Real-time observation of adsorbate atom motion above a metal surface

Femtosecond Electron-Transfer Dynamics across the D2O/Cs+/Cu(111) Interface: The Impact of Hydrogen Bonding

Hydrogen bonding is essential in electron-transfer processes at water-electrode interfaces. We study the impact of the H-bonding of water as a solvent molecule on real-time electron-transfer dynamics across a Cs+-Cu(111) ion-metal interface using femtosecond time-resolved two-photon photoelectron spectroscopy. We distinguish in the formed water-alkali aggregates two regimes below and above two water molecules per ion. Upon crossing the boundary of these regimes, the lifetime of the excess electron localized transiently at the Cs+ ion increases from 40 to 60 fs, which indicates a reduced alkali-metal interaction. Furthermore, the energy transferred to a dynamic structural rearrangement due to hydration is reduced from 0.3 to 0.2 eV concomitantly. These effects are a consequence of H-bonding in the water-water interaction and the beginning formation of a nanoscale water network. This finding is supported by real-space imaging of the solvatomers and vibrational frequency shifts of the OH stretching and bending modes calculated for these specific interfaces.

Two-Photon Photoemission Spectroscopy and Microscopy for Electronic and Plasmonic Characterizations of Molecularly Designed Organic Surfaces

Functional surfaces decorated with organic molecules and/or nanoclusters (NCs) composed of several tens of atoms are promising for use in future photoelectronic substrates, whose functionalities are governed by molecular local electronic/plasmonic excitations at the interfaces. Here, we combine two-photon photoemission spectroscopy (2P-PES) and microscopy (2P-PEEM) to investigate the local excited-state dynamics at organic surfaces functionalized with NCs. The 2P-PES and 2P-PEEM for organic fullerene (C₆₀) layers on graphite and Au substrates demonstrated photophysical characterization of electronic and plasmonic properties, including propagating surface plasmon polaritons (SPPs). The SPP propagation at the Au interface buried by overlayered C₆₀ can be visualized by Ag_n NC deposition, which enhances plasmon-induced hot electrons, where the threshold number of Ag atoms (n ≥ 9) for the plasmonic response is revealed by the size dependence of 2P-PES for Ag_n NCs on C₆₀ layers.

Hydration at Highly Crowded Interfaces

Understanding the molecular and electronic structure of solvated ions at surfaces requires an analysis of the interactions between the surface, the ions, and the solvent environment on equal footing. Here, we tackle this challenge by exploring the initial stages of Cs^{+} hydration on a Cu(111) surface by combining experiment and theory. Remarkably, we observe "inside-out" solvation of Cs^{+} ions, i.e., their preferential location at the perimeter of the water clusters on the metal surface. In addition, water-Cs complexes containing multiple Cs^{+} ions are observed to form at these surfaces. Established models based on maximum ion-water coordination and conventional solvation models cannot account for this situation, and the complex interplay of microscopic interactions is the key to a fundamental understanding.

Multiphoton excited singlet/triplet mixed self-trapped exciton emission

Multiphoton excited luminescence is of paramount importance in the field of optical detection and biological photonics. Self-trapped exciton (STE) emission with self-absorption-free advantages provide a choice for multiphoton excited luminescence. Herein, multiphoton excited singlet/triplet mixed STE emission with a large full width at half-maximum (617 meV) and Stokes shift (1.29 eV) has been demonstrated in single-crystalline ZnO nanocrystals. Temperature dependent steady state, transient state and time-resolved electron spin resonance spectra demonstrate a mixture of singlet (63%) and triplet (37%) mixed STE emission, which contributes to a high photoluminescence quantum yield (60.5%). First-principles calculations suggest 48.34 meV energy per exciton stored by phonons in the distorted lattice of excited states, and 58 meV singlet-triplet splitting energy for the nanocrystals being consistent with the experimental measurements. The model clarifies long and controversial debates on ZnO emission in visible region, and the multiphoton excited singlet/triplet mixed STE emission is also observed.

Locally varying formation of nanoclusters across a low-intensity ultra-short laser spot

Ultra-short laser illumination is an intriguing tool for engineering material by light. It is usually employed at or above the ablation threshold. Practical applications profit from tailoring surface properties, for instance, by structural changes to the surface layer of an irradiated target. A target-orientated restructuring of surfaces on the nanoscale is much less explored. In particular, an intrinsic intensity variation across a laser spot has not yet been considered or employed. We image the unexpected nanoscale clusters formed on the Cu(111) surface upon illumination of a Cu sample far below its ablation threshold by femtosecond laser light, employing a specifically-developed multi-scale approach. We unravel that these clusters vary significantly in size and shape across the micrometer-scale 400 nm 50 fs laser spot (repetition rate: 250 kHz). There are three qualitatively different regions separated by sharp changes. The observations highlight the importance of local fluence for specific types of nanoclusters. Ultra-short laser illumination represents a non-trivial interplay between photo-thermal and electron-induced mechanisms, transport of heat and electrons, and material properties, which we discuss for identifying the underlying principles. Our study demonstrates that a multitude of as yet unconsidered processes are involved in the tailoring of nanoscale materials by ultra-short laser light.

Ultrafast orbital tomography of a pentacene film using time-resolved momentum microscopy at a FEL

Time-resolved momentum microscopy provides insight into the ultrafast interplay between structural and electronic dynamics. Here we extend orbital tomography into the time domain in combination with time-resolved momentum microscopy at a free-electron laser (FEL) to follow transient photoelectron momentum maps of excited states of a bilayer pentacene film on Ag(110). We use optical pump and FEL probe pulses by keeping FEL source conditions to minimize space charge effects and radiation damage. From the momentum microscopy signal, we obtain time-dependent momentum maps of the excited-state dynamics of both pentacene layers separately. In a combined experimental and theoretical study, we interpret the observed signal for the bottom layer as resulting from the charge redistribution between the molecule and the substrate induced by excitation. We identify that the dynamics of the top pentacene layer resembles excited-state molecular dynamics.

Ultrafast pulses are useful to investigate the electron dynamics in excited atoms, molecules and other complex systems. Here, the authors measure transient photoelectron momentum maps following the free-electron laser pulse-induced ionization of a bilayer pentacene thin film on Ag (110) by using time-resolved orbital tomography.

Competition between Coulomb and van der Waals Interactions in Xe-Cs^{+} Aggregates on Cu(111) Surfaces

Microscopic insight into interactions is a key for understanding the properties of heterogenous interfaces. We analyze local attraction in noncovalently bonded Xe-Cs^{+} aggregates and monolayers on Cu(111) as well as repulsion upon electron transfer. Using two-photon photoemission spectroscopy, scanning tunneling microscopy, and coupled cluster calculations combined with an image-charge model, we explain the intricate impact Xe has on Cs^{+}/Cu(111). We find that attraction between Cs^{+} and Xe counterbalances the screened Coulomb repulsion between Cs^{+} ions on Cu(111). Furthermore, we observe that the Cs 6s electron is repelled from Cu(111) due to xenon's electron density. Together, this yields a dual, i.e., attractive or repulsive, response of Xe depending on the positive or negative charge of the respective counterparticle, which emphasizes the importance of the Coulomb interaction in these systems.

The Influence of a Changing Local Environment during Photoinduced CO2 Dissociation

Though largely influencing the efficiency of a reaction, the molecular-scale details of the local environment of the reactants are experimentally inaccessible hindering an in-depth understanding of a catalyst's reactivity, a prerequisite to maximizing its efficiency. We introduce a method to follow individual molecules and their largely changing environment during a photochemical reaction. The method is illustrated for a rate-limiting step in a photolytic reaction, the dissociation of CO₂ on two catalytically relevant surfaces, Ag(100) and Cu(111). We reveal with a single-molecule resolution how the reactant's surroundings evolve with progressing laser illumination and with it their propensity for dissociation. Counteracting processes lead to a volcano-like reactivity. Our unprecedented local view during a photoinduced reaction opens the avenue for understanding the influence of the products on reaction yields on the nanoscale.

Ultrafast Dynamics of Electronic Resonances in Molecules Adsorbed on Metal Surfaces: A Wave Packet Propagation Approach

We present a wave packet propagation-based method to study the electron dynamics in molecular species in the gas phase and adsorbed on metal surfaces. It is a very general method that can be employed to any system where the electron dynamics is dominated by an active electron and the coupling between the discrete and continuum electronic states is of importance. As an example, one can consider resonant molecule-surface electron transfer or molecular photoionization. Our approach is based on a computational strategy allowing incorporating ab initio inputs from quantum chemistry methods, such as density functional theory, Hartree-Fock, and coupled cluster. Thus, the electronic structure of the molecule is fully taken into account. The electron wave function is represented on a three-dimensional grid in spatial coordinates, and its temporal evolution is obtained from the solution of the time-dependent Schrödinger equation. We illustrate our method with an example of the electron dynamics of anionic states localized on organic molecules adsorbed on metal surfaces. In particular, we study resonant charge transfer from the π* orbitals of three vinyl derivatives (acrylamide, acrylonitrile, and acrolein) adsorbed on a Cu(100) surface. Electron transfer between these lowest unoccupied molecular orbitals and the metal surface is extremely fast, leading to a decay of the population of the molecular anion on the femtosecond timescale. We detail how to analyze the time-dependent electronic wave function in order to obtain the relevant information on the system: the energies and lifetimes of the molecule-localized quasistationary states, their resonant wavefunctions, and the population decay channels. In particular, we demonstrate the effect of the electronic structure of the substrate on the energy and momentum distribution of the hot electrons injected into the metal by the decaying molecular resonance.

Plasmonic Photocatalysts for Sunlight-Driven Reduction of CO2 : Details, Developments, and Perspectives

Plasmonic photocatalysis is among the most efficient processes for the photoreduction of CO₂ into valuable fuels. The formation of localized surface plasmon resonance (LSPR), energy transfer, and surface reaction are the significant steps in this process. LSPR plays an essential role in the performance of plasmonic photocatalysts as it promotes an excellent, light absorption over a broad wavelength range while simultaneously facilitating an efficient energy transfer to semiconductors. The LSPR transfers energy to a semiconductor through various mechanisms, which have both advantages and disadvantages. This work points out four critical features for plasmonic photocatalyst design, that is, plasmonic materials, size, shape of plasmonic nanoparticles (PNPs), and the contact between PNPs and semiconductor. Various developed plasmonic photocatalysts, as well as their photocatalytic performance in CO₂ photoreduction, are reviewed and discussed. Finally, perspectives of advanced architectures and structural engineering for plasmonic photocatalyst design are put forward with high expectations to achieve an efficient CO₂ photoreduction shortly.

Ultrafast Photoemission Electron Microscopy: Imaging Plasmons in Space and Time

Plasmonics is a rapidly growing field spanning research and applications across chemistry, physics, optics, energy harvesting, and medicine. Ultrafast photoemission electron microscopy (PEEM) has demonstrated unprecedented power in the characterization of surface plasmons and other electronic excitations, as it uniquely combines the requisite spatial and temporal resolution, making it ideally suited for 3D space and time coherent imaging of the dynamical plasmonic phenomena on the nanofemto scale. The ability to visualize plasmonic fields evolving at the local speed of light on subwavelength scale with optical phase resolution illuminates old phenomena and opens new directions for growth of plasmonics research. In this review, we guide the reader thorough experimental description of PEEM as a characterization tool for both surface plasmon polaritons and localized plasmons and summarize the exciting progress it has opened by the ultrafast imaging of plasmonic phenomena on the nanofemto scale.

Nonlinear Plasmonic Photoelectron Response of Ag(111)

Photons can excite collective and single-particle excitations in metals; the collective plasmonic excitations are of keen interest in physics, chemistry, optics, and nanotechnology because they enhance coupling of electromagnetic energy and can drive nonlinear processes in electronic materials, particularly where their dielectric function ϵ(ω) approaches zero. We investigate the nonlinear angle-resolved two-photon photoemission (2PP) spectroscopy of the Ag(111) surface through the ϵ(ω) near-zero region. In addition to the Einsteinian single-particle photoemission, the 2PP spectra report unequivocal signatures of nonlocal dielectric, plasmonically enhanced, excitation processes.

Efficient plasmon-hot electron conversion in Ag-CsPbBr3 hybrid nanocrystals

Hybrid metal/semiconductor nano-heterostructures with strong exciton-plasmon coupling have been proposed for applications in hot carrier optoelectronic devices. However, the performance of devices based on this concept has been limited by the poor efficiency of plasmon-hot electron conversion at the metal/semiconductor interface. Here, we report that the efficiency of interfacial hot excitation transfer can be substantially improved in hybrid metal semiconductor nano-heterostructures consisting of perovskite semiconductors. In Ag–CsPbBr₃ nanocrystals, both the plasmon-induced hot electron and the resonant energy transfer processes can occur on a time scale of less than 100 fs with quantum efficiencies of 50 ± 18% and 15 ± 5%, respectively. The markedly high efficiency of hot electron transfer observed here can be ascribed to the increased metal/semiconductor coupling compared with those in conventional systems. These findings suggest that hybrid architectures of metal and perovskite semiconductors may be excellent candidates to achieve highly efficient plasmon-induced hot carrier devices.

Proposed devices exploiting the strong exciton-plasmon coupling are limited by the low efficiency of hot carrier generation. Here, Huang et al. study the efficiencies of different plasmon-hot electron conversion processes in metal/perovskite semiconductor nanocrystals to address this problem.

Ultrafast Transient Dynamics of Adsorbates on Surfaces Deciphered: The Case of CO on Cu(100)

Time-resolved vibrational spectroscopy constitutes an invaluable experimental tool for monitoring hot-carrier-induced surface reactions. However, the absence of a full understanding of the precise microscopic mechanisms causing the transient spectral changes has limited its applicability. Here we introduce a robust first-principles theoretical framework that successfully explains both the nonthermal frequency and linewidth changes of the CO internal stretch mode on Cu(100) induced by femtosecond laser pulses. Two distinct processes engender the changes: electron-hole pair excitations underlie the nonthermal frequency shifts, while electron-mediated vibrational mode coupling gives rise to linewidth changes. Furthermore, the origin and precise sequence of coupling events are finally identified.

Atom-specific activation in CO oxidation

We report on atom-specific activation of CO oxidation on Ru(0001) via resonant X-ray excitation. We show that resonant 1s core-level excitation of atomically adsorbed oxygen in the co-adsorbed phase of CO and oxygen directly drives CO oxidation. We separate this direct resonant channel from indirectly driven oxidation via X-ray induced substrate heating. Based on density functional theory calculations, we identify the valence-excited state created by the Auger decay as the driving electronic state for direct CO oxidation. We utilized the fresh-slice multi-pulse mode at the Linac Coherent Light Source that provided time-overlapped and 30 fs delayed pairs of soft X-ray pulses and discuss the prospects of femtosecond X-ray pump X-ray spectroscopy probe, as well as X-ray two-pulse correlation measurements for fundamental investigations of chemical reactions via selective X-ray excitation.

Coherent Electron Transfer at the Ag/Graphite Heterojunction Interface

Charge transfer in transduction of light to electrical or chemical energy at heterojunctions of metals with semiconductors or semimetals is believed to occur by photogenerated hot electrons in metal undergoing incoherent internal photoemission through the heterojunction interface. Charge transfer, however, can also occur coherently by dipole coupling of electronic bands at the heterojunction interface. Microscopic physical insights into how transfer occurs can be elucidated by following the coherent polarization of the donor and acceptor states on the time scale of electronic dephasing. By time-resolved multiphoton photoemission spectroscopy (MPP), we investigate the coherent electron transfer from an interface state that forms upon chemisorption of Ag nanoclusters onto graphite to a σ symmetry interlayer band of graphite. Multidimensional MPP spectroscopy reveals a resonant two-photon transition, which dephases within 10 fs completing the coherent transfer.

Ultrafast Microscopy: Imaging Light with Photoelectrons on the Nano-Femto Scale

Experimental methods for ultrafast microscopy are advancing rapidly. Promising methods combine ultrafast laser excitation with electron-based imaging or rely on super-resolution optical techniques to enable probing of matter on the nano-femto scale. Among several actively developed methods, ultrafast time-resolved photoemission electron microscopy provides several advantages, among which the foremost are that time resolution is limited only by the laser source and it is immediately capable of probing of coherent phenomena in solid-state materials and surfaces. Here we present recent progress in interference imaging of plasmonic phenomena in metal nanostructures enabled by combining a broadly tunable femtosecond laser excitation source with a low-energy electron microscope.

Direct Pathway to Molecular Photodissociation on Metal Surfaces Using Visible Light

We demonstrate molecular photodissociation on single-crystalline metal substrates, driven by visible-light irradiation. The visible-light-induced photodissociation on metal substrates has long been thought to never occur, either because visible-light energy is much smaller than the optical energy gap between the frontier electronic states of the molecule or because the molecular excited states have short lifetimes due to the strong hybridization between the adsorbate molecular orbitals (MOs) and metal substrate. The S-S bond in dimethyl disulfide adsorbed on both Cu(111) and Ag(111) surfaces was dissociated through direct electronic excitation from the HOMO-derived MO (the nonbonding lone-pair type orbitals on the S atoms (n_S)) to the LUMO-derived MO (the antibonding orbital localized on the S-S bond (σ*_SS)) by irradiation with visible light. A combination of scanning tunneling microscopy and density functional theory calculations revealed that visible-light-induced photodissociation becomes possible due to the interfacial electronic structures constructed by the hybridization between molecular orbitals and the metal substrate states. The molecule-metal hybridization decreases the gap between the HOMO- and LUMO-derived MOs into the visible-light energy region and forms LUMO-derived MOs that have less overlap with the metal substrate, which results in longer excited-state lifetimes.

Progress and Perspectives of Plasmon-Enhanced Solar Energy Conversion

Plasmonics allows extraordinary control of light, making it attractive for application in solar energy harvesting. In metal-semiconductor heterojunctions, plasmons can enhance photoconversion in the semiconductor via three mechanisms, including light trapping, hot electron/hole transfer, and plasmon-induced resonance energy transfer (PIRET). To understand the plasmonic enhancement, the metal's geometry, constituent metal, and interface must be viewed in terms of the effects on the plasmon's dephasing and decay route. To simplify design of plasmonic metal-semiconductor heterojunctions for high-efficiency solar energy conversion, the parameters controlling the plasmonic enhancement can be distilled to the dephasing time. The plasmonic geometry can then be further refined to optimize hot carrier transfer, PIRET, or light trapping.

Energy transfer in plasmonic photocatalytic composites

Among the many novel photocatalytic systems developed in very recent years, plasmonic photocatalytic composites possess great potential for use in applications and are one of the most intensively investigated photocatalytic systems owing to their high solar energy utilization efficiency. In these composites, the plasmonic nanoparticles (PNPs) efficiently absorb solar light through localized surface plasmon resonance and convert it into energetic electrons and holes in the nearby semiconductor. This energy transfer from PNPs to semiconductors plays a decisive role in the overall photocatalytic performance. Thus, the underlying physical mechanism is of great scientific and technological importance and is one of the hottest topics in the area of plasmonic photocatalysts. In this review, we examine the very recent advances in understanding the energy transfer process in plasmonic photocatalytic composites, describing both the theoretical basis of this process and experimental demonstrations. The factors that affect the energy transfer efficiencies and how to improve the efficiencies to yield better photocatalytic performance are also discussed. Furthermore, comparisons are made between the various energy transfer processes, emphasizing their limitations/benefits for efficient operation of plasmonic photocatalysts.

Quantum control of isomerization by robust navigation in the energy spectrum

In this paper, we present a detailed study on the application of the quantum control technique of navigation in the energy spectrum to chemical isomerization processes, namely, CN-Li⇆ Li-CN. This technique is based on the controlled time variation of a Hamiltonian parameter, an external uniform electric field in our case. The main result of our work establishes that the navigation involved in the method is robust, in the sense that quite sizable deviations from a pre-established control parameter time profile can be introduced and still get good final results. This is specially relevant thinking of a experimental implementation of the method.

CHARGE TRANSFER. Efficient hot-electron transfer by a plasmon-induced interfacial charge-transfer transition

Plasmon-induced hot-electron transfer from metal nanostructures is a potential new paradigm for solar energy conversion; however, the reported efficiencies of devices based on this concept are often low because of the loss of hot electrons via ultrafast electron-electron scattering. We propose a pathway, called the plasmon-induced interfacial charge-transfer transition (PICTT), that enables the decay of a plasmon by directly exciting an electron from the metal to a strongly coupled acceptor. We demonstrated this concept in cadmium selenide nanorods with gold tips, in which the gold plasmon was strongly damped by cadmium selenide through interfacial electron transfer. The quantum efficiency of the PICTT process was high (>24%), independent of excitation photon energy over a ~1-electron volt range, and dependent on the excitation polarization.

Following the molecular motion of near-resonant excited CO on Pt(111): A simulated x-ray photoelectron diffraction study based on molecular dynamics calculations

A THz-pump and x-ray-probe experiment is simulated where x-ray photoelectron diffraction (XPD) patterns record the coherent vibrational motion of carbon monoxide molecules adsorbed on a Pt(111) surface. Using molecular dynamics simulations, the excitation of frustrated wagging-type motion of the CO molecules by a few-cycle pulse of 2 THz radiation is calculated. From the atomic coordinates, the time-resolved XPD patterns of the C 1s core level photoelectrons are generated. Due to the direct structural information in these data provided by the forward scattering maximum along the carbon-oxygen direction, the sequence of these patterns represents the equivalent of a molecular movie.

Ultrafast electron dynamics at water covered alkali adatoms adsorbed on Cu(111)

Here we report on the ultrafast electron dynamics of the alkalis Na, K, and Cs coadsorbed with D2O on Cu(111) surfaces, which we investigated with femtosecond time-resolved two-photon photoemission. The well known transient electronic binding energy stabilization in bare adsorbed alkalis is enhanced by the presence of water which acts as a solvent and increases the transient energy gain. We observe for all adsorbed alkalis a transient binding energy stabilization of 100-300 meV. The stabilization rates range from 1 to 2 eV ps(-1). Here the heavier alkali exhibits a slower stabilization which we explain by their weaker static alkali-water interaction observed in thermal desorption spectroscopy. The population dynamics at low water coverage is described by a single exponential. With increasing water coverage the behavior becomes non-exponential suggesting an additional excited state due to electron solvation.

Controlling catalytic selectivity on metal nanoparticles by direct photoexcitation of adsorbate-metal bonds

Engineering heterogeneous metal catalysts for high selectivity in thermal driven reactions typically involves the synthesis of nanostructures with well-controlled geometries and compositions. However, inherent relationships between the energetics of elementary steps limit the control of catalytic selectivity through these approaches. Photon excitation of metal catalysts can induce chemical reactivity channels that cannot be accessed using thermal energy, although the potential for targeted activation of adsorbate-metal bonds is limited because the processes of photon absorption and adsorbate-metal bond photoexcitation are typically separated spatially. Here, we show that the use of sub-5-nanometer metal particles as photocatalysts enables direct photoexcitation of hybridized adsorbate-metal states as the dominant mechanism driving photochemistry. Activation of targeted adsorbate-metal bonds through direct photoexcitation of hybridized electronic states enabled selectivity control in preferential CO oxidation in H2 rich streams. This mechanism opens new avenues to drive selective catalytic reactions that cannot be achieved using thermal energy.

Electrochemical tuning of MoS2 nanoparticles on three-dimensional substrate for efficient hydrogen evolution

Molybdenum disulfide (MoS2) with the two-dimensional layered structure has been widely studied as an advanced catalyst for hydrogen evolution reaction (HER). Intercalating guest species into the van der Waals gaps of MoS2 has been demonstrated as an effective approach to tune the electronic structure and consequently improve the HER catalytic activity. In this work, by constructing nanostructured MoS2 particles with largely exposed edge sites on the three-dimensional substrate and subsequently conducting Li electrochemical intercalation and exfoliation processes, an ultrahigh HER performance with 200 mA/cm(2) cathodic current density at only 200 mV overpotential is achieved. We propose that both the high surface area nanostructure and the 2H semiconducting to 1T metallic phase transition of MoS2 are responsible for the outstanding catalytic activity. Electrochemical stability test further confirms the long-term operation of the catalyst.

Photoexcitation of adsorbates on metal surfaces: one-step or three-step

In this essay we discuss the light-matter interactions at molecule-covered metal surfaces that initiate surface photochemistry. The hot-electron mechanism for surface photochemistry, whereby the absorption of light by a metal surface creates an electron-hole pair, and the hot electron scatters through an unoccupied resonance of adsorbate to initiate nuclear dynamics leading to photochemistry, has become widely accepted. Yet, ultrafast spectroscopic measurements of molecule-surface electronic structure and photoexcitation dynamics provide scant support for the hot electron mechanism. Instead, in most cases the adsorbate resonances are excited through photoinduced substrate-to-adsorbate charge transfer. Based on recent studies of the role of coherence in adsorbate photoexcitation, as measured by the optical phase and momentum resolved two-photon photoemission measurements, we examine critically the hot electron mechanism, and propose an alternative description based on direct charge transfer of electrons from the substrate to adsorbate. The advantage of this more quantum mechanically rigorous description is that it informs how material properties of the substrate and adsorbate, as well as their interaction, influence the frequency dependent probability of photoexcitation and ultimately how light can be used to probe and control surface femtochemistry.

Current-driven dynamics in molecular junctions: endohedral fullerenes

We introduce a new paradigm for single molecule devices based on electronic actuation of the internal atom/cluster motion within a fullerene cage. By combining electronic structure calculations with dynamical simulations, we explore current-triggered dynamics in endohedrally doped fullerene molecular junctions. Inelastic electron tunneling through a Li atom localized resonance in the Au-Li@C(60)-Au junction initiates fascinating, strongly coupled 2D dynamics, wherein the Li atom exhibits large amplitude oscillation with respect to the fullerene wall and the fullerene cage bounces between the gold electrodes, slightly perturbed by the embedded atom motion. Implications to the fields of single molecule electronics and nanoelectromechanical systems are discussed.

Localized description of surface energy gap effects in the resonant charge exchange between atoms and surfaces

The resonant charge exchange between atoms and surfaces is described by considering a localized atomistic view of the solid within the Anderson model. The presence of a surface energy gap is treated within a simplified tight-binding model of the solid, and a proper calculation of the Hamiltonian terms based on a LCAO expansion of the solid eigenstates is performed. It is found that interference terms jointly with a surface projected gap maximum at the Γ point and the Fermi level inside it, lead to hybridization widths negligible around the Fermi level. This result can explain experimental observations related to long-lived adsorbate states and anomalous neutral fractions of low energy ions in alkali/Cu(111) systems.

Time-dependent electron phenomena at surfaces

Femtosecond and subfemtosecond time scales typically rule electron dynamics at metal surfaces. Recent advance in experimental techniques permits now remarkable precision in the description of these processes. In particular, shorter time scales, smaller system sizes, and spin-dependent effects are current targets of interest. In this article, we use state-of-the-art theoretical methods to analyze these refined features of electron dynamics. We show that the screening of localized charges at metal surfaces is created locally in the attosecond time scale, while collective excitations transfer the perturbation to larger distances in longer time scales. We predict that the elastic width of the resonance in excited alkali adsorbates on ferromagnetic surfaces can depend on spin orientation in a counterintuitive way. Finally, we quantitatively evaluate the electron-electron and electron-phonon contributions to the electronic excited states widths in ultrathin metal layers. We conclude that confinement and spin effects are key factors in the behavior of electron dynamics at metal surfaces.

Pi resonance of chemisorbed alkali atoms on noble metals

We have performed a joint experimental and theoretical study of the unoccupied electronic structure of alkali adsorbates on the (111) surfaces of Cu and Ag. Combining angle- and time-resolved two-photon photoemission spectroscopy with wave packet propagation calculations we show that, along with the well known sigma resonance oriented along the surface normal, there exist long-lived alkali-localized resonances oriented parallel to the surface (pi symmetry). These new resonances are stabilized by the projected band gap of the substrate and emerge primarily from the mixing of the p and d Rydberg orbitals of the free alkali atom modified by the interaction with the surface.