Flexible thermoelectrics based on ductile semiconductors

The development and impact of tin selenide on thermoelectrics

Thermoelectric technology experienced rapid development over the past 20 years, with the most promising applications being in both power generation and active cooling. Among existing thermoelectrics, tin selenide (SnSe) has had particularly rapid development owing to the unexpectedly high thermoelectric efficiency that has been continuously established over the past decade. Several transport mechanisms and strategies used to interpret and improve the thermoelectric performance of SnSe have been important for understanding and developing other material systems with SnSe-like characteristics. Similar to other thermoelectrics, building commercially viable SnSe-based devices requires advances in device efficiency and service stability. Further optimization across all material systems should enable thermoelectric technology to play a critical role in the future global energy landscape.

Thermoelectric Materials and Devices for Advanced Biomedical Applications

Thermoelectrics (TEs), enabling the direct conversion between heat and electrical energy, have demonstrated extensive application potential in biomedical fields. Herein, the mechanism of the TE effect, recent developments in TE materials, and the biocompatibility assessment of TE materials are provided. In addition to the fundamentals of TEs, a timely and comprehensive review of the recent progress of advanced TE materials and their applications is presented, including wearable power generation, personal thermal management, and biosensing. In addition, the new-emerged medical applications of TE materials in wound healing, disease treatment, antimicrobial therapy, and anti-cancer therapy are thoroughly reviewed. Finally, the main challenges and future possibilities are outlined for TEs in biomedical fields, as well as their material selection criteria for specific application scenarios. Together, these advancements can provide innovative insights into the development of TEs for broader applications in biomedical fields.

Deviceization of high-performance and flexible Ag2Se films for electronic skin and servo rotation angle control

Ag2Se shows significant potential for near-room-temperature thermoelectric applications, but its performance and device design are still evolving. In this work, we design a novel flexible Ag2Se thin-film-based thermoelectric device with optimized electrode materials and structure, achieving a high output power density of over 65 W m-2 and a normalized power density up to 3.68 μW cm-2 K-2 at a temperature difference of 42 K. By fine-tuning vapor selenization time, we strengthen the (013) orientation and carrier mobility of Ag2Se films, reducing excessive Ag interstitials and achieving a power factor of over 29 μW cm-1 K-2 at 393 K. A protective layer boosts flexibility of the thin film, retaining 90% performance after 1000 bends at 60°. Coupled with p-type Sb2Te3 thin films and rational simulations, the device shows rapid human motion response and precise servo motor control, highlighting the potential of high-performance Ag2Se thin films in advanced applications.

High power density redox-mediated Shewanella microbial flow fuel cells

Microbial fuel cells utilize exoelectrogenic microorganisms to directly convert organic matter into electricity, offering a compelling approach for simultaneous power generation and wastewater treatment. However, conventional microbial fuel cells typically require thick biofilms for sufficient metabolic electron production rate, which inevitably compromises mass and charge transport, posing a fundamental tradeoff that limits the achievable power density (<1 mW cm-2). Herein, we report a concept for redox-mediated microbial flow fuel cells that utilizes artificial redox mediators in a flowing medium to efficiently transfer metabolic electrons from planktonic bacteria to electrodes. This approach effectively overcomes mass and charge transport limitations, substantially reducing internal resistance. The biofilm-free microbial flow fuel cell thus breaks the inherent tradeoff in dense biofilms, resulting in a maximum current density surpassing 40 mA cm-2 and a highest power density exceeding 10 mW cm-2, approximately one order of magnitude higher than those of state-of-the-art microbial fuel cells.

Sn-Doping-Induced Biphasic Structure Advances Ductile Ag2S-Based Thermoelectrics

Due to its inherent ductility, Ag2S shows promise as a flexible thermoelectric material for harnessing waste heat from diverse sources. However, its thermoelectric performance remains subpar, and existing enhancement strategies often compromise its ductility. In this study, a novel Sn-doping-induced biphasic structuring approach is introduced to synergistically control electron and phonon transport. Specifically, Sn-doping is incorporated into Ag2S0.7Se0.3 to form a biphasic composition comprising (Ag, Sn)2S0.7Se0.3 as the primary phase and Ag2S0.7Se0.3 as the secondary phase. This biphasic configuration achieves a competitive figure-of-merit ZT of 0.42 at 343 K while retaining exceptional ductility, exceeding 90%. The dominant (Ag, Sn)2S0.7Se0.3 phase bolsters the initially low carrier concentration, with interfacial boundaries between the phases effectively mitigating carrier scattering and promoting carrier mobility. Consequently, the optimized power factor reaches 5 µW cm-1 K-2 at 343 K. Additionally, the formation of the biphasic structure induces diverse micro/nano defects, suppressing lattice thermal conductivity to a commendable 0.18 W m-1 K-1, thereby achieving optimized thermoelectric performance. As a result, a four-leg in-plane flexible thermoelectric device is fabricated, exhibiting a maximum power density of ≈49 µW cm-2 under the temperature difference of 30 K, much higher than that of organic-based flexible thermoelectric devices.

Advancing flexible thermoelectrics for integrated electronics

With the increasing demand for energy and the climate challenges caused by the consumption of traditional fuels, there is an urgent need to accelerate the adoption of green and sustainable energy conversion and storage technologies. The integration of flexible thermoelectrics with other various energy conversion technologies plays a crucial role, enabling the conversion of multiple forms of energy such as temperature differentials, solar energy, mechanical force, and humidity into electricity. The development of these technologies lays the foundation for sustainable power solutions and promotes research progress in energy conversion. Given the complexity and rapid development of this field, this review provides a detailed overview of the progress of multifunctional integrated energy conversion and storage technologies based on thermoelectric conversion. The focus is on improving material performance, optimizing the design of integrated device structures, and achieving device flexibility to expand their application scenarios, particularly the integration and multi-functionalization of wearable energy conversion technologies. Additionally, we discuss the current development bottlenecks and future directions to facilitate the continuous advancement of this field.

Phase-Change Stamp with Highly Switchable Adhesion and Stiffness for Damage-Free Multiscale Transfer Printing

Transfer printing is a technology widely used in the production of flexible electronics and vertically stacked devices, which involves the transfer of predefined electronic components from a rigid donor substrate to a receiver substrate with a stamp, potentially avoiding the limitations associated with lithographic processes. However, the stamps typically used in transfer printing have several limitations related to unwanted organic solvents, substantial loading, film damage, and inadequate adhesion switching ratios. This study introduces a thermally responsive phase-change stamp for efficient and damage-free transfer printing inspired by the adhesion properties observed during water freezing and ice melting. The stamp employs phase-change composites and simple fabrication protocols, providing robust initial adhesion strength and switchability. The underlying mechanism of switchable adhesion is investigated through experimental and numerical studies. Notably, the stamp eliminates the need for extra preload by spontaneously interlocking with the ink through in situ melting and crystallization. This minimizes ink damage and wrinkle formation during pickup while maintaining strong initial adhesion. During printing, the stamp exhibits a sufficiently weak adhesion state for reliable and consistent release, enabling multiscale, conformal, and damage-free transfer printing, ranging from nano- to wafer-scale. The fabrication of nanoscale short-channel transistors, epidermal electrodes, and human-machine interfaces highlights the potential of this technique in various emerging applications of nanoelectronics, nano optoelectronics, and soft bioelectronics.

High-Performance AgSbTe2 Thermoelectrics: Advances, Challenges, and Perspectives

Environmental-friendless and high-performance thermoelectrics play a significant role in exploring sustainable clean energy. Among them, AgSbTe2 thermoelectrics, benefiting from the disorder in the cation sublattice and interface scattering from secondary phases of Ag2Te and Sb2Te3, exhibit low thermal conductivity and a maximum figure-of-merit ZT of 2.6 at 573 K via optimizing electrical properties and addressing phase transition issues. Therefore, AgSbTe2 shows considerable potential as a promising medium-temperature thermoelectric material. Additionally, with the increasing demands for device integration and portability in the information age, the research on flexible and wearable AgSbTe2 thermoelectrics aligns with contemporary development needs, leading to a growing number of research findings. This work provides a detailed and timely review of AgSbTe2-based thermoelectrics from materials to devices. Principles and performance optimization strategies are highlighted for the thermoelectric performance enhancement in AgSbTe2. The current challenges and future research directions of AgSbTe2-based thermoelectrics are pointed out. This review will guide the development of high-performance AgSbTe2-based thermoelectrics for practical applications.

Silver Copper Chalcogenide Thermoelectrics: Advance, Controversy, and Perspective

Thermoelectric technology, which enables a direct and pollution-free conversion of heat into electricity, provides a promising path to address the current global energy crisis. Among the broad range of thermoelectric materials, silver copper chalcogenides (AgCuQ, Q = S, Se, Te) have garnered significant attention in thermoelectric community in light of inherently ultralow lattice thermal conductivity, controllable electronic transport properties, excellent thermoelectric performance across various temperature ranges, and a degree of ductility. This review epitomizes the recent progress in AgCuQ-based thermoelectric materials, from the optimization of thermoelectric performance to the rational design of devices, encompassing the fundamental understanding of crystal structures, electronic band structures, mechanical properties, and quasi-liquid behaviors. The correlation between chemical composition, mechanical properties, and thermoelectric performance in this material system is also highlighted. Finally, several key issues and prospects are proposed for further optimizing AgCuQ-based thermoelectric materials.

3D Soft Architectures for Stretchable Thermoelectric Wearables with Electrical Self-Healing and Damage Tolerance

Flexible thermoelectric devices (TEDs) exhibit adaptability to curved surfaces, holding significant potential for small-scale power generation and thermal management. However, they often compromise stretchability, energy conversion, or robustness, thus limiting their applications. Here, the implementation of 3D soft architectures, multifunctional composites, self-healing liquid metal conductors, and rigid semiconductors is introduced to overcome these challenges. These TEDs are extremely stretchable, functioning at strain levels as high as 230%. Their unique design, verified through multiphysics simulations, results in a considerably high power density of 115.4 µW cm⁻2 at a low-temperature gradient of 10 °C. This is achieved through 3D printing multifunctional elastomers and examining the effects of three distinct thermal insulation infill ratios (0%, 12%, and 100%) on thermoelectric energy conversion and structural integrity. The engineered structure is lighter and effectively maintains the temperature gradient across the thermoelectric semiconductors, thereby resulting in higher output voltage and improved heating and cooling performance. Furthermore, these thermoelectric generators show remarkable damage tolerance, remaining fully functional even after multiple punctures and 2000 stretching cycles at 50% strain. When integrated with a 3D-printed heatsink, they can power wearable sensors, charge batteries, and illuminate LEDs by scavenging body heat at room temperature, demonstrating their application as self-sustainable electronics.

Stretchable and Skin-Conformal Thermoelectric Generator with Highly Flexible and Plastically Bendable Silver Selenide Films

Among inorganic thermoelectric materials, flexible thermoelectric materials have attracted considerable attention. In this study, highly flexible and plastically bendable silver selenide films with excellent thermoelectric performance at room temperature are presented. The flexibility of the freestanding silver selenide films was significantly improved through a simple annealing treatment. The highly flexible silver selenide films with a thickness of 26.0 μm displayed outstanding n-type thermoelectric performance, achieving an in-plane zT value of 0.38 at room temperature. Because silver selenide films are plastically bendable with a bending radius of less than 1 mm, they can be shaped into various forms. To achieve stretchability and skin-conformality in the thermoelectric generator, S-shaped silver selenide strips were used as an n-type thermoelectric element. Effective harvesting of electricity from heat of the human body was successfully demonstrated.

Orientation optimization for high performance Mg3Sb2thermoelectric films via thermal evaporation

Low-cost, highly efficient thermoelectric thin-film materials are becoming increasingly popular as miniaturization progresses. Mg3Sb2has great potential due to its low cost and high performance. However, the fabrication of Mg3Sb2thin films with high power factors (PFs) poses a certain challenge. In this work, we propose a general approach to prepare Mg3Sb2thin films with excellent thermoelectric properties. Using a two-step thermal evaporation and rapid annealing process, (001)-oriented Mg3Sb2thin films are fabricated onc-plane-oriented Al2O3substrates. The structure of the film orientation is optimized by controlling the film thickness, which modulates the thermoelectric performance. The PF of the Mg3Sb2at 500 nm (14μW·m-1·K-2) would increase to 169μW·m-1·K-2with Ag doping (Mg3Ag0.02Sb2) at room temperature. This work provides a new strategy for the development of high-performance thermoelectric thin films at room temperature.

Series/Parallel Switching for Increasing Power Extraction from Thermoelectric Power Generators

We propose a method for increasing power extraction from a thermoelectric generator (TEG) by switching between series/parallel circuit configurations of thermoelectric elements, which can adjust the internal impedance of the TEG. The power characteristics of the TEG can be adjusted to the load characteristics of the connected device and the relevant ambient temperature. In this paper, we analyzed the change in the TEG characteristics with the series/parallel switching function. We evaluated the power supply to the connected devices at different ambient temperatures and different series/parallel configurations and confirmed that the extracted power could be increased. By theoretically analyzing the circuit configuration of the thermoelectric devices, the switching required to improve the power extraction, and the temperature difference at which switching occurred, we devised a design method for a TEG with circuit switching in order to increase power extraction with any device. We demonstrated the configuration of switching by using a system in which a TEG supplied power to an external wireless transmitter circuit. In this system, the optimal configuration differed at temperature differences of 3.0 K and 4.0 K. At a temperature difference of 3.0 K, the 2-series/1-parallel configuration provided 10% more power to the external circuit than the 1-series/2-parallel configuration. On the other hand, at the temperature difference of 4.0 K, the 1-series/2-parallel configuration provided 23% more power than the 2-series/1-parallel configuration.

Approaching crystal's limit of thermoelectrics by nano-sintering-aid at grain boundaries

Grain boundary plays a vital role in thermoelectric transports, leading to distinct properties between single crystals and polycrystals. Manipulating the grain boundary to realize good thermoelectric properties in polycrystals similar as those of single crystals is a long-standing task, but it is quite challenging. Herein, we develop a liquid-phase sintering strategy to successfully introduce Mg2Cu nano-sintering-aid into the grain boundaries of Mg3(Bi, Sb)2-based materials. The nano-aid helps to enlarge the average grain size to 23.7 μm and effectively scatter phonons, leading to excellent electrical transports similar as those of single crystals and ultralow lattice thermal conductivity as well as exceptional thermoelectric figure of merit (1.5 at 500 K) and conversion efficiency (7.4% under temperature difference of 207 K). This work provides a simple but effective strategy for the fabrication of high-performance polycrystals for large-scale applications.

Ag2Se as a tougher alternative to n-type Bi2Te3 thermoelectrics

For half a century, only Bi2Te3-based thermoelectrics have been commercialized for near room temperature applications including both power generation and refrigeration. Because of the strong layered structure, Bi2Te3 in particular for n-type conduction has to be texturized to utilize its high in-plane thermoelectric performance, leaving a substantial challenge in toughness. This work presents the fabrication and performance evaluation of thermoelectric modules based on n-type Ag2Se paring with commercial p-Bi2Te3. Ag2Se mechanically allows an order of magnitude larger fracture strain and thermoelectrically secures the module efficiency quite competitive to that of commercial one for both refrigeration and power generation within ± 50 K of room temperature, enabling a demonstration of a significantly tougher alternative to n-type Bi2Te3 for practical applications.

Multi-heterojunctioned plastics with high thermoelectric figure of merit

Conjugated polymers promise inherently flexible and low-cost thermoelectrics for powering the Internet of Things from waste heat1,2. Their valuable applications, however, have been hitherto hindered by the low dimensionless figure of merit (ZT)3-6. Here we report high-ZT thermoelectric plastics, which were achieved by creating a polymeric multi-heterojunction with periodic dual-heterojunction features, where each period is composed of two polymers with a sub-ten-nanometre layered heterojunction structure and an interpenetrating bulk-heterojunction interface. This geometry produces significantly enhanced interfacial phonon-like scattering while maintaining efficient charge transport. We observed a significant suppression of thermal conductivity by over 60 per cent and an enhanced power factor when compared with individual polymers, resulting in a ZT of up to 1.28 at 368 kelvin. This polymeric thermoelectric performance surpasses that of commercial thermoelectric materials and existing flexible thermoelectric candidates. Importantly, we demonstrated the compatibility of the polymeric multi-heterojunction structure with solution coating techniques for satisfying the demand for large-area plastic thermoelectrics, which paves the way for polymeric multi-heterojunctions towards cost-effective wearable thermoelectric technologies.

Ductile P-Type AgCu(Se,S,Te) Thermoelectric Materials

Ductile inorganic thermoelectric (TE) materials open a new approach to develop high-performance flexible TE devices. N-type Ag2(S,Se,Te) and p-type AgCu(Se,S,Te) pseudoternary solid solutions are two typical categories of ductile inorganic TE materials reported so far. Comparing with the Ag2(S,Se,Te) pseudoternary solid solutions, the phase composition, crystal structure, and physical properties of AgCu(Se,S,Te) pseudoternary solid solutions are more complex, but their relationships are still ambiguous now. In this work, via systematically investigating the phase composition, crystal structure, mechanical, and TE properties of about 60 AgCu(Se,S,Te) pseudoternary solid solutions, the comprehensive composition-structure-property phase diagrams of the AgCuSe-AgCuS-AgCuTe pseudoternary system is constructed. By mapping the complex phases, the "ductile-brittle" and "n-p" transition boundaries are determined and the composition ranges with high TE performance and inherent ductility are illustrated. On this basis, high performance p-type ductile TE materials are obtained, with a maximum zT of 0.81 at 340 K. Finally, flexible in-plane TE devices are prepared by using the AgCu(Se,S,Te)-based ductile TE materials, showing high output performance that is superior to those of organic and inorganic-organic hybrid flexible devices.

High Ductility and Excellent Thermoelectric Performance in Te-Stabilized Cubic Ag2TexS1-x Solid Solutions

The stabilization at low temperatures of the Ag2S cubic phase could afford the design of high-performance thermoelectric materials with excellent mechanical behavior, enabling them to withstand prolonged vibrations and thermal stress. In this work, we show that the Ag2TexS1-x solid solutions, with Te content within the optimal range 0.20 ≤ x ≤ 0.30, maintain a stable cubic phase across a wide temperature range from 300 to 773 K, thus avoiding the detrimental phase transition from monoclinic to cubic phase observed in Ag2S. Notably, the Ag2TexS1-x (0.20 ≤ x ≤ 0.30) samples showed no fractures during bending tests and displayed superior ductility at room temperature compared to Ag2S, which fractured at a strain of 6.6%. Specifically, the Ag2Te0.20S0.80 sample demonstrated a bending average yield strength of 46.52 MPa at 673 K, significantly higher than that of Ag2S, whose bending average yield strength dropped from 80.15 MPa at 300 K to 12.66 MPa at 673 K. Furthermore, the thermoelectric performance of the Ag2TexS1-x (0.20 ≤ x ≤ 0.30) samples surpassed that of both InSe and pure Ag2S, with the Ag2Te0.30S0.70 sample achieving the highest ZT value of 0.59 at 723 K. These results indicate substantial potential for practical applications due to enhanced durability and thermoelectric performance.

3D-printed Bi2Te3-based Thermoelectric Generators for Energy Harvesting and Temperature Response

Thermoelectric generators (TEGs) are environmentally friendly energy harvesting technologies that hold great promise in the field of self-powered electronics and sensing. However, the current development of thermoelectric (TE) devices has largely lagged behind the development of thermoelectric materials, especially in the preparation of thermoelectric components with customizable shapes and excellent properties, which largely limits their practical applications. These issues can be effectively addressed by using 3D printing technology. Here, we print multiple p-type thermoelectric legs (pins) consecutively with this simple technique, and the printed TEGs have excellent thermal potential (288 μV K-1 at room temperature) and excellent temperature response properties, which exhibited an output voltage of 127.94 mV at a temperature difference (ΔT) of 40 K. The 3D-printed thermoelectric generator enables the collection of thermal energy. In addition, the device has excellent temperature sensing characteristics, and this temperature signal to electrical signal conversion is very rapid, which enables temperature sensing alarms in a wide temperature domain. Combining these features, an energy harvesting and electrical alarm concept for home-scale applications is proposed, which is expected to provide a diverse research idea for the application of next-generation thermoelectric devices.

The Remarkable Role of Indium in Synergistically Optimizing Carrier Concentration and Phase Distribution of AgCuTe-Based Materials

Carrier regulation has proven to be an effective approach for optimizing the thermoelectric performance of materials. One common method to adjust the carrier concentration is through element doping. In the case of AgCuTe-based materials, it tends to form with cation vacancies, resulting in a high hole concentration and complex phase composition at low temperatures, which also hinders material stability. However, this also offers additional opportunities to manipulate the carrier concentration. In this study, the improved performance of AgCuTe through indium doping is reported, which leads to a reduction in hole concentration. In combination with a significant increase in the effective mass of the carriers, the enhanced Seebeck coefficient is also realized. Particularly, a notable improvement in power factor is observed in the hexagonal phase near room temperature. Furthermore, a lower electron thermal conductivity is achieved, contributing to an average figure of merit value of ≈1.21 (between 523 and 723 K). Additionally, the presence of indium inhibits the formation of the second phase and ensures a homogeneous phase distribution, which reduces the instability arising from phase transition. This work significantly enhances the potential of AgCuTe-based materials for low to medium-temperature applications.

Plasticity in single-crystalline Mg3Bi2 thermoelectric material

Most of the state-of-the-art thermoelectric materials are inorganic semiconductors. Owing to the directional covalent bonding, they usually show limited plasticity at room temperature1,2, for example, with a tensile strain of less than five per cent. Here we discover that single-crystalline Mg3Bi2 shows a room-temperature tensile strain of up to 100 per cent when the tension is applied along the (0001) plane (that is, the ab plane). Such a value is at least one order of magnitude higher than that of traditional thermoelectric materials and outperforms many metals that crystallize in a similar structure. Experimentally, slip bands and dislocations are identified in the deformed Mg3Bi2, indicating the gliding of dislocations as the microscopic mechanism of plastic deformation. Analysis of chemical bonding reveals multiple planes with low slipping barrier energy, suggesting the existence of several slip systems in Mg3Bi2. In addition, continuous dynamic bonding during the slipping process prevents the cleavage of the atomic plane, thus sustaining a large plastic deformation. Importantly, the tellurium-doped single-crystalline Mg3Bi2 shows a power factor of about 55 microwatts per centimetre per kelvin squared and a figure of merit of about 0.65 at room temperature along the ab plane, which outperforms the existing ductile thermoelectric materials3,4.

High performance magnesium-based plastic semiconductors for flexible thermoelectrics

Low-cost thermoelectric materials with simultaneous high performance and superior plasticity at room temperature are urgently demanded due to the lack of ever-lasting power supply for flexible electronics. However, the inherent brittleness in conventional thermoelectric semiconductors and the inferior thermoelectric performance in plastic organics/inorganics severely limit such applications. Here, we report low-cost inorganic polycrystalline Mg3Sb0.5Bi1.498Te0.002, which demonstrates a remarkable combination of large strain (~ 43%) and high figure of merit zT (~ 0.72) at room temperature, surpassing both brittle Bi2(Te,Se)3 (strain ≤ 5%) and plastic Ag2(Te,Se,S) and organics (zT ≤ 0.4). By revealing the inherent high plasticity in Mg3Sb2 and Mg3Bi2, capable of sustaining over 30% compressive strain in polycrystalline form, and the remarkable deformability of single-crystalline Mg3Bi2 under bending, cutting, and twisting, we optimize the Bi contents in Mg3Sb2-xBix (x = 0 to 1) to simultaneously boost its room-temperature thermoelectric performance and plasticity. The exceptional plasticity of Mg3Sb2-xBix is further revealed to be brought by the presence of a dense dislocation network and the persistent Mg-Sb/Bi bonds during slipping. Leveraging its high plasticity and strength, polycrystalline Mg3Sb2-xBix can be easily processed into micro-scale dimensions. As a result, we successfully fabricate both in-plane and out-of-plane flexible Mg3Sb2-xBix thermoelectric modules, demonstrating promising power density. The inherent remarkable plasticity and high thermoelectric performance of Mg3Sb2-xBix hold the potential for significant advancements in flexible electronics and also inspire further exploration of plastic inorganic semiconductors.

Manipulating Hetero-Nanowire Films for Flexible and Multifunctional Thermoelectric Devices

Flexible thermoelectric devices hold significant promise in wearable electronics owing to their capacity for green energy generation, temperature sensing, and comfortable wear. However, the simultaneous achievement of excellent multifunctional sensing and power generation poses a challenge in these devices. Here, ordered tellurium-based hetero-nanowire films are designed for flexible and multifunctional thermoelectric devices by optimizing the Seebeck coefficient and power factor. The obtained devices can efficiently detect both object and environment temperature, thermal conductivity, heat proximity, and airflow. In addition, combining the thermoelectric units with radiative cooling materials exhibits remarkable thermal management capabilities, preventing device overheating and avoiding degradation in power generation. Impressively, this multifunctional electronics exhibits excellent resistance in extreme low earth orbit environments. The fabrication of such thermoelectric devices provides innovative insights into multimodal sensing and energy harvesting.

Core-Sheath Heterogeneous Interlocked Conductive Fiber Enables Smart Textile for Personalized Healthcare and Thermal Management

Whereas thermal comfort and healthcare management during long-term wear are essentially required for wearable system, simultaneously achieving them remains challenge. Herein, a highly comfortable and breathable smart textile for personal healthcare and thermal management is developed, via assembling stimuli-responsive core-sheath dual network that silver nanowires(AgNWs) core interlocked graphene sheath induced by MXene. Small MXene nanosheets with abundant groups is proposed as a novel "dispersant" to graphene according to "like dissolves like" theory, while simultaneously acting as "cross-linker" between AgNWs and graphene networks by filling the voids between them. The core-sheath heterogeneous interlocked conductive fiber induced by MXene "cross-linking" exhibits a reliable response to various mechanical/electrical/light stimuli, even under large mechanical deformations(100%). The core-sheath conductive fiber-enabled smart textile can adapt to movements of human body seamlessly, and convert these mechanical deformations into character signals for accurate healthcare monitoring with rapid response(440 ms). Moreover, smart textile with excellent Joule heating and photothermal effect exhibits instant thermal energy harvesting/storage during the stimuli-response process, which can be developed as self-powered thermal management and dynamic camouflage when integrated with phase change and thermochromic layer. The smart fibers/textiles with core-sheath heterogeneous interlocked structures hold great promise in personalized healthcare and thermal management.

Passive Self-Sustained Thermoelectric Devices Powering the 24 h Wireless Transmission via Radiation-Cooling and Selective Photothermal Conversion

The rapid development of the Internet of Things has triggered a huge demand for self-sustained technology that can provide a continuous electricity supply for low-power electronics. Here, a self-sustained power supply solution is demonstrated that can produce a 24 h continuous and unipolar electricity output based on thermoelectric devices by harvesting the environmental temperature difference, which is ingeniously established utilizing radiation cooling and selective photothermal conversion. The developed prototype system can stably maintain a large temperature difference of about 1.8 K for a full day despite the real-time changes in environmental temperature and solar radiation, thereby driving continuous electricity output using the built-in thermoelectric device. Specifically, the large output voltage of >102 mV and the power density of >4.4 mW m-2 could be achieved for a full day, which are outstanding among the 24 h self-sustained thermoelectric devices and far higher than the start-up values of the wireless temperature sensor and also the light-emitting diode, enabling the 24 h remote data transmission and lighting, respectively. This work highlights the application prospects of self-sustained thermoelectric devices for low-power electronics.

Unraveling electronic origins for boosting thermoelectric performance of p-type (Bi,Sb)2Te3

P-type Bi2-xSbxTe3 compounds are crucial for thermoelectric applications at room temperature, with Bi0.5Sb1.5Te3 demonstrating superior performance, attributed to its maximum density-of-states effective mass (m*). However, the underlying electronic origin remains obscure, impeding further performance optimization. Herein, we synthesized high-quality Bi2-xSbxTe3 (00 l) films and performed comprehensive angle-resolved photoemission spectroscopy (ARPES) measurements and band structure calculations to shed light on the electronic structures. ARPES results directly evidenced that the band convergence along the [Formula: see text]-[Formula: see text] direction contributes to the maximum m* of Bi0.5Sb1.5Te3. Moreover, strategic manipulation of intrinsic defects optimized the hole density of Bi0.5Sb1.5Te3, allowing the extra valence band along [Formula: see text]-[Formula: see text] to contribute to the electrical transport. The synergy of the above two aspects documented the electronic origins of the Bi0.5Sb1.5Te3's superior performance that resulted in an extraordinary power factor of ~5.5 milliwatts per meter per square kelvin. The study offers valuable guidance for further performance optimization of p-type Bi2-xSbxTe3.

High-performance flexible p-type Ce-filled Fe3CoSb12 skutterudite thin film for medium-to-high-temperature applications

P-type Fe3CoSb12-based skutterudite thin films are successfully fabricated, exhibiting high thermoelectric performance, stability, and flexibility at medium-to-high temperatures, based on preparing custom target materials and employing advanced pulsed laser deposition techniques to address the bonding challenge between the thin films and high-temperature flexible polyimide substrates. Through the optimization of fabrication processing and nominal doping concentration of Ce, the thin films show a power factor of >100 μW m-1 K-2 and a ZT close to 0.6 at 653 K. After >2000 bending cycle tests at a radius of 4 mm, only a 6 % change in resistivity can be observed. Additionally, the assembled p-type Fe3CoSb12-based flexible device exhibits a power density of 135.7 µW cm-2 under a temperature difference of 100 K with the hot side at 623 K. This work fills a gap in the realization of flexible thermoelectric devices in the medium-to-high-temperature range and holds significant practical application value.

Zinc Doping Induces Enhanced Thermoelectric Performance of Solvothermal SnTe

The creation of hierarchical nanostructures can effectively strengthen phonon scattering to reduce lattice thermal conductivity for improving thermoelectric properties in inorganic solids. Here, we use Zn doping to induce a remarkable reduction in the lattice thermal conductivity in SnTe, approaching the theoretical minimum limit. Microstructure analysis reveals that ZnTe nanoprecipitates can embed within SnTe grains beyond the solubility limit of Zn in the Zn alloyed SnTe. These nanoprecipitates result in a substantial decrease of the lattice thermal conductivity in SnTe, leading to an ultralow lattice thermal conductivity of 0.50 W m-1 K-1 at 773 K and a peak ZT of ~0.48 at 773 K, marking an approximately 45 % enhancement compared to pristine SnTe. This study underscores the effectiveness of incorporating ZnTe nanoprecipitates in boosting the thermoelectric performance of SnTe-based materials.

Dual-Cation CuAgSe-Based Material: Rapid Mass Transfer in Synthesis and High Thermoelectric Performance Realization

Understanding mass transfer mechanisms is vital for developing new material synthesis and densification technologies. Ion transport, serving both mass and charge transfer, is essential for the rapid preparation of high-performance fast ionic conductor thermoelectric materials like Zn4Sb3 and Cu2Q (Q = S, Se). In the case of dual-cation fast ion conductor materials like CuAgSe, exploring the relationship between cation transport becomes pertinent. In this study, copper (Cu) and selenium (Se) undergo a reaction in the presence of an electric field (∼15 A), resulting in the formation of the CuSe compound. Subsequent to this initial reaction, a subsequent thermal environment facilitates the interaction among Cu, CuSe, and Ag2Se, culminating in the rapid formation and densification of CuAgSe (with a relative density exceeding 99%) in just 30 s. Evidently, the diffusion of copper ions substantiates a pivotal role in facilitating mass transfer. As a result, CuAg1+xSe samples with different silver contents (x = 0.01, 0.02, 0.03, 0.04 and 0.05) can effectively inhibit cation vacancy, and introduce highly ordered Ag nanotwins to enhance the electrical transport performance. For CuAg1.04Se, a peak ZT value of 1.0 can be achieved at 673 K, which is comparable to the literatures. This work will guide the future electric field-assisted rapid mass transfer of materials.

Boosting thermoelectric performance of single-walled carbon nanotubes-based films through rational triple treatments

Single-walled carbon nanotubes (SWCNTs)-based thermoelectric materials, valued for their flexibility, lightweight, and cost-effectiveness, show promise for wearable thermoelectric devices. However, their thermoelectric performance requires significant enhancement for practical applications. To achieve this goal, in this work, we introduce rational "triple treatments" to improve the overall performance of flexible SWCNT-based films, achieving a high power factor of 20.29 µW cm-1 K-2 at room temperature. Ultrasonic dispersion enhances the conductivity, NaBH4 treatment reduces defects and enhances the Seebeck coefficient, and cold pressing significantly densifies the SWCNT films while preserving the high Seebeck coefficient. Also, bending tests confirm structural stability and exceptional flexibility, and a six-legged flexible device demonstrates a maximum power density of 2996 μW cm-2 at a 40 K temperature difference, showing great application potential. This advancement positions SWCNT films as promising flexible thermoelectric materials, providing insights into high-performance carbon-based thermoelectrics.

Phase-Transition-Promoted Thermoelectric Textiles Based on Twin Surface-Modified CNT Fibers

With the fast development of new science and technology, wearable devices are in great demand in modern human daily life. However, the energy problem is a long-lasting issue to achieve real smart, wearable, and portable devices. Flexible thermoelectric generators (TEGs) based on thermoelectric conversion systems can convert body waste heat into electricity with excellent flexibility and wearability, which shows a new direction to solving this issue. Here in this work, polyethylenimine (PEI) and gold nanoparticles (Au NPs) twin surface-modified carbon nanotube fibers (CNTFs) were designed and prepared to fabricate thermoelectric textiles (TET) with high performance, good air stability, and high-efficiency power generation. To better utilize the heat emitted by the human body, microencapsulated phase change materials (MPCM) were coated on the hot end of the TET to achieve the phase-transition-promoted TET. MPCM-coated TET device could generate 25.7% more energy than the untreated control device, which indicates the great potential of the phase-transition-promoted TET.

Pseudo-nanostructure and trapped-hole release induce high thermoelectric performance in PbTe

Thermoelectric materials can realize direct and mutual conversion between electricity and heat. However, developing a strategy to improve high thermoelectric performance is challenging because of strongly entangled electrical and thermal transport properties. We demonstrate a case in which both pseudo-nanostructures of vacancy clusters and dynamic charge-carrier regulation of trapped-hole release have been achieved in p-type lead telluride-based materials, enabling the simultaneous regulations of phonon and charge carrier transports. We realized a peak zT value up to 2.8 at 850 kelvin and an average zT value of 1.65 at 300 to 850 kelvin. We also achieved an energy conversion efficiency of ~15.5% at a temperature difference of 554 kelvin in a segmented module. Our demonstration shows promise for mid-temperature thermoelectrics across a range of different applications.

Fully inkjet-printed Ag2Se flexible thermoelectric devices for sustainable power generation

Flexible thermoelectric devices show great promise as sustainable power units for the exponentially increasing self-powered wearable electronics and ultra-widely distributed wireless sensor networks. While exciting proof-of-concept demonstrations have been reported, their large-scale implementation is impeded by unsatisfactory device performance and costly device fabrication techniques. Here, we develop Ag2Se-based thermoelectric films and flexible devices via inkjet printing. Large-area patterned arrays with microscale resolution are obtained in a dimensionally controlled manner by manipulating ink formulations and tuning printing parameters. Printed Ag2Se-based films exhibit (00 l)-textured feature, and an exceptional power factor (1097 μWm-1K-2 at 377 K) is obtained by engineering the film composition and microstructure. Benefiting from high-resolution device integration, fully inkjet-printed Ag2Se-based flexible devices achieve a record-high normalized power (2 µWK-2cm-2) and superior flexibility. Diverse application scenarios are offered by inkjet-printed devices, such as continuous power generation by harvesting thermal energy from the environment or human bodies. Our strategy demonstrates the potential to revolutionize the design and manufacture of multi-scale and complex flexible thermoelectric devices while reducing costs, enabling them to be integrated into emerging electronic systems as sustainable power sources.

Ultraflexible Temperature-Strain Dual-Sensor Based on Chalcogenide Glass-Polymer Film for Human-Machine Interaction

Skin-like thermoelectric (TE) films with temperature- and strain-sensing functions are highly desirable for human-machine interaction systems and wearable devices. However, current TE films still face challenges in achieving high flexibility and excellent sensing performance simultaneously. Herein, for the first time, a facile roll-to-roll strategy is proposed to fabricate an ultraflexible chalcogenide glass-polytetrafluoroethylene composite film with superior temperature- and strain-sensing performance. The unique reticular network of the composite film endows it with efficient Seebeck effect and flexibility, leading to a high Seebeck coefficient (731 µV/K), rapid temperature response (≈0.7 s), and excellent strain sensitivity (gauge factor = 836). Based on this high-performance composite film, an intelligent robotic hand for action feedback and temperature alarm is fabricated, demonstrating its great potential in human-machine interaction. Such TE film fabrication strategy not only brings new inspiration for wearable inorganic TE devices, but also sets the stage for a wide implementation of multifunctional human-machine interaction systems.

High Thermoelectric Power Factors in Plastic/Ductile Bulk SnSe2 -Based Crystals

The recently discovered plastic/ductile inorganic thermoelectric (TE) materials open a new avenue for the fabrication of high-efficiently flexible TE devices, which can utilize the small temperature difference between human body and environment to generate electricity. However, the maximum power factor (PF) of current plastic/ductile TE materials is usually around or less than 10 µW cm-1 K-2 , much lower than the classic brittle TE materials. In this work, a record-high PF of 18.0 µW cm-1 K-2 at 375 K in plastic/ductile bulk SnSe2 -based crystals is reported, superior to all the plastic inorganic TE materials and flexible organic TE materials reported before. The origin of such high PF is from the modulation of material's stacking forms and polymorph crystal structures via simultaneously doping Cl/Br at Se-site and intercalating Cu inside the van der Waals gap, leading to the significantly enhanced carrier concentrations and mobilities. An in-plane fully flexible TE device made of the plastic/ductile SnSe2 -based crystals is successfully developed to show a record-high normalized maximum power density to 0.18 W m-1 under a temperature difference of 30 K. This work indicates that the plastic/ductile material can realize high TE power factor to achieve large output electric power density in flexible TE technology.

Flexible power generators by Ag2Se thin films with record-high thermoelectric performance

Exploring new near-room-temperature thermoelectric materials is significant for replacing current high-cost Bi2Te3. This study highlights the potential of Ag2Se for wearable thermoelectric electronics, addressing the trade-off between performance and flexibility. A record-high ZT of 1.27 at 363 K is achieved in Ag2Se-based thin films with 3.2 at.% Te doping on Se sites, realized by a new concept of doping-induced orientation engineering. We reveal that Te-doping enhances film uniformity and (00l)-orientation and in turn carrier mobility by reducing the (00l) formation energy, confirmed by solid computational and experimental evidence. The doping simultaneously widens the bandgap, resulting in improved Seebeck coefficients and high power factors, and introduces TeSe point defects to effectively reduce the lattice thermal conductivity. A protective organic-polymer-based composite layer enhances film flexibility, and a rationally designed flexible thermoelectric device achieves an output power density of 1.5 mW cm-2 for wearable power generation under a 20 K temperature difference.

Pulse irradiation synthesis of metal chalcogenides on flexible substrates for enhanced photothermoelectric performance

High synthesis temperatures and specific growth substrates are typically required to obtain crystalline or oriented inorganic functional thin films, posing a significant challenge for their utilization in large-scale, low-cost (opto-)electronic applications on conventional flexible substrates. Here, we explore a pulse irradiation synthesis (PIS) to prepare thermoelectric metal chalcogenide (e.g., Bi2Se3, SnSe2, and Bi2Te3) films on multiple polymeric substrates. The self-propagating combustion process enables PIS to achieve a synthesis temperature as low as 150 °C, with an ultrafast reaction completed within one second. Beyond the photothermoelectric (PTE) property, the thermal coupling between polymeric substrates and bismuth selenide films is also examined to enhance the PTE performance, resulting in a responsivity of 71.9 V/W and a response time of less than 50 ms at 1550 nm, surpassing most of its counterparts. This PIS platform offers a promising route for realizing flexible PTE or thermoelectric devices in an energy-, time-, and cost-efficient manner.

Simultaneously Boosting Thermoelectric and Mechanical Properties of n-Type Mg3Sb1.5Bi0.5-Based Zintls through Energy-Band and Defect Engineering

Incorporating donor doping into Mg3Sb1.5Bi0.5 to achieve n-type conductivity is one of the crucial strategies for performance enhancement. In pursuit of higher thermoelectric performance, we herein report co-doping with Te and Y to optimize the thermoelectric properties of Mg3Sb1.5Bi0.5, achieving a peak ZT exceeding 1.7 at 703 K in Y0.01Mg3.19Sb1.5Bi0.47Te0.03. Guided by first-principles calculations for compositional design, we find that Te-doping shifts the Fermi level into the conduction band, resulting in n-type semiconductor behavior, while Y-doping further shifts the Fermi level into the conduction band and reduces the bandgap, leading to enhanced thermoelectric performance with a power factor as high as >20 μW cm-1 K-2. Additionally, through detailed micro/nanostructure characterizations, we discover that Te and Y co-doping induces dense crystal and lattice defects, including local lattice distortions and strains caused by point defects, and densely distributed grain boundaries between nanocrystalline domains. These defects efficiently scatter phonons of various wavelengths, resulting in a low thermal conductivity of 0.83 W m-1 K-1 and ultimately achieving a high ZT. Furthermore, the dense lattice defects induced by co-doping can further strengthen the mechanical performance, which is crucial for its service in devices. This work provides guidance for the composition and structure design of thermoelectric materials.

Nature of Thermal Hysteresis of Thermoelectric Properties in Ag2TexS1-x Compounds

Ag2TexS1-x usually undergo various phase structures upon heating or cooling processes; however, the correlation between the heat treatment, the phase structure, and the physical properties is still a controversy. Herein, three different phases are realized for Ag2TexS1-x (0.35 ≤ x ≤ 0.65) samples during the heat treatment, including the low-temperature crystalline phase, amorphous phase, and high-temperature cubic phase. The metastable amorphous phase is an intermediate phase formed during transition from the high-temperature cubic phase to the low-temperature crystalline phase upon cooling via a solid-state conversion rather than the conventional liquid quenching process. The relative content of these three phases is highly sensitive to the heat treatment process. This as-formed low-temperature crystalline phase, amorphous phase, and high-temperature cubic phase convert into the low-temperature crystalline phase and high-temperature cubic phase through long-time dwelling at the temperature below or above the transition temperature around 567 K, respectively. The status of the low-temperature crystalline phase, amorphous phase, and high-temperature cubic phase significantly affects the thermoelectric properties, resulting in the thermal hysteresis of thermoelectric properties. Below the phase transition temperature (TM), the electrical conductivity of the amorphous phase surpasses that of the low-temperature crystalline phase, which shows a growth of 112% for the Ag2Te0.60S0.40 sample annealed at 823 K in comparison with that of the sample annealed at 473 K. For Ag2Te0.50S0.50 samples annealed at 473 K, the maximum ZT value reaches 1.02 at 623 K during the initial test, while the maximum ZT value is improved to 1.34 at 523 K in the second-round test.

High-Throughput Strategies in the Discovery of Thermoelectric Materials

Searching for new high-performance thermoelectric (TE) materials that are economical and environmentally friendly is an urgent task for TE society, but the advancements are greatly limited by the time-consuming and high cost of the traditional trial-and-error method. The significant progress achieved in the computing hardware, efficient computing methods, advance artificial intelligence algorithms, and rapidly growing material data have brought a paradigm shift in the investigation of TE materials. Many electrical and thermal performance descriptors are proposed and efficient high-throughput (HTP) calculation methods are developed with the purpose to quickly screen new potential TE materials from the material databases. Some HTP experiment methods are also developed which can increase the density of information obtained in a single experiment with less time and lower cost. In addition, machine learning (ML) methods are also introduced in thermoelectrics. In this review, the HTP strategies in the discovery of TE materials are systematically summarized. The applications of performance descriptor, HTP calculation, HTP experiment, and ML in the discovery of new TE materials are reviewed. In addition, the challenges and possible directions in future research are also discussed.

Low-Power Consumption IGZO Memristor-Based Gas Sensor Embedded in an Internet of Things Monitoring System for Isopropanol Alcohol Gas

Low-power-consumption gas sensors are crucial for diverse applications, including environmental monitoring and portable Internet of Things (IoT) systems. However, the desorption and adsorption characteristics of conventional metal oxide-based gas sensors require supplementary equipment, such as heaters, which is not optimal for low-power IoT monitoring systems. Memristor-based sensors (gasistors) have been investigated as innovative gas sensors owing to their advantages, including high response, low power consumption, and room-temperature (RT) operation. Based on IGZO, the proposed isopropanol alcohol (IPA) gas sensor demonstrates a detection speed of 105 s and a high response of 55.15 for 50 ppm of IPA gas at RT. Moreover, rapid recovery to the initial state was achievable in 50 μs using pulsed voltage and without gas purging. Finally, a low-power circuit module was integrated for wireless signal transmission and processing to ensure IoT compatibility. The stability of sensing results from gasistors based on IGZO has been demonstrated, even when integrated into IoT systems. This enables energy-efficient gas analysis and real-time monitoring at ~0.34 mW, supporting recovery via pulse bias. This research offers practical insights into IoT gas detection, presenting a wireless sensing system for sensitive, low-powered sensors.

Thermoelectric Properties of Mg3(Bi,Sb)2 under Finite Temperatures and Pressures: A First-Principles Study

Mg3Bi2-vSbv (0 ≤ v ≤ 2) is a class of promising thermoelectric materials that have a high thermoelectric performance around room temperatures, whereas their thermoelectric properties under pressures and temperatures are still illusive. In this study, we examined the influence of pressure, temperature, and carrier concentration on the thermoelectric properties of Mg3Bi2-vSbv using first-principle calculations accompanied with Boltzmann transport equations method. There is a decrease in the lattice thermal conductivity of Mg3Sb2 (i.e., v = 2) with increasing pressure. For a general Mg3Bi2-vSbv system, power factors are more effectively improved by n-type doping where electrons are the primary carriers over holes in n-type doping, and can be further enhanced by applied pressure. The figure of merit (zT) exhibits a positive correlation with temperature. A high zT value of 1.53 can be achieved by synergistically tuning the temperature, pressure, and carrier concentration in Mg3Sb2. This study offers valuable insights into the tailoring and optimization of the thermoelectric properties of Mg3Bi2-vSbv.

Modulation of the morphotropic phase boundary for high-performance ductile thermoelectric materials

The flexible thermoelectric technique, which can convert heat from the human body to electricity via the Seebeck effect, is expected to provide a peerless solution for the power supply of wearables. The recent discovery of ductile semiconductors has opened a new avenue for flexible thermoelectric technology, but their power factor and figure-of-merit values are still much lower than those of classic thermoelectric materials. Herein, we demonstrate the presence of morphotropic phase boundary in Ag2Se-Ag2S pseudobinary compounds. The morphotropic phase boundary can be freely tuned by adjusting the material thermal treatment processes. High-performance ductile thermoelectric materials with excellent power factor (22 μWcm-1 K-2) and figure-of-merit (0.61) values are realized near the morphotropic phase boundary at 300 K. These materials perform better than all existing ductile inorganic semiconductors and organic materials. Furthermore, the in-plane flexible thermoelectric device based on these high-performance thermoelectric materials demonstrates a normalized maximum power density reaching 0.26 Wm-1 under a temperature gradient of 20 K, which is at least two orders of magnitude higher than those of flexible organic thermoelectric devices. This work can greatly accelerate the development of flexible thermoelectric technology.

Densification Induced Decoupling of Electrical and Thermal Properties in Free-Standing MWCNT Films for Ultrahigh p- and n-Type Power Factors and Enhanced ZT

Generating sufficient power from waste heat is one of the most important things for thermoelectric (TE) techniques in numerous practical applications. The output power density of an organic thermoelectric generator (OTEG) is proportional to the power factors (PFs) and the electrical conductivities of organic materials. However, it is still challenging to have high PFs over 1 mW m-1  K-2 in free-standing films together with high electrical conductivities over 1000 S cm-1 . Herein, densifying multi-walled carbon nanotube (MWCNT) films would increase their electrical conductivity dramatically up to over 10 000 S cm-1 with maintained high Seebeck coefficients >60 µV K-1 , thus leading to ultrahigh PFs of 7.25 and 4.34 mW m-1  K-2 for p- and n-type MWCNT films, respectively. In addition, it is interesting to notice that the electrical properties increase faster than the thermal conductivities, resulting in enhanced ZT of 3.6 times in MWCNT films. An OTEG made of compressed MWCNT films is fabricated to demonstrate the heat-to-electricity conversion ability, which exhibits a high areal output power of ∼12 times higher than that made of pristine MWCNT films. This work demonstrates an effective way to high-performance nanowire/nanoparticle-based TE materials such as printable TE materials comprised of nanowires/nanoparticles.

Flexible Carbon Nanotube-Epitaxially Grown Nanocrystals for Micro-Thermoelectric Modules

Flexible thermoelectric materials have attracted increasing interest because of their potential use in thermal energy harvesting and high-spatial-resolution thermal management. However, a high-performance flexible micro-thermoelectric device (TED) compatible with the microelectronics fabrication process has not yet been developed. Here a universal epitaxial growth strategy is reported guided by 1D van der Waals-coupling, to fabricate freestanding and flexible hybrids comprised of single-wall carbon nanotubes and ordered (Bi,Sb)2 Te3 nanocrystals. High power factors ranging from ≈1680 to ≈1020 µW m-1 K-2 in the temperature range of 300-480 K, combined with a low thermal conductivity yield a high average figure of merit of ≈0.81. The fabricated flexible micro-TED module consisting of two p-n couples of freestanding thermoelectric hybrids has an unprecedented open circuit voltage of ≈22.7 mV and a power density of ≈0.36 W cm-2 under ≈30 K temperature difference, and a net cooling temperature of ≈22.4 K and a heat absorption density of ≈92.5 W cm-2 .

General Figures of Merit ZQ for Thermoelectric Generators Under Constant Heat-In Flux Boundary

The thermoelectric figure of merit ZT bridges the efficiency and material parameters for a thermoelectric device operating under constant temperature of the hot- and cold-source thermal boundary (Type-I TB). However, many application scenarios fall under the constant heat-in flux (qh ) and constant cold-source temperature (Tc ) thermal boundary (Type-II TB), for which a figure of merit is absent for more than half a century. This study aims to fill this gap and propose a figure of merit ZQD for the thermoelectric devices under the Type-II TB condition, defined asZ Q D = ( Z T c Z T c + 1 ) ( h κ ) ( q h T c ) $Z{Q}_{\mathrm{D}} = ( {\frac{{Z{T}_{\mathrm{c}}}}{{Z{T}_{\mathrm{c}} + 1}}} )( {\frac{h}{\kappa }} )( {\frac{{{q}_{\mathrm{h}}}}{{{T}_{\mathrm{c}}}}} )$ , where Z, h, and κ are the traditional figure of merit, leg height, and thermal conductivity, respectively. The effectiveness of ZQD is verified through both numerical calculations and experiments, which are more accurate and practical than ZT. Furthermore, a system-level figure of merit ZQS is suggested after considering the external thermal resistance. Finally, optimization strategies for thermoelectric systems based on ZQS are proposed, showing a 30% enhancement in the efficiency. ZQD and ZQS are expected to be widely used in the thermoelectric field.

Evolution of Thermoelectric Generators: From Application to Hybridization

Considerable thermal energy is emitted into the environment from human activities and equipment operation in the course of daily production. Accordingly, the use of thermoelectric generators (TEGs) can attract wide interest, and it shows high potential in reducing energy waste and increasing energy recovery rates. Notably, TEGs have aroused rising attention and been significantly boosted over the past few years, as the energy crisis has worsened. The reason for their progress is that thermoelectric generators can be easily attached to the surface of a heat source, converting heat energy directly into electricity in a stable and continuous manner. In this review, applications in wearable devices, and everyday life are reviewed according to the type of structure of TEGs. Meanwhile, the latest progress of TEGs' hybridization with triboelectric nanogenerator (TENG), piezoelectric nanogenerator (PENG), and photovoltaic effect is introduced. Moreover, prospects and suggestions for subsequent research work are proposed. This review suggests that hybridization of energy harvesting, and flexible high-temperature thermoelectric generators are the future trends.

Enabling giant thermopower by heterostructure engineering of hydrated vanadium pentoxide for zinc ion thermal charging cells

Flexible power supply devices provide possibilities for wearable electronics in the Internet of Things. However, unsatisfying capacity or lifetime of typical batteries or capacitors seriously limit their practical applications. Different from conventional heat-to-electricity generators, zinc ion thermal charging cells has been a competitive candidate for the self-power supply solution, but the lack of promising cathode materials has restricted the achievement of promising performances. Herein, we propose an attractive cathode material by rational heterostructure engineering of hydrated vanadium pentoxide. Owing to the integration of thermodiffusion and thermoextraction effects, the thermopower is significantly improved from 7.8 ± 2.6 mV K-1 to 23.4 ± 1.5 mV K-1. Moreover, an impressive normalized power density of 1.9 mW m-2 K-2 is achieved in the quasi-solid-state cells. In addition, a wearable power supply constructed by three units can drive the commercial health monitoring system by harvesting body heat. This work demonstrates the effectiveness of electrodes design for wearable thermoelectric applications.

Anisotropic ductility and thermoelectricity of van der Waals GeAs

Wearable thermoelectric applications require materials with both high energy conversion efficiency and excellent flexibility/deformability. Inorganic thermoelectric materials have shown high conversion efficiency, but they are usually brittle and have poor mechanical flexibility, which makes their integration into flexible devices a challenging task. GeAs is a group IV-V binary compound with a van der Waals layered structure, and its thermoelectric response has been reported. Herein, we investigate the mechanical and thermoelectric properties of GeAs crystal by a combination of density functional theory and density functional perturbation theory methods. Our results show that GeAs features a moderately dispersive valence band and multivalley convergence, which give rise to a large Seebeck coefficient and power factor when it is properly p-doped. Remarkably, its electrical transport in the out-of-plane direction even outperforms that in the in-plane direction, while phonon transport is suppressed, leading to a predominant thermoelectric response in the vertical direction. More interestingly, GeAs demonstrates a structural stiffness higher than thermoelectric CuInTe2 and PbTe, and a ductility ratio comparable to a recently discovered plastic semiconductor, InSe. The stress-strain curve simulation reveals that GeAs can withstand deformations up to 20%. These findings showcase GeAs as a ductile thermoelectric material suitable for wearable devices and energy conversion.

Stretchable Thermoelectric Fibers with Three-Dimensional Interconnected Porous Network for Low-Grade Body Heat Energy Harvesting

Electricity generation from body heat has garnered significant interest as a sustainable power source for wearable bioelectronics. In this work, we report stretchable n-type thermoelectric fibers based on the hybrid of Ti3C2Tx MXene nanoflakes and polyurethane (MP) through a wet-spinning process. The proposed fibers are designed with a 3D interconnected porous network to achieve satisfactory electrical conductivity (σ), thermal conductivity (κ), and stretchability simultaneously. We systematically optimize the thermoelectric and mechanical traits of the MP fibers and the MP-60 (with 60 wt % MXene content) exhibits a high σ of 1.25 × 103 S m-1, an n-type Seebeck coefficient of -8.3 μV K-1, and a notably low κ of 0.19 W m-1 K-1. Additionally, the MP-60 fibers possess great stretchability and mechanical strength with a tensile strain of 434% and a breaking stress of 11.8 MPa. Toward practical application, a textile thermoelectric generator is constructed based on the MP-60 fibers and achieves a voltage of 3.6 mV with a temperature gradient between the body skin and ambient environment, highlighting the enormous potential of low-grade body heat energy harvesting.