A model for fibrinogen: domains and sequence

Unveiling the Architecture of Human Fibrinogen: A Full-Length Structural Model

Fibrinogen is a protein involved in the haemostasis process playing a central role by forming the fibrin clot. An understanding of protein structure is vital to determining biological function. Despite many studies on the fibrin polymerization process, its molecular mechanism remains elusive mainly due to the absence of a full-length three-dimensional model of human fibrinogen. Amino- and carboxyl-terminal regions of the three pairs of chains that form this molecule are missing in the crystallographic structure, being the carboxyl-terminal of the Aα chain the most affected with a section of more than 400 amino acids missing. To have a full structure of the fibrinogen molecule would allow the creation of a model of protofibril, shedding light into the fibrin formation process through computational techniques such as molecular dynamics simulations. Absent regions were explored using homology modelling and coarse-grained molecular dynamics simulations. Later on, the model was refined and stabilized with atomistic molecular dynamic simulations. In the present study, we obtained the first realistic full-length structure of fibrinogen, with features in accordance with previous results obtained by experimental techniques.

Mechanism of skull base osteoradionecrosis explored through laboratory assessment with propensity score-matched analysis

Skull base osteoradionecrosis (sbORN) is a severe complication of radiotherapy (RT) in patients with nasopharyngeal carcinoma (NPC) that can severely affect quality of life (QOL) and may even be life-threatening. The etiology and pathogenesis of sbORN remain largely unknown or uncertain. Therefore, this study aimed to identify potential risk factors for sbORN by analyzing the laboratory assessments of patients to enable early clinical interventions. This retrospective case-control study reviewed NPC patients who were pathologically diagnosed with sbORN after primary radical radiotherapy. These patients were matched 1:1 with propensity scores for patients without sbORN at our center. The impact of laboratory examination indexes on sbORN occurrence was assessed using both univariate and multivariate logistic regression analyses. We reviewed 1,200 NPC patients who were followed up in our department from 2010 to 2020; a total of 57 patients met the inclusion criteria. Each patient underwent endoscopic and pathological examinations, which confirmed the diagnosis. In addition, 98 patients without sbORN were also collected and matched 1:1 by propensity score matching, resulting in the inclusion of 38 patients. Univariate logistic regression analysis revealed statistically significant differences in hemorrhage (HB), erythrocytes (RBC), albumin (Alb), platelets (PLT), indirect bilirubin (IBil), globulin (Glo), aspartate aminotransferase (AST), and fibrinogen (Fg) between the two groups (p < 0.05). Multivariate logistic regression analysis revealed statistically significant differences only for Fg (p < 0.05). Receiver operating characteristic (ROC) curve analysis further demonstrated the diagnostic utility of Fg, yielding an area under the curve (AUC) of 0.829, with specificity and sensitivity values of 0.842 and 0.711, respectively. The occurrence of sbORN was closely associated with elevated plasma Fg levels, suggesting that high plasma Fg may be a potential risk factor for sbORN. Plasma Fg has a certain diagnostic value for sbORN and can be used as a supplementary diagnostic method.

A role of methionines in the functioning of oxidatively modified fibrinogen

Posttranslational modifications in fibrinogen resulting from induced oxidation or oxidative stress in the organism can have deleterious influence on optimal functioning of fibrinogen, causing a disturbance in assembly and properties of fibrin. The protective mechanism supporting the ability of fibrinogen to function in ROS-generating environment remains completely unexplored. The effects of very low and moderately low HOCl/-OCl concentrations on fibrinogen oxidative modifications, the fibrin network structure as well as the kinetics of both fibrinogen-to-fibrin conversion and fibrin hydrolysis have been explored in the current study. As opposed to 25 Μm, HOCl/-OCl, 10 μM HOCl/-OCl did not affect the functional activity of fibrinogen. It is shown for the first time that a number of Met residues, AαMet476, AαMet517, AαMet584, BβMet367, γMet264, and γMet94, identified in 10 μM HOCl/-OCl fibrinogen by the HPLC-MS/MS method, operate as ROS scavengers, performing an important antioxidant function. In turn, this indicates that the fibrinogen structure is adapted to the detrimental action of ROS. The results obtained in our study provide evidence for a protective mechanism responsible for maintaining the structure and functioning of fibrinogen molecules in the bloodstream under conditions of mild and moderate oxidative stress.

Congenital fibrinogen disorders: Strengthening genotype-phenotype correlations through novel genetic diagnostic tools

Congenital fibrinogen disorders or CFDs are heterogenous, both in clinical manifestation and array of culprit molecular lesions. Correlations between phenotype and genotype remain poorly defined. This review examines the genetic landscape discovered to date for this rare condition. The question of a possible oligogenic model of inheritance influencing phenotypic heterogeneity is raised, with discussion of the benefits and challenges of sequencing technology used to enhance discovery in this space. Considerable work lies ahead in order to achieve diagnostic and prognostic precision and subsequently provide targeted management to this complex cohort of patients.

Cellular mechanisms of fibrin (ogen): insight from neurodegenerative diseases

Neurodegenerative diseases are prevalent and currently incurable conditions that progressively impair cognitive, behavioral, and psychiatric functions of the central or peripheral nervous system. Fibrinogen, a macromolecular glycoprotein, plays a crucial role in the inflammatory response and tissue repair in the human body and interacts with various nervous system cells due to its unique molecular structure. Accumulating evidence suggests that fibrinogen deposits in the brains of patients with neurodegenerative diseases. By regulating pathophysiological mechanisms and signaling pathways, fibrinogen can exacerbate the neuro-pathological features of neurodegenerative diseases, while depletion of fibrinogen contributes to the amelioration of cognitive function impairment in patients. This review comprehensively summarizes the molecular mechanisms and biological functions of fibrinogen in central nervous system cells and neurodegenerative diseases, including Alzheimer's disease, Multiple Sclerosis, Parkinson's disease, Vascular dementia, Huntington's disease, and Amyotrophic Lateral Sclerosis. Additionally, we discuss the potential of fibrinogen-related treatments in the management of neurodegenerative disorders.

Systematic mapping of the conformational landscape and dynamism of soluble fibrinogen

BACKGROUND

Fibrinogen is a soluble, multisubunit, and multidomain dimeric protein, which, upon its proteolytic cleavage by thrombin, is converted to insoluble fibrin, initiating polymerization that substantially contributes to clot growth. Fibrinogen contains numerous, transiently accessible "cryptic" epitopes for hemostatic and immunologic proteins, suggesting that fibrinogen exhibits conformational flexibility, which may play functional roles in its temporal and spatial interactions. Hitherto, there have been limited integrative approaches characterizing the solution structure and internal flexibility of fibrinogen.

METHODS

Here, utilizing a multipronged, biophysical approach involving 2 solution-based techniques, temperature-dependent hydrogen-deuterium exchange mass spectrometry and small angle X-ray scattering, corroborated by negative stain electron microscopy, we present a holistic, conformationally dynamic model of human fibrinogen in solution.

RESULTS

Our data reveal 4 major and distinct conformations of fibrinogen accommodated by a high degree of internal protein flexibility along its central scaffold. We propose that the fibrinogen structure in the solution consists of a complex, conformational landscape with multiple local minima. This is further supported by the location of numerous point mutations that are linked to dysfibrinogenemia and posttranslational modifications, residing near the identified fibrinogen flexions.

CONCLUSION

This work provides a molecular basis for the structural "dynamism" of fibrinogen that is expected to influence the broad swath of its functionally diverse macromolecular interactions and fine-tune the structural and mechanical properties of blood clots.

The Story of the Fibrin(ogen) αC-Domains: Evolution of Our View on Their Structure and Interactions

Although much has been established concerning the overall structure and function of fibrinogen, much less has been known about its two αC regions, each consisting of an αC-connector and an αC-domain, but new information has been accumulating. This review summarizes the state of our current knowledge of the structure and interactions of fibrinogen's αC regions. A series of studies with isolated αC regions and their fragments demonstrated that the αC-domain forms compact ordered structures consisting of N- and C-terminal subdomains including β sheets and suggested that the αC-connector has a poly(L-proline) type II structure. Functionally, the αC-domains interact intramolecularly with each other and with the central region of the molecule, first demonstrated by electron microscopy and then quantified by optical trap force spectroscopy. Upon conversion of fibrinogen into fibrin, the αC-domains switch from intra- to intermolecular interactions to form ordered αC polymers. The formation of αC polymers occurs mainly through the homophilic interaction between the N-terminal subdomains; interaction between the C-terminal subdomains and the αC-connectors also contributes to this process. Considerable evidence supports the idea that the αC-regions accelerate fibrin polymerization and affect the final structure of fibrin clots. The interactions between αC-regions are important for the mechanical properties of clots, increasing their stiffness and extensibility. Conversion of fibrinogen into fibrin results in exposure of multiple binding sites in its αC regions, providing interaction of fibrin with different proteins and cell types during hemostasis and wound healing. This heretofore mysterious part of the fibrinogen molecule is finally giving up its secrets.

In Vitro Antithrombotic, Hematological Toxicity, and Inhibitor Studies of Protocatechuic, Isovanillic, and p-Hydroxybenzoic Acids from Maclura Tricuspidata (Carr.) Bur

In blood coagulation, circulating platelets and coagulation factors are crucial for the primary process because thrombi are generated by fibrin clotting with fibrinogen, thrombin, FXIIIa, and platelet activation. Therefore, strategies to reduce the activity of key coagulation factors, or interfere with their functions and delay the activation of platelets can be used as important tools to suppress excessive blood clot formation and platelet hyperactivation. This study examined the antithrombotic activity and hematological toxicity of PA, IVA, and 4-HA isolated from M. tricuspidata (Carr.) Bur in several in vitro experiments and inhibitor assays. We found that PA, IVA, and 4-HA attenuated the formation of fibrin polymers/clots and degraded the blood clots. These compounds inhibited the activities of procoagulant proteases and fibrinoligase, and prolonged the coagulation time. There was a significant reduction in platelet function and ATP or serotonin levels in thrombin-activated platelets. An inhibitor study showed that PA exhibited a mixed inhibition type for thrombin, an uncompetitive inhibition type for FXa, and a non-competitive inhibition type for FXIIIa and IVA, while 4-HA exhibited an uncompetitive inhibition type for thrombin and non-competitive inhibition type for FXa and FXIIIa. These three compounds (up to 50 μg/mL) were not toxic to blood cells.

Development of a mesoscopic framework spanning nanoscale protofibril dynamics to macro-scale fibrin clot formation

Thrombi form a micro-scale fibrin network consisting of an interlinked structure of nanoscale protofibrils, resulting in haemostasis. It is theorized that the mechanical effect of the fibrin clot is caused by the polymeric protofibrils between crosslinks, or to their dynamics on a nanoscale order. Despite a number of studies, however, it is still unknown, how the nanoscale protofibril dynamics affect the formation of the macro-scale fibrin clot and thus its mechanical properties. A mesoscopic framework would be useful to tackle this multi-scale problem, but it has not yet been established. We thus propose a minimal mesoscopic model for protofibrils based on Brownian dynamics, and performed numerical simulations of protofibril aggregation. We also performed stretch tests of polymeric protofibrils to quantify the elasticity of fibrin clots. Our model results successfully captured the conformational properties of aggregated protofibrils, e.g., strain-hardening response. Furthermore, the results suggest that the bending stiffness of individual protofibrils increases to resist extension.

The Role of pH and Ionic Strength in the Attraction-Repulsion Balance of Fibrinogen Interactions

Fibrinogen (Fg) self-assembly is sensitive to the physicochemical properties of an environment like pH and ionic strength. These parameters tune the direction and strength of noncovalent physical driving forces determining protein intermolecular interactions. The attraction-repulsion balance in intermolecular interactions of the multidomain protein Fg at pH values 3.5, 7.4, and 9.5 and varying ionic strengths of the water medium has been analyzed by the complex diffusive approach, proposed by us previously. The concentration dependence of protein collective diffusion was analyzed within the phenomenological approach, based on the frictional formalism of nonequilibrium thermodynamics proposed by H. Vink. The analysis of protein diffusion data has shown the fundamental difference in the physical nature and direction of interaction forces between protein molecules at different conditions. The paired interaction potential of protein molecules was characterized in terms of second virial coefficients and Hamaker constants within the Deryaguin-Landau-Verwey-Overbeek theory and the "porous" colloid particle model. Our results indicated the maximum Hamaker constant and dominance of the van der Waals attraction between Fg molecules at pH 7.4. The increase in pH up to 9.5 results in the zero values of the second virial coefficient and Hamaker constant, corresponding to the full reciprocal compensation for electrostatic repulsion and van der Waals attraction. In the acidic medium (pH 3.5), the strong electrostatic repulsion substantially exceeds the van der Waals attraction. A high ionic strength is characterized by a significant decrease of all intermolecular interactions, which is expressed in almost zero values of virial coefficients and the Hamaker constant. Thus, it is experimentally shown that the physiological conditions of the Fg environment (pH 7.4 and slight ionic strength) provide a high probability for peak physical attraction between fibrinogen molecules, which is used in nature to facilitate blood clotting.

Hypochlorite-induced oxidation of fibrinogen: Effects on its thermal denaturation and fibrin structure

BACKGROUND

Human fibrinogen, which plays a key role in plasma haemostasis, is a highly vulnerable target for oxidants. Fibrinogen undergoes posttranslational modifications that can potentially disrupt protein structure and function.

METHODS

For the first time, by differential scanning calorimetry, dynamic and elastic light scattering and confocal laser scanning microscopy, the consequences of HOCl/^-OCl-induced oxidation of fibrinogen on its thermal denaturation, molecular size distribution and fibrin clot network have been explored.

RESULTS

Within a wide range of HOCl/^-OCl concentrations (50-300 μM), the molecular size distribution remained unimodal; however, the average size of the hydrated molecules decreased. HOCl/^-OCl-induced oxidation of fibrinogen resulted in the diminished thermal stability of regions D and E. As evidenced by elastic light scattering and confocal laser scanning microscopy, HOCl/^-OCl caused the formation of abnormal fibrin with a decreased diameter of individual fibres.

CONCLUSIONS

The current results along with data from previous studies enable one to conclude that the effect of HOCl/^-OCl-mediated oxidation on the thermal stability of region D is influenced directly by oxidative damage to the D region structure. Since the E region is not subjected to oxidative modification, its structural damage is likely to be mediated by the oxidation of other protein structures, in particular α-helical coiled-coils.

GENERAL SIGNIFICANCE

The experimental findings acquired in the current study could help to elucidate the consequences of oxidative stress in vivo on damage to the structure of fibrinogen/fibrin under the action of different ROS species.

Novel variant fibrinogen γp.C352R produced hypodysfibrinogenemia leading to a bleeding episode and failure of infertility treatment

INTRODUCTION

We identified a patient with a novel heterozygous variant fibrinogen, γp.C352R (Niigata II; N-II), who had a bleeding episode and failed infertility treatment and was suspected to have hypodysfibrinogenemia based on low and discordant fibrinogen levels (functional assay 0.33 g/L, immunological assay 0.91 g/L). We analyzed the mechanism of this rare phenotype of a congenital fibrinogen disorder.

MATERIALS AND METHODS

Patient plasma fibrinogen was purified and protein characterization and thrombin-catalyzed fibrin polymerization performed. Recombinant fibrinogen-producing Chinese hamster ovary (CHO) cells were established and the assembly and secretion of variant fibrinogen analyzed by ELISA and western blotting.

RESULTS

Purified N-II plasma fibrinogen had a small lower molecular weight band below the normal γ-chain and slightly reduced fibrin polymerization. A limited proportion of p.C352R fibrinogen was secreted into the culture medium of established CHO cell lines, but the γ-chain of p.C352R was synthesized and variant fibrinogen was assembled inside the cells.

CONCLUSION

We demonstrated that fibrinogen N-II, γp.C352R was associated with markedly reduced secretion of variant fibrinogen from CHO cells, that fibrin polymerization of purified plasma fibrinogen was only slightly affected, and that fibrinogen N-II produces hypodysfibrinogenemia in plasma.

Methylglyoxal mediated glycation leads to neo-epitopes generation in fibrinogen: Role in the induction of adaptive immune response

In diabetes mellitus, hyperglycemia mediated non-enzymatic glycosylation of proteins results in the pathogenesis of diabetes-associated secondary complications via the generation of advanced glycation end products (AGEs). The focus of this study is to reveal the immunological aspects of methylglyoxal (MG) mediated glycation of fibrinogen protein. The induced immunogenicity of modified fibrinogen is analyzed by direct binding and inhibition ELISA. Direct binding ELISA confirmed that MG glycated fibrinogen (MG-Fib) is highly immunogenic and induces a high titer of antibodies in comparison to its native analog. Cross-reactivity and antigen-binding specificity of induced antibodies were confirmed by inhibition ELISA. The enhanced affinity of immunoglobulin G (IgG) from immunized rabbits' sera and MG glycated fibrinogen is probably the aftermath of neo-epitopes generation in the native structure of protein upon modification. Thus, we deduce that under the glycative stress, MG-mediated structural alterations in fibrinogen could induce the generation of antibodies which might serve as a potential biomarker in diabetes mellitus and its associated secondary disorders.

Fibrinogen and Fibrin

Fibrinogen is a large glycoprotein, synthesized primarily in the liver. With a normal plasma concentration of 1.5-3.5 g/L, fibrinogen is the most abundant blood coagulation factor. The final stage of blood clot formation is the conversion of soluble fibrinogen to insoluble fibrin, the polymeric scaffold for blood clots that stop bleeding (a protective reaction called hemostasis) or obstruct blood vessels (pathological thrombosis). Fibrin is a viscoelastic polymer and the structural and mechanical properties of the fibrin scaffold determine its effectiveness in hemostasis and the development and outcome of thrombotic complications. Fibrin polymerization comprises a number of consecutive reactions, each affecting the ultimate 3D porous network structure. The physical properties of fibrin clots are determined by structural features at the individual fibrin molecule, fibrin fiber, network, and whole clot levels and are among the most important functional characteristics, enabling the blood clot to withstand arterial blood flow, platelet-driven clot contraction, and other dynamic forces. This chapter describes the molecular structure of fibrinogen, the conversion of fibrinogen to fibrin, the mechanical properties of fibrin as well as its structural origins and lastly provides evidence for the role of altered fibrin clot properties in both thrombosis and bleeding.

Novel fibrin-fibronectin matrix accelerates mice skin wound healing

Plasma fibrinogen (F1) and fibronectin (pFN) polymerize to form a fibrin clot that is both a hemostatic and provisional matrix for wound healing. About 90% of plasma F1 has a homodimeric pair of γ chains (γγF1), and 10% has a heterodimeric pair of γ and more acidic γ' chains (γγ'F1). We have synthesized a novel fibrin matrix exclusively from a 1:1 (molar ratio) complex of γγ'F1 and pFN in the presence of highly active thrombin and recombinant Factor XIII (rFXIIIa). In this matrix, the fibrin nanofibers were decorated with pFN nanoclusters (termed γγ'F1:pFN fibrin). In contrast, fibrin made from 1:1 mixture of γγF1 and pFN formed a sporadic distribution of "pFN droplets" (termed γγF1+pFN fibrin). The γγ'F1:pFN fibrin enhanced the adhesion of primary human umbilical vein endothelium cells (HUVECs) relative to the γγF1+FN fibrin. Three dimensional (3D) culturing showed that the γγ'F1:pFN complex fibrin matrix enhanced the proliferation of both HUVECs and primary human fibroblasts. HUVECs in the 3D γγ'F1:pFN fibrin exhibited a starkly enhanced vascular morphogenesis while an apoptotic growth profile was observed in the γγF1+pFN fibrin. Relative to γγF1+pFN fibrin, mouse dermal wounds that were sealed by γγ'F1:pFN fibrin exhibited accelerated and enhanced healing. This study suggests that a 3D pFN presentation on a fibrin matrix promotes wound healing.

In situ detection of protein corona on single particle by rotational diffusivity

Since the formation of protein corona inevitably leads to an increase in the particle size, it is important to develop technologies enabling in situ monitoring of the size change of nanoparticles. Traditional diffusion-based methods for particle size measurement focused on the translational diffusion coefficient; however, the detection sensitivity can be improved by determining the rotational diffusion coefficient, which has a cubic dependence on the particle radius. Here, using an optically anisotropic gold nanorod as the rotational probe and using high-speed dark-field microscopy, we can extract the rotational diffusion coefficient of a single nanorod and monitor the size change induced by the formation of protein corona in situ in real time. We successfully determined the thermodynamic parameters for the interactions between AuNRs with BSA and fibrinogen, and also studied corona formation in complex media and with AuNRs with different surface chemistry. This work would provide new avenues for the study of interactions between nanomedicines and proteins.

Recent progress regarding kaempferol for the treatment of various diseases

Kaempferol, also known as kaempferol-3 or kaempferide, is a flavonoid compound that naturally occurs in tea, as well as numerous common vegetables and fruits, including beans, broccoli, cabbage, gooseberries, grapes, kale, strawberries, tomatoes, citrus fruits, brussel sprouts, apples and grapefruit. The present review mainly summarizes the application of kaempferol in treating diseases and the underlying mechanisms that are currently being studied. Due to its anti-inflammatory properties, it may be used to treat numerous acute and chronic inflammation-induced diseases, including intervertebral disc degeneration and colitis, as well as post-menopausal bone loss and acute lung injury. In addition, it has beneficial effects against cancer, liver injury, obesity and diabetes, inhibits vascular endothelial inflammation, protects the cranial nerve and heart function, and may be used for treating fibroproliferative disorders, including hypertrophic scar.

A Mathematical Model of Bivalent Binding Suggests Physical Trapping of Thrombin within Fibrin Fibers

Thrombin is an enzyme that plays many important roles in the blood clotting process; it activates platelets, cleaves coagulation proteins within feedback loops, and cleaves fibrinogen into fibrin, which polymerizes into fibers to form a stabilizing gel matrix in and around growing clots. Thrombin also binds to the formed fibrin matrix, but this interaction is not well understood. Thrombin-fibrin binding is often described as two independent, single-step binding events, one high-affinity and one low-affinity. However, kinetic schemes describing these single-step binding events do not explain experimentally-observed residency times of fibrin-bound thrombin. In this work, we study a bivalent, sequential-step binding scheme as an alternative to the high-affinity event and, in addition to the low-affinity one. We developed mathematical models for the single- and sequential-step schemes consisting of reaction-diffusion equations to compare to each other and to experimental data. We then used Bayesian inference, in the form of Markov chain Monte Carlo, to learn model parameter distributions from previously published experimental data. For the model to best fit the data, we made an additional assumption that thrombin was irreversibly sequestered; we hypothesized that this could be due to thrombin becoming physically trapped within fibrin fibers as they formed. We further estimated that ∼30% of thrombin in the experiments to which we compare our model output became physically trapped. The notion of physically trapped thrombin may provide new insights into conflicting observations regarding the speed of fibrinolysis. Finally, we show that our new model can be used to further probe scenarios dealing with thrombin allostery.

Mechanism of fibrinogen /microparticle complex deposition on solid substrates: Role of pH

Deposition kinetics of fibrinogen/polystyrene particle complexes on mica and the silicon/silica substrates was studied using the direct optical and atomic force microscopy. Initially, basic physicochemical characteristics of fibrinogen and the microparticles were acquired using the dynamic light scattering and the electrophoretic mobility methods, whereas the zeta potential of the substrates was determined using the streaming potential measurements. Subsequently an efficient method for the preparation of fibrinogen/polymer microparticle complexes characterized by controlled coverage and molecule orientation was developed. It was demonstrated that for a lower suspension concentration the complexes are stable for pH range 3-9 and for a large concentration for pH below 4.5 and above 5.5. This enabled to carry out thorough pH cycling experiments where their isoelectric point was determined to appear at pH 5. Kinetic measurements showed that the deposition rate of the complexes vanished at pH above 5, whereas the kinetics of the positively charged amidine particles, used as control, remained at maximum for pH up to 9. These results were theoretically interpreted using the hybrid random sequential adsorption model. It was confirmed that the deposition kinetics of the complexes can be adequately analyzed in terms of the mean-field approach, analogously to the ordinary colloid particle behavior. This is in contrast to the fibrinogen molecule behavior, which efficiently adsorb on negatively charged substrates for the entire range pHs up to 9.7. These results have practical significance for conducting efficient immunoassays governed by the specific antigen/antibody interactions.

Anticoagulant and Antithrombotic Properties in Vitro and in Vivo of a Novel Sulfated Polysaccharide from Marine Green Alga Monostroma nitidum

Sulfated polysaccharides from marine algae have high potential as promising candidates for marine drug development. In this study, a homogeneous sulfated polysaccharide from the marine green alga Monostroma nitidum, designated MS-1, was isolated using water extraction and anion-exchange and size-exclusion chromatography. Results of chemical and spectroscopic analyses showed that MS-1 mainly consisted of →3)-α-l-Rhap-(1→ and →2)-α-l-Rhap-(1→ residues, with additional branches consisting of 4-linked β-d-xylose, 4-/6-linked d-glucose, terminal β-d-glucuronic acid, and 3-/2-linked α-l-rhamnose. Sulfate ester groups substituted mainly at C-2/C-4 of →3)-α-l-Rhap-(1→ and C-4 of →2)-α-l-Rhap-(1→ residues, slightly at C-2 of terminal β-d-glucuronic residues. MS-1 exhibited strong anticoagulant activity in vitro and in vivo as evaluated by the activated partial thromboplastin time and thrombin time assays, and significantly decreased platelet aggregation. The anticoagulant activity mechanism of MS-1 was mainly attributed to strong potentiation thrombin by heparin cofactor-II, and it also hastened thrombin and coagulation factor Xa inhibitions by potentiating antithrombin-III. MS-1 possessed markedly thrombolytic activity evaluated by plasminogen activator inhibitior-1, fibrin degradation products, and D-dimer levels using rats plasma, and recanalization rate by FeCl₃-induced carotid artery thrombosis in mice. MS-1 exhibited strong antithrombotic activity in vitro and in vivo evaluated by the wet weighs and lengths of thrombus, and thrombus occlusion time by electrically-induced carotid artery thrombosis in rats. These results suggested that MS-1 could be a promising marine drug for prevention and therapy of thromboembolic disease.

Borrelia outer surface protein C is capable of human fibrinogen binding

Outer surface protein C (OspC) is one of the most abundant surface lipoproteins produced during early infection by the Borrelia spirochete, the causative agent of Lyme disease. The high sequence variability of the ospC gene results in the production of several and strongly divergent OspC types. One of the known roles of OspC is the recruitment of blood components, including complement regulators, to facilitate the bloodstream survival of Borrelia at an essential stage of host infection. Here, we identify and describe a new interaction between OspC and human fibrinogen. To test the ability of OspC to bind fibrinogen, we developed a microscale thermophoresis assay using four fluorescently labeled types of OspC. We show that OspC binds fibrinogen tightly, with nanomolar K_d , and that the binding depends on the OspC type. The binding assays combined with SAXS studies allowed us to map the OspC-binding site on the fibrinogen molecule. Spectrometric measurements of fibrinogen clotting in the presence of OspC indicate that OspC negatively influences the clot formation process. Taken together, our findings are consistent with the hypothesis that OspC interacts with blood protein partners to facilitate Borrelia spreading by the hematogenous route.

Revealing the principal attributes of protein adsorption on block copolymer surfaces with direct experimental evidence at the single protein level

Understanding protein adsorption onto polymer surfaces is of great importance in designing biomaterials, improving bioanalytical devices, and controlling biofouling, to name a few examples. Although steady research efforts have been advancing this field, our knowledge of this ubiquitous and complex phenomenon is still limited. In this study, we elucidate competitive protein adsorption behaviors sequentially occurring onto nanoscale block copolymer (BCP) surfaces via combined experimental and computer simulation approaches. The model systems chosen for our investigation are immunoglobulin G and fibrinogen introduced in different orders into the self-assembled nanodomains of poly(styrene)-block-poly(methylmethacrylate). We unambiguously reveal the adsorption, desorption, and replacement events of the same protein molecules via single protein tracking with atomic force microscopy. We then ascertain adsorption-related behaviors such as lateral mobility and self-association of proteins. We provide the much-needed, direct experimental proof of sequential adsorption events at the biomolecular level, which was virtually nonexistent before. We determine key protein adsorption pathways and dominant tendencies of sequential protein adsorption. We also reveal preadsorbed surface-associated behaviors in sequential adsorption, distinct from situations involving initially empty surfaces. We perform Monte-Carlo simulations to further substantiate our experimental outcomes. Our endeavors in this study may facilitate a well-guided mechanistic understanding of protein-polymer interactions by providing definite experimental evidence of competitive, sequential adsorption at the nanoscale. Increasingly, biomaterial and biomedical applications rely on systems of multicomponent proteins and chemically intricate, nanoscale polymer surfaces. Hence, our findings can also be beneficial for the development of next-generation nanobiomaterials and nanobiosensors exploiting self-assembled BCP nanodomain surfaces.

Confinement effect on the structure and elasticity of proteins interfacing polymers

The ordered nanostructured surfaces provide confined environments that allow functionalization of proteins. Here, we used the nanopores of poly(methyl methacrylate) films to attach fibrinogen and lysozyme, and discussed the changes in proteins' structures and elasticity upon confinement. Fourier-transform infrared spectroscopic analysis of protein secondary structures reveals that fibrinogen undergoes less structural change and behaves less stiff when the pore size is close to the protein size. Lysozyme, on the other hand, retains its native-like structure, however, it exhibits the highest modulus in 15 nm pores due to the lower macromolecular crowding effect the protein faces compared to lysozyme within larger pores. These findings manifest the effect of confinement and crowding on the conformation and elasticity of different shaped proteins tethered on surfaces.

Fibrin Formation, Structure and Properties

Fibrinogen and fibrin are essential for hemostasis and are major factors in thrombosis, wound healing, and several other biological functions and pathological conditions. The X-ray crystallographic structure of major parts of fibrin(ogen), together with computational reconstructions of missing portions and numerous biochemical and biophysical studies, have provided a wealth of data to interpret molecular mechanisms of fibrin formation, its organization, and properties. On cleavage of fibrinopeptides by thrombin, fibrinogen is converted to fibrin monomers, which interact via knobs exposed by fibrinopeptide removal in the central region, with holes always exposed at the ends of the molecules. The resulting half-staggered, double-stranded oligomers lengthen into protofibrils, which aggregate laterally to make fibers, which then branch to yield a three-dimensional network. Much is now known about the structural origins of clot mechanical properties, including changes in fiber orientation, stretching and buckling, and forced unfolding of molecular domains. Studies of congenital fibrinogen variants and post-translational modifications have increased our understanding of the structure and functions of fibrin(ogen). The fibrinolytic system, with the zymogen plasminogen binding to fibrin together with tissue-type plasminogen activator to promote activation to the active proteolytic enzyme, plasmin, results in digestion of fibrin at specific lysine residues. In spite of a great increase in our knowledge of all these interconnected processes, much about the molecular mechanisms of the biological functions of fibrin(ogen) remains unknown, including some basic aspects of clotting, fibrinolysis, and molecular origins of fibrin mechanical properties. Even less is known concerning more complex (patho)physiological implications of fibrinogen and fibrin.

Fibrinogen: a journey into biotechnology

Fibrinogen has been known since the mid-nineteenth century. Although initially its interest had been within the field of physiology over time its study has spread to new disciplines such as biochemistry, colloids and interfaces or biotechnology. First, we will describe the bulk properties of the molecule as well as its supramolecular assembly with different ligands by using different techniques and theoretical models. In the next step we will analyze the interfacial properties, an important topic because fibrinogen is considered to be a major inhibitor of lung surfactants' function at the lining layer of alveoli. The final step will be devoted to its main application in biotechnology. Thus, the adsorption of fibrinogen at solid/electrolyte interfaces and at carrier particles will be discussed. The reversibility of adsorption, fibrinogen molecule orientation, and maximum coverage will be thoroughly discussed. The stability of fibrinogen monolayers formed at these surfaces with respect to pH and ionic strength cyclic changes will also be presented. Based on the physicochemical data, adsorption kinetics and colloid particle deposition measurements, probable adsorption mechanisms of fibrinogen on solid/electrolyte interfaces will be defined.

Surface Assembly Configurations and Packing Preferences of Fibrinogen Mediated by the Periodicity and Alignment Control of Block Copolymer Nanodomains

The ability to control the specific adsorption and packing behaviors of biomedically important proteins by effectively guiding their preferred surface adsorption configuration and packing orientation on polymeric surfaces may have utility in many applications such as biomaterials, medical implants, and tissue engineering. Herein, we investigate the distinct adhesion configurations of fibrinogen (Fg) proteins and the different organization behaviors between single Fg molecules that are mediated by the changes in the periodicity and alignment of chemically alternating nanodomains in thin films of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) block copolymer (BCP). Specifically, the adsorption characteristics of individual Fg molecules were unambiguously resolved on four different PS-b-PMMA templates of dsa PS-b-PMMA, sm PS-b-PMMA, com PS-b-PMMA, and PS-r-PMMA. By direct visualization through high resolution imaging, the distinct adsorption and packing configurations of both isolated and interacting Fg molecules were determined as a function of the BCP template-specific nanodomain periodicity, domain alignment (random versus fully aligned), and protein concentration. The three dominant Fg adsorption configurations, SP∥, SP⊥, and TP, were observed and their occurrence ratios were ascertained on each PS-b-PMMA template. During surface packing, the orientation of the protein backbone was largely governed by the periodicity and alignment of the underlying PS-b-PMMA nanodomains whose specific direction was explicitly resolved relative to the polymeric nanodomain axis. The use of PS-b-PMMA with a periodicity much smaller than (and comparable to) the length of Fg led to a Fg scaffold with the protein backbone aligned parallel (and perpendicular) to the nanodomain major axis. In addition, we have successfully created fully Fg-decorated BCP constructs analogous to two-dimensional Fg crystals in which aligned protein molecules are arranged either side-on or end-on, depending on the BCP template. Our results demonstrate that the geometry and orientation of the protein can be effectively guided during Fg self-assembly by controlling the physical dimensions and orientations of the underlying BCP templates. Finally, the biofunctionality of the BCP surface-bound Fg was assessed and the Fg/BCP construct was successfully used in the Ca-P nanoparticle nucleation/growth and microglia cell activation.

Structural properties of fracture haematoma: current status and future clinical implications

Blood clots (haematomas) that form immediately following a bone fracture have been shown to be vital for the subsequent healing process. During the clotting process, a number of factors can influence the fibrin clot structure, such as fibrin polymerization, growth factor binding, cellular infiltration (including platelet retraction), protein concentrations and cytokines. The modulation of the fibrin clot structure within the fracture site has important clinical implications and could result in the development of multifunctional scaffolds that mimic the natural structure of a haematoma. Artificial haematoma structures such as these can be created from the patient's own blood and can therefore act as an ideal bone defect filling material for potential clinical application to accelerate bone regeneration. Copyright © 2016 John Wiley & Sons, Ltd.

Fibrinogen adsorption mechanisms at the gold substrate revealed by QCM-D measurements and RSA modeling

Adsorption kinetics of fibrinogen at a gold substrate at various pHs was thoroughly studied using the QCM-D method. The experimental were interpreted in terms of theoretical calculations performed according to the random sequential adsorption model (RSA). In this way, the hydration functions and water factors of fibrinogen monolayers were quantitatively evaluated at various pHs. It was revealed that for the lower range of fibrinogen coverage the hydration function were considerably lower than previously obtained for the silica sensor [33]. The lower hydration of fibrinogen monolayers on the gold sensor was attributed to its higher roughness. However, for higher fibrinogen coverage the hydration functions for both sensors became identical exhibiting an universal behavior. By using the hydration functions, the fibrinogen adsorption/desorption runs derived from QCM-D measurements were converted to the Γd vs. the time relationships. This allowed to precisely determine the maximum coverage that varied between 1.6mgm(-2) at pH 3.5 and 4.5mgm(-2) at pH 7.4 (for ionic strength of 0.15M). These results agree with theoretical eRSA modeling and previous experimental data derived by using ellipsometry, OWLS and TIRF. Various fibrinogen adsorption mechanisms were revealed by exploiting the maximum coverage data. These results allow one to develop a method for preparing fibrinogen monolayers of well-controlled coverage and molecule orientation.

Identification of biomarkers for endometriosis using clinical proteomics

Background:

We investigated possible biomarkers for endometriosis (EM) using the ClinProt technique and proteomics methods.

Methods:

We enrolled 50 patients with EM, 34 with benign ovarian neoplasms and 40 healthy volunteers in this study. Serum proteomic spectra were generated by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MS) combined with weak cationic exchange (WCX) magnetic beads. Possible biomarkers were analyzed by a random and repeat pattern model-validation method that we designed, and ClinProtools software, results were refined using online liquid chromatography-tandem MS.

Results:

We found a cluster of 5 peptides (4210, 5264, 2660, 5635, and 5904 Da), using 3 peptides (4210, 5904, 2660 Da) to discriminate EM patients from healthy volunteers, with 96.67% sensitivity and 100% specificity. We selected 4210 and 5904 m/z, which differed most between patients with EM and controls, and identified them as fragments of ATP1B4, and the fibrinogen alpha (FGA) isoform 1/2 of the FGA chain precursor, respectively.

Conclusions:

ClinProt can identify EM biomarkers, which – most notably – distinguish even early-stage or minimal disease. We found 5 stable peaks at 4210, 5264, 2660, 5635, and 5904 Da as potential EM biomarkers, the strongest of which were associated with ATP1B4 (4210 Da) and FGA (5904 Da); this indicates that ATP1B4 and FGA are associated with EM pathogenesis.

Revealing fibrinogen monolayer conformations at different pHs: electrokinetic and colloid deposition studies

Adsorption mechanism of human fibrinogen on mica at different pHs is studied using the streaming potential and colloid deposition measurements. The fibrinogen monolayers are produced by a controlled adsorption under diffusion transport at pH of 3.5 and 7.4. Initially, the electrokinetic properties of these monolayers and their stability for various ionic strength are determined. It is shown that at pH 3.5 fibrinogen adsorbs irreversibly on mica for ionic strength range of 4×10(-4) to 0.15 M. At pH 7.4, a partial desorption is observed for ionic strength below 10(-2) M. This is attributed to the desorption of the end-on oriented molecules whereas the side-on adsorbed molecules remain irreversibly bound at all ionic strengths. The orientation of molecules and monolayer structure is evaluated by the colloid deposition measurements involving negatively charged polystyrene latex microspheres, 820 nm in diameter. An anomalous deposition of negative latex particles on substrates exhibiting a negative zeta potential is observed. At pH 3.5 measurable deposition of latex is observed even at low ionic strength where the approach distance of latex particles exceeded 70 nm. At pH 7.4 this critical distance is 23 nm. This confirms that fibrinogen monolayers formed at both pHs are characterized by the presence of the side-on and end-on oriented molecules that prevail at higher coverage range. It is also shown that positive charge is located at the end parts of the αA chains of the adsorbed fibrinogen molecules. Therefore, it is concluded that the colloid deposition method is an efficient tool for revealing protein adsorption mechanisms at solid/electrolyte interfaces.

Visualization of fibrinogen αC regions and their arrangement during fibrin network formation by high-resolution AFM

BACKGROUND

Fibrinogen has been intensively studied with transmission electron microscopy and x-ray diffraction. But until now, a complete 3D structure of the molecule has not yet been available because the two highly flexible αC regions could not be resolved in fibrinogen crystals. This study was aimed at determining whether the αC regions can be visualized by high-resolution atomic force microscopy.

METHODS

Atomic force microscopy with super high resolution was used to image single molecules of fibrinogen and fibrin associates. The key approach was to use a graphite surface modified with the monolayer of amphiphilic carbohydrate-glycine molecules and unique supersharp cantilevers with 1 nm tip diameter.

RESULTS

Fibrinogen αC regions were visualized along with the complete domain structure of the protein. In almost all molecules at pH 7.4 the D domain regions had one or two protrusions of average height 0.4 ± 0.1 nm and length 21 ± 6 nm. The complex, formed between thrombin and fibrinogen, was also visualized. Images of growing fibrin fibers with clearly visible αC regions have been obtained.

CONCLUSIONS

Fibrin αC regions were visible in protofibrils and large fibers; αC regions intertwined near a branchpoint and looked like a zipper. These results support the idea that αC regions are involved in the thickening of fibrin fibers. In addition, new details were revealed about the behavior of individual fibrin molecules during formation of the fibrin network. Under the diluted condition, the positioning of the αC regions could suggest their involvement in long-range interactions between fibrin but not fibrinogen molecules.

Human fibrinogen adsorption on positively charged latex particles

Fibrinogen (Fb) adsorption on positively charged latex particles (average diameter of 800 nm) was studied using the microelectrophoretic and the concentration depletion methods based on AFM imaging. Monolayers on latex were adsorbed from diluted bulk solutions at pH 7.4 and an ionic strength in the range of 10(-3) to 0.15 M where fibrinogen molecules exhibited an average negative charge. The electrophoretic mobility of the latex after controlled fibrinogen adsorption was systematically measured. A monotonic decrease in the electrophoretic mobility of fibrinogen-covered latex was observed for all ionic strengths. The results of these experiments were interpreted according to the three-dimensional electrokinetic model. It was also determined using the concentration depletion method that fibrinogen adsorption was irreversible and the maximum coverage was equal to 0.6 mg m(-2) for ionic strength 10(-3) M and 1.3 mg m(-2) for ionic strength 0.15 M. The increase of the maximum coverage was confirmed by theoretical modeling based on the random sequential adsorption approach. Paradoxically, the maximum coverage of fibrinogen on positively charged latex particles was more than two times lower than the maximum coverage obtained for negative latex particles (3.2 mg m(-2)) at pH 7.4 and ionic strength of 0.15 M. This was interpreted as a result of the side-on adsorption of fibrinogen molecules with their negatively charged core attached to the positively charged latex surface. The stability and acid base properties of fibrinogen monolayers on latex were also determined in pH cycling experiments where it was observed that there were no irreversible conformational changes in the fibrinogen monolayers. Additionally, the zeta potential of monolayers was more positive than the zeta potential of fibrinogen in the bulk, which proves a heterogeneous charge distribution. These experimental data reveal a new, side-on adsorption mechanism of fibrinogen on positively charged surfaces and confirmed the decisive role of electrostatic interactions in this process.

Distinct adsorption configurations and self-assembly characteristics of fibrinogen on chemically uniform and alternating surfaces including block copolymer nanodomains

Understanding protein-surface interactions is crucial to solid-state biomedical applications whose functionality is directly correlated with the precise control of the adsorption configuration, surface packing, loading density, and bioactivity of protein molecules. Because of the small dimensions and highly amphiphilic nature of proteins, investigation of protein adsorption performed on nanoscale topology can shed light on subprotein-level interaction preferences. In this study, we examine the adsorption and assembly behavior of a highly elongated protein, fibrinogen, on both chemically uniform (as-is and buffered HF-treated SiO2/Si, and homopolymers of polystyrene and poly(methyl methacrylate)) and varying (polystyrene-block-poly(methyl methacrylate)) surfaces. By focusing on high-resolution imaging of individual protein molecules whose configurations are influenced by protein-surface rather than protein-protein interactions, fibrinogen conformations characteristic to each surface are identified and statistically analyzed for structural similarities/differences in key protein domains. By exploiting block copolymer nanodomains whose repeat distance is commensurate with the length of the individual protein, we determine that fibrinogen exhibits a more neutral tendency for interaction with both polystyrene and poly(methyl methacrylate) blocks relative to the case of common globular proteins. Factors affecting fibrinogen-polymer interactions are discussed in terms of hydrophobic and electrostatic interactions. In addition, assembly and packing attributes of fibrinogen are determined at different loading conditions. Primary orientations of fibrinogen and its rearrangements with respect to the underlying diblock nanodomains associated with different surface coverage are explained by pertinent protein interaction mechanisms. On the basis of two-dimensional stacking behavior, a protein assembly model is proposed for the formation of an extended fibrinogen network on the diblock copolymer.

Novel thrombolytic protease from edible and medicinal plant Aster yomena (Kitam.) Honda with anticoagulant activity: purification and partial characterization

A thrombolytic protease named kitamase possessing anticoagulant property was purified from edible and medicinal plant Aster yomena (Kitam.) Honda. Kitamase showed a molecular weight of 50 kDa by SDS-PAGE and displayed a strong fibrin zymogram lysis band corresponding to the similar molecular mass. The enzyme was active at high temperatures (50°C). The fibrinolytic activity of kitamase was strongly inhibited by EDTA, EGTA, TPCK and PMSF, inhibited by Zn(2+). The Km and Vmax values for substrate S-2251 were determined as 4.31 mM and 23.81 mM/mg respectively. It dissolved fibrin clot directly and specifically cleaved the α, Aα and γ-γ chains of fibrin and fibrinogen. In addition, kitamase delayed the coagulation time and increased activated partial thromboplastin time and prothrombin time. Kitamase exerted a significant protective effect against collagen and epinephrine induced pulmonary thromboembolism in mice. These results suggest that kitamase may have the property of metallo-protease like enzyme, novel fibrino(geno)lytic enzyme and a potential to be a therapeutic agent for thrombosis.

Fibrinogen monolayer characterization by colloid deposition

Colloid particle deposition was applied to characterize bovine and human fibrinogen (Fb) monolayers on mica produced by controlled adsorption under diffusion transport at pH 3.5. The surface concentration of Fb was determined by AFM enumeration of single molecules adsorbed over the substrate surface. The electrokinetic properties of Fb monolayers for various ionic strength were studied using the in situ streaming potential measurements. It was shown that Fb adsorbs irreversibly on mica for a broad range of ionic strength of 4 × 10(-4) to 0.15 M, NaCl. The overcharging of initially negative mica surface occurred for fibrinogen surface concentrations higher than 1400 μm(-2). The orientation of fibrinogen molecules in the monolayers was evaluated by the colloid deposition method involving negatively charged polystyrene latex microspheres, 820 nm in diameter. An anomalous deposition of negative latex particles on substrates exhibiting a negative zeta potential was observed, which contradicts the mean-field DLVO predictions. Measurable deposition was observed even at low ionic strength where the minimum approach distance of latex particles to the interface exceeds 70 nm (for 6 × 10(-4) M NaCl). This confirms that, at this pH, fibrinogen molecules adsorb end-on on mica assuming extended conformations with the positive charge located mostly in the end part of the αA chains. This agrees with previous experimental and theoretical results discussed in the literature (Santore, M. M.; Wertz Ch. F. Protein spreading kinetics at liquid-solid interfaces via an adsorption probe method. Langmuir 2005, 21, 10172-10178 (experimental); Adamczyk, Z.; Barbasz, J.; Cieśla, M.; Mechanisms of fibrinogen adsorption at solid substrates. Langmuir, 2011, 25, 6868-6878 (theoretical)). This unusual latex deposition on Fb monolayers was quantitatively interpreted in terms of the model developed in ref 55 (Jin, X.; Wang, N. H. L.; Tarjus, G.; Talbot, J. Irreversible adsorption on nonuniform surfaces: the random site model. J. Phys. Chem. 1993, 97, 4256-4258). It was concluded that the colloid deposition method is an efficient tool for revealing protein adsorption mechanisms at solid/electrolyte interfaces.

Mechanisms of fibrinogen adsorption at solid substrates at lower pH

Adsorption of fibrinogen was theoretically studied using the three-dimensional random sequential adsorption (RSA) model. Fibrinogen molecule shape was approximated by the bead model considering the presence of flexible side arms. Various cases were considered inter alia, the side-on adsorption mechanisms and the simultaneous side-on/end-on adsorption mechanism. The latter mechanisms is pertinent to fibrinogen adsorption at lower pH (below isoelectric point of 5.8) where the entire molecule is positively charged. Extensive calculations enabled one to determine the jamming surface concentration (coverage) of molecules adsorbed under the side-on and end-on orientations as well as the total coverage. For the simultaneous side-on/end-on model the maximum surface concentration was 7.29 × 10(3) μm(-2) corresponding to the protein coverage of 4.12 mg m(-2) (without considering hydration). Additionally, the surface blocking functions for different adsorption regimes were determined and analytically approximated for the entire range of coverage by the interpolating polynomials. Using these blocking functions, fibrinogen adsorption kinetics for diffusion controlled transport conditions was evaluated. Comparison of these theoretical results with experimental data was made. It was demonstrated that the simultaneous side-on/end-on model properly reflects the maximum coverage of fibrinogen adsorbed on latex particles determined via the electrokinetic (electrophoretic mobility) and AFM measurements. Also, streaming potential measurements of fibrinogen adsorption kinetics on mica were successfully interpreted in terms of this model. The theoretical results derived in this work have implications for basic science providing information on mechanisms of anisotropic protein adsorption.

Hydrodynamic characterization of recombinant human fibrinogen species

INTRODUCTION

Fibrinogen is a key component of the blood coagulation system and plays important, diverse roles in several relevant pathologies such as thrombosis, hemorrhage, and cancer. It is a large glycoprotein whose three-dimensional molecular structure is not fully known. Furthermore, circulating fibrinogen is highly heterogeneous, mainly due to proteolytic degradation and alternative mRNA processing. Recombinant production of human fibrinogen allows investigating the impact on the three-dimensional structure of specific changes in the primary structure.

METHODS

We performed analytical ultracentrifugation analyses of a full-length recombinant human fibrinogen, its counterpart purified from human plasma, and a recombinant human fibrinogen with both Aα chains truncated at amino acid 251, thus missing their last 359 amino acid residues.

RESULTS

We have accurately determined the translational diffusion and sedimentation coefficients (Dt(20,w)(0), s(20,w)(0)) of all three species. This was confirmed by derived molecular weights within 1% for the full length species, and 5% for the truncated species, as assessed by comparison with SDS-PAGE/Western blot analyses and primary structure data. No significant differences in the values of Dt(20,w)(0) and s(20,w)(0) were found between the recombinant and purified full length human fibrinogens, while slightly lower and higher values, respectively, resulted for the recombinant truncated human fibrinogen compared to a previously characterized purified human fibrinogen fragment X obtained by plasmin digestion.

CONCLUSIONS

Full-length recombinant fibrinogen is less polydisperse but hydrodynamically indistinguishable from its counterpart purified from human plasma. Recombinant Aα251-truncated human fibrinogen instead behaves differently from fragment X, suggesting a role for the Bβ residues 1-52 in inter-molecular interactions. Overall, these new hydrodynamic data will constitute a reliable benchmark against which models of fibrinogen species could be compared.

Atomic force microscopy: a multifaceted tool to study membrane proteins and their interactions with ligands

Membrane proteins are embedded in lipid bilayers and facilitate the communication between the external environment and the interior of the cell. This communication is often mediated by the binding of ligands to the membrane protein. Understanding the nature of the interaction between a ligand and a membrane protein is required to both understand the mechanism of action of these proteins and for the development of novel pharmacological drugs. The highly hydrophobic nature of membrane proteins and the requirement of a lipid bilayer for native function have hampered the structural and molecular characterizations of these proteins under physiologically relevant conditions. Atomic force microscopy offers a solution to studying membrane proteins and their interactions with ligands under physiologically relevant conditions and can provide novel insights about the nature of these critical molecular interactions that facilitate cellular communication. In this review, we provide an overview of the atomic force microscopy technique and discuss its application in the study of a variety of questions related to the interaction between a membrane protein and a ligand. This article is part of a Special Issue entitled: Structural and biophysical characterization of membrane protein-ligand binding.

Thrombolytic, anticoagulant and antiplatelet activities of codiase, a bi-functional fibrinolytic enzyme from Codium fragile

Thrombosis is a leading cause of morbidity and mortality throughout the world. Thrombolytic agents are important for both the prevention and treatment of thrombosis. In this study, codiase, a new bi-functional fibrinolytic serine protease having thrombolytic, anticoagulant, and antiplatelet activities was purified from marine green alga, Codium fragile. The molecular weight of the enzyme was estimated to be 48.9 kDa by SDS-PAGE, and mass spectrometry. Fibrin zymography analysis showed an active band with similar molecular weight. The N-terminal sequence was found to be APKASTDQTLPL, which is different from that of other known fibrinolytic enzymes. Codiase displayed maximum activity at 30 °C and pH 6.0, and the activity was inhibited by Zn(2+) and Fe(2+). Moreover, the enzyme activity was strongly inhibited by serine protease inhibitor such as PMSF. Codiase exhibited high specificity for the substrate S-2288, and the Km and Vmax values for this substrate were found to be 0.24 mM and 79 U/ml respectively. Fibrin plate assays revealed that it was able to hydrolyze fibrin clot either directly or by activation of plasminogen. Codiase effectively hydrolyzed fibrin and fibrinogen, preferentially degrading α- and Aα chains, followed by γ-γ, and γ-chains. However, it provoked slower degradation of Bβ and β-chains. The structural change of fibrin clot and fibrinogen by codiase was also detected by FTIR-ATR spectroscopy analysis. In vitro and in vivo studies revealed that codiase reduces thrombosis in concentration-dependent manner. Codiase was found to prolong activated partial thromboplastin time (APTT), and prothrombin time (PT). PFA-100 studies showed that codiase prolonged the closure time (CT) of citrated whole human blood. These favorable antithrombotic profiles together with its anticoagulant and platelet disaggregation properties, and lack of toxicity to mice and NIH-3T3 cells, make it a potential agent for thrombolytic therapy.