Organic chemistry. A rhodium catalyst for single-step styrene production from benzene and ethylene

Hexa-Fe(III) Carboxylate Complexes Facilitate Aerobic Hydrocarbon Oxidative Functionalization: Rh Catalyzed Oxidative Coupling of Benzene and Ethylene to Form Styrene

Fe(II) carboxylates react with dioxygen and carboxylic acid to form Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 (X = acetate or pivalate), which is an active oxidant for Rh-catalyzed arene alkenylation. Heating (150-200 °C) the catalyst precursor [(η2-C2H4)2Rh(μ-OAc)]2 with ethylene, benzene, Fe(II) carboxylate, and dioxygen yields styrene >30-fold faster than the reaction with dioxygen in the absence of the Fe(II) carboxylate additive. It is also demonstrated that Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 is an active oxidant under anaerobic conditions, and the reduced material can be reoxidized to Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 by dioxygen. At optimized conditions, a turnover frequency of ∼0.2 s-1 is achieved. Unlike analogous reactions with Cu(II) carboxylate oxidants, which undergo stoichiometric Cu(II)-mediated production of phenyl esters (e.g., phenyl acetate) as side products at temperatures ≥150 °C, no phenyl ester side product is observed when Fe carboxylate additives are used. Kinetic isotope effect experiments using C6H6 and C6D6 give k H/k D = 3.5(3), while the use of protio or monodeutero pivalic acid reveals a small KIE with k H/k D = 1.19(2). First-order dependencies on Fe(II) carboxylate and dioxygen concentration are observed in addition to complicated kinetic dependencies on the concentration of carboxylic acid and ethylene, both of which inhibit the reaction rate at a high concentration. Mechanistic studies are consistent with irreversible benzene C-H activation, ethylene insertion into the formed Rh-Ph bond, β-hydride elimination, and reaction of Rh-H with Fe6(μ-OH)2(μ3-O)2(μ-X)12(HX)2 to regenerate a Rh-carboxylate complex.

Rhodium-Catalyzed Oxidative Alkenylation of Anisole: Control of Regioselectivity

We report the conversion of anisoles and olefins to alkenyl anisoles via a transition-metal-catalyzed arene C-H activation and olefin insertion mechanism. The catalyst precursor, [(η2-C2H4)2Rh(μ-OAc)]2, and the in situ oxidant Cu(OPiv)2 (OPiv = pivalate) convert anisoles and olefins (ethylene or propylene) to alkenyl anisoles. When ethylene is used as the olefin, the o/m/p ratio varies between approximately 1:3:1 (selective for 3-methoxystyrene) and 1:5:10 (selective for 4-methoxystyrene). When propylene is the olefin, the o/m/p regioselectivity varies between approximately 1:8:20 and 1:8.5:5. The o/m/p ratios depend on the concentration of pivalic acid and olefin. For example, when using ethylene, at relatively high pivalic acid concentrations and low ethylene concentrations, the o/m/p regioselectivity is 1:3:1. Conversely, again for use of ethylene, at relatively low pivalic acid concentrations and high ethylene concentrations, the o/m/p regioselectivity is 1:5:10. Mechanistic studies of the conversion of anisoles and olefins to alkenyl anisoles provide evidence that the regioselectivity is likely under Curtin-Hammett conditions.

Highly Anti-Markovnikov Selective Oxidative Arene Alkenylation Using Ir(I) Catalyst Precursors and Cu(II) Carboxylates

The Ir(I) complex [Ir(μ-Cl)(coe)2]2 (coe = cis-cyclooctene) is a catalyst precursor for benzene alkenylation using Cu(II) carboxylate salts. Using [Ir(μ-Cl)(coe)2]2, propenylbenzenes are formed from the reaction of benzene, propylene, and CuX2 (X = acetate, pivalate, or 2-ethylhexanoate). The Ir-catalyzed reactions selectively produce anti-Markovnikov products, trans-β-methylstyrene, cis-β-methylstyrene, and allylbenzene, along with minor amounts of the Markovnikov product, α-methylstyrene. The selectivity for the anti-Markovnikov products changed as the reaction progressed. For example, in a reaction that uses 240 equiv of Cu(OHex)2 (related to Ir), the selectivity for the anti-Markovnikov products increases from 18:1 at 3 h to 42:1 at 42 h with 30 psig of propylene at 150 °C. Studies of product stability have revealed that the increase in the selectivity for anti-Markovnikov products is not the result of an isomerization process or the selective decomposition of specific products. Rather, the change in selectivity correlates with the ratio of Cu(II) to Cu(I) in the solution, which decreases as the reaction progresses. We propose that the identity of the active catalyst changes as Cu(I) is accumulated, resulting in the formation of an active catalyst that is more selective for anti-Markovnikov products. Using a 4:1 Cu(I)/Cu(II) ratio at the start of the reaction, a 65(3):1 anti-Markovnikov/Markovnikov ratio is observed.

Restructuring Surface Lewis Pairs of FAU Zeolite through N Doping for Boosting the Toluene Side-Chain Alkylation Performance

Toluene side-chain alkylation with methanol for the styrene monomer formation remains a great challenge. An optimal synergy between acidic and basic sites on zeolites is required for an efficient catalysis process. It is important to modulate the surface Lewis acid-base pairs precisely. Herein, we report a strategy to restructure the surface Lewis acid-base pairs in cesium-modified X zeolite (CsX) by N doping. In the process of toluene side-chain alkylation, the CsX-BN-600 catalyst, where N species is doped into the framework of the X zeolite, exhibits 2.7 times the styrene formation rate and a much better selectivity of 85.7% in comparison to the parent CsX of 70.1% selectivity to styrene at the same reaction conditions. The introduction of N species into zeolites acts as a new Lewis base site and optimizes the Lewis sites due to its ability of electron donation. Meanwhile, the frustrated Lewis pair (FLP) between the deprotonated framework nitrogen in X zeolite and positively polarized C species in the side-chain alkylation reaction is created. Furthermore, the N doping contributes to the generation of the active intermediates of HCOO* and H3CO*. These reasons favor the superiority of the catalyst through N doping.

Pd(II) and Rh(I) Catalytic Precursors for Arene Alkenylation: Comparative Evaluation of Reactivity and Mechanism Based on Experimental and Computational Studies

We combine experimental and computational investigations to compare and understand catalytic arene alkenylation using the Pd(II) and Rh(I) precursors Pd(OAc)₂ and [(η²-C₂H₄)₂Rh(μ-OAc)]₂ with arene, olefin, and Cu(II) carboxylate at elevated temperatures (>120 °C). Under specific conditions, previous computational and experimental efforts have identified heterotrimetallic cyclic PdCu₂(η²-C₂H₄)₃(μ-OPiv)₆ and [(η²-C₂H₄)₂Rh(μ-OPiv)₂]₂(μ-Cu) (OPiv = pivalate) species as likely active catalysts for these processes. Further studies of catalyst speciation suggest a complicated equilibrium between Cu(II)-containing complexes containing one Rh or Pd atom with complexes containing two Rh or Pd atoms. At 120 °C, Rh catalysis produces styrene >20-fold more rapidly than Pd. Also, at 120 °C, Rh is ∼98% selective for styrene formation, while Pd is ∼82% selective. Our studies indicate that Pd catalysis has a higher predilection toward olefin functionalization to form undesired vinyl ester, while Rh catalysis is more selective for arene/olefin coupling. However, at elevated temperatures, Pd converts vinyl ester and arene to vinyl arene, which is proposed to occur through low-valent Pd(0) clusters that are formed in situ. Regardless of arene functionality, the regioselectivity for alkenylation of mono-substituted arenes with the Rh catalyst gives an approximate 2:1 meta/para ratio with minimal ortho C-H activation. In contrast, Pd selectivity is significantly influenced by arene electronics, with electron-rich arenes giving an approximate 1:2:2 ortho/meta/para ratio, while the electron-deficient (α,α,α)-trifluorotoluene gives a 3:1 meta/para ratio with minimal ortho functionalization. Kinetic intermolecular arene ethenylation competition experiments find that Rh reacts most rapidly with benzene, and the rate of mono-substituted arene alkenylation does not correlate with arene electronics. In contrast, with Pd catalysis, electron-rich arenes react more rapidly than benzene, while electron-deficient arenes react less rapidly than benzene. These experimental findings, in combination with computational results, are consistent with the arene C-H activation step for Pd catalysis involving significant η¹-arenium character due to Pd-mediated electrophilic aromatic substitution character. In contrast, the mechanism for Rh catalysis is not sensitive to arene-substituent electronics, which we propose indicates less electrophilic aromatic substitution character for the Rh-mediated arene C-H activation.

Functionality-Directed Regio- and Enantio-Selective Olefinic C-H Functionalization of Aryl Alkenes

Aryl alkenes represents one of the most widely occurring structural motif in countless drugs and natural products, and direct C-H functionalization of aryl alkenes provides atom- step efficient access toward valuable analogues. Among them, group-directed selective olefinic α- and β-C-H functionalization, bearing a directing group on the aromatic ring, has attracted remarkable attentions, including alkynylation, alkenylation, amino-carbonylation, cyanation, domino cyclization and so on. These transformations proceed by endo- and exo-C-H cyclometallation and provide aryl alkene derivatives in excellent site- stereo-selectivity. Enantio-selective α- and β- olefinic C-H functionalization were also covered to synthesis axially chiral styrenes.

Electrochemical recycling of homogeneous catalysts

Homogeneous catalysts have rapid kinetics and keen reaction selectivity. However, their widespread use for industrial catalysis has remained limited because of challenges in reusability. Here, we propose a redox-mediated electrochemical approach for catalyst recycling using metallopolymer-functionalized electrodes for binding and release. The redox platform was investigated for the separation of key platinum and palladium homogeneous catalysts used in organic synthesis and industrial chemical manufacturing. Noble metal catalysts for hydrosilylation, silane etherification, Suzuki cross-coupling, and Wacker oxidation were recycled electrochemically. The redox electrodes demonstrated high sorption uptake for platinum-based catalysts (Q_max up to 200 milligrams of platinum per gram of adsorbent) from product mixtures, with up to 99.5% recovery, while retaining full catalytic activity over multiple cycles. The combination of mechanistic studies and electronic structure calculations indicate that selective interactions with anionic intermediates during the catalytic cycle played a key role in the separations. Last, continuous flow cell studies support the scalability and favorable technoeconomics of electrochemical recycling.

Electron-Deficient Ru(II) Complexes as Catalyst Precursors for Ethylene Hydrophenylation

Ruthenium(II) complexes with the general formula TpRu(L)(NCMe)Ph (Tp = hydrido(trispyrazolyl)borate, L = CO, PMe3, P(OCH2)3CEt, P(pyr)3, P(OCH2)2(O)CCH3) have previously been shown to catalyze arene alkylation via Ru-mediated arene C–H activation including the conversion of benzene and ethylene to ethylbenzene. Previous studies have suggested that the catalytic performance of these TpRu(II) catalysts increases with reduced electron-density at the Ru center. Herein, three new structurally related Ru(II) complexes are synthesized, characterized, and studied for possible catalytic benzene ethylation. TpRu(NO)Ph2 exhibited low stability due to the facile elimination of biphenyl. The Ru(II) complex (TpBr3)Ru(NCMe)(P(OCH2)3CEt)Ph (TpBr3 = hydridotris(3,4,5-tribromopyrazol-1-yl)borate) showed no catalytic activity for the conversion of benzene and ethylene to ethylbenzene, likely due to the steric bulk introduced by the bromine substituents. (Ttz)Ru(NCMe)(P(OCH2)3CEt)Ph (Ttz = hydridotris(1,2,4-triazol-1-yl)borate) catalyzed approximately 150 turnover numbers (TONs) of ethylbenzene at 120 °C in the presence of Lewis acid additives. Here, we compare the activity and features of catalysis using (Ttz)Ru(NCMe)(P(OCH2)3CEt)Ph to previously reported catalysis based on TpRu(L)(NCMe)Ph catalyst precursors.

Regiospecific construction of m-alkenyl benzaldehyde from β-bromoenal and vinyl borate

Herein, we report a Pd-catalyzed regiospecific cycloaromatization of β-bromoenal and vinyl borate esters to synthesize m-alkenyl substituted benzaldehydes. This allows the construction of complex molecules from simple materials, which may be useful in the search for new optical materials.

Regio- and stereo-selective olefinic C–H functionalization of aryl alkenes in ethanol

We report on α- and β-olefinic C–H alkenylation of 2-alkenyl benzylamine/benzoic acid derivatives in ethanol to afford aryl dienes/trienes with excellent selectivities, proceeding through 6-/7-membered exo-/endo-cyclometallation.

Side-chain alkylation of toluene with methanol over cesium-ion-exchanged zeolite LSX and X catalysts

The catalyst CsLSX has a higher basic cation exchange capacity than that of the catalyst CsX. The higher number of aluminum atoms allows the CsLSX catalyst to have more oxygen atoms with a negative charge (Oδ−) in the zeolite framework.

Vinyl Thianthrenium Tetrafluoroborate: A Practical and Versatile Vinylating Reagent Made from Ethylene

The use of vinyl electrophiles in synthesis has been hampered by the lack of access to a suitable reagent that is practical and of appropriate reactivity. In this work we introduce a vinyl thianthrenium salt as an effective vinylating reagent. The bench-stable, crystalline reagent can be readily prepared from ethylene gas at atmospheric pressure in one step and is broadly useful in the annulation chemistry of (hetero)cycles, N-vinylation of heterocyclic compounds, and palladium-catalyzed cross-coupling reactions. The structural features of the thianthrene core enable a distinct synthesis and reactivity profile, unprecedented for other vinyl sulfonium derivatives.

Sustainable production of benzene from lignin

Benzene is a widely used commodity chemical, which is currently produced from fossil resources. Lignin, a waste from lignocellulosic biomass industry, is the most abundant renewable source of benzene ring in nature. Efficient production of benzene from lignin, which requires total transformation of C_sp2-C_sp3/C_sp2-O into C-H bonds without side hydrogenation, is of great importance, but has not been realized. Here, we report that high-silica HY zeolite supported RuW alloy catalyst enables in situ refining of lignin, exclusively to benzene via coupling Bronsted acid catalyzed transformation of the C_sp2-C_sp3 bonds on the local structure of lignin molecule and RuW catalyzed hydrogenolysis of the C_sp2-O bonds using the locally abstracted hydrogen from lignin molecule, affording a benzene yield of 18.8% on lignin weight basis in water system. The reaction mechanism is elucidated in detail by combination of control experiments and density functional theory calculations. The high-performance protocol can be readily scaled up to produce 8.5 g of benzene product from 50.0 g lignin without any saturation byproducts. This work opens the way to produce benzene using lignin as the feedstock efficiently.

Efficient production of benzene from lignin is attractive and of great importance, but has not been realized. Here, the authors develop a strategy to transform lignin into benzene over a RuW/zeolite catalyst in water, and the yield of benzene can be as high as 18.8% on lignin weight basis.

Bis(pertrifluoromethylcatecholato)silane: Extreme Lewis Acidity Broadens the Catalytic Portfolio of Silicon

Given its earth abundance, silicon is ideal for constructing Lewis acids of use in catalysis or materials science. Neutral silanes were limited to moderate Lewis acidity, until halogenated catecholato ligands provoked a significant boost. However, catalytic applications of bis(perhalocatecholato)silanes were suffering from very poor solubility and unknown deactivation pathways. In this work, the novel per(trifluoromethyl)catechol, H₂ cat^CF3 , and adducts of its silicon complex Si(cat^CF3 )₂ (1) are described. According to the computed fluoride ion affinity, 1 ranks among the strongest neutral Lewis acids currently accessible in the condensed phase. The improved robustness and affinity of 1 enable deoxygenations of aldehydes, ketones, amides, or phosphine oxides, and a carbonyl-olefin metathesis. All those transformations have never been catalyzed by a neutral silane. Attempts to obtain donor-free 1 attest to the extreme Lewis acidity by stabilizing adducts with even the weakest donors, such as benzophenone or hexaethyl disiloxane.

Atomic layer deposition of rhodium and palladium thin film using low-concentration ozone

Rhodium (Rh) and palladium (Pd) thin films have been fabricated using an atomic layer deposition (ALD) process using Rh(acac)₃ and Pd(hfac)₂ as the respective precursors and using short-pulse low-concentration ozone as the co-reactant. This method of fabrication does away with the need for combustible reactants such as hydrogen or oxygen, either as a precursor or as an annealing agent. All previous studies using only ozone could not yield metallic films, and required post treatment using hydrogen or oxygen. In this work, it was discovered that the concentration level of ozone used in the ALD process was critical in determining whether the pure metal film was formed, and whether the metal film was oxidized. By controlling the ozone concentration under a critical limit, the fabrication of these noble metal films was successful. Rhodium thin films were deposited between 200 and 220 °C, whereas palladium thin films were deposited between 180 and 220 °C. A precisely controlled low ozone concentration of 1.22 g m⁻³ was applied to prevent the oxidation of the noble metallic film, and to ensure fast growth rates of 0.42 Å per cycle for Rh, and 0.22 Å per cycle for Pd. When low-concentration ozone was applied to react with ligand, no excess ozone was available to oxidize the metal products. The surfaces of deposited films obtained the RMS roughness values of 0.30 nm for Rh and 0.13 nm for Pd films. The resistivities of 18 nm Rh and 22 nm Pd thin films were 17 μΩ cm and 63 μΩ cm.

Rh and Pd metallic thin films were fabricated by atomic layer deposition using Rh(acac)₃ and Pd(hfac)₂ precursors, and only low-concentration ozone as co-reactant.

Catalytic properties of supramolecular polymetallated porphyrins

Supramolecular polymetallated pyridylporphyrins have been specially designed for exploring the binding and synergism between the macrocyclic system and the peripheral metal complexes. Their chemistry has been reviewed, focusing on the outstanding behavior in solution or as thin organized films generated with several nanomaterials, for application as molecular devices and in energy conversion processes.

Advances in Group 10 Transition-Metal-Catalyzed Arene Alkylation and Alkenylation

On a large scale, the dominant method to produce alkyl arenes has been arene alkylation from arenes and olefins using acid-based catalysis. The addition of arene C-H bonds across olefin C═C bonds catalyzed by transition-metal complexes through C-H activation and olefin insertion into metal-aryl bonds provides an alternative approach with potential advantages. This Perspective presents recent developments of olefin hydroarylation and oxidative olefin hydroarylation catalyzed by molecular complexes based on group 10 transition metals (Ni, Pd, Pt). Emphasis is placed on comparisons between Pt catalysts and other group 10 metal catalysts as well as Ru, Ir, and Rh catalysts.

A tailored multi-functional catalyst for ultra-efficient styrene production under a cyclic redox scheme

Styrene is an important commodity chemical that is highly energy and CO2 intensive to produce. We report a redox oxidative dehydrogenation (redox-ODH) strategy to efficiently produce styrene. Facilitated by a multifunctional (Ca/Mn)1-xO@KFeO2 core-shell redox catalyst which acts as (i) a heterogeneous catalyst, (ii) an oxygen separation agent, and (iii) a selective hydrogen combustion material, redox-ODH auto-thermally converts ethylbenzene to styrene with up to 97% single-pass conversion and >94% selectivity. This represents a 72% yield increase compared to commercial dehydrogenation on a relative basis, leading to 82% energy savings and 79% CO2 emission reduction. The redox catalyst is composed of a catalytically active KFeO2 shell and a (Ca/Mn)1-xO core for reversible lattice oxygen storage and donation. The lattice oxygen donation from (Ca/Mn)1-xO sacrificially stabilizes Fe3+ in the shell to maintain high catalytic activity and coke resistance. From a practical standpoint, the redox catalyst exhibits excellent long-term performance under industrially compatible conditions.

Olefin Hydroarylation Catalyzed by a Single-Component Cobalt(-I) Complex

A single-component Co(-I) catalyst, [(PPh₃)₃Co(N₂)]Li(THF)₃, has been developed for olefin hydroarylations with (N-aryl)aryl imine substrates. More than 40 examples were examined under mild reaction conditions to afford the desired alkyl-arene product in good to excellent yields. Catalysis occurs in a regioselective manner to afford exclusively branched products with styrene-derived substrates or linear products for aliphatic olefins. Electron-withdrawing functional groups (e.g., -F, -CF₃, and -CO₂Me) were tolerated under the reaction conditions.

Highly dispersed Pt nanoparticles in the Cs-modified X zeolite with enhancement for toluene side-chain alkylation with methanol

Modification of Cs/X with highly dispersed Pt NPs improved the activity and durability in the side-chain alkylation of toluene.

Selective Dealkenylative Functionalization of Styrenes via C-C Bond Cleavage

As a readily available feedstock, styrene with about 25 million tons of global annual production serves as an important building block and organic synthon for the synthesis of fine chemicals, polystyrene plastics, and elastomers. Thus, in the past decades, many direct transformations of this costless styrene feedstock were disclosed for the preparation of high-value chemicals, which to date, generally performed on the functionalization of styrenes through the allylic C-H bond, C(sp²)-H bond, or the C=C double bond cleavage. However, the dealkenylative functionalization of styrenes via the direct C-C single bond cleavage is so far challenging and still unknown. Herein, we report the novel and efficient C-C amination and hydroxylation reactions of styrenes for the synthesis of valuable aryl amines and phenols via the site-selective C(Ar)-C(alkenyl) single bond cleavage. This chemistry unlocks the new transformation and application of the styrene feedstock and provides an efficient protocol for the late-stage modification of substituted styrenes with the site-directed dealkenylative amination and hydroxylation.

Combined Cyanoborylation, C-H Activation Strategy for Styrene Functionalization

A one-pot multicomponent copper-catalyzed protocol for borylation/ortho-cyanation of styrene derivatives followed by a Suzuki-Miyaura coupling provides a platform to explore the factors that control the selectivity between distal or proximal functionalization of arenes. The development of divergent nitrile-directed C-H functionalization (acetoxylation, pivalation, and methoxylation) offers an effective approach to rapidly increase synthetic complexity. Finally, the development of a mild reductive decyanation allows a traceless method to access functionalized biaryl motifs.

Advances in Rhodium-Catalyzed Oxidative Arene Alkenylation

ConspectusAlkyl and alkenyl arenes are of substantial value in both large-scale and fine chemical processes. Billions of pounds of alkyl and alkenyl arenes are produced annually. Historically, the dominant method for synthesis of alkyl arenes is acid-catalyzed arene alkylation, and alkenyl arenes are often synthesized in a subsequent dehydrogenation step. But these methods have limitations that result from the catalytic mechanism including (1) common polyalkylation, which requires an energy intensive transalkylation process, (2) quantitative selectivity for Markovnikov products for arene alkylation using α-olefins, (3) for substituted arenes, regioselectivity that is dictated by the electronic character of the arene substituents, (4) inability to form alkenyl arenes in a single process, and (5) commonly observed slow reactivity with electron-deficient arenes. Transition-metal-catalyzed aryl-carbon coupling reactions can produce alkyl or alkenyl arenes from aryl halides. However, these reactions often generate halogenated waste and typically require a stoichiometric amount of metal-containing transmetalation reagent. Transition-metal-catalyzed arene alkylation or alkenylation that involves arene C-H activation and olefin insertion into metal-aryl bonds provides a potential alternative method to prepare alkyl or alkenylation arenes. Such reactions can circumvent carbocationic intermediates and, as a result, can overcome some of the limitations mentioned above. In particular, controlling the regioselectivity of the insertion of α-olefins into metal-aryl bonds provides a strategy to selectively synthesize anti-Markovnikov products. But, previously reported catalysts often show limited longevity and low selectivity for anti-Markovnikov products.In this Account, we present recent developments in single-step arene alkenylation using Rh catalyst precursors. The reactions are successful for unactivated hydrocarbons and exhibit unique selectivity. The catalytic production of alkenyl arenes operates via Rh-mediated aromatic C-H activation, which likely occurs by a concerted metalation-deprotonation mechanism, olefin insertion into a Rh-aryl bond, β-hydride elimination from the resulting Rh-hydrocarbon product, and net dissociation of alkenyl arene with formation of a Rh hydride. Reaction of the Rh hydride with Cu(II) oxidant completes the catalytic cycle. Although Rh nanoparticles can be formed under some conditions, mechanistic studies have revealed that soluble Rh species are likely responsible for the catalysis. These Rh catalyst precursors achieve high turnovers with >10,000 catalytic turnovers observed in some cases. Under anaerobic conditions, Cu(II) carboxylates are used as the oxidant. In some cases, aerobic recycling of Cu(II) oxidant has been demonstrated. Hence, the Rh arene alkenylation catalysis bears some similarities to Pd-catalyzed olefin oxidation (i.e., the Wacker-Hoechst process). The Rh-catalyzed arene alkenylation is compatible with some electron-deficient arenes, and they are selective for anti-Markovnikov products when using substituted olefins. Finally, when using monosubstituted arenes, consistent with a metal-mediated C-H activation process, Rh-catalyzed alkenylation of substituted arenes shows selectivity for meta- and para-alkenylation products.

HBF4- and AgBF4-Catalyzed ortho-Alkylation of Diarylamines and Phenols

A silver-tetrafluoroborate- or HBF4-catalyzed ortho-alkylation reaction of phenols and diarylamines with styrenes has been explored. A broad substrate scope is presented as well as mechanistic experiments and discussion.

Stepwise Reduction at Magnesium and Beryllium: Cooperative Effects of Carbenes with Redox Non-Innocent α-Diimines

In the past two decades, the organometallic chemistry of the alkaline earth elements has experienced a renaissance due in part to developments in ligand stabilization strategies. In order to expand the scope of redox chemistry known for magnesium and beryllium, we have synthesized a set of reduced magnesium and beryllium complexes and compared their resulting structural and electronic properties. The carbene-coordinated alkaline earth-halides, (^Et2CAAC)MgBr₂ (1), (SIPr)MgBr₂ (2), (^Et2CAAC)BeCl₂ (3), and (SIPr)BeCl₂ (4) [^Et2CAAC = diethyl cyclic(alkyl)(amino) carbene; SIPr = 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazole-2-ylidene] were combined with an α-diimine [2,2-bipyridine (bpy) or bis(2,6-diisopropylphenyl)-1,4-diazabutadiene (^DippDAB)] and the appropriate stoichiometric amount of potassium graphite to form singly- and doubly-reduced compounds (^Et2CAAC)MgBr(^DippDAB) (5), (^Et2CAAC)MgBr(bpy) (6), (^Et2CAAC)Mg(^DippDAB) (7), (^Et2CAAC)Be(bpy) (8), and (SIPr)Be(bpy) (9). The doubly-reduced compounds 7-9 exhibit substantial π-bonding interactions across the diimine core, metal center, and π-acidic carbene. Each complex was fully characterized by UV-vis, FT-IR, X-ray crystallography, ¹H, ¹³C, and ⁹Be NMR, or EPR where applicable. We use these compounds to highlight the differences in the organometallic chemistry of the lightest alkaline earth metals, magnesium and beryllium, in an otherwise identical chemical environment.

Side-chain alkylation of toluene with methanol to produce styrene: an overview

Styrene is a key building-block chemical for the production of polymers with significant application value.

Regioselective Formal [4 + 2] Cycloadditions of Enaminones with Diazocarbonyls through RhIII-Catalyzed C-H Bond Functionalization

A regioselective formal [4 + 2] cycloaddition for the assembly of highly functionalized benzene rings was successfully developed. In this reaction, olefinic C-H bond functionalization/cyclization cascade reaction followed by rearomatization led to the desired molecules in one step under mild reaction conditions. This protocol also displays a broad substrate scope and good tolerance to a wide range of functional groups. Additionally, the potential utility for the synthesis of highly conjugated polybenzenes and diversification of natural products was also demonstrated.