RETRACTED: Asymmetric remote C-H borylation of aliphatic amides and esters with a modular iridium catalyst

Enantioselective Ni-Catalyzed 1,2-Borylalkynylation of Unactivated Alkenes

Enantioselective three-component difunctionalization of alkenes with boron reagents represents an attractive strategy for assembling three-dimensional chiral organoboron compounds. However, regio- and enantiocontrol comprise the pivot challenges in these transformations, which predominantly require the use of activated conjugated alkenes. Herein, by utilizing various carbonyl directing groups, including amides, sulfinamides, ketones, and esters, we succeed in realizing a nickel-catalyzed 1,2-borylalkynylation of unactivated alkenes to enable the simultaneous incorporation of a boron entity and an sp-fragment across the double bond. The products contain boryl, alkynyl, and carbonyl functional groups with orthogonal synthetic reactivities, offering three handles for further derivatization to access valuable intermediates. The utility of this ligand-enabled asymmetric protocol has been highlighted through the late-stage decoration of drug-relevant molecules.

Electrochemical recycling of homogeneous catalysts

Homogeneous catalysts have rapid kinetics and keen reaction selectivity. However, their widespread use for industrial catalysis has remained limited because of challenges in reusability. Here, we propose a redox-mediated electrochemical approach for catalyst recycling using metallopolymer-functionalized electrodes for binding and release. The redox platform was investigated for the separation of key platinum and palladium homogeneous catalysts used in organic synthesis and industrial chemical manufacturing. Noble metal catalysts for hydrosilylation, silane etherification, Suzuki cross-coupling, and Wacker oxidation were recycled electrochemically. The redox electrodes demonstrated high sorption uptake for platinum-based catalysts (Q_max up to 200 milligrams of platinum per gram of adsorbent) from product mixtures, with up to 99.5% recovery, while retaining full catalytic activity over multiple cycles. The combination of mechanistic studies and electronic structure calculations indicate that selective interactions with anionic intermediates during the catalytic cycle played a key role in the separations. Last, continuous flow cell studies support the scalability and favorable technoeconomics of electrochemical recycling.

Recent Trends in Group 9 Catalyzed C–H Borylation Reactions: Different Strategies To Control Site-, Regio-, and Stereoselectivity

Organoboron compounds continue contributing substantially to advances in organic chemistry with their increasing role as both synthetic intermediates and target compounds for medicinal chemistry. Particularly attractive methods for their synthesis are based on the direct borylation of C–H bonds of available starting materials since no additional pre-functionalization steps are required. However, due to the high abundance of C–H bonds with similar reactivity in organic molecules, synthetically useful C–H borylation protocols demand sophisticated strategies to achieve high regio- and stereoselectivity. For this purpose, selective transition-metal-based catalysts have been developed, with group 9 centered catalysts being among the most commonly utilized. Recently, a multitude of diverse strategies has been developed to push the boundaries of C–H borylation reactions with respect to their regio- and enantioselectivity. Herein, we provide an overview of approaches for the C–H borylation of arenes, alkenes, and alkanes based on group 9 centered catalysts with a focus on the recent literature. Lastly, an outlook is given to assess the future potential of the field.

1 Introduction

1.1 Mechanistic Considerations

1.2 Selectivity Issues in C–H Borylation

1.3 Different Modes of Action Employing Directing Group Strategies in C–H Borylation

1.4 Scope and Aim of this Short Review

2 Trends in C–H Borylation Reactions

2.1 Photoinduced Catalysis

2.2 Transfer C–H Borylation

2.3 Lewis Acid Mediated C–H Borylation

2.4 Directed Metalation

2.5 Miscellaneous C–H Borylation Reactions

2.6 Electrostatic Interactions

2.7 Hydrogen Bonding

3 Conclusion and Outlook

Metal-catalysed C-H bond activation and borylation

Transition metal-catalysed direct borylation of hydrocarbons via C-H bond activation has received a remarkable level of attention as a popular reaction in the synthesis of organoboron compounds owing to their synthetic versatility. While controlling the site-selectivity was one of the most challenging issues in these C-H borylation reactions, enormous efforts of several research groups proved instrumental in dealing with selectivity issues that presently reached an impressive level for both proximal and distal C-H bond borylation reactions. For example, in the case of ortho C-H bond borylation reactions, innovative methodologies have been developed either by the modification of the directing groups attached with the substrates or by creating new catalytic systems via the design of new ligand frameworks. Whereas meta and para selective C-H borylations remained a formidable challenge, numerous innovative concepts have been developed within a very short period of time by the development of new catalytic systems with the employment of various noncovalent interactions. Moreover, significant advancements have occurred for aliphatic C(sp³)-H borylations as well as enantioselective borylations. In this review article, we aim to discuss and summarize the different approaches and findings related to the development of directed proximal ortho, distal meta/para, aliphatic (racemic and enantioselective) borylation reactions since 2014. Additionally, considering the C-H borylation reaction as one of the most important mainstream reactions, various applications of this C-H borylation reaction toward the synthesis of natural products, therapeutics, and applications in materials chemistry will be summarized in the last part of this review article.

Transition Metal Catalysis Controlled by Hydrogen Bonding in the Second Coordination Sphere

Transition metal catalysis is of utmost importance for the development of sustainable processes in academia and industry. The activity and selectivity of metal complexes are typically the result of the interplay between ligand and metal properties. As the ligand can be chemically altered, a large research focus has been on ligand development. More recently, it has been recognized that further control over activity and selectivity can be achieved by using the "second coordination sphere", which can be seen as the region beyond the direct coordination sphere of the metal center. Hydrogen bonds appear to be very useful interactions in this context as they typically have sufficient strength and directionality to exert control of the second coordination sphere, yet hydrogen bonds are typically very dynamic, allowing fast turnover. In this review we have highlighted several key features of hydrogen bonding interactions and have summarized the use of hydrogen bonding to program the second coordination sphere. Such control can be achieved by bridging two ligands that are coordinated to a metal center to effectively lead to supramolecular bidentate ligands. In addition, hydrogen bonding can be used to preorganize a substrate that is coordinated to the metal center. Both strategies lead to catalysts with superior properties in a variety of metal catalyzed transformations, including (asymmetric) hydrogenation, hydroformylation, C-H activation, oxidation, radical-type transformations, and photochemical reactions.

Catalysis with Diboron(4)/Pyridine: Application to the Broad-Scope [3 + 2] Cycloaddition of Cyclopropanes and Alkenes

In contrast to the extensive but non-recyclable use of tetraalkoxydiboron(4) compounds as stoichiometric reagents in diverse reactions, this article reports an atom-economical reaction using a commercial diboron(4) as the catalyst. The key to success was designing a catalytic cycle for radical [3 + 2] cycloaddition involving a pyridine cocatalyst to generate from the diboron(4) catalyst and reversibly mediate the transfer of boronyl radicals. In comparison with known [3 + 2] cycloaddition with transition metal-based catalysts, the current reaction features not only metal-free conditions, inexpensive and stable catalysts, and simple operation but also remarkably broadened substrate scope. In particular, previously unusable cyclopropyl ketones without an activating group and/or alkenes with 1,2-disubstitution and 1,1,2-trisubstitution patterns were successfully used for the first time. Consequently, challenging cyclopentane compounds with various levels of substitution (65 examples, 57 new products, up to six substituents at all five ring atoms) were readily prepared in generally high to excellent yield and diastereoselectivity. The reaction was also successfully applied in concise formal synthesis of an anti-obesity drug and building natural product-like complex bridged or spirocyclic compounds. Mechanistic experiments and computational investigation support the proposed radical relay catalysis featuring a pyridine-assisted boronyl radical catalyst. Overall, this work demonstrates the first approach to use tetraalkoxydiboron(4) compounds as catalysts and may lead to the development of new, green, and efficient transition metal-like boron-catalyzed organic reactions.

Iridium-Catalyzed Enantioselective C(sp3 )-H Borylation of Aminocyclopropanes

Transition-metal-catalyzed regio- and stereo-controllable C-H functionalization remains a formidable challenge in asymmetric catalysis. Herein, we disclose the first example of iridium-catalyzed C(sp³ )-H borylation of aminocyclopropanes by using simple imides as weakly coordinating directing groups under mild reaction conditions. The reaction proceeded via a six-membered iridacycle, affording a vast range of chiral aminocyclopropyl boronates. The current method features a broad spectrum of functional groups (36 examples) and high enantioselectivities (up to 99 %). We also demonstrated the synthetic utility by a preparative scale C-H borylation, C-B bond transformations, and conversion of the directing group.

Hydropyridylation of α,β-Unsaturated Esters through Electroreduction of 4-Cyanopyridine

A mild and highly efficient method for the hydropyridylation of α,β-unsaturated esters has been developed. This protocol provides the products smoothly with a wide substrate scope in an undivided cell under ambient conditions. Moreover, studies showed that the scope could be extended to other unsaturated compounds, including enones and aldehydes.

Catalyst Engineering through Heterobidentate (N–X-Type) Ligand Design for Iridium-Catalyzed Borylation

Iridium-catalyzed C–H activation and borylation reactions operate under mild conditions that enable easy and atom-economical installation of the versatile boronate ester group in (het)arenes and alkanes. The standard catalytic system for iridium-catalyzed borylation uses [Ir(cod)(OMe)]2 as a precatalyst, a bipyridine type ligand, and B2pin2 or HBpin as the borylating agent. Initially, a bipyridine-ligated trisboryl–iridium complex is generated that enables the borylation reaction and the regioselectivity is mainly governed by the sterics of substituents present on the ring. As a result, monosubstituted and 1,2-disubstituted arenes give mixtures of isomers. Significant efforts by several research groups have overcome the selectivity issue for directed proximal C–H borylation by introducing a directing group and newly developed ligands. This short review aims to summarize recent elegant discoveries in directed C(sp2)–H and C(sp3)–H borylation by using heterobidentate ligand (P/N–Si, N–B, and N–C) coordinated iridium catalysts.

1 Introduction

2 Iridium-Catalyzed Directed C–H Borylation of C(sp2)–H Bonds

3 Iridium-Catalyzed Directed C–H Borylation of C(sp3)–H Bonds

4 Conclusions

Amide directed iridium C(sp3)-H borylation catalysis with high N-methyl selectivity

A bidentate monoanionic ligand system was developed to enable iridium catalyzed C(sp³)-H activation borylation of N-methyl amides. Borylated amides were obtained in moderate to good isolated yields, and exclusive mono-borylation allowed the amide to be the limiting reagent. Selectivity for C(sp³)-H activation was demonstrated in the presence of sterically available C(sp³)-H bonds. Competitive kinetic isotope studies revealed a large primary isotope effect, implicating C-H activation as the rate limiting step.

Computational Study of Key Mechanistic Details for a Proposed Copper (I)-Mediated Deconstructive Fluorination of N-Protected Cyclic Amines

Using calculations, we show that a proposed Cu(I)-mediated deconstructive fluorination of N-benzoylated cyclic amines with Selectfluor^® is feasible and may proceed through: (a) substrate coordination to a Cu(I) salt, (b) iminium ion formation followed by conversion to a hemiaminal, and (c) fluorination involving C-C cleavage of the hemiaminal. The iminium ion formation is calculated to proceed via a F-atom coupled electron transfer (FCET) mechanism to form, formally, a product arising from oxidative addition coupled with electron transfer (OA + ET). The subsequent β-C-C cleavage/fluorination of the hemiaminal intermediate may proceed via either ring-opening or deformylative fluorination pathways. The latter pathway is initiated by opening of the hemiaminal to give an aldehyde, followed by formyl H-atom abstraction by a TEDA²⁺ radical dication, decarbonylation, and fluorination of the C3-radical center by another equivalent of Selectfluor^®. In general, the mechanism for the proposed Cu(I)- mediated deconstructive C-H fluorination of N-benzoylated cyclic amines (LH) by Selectfluor^® was calculated to proceed analogously to our previously reported Ag(I)-mediated reaction. In comparison to the Ag(I)-mediated process, in the Cu(I)-mediated reaction the iminium ion formation and hemiaminal fluorination have lower associated energy barriers, whereas the product release and catalyst re-generation steps have higher barriers.

Unconventional mechanism and selectivity of the Pd-catalyzed C-H bond lactonization in aromatic carboxylic acid

The search for more effective and highly selective C-H bond oxidation of accessible hydrocarbons and biomolecules is a greatly attractive research mission. The elucidating of mechanism and controlling factors will, undoubtedly, help to broaden scope of these synthetic protocols, and enable discovery of more efficient, environmentally benign, and highly practical new C-H oxidation reactions. Here, we reveal the stepwise intramolecular S_N2 nucleophilic substitution mechanism with the rate-limiting C-O bond formation step for the Pd(II)-catalyzed C(sp³)-H lactonization in aromatic 2,6-dimethylbenzoic acid. We show that for this reaction, the direct C-O reductive elimination from both Pd(II) and Pd(IV) (oxidized by O₂ oxidant) intermediates is unfavorable. Critical factors controlling the outcome of this reaction are the presence of the η³-(π-benzylic)-Pd and K⁺-O(carboxylic) interactions. The controlling factors of the benzylic vs ortho site-selectivity of this reaction are the: (a) difference in the strains of the generated lactone rings; (b) difference in the strengths of the η³-(π-benzylic)-Pd and η²-(π-phenyl)-Pd interactions, and (c) more pronounced electrostatic interaction between the nucleophilic oxygen and K⁺ cation in the ortho-C-H activation transition state. The presented data indicate the utmost importance of base, substrate, and ligand in the selective C(sp³)-H bond lactonization in the presence of C(sp²)-H.

Autonomous Reaction Network Exploration in Homogeneous and Heterogeneous Catalysis

Autonomous computations that rely on automated reaction network elucidation algorithms may pave the way to make computational catalysis on a par with experimental research in the field. Several advantages of this approach are key to catalysis: (i) automation allows one to consider orders of magnitude more structures in a systematic and open-ended fashion than what would be accessible by manual inspection. Eventually, full resolution in terms of structural varieties and conformations as well as with respect to the type and number of potentially important elementary reaction steps (including decomposition reactions that determine turnover numbers) may be achieved. (ii) Fast electronic structure methods with uncertainty quantification warrant high efficiency and reliability in order to not only deliver results quickly, but also to allow for predictive work. (iii) A high degree of autonomy reduces the amount of manual human work, processing errors, and human bias. Although being inherently unbiased, it is still steerable with respect to specific regions of an emerging network and with respect to the addition of new reactant species. This allows for a high fidelity of the formalization of some catalytic process and for surprising in silico discoveries. In this work, we first review the state of the art in computational catalysis to embed autonomous explorations into the general field from which it draws its ingredients. We then elaborate on the specific conceptual issues that arise in the context of autonomous computational procedures, some of which we discuss at an example catalytic system.

Coordination-assisted, transition-metal-catalyzed enantioselective desymmetric C–H functionalization

Recent advances in transition-metal-catalyzed enantioselective desymmetric C–H functionalization are summarized.

Ruthenium–NHC complex-catalyzed P(iii)-directed C–H borylation of arylphosphines

Bidentate NHC-based ruthenium catalyst for P(III)-directed ortho C–H borylation of arylphosphines.

Momentary Clicking Nitrile Synthesis Enabled by an Aminoazanium Reagent

Achieving fast and selective functional group interconversion is crucial for improving synthetic efficiency in nowadays chemical science. In this context, we report a momentary and selective Schmidt-type nitrile synthesis. The...

Ir-catalyzed proximal and distal C-H borylation of arenes

Over the past two decades, the C-H bond activation and functionalization reaction has been known as a prevailing method for the construction of carbon-carbon and carbon-heteroatom bonds using various transition metal catalysts. In this context, the iridium-catalyzed C-H bond activation and borylation reaction is one of the most valued methods. However, the major challenge in these borylation reactions is how to control the proximal (ortho) and distal (meta and para) selectivity. Interestingly, while so many approaches are now available for the proximal ortho selective borylation of arenes, borylation at the distal meta and or para position of arenes remains still challenging. Only a few approaches have been reported so far in the literature employing iridium catalysis. In this feature article, we have demonstrated some of the recent discoveries from our laboratories for the proximal (ortho) and distal (meta and para) selective borylation reactions. Moreover, some of the recent catalyst engineering discoveries for the selective proximal ortho borylation reactions for a diverse class of substrates have also been discussed. The discussion part of several other pioneering reports is limited due to the lack of scope of this feature article.

Iridium-Catalyzed Regioselective Borylation through C-H Activation and the Origin of Ligand-Dependent Regioselectivity Switching

Research efforts in catalytic regioselective borylation using C-H bond activation of arenes have gained considerable recent attention. The ligand-enabled regiocontrol, such as in the borylation of benzaldehyde, the selectivity could be switched from the ortho to meta position, under identical conditions, by just changing the external ligand (L) from 8-aminoquinoline (8-AQ) to tetramethylphenanthroline (TMP). The DFT(B3LYP-D3) computations helped us learn that the energetically preferred catalytic pathway includes the formation of an Ir-π-complex between the active catalyst [Ir(L)(Bpin)₃] and benzaldimine, a C-H bond oxidative addition (OA) to form an Ir(V)aryl-hydride intermediate, and a reductive elimination to furnish the borylated benzaldehyde as the final product. The lowest energetic span (δE_ortho = 26 kcal/mol with 8-AQ) is noted in the ortho borylation pathway, with the OA transition state (TS) as the turnover-determining TS. The change in regiochemical preference to the meta borylation (δE_meta = 26) with TMP is identified. A hemilabile mode of 8-AQ participation is found to exhibit a δE_ortho of 24 kcal/mol for the ortho borylation, relative to that in the chelate mode (δE_ortho = 26 kcal/mol). The predicted regioselectivity switching is in good agreement with the earlier experimental observations.

Development of Chiral Ligands for the Transition-Metal-Catalyzed Enantioselective Silylation and Borylation of C-H Bonds

Enantioselective reactions that install functional groups at the positions of unactivated C-H bonds can be envisioned to produce intermediates for the synthesis of the active ingredients in pharmaceuticals and agrochemicals directly from simple feedstocks. Among these C-H bond functionalization reactions, those that form carbon-silicon (C-Si) and carbon-boron (C-B) bonds have been pursued because the products of these reactions can be converted to those containing a wide range of functional groups and because compounds containing silicon and boron possess unique properties that can be valuable for medicinal and materials chemistry. Although the silylation and borylation of C-H bonds have undergone extensive development during the past two decades, enantioselective versions of these reactions were not known until a few years ago. In this Minireview, we present the rapid development of enantioselective silylation and borylation of C-H bonds, with an emphasis on the design and development of the types of chiral ligands needed to achieve these reactions and an intention to inspire an expansion of these types of transformations.

Supramolecular catalysis: the role of H-bonding interactions in substrate orientation and activation

Hydrogen bonding plays significant roles in various biological processes during substrate orientation and binding and therefore assists in assorted organic transformations. However, replicating the intricate selection of hydrogen bonds, as observed in nature, in synthetic complexes has met with only limited success. Despite this fact, recent times have seen the emergence of several notable examples where hydrogen bonds have been introduced in synthetic complexes. A few such examples have also illustrated the substantial role played by the hydrogen bonds in influencing and often controlling the catalytic outcome. This perspective presents selected examples illustrating the significance of hydrogen bonds offered by the coordination and the organometallic complexes that aid in providing the desired orientation to a substrate adjacent to a catalytic metal center and remarkably assisting in the catalysis.

Recent advances in asymmetric borylation by transition metal catalysis

Chiral organoboronates have played a critical role in organic chemistry and in the development of materials science and pharmaceuticals. Much effort has been devoted to exploring synthetic methodologies for the preparation of these compounds during the past few decades. Among the known methods, asymmetric catalysis has emerged as a practical and highly efficient strategy for their straightforward preparation, and recent years have witnessed remarkable advances in this respect. Approaches such as asymmetric borylative addition, asymmetric allylic borylation and stereospecific cross-coupling borylation, have been extensively explored and well established employing transition-metal catalysis with a chiral ligand. This review provides a comprehensive overview of transition metal-catalysed asymmetric borylation processes to construct carbon-boron, carbon-carbon, and other carbon-heteroatom bonds. It summarises a range of recent achievements in this area of research, with considerable attention devoted to the reaction modes and the mechanisms involved.

Water-Induced Chiral Separation on a Au(111) Surface

Facing the scientific question of the origin of chirality in life, water is considered to play a crucial role in driving many biologically relevant processes in vivo. Water has been demonstrated in vitro to be related to chiral generation, amplification, and inversion, while the underlying mechanism is still not fully understood. Real-space evidence at the single-molecule level is thus urgently required to understand the role of water molecules in biomolecular chirality related issues. Herein, we choose one of the RNA bases, the biomolecule uracil (U), which self-assembles into racemic hydrogen-bonded structures. Upon water exposure, surprisingly, racemic structures could be transformed to homochiral water-involved structures, resulting in an unexpected chiral separation on the surface. The origin of chiral separation is due to preferential binding between water and the specific site of U molecules, which leads to the formation of the energetically most favorable homochiral (U-H₂O-U)₂ cluster as seed for subsequent chiral amplification. Such a water-driven self-assembly process may also be extended to other biologically relevant systems such as amino acids and sugars, which would provide general insights into the role that water molecules may play in the origin of homochirality in vivo.

A Bifunctional Copper Catalyst Enables Ester Reduction with H2: Expanding the Reactivity Space of Nucleophilic Copper Hydrides

Employing a bifunctional catalyst based on a copper(I)/NHC complex and a guanidine organocatalyst, catalytic ester reductions to alcohols with H₂ as terminal reducing agent are facilitated. The approach taken here enables the simultaneous activation of esters through hydrogen bonding and formation of nucleophilic copper(I) hydrides from H₂, resulting in a catalytic hydride transfer to esters. The reduction step is further facilitated by a proton shuttle mediated by the guanidinium subunit. This bifunctional approach to ester reductions for the first time shifts the reactivity of generally considered "soft" copper(I) hydrides to previously unreactive "hard" ester electrophiles and paves the way for a replacement of stoichiometric reducing agents by a catalyst and H₂.

Transient Directing Groups in Metal-Organic Cooperative Catalysis

The direct functionalization of C-H bonds is among the most fundamental chemical transformations in organic synthesis. However, when the innate reactivity of the substrate cannot be utilized for the functionalization of a given single C-H bond, this selective C-H bond functionalization mostly relies on the use of directing groups that allow bringing the catalyst in close proximity to the C-H bond to be activated and these directing groups need to be installed before and cleaved after the transformation, which involves two additional undesired synthetic operations. These additional steps dramatically reduce the overall impact and the attractiveness of C-H bond functionalization techniques since classical approaches based on substrate pre-functionalization are sometimes still more straightforward and appealing. During the past decade, a different approach involving both the in situ installation and removal of the directing group, which can then often be used in a catalytic manner, has emerged: the transient directing group strategy. In addition to its innovative character, this strategy has brought C-H bond functionalization to an unprecedented level of usefulness and has enabled the development of remarkably efficient processes for the direct and selective introduction of functional groups onto both aromatic and aliphatic substrates. The processes unlocked by the development of these transient directing groups will be comprehensively overviewed in this review article.

Site-Fixed Hydroboration of Terminal and Internal Alkenes using BX3 /i Pr2 NEt*

An unprecedented and general hydroboration of alkenes with BX₃ (X=Br, Cl) as the boration reagent in the presence of ⁱ Pr₂ NEt is reported. The addition of ⁱ Pr₂ NEt not only suppresses alkene polymerization and haloboration side reactions but also provides an "H" source for hydroboration. More importantly, the site-fixed installation of a boryl group at the original position of the internal double bond is readily achieved in contrast to conventional transition-metal-catalyzed hydroboration processes. Further application to the synthesis of 1,n-diborylalkanes (n=3-10) is also demonstrated. Preliminary mechanistic studies reveal a major reaction pathway that involves radical species and operates through a frustrated Lewis pair type single-electron-transfer mechanism.

Enzyme-like Supramolecular Iridium Catalysis Enabling C-H Bond Borylation of Pyridines with meta-Selectivity

The use of secondary interactions between substrates and catalysts is a promising strategy to discover selective transition metal catalysts for atom-economy C-H bond functionalization. The most powerful catalysts are found via trial-and-error screening due to the low association constants between the substrate and the catalyst in which small stereo-electronic modifications within them can lead to very different reactivities. To circumvent these limitations and to increase the level of reactivity prediction in these important reactions, we report herein a supramolecular catalyst harnessing Zn⋅⋅⋅N interactions that binds to pyridine-like substrates as tight as it can be found in some enzymes. The distance and spatial geometry between the active site and the substrate binding site is ideal to target unprecedented meta-selective iridium-catalyzed C-H bond borylations with enzymatic Michaelis-Menten kinetics, besides unique substrate selectivity and dormant reactivity patterns.

Photoinduced copper-catalysed asymmetric amidation via ligand cooperativity

The substitution of an alkyl electrophile by a nucleophile is a foundational reaction in organic chemistry that enables the efficient and convergent synthesis of organic molecules. Although there has been substantial recent progress in exploiting transition-metal catalysis to expand the scope of nucleophilic substitution reactions to include carbon nucleophiles1-4, there has been limited progress in corresponding reactions with nitrogen nucleophiles5-8. For many substitution reactions, the bond construction itself is not the only challenge, as there is a need to control stereochemistry at the same time. Here we describe a method for the enantioconvergent substitution of unactivated racemic alkyl electrophiles by a ubiquitous nitrogen-containing functional group, an amide. Our method uses a photoinduced catalyst system based on copper, an Earth-abundant metal. This process for asymmetric N-alkylation relies on three distinct ligands-a bisphosphine, a phenoxide and a chiral diamine. The ligands assemble in situ to form two distinct catalysts that act cooperatively: a copper/bisphosphine/phenoxide complex that serves as a photocatalyst, and a chiral copper/diamine complex that catalyses enantioselective C-N bond formation. Our study thus expands enantioselective N-substitution by alkyl electrophiles beyond activated electrophiles (those bearing at least one sp- or sp2-hybridized substituent on the carbon undergoing substitution)8-13 to include unactivated electrophiles.

Pd-catalysed β-selective C(sp3)-H arylation of simple amides

An efficient Pd-catalysed β-C(sp³)-H arylation of diverse native amides with aryl iodides was developed. This protocol overcomes the necessity of the Thorpe-Ingold effect and features broad substrate scope and good functional group tolerance. The potential application of this protocol is collectively demonstrated by gram-scale synthesis and the synthesis of several bioactive molecules.

Construction of Axially Chiral Arylborons via Atroposelective Miyaura Borylation

Compared with the well-developed centrally chiral boron chemistry, C-B axially chiral chemistry remains elusive and challenging. Herein we report the first atroposelective Miyaura borylation of bromoarenes with unsymmetrical diboron reagents for the direct catalytic synthesis of optically active atropisomeric arylborons. This reaction features broad substrate scope and produces axially chiral arylborons with high yields and good enantioselectivities.