Nanoscale Chemical Diversity of Coke Deposits on Nanoprinted Metal Catalysts Visualized by Tip-Enhanced Raman Spectroscopy

Coke formation is the prime cause of catalyst deactivation, where undesired carbon wastes block the catalyst surface and hinder further reaction in a broad gamut of industrial chemical processes. Yet, the origins of coke formation and their distribution across the catalyst remain elusive, obstructing the design of coke-resistant catalysts. Here, the first-time application of tip-enhanced Raman spectroscopy (TERS) is demonstrated as a nanoscale chemical probe to localize and identify coke deposits on a post-mortem metal nanocatalyst. Monitoring coke at the nanoscale circumvents bulk averaging and reveals the local nature of coke with unmatched detail. The nature of coke is chemically diverse and ranges from nanocrystalline graphite to disordered and polymeric coke, even on a single nanoscale location of a top-down nanoprinted SiO2 -supported Pt catalyst. Surprisingly, not all Pt is an equal producer of coke, where clear isolated coke "hotspots" are present non-homogeneously on Pt which generate large amounts of disordered coke. After their formation, coke shifts to the support and undergoes long-range transport on the surrounding SiO2 surface, where it becomes more graphitic. The presented results provide novel guidelines to selectively free-up the coked metal surface at more mild rejuvenation conditions, thus securing the long-term catalyst stability.

Mesoporous Silica (MCM-41) Containing Dispersed Palladium Nanoparticles as Catalyst for Dehydrogenation, Methanolysis, and Reduction Reactions

Generating highly dispersed metal NPs of the desired size on surfaces such as porous silica is challenging due to wettability issues. Here, we report highly active and well-dispersed Pd incorporated mesoporous MCM-41 (Pd@MCM) using a facile impregnation via a molecular approach based on hydrogen bonding interaction of a palladium β-diketone complex with surface silanol groups of mesoporous silica. Controlled thermal treatment of so obtained materials in air, argon, and hydrogen provided the catalysts characterized by electron microscopy, nitrogen physisorption, X-ray diffraction and spectroscopy. Gratifyingly, our catalyst provided the lowest ever activation energy (14.3 kJ/mol) reported in literature for dehydrogenation of NaBH4 . Moreover, the rate constant (7×10-3  s-1 ) for the reduction of 4-nitrophenol outperformed the activity of commercial Pd/C (4×10-3  s-1 ) and Pd/Al2 O3 (5×10-3  s-1 ) catalysts.

Mechanistic understanding and the rational design of a SiO2@CD catalyst for selective protection of L-lysine

The mechanism of the selective protection of L-lysine mediated by β-cyclodextrin (β-CD) was investigated by preliminary experiments, including the reaction efficiency influenced by different reaction conditions, and the existence of (1a·CD)' and 1a·CD·2a was evidenced by ESI-MS and 2D Rotating Frame Overhauser Effect Spectroscopy (ROESY) analysis. The results indicated that the formation of (1a·CD)' is critical for the product selectivity and the further formation of the ternary complex 1·CD·2 is responsible for the reaction efficiency. Thus, the yields and selectivity were significantly influenced by the structure, size and reactivity of the reactants. During the mechanistic investigations, we realized that the formation of the product and the β-CD complex at the final stage of the reaction would cause difficulty in product purification by a previously reported homogeneous method. In light of this understanding, an efficient and practical protocol for selective protection of L-lys based on a heterogeneous catalyst SiO₂@CD was developed. The use of the SiO₂ immobilized β-CD catalyst prevented the formation of the "capped" products by controlling the spatial rearrangement of β-CDs on solid supports, which represents a considerable synthetic improvement over the tedious and wasteful organic solvent extraction for product purification.

Shape-controllable and kinetically miscible Copper-Palladium bimetallic nanozymes with enhanced Fenton-like performance for biocatalysis

Bimetallic nanozymes have been emerging as essential catalysts due to their unique physicochemical properties from the monometallics. However, the access to optimize catalytic performance is often limited by the thermodynamic immiscibility and also heterogeneity. Thus, we present a one-step coreduction strategy to prepare the miscible Cu-Pd bimetallic nanozymes with controllable shape and homogeneously alloyed structure. The homogeneity is systematically explored and luckily, the homogeneous introduction of Cu successfully endows Cu-Pd bimetallic nanozymes with enhanced Fenton-like efficiency. Density functional theory (DFT) theoretical calculation reveals that Cu-Pd bimetallic nanozymes exhibit smaller d-band center compared with Pd nanozymes. Easier adsorption of H2O2 molecular contributed by the electronic structure of Cu significantly accelerate the catalytic process together with the strong repulsive interaction between H atom and Pd atom. In vitro cytotoxicity and intracellular ROS generation performance reveal the potential for in vivo biocatalysis. The strategy to construct kinetically miscible Cu-Pd bimetallic nanozymes will guide the development of bimetallic catalysts with excellent Fenton-like efficiency for biocatalytic nanomedicine.

Atom probe specimen preparation methods for nanoparticles

Revealing the position of materials with chemical selectivity at atomic scale within functional nanoparticles is essential to understand and control their performance and cutting-edge atom probe tomography is a powerful tool to undertake this task. In this paper, we demonstrate three effective methods to prepare the needle-shaped specimens required for atom probe tomography measurements from nanoparticles of different sizes and provide examples of how atom probe can be used to provide data that is critical to their functionality. Samples measured include lithium-ion batteries (LIBs) cathode nanoparticles (300 - 500 nm), nickel-doped silicon dioxide (Ni@SiO2) catalytic nanoparticles (100 - 200 nm) and tin-doped copper (Sn@Cu) catalytic nanoparticles (<100 nm). The methods presented can be used to address the ongoing challenge of specimen preparation from particle samples for atom probe measurement, and they provide high quality data. These methods will broaden the application of atom probe tomography and will provide alternative option for researchers to assess the performance/structure of their functional nanomaterials.

Monolayer Support Control and Precise Colloidal Nanocrystals Demonstrate Metal-Support Interactions in Heterogeneous Catalysts

Electronic and geometric interactions between active and support phases are critical in determining the activity of heterogeneous catalysts, but metal-support interactions are challenging to study. Here, it is demonstrated how the combination of the monolayer-controlled formation using atomic layer deposition (ALD) and colloidal nanocrystal synthesis methods leads to catalysts with sub-nanometer precision of active and support phases, thus allowing for the study of the metal-support interactions in detail. The use of this approach in developing a fundamental understanding of support effects in Pd-catalyzed methane combustion is demonstrated. Uniform Pd nanocrystals are deposited onto Al₂ O₃ /SiO₂ spherical supports prepared with control over morphology and Al₂ O₃ layer thicknesses ranging from sub-monolayer to a ≈4 nm thick uniform coating. Dramatic changes in catalytic activity depending on the coverage and structure of Al₂ O₃ situated at the Pd/Al₂ O₃ interface are observed, with even a single monolayer of alumina contributing an order of magnitude increase in reaction rate. By building the Pd/Al₂ O₃ interface up layer-by-layer and using uniform Pd nanocrystals, this work demonstrates the importance of controlled and tunable materials in determining metal-support interactions and catalyst activity.

Single-Site vs. Cluster Catalysis in High Temperature Oxidations

The behavior of single Pt atoms and small Pt clusters was investigated for high-temperature oxidations. The high stability of these molecular sites in CHA is a key to intrinsic structure-performance descriptions of elemental steps such as O₂ dissociation, and subsequent oxidation catalysis. Subtle changes in the atomic structure of Pt are responsible for drastic changes in performance driven by specific gas/metal/support interactions. Whereas single Pt atoms and Pt clusters (> ca. 1 nm) are unable to activate, scramble, and desorb two O₂ molecules at moderate T (200 °C), clusters <1 nm do so catalytically, but undergo oxidative fragmentation. Oxidation of alkanes at high T is attributed to stable single Pt atoms, and the C-H cleavage is inferred to be rate-determining and less sensitive to changes in metal nuclearity compared to its effect on O₂ scrambling. In contrast, when combustion involves CO, catalysis is dominated by metal clusters, not single Pt atoms.

Size-controlled nanocrystals reveal spatial dependence and severity of nanoparticle coalescence and Ostwald ripening in sintering phenomena

A major aim in the synthesis of nanomaterials is the development of stable materials for high-temperature applications. Although the thermal coarsening of small and active nanocrystals into less active aggregates is universal in material deactivation, the atomic mechanisms governing nanocrystal growth remain elusive. By utilizing colloidally synthesized Pd/SiO2 powder nanocomposites with controlled nanocrystal sizes and spatial arrangements, we unravel the competing contributions of particle coalescence and atomic ripening processes in nanocrystal growth. Through the study of size-controlled nanocrystals, we can uniquely identify the presence of either nanocrystal dimers or smaller nanoclusters, which indicate the relative contributions of these two processes. By controlling and tracking the nanocrystal density, we demonstrate the spatial dependence of nanocrystal coalescence and the spatial independence of Ostwald (atomic) ripening. Overall, we prove that the most significant loss of the nanocrystal surface area is due to high-temperature atomic ripening. This observation is in quantitative agreement with changes in the nanocrystal density produced by simulations of atomic exchange. Using well-defined colloidal materials, we extend our analysis to explain the unusual high-temperature stability of Au/SiO2 materials up to 800 °C.

Silica–sulfuric acid and alumina–sulfuric acid: versatile supported Brønsted acid catalysts

–SO3H functionalized silica and alumina have emerged as efficient and eco-compatible heterogeneous solid acid catalysts for the construction of various important molecular skeletons.

Heterogeneous catalysis by ultra-small bimetallic nanoparticles surpassing homogeneous catalysis for carbon-carbon bond forming reactions

Palladium catalyzed cross-coupling reactions represent a significant advancement in contemporary organic synthesis as these reactions are of strategic importance in the area of pharmaceutical drug discovery and development. Supported palladium-based catalysts are highly sought-after in carbon-carbon bond forming catalytic processes to ensure catalyst recovery and reuse while preventing product contamination. This paper reports the development of heterogeneous Pd-based bimetallic catalysts supported on fumed silica that have high activity and selectivity matching those of homogeneous catalysts, eliminating the catalyst's leaching and sintering and allowing efficient recycling of the catalysts. Palladium and base metal (Cu, Ni or Co) contents of less than 1.0 wt% loading are deposited on a mesoporous fumed silica support (surface area SABET = 350 m2 g-1) using strong electrostatic adsorption (SEA) yielding homogeneously alloyed nanoparticles with an average size of 1.3 nm. All bimetallic catalysts were found to be highly active toward Suzuki cross-coupling (SCC) reactions with superior activity and stability for the CuPd/SiO2 catalyst. A low CuPd/SiO2 loading (Pd: 0.3 mol%) completes the conversion of bromobenzene and phenylboronic acid to biphenyl in 30 minutes under ambient conditions in water/ethanol solvent. In contrast, monometallic Pd/SiO2 (Pd: 0.3 mol%) completes the same reaction in three hours under the same conditions. The combination of Pd with the base metals helps in retaining the Pd0 status by charge donation from the base metals to Pd, thus lowering the activation energy of the aryl halide oxidative addition step. Along with its exceptional activity, CuPd/SiO2 exhibits excellent recycling performance with a turnover frequency (TOF) of 280 000 h-1 under microwave reaction conditions at 60 °C. Our study demonstrates that SEA is an excellent synthetic strategy for depositing ultra-small Pd-based bimetallic nanoparticles on porous silica for SCC. This avenue not only provides highly active and sintering-resistant catalysts but also significantly lowers Pd contents in the catalysts without compromising catalytic activity, making the catalysts very practical for large-scale applications.

Hollow Silica Particles: Recent Progress and Future Perspectives

Hollow silica particles (or mesoporous hollow silica particles) are sought after for applications across several fields, including drug delivery, battery anodes, catalysis, thermal insulation, and functional coatings. Significant progress has been made in hollow silica particle synthesis and several new methods are being explored to use these particles in real-world applications. This review article presents a brief and critical discussion of synthesis strategies, characterization techniques, and current and possible future applications of these particles.

Metal-Support Interactions in CeO2- and SiO2-Supported Cobalt Catalysts: Effect of Support Morphology, Reducibility, and Interfacial Configuration

With the increasing demand for highly efficient and durable catalysts, researchers have been doing extensive research to engineer the shape, size, and even phase (e.g., hcp or fcc Co) of individual catalyst nanoparticles, as well as the interface structure between the catalyst and support. In this work, cobalt oxides were deposited on ceria with rod-like morphology (CeO₂NR) and cube-like morphology (CeO₂NC) and silica with sphere-like morphology (SiO₂NS) via a precipitation-deposition method to investigate the effects of support morphology, surface defects, support reducibility, and the metal-support interactions on redox and catalytic properties. XRD, Raman, XPS, BET, H₂-TPR, O₂-TPD, CO-TPD, TEM, and TPR/TPO cycling measurements have been mainly employed for catalysts characterization. Compared with CeO₂NC and SiO₂NS supports, as well as CeO₂NC- and SiO₂NS-supported cobalt catalysts, CeO₂NR counterparts exhibited enhanced reducibility and CO oxidation performance at a lower temperature. Both the apparent activation energy and CO conversion demonstrated the following catalytic activity order: 10 wt % CoO _x/CeO₂NR > 10 wt % CoO _x/CeO₂NC > 10 wt % CoO _x/SiO₂NS. These results showed a strong support-dependent reducibility, CO oxidation, and redox cycling activity/stability of the as-prepared catalysts. Moreover, the significantly enhanced catalytic CO oxidation of the 10 wt % CoO _x/CeO₂NR catalyst indicated the vital role of CeO₂NR support with rich surface oxygen vacancies, superior oxygen storage capacity and mobility, and excellent adsorption/desorption behavior of CO and O₂ species.

The Support Effects on the Direct Conversion of Syngas to Higher Alcohol Synthesis over Copper-Based Catalysts

The types of supports employed profoundly influence the physicochemical properties and performances of as-prepared catalysts in almost all catalytic systems. Herein, Cu catalysts, with different supports (SiO2, Al2O3), were prepared by a facile impregnation method and used for the direct synthesis of higher alcohols from CO hydrogenation. The prepared catalysts were characterized using multiple techniques, such as X-ray diffraction (XRD), N2 sorption, H2-temperature-programmed reduction (H2-TPR), temperature-programmed desorption of ammonia (NH3-TPD), X-ray photoelectron spectroscopy (XPS) and in situ Fourier-transform infrared spectroscopy (FTIR), etc. Compared to the Cu/Al2O3 catalyst, the Cu/SiO2 catalyst easily promoted the formation of a higher amount of C1 oxygenate species on the surface, which is closely related to the formation of higher alcohols. Simultaneously, the Cu/Al2O3 and Cu/SiO2 catalysts showed obvious differences in the CO conversion, alcohol distribution, and CO2 selectivity, which were probably originated from differences in the structural and physicochemical properties, such as the types of copper species, the reduction behaviors, acidity, and electronic properties. Besides, it was also found that the gap in performances in two kinds of catalysts with the different supports could be narrowed by the addition of potassium because of its neutralization to surface acidy of Al2O3 and the creation of new basic sites, as well as the alteration of electronic properties.

Clean chlorination of silica surfaces by a single-site substitution approach

A chlorination method for the selective substitution of well-defined isolated silanol groups of the silica surface has been developed using the catalytic Appel reaction. Spectroscopic analysis, complemented by elemental microanalysis studies, reveals that a quantitative chlorination could be achieved with highly dehydroxylated silica materials that exclusively possess non-hydrogen bonded silanol groups. The employed method did not leave any carbon or phosphorus residue on the silica surface and can be regarded as a promising tool for the future functionalization of metal oxide surfaces.

An integrated immobilization strategy manipulates dual active centers to boost enantioselective tandem reactions

A bifunctional catalyst assembled by dual species manipulation presents high efficiency in Suzuki coupling-asymmetric transfer hydrogenation tandem reactions.

Synthesis of ultrasmall, homogeneously alloyed, bimetallic nanoparticles on silica supports

Supported nanoparticles containing more than one metal have a variety of applications in sensing, catalysis, and biomedicine. Common synthesis techniques for this type of material often result in large, unalloyed nanoparticles that lack the interactions between the two metals that give the particles their desired characteristics. We demonstrate a relatively simple, effective, generalizable method to produce highly dispersed, well-alloyed bimetallic nanoparticles. Ten permutations of noble and base metals (platinum, palladium, copper, nickel, and cobalt) were synthesized with average particle sizes from 0.9 to 1.4 nanometers, with tight size distributions. High-resolution imaging and x-ray analysis confirmed the homogeneity of alloying in these ultrasmall nanoparticles.

Nanostructured manganese oxide on silica aerogel: a new catalyst toward water oxidation

Herein we report on the synthesis and characterization of nano-sized Mn oxide/silica aerogel with low density as a good catalyst toward water oxidation. The composite was synthesized by a simple and low-cost hydrothermal procedure. In the next step, we studied the composite in the presence of cerium(IV) ammonium nitrate and photo-produced Ru(bpy) ₃³⁺ as a water-oxidizing catalyst. The low-density composite is a good Mn-based catalyst with turnover frequencies of ~0.3 and 0.5 (mmol O₂/(mol Mn·s)) in the presence of Ru(bpy) ₃³⁺ and cerium(IV) ammonium nitrate, respectively. In addition to the water-oxidizing activities of the composite under different conditions, its self-healing reaction in the presence of cerium(IV) ammonium nitrate was also studied.

Transmission and fluorescence X-ray absorption spectroscopy cell/flow reactor for powder samples under vacuum or in reactive atmospheres

X-ray absorption spectroscopy is an element-specific technique for probing the local atomic-scale environment around an absorber atom. It is widely used to investigate the structures of liquids and solids, being especially valuable for characterization of solid-supported catalysts. Reported cell designs are limited in capabilities-to fluorescence or transmission and to static or flowing atmospheres, or to vacuum. Our goal was to design a robust and widely applicable cell for catalyst characterizations under all these conditions-to allow tracking of changes during genesis and during operation, both under vacuum and in reactive atmospheres. Herein, we report the design of such a cell and a demonstration of its operation both with a sample under dynamic vacuum and in the presence of gases flowing at temperatures up to 300 °C, showing data obtained with both fluorescence and transmission detection. The cell allows more flexibility in catalyst characterization than any reported.

Preparation and characterization of a highly dispersed and stable Ni catalyst with a microporous nanosilica support

Microporous Stöber silica was synthesized by controlling the post-drying conditions. Using the silica as support, a highly dispersed Ni catalyst was successfully prepared by a simple impregnation method.