Neutron reflection study of bovine beta-casein adsorbed on OTS self-assembled monolayers

Investigating the Orientation of an Interfacially Adsorbed Monoclonal Antibody and Its Fragments Using Neutron Reflection

Interfacial adsorption is a molecular process occurring during the production, purification, transport, and storage of antibodies, with a direct impact on their structural stability and subsequent implications on their bioactivities. While the average conformational orientation of an adsorbed protein can be readily determined, its associated structures are more complex to characterize. Neutron reflection has been used in this work to investigate the conformational orientations of the monoclonal antibody COE-3 and its Fab and Fc fragments at the oil/water and air/water interfaces. Rigid body rotation modeling was found to be suitable for globular and relatively rigid proteins such as the Fab and Fc fragments but less so for relatively flexible proteins such as full COE-3. Fab and Fc fragments adopted a 'flat-on' orientation at the air/water interface, minimizing the thickness of the protein layer, but they adopted a substantially tilted orientation at the oil/water interface with increased layer thickness. In contrast, COE-3 was found to adsorb in tilted orientations at both interfaces, with one fragment protruding into the solution. This work demonstrates that rigid-body modeling can provide additional insights into protein layers at various interfaces relevant to bioprocess engineering.

The Assembly Mechanism and Mesoscale Architecture of Protein-Polysaccharide Complexes Formed at the Solid-liquid Interface

Protein-polysaccharide composite materials have generated much interest due to their potential use in medical science and biotechnology. A comprehensive understanding of the assembly mechanism and the mesoscale architecture is needed for fabricating protein-polysaccharide composite materials with desired properties. In this study, complex assemblies were built on silica surfaces through a layer-by-layer (LbL) approach using bovine beta-lactoglobulin variant A (βLgA) and pectin as model protein and polysaccharide, respectively. We demonstrated the combined use of quartz crystal microbalance with dissipation monitoring (QCM-D) and neutron reflectometry (NR) for elucidating the assembly mechanism as well as the internal architecture of the protein-polysaccharide complexes formed at the solid-liquid interface. Our results show that βLgA and pectin interacted with each other and formed a cohesive matrix structure at the interface consisting of intertwined pectin chains that were cross-linked by βLgA-rich domains. Although the complexes were fabricated in an LbL fashion, the complexes appeared to be relatively homogeneous with βLgA and pectin molecules spatially distributed within the matrix structure. Our results also demonstrate that the density of βLgA-pectin complex assemblies increased with both the overall and local charge density of pectin molecules. Therefore, the physical properties of the protein-polysaccharide matrix structure, including density and level of hydration, can be tuned by using polysaccharides with varying charge patterns, thus promoting the development of composite materials with desired properties.

Adsorption of soft NIPAM nanogels at hydrophobic and hydrophilic interfaces: Conformation of the interfacial layers determined by neutron reflectivity

The application of stimuli-responsive microgels and nanogels in drug delivery, catalysis, sensing, and coatings is restricted currently by the limited understanding of the factors influencing their adsorption dynamics and structural changes at interfaces. We have used neutron reflectivity to resolve, on the Ångström scale, the structure of 5% crosslinked N-isopropylacrylamide nanogels at both hydrophobic and hydrophilic interfaces in situ, as a function of temperature and bulk nanogel concentration. Our results show that the higher flexibility given by the low crosslinker content allows for a more ordered structure and packing. The adsorption of the thermoresponsive nanogels is primarily driven by temperature, more specifically its proximity to its volume phase transition temperature, while concentration plays a secondary role. Hydrophobic interactions drive the conformation of the first layer at the interface, which plays a key role in influencing the overall nanogel structure. The mobility of the first layer at the air-water interface as opposed to the interfacial confinement at the solid (SiC8)-liquid interface, results in a different conformation, a more compact and less deformed packing structure, which ultimately drives the structure of the subsequent layers. The evidence for the different structural conformations determined by the degree of hydrophobicity of the interface provides new knowledge, which is essential for the development of further applications. The key role of hydrophobic interactions in driving adsorption and interfacial behavior was also confirmed by fluid AFM experiments which visualized adherence of the nanogels to SiC8 modified surfaces.

Application of Multiharmonic QCM-D for Detection of Plasmin at Hydrophobic Surfaces Modified by β-Casein

Plasmin protease plays an important role in many processes in living systems, including milk. Monitoring plasmin activity is important for control of the nutritional quality of milk and other dairy products. We designed a biosensor to detect the proteolytic activity of plasmin, using multiharmonic quartz crystal microbalance with dissipation (QCM-D). The β-casein immobilized on the hydrophobic surface of 1-dodecanethiol on the AT-cut quartz crystal was used to monitor plasmin activity. We demonstrated detection of plasmin in a concentration range of 0.1–20 nM, with the limit of detection about 0.13 ± 0.01 nM. The analysis of viscoelastic properties of the β-casein layer showed rapid changes of shear elasticity modulus, μ, and coefficient of viscosity, η, at plasmin sub-nanomolar concentrations, followed by modest changes at nanomolar concentrations, indicating multilayer architecture β-casein. A comparative analysis of viscoelastic properties of β-casein layers following plasmin and trypsin cleavage showed that the higher effect of trypsin was due to larger potential cleavage sites of β-casein.

Analysis of trypsin activity at β-casein layers formed on hydrophobic surfaces using a multiharmonic acoustic method

Proteolysis of milk proteins, such as caseins, caused by milk proteases, can change the organoleptic and nutritional characteristics of milk, and therefore it is essential to monitor this enzymatic activity. We used trypsin as a model protease because of its role as a biomarker for pancreatitis. The aim of this work was to demonstrate the detection of proteolysis of β-casein by trypsin using a multiharmonic quartz crystal microbalance (QCM) biosensor. The β-casein layer was deposited from a 0.1 mg mL^-1 solution on a hydrophobic surface consisting of a self-assembled monolayer of 1-dodecanethiol on the gold electrode of the QCM. The addition of an increasing concentration of trypsin leads to the removal of the casein layer due to proteolysis, and correlates with an increase in the resonant frequency of the QCM. We investigated the effect of trypsin concentrations (0.3-20 nM) on the kinetics of the proteolysis of β-casein and demonstrated that the frequency increase is proportional to the protease concentration. Consequently, an inverse Michaelis-Menten model was used to estimate the Michaelis-Menten constant (K_M = 0.38 ± 0.02 nM) and the limit of detection (LOD = 0.16 ± 0.02 nM). The thickness, mass and viscoelastic properties of the protein adlayer after its formation and following the proteolytic cleavage were evaluated by means of multi-harmonic analysis. We found that β-casein is preferably adsorbed on the hydrophobic surfaces as an asymmetrical double layer, of which the innermost layer was found to be denser and thinner (about 2.37 nm) and the outermost layer was found to be less tightly bound and thicker (about 3.5 nm).

Investigating the Conformation of Surface-Adsorbed Proteins with Standing-Wave X-ray Fluorescence

Protein adsorption to surfaces is at the heart of numerous technological and bioanalytical applications, but sometimes, it is also associated with medical risks. To deepen our insights into processes involving layers of surface-adsorbed proteins, high-resolution structural information is essential. Here, we use standing-wave X-ray fluorescence (SWXF) in combination with an optimized liquid-cell setup to investigate the underwater conformation of the random-coiled phosphoprotein β-casein adsorbed to hydrophilic and hydrophobized solid surfaces. The orientation of the protein, as determined through the distributions of sulfur and phosphorus, is found to be sensitive to the chemical nature of the substrate. While no preferred orientations are observed on hydrophobized surfaces, on hydrophilic Al oxide, β-casein is adsorbed as a diblock copolymer with the phosphorylated domain I attached to the surface. Our results demonstrate that targeting biologically relevant chemical elements with SWXF enables a detailed investigation of biomolecular layers under near-physiological conditions.

anaklasis: a compact software package for model-based analysis of specular neutron and X-ray reflectometry data sets

A new software package (anaklasis) for model-based analysis of specular neutron and X-ray reflectivity is introduced. Key features include a user-friendly compact interfacial model definition scheme and a complete set of methods for co-refining data and estimating parameter uncertainty.

anaklasis constitutes a set of open-source Python scripts that facilitate a range of specular neutron and X-ray reflectivity calculations, involving the generation of theoretical curves and the comparison/fitting of interfacial model reflectivity against experimental data sets. The primary focus of the software is twofold: on one hand to offer a more natural framework for model definition, requiring minimum coding literacy, and on the other hand to include advanced analysis methods that have been proposed in recent work. Particular attention is given to the ability to co-refine reflectivity data and to the estimation of model-parameter uncertainty and covariance using bootstrap analysis and Markov chain Monte Carlo sampling. The compactness and simplicity of model definition together with the streamlined analysis do not present a steep learning curve for the user, an aspect that may accelerate the generation of reproducible, easily readable and statistically accurate reports in future neutron and X-ray reflectivity related literature.

Silane-based self-assembled monolayer deposited on fluorine doped tin oxide as model system for pharmaceutical and biomedical analysis

Recently, self-assembled monolayers (SAMs) are gaining a lot of interest due to their simplicity of preparation and wide applicability in the development of model systems used in pharmaceutical and biomedical analysis. The most efficient methods used for the investigation of SAM-based structures usually include cyclic voltammetry and electrochemical impedance spectroscopy. Scanning electrochemical microscopy (SECM) could be also used as an alternative method for SAM investigations, because this method enables to map modified surface. In this work, the surface of fluorine doped tin oxide (FTO) was modified with octadeciltrichlorosilane (OTS) based SAM and investigated using SECM. Measurements, which were carried out by SECM, lead to conclusion that highly heterogeneous and distributed monolayer has been formed on FTO surface.

Reflectometry Reveals Accumulation of Surfactant Impurities at Bare Oil/Water Interfaces

Bare interfaces between water and hydrophobic media like air or oil are of fundamental scientific interest and of great relevance for numerous applications. A number of observations involving water/hydrophobic interfaces have, however, eluded a consensus mechanistic interpretation so far. Recent theoretical studies ascribe these phenomena to an interfacial accumulation of charged surfactant impurities in water. In the present work, we show that identifying surfactant accumulation with X-ray reflectometry (XRR) or neutron reflectometry (NR) is challenging under conventional contrast configurations because interfacial surfactant layers are then hardly visible. On the other hand, both XRR and NR become more sensitive to surfactant accumulation when a suitable scattering length contrast is generated by using fluorinated oil. With this approach, significant interfacial accumulation of surfactant impurities at the bare oil/water interface is observed in experiments involving standard cleaning procedures. These results suggest that surfactant impurities may be a limiting factor for the investigation of fundamental phenomena involving water/hydrophobic interfaces.

Model-independent recovery of interfacial structure from multi-contrast neutron reflectivity data

An indirect Fourier transform/simulated annealing method exploits the information content of multiple solvent contrast neutron reflectivity data and permits the model-independent recovery of interfacial structure at the air/liquid and solid/liquid interface.

Neutron specular reflectivity at soft interfaces provides sub-nanometre information concerning the molecular distribution of thin films, while the application of contrast variation can highlight the scattering from different parts of the system and lead to an overall reduction in fitting ambiguity. Traditional modelling approaches involve the construction of a trial scattering length density profile based on initial speculation and the subsequent refinement of its parameters through minimization of the discrepancy between the calculated and measured reflectivity. In practice this might produce an artificial bias towards specific sets of solutions. On the other hand, direct inversion of reflectivity data, despite its ability to provide a unique solution, is subject to limitations and experimental complications. Presented here is an integrated indirect Fourier transform/simulated annealing method that, when applied to multiple solvent contrast reflectivity data and within the limits of finite spatial resolution, leads to reliable reconstructions of the interfacial structure without the need for any a priori assumptions. The generality of the method permits its straightforward application in common experimental contrast-variation investigations at the solid/liquid and air/liquid interface.

Neutron visualization of inhomogeneous buried interfaces in thin films

When designing some functions in thin film systems, one of the key concepts is the structure of the constituent layers and interfaces. In an actual system, the layers and interfaces are often inhomogeneous in different scales, from hundreds of microns to several nanometers, causing differences in properties, despite very similar average structures. In this case, the choice of the observation point is critical to clarify the problem. Another critical aspect is the identification of these points by surveying the entire inhomogeneous thin film system. This article presents a description of a novel promising solution that is suitable for nondestructive visualization of inhomogeneous buried layers and interfaces in thin films. Such observations have been impossible until now. In this investigation, a unique extension of neutron reflectometry is proposed. While conventional neutron reflectivity just gives average depth-profiling of the scattering length density of layered thin films, the present method provides full picture of the inhomogeneity. In general, achieving a high spatial-resolving power for neutron scattering is not straightforward because the neutron counts become fairly limited at the sample or the detector position when the beam size is reduced. As a result, XY scanning of a sample with a small neutron beam is fairly difficult because of the required long measurement time. To address these issues, new concepts have been introduced for neutron reflectivity. The proposed method uses a wide beam instead of reducing the beam size. In addition, it measures the projection reflection profile instead of the total integrated intensity. These profiles are collected at a set of different in-plane angles. Similar to computed tomography, it is possible to obtain the specimen's two-dimensional (2D) neutron reflectivity distribution as one image. Because the spatial resolution is limited by the detection method, a Hadamard coded mask is employed to measure the reflection projection with only 50% loss of the primary neutron intensity. When the time-of-flight (ToF) mode is used for the neutron experiment, one can obtain many images as a function of ToF, i.e., the wavevector transfer. Such series of images can be displayed as a video. This indicates that the neutron reflectivity profiles of local points can be retrieved from the above video images. This paper presents the first report on the development of neutron reflectivity with imaging capability, and the analysis of local points in inhomogeneous layered thin-films without utilizing a small neutron beam. In the present work, the feasibility of the proposed method with approximately 1 mm spatial resolution was examined. In addition, further improvements of the approach are discussed. It is anticipated that this technique will facilitate new opportunities in the study of buried function interfaces.

Neutron Reflectometry Elucidates Protein Adsorption from Human Blood Serum onto PEG Brushes

Poly(ethylene glycol) (PEG) brushes are reputed for their ability to prevent undesired protein adsorption to material surfaces exposed to biological fluids. Here, protein adsorption out of human blood serum onto PEG brushes anchored to solid-supported lipid monolayers was characterized by neutron reflectometry, yielding volume fraction profiles of lipid headgroups, PEG, and adsorbed proteins at subnanometer resolution. For both PEGylated and non-PEGylated lipid surfaces, serum proteins adsorb as a thin layer of approximately 10 Å, overlapping with the headgroup region. This layer corresponds to primary adsorption at the grafting surface and resists rinsing. A second diffuse protein layer overlaps with the periphery of the PEG brush and is attributed to ternary adsorption due to protein-PEG attraction. This second layer disappears upon rinsing, thus providing a first observation of the structural effect of rinsing on protein adsorption to PEG brushes.

Nano-in-Nano Approach for Enzyme Immobilization Based on Block Copolymers

We set up a facile approach for fabrication of supports with tailored nanoporosity for immobilization of enzymes. To this aim block copolymers (BCPs) self-assembly has been used to prepare nanostructured thin films with well-defined architecture containing pores of tailorable size delimited by walls with tailorable degree of hydrophilicity. In particular, we employed a mixture of polystyrene-block-poly(l-lactide) (PS-PLLA) and polystyrene-block-poly(ethylene oxide) (PS-PEO) diblock copolymers to generate thin films with a lamellar morphology consisting of PS lamellar domains alternating with mixed PEO/PLLA blocks lamellar domains. Selective basic hydrolysis of the PLLA blocks generates thin films, patterned with nanometric channels containing hydrophilic PEO chains pending from PS walls. The shape and size of the channels and the degree of hydrophilicity of the pores depend on the relative length of the blocks, the molecular mass of the BCPs, and the composition of the mixture. The strength of our approach is demonstrated in the case of physical adsorption of the hemoprotein peroxidase from horseradish (HRP) using 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) with H₂O₂ as substrate. The large surface area, the tailored pore sizes, and the functionalization with hydrophilic PEO blocks make the designed nanostructured materials suitable supports for the nanoconfinement of HRP biomolecules endowed with high catalytic performance, no mass-transfer limitations, and long-term stability.

Evidence of Lipid Exchange in Styrene Maleic Acid Lipid Particle (SMALP) Nanodisc Systems

Styrene-alt-maleic acid lipid particles (SMALPs) are self-assembled discoidal structures composed of a polymer belt and a segment of lipid bilayer, which are capable of encapsulating membrane proteins directly from the cell membrane. Here we present evidence of the exchange of lipids between such "nanodiscs" and lipid monolayers adsorbed at either solid-liquid or air-liquid interfaces. This behavior has important implications for the potential uses of nanodiscs.

Adsorption of Hydrophobin-Protein Mixtures at the Air-Water Interface: The Impact of pH and Electrolyte

The adsorption of the proteins β-casein, β-lactoglobulin, and hydrophobin, and the protein mixtures of β-casein/hydrophobin and β-lactoglobulin/hydrophobin have been studied at the air-water interface by neutron reflectivity, NR. Changing the solution pH from 7 to 2.6 has relatively little impact on the adsorption of hydrophobin or β-lactoglobulin, but results in a substantial change in the structure of the adsorbed layer of β-casein. In β-lactoglobulin/hydrophobin mixtures, the adsorption is dominated by the hydrophobin adsorption, and is independent of the hydrophobin or β-lactoglobulin concentration and solution pH. At pH 2.6, the adsorption of the β-casein/hydrophobin mixtures is dominated by the hydrophobin adsorption over the range of β-casein concentrations studied. At pH 4 and 7, the adsorption of β-casein/hydrophobin mixtures is dominated by the hydrophobin adsorption at low β-casein concentrations. At higher β-casein concentrations, β-casein is adsorbed onto the surface monolayer of hydrophobin, and some interpenetration between the two proteins occurs. These results illustrate the importance of pH on the intermolecular interactions between the two proteins at the interface. This is further confirmed by the impact of PBS, phosphate buffered saline, buffer and CaCl2 on the coadsorption and surface structure. The results provide an important insight into the adsorption properties of protein mixtures and their application in foam and emulsion stabilization.

Neutron reflectometry from poly (ethylene-glycol) brushes binding anti-PEG antibodies: evidence of ternary adsorption

Neutron reflectometry provides evidence of ternary protein adsorption within polyethylene glycol (PEG) brushes. Anti-PEG Immunoglobulin G antibodies (Abs) binding the methoxy terminated PEG chain segment specifically adsorb onto PEG brushes grafted to lipid monolayers on a solid support. The Abs adsorb at the outer edge of the brush. The thickness and density of the adsorbed Ab layer, as well as its distance from the grafting surface grow with increasing brush density. At high densities most of the protein is excluded from the brush. The results are consistent with an inverted "Y" configuration with the two FAB segments facing the brush. They suggest that increasing the grafting density favors narrowing of the angle between the FAB segments as well as overall orientation of the bound Abs perpendicular to the surface.

Determining the structure of interfacial peptide films: comparing neutron reflectometry and molecular dynamics simulations

The peptides AM1 and Lac21E self-organize into switchable films at an air-water interface. In an earlier study, it was proposed that both AM1 and Lac21E formed monolayers of α-helical peptides based on consistency with neutron reflectivity data. In this article, molecular dynamics simulations of assemblies of helical and nonhelical AM1 and Lac21E at an air-water interface suggest some tendency for the peptides to spontaneously adopt an α-helical conformation. However, irrespective of the structure of the peptides, the simulations reproduced not only the structural properties of the films (thickness and distribution of the hydrophobic and hydrophilic amino acids) but also the experimental neutron reflectivity measurements at different contrast variations. This suggests that neutron reflectometry alone cannot be used to determine the structure of the peptides in this case. However, together with molecular dynamics simulations, it is possible to obtain a detailed understanding of peptide films at an atomic level.

Interfacial structure of immobilized antibodies and perdeuterated HSA in model pregnancy tests measured with neutron reflectivity

Experimental studies of antibody adsorption and antigen binding that mimicked pregnancy test immunoassays have been performed using neutron reflectivity studies of a model antibody/antigen system immobilized on the silica/water interface. The study revealed the nature of the antibody/antigen interaction and also the importance of a blocking protein, in this case human serum albumin (HSA), that enhances the immunoassay's specificity and efficiency. Of central importance to this study has been the use of a perdeuterated human serum albumin (d-HSA), providing contrast that highlights the orientation and position of the blocking agent within the adsorbed layer. It was found that the adsorbed HSA filled the gaps between the preadsorbed antibodies on the substrate, with decreased adsorption occurring as a function of increased antibody surface coverage. In addition, the antigen binding capacity of the adsorbed antibodies was investigated as a function of antibody surface coverage. The amount of specifically bound antigen was found to saturate at approximately 0.17 mg/m(2) and became independent of the antibody surface coverage. The ratio of bound antigen to immobilized antibody decreased with increased antibody surface coverage. These results are of importance for a full understanding of immunoassay systems that are widely used in clinical tests and in the detection of environmental contaminants.

Neutron reflectometry elucidates density profiles of deuterated proteins adsorbed onto surfaces displaying poly(ethylene glycol) brushes: evidence for primary adsorption

The concentration profile of deuterated myoglobin (Mb) adsorbed onto polystyrene substrates displaying poly(ethylene glycol) (PEG) brushes is characterized by neutron reflectometry (NR). The method allows to directly distinguish among primary adsorption at the grafting surface, ternary adsorption within the brush, and secondary adsorption at the brush outer edge. It complements depth-insensitive standard techniques, such as ellipsometry, radioactive labeling, and quartz crystal microbalance. The study explores the effect of the PEG polymerization degree, N, and the grafting density, σ, on Mb adsorption. In the studied systems there is no indication of secondary or ternary adsorption, but there is evidence of primary adsorption involving a dense inner layer at the polystyrene surface. For sparsely grafted brushes the primary adsorption involves an additional dilute outer protein layer on top of the inner layer. The amount of protein adsorbed in the inner layer is independent of N but varies with σ, while for the outer layer it is correlated to the amount of grafted PEG and is thus sensitive to both N and σ. The use of deuterated proteins enhances the sensitivity of NR and enables monitoring exchange between deuterated and hydrogenated species.

Interfacial assembly of lipopeptide surfactants on octyltrimethoxysilane-modified silica surface

The adsorption of a series of cationic lipopeptide surfactants, C14Kn (where C14 denotes the myristic acyl chain and Kn represents n number of lysine residues) at the hydrophobic solid/water interface has been studied using spectroscopic ellipsometry (SE) and neutron reflection (NR). The hydrophobic C8 surface was prepared by grafting a monolayer of octyltrimethoxysilane on the silicon surface. SE was used to follow the dynamic adsorption from these lipopeptide surfactants and the amount was found to undergo a fast increase within the first 2-3 min, followed by a much slower process tending to equilibration in the subsequent 15-20 min. Lipopetide surfactants with n = 1-4 showed similar dynamic features, indicating that the interaction between the acyl chain and the C8 surface is the main driving force for adsorption. The saturation adsorption amount of C14Kn at the C8/water interface was found to be inversely related to the increasing number of Lys residues in the head group due to the increase of steric hindrance and electrostatic repulsion between the head groups. Solution concentration had a significant effect on the initial adsorption rate, similar to the feature observed from nonionic surfactants CmEn. The structure of the adsorbed layers was studied by NR in conjunction with isotopic contrasts. The layer formed by the head groups of C14K1 was 10 Å thick, and those formed by C14K2, C14K3 and C14K4 head groups were all about 13 Å thick. In contrast, the thicknesses of the layers formed by hydrophobic tails of C14K1, C14K2 C14K3, and C14K4 were found to be 17, 13, 10, and 10 Å, respectively, resulting in the steady increase of area per molecule at the interface from 29 ± 2 Å(2) for C14K1 to 65 ± 2 Å(2) for C14K4. Thus, with an increase in the head group length, the molecules in the adsorbed layer tended to lie down upon adsorption.

Using in situ X-ray reflectivity to study protein adsorption on hydrophilic and hydrophobic surfaces: benefits and limitations

We have employed in situ X-ray reflectivity (IXRR) to study the adsorption of a variety of proteins (lysozyme, cytochrome c, myoglobin, hemoglobin, serum albumin, and immunoglobulin G) on model hydrophilic (silicon oxide) and hydrophobic surfaces (octadecyltrichlorosilane self-assembled monolayers), evaluating this recently developed technique for its applicability in the area of biomolecular studies. We report herein the highest resolution depiction of adsorbed protein films, greatly improving on the precision of previous neutron reflectivity (NR) results and previous IXRR studies. We were able to perform complete scans in 5 min or less with the maximum momentum transfer of at least 0.52 Å(-1), allowing for some time-resolved information about the evolution of the protein film structure. The three smallest proteins (lysozyme, cytochrome c, and myoglobin) were seen to deposit as fully hydrated, nondenatured molecules onto hydrophilic surfaces, with indications of particular preferential orientations. Time evolution was observed for both lysozyme and myoglobin films. The larger proteins were not observed to deposit on the hydrophilic substrates, perhaps because of contrast limitations. On hydrophobic surfaces, all proteins were seen to denature extensively in a qualitatively similar way but with a rough trend that the larger proteins resulted in lower coverage. We have generated high-resolution electron density profiles of these denatured films, including capturing the growth of a lysozyme film. Because the solution interface of these denatured films is diffuse, IXRR cannot unambiguously determine the film extent and coverage, a drawback compared to NR. X-ray radiation damage was systematically evaluated, including the controlled exposure of protein films to high-intensity X-rays and exposure of the hydrophobic surface to X-rays before adsorption. Our analysis showed that standard measuring procedures used for XRR studies may lead to altered protein films; therefore, we used modified procedures to limit the influence of X-ray damage.

The self-assembly, aggregation and phase transitions of food protein systems in one, two and three dimensions

The aggregation of proteins is of fundamental relevance in a number of daily phenomena, as important and diverse as blood coagulation, medical diseases, or cooking an egg in the kitchen. Colloidal food systems, in particular, are examples that have great significance for protein aggregation, not only for their importance and implications, which touches on everyday life, but also because they allow the limits of the colloidal science analogy to be tested in a much broader window of conditions, such as pH, ionic strength, concentration and temperature. Thus, studying the aggregation and self-assembly of proteins in foods challenges our understanding of these complex systems from both the molecular and statistical physics perspectives. Last but not least, food offers a unique playground to study the aggregation of proteins in three, two and one dimensions, that is to say, in the bulk, at air/water and oil/water interfaces and in protein fibrillation phenomena. In this review we will tackle this very ambitious task in order to discuss the current understanding of protein aggregation in the framework of foods, which is possibly one of the broadest contexts, yet is of tremendous daily relevance.

Adsorption and dilational rheology of mixed β-casein/DoTAB layers formed by sequential and simultaneous adsorption at the water/hexane interface

The interfacial behavior of β-casein (βCS) has been investigated in presence of the cationic surfactant dodecyl trimethyl ammonium bromide (DoTAB) at the water/hexane interface and compared to that obtained for the water/air interface. The used experimental technique is a drop profile analysis tensiometer specially equipped with a coaxial double capillary, which allows investigation of sequential adsorption of individual components besides the traditional simultaneous adsorption of two species. This method also provides the dilational rheological measurements based on low frequency harmonic drop oscillations. The tensiometric results show that the equilibrium states of the mixed βCS/DoTAB layers built up on the two different routes do not differ significantly, that is, the general compositions of the mixed layers are similar. However, the results of dilational rheology for the two adsorption strategies are remarkably different indicating different dynamic characteristics of the adsorbed layers. These findings suggest that the respective mixed layers are more proteinlike if they are formed via sequential adsorption and more surfactant-like after simultaneous adsorption. In contrast to the W/A interface, at the W/H interface proteins remain at the interface once adsorbed and cannot be displaced just by competitive adsorption of surfactants.

Analysis of casein biopolymers adsorption to lignocellulosic biomass as a potential cellulase stabilizer

Although lignocellulosic materials have a good potential to substitute current feedstocks used for ethanol production, conversion of these materials to fermentable sugars is still not economical through enzymatic hydrolysis. High cost of cellulase has prompted research to explore techniques that can prevent from enzyme deactivation. Colloidal proteins of casein can form monolayers on hydrophobic surfaces that alleviate the de-activation of protein of interest. Scanning electron microscope (SEM), fourier transform infrared spectroscopy (FT-IR), capillary electrophoresis (CE), and Kjeldahl and BSA protein assays were used to investigate the unknown mechanism of action of induced cellulase activity during hydrolysis of casein-treated biomass. Adsorption of casein to biomass was observed with all of the analytical techniques used and varied depending on the pretreatment techniques of biomass. FT-IR analysis of amides I and II suggested that the substructure of protein from casein or skim milk were deformed at the time of contact with biomass. With no additive, the majority of one of the cellulase mono-component, 97.1 ± 1.1, was adsorbed to CS within 24 h, this adsorption was irreversible and increased by 2% after 72 h. However, biomass treatment with skim-milk and casein reduced the adsorption to 32.9% ± 6.0 and 82.8% ± 6.0, respectively.

A neutron reflection study of adsorbed deuterated myoglobin layers on hydrophobic surfaces

The structure of adsorbed globular protein layers on hydrophobic surfaces is elucidated in detail by combining the use of a fully deuterated protein, myoglobin, and the neutron reflectivity technique. The hydrophobic surfaces consist of grafted self-assembled monolayer of octadecyltrichlorosilane (OTS) and polystyrene (PS) layer on silicon substrates. Different protein concentrations ranging from 1mg/ml to 0.01 mg/ml are used. On the OTS surface and for low protein concentration, the adsorbed protein layer consists of a dense layer of thickness around 13Å indicating that proteins are denaturated when adsorbed on the hydrophobic interface - myoglobin being a globular protein with an average diameter of about 40Å. At high protein concentration, an additional layer is observed on the top of this first denaturated layer. The thickness of this layer corresponds roughly to the dimensions of the myoglobin suggesting that additional proteins in their bulk conformation are adsorbed on the top. In the case of PS, the protein is significantly less flattened at the interface, PS being a less hydrophobic surface.

Label-free quantitation of peptide release from neurons in a microfluidic device with mass spectrometry imaging

Microfluidic technology allows the manipulation of mass-limited samples and when used with cultured cells, enables control of the extracellular microenvironment, making it well suited for studying neurons and their response to environmental perturbations. While matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) provides for off-line coupling to microfluidic devices for characterizing small-volume extracellular releasates, performing quantitative studies with MALDI is challenging. Here we describe a label-free absolute quantitation approach for microfluidic devices. We optimize device fabrication to prevent analyte losses before measurement and then incorporate a substrate that collects the analytes as they flow through a collection channel. Following collection, the channel is interrogated using MS imaging. Rather than quantifying the sample present via MS peak height, the length of the channel containing appreciable analyte signal is used as a measure of analyte amount. A linear relationship between peptide amount and band length is suggested by modeling the adsorption process and this relationship is validated using two neuropeptides, acidic peptide (AP) and α-bag cell peptide [1-9] (αBCP). The variance of length measurement, defined as the ratio of standard error to mean value, is as low as 3% between devices. The limit of detection (LOD) of our system is 600 fmol for AP and 400 fmol for αBCP. Using appropriate calibrations, we determined that an individual Aplysia bag cell neuron secretes 0.15 ± 0.03 pmol of AP and 0.13 ± 0.06 pmol of αBCP after being stimulated with elevated KCl. This quantitation approach is robust, does not require labeling, and is well suited for miniaturized off-line characterization from microfluidic devices.

Conformational changes of α-lactalbumin adsorbed at oil-water interfaces: interplay between protein structure and emulsion stability

The conformation and structural dimensions of α-lactalbumin (α-La) both in solution and adsorbed at oil-water interfaces of emulsions were investigated using synchrotron radiation circular dichroism (SRCD) spectroscopy, front-face tryptophan fluorescence (FFTF) spectroscopy, and dual polarization interferometry (DPI). The near-UV SRCD and the FFTF results demonstrated that the hydrophobic environment of the aromatic residues located in the hydrophobic core of native α-La was significantly altered upon adsorption, indicating the unfolding of the hydrophobic core of α-La upon adsorption. The far-UV SRCD results showed that adsorption of α-La at oil-water interfaces created a new non-native secondary structure that was more stable to thermally induced conformational changes. Specifically, the α-helical conformation increased from 29.9% in solution to 45.8% at the tricaprylin-water interface and to 58.5% at the hexadecane-water interface. However, the β-sheet structure decreased from 18.0% in solution to less than 10% at both oil-water interfaces. The DPI study showed that adsorption of α-La to a hydrophobic C18-water surface caused a change in the dimensions of α-La from the native globule-like shape (2.5-3.7 nm) to a compact/dense layer approximately 1.1 nm thick. Analysis of the colloidal stability of α-La stabilized emulsions showed that these emulsions were physically stable against droplet flocculation at elevated temperatures both in the absence and in the presence of 120 mM NaCl. In the absence of salt, the thermal stability of emulsions was due to the strong electrostatic repulsion provided by the adsorbed α-La layer, which was formed after the adsorption and structural rearrangement. In the presence of salt, although the electrostatic repulsion was reduced via electrostatic screening, heating did not induce strong and permanent droplet flocculation. The thermal stability of α-La stabilized emulsions in the presence of salt is a combined effect of the electrostatic repulsion and the lack of covalent disulfide interchange reactions. This study reports new information on the secondary and tertiary structural changes of α-La upon adsorption to oil-water interfaces. It also presents new results on the physical stability of α-La stabilized emulsions during heating and at moderate ionic strength (120 mM NaCl). The results broaden our understanding of the factors controlling protein structural change at emulsion interfaces and how this affects emulsion stability.

Adsorption behavior of hydrophobin and hydrophobin/surfactant mixtures at the solid-solution interface

The adsorption of surface-active protein hydrophobin, HFBII, and HFBII/surfactant mixtures at the solid-solution interface has been studied by neutron reflectivity, NR. At the hydrophilic silicon surface, HFBII adsorbs reversibly in the form of a bilayer at the interface. HFBII adsorption dominates the coadsorption of HFBII with cationic and anionic surfactants hexadecyltrimethyl ammonium bromide, CTAB, and sodium dodecyl sulfate, SDS, at concentrations below the critical micellar concentration, cmc, of conventional cosurfactants. For surfactant concentrations above the cmc, HFBII/surfactant solution complex formation dominates and there is little HFBII adsorption. Above the cmc, CTAB replaces HFBII at the interface, but for SDS, there is no affinity for the anionic silicon surface hence there is no resultant adsorption. HFBII adsorbs onto a hydrophobic surface (established by an octadecyl trimethyl silane, OTS, layer on silicon) irreversibly as a monolayer, similar to what is observed at the air-water interface but with a different orientation at the interface. Below the cmc, SDS and CTAB have little impact upon the adsorbed layer of HFBII. For concentrations above the cmc, conventional surfactants (CTAB and SDS) displace most of the HFBII at the interface. For nonionic surfactant C(12)E(6), the pattern of adsorption is slightly different, and although some coadsorption at the interface takes place, C(12)E(6) has little impact on the HFBII adsorption.

Structural rearrangement of β-lactoglobulin at different oil-water interfaces and its effect on emulsion stability

Understanding the factors that control protein structure and stability at the oil-water interface continues to be a major focus to optimize the formulation of protein-stabilized emulsions. In this study, a combination of synchrotron radiation circular dichroism spectroscopy, front-face fluorescence spectroscopy, and dual polarization interferometry (DPI) was used to characterize the conformation and geometric structure of β-lactoglobulin (β-Lg) upon adsorption to two oil-water interfaces: a hexadecane-water interface and a tricaprylin-water interface. The results show that, upon adsorption to both oil-water interfaces, β-Lg went through a β-sheet to α-helix transition with a corresponding loss of its globular tertiary structure. The degree of conformational change was also a function of the oil phase polarity. The hexadecane oil induced a much higher degree of non-native α-helix compared to the tricaprylin oil. In contrast to the β-Lg conformation in solution, the non-native α-helical-rich conformation of β-Lg at the interface was resistant to further conformational change upon heating. DPI measurements suggest that β-Lg formed a thin dense layer at emulsion droplet surfaces. The effects of high temperature and the presence of salt on these β-Lg emulsions were then investigated by monitoring changes in the ζ-potential and particle size. In the absence of salt, high electrostatic repulsion meant β-Lg-stabilized emulsions were resistant to heating to 90 °C. Adding salt (120 mM NaCl) before or after heating led to emulsion flocculation due to the screening of the electrostatic repulsion between colloidal particles. This study has provided insight into the structural properties of proteins adsorbed at the oil-water interface and has implications in the formulation and production of emulsions stabilized by globular proteins.

Depletion at solid/liquid interfaces: flowing hexadecane on functionalized surfaces

We present a neutron reflectivity study on interfaces in contact with flowing hexadecane, which is known to exhibit surface slip on functionalized solid surfaces. The single crystalline silicon substrates were either chemically cleaned Si(100) or Si(100) coated by octadecyl-trichlorosilane (OTS), which resulted in different interfacial energies. The liquid was sheared in situ and changes in reflectivity profiles were compared to the static case. For the OTS surface, the temperature dependence was also recorded. For both types of interfaces, density depletion of the liquid at the interface was observed. In the case of the bare Si substrate, shear load altered the structure of the depletion layer, whereas for the OTS covered surface no effect of shear was observed. Possible links between the depletion layer and surface slip are discussed. The results show that, in contrast to water, for hexadecane the enhancement of the depletion layer with temperature and interfacial energy reduces the amount of slip. Thus a density depletion cannot be the origin of surface slip in this system.

Changes in beta-lactoglobulin conformation at the oil/water interface of emulsions studied by synchrotron radiation circular dichroism spectroscopy

The structure of proteins at interfaces is a key factor determining the stability as well as organoleptic properties of food emulsions. While it is widely believed that proteins undergo conformational changes at interfaces, the measurement of these structural changes remains a significant challenge. In this study, the conformational changes of beta-lactoglobulin (beta-Lg) upon adsorption to the interface of hexadecane oil-in-water emulsions were investigated using synchrotron radiation circular dichroism (SRCD) spectroscopy. Far-UV SRCD spectra showed that adsorption of beta-Lg to the O/W interface caused a significant increase in non-native alpha-helix structure, accompanied by a concomitant loss of beta-sheet structure. Near-UV SRCD spectra revealed that a considerable disruption of beta-Lg tertiary structure occurred upon adsorption. Moreover, heat-induced changes to the non-native beta-Lg conformation at the oil/water interface were very small compared to the dramatic loss of beta-Lg secondary structure that occurred during heating in solution, suggesting that the interface has a stabilizing effect on the structure of non-native beta-Lg. Overall, our findings provide insight into the conformational behavior of proteins at oil/water interfaces and demonstrate the applicability of SRCD spectroscopy for measuring the conformation of adsorbed proteins in optically turbid emulsions.

Adsorption of a water treatment protein from Moringa oleifera seeds to a silicon oxide surface studied by neutron reflection

An extract from the seeds of the Moringa oleifera tree that is principally a low molecular mass protein is known to be efficient as a coagulating agent for water treatment. The present paper investigates the adsorption of the purified protein to silica interfaces in order to elucidate the mechanism of its function as a flocculent. Neutron reflection permits the determination of the structure and composition of interfacial layers at the solid/solution interface. Dense layers of protein with about 5.5 mg m(-2) were found at concentrations above 0.025% wt. The overall thickness with a dense layer in excess of 60 A at 0.05 wt % suggests strong co-operative binding rather than single isolated molecules. An ionic surfactant, sodium dodecyl sulfate, was also seen to coadsorb. This strong adsorption of protein in combination with the tendency for the protein to associate suggests a mechanism for destabilizing particulate dispersions to provide filterable water. This can occur even for the protein that has previously been identified as being of low mass (about 7 kDaltons) and thus is unlikely to be efficient in bridging or depletion flocculation.

Interfacial assembly of proteins and peptides: recent examples studied by neutron reflection

Through reviewing a number of recent neutron reflection studies of interfacial adsorption of peptides and proteins, this paper aims to demonstrate the significance of this technique in studying interfacial biomolecular processes by illustrating the typical structural details that can be derived. The review will start with the introduction of relevant theoretical background, followed by an outline of representative biomolecular systems that have recently been studied to indicate the technical strengths of neutron reflection.

Surface-bound casein modulates the adsorption and activity of kinesin on SiO2 surfaces

Conventional kinesin is routinely adsorbed to hydrophilic surfaces such as SiO(2). Pretreatment of surfaces with casein has become the standard protocol for achieving optimal kinesin activity, but the mechanism by which casein enhances kinesin surface adsorption and function is poorly understood. We used quartz crystal microbalance measurements and microtubule gliding assays to uncover the role that casein plays in enhancing the activity of surface-adsorbed kinesin. On SiO(2) surfaces, casein adsorbs as both a tightly bound monolayer and a reversibly bound second layer that has a dissociation constant of 500 nM and can be desorbed by washing with casein-free buffer. Experiments using truncated kinesins demonstrate that in the presence of soluble casein, kinesin tails bind well to the surface, whereas kinesin head binding is blocked. Removing soluble casein reverses these binding profiles. Surprisingly, reversibly bound casein plays only a moderate role during kinesin adsorption, but it significantly enhances kinesin activity when surface-adsorbed motors are interacting with microtubules. These results point to a model in which a dynamic casein bilayer prevents reversible association of the heads with the surface and enhances association of the kinesin tail with the surface. Understanding protein-surface interactions in this model system should provide a framework for engineering surfaces for functional adsorption of other motor proteins and surface-active enzymes.

Millisecond curing time of a molecular adhesive causes velocity-dependent cargo-loading of molecular shuttles

It has been recently discovered that biological systems exploit complex intermolecular bonds, such as the "catch bond" between FimH proteins and mannose, to regulate dynamic assembly processes. Here we show that the assembly of hybrid nanostructures also has to account for and ideally exploit the subtleties of the utilized intermolecular interactions. We focus on the biotin-streptavidin bond, which gains its ultimate strength on a time scale of milliseconds, due to existence of metastable binding states. As a consequence of the gluelike character of this widely used intermolecular bond, the velocity of molecular shuttles, active nanoscale transport systems based on biomolecular motors and their associated filaments, has to be optimized to permit efficient attachment of cargo via biotin-streptavidin linkages. The attachment process can only be understood by combining rigorous mechanical engineering analysis with detailed physicochemical models.

Electro-oxidative nanopatterning of silane monolayers on boron-doped diamond electrodes

Oxidized boron-doped diamond (BDD) electrodes were coated with a monolayer of n-octadecyltrichlorosilane as well as of other silanes. Scanning force microscopy was applied to pattern these monolayers, utilizing doped diamond-coated conductive probes. Patterns were generated on the nanometer scale, and conditions for the patterning process were quantified with regard to humidity and potential bias. It was observed that a sample bias of 3-3.5 V and a relative humidity >70% are necessary to generate reproducible and stable patterns. At potentials and relative humidities below these values, no or incomplete removal of the monolayer occurred. The results show that electro-oxidative patterning is an expedient way for the generation of nanostructures on chemically modified BDD.

Equilibrium of adsorption of mixed milk protein/surfactant solutions at the water/air interface

Ellipsometry and surface profile analysis tensiometry were used to study and compare the adsorption behavior of beta-lactoglobulin (BLG)/C10DMPO, beta-casein (BCS)/C10DMPO and BCS/C12DMPO mixtures at the air/solution interface. The adsorption from protein/surfactant mixed solutions is of competitive nature. The obtained adsorption isotherms suggest a gradual replacement of the protein molecules at the interface with increasing surfactant concentration for all studied mixed systems. The thickness, refractive index, and the adsorbed amount of the respective adsorption layers, determined by ellipsometry, decrease monotonically and reach values close to those for a surface covered only by surfactant molecules, indicating the absence of proteins from a certain surfactant concentration on. These results correlate with the surface tension data. A continuous increase of adsorption layer thickness was observed up to this concentration, caused by the desorption of segments of the protein and transforming the thin surface layer into a rather diffuse and thick one. Replacement and structural changes of the protein molecules are discussed in terms of protein structure and surface activity of surfactant molecules. Theoretical models derived recently were used for the quantitative description of the equilibrium state of the mixed surface layers.

Volumetric interpretation of protein adsorption: kinetic consequences of a slowly-concentrating interphase

Time-dependent energetics of blood-protein adsorption are interpreted in terms of a slowly-concentrating three-dimensional interphase volume initially formed by rapid diffusion of protein molecules into an interfacial region spontaneously formed by bringing a protein solution into contact with a physical surface. This modification of standard adsorption theory is motivated by the experimental observation that interfacial tensions of protein-containing solutions decrease slowly over the first hour to a steady-state value while, over this same period, the total adsorbed protein mass is constant (for lysozyme, 15 kDa; alpha-amylase, 51 KDa; albumin, 66 kDa; prothrombin, 72 kDa; IgG, 160 kDa; fibrinogen, 341 kDa studied in this work). These seemingly divergent observations are rationalized by the fact that interfacial energetics (tensions) are explicit functions of solute chemical potential (concentration), not adsorbed mass. Hence, rates of interfacial tension change parallel a slow interphase-concentration effect whereas solution depletion detects a constant interphase composition within the timeframe of experiment. A straightforward mathematical model approximating the perceived physical situation leads to an analytic formulation that is used to compute time-varying interphase volume and protein concentration from experimentally-measured interfacial tensions. Derivation from the fundamental thermodynamic adsorption equation verifies that protein adsorption from dilute solution is controlled by a partition coefficient at equilibrium, as is observed experimentally at steady state. Implications of the alternative interpretation of adsorption kinetics on biomaterials and biocompatibility are discussed.

The interfacial structure and Young's modulus of peptide films having switchable mechanical properties

We report the structure and Young's modulus of switchable films formed by peptide self-assembly at the air-water interface. Peptide surfactant AM1 forms an interfacial film that can be switched, reversibly, from a high- to low-elasticity state, with rapid loss of emulsion and foam stability. Using neutron reflectometry, we find that the AM1 film comprises a thin (approx. 15A) layer of ordered peptide in both states, confirming that it is possible to drastically alter the mechanical properties of an interfacial ensemble without significantly altering its concentration or macromolecular organization. We also report the first experimentally determined Young's modulus of a peptide film self-assembled at the air-water interface (E=80MPa for AM1, switching to E<20MPa). These findings suggest a fundamental link between E and the macroscopic stability of peptide-containing foam. Finally, we report studies of a designed peptide surfactant, Lac21E, which we find forms a stronger switchable film than AM1 (E=335MPa switching to E<4MPa). In contrast to AM1, Lac21E switching is caused by peptide dissociation from the interface (i.e. by self-disassembly). This research confirms that small changes in molecular design can lead to similar macroscopic behaviour via surprisingly different mechanisms.