Protein-RNA interactions in an icosahedral virus at 3.0 A resolution

Genome-regulated Assembly of a ssRNA Virus May Also Prepare It for Infection

Many single-stranded, positive-sense RNA viruses regulate assembly of their infectious virions by forming multiple, cognate coat protein (CP)-genome contacts at sites termed Packaging Signals (PSs). We have determined the secondary structures of the bacteriophage MS2 ssRNA genome (gRNA) frozen in defined states using constraints from X-ray synchrotron footprinting (XRF). Comparison of the footprints from phage and transcript confirms the presence of multiple PSs in contact with CP dimers in the former. This is also true for a virus-like particle (VLP) assembled around the gRNA in vitro in the absence of the single-copy Maturation Protein (MP) found in phage. Since PS folds are present at many sites across gRNA transcripts, it appears that this genome has evolved to facilitate this mechanism of assembly regulation. There are striking differences between the gRNA-CP contacts seen in phage and the VLP, suggesting that the latter are inappropriate surrogates for aspects of phage structure/function. Roughly 50% of potential PS sites in the gRNA are not in contact with the protein shell of phage. However, many of these sit adjacent to, albeit not in contact with, PS-binding sites on CP dimers. We hypothesize that these act as PSs transiently during assembly but subsequently dissociate. Combining the XRF data with PS locations from an asymmetric cryo-EM reconstruction suggests that the genome positions of such dissociations are non-random and may facilitate infection. The loss of many PS-CP interactions towards the 3' end of the gRNA would allow this part of the genome to transit more easily through the narrow basal body of the pilus extruding machinery. This is the known first step in phage infection. In addition, each PS-CP dissociation event leaves the protein partner trapped in a non-lowest free-energy conformation. This destabilizes the protein shell which must disassemble during infection, further facilitating this stage of the life-cycle.

Picorna-Like Viruses of the Havel River, Germany

To improve the understanding of the virome diversity of riverine ecosystems in metropolitan areas, a metagenome analysis was performed with water collected in June 2018 from the river Havel in Berlin, Germany. After enrichment of virus particles and RNA extraction, paired-end Illumina sequencing was conducted and assignment to virus groups and families was performed. This paper focuses on picorna-like viruses, the most diverse and abundant group of viruses with impact on human, animal, and environmental health. Here, we describe altogether 166 viral sequences ranging in size from 1 to 11.5 kb. The 71 almost complete genomes are comprised of one candidate iflavirus, one picornavirus, two polycipiviruses, 27 marnaviruses, 27 dicistro-like viruses, and 13 untypeable viruses. Many partial picorna-like virus sequences up to 10.2 kb were also investigated. The sequences of the Havel picorna-like viruses represent genomes of seven of eight so far known Picornavirales families. Detection of numerous distantly related dicistroviruses suggests the existence of additional, yet unexplored virus groups with dicistronic genomes, including few viruses with unusual genome layout. Of special interest is a clade of dicistronic viruses with capsid protein-encoding sequences at the 5′-end of the genome. Also, monocistronic viruses with similarity of their polymerase and capsid proteins to those of dicistroviruses are interesting. A second protein with NTP-binding site present in the polyprotein of solinviviruses and related viruses needs further attention. The results underline the importance to study the viromes of fluvial ecosystems. So far acknowledged marnaviruses have been isolated from marine organisms. However, the present study and available sequence data suggest that rivers and limnic habitats are relevant ecosystems with circulation of marnaviruses as well as a plethora of unknown picorna-like viruses.

How and why RNA genomes are (partially) ordered in viral capsids

There is a long and productive progression of X-ray crystallographic and electron microscopy studies establishing the structures of the spherical/icosahedral and cylindrical/helical capsids of a wide range of virus particles. This is because of the high degree of order - down to the Angstrom scale - in the secondary/tertiary/quaternary structure of the proteins making up the capsids. In stark contradistinction, very little is known about the structure of DNA or RNA genomes inside these capsids. This is because of the relatively large extent of disorder in the confined DNA or RNA, due to several fundamental reasons: topological defects in the DNA case, and secondary/tertiary structural disorder in the RNA case. In this article we discuss the range of partial order associated with the encapsidated genomes of single-stranded RNA viruses, focusing on the contrast between mono-partite and multi-partite viruses and on the effects of sequence-specific and non-specific interactions between RNA and capsid proteins.

Icosahedral virus structures and the protein data bank

The structural study of icosahedral viruses has a long and impactful history in both crystallographic methodology and molecular biology. The evolution of the Protein Data Bank has paralleled and supported these studies providing readily accessible formats dealing with novel features associated with viral particle symmetries and subunit interactions. This overview describes the growth in size and complexity of icosahedral viruses from the first early studies of small RNA plant viruses and human picornaviruses up to the larger and more complex bacterial phage, insect, and human disease viruses such as Zika, hepatitis B, Adeno and Polyoma virus. The analysis of icosahedral viral capsid protein domain folds has shown striking similarities, with the beta jelly roll motif observed across multiple evolutionarily divergent species. The icosahedral symmetry of viruses drove the development of noncrystallographic symmetry averaging as a powerful phasing method, and the constraints of maintaining this symmetry resulted in the concept of quasi-equivalence in viral structures. Symmetry also played an important early role in demonstrating the power of cryo-electron microscopy as an alternative to crystallography in generating atomic resolution structures of these viruses. The Protein Data Bank has been a critical resource for assembling and disseminating these structures to a wide community, and the virus particle explorer (VIPER) was developed to enable users to easily generate and view complete viral capsid structures from their asymmetric building blocks. Finally, we share a personal perspective on the early use of computer graphics to communicate the intricacies, interactions, and beauty of these virus structures.

An RNA-centric historical narrative around the Protein Data Bank

Some of the amazing contributions brought to the scientific community by the Protein Data Bank (PDB) are described. The focus is on nucleic acid structures with a bias toward RNA. The evolution and key roles in science of the PDB and other structural databases for nucleic acids illustrate how small initial ideas can become huge and indispensable resources with the unflinching willingness of scientists to cooperate globally. The progress in the understanding of the molecular interactions driving RNA architectures followed the rapid increase in RNA structures in the PDB. That increase was consecutive to improvements in chemical synthesis and purification of RNA molecules, as well as in biophysical methods for structure determination and computer technology. The RNA modeling efforts from the early beginnings are also described together with their links to the state of structural knowledge and technological development. Structures of RNA and of its assemblies are physical objects, which, together with genomic data, allow us to integrate present-day biological functions and the historical evolution in all living species on earth.

Buckling transitions and soft-phase invasion of two-component icosahedral shells

What is the optimal distribution of two types of crystalline phases on the surface of icosahedral shells, such as of many viral capsids? We here investigate the distribution of a thin layer of soft material on a crystalline convex icosahedral shell. We demonstrate how the shapes of spherical viruses can be understood from the perspective of elasticity theory of thin two-component shells. We develop a theory of shape transformations of an icosahedral shell upon addition of a softer, but still crystalline, material onto its surface. We show how the soft component "invades" the regions with the highest elastic energy and stress imposed by the 12 topological defects on the surface. We explore the phase diagram as a function of the surface fraction of the soft material, the shell size, and the incommensurability of the elastic moduli of the rigid and soft phases. We find that, as expected, progressive filling of the rigid shell by the soft phase starts from the most deformed regions of the icosahedron. With a progressively increasing soft-phase coverage, the spherical segments of domes are filled first (12 vertices of the shell), then the cylindrical segments connecting the domes (30 edges) are invaded, and, ultimately, the 20 flat faces of the icosahedral shell tend to be occupied by the soft material. We present a detailed theoretical investigation of the first two stages of this invasion process and develop a model of morphological changes of the cone structure that permits noncircular cross sections. In conclusion, we discuss the biological relevance of some structures predicted from our calculations, in particular for the shape of viral capsids.

Apple latent spherical virus structure with stable capsid frame supports quasi-stable protrusions expediting genome release

Picorna-like plant viruses are non-enveloped RNA spherical viruses of ~30 nm. Part of the survival of these viruses depends on their capsid being stable enough to harbour the viral genome and yet malleable enough to allow its release. However, molecular mechanisms remain obscure. Here, we report a structure of a picorna-like plant virus, apple latent spherical virus, at 2.87 Å resolution by single-particle cryo-electron microscopy (cryo-EM) with a cold-field emission beam. The cryo-EM map reveals a unique structure composed of three capsid proteins Vp25, Vp20, and Vp24. Strikingly Vp25 has a long N-terminal extension, which substantially stabilises the capsid frame of Vp25 and Vp20 subunits. Cryo-EM images also resolve RNA genome leaking from a pentameric protrusion of Vp24 subunits. The structures and observations suggest that genome release occurs through occasional opening of the Vp24 subunits, possibly suppressed to a low frequency by the rigid frame of the other subunits.

The 3Ds in virus-like particle based-vaccines: "Design, Delivery and Dynamics"

Vaccines need to be rationally designed in order be delivered to the immune system for maximizing induction of dynamic immune responses. Virus‐like particles (VLPs) are ideal platforms for such 3D vaccines, as they allow the display of complex and native antigens in a highly repetitive form on their surface and can easily reach lymphoid organs in intact form for optimal activation of B and T cells. Adjusting size and zeta potential may allow investigators to further fine‐tune delivery to lymphoid organs. An additional way to alter vaccine transfer to lymph nodes and spleen may be the formulation with micron‐sized adjuvants that creates a local depot and results in a slow release of antigen and adjuvant. Ideally, the adjuvant in addition stimulates the innate immune system. The dynamics of the immune response may be further enhanced by inclusion of Toll‐like receptor ligands, which many VLPs naturally package. Hence, considering the 3Ds in vaccine development may allow for enhancement of their attributes to tackle complex diseases, not usually amenable to conventional vaccine strategies.

Asymmetry in icosahedral viruses

Although icosahedral viruses have obvious and highly symmetrical features, asymmetric structural elements are also present. Asymmetric features may be inherent since the genome and location of minor capsid proteins are typically incorporated without adhering to icosahedral symmetry. Asymmetry also develops during the virus life cycle in order to accomplish key functions such as genome packaging, release, and organization. However, resolving asymmetric features complicates image processing during single-particle cryoEM analysis. This review summarizes the current state of knowledge regarding asymmetric structural features with specific examples drawn from members of picornaviridae, parvoviradae, microviradae, and leviviridae.

The cryo-electron microscopy structure of Broad Bean Stain Virus suggests a common capsid assembly mechanism among comoviruses

The Broad bean stain virus (BBSV) is a member of the genus Comovirus infecting Fabaceae. The virus is transmitted through seed and by plant weevils causing severe and widespread disease worldwide. BBSV has a bipartite, positive-sense, single-stranded RNA genome encapsidated in icosahedral particles. We present here the cryo-electron microscopy reconstruction of the BBSV and an atomic model of the capsid proteins refined at 3.22 Å resolution. We identified residues involved in RNA/capsid interactions revealing a unique RNA genome organization. Inspection of the small coat protein C-terminal domain highlights a maturation cleavage between Leu567 and Leu568 and interactions of the C-terminal stretch with neighbouring small coat proteins within the capsid pentameric turrets. These interactions previously proposed to play a key role in the assembly of the Cowpea mosaic virus suggest a common capsid assembly mechanism throughout all comovirus species.

So What Have Plant Viruses Ever Done for Virology and Molecular Biology?

The discovery of a new class of pathogen, viruses, in the late 19th century, ushered in a period of study of the biochemical and structural properties of these entities in which plant viruses played a prominent role. This was, in large part, due to the relative ease with which sufficient quantities of material could be produced for such analyses. As analytical techniques became increasingly sensitive, similar studies could be performed on the viruses from other organisms. However, plant viruses continued to play an important role in the development of molecular biology, including the demonstration that RNA can be infectious, the determination of the genetic code, the mechanism by which viral RNAs are translated, and some of the early studies on gene silencing. Thus, the study of plant viruses should not be considered a "niche" subject but rather part of the mainstream of virology and molecular biology.

The structures of a naturally empty cowpea mosaic virus particle and its genome-containing counterpart by cryo-electron microscopy

Cowpea mosaic virus (CPMV) is a picorna-like plant virus. As well as an intrinsic interest in CPMV as a plant pathogen, CPMV is of major interest in biotechnology applications such as nanotechnology. Here, we report high resolution cryo electron microscopy (cryo-EM) maps of wild type CPMV containing RNA-2, and of naturally-formed empty CPMV capsids. The resolution of these structures is sufficient to visualise large amino acids. We have refined an atomic model for each map and identified an essential amino acid involved in genome encapsidation. This work has furthered our knowledge of Picornavirales genome encapsidation and will assist further work in the development of CPMV as a biotechnological tool.

Cryo-electron Microscopy Structures of Expanded Poliovirus with VHHs Sample the Conformational Repertoire of the Expanded State

By using cryo-electron microscopy, expanded 80S-like poliovirus virions (poliovirions) were visualized in complexes with four 80S-specific camelid VHHs (Nanobodies). In all four complexes, the VHHs bind to a site on the top surface of the capsid protein VP3, which is hidden in the native virus. Interestingly, although the four VHHs bind to the same site, the structures of the expanded virus differ in detail in each complex, suggesting that each of the Nanobodies has sampled a range of low-energy structures available to the expanded virion. By stabilizing unique structures of expanded virions, VHH binding permitted a more detailed view of the virus structure than was previously possible, leading to a better understanding of the expansion process that is a critical step in infection. It is now clear which polypeptide chains become disordered and which become rearranged. The higher resolution of these structures also revealed well-ordered conformations for the EF loop of VP2, the GH loop of VP3, and the N-terminal extensions of VP1 and VP2, which, in retrospect, were present in lower-resolution structures but not recognized. These structural observations help to explain preexisting mutational data and provide insights into several other stages of the poliovirus life cycle, including the mechanism of receptor-triggered virus expansion.

IMPORTANCE

When poliovirus infects a cell, it undergoes a change in its structure in order to pass RNA through its protein coat, but this altered state is short-lived and thus poorly understood. The structures of poliovirus bound to single-domain antibodies presented here capture the altered virus in what appear to be intermediate states. A careful analysis of these structures lets us better understand the molecular mechanism of infection and how these changes in the virus lead to productive-infection events.

Protein-RNA interactions: structural biology and computational modeling techniques

RNA-binding proteins are functionally diverse within cells, being involved in RNA-metabolism, translation, DNA damage repair, and gene regulation at both the transcriptional and post-transcriptional levels. Much has been learnt about their interactions with RNAs through structure determination techniques and computational modeling. This review gives an overview of the structural data currently available for protein-RNA complexes, and discusses the technical issues facing structural biologists working to solve their structures. The review focuses on three techniques used to solve the 3-dimensional structure of protein-RNA complexes at atomic resolution, namely X-ray crystallography, solution nuclear magnetic resonance (NMR) and cryo-electron microscopy (cryo-EM). The review then focuses on the main computational modeling techniques that use these atomic resolution data: discussing the prediction of RNA-binding sites on unbound proteins, docking proteins, and RNAs, and modeling the molecular dynamics of the systems. In conclusion, the review looks at the future directions this field of research might take.

Mechanisms of assembly and genome packaging in an RNA virus revealed by high-resolution cryo-EM

Cowpea mosaic virus is a plant-infecting member of the Picornavirales and is of major interest in the development of biotechnology applications. Despite the availability of >100 crystal structures of Picornavirales capsids, relatively little is known about the mechanisms of capsid assembly and genome encapsidation. Here we have determined cryo-electron microscopy reconstructions for the wild-type virus and an empty virus-like particle, to 3.4 Å and 3.0 Å resolution, respectively, and built de novo atomic models of their capsids. These new structures reveal the C-terminal region of the small coat protein subunit, which is essential for virus assembly and which was missing from previously determined crystal structures, as well as residues that bind to the viral genome. These observations allow us to develop a new model for genome encapsidation and capsid assembly.

Little is known about how the plant-infecting cowpea mosaic virus (CPMV)—an invaluable tool in several biotechnology applications—packages its single-strand RNA genome into the capsid. Here the authors present two high-resolution cryo-EM structures of CPMV and a new model for RNA recognition and capsid assembly.

The Structure of Human Parechovirus 1 Reveals an Association of the RNA Genome with the Capsid

Parechoviruses are human pathogens that cause diseases ranging from gastrointestinal disorders to encephalitis. Unlike those of most picornaviruses, parechovirus capsids are composed of only three subunits: VP0, VP1, and VP3. Here, we present the structure of a human parechovirus 1 (HPeV-1) virion determined to a resolution of 3.1 Å. We found that interactions among pentamers in the HPeV-1 capsid are mediated by the N termini of VP0s, which correspond to the capsid protein VP4 and the N-terminal part of the capsid protein VP2 of other picornaviruses. In order to facilitate delivery of the virus genome into the cytoplasm, the N termini of VP0s have to be released from contacts between pentamers and exposed at the particle surface, resulting in capsid disruption. A hydrophobic pocket, which can be targeted by capsid-binding antiviral compounds in many other picornaviruses, is not present in HPeV-1. However, we found that interactions between the HPeV-1 single-stranded RNA genome and subunits VP1 and VP3 in the virion impose a partial icosahedral ordering on the genome. The residues involved in RNA binding are conserved among all parechoviruses, suggesting a putative role of the genome in virion stability or assembly. Therefore, putative small molecules that could disrupt HPeV RNA-capsid protein interactions could be developed into antiviral inhibitors.

IMPORTANCE

Human parechoviruses (HPeVs) are pathogens that cause diseases ranging from respiratory and gastrointestinal disorders to encephalitis. Recently, there have been outbreaks of HPeV infections in Western Europe and North America. We present the first atomic structure of parechovirus HPeV-1 determined by X-ray crystallography. The structure explains why HPeVs cannot be targeted by antiviral compounds that are effective against other picornaviruses. Furthermore, we found that the interactions of the HPeV-1 genome with the capsid resulted in a partial icosahedral ordering of the genome. The residues involved in RNA binding are conserved among all parechoviruses, suggesting an evolutionarily fixed role of the genome in virion assembly. Therefore, putative small molecules disrupting HPeV RNA-capsid protein interactions could be developed into antiviral inhibitors.

Asymmetric genome organization in an RNA virus revealed via graph-theoretical analysis of tomographic data

Cryo-electron microscopy permits 3-D structures of viral pathogens to be determined in remarkable detail. In particular, the protein containers encapsulating viral genomes have been determined to high resolution using symmetry averaging techniques that exploit the icosahedral architecture seen in many viruses. By contrast, structure determination of asymmetric components remains a challenge, and novel analysis methods are required to reveal such features and characterize their functional roles during infection. Motivated by the important, cooperative roles of viral genomes in the assembly of single-stranded RNA viruses, we have developed a new analysis method that reveals the asymmetric structural organization of viral genomes in proximity to the capsid in such viruses. The method uses geometric constraints on genome organization, formulated based on knowledge of icosahedrally-averaged reconstructions and the roles of the RNA-capsid protein contacts, to analyse cryo-electron tomographic data. We apply this method to the low-resolution tomographic data of a model virus and infer the unique asymmetric organization of its genome in contact with the protein shell of the capsid. This opens unprecedented opportunities to analyse viral genomes, revealing conserved structural features and mechanisms that can be targeted in antiviral drug design.

Structure of viruses: a short history

This review is a partially personal account of the discovery of virus structure and its implication for virus function. Although I have endeavored to cover all aspects of structural virology and to acknowledge relevant individuals, I know that I have favored taking examples from my own experience in telling this story. I am anxious to apologize to all those who I might have unintentionally offended by omitting their work. The first knowledge of virus structure was a result of Stanley's studies of tobacco mosaic virus (TMV) and the subsequent X-ray fiber diffraction analysis by Bernal and Fankuchen in the 1930s. At about the same time it became apparent that crystals of small RNA plant and animal viruses could diffract X-rays, demonstrating that viruses must have distinct and unique structures. More advances were made in the 1950s with the realization by Watson and Crick that viruses might have icosahedral symmetry. With the improvement of experimental and computational techniques in the 1970s, it became possible to determine the three-dimensional, near-atomic resolution structures of some small icosahedral plant and animal RNA viruses. It was a great surprise that the protecting capsids of the first virus structures to be determined had the same architecture. The capsid proteins of these viruses all had a 'jelly-roll' fold and, furthermore, the organization of the capsid protein in the virus were similar, suggesting a common ancestral virus from which many of today's viruses have evolved. By this time a more detailed structure of TMV had also been established, but both the architecture and capsid protein fold were quite different to that of the icosahedral viruses. The small icosahedral RNA virus structures were also informative of how and where cellular receptors, anti-viral compounds, and neutralizing antibodies bound to these viruses. However, larger lipid membrane enveloped viruses did not form sufficiently ordered crystals to obtain good X-ray diffraction. Starting in the 1990s, these enveloped viruses were studied by combining cryo-electron microscopy of the whole virus with X-ray crystallography of their protein components. These structures gave information on virus assembly, virus neutralization by antibodies, and virus fusion with and entry into the host cell. The same techniques were also employed in the study of complex bacteriophages that were too large to crystallize. Nevertheless, there still remained many pleomorphic, highly pathogenic viruses that lacked the icosahedral symmetry and homogeneity that had made the earlier structural investigations possible. Currently some of these viruses are starting to be studied by combining X-ray crystallography with cryo-electron tomography.

To build a virus on a nucleic acid substrate

Many viruses package their genomes concomitant with assembly. Here, we show that this reaction can be described by three coefficients: association of capsid protein (CP) to nucleic acid (NA), KNA; CP-CP interaction, ω; and α, proportional to the work required to package NA. The value of α can vary as NA is packaged. A phase diagram of average lnα versus lnω identifies conditions where assembly is likely to fail or succeed. NA morphology can favor (lnα > 0) or impede (lnα < 0) assembly. As lnω becomes larger, capsids become more stable and assembly becomes more cooperative. Where (lnα + lnω) < 0, the CP is unable to contain the NA, so that assembly results in aberrant particles. This phase diagram is consistent with quantitative studies of cowpea chlorotic mottle virus, hepatitis B virus, and simian virus 40 assembling on ssRNA and dsDNA substrates. Thus, the formalism we develop is suitable for describing and predicting behavior of experimental studies of CP assembly on NA.

Non-encapsidation activities of the capsid proteins of positive-strand RNA viruses

Viral capsid proteins (CPs) are characterized by their role in forming protective shells around viral genomes. However, CPs have additional and important roles in the virus infection cycles and in the cellular responses to infection. These activities involve CP binding to RNAs in both sequence-specific and nonspecific manners as well as association with other proteins. This review focuses on CPs of both plant and animal-infecting viruses with positive-strand RNA genomes. We summarize the structural features of CPs and describe their modulatory roles in viral translation, RNA-dependent RNA synthesis, and host defense responses.

•

We review regulatory activities of the capsid proteins of (+)-strand RNA viruses.

•

Activities of capsid proteins due to RNA binding and protein binding.

•

Effects of capsid proteins on viral processes.

•

Effects of capsid proteins on cellular processes.

•

Regulatory activities of the capsid proteins are affected by capsid concentrations.

Confessions of an icosahedral virus crystallographer

This is a personal history of my structural studies of icosahedral viruses that evolved from crystallographic studies, to hybrid methods with electron cryo-microscopy and image reconstruction (cryoEM) and then developed further by incorporating a variety of physical methods to augment the high resolution crystallographic studies. It is not meant to be comprehensive, even for my own work, but hopefully provides some perspective on the growth of our understanding of these remarkable biologic assemblies. The goal is to provide a historical perspective for those new to the field and to emphasize the limitations of any one method, even those that provide atomic resolution information about viruses.

The crystallographic structure of Panicum Mosaic Virus (PMV)

The structure of Panicum Mosaic Virus (PMV) was determined by X-ray diffraction analysis to 2.9Å resolution. The crystals were of pseudo symmetry F23; the true crystallographic unit cell was of space group P2(1) with a=411.7Å, b=403.9Å and c=412.5Å, with β=89.7°. The asymmetric unit was two entire T=3 virus particles, or 360 protein subunits. The structure was solved by conventional molecular replacement from two distant homologues, Cocksfoot Mottle Virus (CfMV) and Tobacco Necrosis Virus (TNV), of ∼20% sequence identity followed by phase extension. The model was initially refined with exact icosahedral constraints and then with icosahedral restraints. The virus has Ca(++) ions octahedrally coordinated by six aspartic acid residues on quasi threefold axes, which is completely different than for either CfMV or TNV. Amino terminal residues 1-53, 1-49 and 1-21 of the A, B and C subunits, respectively, and the four C-terminal residues (239-242) are not visible in electron density maps. The additional ordered residues of the C chain form a prominent "arm" that intertwines with symmetry equivalent "arms" at icosahedral threefold axes, as was seen in both CfMV and TNV. A 17 nucleotide hairpin segment of genomic RNA is icosahedrally ordered and bound at 60 equivalent sites at quasi twofold A-B subunit interfaces at the interior surface of the capsid. This segment of RNA may serve as a conformational switch for coat protein subunits, as has been proposed for similar RNA segments in other viruses.

Langevin dynamics simulation of polymer-assisted virus-like assembly

Starting from a coarse grained representation of the building units of the minute virus of mice and a flexible polyelectrolyte molecule, we have explored the mechanism of assembly into icosahedral structures with the help of Langevin dynamics simulations and the parallel tempering technique. Regular icosahedra with appropriate symmetry form only in a narrow range of temperature and polymer length. Within this region of parameters where successful assembly would proceed, we have systematically investigated the growth kinetics. The assembly of icosahedra is found to follow the classical nucleation and growth mechanism in the absence of the polymer, with the three regimes of nucleation, linear growth, and slowing down in the later stage. The calculated average nucleation time obeys the laws expected from the classical nucleation theory. The linear growth rate is found to obey the laws of secondary nucleation as in the case of lamellar growth in polymer crystallization. The same mechanism is seen in the simulations of the assembly of icosahedra in the presence of the polymer as well. The polymer reduces the nucleation barrier significantly by enhancing the local concentration of subunits via adsorbing them on their backbone. The details of growth in the presence of the polymer are also found to be consistent with the classical nucleation theory, despite the smallness of the assembled structures.

Screening for the Location of RNA using the Chloride Ion Distribution in Simulations of Virus Capsids

The complete structure of the genomic material inside a virus capsid remains elusive, although a limited amount of symmetric nucleic acid can be resolved in the crystal structure of 17 icosahedral viruses. The negatively charged sugar-phosphate backbone of RNA and DNA as well as the large positive charge of the interior surface of the virus capsids suggest that electrostatic complementarity is an important factor in the packaging of the genomes in these viruses. To test how much packing information is encoded by the electrostatic and steric envelope of the capsid interior, we performed extensive all-atom molecular dynamics (MD) simulations of virus capsids with explicit water molecules and solvent ions. The model systems were two small plant viruses in which significant amounts of RNA has been observed by X-ray crystallography: satellite tobacco mosaic virus (STMV, 62% RNA visible) and satellite tobacco necrosis virus (STNV, 34% RNA visible). Simulations of half-capsids of these viruses with no RNA present revealed that the binding sites of RNA correlated well with regions populated by chloride ions, suggesting that it is possible to screen for the binding sites of nucleic acids by determining the equilibrium distribution of negative ions. By including the crystallographically resolved RNA in addition to ions, we predicted the localization of the unresolved RNA in the viruses. Both viruses showed a hot-spot for RNA binding at the 5-fold symmetry axis. The MD simulations were compared to predictions of the chloride density based on nonlinear Poisson-Boltzmann equation (PBE) calculations with mobile ions. Although the predictions are superficially similar, the PBE calculations overestimate the ion concentration close to the capsid surface and underestimate it far away, mainly because protein dynamics is not taken into account. Density maps from chloride screening can be used to aid in building atomic models of packaged virus genomes. Knowledge of the principles of genome packaging might be exploited for both antiviral therapy and technological applications.

Label-free virus detection using silicon photonic microring resonators

Viruses represent a continual threat to humans through a number of mechanisms, which include disease, bioterrorism, and destruction of both plant and animal food resources. Many contemporary techniques used for the detection of viruses and viral infections suffer from limitations such as the need for extensive sample preparation or the lengthy window between infection and measurable immune response, for serological methods. In order to develop a method that is fast, cost-effective, and features reduced sample preparation compared to many other virus detection methods, we report the application of silicon photonic microring resonators for the direct, label-free detection of intact viruses in both purified samples as well as in a complex, real-world analytical matrix. As a model system, we demonstrate the quantitative detection of Bean pod mottle virus, a pathogen of great agricultural importance, with a limit of detection of 10 ng/mL. By simply grinding a small amount of leaf sample in buffer with a mortar and pestle, infected leaves can be identified over a healthy control with a total analysis time of less than 45 min. Given the inherent scalability and multiplexing capability of the semiconductor-based technology, we feel that silicon photonic microring resonators are well-positioned as a promising analytical tool for a number of viral detection applications.

Principles of virus structural organization

Viruses, the molecular nanomachines infecting hosts ranging from prokaryotes to eukaryotes, come in different sizes, shapes, and symmetries. Questions such as what principles govern their structural organization, what factors guide their assembly, how these viruses integrate multifarious functions into one unique structure have enamored researchers for years. In the last five decades, following Caspar and Klug's elegant conceptualization of how viruses are constructed, high-resolution structural studies using X-ray crystallography and more recently cryo-EM techniques have provided a wealth of information on structures of a variety of viruses. These studies have significantly -furthered our understanding of the principles that underlie structural organization in viruses. Such an understanding has practical impact in providing a rational basis for the design and development of antiviral strategies. In this chapter, we review principles underlying capsid formation in a variety of viruses, emphasizing the recent developments along with some historical perspective.

Construction and crystal structure of recombinant STNV capsids

A codon-optimised gene has been expressed in Escherichia coli to produce the coat protein (CP) of the Satellite Tobacco Necrosis Virus. This protein assembles in vivo into capsids closely resembling those of the T=1 wild-type virus. These virus-like particles (VLPs) package the recombinant mRNA transcript and can be disassembled and reassembled using different buffer conditions. The X-ray crystal structure of the VLP has been solved and refined at 1.4 Å resolution and shown to be very similar to that of wild-type Satellite Tobacco Necrosis Virus, except that icosahedral symmetry constraints could be removed to reveal differences between subunits, presumably owing to crystal packing. An additional low-resolution X-ray crystal structure determination revealed well-ordered RNA fragments lodged near the inside surface of the capsid, close to basic clusters formed by the N-terminal helices that project into the interior of the particle. The RNA consists of multiple copies of a 3-bp helical stem, with a single unpaired base at the 3' end, and probably consists of a number of short stem-loops where the loop region is disordered. The arrangement of the RNA is different from that observed in other satellite viruses.

Structural insights into viral determinants of nematode mediated Grapevine fanleaf virus transmission

Many animal and plant viruses rely on vectors for their transmission from host to host. Grapevine fanleaf virus (GFLV), a picorna-like virus from plants, is transmitted specifically by the ectoparasitic nematode Xiphinema index. The icosahedral capsid of GFLV, which consists of 60 identical coat protein subunits (CP), carries the determinants of this specificity. Here, we provide novel insight into GFLV transmission by nematodes through a comparative structural and functional analysis of two GFLV variants. We isolated a mutant GFLV strain (GFLV-TD) poorly transmissible by nematodes, and showed that the transmission defect is due to a glycine to aspartate mutation at position 297 (Gly297Asp) in the CP. We next determined the crystal structures of the wild-type GFLV strain F13 at 3.0 Å and of GFLV-TD at 2.7 Å resolution. The Gly297Asp mutation mapped to an exposed loop at the outer surface of the capsid and did not affect the conformation of the assembled capsid, nor of individual CP molecules. The loop is part of a positively charged pocket that includes a previously identified determinant of transmission. We propose that this pocket is a ligand-binding site with essential function in GFLV transmission by X. index. Our data suggest that perturbation of the electrostatic landscape of this pocket affects the interaction of the virion with specific receptors of the nematode's feeding apparatus, and thereby severely diminishes its transmission efficiency. These data provide a first structural insight into the interactions between a plant virus and a nematode vector.

Numerous pathogenic viruses from animals and plants rely on vectors such as insects, worms or other organisms for their transmission from host to host. The reasons why certain vectors transmit some viruses but not others remain poorly understood. In plants, Grapevine fanleaf virus (GFLV), a major pathogen of grapes worldwide and its specific vector, the dagger nematode Xiphinema index, provides a well-established model illustrating this specificity. Here, we determined the high-resolution structures of two GFLV isolates that differ in their transmissibility. We show that this difference is due to a single mutation in a region exposed at the outer surface of the viral particles. This mutation does not alter the conformation of the particles but modifies the distribution of charges within a positively-charged pocket at the outer surface of virions which likely affects particle retention by X. index and, thereby also transmission efficiency. Therefore, we propose that this pocket is involved in the specific recognition of GFLV by its nematode vector. This work paves the way towards the characterization of the specific compound(s) within the nematodes that trigger vector specificity and provides novel perspectives to interfere with virus transmission.

Virus hybrids as nanomaterials for biotechnology

The current review describes advances in the field of bionanotechnology in which viruses are used to fabricate nanomaterials. Viruses are introduced as protein cages, scaffolds, and templates for the production of biohybrid nanostructured materials where organic and inorganic molecules are incorporated in a precise and a controlled fashion. Genetic engineering enables the insertion or replacement of selected amino acids on virus capsids for uses from bioconjugation to crystal growth. The variety of nanomaterials generated in rod-like and spherical viruses is highlighted for tobacco mosaic virus (TMV), M13 bacteriophage, cowpea chlorotic mottle virus (CCMV), and cowpea mosaic virus (CPMV). Functional biohybrid nanomaterials find applications in biosensing, memory devices, nanocircuits, light-harvesting systems, and nanobatteries.

Genome packaging in viruses

Genome packaging is a fundamental process in a viral life cycle. Many viruses assemble preformed capsids into which the genomic material is subsequently packaged. These viruses use a packaging motor protein that is driven by the hydrolysis of ATP to condense the nucleic acids into a confined space. How these motor proteins package viral genomes had been poorly understood until recently, when a few X-ray crystal structures and cryo-electron microscopy (cryo-EM) structures became available. Here we discuss various aspects of genome packaging and compare the mechanisms proposed for packaging motors on the basis of structural information.

Picornaviruses

The picornavirus family consists of a large number of small RNA viruses, many of which are significant pathogens of humans and livestock. They are amongst the simplest of vertebrate viruses comprising a single stranded positive sense RNA genome within a T = 1 (quasi T = 3) icosahedral protein capsid of approximately 30 nm diameter. The structures of a number of picornaviruses have been determined at close to atomic resolution by X-ray crystallography. The structures of cell entry intermediate particles and complexes of virus particles with receptor molecules or antibodies have also been obtained by X-ray crystallography or at a lower resolution by cryo-electron microscopy. Many of the receptors used by different picornaviruses have been identified, and it is becoming increasingly apparent that many use co-receptors and alternative receptors to bind to and infect cells. However, the mechanisms by which these viruses release their genomes and transport them across a cellular membrane to gain access to the cytoplasm are still poorly understood. Indeed, detailed studies of cell entry mechanisms have been made only on a few members of the family, and it is yet to be established how broadly the results of these are applicable across the full spectrum of picornaviruses. Working models of the cell entry process are being developed for the best studied picornaviruses, the enteroviruses. These viruses maintain particle integrity throughout the infection process and function as genome delivery modules. However, there is currently no model to explain how viruses such as cardio- and aphthoviruses that appear to simply dissociate into subunits during uncoating deliver their genomes into the cytoplasm.

Manipulation of the mechanical properties of a virus by protein engineering

In a previous study, we showed that the DNA molecule within a spherical virus (the minute virus of mice) plays an architectural role by anisotropically increasing the mechanical stiffness of the virus. A finite element model predicted that this mechanical reinforcement is a consequence of the interaction between crystallographically visible, short DNA patches and the inner capsid wall. We have now tested this model by using protein engineering. Selected amino acid side chains have been truncated to specifically remove major interactions between the capsid and the visible DNA patches, and the effect of the mutations on the stiffness of virus particles has been measured using atomic force microscopy. The mutations do not affect the stiffness of the empty capsid; however, they significantly reduce the difference in stiffness between the DNA-filled virion and the empty capsid. The results (i) reveal that intermolecular interactions between individual chemical groups contribute to the mechanical properties of a supramolecular assembly and (ii) identify specific protein-DNA interactions as the origin of the anisotropic increase in the rigidity of a virus. This study also demonstrates that it is possible to control the mechanical properties of a protein nanoparticle by the rational application of protein engineering based on a mechanical model.

The three-dimensional structure of ryegrass mottle virus at 2.9 A resolution

The crystal structure of the sobemovirus Ryegrass mottle virus (RGMoV) has been determined at 2.9 A resolution. The coat protein has a canonical jellyroll beta-sandwich fold. In comparison to other sobemoviruses the RGMoV coat protein is missing several residues in two of the loop regions. The first loop contributes to contacts between subunits around the quasi-threefold symmetry axis. The altered contact interface results in tilting of the subunits towards the quasi-threefold axis. The assembly of the T=3 capsid of sobemoviruses is controlled by the N-termini of C subunits forming a so-called beta-annulus. The other loop that is smaller in the RGMoV structure contains a helix that participates in stabilization of the beta-annulus in other sobemoviruses. The loss of interaction between the RGMoV loop and the beta-annulus has been compensated for by additional interactions between the N-terminal arms. As a consequence of these differences, the diameter of the RGMoV particle is 8 A smaller than that of the other sobemoviruses. The interactions of coat proteins in sobemovirus capsids involve calcium ions. Depletion of calcium ions results in particle swelling, which is considered a first step in disassembly. We could not identify any density for metal ions in the proximity of the conserved residues normally involved in calcium binding, but the RGMoV structure does not show any signs of swelling. A likely reason is the low pH (3.0) of the crystallization buffer in which the groups interacting with the calcium ions are not charged.

Cheravirus and Sadwavirus: two unassigned genera of plant positive-sense single-stranded RNA viruses formerly considered atypical members of the genus Nepovirus (family Comoviridae)

The genus Nepovirus (family Comoviridae) was known both for a good level of homogeneity and for the presence of atypical members. In particular, the atypical members of the genus differed by the number of capsid protein (CP) subunits. While typical nepoviruses have a single CP subunit with three structural domains, atypical nepoviruses have either three small CP subunits, probably corresponding to the three individual domains, or a large and a small subunit, probably containing two and one structural domains, respectively. These differences are corroborated by hierarchical clustering based on sequences derived from both genomic RNAs. Therefore, these atypical viruses are now classified in two distinct genera, Cheravirus (three CP subunits; type species Cherry rasp leaf virus) and Sadwavirus (two CP subunits; type species Satsuma dwarf virus).

Novel Naturally Occurring Bean pod mottle virus Reassortants with Mixed Heterologous RNA1 Genomes

ABSTRACT The comovirus Bean pod mottle virus (BPMV) is widespread in the soybean-growing regions in the United States. It has a bipartite genome consisting of RNA1 and RNA2, which are encapsidated separately. We previously have reported the occurrence in nature of two distinct subgroups of BPMV strains (subgroups I and II), as well as reassortants between the two subgroups. Here, we report the isolation and molecular characterization of naturally occurring partial diploid reassortant strains, which are diploid for RNA1 and haploid for RNA2. Whereas the RNA1s of the partial diploids are derived from two distinct strain subgroups (I and II), the RNA2 is derived from either subgroup I or II. The partial diploid strains induced strikingly severe symptoms on soybean, which could be explained based on the presence of two distinct RNA1s in the same plant. This conclusion was supported by the finding that pseudo-recombinants constructed with two diverse RNA1s induced very severe symptoms on soybean that mimicked those produced by the naturally occurring partial diploids. No enhancement of symptom severity was observed with pseudorecombinants constructed with closely related RNA1s. Likewise, no enhancement of symptom severity was noted with pseudo-recombinants that are diploid for RNA2 and haploid for RNA1. The potential role of genetic reassortment in the epidemiology and pathogenesis of BPMV is discussed.

The Structural and Functional Role of RNA in Icosahedral Virus Assembly

Despite tremendous advances in high-resolution structure determination of virus particles, the organization of encapsidated genomes and their role during assembly are poorly understood. This article summarizes recent insights from structural, biochemical, and genetic analyses of icosahedral viruses that contain single-stranded, positive-sense RNA genomes. X-ray crystallography of several viruses in this category has provided tantalizing glimpses of portions of the packaged nucleic acid, contributing crucial information on how the genome might be folded within the virion. This information combined with theoretical considerations and data from molecular approaches suggests mechanisms by which coat proteins interact with genomic RNA to shape it into a conformation that is compatible with the geometry of the virion. It appears that RNA, in addition to its function as a repository for genetic information, plays an important structural role during assembly and can on occasion override the ability of the coat protein to form a particle with defined icosahedral symmetry.

Structures of T=1 and T=3 particles of cucumber necrosis virus: evidence of internal scaffolding

Cucumber necrosis virus (CNV) is a member of the genus Tombusvirus, of which tomato bushy stunt virus (TBSV) is the type member. The capsid protein for this group of viruses is composed of three major domains: the R domain, which interacts with the RNA genome: the S domain, which forms the tight capsid shell: and the protruding P domain, which extends approximately 40 Angstrom from the surface. Here, we present the cryo-transmission electron microscopy structures of both the T=1 and T=3 capsids to a resolution of approximately 12 Angstrom. The T=3 capsid is essentially identical with that of TBSV, and the T=1 particles are well described by the A subunit pentons from TBSV. Perhaps most notable is the fact that the T=3 particles have an articulated internal structure with two major internal shells, while the internal core of the T=1 particle is essentially disordered. These internal shells of the T=3 capsid agree extremely well in both dimension and character with published neutron-scattering results. This structure, combined with mutagenesis results in the accompanying article, suggests that the R domain forms an internal icosahedral scaffold that may play a role in T=3 capsid assembly. In addition, the N-terminal region has been shown to be involved in chloroplast targeting. Therefore, this region apparently has remarkably diverse functions that may be distributed unevenly among the quasi-equivalent A, B, and C subunits.

A 3D model of Reelin subrepeat regions predicts Reelin binding to carbohydrates

Reelin is a large molecule of the extracellular matrix (ECM) which regulates neuronal positioning during the early stages of cortical development in vertebrate species. The Reelin molecule can be subdivided into a smaller N-terminal domain, showing homology with F-spondin, and a larger C-terminal region containing 8 EGF-like repeats. The localization of Reelin in the ECM, its large dimensions and the modular organization of its primary structure led us to suppose a structure of its modules similar to domains commonly found in ECM proteins such as Agrin, laminins and thrombospondins. We therefore performed a sequence alignment and molecular modeling analysis to study the three-dimensional fold of the Reelin subrepeat regions. Our analysis produces a tentative model of the core region of the Reelin subrepeat sequences and suggests the presence in this 3D model of structural features common to polysaccharide-binding modules which are often found on proteoglycans of the ECM. These findings provide a conceptual framework for further experiments aimed at testing the functions of the EGF-like repeat regions of Reelin.

Structural analysis of viral nucleocapsids by subtraction of partial projections

The nucleocapsid of flavivirus particles does not have a recognizable capsid structure when using icosahedral averaging for cryo-electron microscopy structure determinations. The apparent absence of a definitive capsid structure could be due to a lack of synchronization of the symmetry elements of the external glycoprotein layer with those of the core or because the nucleocapsid does not have the same structure within each particle. A technique has been developed to determine the structure of the capsid, and possibly also of the genome, for icosahedral viruses, such as flaviviruses, using cryo-electron microscopy. The method is applicable not only to the analyses of viral cores, but also to the missing structure of multi-component complexes due to symmetry mismatches. The density contributed by external glycoprotein and membrane layers, derived from previously determined three-dimensional icosahedrally averaged reconstructions, was subtracted from the raw images of the virus particles. The resultant difference images were then used for a three-dimensional reconstruction. After appropriate test data sets were constructed and tested, the procedure was applied to examine the nucleocapsids of flaviviruses, which showed that there is no distinct protein density surrounding the genome. Furthermore, there was no evidence of any icosahedral symmetry within the nucleocapsid core.

Identification of structural domains involved in astrovirus capsid biology

Coat proteins of non-enveloped, icosahedral viruses must perform a variety of functions during their life cycle such as assembly of the coat protein subunits into a closed shell, specific encapsidation of the viral nucleic acid, maturation of the capsid, interaction with host receptors, and disassembly to deliver the genetic information into the newly infected cell. A thorough understanding of the multiple capsid properties at the molecular level is required in order to identify potential targets for antiviral therapy and the prevention of viral disease. The system we have chosen for study is the astrovirus, a family of icosahedral, single-stranded RNA viruses that cause disease in mammals and birds. Very little is known about what regions of the coat protein contribute to the diverse capsid functions. This review will present novel structural predictions for the coat protein sequence of different astrovirus family members. Based on these predictions, we hypothesize that the assembly and RNA packaging functions of the astrovirus coat protein constitutes an individual domain distinct from the determinants required for receptor binding and internalization. Information derived from these structural predictions will serve as an important tool in designing experiments to understand astrovirus biology.

Functional Relevance of Amino Acid Residues Involved in Interactions with Ordered Nucleic Acid in a Spherical Virus

In the spherical virion of the parvovirus minute virus of mice, several amino acid side chains of the capsid were previously found to be involved in interactions with the viral single-stranded DNA molecule. We have individually truncated by mutation to alanine many (ten) of these side chains and analyzed the effects on capsid assembly, stability and conformation, viral DNA encapsidation, and virion infectivity. Mutation of residues Tyr-270, Asp-273, or Asp-474 led to a drastic reduction in infectivity. Mutant Y270A was defective in capsid assembly; mutant D273A formed stable capsids, but it was essentially unable to encapsidate the viral DNA or to externalize the N terminus of the capsid protein VP2, a connected conformational event. Mutation of residues Asp-58, Trp-60, Asn-183, Thr-267, or Lys-471 led to a moderate reduction in infectivity. None of these mutations had an effect on capsid assembly or stability, or on the DNA encapsidation process. However, those five mutant virions were substantially less stable than the parental virion in thermal inactivation assays. The results with this model spherical virus indicate that several capsid residues that are found to be involved in polar interactions or multiple hydrophobic contacts with the viral DNA molecule contribute to preserving the active conformation of the infectious viral particle. Their effect appears to be mediated by the non-covalent interactions they establish with the viral DNA. In addition, at least one acidic residue at each DNA-binding region is needed for DNA packaging.

The RNA of turnip yellow mosaic virus exhibits icosahedral order

Difference electron density maps, based on structure factor amplitudes and experimental phases from crystals of wild-type turnip yellow mosaic virus and those of empty capsids prepared by freeze-thawing, show a large portion of the encapsidated RNA to have an icosahedral distribution. Four unique segments of base-paired, double-helical RNA, one to two turns in length, lie between 33-A and 101-A radius and are organized about either 2-fold or 5-fold icosahedral axes. In addition, single-stranded loops of RNA invade the pentameric and hexameric capsomeres where they contact the interior capsid surface. The remaining RNA, not seen in electron density maps, must serve as connecting links between these secondary structural elements and is likely icosahedrally disordered. The distribution of RNA observed crystallographically appears to be in agreement with models based on biochemical data and secondary structural analyses.