivine grains inside and in areas adjacent to the shock veins of a chondritic meteorite, and these lamellae show distinct growth mechanism. Inside the veins where pressure and temperature were higher than elsewhere, ringwoodite lamellae formed parallel to the [101] planes of olivine, whereas outside they lie parallel to the (100) plane of olivine. The lamellae replaced the host olivine from a few percent to complete. Formation of these lamellae relates to a diffusion-controlled growth of ringwoodite along shear-induced planar defects in olivine. The planar defects and ringwoodite lamellae parallel to the [101] planes of olivine should have been produced in higher shear stress and temperature region than that parallel to the (100) plane of olivine. This study suggests that the time duration of high pressure and temperature for the growth of ringwoodite lamellae might have lasted at least for several seconds, and that an intracrystalline transformation mechanism of ringwoodite in olivine could favorably operate in the subducting lithospheric slabs in the deep Earth.

Natural occurrence and synthesis of two new postspinel polymorphs of chromite

A high-pressure polymorph of chromite, the first natural sample with the calcium ferrite structure, has been discovered in the shock veins of the Suizhou meteorite. Synchrotron x-ray diffraction analyses reveal an orthorhombic CaFe2O4-type (CF) structure. The unit-cell parameters are a = 8.954(7) A, b = 2.986(2) A, c = 9.891(7) A, V = 264.5(4) A3 (Z = 4) with space group Pnma. The new phase has a density of 5.62 g/cm3, which is 9.4% denser than chromite-spinel. We performed laser-heated diamond anvil cell experiments to establish that chromite-spinel transforms to CF at 12.5 GPa and then to the recently discovered CaTi2O4-type (CT) structure above 20 GPa. With the ubiquitous presence of chromite, the CF and CT phases may be among the important index minerals for natural transition sequence and pressure and temperature conditions in mantle rocks, shock-metamorphosed terrestrial rocks, and meteorites.

Natural NaAlSi(3)O(8)-hollandite in the shocked sixiangkou meteorite

The hollandite high-pressure polymorph of plagioclase has been identified in shock-induced melt veins of the Sixiangkou L6 chondrite. It is intimately intergrown with feldspathic glass within grains previously thought to be "maskelynite." The crystallographic nature of the mineral was established by laser micro-Raman spectroscopy and x-ray diffraction. The mineral is tetragonal with the unit cell parameters a = 9.263 +/- 0.003 angstroms and c = 2.706 +/- 0.003 angstroms. Its occurrence with the liquidus pair majorite-pyrope solid solution plus magnesiowustite sets constraints on the peak pressures that prevailed in the shock-induced melt veins. The absence of a calcium ferrite-structured phase sets an upper bound for the crystallization of the hollandite polymorph near 23 gigapascals.

Natural (Mg,Fe)SiO3-ilmenite and -perovskite in the Tenham meteorite

The minerals (Mg,Fe)SiO3-ilmenite and -perovskite were identified in the shock-induced veins in the Tenham chondritic meteorite. Both phases are inferred to have transformed from pyroxene at high pressures and temperatures by shock metamorphism. Columnar-shaped ilmenite grains, one of two types of morphologies, have a topotaxial relationship with neighboring pyroxene grains, indicating shear transformation. Granular-shaped perovskite grains showed a diffraction pattern consistent with orthorhombic perovskite, but these grains were not stable under the electron beam irradiation and became amorphous. The higher iron concentration in both phases compared with those experimentally reported may suggest their metastable transition from enstatite because of shock compression.

Petrological evidence for shock melting of carbonates in the martian meteorite ALH84001

The meteorite ALH84001--a shocked igneous rock of probable martian origin-contains chemically and isotopically heterogeneous carbonate globules, associated with which are organic and inorganic structures that have been interpreted as possible fossil remains of ancient martian biota. A critical assumption underlying this suggestion is that the carbonates formed from low-temperature fluids penetrating the cracks and voids of the host rock. Here we report petrological studies of ALH84001 which investigate the effects of shock on the various mineralogical components of the rock. We find that carbonate, plagioclase and silica were melted and partly redistributed by the same shock event responsible for the intense local crushing of pyroxene in the meteorite. Texture and compositional data show that, during the period of shock decompression, monomineralic melts were injected into pyroxene fractures that were subsequently cooled and resealed within seconds. Our results therefore suggest that the carbonates in ALH84001 could not have formed at low temperatures, but instead crystallized from shock-melted material; this conclusion weakens significantly the arguments that these carbonates could host the fossilized remnants of biogenic activity.