A nanofibrous encapsulation device for safe delivery of insulin-producing cells to treat type 1 diabetes

Human amniotic mesenchymal stem cell-islet organoids enhance the efficiency of islet engraftment in a mouse diabetes model

AIMS

Despite islet transplantation has proved a great potential to become the standard therapy for type 1 diabetes mellitus (T1DM), this approach remains limited by ischemia, hypoxia, and poor revascularization in early post-transplant period as well as inflammation and life-long host immune rejection. Here, we investigate the potential and mechanism of human amniotic mesenchymal stem cells (hAMSCs)-islet organoid to improve the efficiency of islet engraftment in immunocompetent T1DM mice.

MAIN METHODS

We generated the hAMSC-islet organoid structure through culturing the mixture of hAMSCs and islets on 3-dimensional-agarose microwells. Flow cytometry, whole-body fluorescent imaging, immunofluorescence, Calcein-AM/PI staining, ELISA, and qPCR were used to assess the potential and mechanism of shielding hAMSCs to improve the efficiency of islet transplantation.

KEY FINDINGS

Transplant of hAMSC-islet organoids results in remarkably better glycemic control, an enhanced glucose tolerance, and a higher β cell mass in vivo compared with control islets. Our results show that hAMSCs shielding provides an immune privileged microenvironment for islets and promotes graft revascularization in vivo. In addition, hAMSC-islet organoids show higher viability and reduced dysfunction after exposure to hypoxia and inflammatory cytokines in vitro. Finally, our results show that shielding with hAMSCs leads to the activation of PKA-CREB-IRS2-PI3K and PKA-PDX1 signaling pathways, up-regulation of SIL1 mRNA levels, and down-regulation of MT1 mRNA levels in β cells, which ultimately promotes the synthesis, folding and secretion of insulin, respectively.

SIGNIFICANCE

hAMSC-islet organoids can evidently increase the efficiency of islet engraftment and might develop into a promising alternative for the clinical treatment of T1DM.

Mechanically reinforced hydrogel vehicle delivering angiogenic factor for beta cell therapy

Type 1 diabetes mellitus (T1DM) is a chronic disease affecting millions worldwide. Insulin therapy is currently the golden standard for treating T1DM; however, it does not restore the normal glycaemic balance entirely, which increases the risk of secondary complications. Beta-cell therapy may be a possible way of curing T1DM and has already shown promising results in the clinic. However, low retention rates, poor cell survival, and limited therapeutic potential are ongoing challenges, thus increasing the need for better cell encapsulation devices. This study aimed to develop a mechanically reinforced vascular endothelial growth factor (VEGF)-delivering encapsulation device suitable for beta cell encapsulation and transplantation. Poly(l-lactide-co-ε-caprolactone) (PLCL)/gelatin methacryloyl (GelMA)/alginate coaxial nanofibres were produced using electrospinning and embedded in an alginate hydrogel. The encapsulation device was physically and biologically characterised and was found to be suitable for INS-1E beta cell encapsulation, vascularization, and transplantation in terms of its biocompatibility, porosity, swelling ratio and mechanical properties. Lastly, VEGF was incorporated into the hydrogel and the release kinetics and functional studies revealed a sustained release of bioactive VEGF for at least 14 days, making the modified alginate system a promising candidate for improving the beta cell survival after transplantation.

An Autoclavable and Transparent Thermal Cutter for Reliably Sealing Wet Nanofibrous Membranes

Sealing wet porous membranes is a major challenge when fabricating cell encapsulation devices. Herein, we report the development of an Autoclavable Transparent Thermal Cutter (ATTC) for reliably sealing wet nanofibrous membranes. Notably, the ATTC is autoclavable and transparent, thus enabling in situ visualization of the sealing process in a sterile environment and ensuring an appropriate seal. In addition, the ATTC could generate smooth, arbitrary-shaped sealing ends with excellent mechanical properties when sealing PA6, PVDF, and TPU nanofibrous tubes and PP microporous membranes. Importantly, the ATTC could reliably seal wet nanofibrous tubes, which can shoulder a burst pressure up to 313.2 ± 19.3 kPa without bursting at the sealing ends. Furthermore, the ATTC sealing process is highly compatible with the fabrication of cell encapsulation devices, as verified by viability, proliferation, cell escape, and cell function tests. We believe that the ATTC could be used to reliably seal cell encapsulation devices with minimal side effects.

Hydrogel-based approaches to target hypersensitivity mechanisms underlying autoimmune disease

A robust adaptive immune response is essential for combatting pathogens. In the wrong context such as due to genetic and environmental factors, however, the same mechanisms crucial for self-preservation can lead to a loss of self-tolerance. Resulting autoimmunity manifests in the development of a host of organ-specific or systemic autoimmune diseases, hallmarked by aberrant immune responses and tissue damage. The prevalence of autoimmune diseases is on the rise, medical management of which focuses primarily on pharmacological immunosuppression that places patients at a risk of side effects, including opportunistic infections and tumorigenesis. Biomaterial-based drug delivery systems confer many opportunities to address challenges associated with conventional disease management. Hydrogels, in particular, can protect encapsulated cargo (drug or cell therapeutics) from the host environment, afford their presentation in a controlled manner, and can be tailored to respond to disease conditions or support treatment via multiplexed functionality. Moreover, localized delivery to affected sites by these approaches has the potential to concentrate drug action at the site, reduce off-target exposure, and enhance patient compliance by reducing the need for frequent administration. Despite their many benefits for the management of autoimmune disease, such biomaterial-based approaches focus largely on the downstream effects of hypersensitivity mechanisms and have a limited capacity to eradicate the disease. In contrast, direct targeting of mechanisms of hypersensitivity reactions uniquely enables prophylaxis or the arrest of disease progression by mitigating the basis of autoimmunity. One promising approach is to induce self-antigen-specific tolerance, which specifically subdues damaging autoreactivity while otherwise retaining the normal immune responses. In this review, we will discuss hydrogel-based systems for the treatment of autoimmune disease, with a focus on those that target hypersensitivity mechanisms head-on. As the field continues to advance, it will expand the range of therapeutic choices for people coping with autoimmune diseases, providing fresh prospects for better clinical outcomes and improved quality of life.

An elastomer with in situ generated pure zwitterionic surfaces for fibrosis-resistant implants

Polymeric elastomers are widely utilized in implantable biomedical devices. Nevertheless, the implantation of these elastomers can provoke a robust foreign body response (FBR), leading to the rejection of foreign implants and consequently reducing their effectiveness in vivo. Building effective anti-FBR coatings on those implants remains challenging. Herein, we introduce a coating-free elastomer with superior immunocompatibility. A super-hydrophilic anti-fouling zwitterionic layer can be generated in situ on the surface of the elastomer through a simple chemical trigger. This elastomer can repel the adsorption of proteins, as well as the adhesion of cells, platelets, and diverse microbes. The elastomer elicited negligible inflammatory responses after subcutaneous implantation in rodents for 2 weeks. No apparent fibrotic capsule formation was observed surrounding the elastomer after 6 months in rodents. Continuous subcutaneous insulin infusion (CSII) catheters constructed from the elastomer demonstrated prolonged longevity and performance compared to commercial catheters, indicating its great potential for enhancing and extending the performance of various implantable biomedical devices by effectively attenuating local immune responses. STATEMENT OF SIGNIFICANCE: The foreign body response remains a significant challenge for implants. Complicated coating procedures are usually needed to construct anti-fibrotic coatings on implantable elastomers. Herein, a coating-free elastomer with superior immunocompatibility was achieved using a zwitterionic monomer derivative. A pure zwitterionic layer can be generated on the elastomer surface through a simple chemical trigger. This elastomer significantly reduces protein adsorption, cell and bacterial adhesion, and platelet activation, leading to minimal fibrotic capsule formation even after six months of subcutaneous implantation in rodents. CSII catheters constructed from the PQCBE-H elastomer demonstrated prolonged longevity and performance compared to commercial catheters, highlighting the significant potential of PQCBE-H elastomers for enhancing and extending the performance of various implantable biomedical devices.

Identification of unique cell type responses in pancreatic islets to stress

Diabetes involves the death or dysfunction of pancreatic β-cells. Analysis of bulk sequencing from human samples and studies using in vitro and in vivo models suggest that endoplasmic reticulum and inflammatory signaling play an important role in diabetes progression. To better characterize cell type-specific stress response, we perform multiplexed single-cell RNA sequencing to define the transcriptional signature of primary human islet cells exposed to endoplasmic reticulum and inflammatory stress. Through comprehensive pair-wise analysis of stress responses across pancreatic endocrine and exocrine cell types, we define changes in gene expression for each cell type under different diabetes-associated stressors. We find that β-, α-, and ductal cells have the greatest transcriptional response. We utilize stem cell-derived islets to study islet health through the candidate gene CIB1, which was upregulated under stress in primary human islets. Our findings provide insights into cell type-specific responses to diabetes-associated stress and establish a resource to identify targets for diabetes therapeutics.

iPS cell therapy 2.0: Preparing for next-generation regenerative medicine

This year marks the tenth anniversary of the world's first transplantation of tissue generated from induced pluripotent stem cells (iPSCs). There is now a growing number of clinical trials worldwide examining the efficacy and safety of autologous and allogeneic iPSC-derived products for treating various pathologic conditions. As we patiently wait for the results from these and future clinical trials, it is imperative to strategize for the next generation of iPSC-based therapies. This review examines the lessons learned from the development of another advanced cell therapy, chimeric antigen receptor (CAR) T cells, and the possibility of incorporating various new bioengineering technologies in development, from RNA engineering to tissue fabrication, to apply iPSCs not only as a means to achieve personalized medicine but also as designer medical applications.

Enhancing Therapeutic Insulin Transport from Macroencapsulated Islets Using Sub-Minute Pressure at Physiological Levels

Cadaveric islet and stem cell-derived transplantations hold promise as treatments for type 1 diabetes. To tackle the issue of immunocompatibility, numerous cellular macroencapsulation techniques have been developed that utilize diffusion to transport insulin across an immunoisolating barrier. However, despite several devices progressing to human clinical trials, none have successfully managed to attain physiologic glucose control or insulin independence. Based on empirical evidence, macroencapsulation methods with multilayered, high islet surface density are incompatible with homeostatic, on-demand insulin delivery and physiologic glucose regulation, when reliant solely on diffusion. An additional driving force is essential to overcome the distance limit of diffusion. In this study, we present both theoretical proof and experimental validation that applying pressure at levels comparable to physiological diastolic blood pressure significantly enhances insulin flux across immunoisolation membranes-increasing it by nearly three orders of magnitude. This significant enhancement in transport rate allows for precise, sub-minute regulation of both bolus and basal insulin delivery. By incorporating this technique with a pump-based extravascular system, we demonstrate the ability to rapidly reduce glucose levels in diabetic rodent models, effectively replicating the timescale and therapeutic effect of subcutaneous insulin injection or infusion. This advance provides a potential path towards achieving insulin independence with islet macroencapsulation.

One Sentence Summary

Towards improved glucose control, applying sub-minute pressure at physiological levels enhances therapeutic insulin transport from macroencapsulated islets.

Immunoprotection Strategies in β-Cell Replacement Therapy: A Closer Look at Porcine Islet Xenotransplantation

Type 1 diabetes mellitus (T1DM) is characterized by absolute insulin deficiency primarily due to autoimmune destruction of pancreatic β-cells. The prevailing treatment for T1DM involves daily subcutaneous insulin injections, but a substantial proportion of patients face challenges such as severe hypoglycemic episodes and poorly controlled hyperglycemia. For T1DM patients, a more effective therapeutic option involves the replacement of β-cells through allogeneic transplantation of either the entire pancreas or isolated pancreatic islets. Unfortunately, the scarcity of transplantable human organs has led to a growing list of patients waiting for an islet transplant. One potential alternative is xenotransplantation of porcine pancreatic islets. However, due to inter-species molecular incompatibilities, porcine tissues trigger a robust immune response in humans, leading to xenograft rejection. Several promising strategies aim to overcome this challenge and enhance the long-term survival and functionality of xenogeneic islet grafts. These strategies include the use of islets derived from genetically modified pigs, immunoisolation of islets by encapsulation in biocompatible materials, and the creation of an immunomodulatory microenvironment by co-transplanting islets with accessory cells or utilizing immunomodulatory biomaterials. This review concentrates on delineating the primary obstacles in islet xenotransplantation and elucidates the fundamental principles and recent breakthroughs aimed at addressing these challenges.

Unlocking Transplant Tolerance with Biomaterials

For patients suffering from organ failure due to injury or autoimmune disease, allogeneic organ transplantation with chronic immunosuppression is considered the god standard in terms of clinical treatment. However, the true "holy grail" of transplant immunology is operational tolerance, in which the recipient exhibits a sustained lack of alloreactivity toward unencountered antigen presented by the donor graft. This outcome is resultant from critical changes to the phenotype and genotype of the immune repertoire predicated by the activation of specific signaling pathways responsive to soluble and mechanosensitive cues. Biomaterials have emerged as a medium for interfacing with and reprogramming these endogenous pathways toward tolerance in precise, minimally invasive, and spatiotemporally defined manners. By viewing seminal and contemporary breakthroughs in transplant tolerance induction through the lens of biomaterials-mediated immunomodulation strategies-which include intrinsic material immunogenicity, the depot effect, graft coatings, induction and delivery of tolerogenic immune cells, biomimicry of tolerogenic immune cells, and in situ reprogramming-this review emphasizes the stunning diversity of approaches in the field and spotlights exciting future directions for research to come.

Pancreatic islet transplantation: current advances and challenges

Diabetes is a prevalent chronic disease that traditionally requires severe reliance on medication for treatment. Oral medication and exogenous insulin can only temporarily maintain blood glucose levels and do not cure the disease. Most patients need life-long injections of exogenous insulin. In recent years, advances in islet transplantation have significantly advanced the treatment of diabetes, allowing patients to discontinue exogenous insulin and avoid complications.Long-term follow-up results from recent reports on islet transplantation suggest that they provide significant therapeutic benefit although patients still require immunotherapy, suggesting the importance of future transplantation strategies. Although organ shortage remains the primary obstacle for the development of islet transplantation, new sources of islet cells, such as stem cells and porcine islet cells, have been proposed, and are gradually being incorporated into clinical research. Further research on new transplantation sites, such as the subcutaneous space and mesenteric fat, may eventually replace the traditional portal vein intra-islet cell infusion. Additionally, the immunological rejection reaction in islet transplantation will be resolved through the combined application of immunosuppressant agents, islet encapsulation technology, and the most promising mesenchymal stem cells/regulatory T cell and islet cell combined transplantation cell therapy. This review summarizes the progress achieved in islet transplantation, and discusses the research progress and potential solutions to the challenges faced.

The efficiency of stem cell differentiation into functional beta cells for treating insulin-requiring diabetes: Recent advances and current challenges

In recent years, the potential of stem cells (SCs) to differentiate into various types of cells, including β-cells, has led to a significant boost in development. The efficiency of this differentiation process and the functionality of the cells post-transplantation are crucial factors for the success of stem cell therapy in diabetes. Herein, this article reviews the current advances and challenges faced by stem cell differentiation into functional β-cells for diabetes treatment. In vitro, researchers have sought to enhance the differentiation efficiency of functional β-cells by mimicking the normal pancreatic development process, using gene manipulation, pharmacological and culture conditions stimulation, three-dimensional (3D) and organoid culture, or sorting for functional β-cells based on mature islet cell markers. Furthermore, in vivo studies have also looked at suitable transplantation sites, the enhancement of the transplantation microenvironment, immune modulation, and vascular function reconstruction to improve the survival rate of functional β-cells, thereby enhancing the treatment of diabetes. Despite these advancements, developing stem cells to produce functional β-cells for efficacious diabetes treatment is a continuous research endeavor requiring significant multidisciplinary collaboration, for the stem-cell-derived beta cells to evolve into an effective cellular therapy.

Encapsulation and immune protection for type 1 diabetes cell therapy

Type 1 Diabetes (T1D) involves the autoimmune destruction of insulin-producing β-cells in the pancreas. Exogenous insulin injections are the current therapy but are user-dependent and cannot fully recapitulate physiological insulin secretion dynamics. Since the emergence of allogeneic cell therapy for T1D, the Edmonton Protocol has been the most promising immunosuppression protocol for cadaveric islet transplantation, but the lack of donor islets, poor cell engraftment, and required chronic immunosuppression have limited its application as a therapy for T1D. Encapsulation in biomaterials on the nano-, micro-, and macro-scale offers the potential to integrate islets with the host and protect them from immune responses. This method can be applied to different cell types, including cadaveric, porcine, and stem cell-derived islets, mitigating the issue of a lack of donor cells. This review covers progress in the efforts to integrate insulin-producing cells from multiple sources to T1D patients as a form of cell therapy.

Recent Advances in Alginate-Based Hydrogels for Cell Transplantation Applications

With its exceptional biocompatibility, alginate emerged as a highly promising biomaterial for a large range of applications in regenerative medicine. Whether in the form of microparticles, injectable hydrogels, rigid scaffolds, or bioinks, alginate provides a versatile platform for encapsulating cells and fostering an optimal environment to enhance cell viability. This review aims to highlight recent studies utilizing alginate in diverse formulations for cell transplantation, offering insights into its efficacy in treating various diseases and injuries within the field of regenerative medicine.

Emerging Strategies for Beta Cell Encapsulation for Type 1 Diabetes Therapy

Diabetes is a prevalent chronic disease affecting millions of people globally. To address this health challenge, advanced beta cell therapy using biomaterials-based macroscale, microscale, and nanoscale encapsulation devices must tackle various obstacles. First, overcoming foreign body responses is a major focus of research. Strategies such as immunomodulatory materials and physical immunoshielding are investigated to reduce the immune response and improve the longevity of the encapsulated cells. Furthermore, oxygenating strategies, such as the use of oxygen-releasing biomaterials, are developed to improve oxygen diffusion and promote cell survival. Finally, yet importantly, promoting vascularization through the use of angiogenic growth factors and the incorporation of pre-vascularized materials are also explored to enhance nutrient and oxygen supply to the encapsulated cells. This review seeks to specifically highlight the emerging research strategies developed to overcome these challenges using micro and nanoscale biomaterial encapsulation devices. Continuously improving and refining these strategies make an advance toward realizing the improved therapeutic potential of the encapsulated beta cells.

Hydrogel-Composited Laminate for Islet Immune-Isolation to Treat Type 1 Diabetes

Challenges remain to be solved for the clinical translation of β-cell encapsulation technology in the treatment of type 1 diabetes (T1D). Successful delivery of β cells urgently needs the development of an encapsulation device with a thin dimension and rapid mass transport that offers stable immune isolation and complete retrieval. In this study, we focus on a laminate in which an islet-embedding alginate hydrogel layer (Alg) is sandwiched between two polymer layers (polyether sulfone, PES). Mechanical support by the PES layer protects the alginate from disintegrating after implantation and allows complete retrieval. The multilayered device has a thin membrane configuration (∼1 mm), and the edge of the laminate and the gaps between Alg and PES offer a semiopen structure that could be more permeable to molecules compared with the closed pocket of conventional macroencapsulation. Islets are suspended in the alginate solution and then encapsulated in the hydrogel layer in the middle of the laminate after gelation. Encapsulating syngeneic or xenogeneic islets in the laminate device corrected chemically induced T1D in mice for over 90 days in both the intraperitoneal space and the epididymal fat pad. The multilayered membrane system may therefore provide a translatable solution in β cell-transplantation therapy in T1D.

Silencing hsa_circ_0032449 inhibits the pancreatic differentiation of human embryonic stem cells via the hsa_miR-195-5p/CCND1/PI3K/AKT signaling pathway

Stem cell-derived β cells (SC-β cells) differentiated from stem cell-derived pancreatic progenitor (PP) cells are promising tools for enabling normal glucose control of islet transplants and have therapeutic potential for type 1 diabetes treatment. Pancreatic specification is essential for SC-β cell induction in vitro and low-quality PP cells may convert into derivatives of non-pancreatic lineages both in vivo and in vitro, impeding PP-derived β cell safety and differentiation efficiency. Circular RNA (circRNA) commonly determines the fate of stem cells by acting as competing endogenous RNA (ceRNA). Currently, the relationships between endogenous circRNA and pancreatic specification remain elusive. Herein, we used whole transcriptome sequencing analysis and functional experiments to reveal that deficiency of hsa_circ_0032449 resulted in posterior foregut-derived PP cells with a weakened the progenitor state with decreased expression of PDX1, NKX6.1 and CCND1. As differentiation processed into maturation, silencing of hsa_circ_0032449 suppressed PP cell development into functionally mature and glucose-responsive SC-β cells. These SC-β cells exhibited lower serum C-peptide levels compared with those of control groups in nude mice and had difficulties in reversing hyperglycemia in STZ-induced diabetic nude mice. Mechanistically, loss of hsa_circ_0032449 participated in PI3K-AKT signaling transduction by acting as a ceRNA to sponge miR-195-5p and by influencing the expression of the downstream target CCND1 at transcription and translation levels. Overall, our findings identified hsa_circ_0032449 as an essential PP cell-fate specification regulator, indicating a promising potential in clinical applications and basic research.

Looking to the Future: Drug Delivery and Targeting in the Prophylaxis and Therapy of Severe and Chronic Diseases

High molecular weight actives and cell-based therapy have the potential to revolutionize the prophylaxis and therapy of severe diseases. Yet, the size and nature of the agents - proteins, nucleic acids, cells - challenge drug delivery and thus formulation development. Moreover, off-target effects may result in severe adverse drug reactions. This makes delivery and targeting an essential component of high-end drug development. Loading to nanoparticles facilitates delivery and enables targeted mRNA vaccines and tumor therapeutics. Stem cell therapy opens up a new horizon in diabetes type 1 among other domains which may enhance the quality of life and life expectancy. Cell encapsulation protects transplants against the recipient's immune system, may ensure long-term efficacy, avoid severe adverse reactions, and simplify the management of rare and fatal diseases.The knowledge gained so far encourages to widen the spectrum of potential indications. Co-development of the active agent and the vehicle has the potential to accelerate drug research. One recommended starting point is the use of computational approaches. Transferability of preclinical data to humans will benefit from performing studies first on validated human 3D disease models reflecting the target tissue, followed by studies on validated animal models. This makes approaching a new level in drug development a multidisciplinary but ultimately worthwhile and attainable challenge. Intense monitoring of the patients after drug approval and periodic reporting to physicians and scientists remain essential for the safe use of drugs especially in rare diseases and pave future research.

Inflammation-induced subcutaneous neovascularization for the long-term survival of encapsulated islets without immunosuppression

Cellular therapies for type-1 diabetes can leverage cell encapsulation to dispense with immunosuppression. However, encapsulated islet cells do not survive long, particularly when implanted in poorly vascularized subcutaneous sites. Here we show that the induction of neovascularization via temporary controlled inflammation through the implantation of a nylon catheter can be used to create a subcutaneous cavity that supports the transplantation and optimal function of a geometrically matching islet-encapsulation device consisting of a twisted nylon surgical thread coated with an islet-seeded alginate hydrogel. The neovascularized cavity led to the sustained reversal of diabetes, as we show in immunocompetent syngeneic, allogeneic and xenogeneic mouse models of diabetes, owing to increased oxygenation, physiological glucose responsiveness and islet survival, as indicated by a computational model of mass transport. The cavity also allowed for the in situ replacement of impaired devices, with prompt return to normoglycemia. Controlled inflammation-induced neovascularization is a scalable approach, as we show with a minipig model, and may facilitate the clinical translation of immunosuppression-free subcutaneous islet transplantation.

Hypoxia within subcutaneously implanted macroencapsulation devices limits the viability and functionality of densely loaded islets

Introduction

Subcutaneous macroencapsulation devices circumvent disadvantages of intraportal islet therapy. However, a curative dose of islets within reasonably sized devices requires dense cell packing. We measured internal PO2 of implanted devices, mathematically modeled oxygen availability within devices and tested the predictions with implanted devices containing densely packed human islets.

Methods

Partial pressure of oxygen (PO2) within implanted empty devices was measured by noninvasive 19F-MRS. A mathematical model was constructed, predicting internal PO2, viability and functionality of densely packed islets as a function of external PO2. Finally, viability was measured by oxygen consumption rate (OCR) in day 7 explants loaded at various islet densities.

Results

In empty devices, PO2 was 12 mmHg or lower, despite successful external vascularization. Devices loaded with human islets implanted for 7 days, then explanted and assessed by OCR confirmed trends proffered by the model but viability was substantially lower than predicted. Co-localization of insulin and caspase-3 immunostaining suggested that apoptosis contributed to loss of beta cells.

Discussion

Measured PO2 within empty devices declined during the first few days post-transplant then modestly increased with neovascularization around the device. Viability of islets is inversely related to islet density within devices.

Transplantable cell-encapsulation device using a semipermeable ethylene-vinyl alcohol copolymer membrane in a mouse diabetic model

Cell-based therapy is an attractive approach, and encapsulation of therapeutic cells is a promising strategy because it prevents immune responses and allows transplanted cells to be retrieved in case of dysfunction. Bioartificial pancreas, in which insulin-secreting cells are encapsulated in a semipermeable membrane bag, is a new class of medical device for treating type-I diabetes. In this study, we developed a macroencapsulation device in which the pancreatic beta cell line MIN6 was encapsulated in a semipermeable bag made of an ethylene-vinyl alcohol copolymer membrane. In vitro evaluation of ATP and insulin levels revealed that MIN6 cells grown in Matrigel within the device secreted insulin in response to glucose levels. Transplantation of the device lowered blood glucose levels for 30 days in diabetic mice. Histological observation revealed that MIN6 cells formed spheroids in Matrigel, and no host cells were detected within the device. Blood levels of inflammatory cytokines in the transplanted mice were similar to those in non-transplanted mice, and antibody levels in the device were lower than those in the intraperitoneal fluid. These results suggest that the semipermeable ethylene-vinyl alcohol copolymer membrane developed in this study is useful for cell encapsulation in cell-based therapies, including beta-cell macroencapsulation for type-1 diabetes.

Solid implantable devices for sustained drug delivery

Implantable drug delivery systems (IDDS) are an attractive alternative to conventional drug administration routes. Oral and injectable drug administration are the most common routes for drug delivery providing peaks of drug concentrations in blood after administration followed by concentration decay after a few hours. Therefore, constant drug administration is required to keep drug levels within the therapeutic window of the drug. Moreover, oral drug delivery presents alternative challenges due to drug degradation within the gastrointestinal tract or first pass metabolism. IDDS can be used to provide sustained drug delivery for prolonged periods of time. The use of this type of systems is especially interesting for the treatment of chronic conditions where patient adherence to conventional treatments can be challenging. These systems are normally used for systemic drug delivery. However, IDDS can be used for localised administration to maximise the amount of drug delivered within the active site while reducing systemic exposure. This review will cover current applications of IDDS focusing on the materials used to prepare this type of systems and the main therapeutic areas of application.

Screening hydrogels for antifibrotic properties by implanting cellularly barcoded alginates in mice and a non-human primate

Screening implantable biomaterials for antifibrotic properties is constrained by the need for in vivo testing. Here we show that the throughput of in vivo screening can be increased by cellularly barcoding a chemically modified combinatorial library of hydrogel formulations. The method involves the implantation of a mixture of alginate formulations, each barcoded with human umbilical vein endothelial cells from different donors, and the association of the identity and performance of each formulation by genotyping single nucleotide polymorphisms of the cells via next-generation sequencing. We used the method to screen 20 alginate formulations in a single mouse and 100 alginate formulations in a single non-human primate, and identified three lead hydrogel formulations with antifibrotic properties. Encapsulating human islets with one of the formulations led to long-term glycaemic control in a mouse model of diabetes, and coating medical-grade catheters with the other two formulations prevented fibrotic overgrowth. High-throughput screening of barcoded biomaterials in vivo may help identify formulations that enhance the long-term performance of medical devices and of biomaterial-encapsulated therapeutic cells.

Enhancing longevity of immunoisolated pancreatic islet grafts by modifying both the intracapsular and extracapsular environment

Type 1 diabetes mellitus (T1DM) is a chronic metabolic disease characterized by autoimmune destruction of pancreatic β cells. Transplantation of immunoisolated pancreatic islets might treat T1DM in the absence of chronic immunosuppression. Important advances have been made in the past decade as capsules can be produced that provoke minimal to no foreign body response after implantation. However, graft survival is still limited as islet dysfunction may occur due to chronic damage to islets during islet isolation, immune responses induced by inflammatory cells, and nutritional issues for encapsulated cells. This review summarizes the current challenges for promoting longevity of grafts. Possible strategies for improving islet graft longevity are also discussed, including supplementation of the intracapsular milieu with essential survival factors, promotion of vascularization and oxygenation near capsules, modulation of biomaterials, and co-transplantation of accessory cells. Current insight is that both the intracapsular as well as the extracapsular properties should be improved to achieve long-term survival of islet-tissue. Some of these approaches reproducibly induce normoglycemia for more than a year in rodents. Further development of the technology requires collective research efforts in material science, immunology, and endocrinology. STATEMENT OF SIGNIFICANCE: Islet immunoisolation allows for transplantation of insulin producing cells in absence of immunosuppression and might facilitate the use of xenogeneic cell sources or grafting of cells obtained from replenishable cell sources. However, a major challenge to date is to create a microenvironment that supports long-term graft survival. This review provides a comprehensive overview of the currently identified factors that have been demonstrated to be involved in either stimulating or reducing islet graft survival in immunoisolating devices and discussed current strategies to enhance the longevity of encapsulated islet grafts as treatment for type 1 diabetes. Although significant challenges remain, interdisciplinary collaboration across fields may overcome obstacles and facilitate the translation of encapsulated cell therapy from the laboratory to clinical application.

New Insights and Potential Therapeutic Interventions in Metabolic Diseases

Endocrine homeostasis and metabolic diseases have been the subject of extensive research in recent years. The development of new techniques and insights has led to a deeper understanding of the mechanisms underlying these conditions and opened up new avenues for diagnosis and treatment. In this review, we discussed the rise of metabolic diseases, especially in Western countries, the genetical, psychological, and behavioral basis of metabolic diseases, the role of nutrition and physical activity in the development of metabolic diseases, the role of single-cell transcriptomics, gut microbiota, epigenetics, advanced imaging techniques, and cell-based therapies in metabolic diseases. Finally, practical applications derived from this information are made.

Stem cells as a therapeutic avenue for active and long-term complications of Necrotizing Enterocolitis

Necrotizing enterocolitis (NEC) is a devastating neonatal intestinal disease associated with significant morbidity and mortality. Although decades of research have been dedicated to understanding the pathogenesis of NEC and developing therapies, it remains the leading cause of death among neonatal gastrointestinal diseases. Mesenchymal stem cells (MSCs) have garnered significant interest recently as potential therapeutic agents for the treatment of NEC. They have been shown to rescue intestinal injury and reduce the incidence and severity of NEC in various preclinical animal studies. MSCs and MSC-derived organoids and tissue engineered small intestine (TESI) have shown potential for the treatment of long-term sequela of NEC such as short bowel syndrome, neurodevelopmental delay, and chronic lung disease. Although the advances made in the use of MSCs are promising, further research is needed prior to the widespread use of these cells for the treatment of NEC.

Single-nucleus multi-omics of human stem cell-derived islets identifies deficiencies in lineage specification

Insulin-producing β cells created from human pluripotent stem cells have potential as a therapy for insulin-dependent diabetes, but human pluripotent stem cell-derived islets (SC-islets) still differ from their in vivo counterparts. To better understand the state of cell types within SC-islets and identify lineage specification deficiencies, we used single-nucleus multi-omic sequencing to analyse chromatin accessibility and transcriptional profiles of SC-islets and primary human islets. Here we provide an analysis that enabled the derivation of gene lists and activity for identifying each SC-islet cell type compared with primary islets. Within SC-islets, we found that the difference between β cells and awry enterochromaffin-like cells is a gradient of cell states rather than a stark difference in identity. Furthermore, transplantation of SC-islets in vivo improved cellular identities overtime, while long-term in vitro culture did not. Collectively, our results highlight the importance of chromatin and transcriptional landscapes during islet cell specification and maturation.

Developments in stem cell-derived islet replacement therapy for treating type 1 diabetes

The generation of islet-like endocrine clusters from human pluripotent stem cells (hPSCs) has the potential to provide an unlimited source of insulin-producing β cells for the treatment of diabetes. In order for this cell therapy to become widely adopted, highly functional and well-characterized stem cell-derived islets (SC-islets) need to be manufactured at scale. Furthermore, successful SC-islet replacement strategies should prevent significant cell loss immediately following transplantation and avoid long-term immune rejection. This review highlights the most recent advances in the generation and characterization of highly functional SC-islets as well as strategies to ensure graft viability and safety after transplantation.

An electrospun macrodevice for durable encapsulation of human cells with consistent secretion of therapeutic antibodies

Frequent subcutaneous or intravenous administrations of therapeutic biomolecules can be costly and inconvenient for patients. Implantation of encapsulated recombinant cells represents a promising approach for the sustained delivery of biotherapeutics. However, foreign body and fibrotic response against encapsulation materials results in drastically reduced viability of encapsulated cells, presenting a major engineering challenge for biocompatibility. Here, we show that the multi-laminate electrospun retrievable macrodevice (Bio-Spun) protects genetically modified human cells after subcutaneous implant in mice. We describe here a biocompatible nanofiber device that limits fibrosis and extends implant survival. For more than 150 days, these devices supported human cells engineered to secrete the antibodies: vedolizumab, ustekinumab, and adalimumab, while eliciting minimal fibrotic response in mice. The porous electrospun cell chamber allowed secretion of the recombinant antibodies into the host bloodstream, and prevented infiltration of host cells into the chamber. High plasma levels (>50 μg/mL) of antibody were maintained in the optimized devices for more than 5 months. Our findings demonstrate that macrodevices constructed from electrospun materials are effective in protecting genetically engineered cells for the sustained administration of recombinant therapeutic antibodies.

Hydrogel-Bondable Asymmetric Planar Membranes with Hierarchical Pore Structures for Cell Scaffolding and Encapsulation

Biomaterials for cell replacement therapy could facilitate the delivery, function, and retrieval of transplanted therapeutic cells. However, the limited capacity to accommodate a sufficient quantity of cells in biomedical devices has hindered the success of clinical application, resulting from the suboptimal spatial organization of cells and insufficient permeation of nutrients in the materials. Herein, through the immersion-precipitation phase transfer (IPPT) process from polyether sulfone (PES), we develop planar asymmetric membranes with a hierarchical pore architecture spanning from nanopores (∼20 nm) in the dense skin and open-ended microchannel arrays with gradient pore size increasing vertically from microns to ∼100 μm. The nanoporous skin would be an ultrathin diffusion barrier, while the microchannels could support high-density cell loading by acting as separate chambers allowing uniform distribution of cells in the scaffold. Alginate hydrogel could permeate into the channels and form a sealing layer after gelation, which could slow down the invasion of host immune cells into the scaffold. The hybrid thin-sheet encapsulation system (∼400 μm thick) could protect allogeneic cells over half-year after intraperitoneal (IP) implantation in immune-competent mice. Such structural membranes and plastic-hydrogel hybrids of thin dimensions could find important applications in cell delivery therapy.

Fluorescence-Amplified Origami Microneedle Device for Quantitatively Monitoring Blood Glucose

Exploration of clinically acceptable blood glucose monitors has been engaging in the past decades, yet the ability to quantitatively detect blood glucose in a painless, accurate, and highly sensitive manner remains limited. Herein, a fluorescence-amplified origami microneedle (FAOM) device is described that integrates tubular DNA-origami nanostructures and glucose oxidase molecules into its inner network to quantitatively monitor blood glucose. The skin-attached FAOM device can collect glucose molecules in situ and transfer the input into a proton signal after the oxidase's catalysis. The proton-driven mechanical reconfiguration of DNA-origami tubes separates fluorescent molecules and their quenchers, eventually amplifying the glucose-correlated fluorescence signal. The function equation established on clinical examinees suggests that FAOM can report blood glucose in a highly sensitive and quantitative manner. In clinical blind tests, the FAOM achieves well-matched accuracy (98.70 ± 4.77%) compared with a commercial blood biochemical analyzer, fully meeting the requirements of accurate blood glucose monitoring. The FAOM device can be inserted into skin tissue in a trivially painful manner and with minimal leakage of DNA origami, substantially improving the tolerance and compliance of the blood glucose test.

Directed self-assembly of a xenogeneic vascularized endocrine pancreas for type 1 diabetes

Intrahepatic islet transplantation is the standard cell therapy for β cell replacement. However, the shortage of organ donors and an unsatisfactory engraftment limit its application to a selected patients with type 1 diabetes. There is an urgent need to identify alternative strategies based on an unlimited source of insulin producing cells and innovative scaffolds to foster cell interaction and integration to orchestrate physiological endocrine function. We previously proposed the use of decellularized lung as a scaffold for β cell replacement with the final goal of engineering a vascularized endocrine organ. Here, we prototyped this technology with the integration of neonatal porcine islet and healthy subject-derived blood outgrowth endothelial cells to engineer a xenogeneic vascularized endocrine pancreas. We validated ex vivo cell integration and function, its engraftment and performance in a preclinical model of diabetes. Results showed that this technology not only is able to foster neonatal pig islet maturation in vitro, but also to perform in vivo immediately upon transplantation and for over 18 weeks, compared to normal performance within 8 weeks in various state of the art preclinical models. Given the recent progress in donor pig genetic engineering, this technology may enable the assembly of immune-protected functional endocrine organs.

Chemically engineering cells for precision medicine

Cell-based therapy holds great potential to address unmet medical needs and revolutionize the healthcare industry, as demonstrated by several therapeutics such as CAR-T cell therapy and stem cell transplantation that have achieved great success clinically. Nevertheless, natural cells are often restricted by their unsatisfactory in vivo trafficking and lack of therapeutic payloads. Chemical engineering offers a cost-effective, easy-to-implement engineering tool that allows for strengthening the inherent favorable features of cells and confers them new functionalities. Moreover, in accordance with the trend of precision medicine, leveraging chemical engineering tools to tailor cells to accommodate patients individual needs has become important for the development of cell-based treatment modalities. This review presents a comprehensive summary of the currently available chemically engineered tools, introduces their application in advanced diagnosis and precision therapy, and discusses the current challenges and future opportunities.

A porcine islet-encapsulation device that enables long-term discordant xenotransplantation in immunocompetent diabetic mice

Islet transplantation is an effective treatment for type 1 diabetes (T1D). However, a shortage of donors and the need for immunosuppressants are major issues. The ideal solution is to develop a source of insulin-secreting cells and an immunoprotective method. No bioartificial pancreas (BAP) devices currently meet all of the functions of long-term glycemic control, islet survival, immunoprotection, discordant xenotransplantation feasibility, and biocompatibility. We developed a device in which porcine islets were encapsulated in a highly stable and permeable hydrogel and a biocompatible immunoisolation membrane. Discordant xenotransplantation of the device into diabetic mice improved glycemic control for more than 200 days. Glycemic control was also improved in new diabetic mice "relay-transplanted" with the device after its retrieval. The easily retrieved devices exhibited almost no adhesion or fibrosis and showed sustained insulin secretion even after the two xenotransplantations. This device has the potential to be a useful BAP for T1D.

Tissue engineering approaches and generation of insulin-producing cells to treat type 1 diabetes

Tissue engineering (TE) has become a new effective solution to a variety of medical problems, including diabetes. Mesenchymal stem cells (MSCs), which have the ability to differentiate into endodermal and mesodermal cells, appear to be appropriate for this function. The purpose of this review was to evaluate the outcomes of various researches on the insulin-producing cells (IPCs) generation from MSCs with TE approaches to increase efficacy of type 1 diabetes treatments. The search was performed in PubMed/Medline, Scopus and Embase databases until 2021. Studies revealed that MSCs could also differentiate into IPCs under certain conditions. Therefore, a wide range of protocols have been used for this differentiation, but their effectiveness is very different. Scaffolds can provide a microenvironment that enhances the MSCs to IPCs differentiation, improves their metabolic activity and up-regulate pancreatic-specific transcription factors. They also preserve IPCs architecture and enhance insulin production as well as protect against cell death. This systematic review offers a framework for prospective research based on data. In vitro and in vivo evidence suggests that scaffold-based TE can improve the viability and function of IPCs.

Fabrication of nanofibrous mat surrounded hydrogel scaffold as an encapsulation device for encapsulating pancreas β cells

The main barriers to cells or organ transplantation such as pancreatic β-cells are the need for lifelong immune suppression and the shortage of donors. It may be overcome via cell encapsulation and transplantation techniques. Hydrogels provide a suitable ECM-like microenvironment for cells to adhere, survive, and function, while weakly performing as an immune barrier. In this study, we aimed to macro-encapsulate islet cells in a dual encapsulation device with collagen hydrogel and PCL nanofiber to provide an immune-isolated environment for cells to function more efficiently, where immune cells are not allowed to enter but oxygen, insulin, and nutrients can pass through. PCL thin mats with the pores diameter of 500 nm were synthesized by electrospinning and characterized by scanning electron microscope, porosity measurement, tensile strength test, and contact angle measurement. Collagen hydrogel was fabricated by extracting collagen fibers from rat tail tendons and solving them in acetic acid. β-cells (CRI-D2 cell line) encapsulated after neutralizing collagen solution (pH ≈ 7.4). Cell-collagen gel complex was poured into the nanofibrous mat packets to fabricate the whole device. Histology evaluation, cell viability, and cell function tests were done in 10 days. Live/dead assay of Cri-D2 cells encapsulated within the device showed that cells have diffuse distribution at the core of the hydrogel and the device. Also, cluster formation was seen and shows these cells can live in groups. To identify cells' function within the device in these 10 days samples' supernatant insulin level was measured by chemiluminescent immunoassay. It just showed a positive result for existing insulin within the medium. Based on our results, this device presents adequate features to be a good immune-isolation device for cell transplanting.

Mouse models and human islet transplantation sites for intravital imaging

Human islet transplantations into rodent models are an essential tool to aid in the development and testing of islet and cellular-based therapies for diabetes prevention and treatment. Through the ability to evaluate human islets in an in vivo setting, these studies allow for experimental approaches to answer questions surrounding normal and disease pathophysiology that cannot be answered using other in vitro and in vivo techniques alone. Intravital microscopy enables imaging of tissues in living organisms with dynamic temporal resolution and can be employed to measure biological processes in transplanted human islets revealing how experimental variables can influence engraftment, and transplant survival and function. A key consideration in experimental design for transplant imaging is the surgical placement site, which is guided by the presence of vasculature to aid in functional engraftment of the islets and promote their survival. Here, we review transplantation sites and mouse models used to study beta cell biology in vivo using intravital microscopy and we highlight fundamental observations made possible using this methodology.

Engineering a Hierarchical Biphasic Gel for Subcutaneous Vascularization

Implanted cell-containing grafts require a robust and functional vasculature to supply oxygen and nutrients, as well as clear metabolic waste products. However, it remains challenging to fabricate tunable, vascular-promoting scaffolds without incorporating additional biologics. Here, a biphasic gel consisting of a highly porous aerogel and a degradable fibrin hydrogel for inducing vascularization is presented. The highly porous (>90%) and stable aerogel is assembled from short microfibers by being dispersed in an aqueous solution that can be 3D printed into various configurations. The biphasic gel demonstrates good compression-resistance: 70.30% Young's modulus is recovered over 20 cycles of 65% compression under water. Furthermore, it is confirmed that tissue cells and blood vessels can penetrate a thick (≈3 mm) biphasic gel in the subcutaneous space of mice. Finally, the biphasic gel doubles the vascular ingrowth compared to a composite of a commercial surgical polyester felt and a fibrin hydrogel upon subcutaneous implantation in mice after 4 weeks. The design of this biphasic gel may advance the development of vascularized scaffolds.

Benefits and Hurdles of Pancreatic β-Cell Replacement

Insulin represents a life-saving treatment in patients with type 1 diabetes, and technological advancements have improved glucose control in an increasing number of patients. Despite this, adequate control is often still difficult to achieve and insulin remains a therapy and not a cure for the disease. β-cell replacement strategies can potentially restore pancreas endocrine function and aim to maintain normoglycemia; both pancreas and islet transplantation have greatly progressed over the last decades and, in subjects with extreme glycemic variability and diabetes complications, represent a concrete and effective treatment option. Some issues still limit the adoption of this approach on a larger scale. One is represented by the strict selection criteria for the recipient who can benefit from a transplant and maintain the lifelong immunosuppression necessary to avoid organ rejection. Second, with regard to islet transplantation, up to 40% of islets can be lost during hepatic engraftment. Recent studies showed very preliminarily but promising results to overcome these hurdles: the ability to induce β-cell maturation from stem cells may represent a solution to the organ shortage, and the creation of semi-permeable membranes that envelope or package cells in either micro- or macro- encapsulation strategies, together with engineering cells to be hypo-immunogenic, pave the way for developing strategies without immunosuppression. The aim of this review is to describe the state of the art in β-cell replacement with a focus on its efficacy and clinical benefits, on the actual limitations and still unmet needs, and on the latest findings and future directions.

Cell delivery systems: Toward the next generation of cell therapies for type 1 diabetes

Immunoprotection and oxygen supply are vital in implementing a cell therapy for type 1 diabetes (T1D). Without these features, the transplanted islet cell clusters will be rejected by the host immune system, and necrosis will occur due to hypoxia. The use of anti-rejection drugs can help protect the transplanted cells from the immune system; yet, they also may have severe side effects. Cell delivery systems (CDS) have been developed for islet transplantation to avoid using immunosuppressants. CDS provide physical barriers to reduce the immune response and chemical coatings to reduce host fibrotic reaction. In some CDS, there is architecture to support vascularization, which enhances oxygen exchange. In this review, we discuss the current clinical and preclinical studies using CDS without immunosuppression as a cell therapy for T1D. We find that though CDS have been demonstrated for their ability to support immunoisolation of the grafted cells, their functionality has not been fully optimized. Current advanced methods in clinical trials demonstrate the systems are partly functional, physically complicated to implement or inefficient. However, modifications are being made to overcome these issues.

Stepwise differentiation of functional pancreatic β cells from human pluripotent stem cells

Pancreatic β cells differentiated from stem cells provide promise for cell replacement therapy of diabetes. Human pluripotent stem cells could be differentiated into definitive endoderm, followed by pancreatic progenitors, and then subjected to endocrinal differentiation and maturation in a stepwise fashion. Many achievements have been made in making pancreatic β cells from human pluripotent stem cells in last two decades, and a couple of phase I/II clinical trials have just been initiated. Here, we overview the major progresses in differentiating pancreatic β cells from human pluripotent stem cells with the focus on recent technical advances in each differentiation stage, and briefly discuss the current limitations as well.

Engineered immunomodulatory accessory cells improve experimental allogeneic islet transplantation without immunosuppression

Islet transplantation has been established as a viable treatment modality for type 1 diabetes. However, the side effects of the systemic immunosuppression required for patients often outweigh its benefits. Here, we engineer programmed death ligand-1 and cytotoxic T lymphocyte antigen 4 immunoglobulin fusion protein-modified mesenchymal stromal cells (MSCs) as accessory cells for islet cotransplantation. The engineered MSCs (eMSCs) improved the outcome of both syngeneic and allogeneic islet transplantation in diabetic mice and resulted in allograft survival for up to 100 days without any systemic immunosuppression. Immunophenotyping revealed reduced infiltration of CD4+ or CD8+ T effector cells and increased infiltration of T regulatory cells within the allografts cotransplanted with eMSCs compared to controls. The results suggest that the eMSCs can induce local immunomodulation and may be applicable in clinical islet transplantation to reduce or minimize the need of systemic immunosuppression and ameliorate its negative impact.

Microfluidic Production of Zwitterion Coating Microcapsules with Low Foreign Body Reactions for Improved Islet Transplantation

Islet transplantation is a promising strategy for type 1 diabetes mellitus (T1DM) treatment, whereas implanted-associated foreign body reaction (FBR) usually induces the necrosis of transplanted islets and leads to the failure of glycemic control. Benefiting from the excellent anti-biofouling property of zwitterionic materials and their successful application in macroscopic implanted devices, microcapsules with zwitterionic coatings may be promising candidates for islet encapsulation. Herein, a series of zwitterion-coated core-shell microcapsules is fabricated (including carboxybetaine methacrylate [CBMA]-coated gelatin methacrylate [GelMA] [CBMA-GelMA], sulfobetaine methacrylate [SBMA]-coated GelMA [SBMA-GelMA], and phosphorylcholine methacrylate [MPC]-coated GelMA [MPC-GelMA]) by one-step photopolymerization of inner GelMA and outer zwitterionic monomers via a handmade two-fluid microfluidic device and it is demonstrated that they can effectively prevent protein adsorption, cell adhesion, and inflammation in vitro. Interestingly, the zwitterionic microcapsules successfully resist FBR in C57BL/6 mice after intraperitoneal implantation for up to 4 months. After successfully encapsulating xenogeneic rat islets in the SBMA-GelMA microcapsules, sustained normoglycemia is further validated in streptozotocin (STZ)-induced mice for up to 3 months. The zwitterion-modified microcapsule using a microfluidic device may represent a platform for cell encapsulation treatment for T1DM and other hormone-deficient diseases.

Therapeutic Effects of Insulin-Producing Human Umbilical Cord-Derived Mesenchymal Stem Cells in a Type 1 Diabetes Mouse Model

In patients with type 1 diabetes (T1D), compromised pancreatic β-cell functions are compensated through daily insulin injections or the transplantation of pancreatic tissue or islet cells. However, both approaches are associated with specific challenges. The transplantation of mesenchymal stem cells (MSCs) represents a potential alternative, as MSCs have tissue-forming capacity and can be isolated from various tissues. The human umbilical cord (hUC) is a good source of freely available MSCs, which can be collected through pain-free, non-invasive methods subject to minimal ethical concerns. We sought to develop a method for the in vitro generation of insulin-producing cells (IPCs) using MSCs. We examined the potential therapeutic uses and efficacy of IPCs generated from hUC-derived MSCs (hUC-IPCs) and human adipose tissue (hAD)-derived MSCs (hAD-IPCs) through in vitro experiments and streptozotocin (STZ)-induced C57BL/6 T1D mouse models. We discovered that compared to hAD-IPCs, hUC-IPCs exhibited a superior insulin secretion capacity. Therefore, hUC-IPCs were selected as candidates for T1D cell therapy in mice. Fasting glucose and intraperitoneal glucose tolerance test levels were lower in hUC-IPC-transplanted mice than in T1D control mice and hAD-IPC-transplanted mice. Our findings support the potential use of MSCs for the treatment of T1D.

Recent advances in biomaterial-assisted cell therapy

With the outstanding achievement of chimeric antigen receptor (CAR)-T cell therapy in the clinic, cell-based medicines have attracted considerable attention for biomedical applications and thus generated encouraging progress. As the basic construction unit of organisms, cells harbor low immunogenicity, desirable compatibility, and a strong capability of crossing various biological barriers. However, there is still a long way to go to fix significant bottlenecks for their clinical translation, such as facile preparation, strict stability requirements, scale-up manufacturing, off-target toxicity, and affordability. The rapid development of biotechnology and engineering approaches in materials sciences has provided an ideal platform to assist cell-based therapeutics for wide application in disease treatments by overcoming these issues. Herein, we survey the most recent advances of various cells as bioactive ingredients and outline the roles of biomaterials in developing cell-based therapeutics. Besides, a perspective of cell therapies is offered with a particular focus on biomaterial-involved development of cell-based biopharmaceuticals.

Emerging local immunomodulatory strategies to circumvent systemic immunosuppression in cell transplantation

INTRODUCTION

Cell transplantation is a promising curative therapeutic strategy whereby impaired organ functions can be restored without the need for whole organ transplantation. A key challenge in allotransplantation is the requirement for life-long systemic immunosuppression to prevent rejection, which is associated with serious adverse effects such as increased risk of opportunistic infections and the development of neoplasms. This challenge underscores the urgent need for novel strategies to prevent graft rejection while abrogating toxicity-associated adverse events.

AREAS COVERED

We review recent advances in immunoengineering strategies for localized immunomodulation that aim to support allograft function and provide immune tolerance in a safe and effective manner.

EXPERT OPINION

Immunoengineering strategies are tailored approaches for achieving immunomodulation of the transplant microenvironment. Biomaterials can be adapted for localized and controlled release of immunomodulatory agents, decreasing the effective dose threshold and frequency of administration. The future of transplant rejection management lies in the shift from systemic to local immunomodulation with suppression of effector and activation of regulatory T cells, to promote immune tolerance.

3D Printing Mini-Capsule Device for Islet Delivery to Treat Type 1 Diabetes

Transplantation of encapsulated islets has been shown to hold a promising potential treatment for type 1 diabetes (T1D). However, there are several obstacles to overcome, such as immune rejection by the host of the grafts, sustainability of islet function, and retrievability or replacement of the encapsulated system, hinder their clinical applications. In this study, mini-capsule devices containing islets were fabricated by using digital light processing (DLP) 3D printing. To ensure a high survival rate and low immunogenicity of the fabricated islets, 20s was selected as the most suitable printing condition. Meanwhile, the mini-capsule devices with a groove structure were fabricated to prevent islet cells leakage. Subcutaneous transplantations of encapsulated islets in immunocompetent C57BL/6 mice indicated significant improvement in the symptoms of streptozotocin-induced hyperglycemia without any immunosuppression treatment for at least 15 weeks. In vivo intraperitoneal glucose tolerance tests (IPGTT) performed at different time points demonstrated therapeutically relevant glycemic ameliorate of the device. The implants retrieved after 15 weeks still contained viable and adequate numbers of islet cells. The results of this study indicate that the proposed mini-capsule device can deliver sufficient islet cell mass, prevent islet cells leakage, and maintain long-term cell survival while allowing easy retrieval. Furthermore, the proposed encapsulated islets may help with T1D cellular treatment by overcoming the obstacles of islet transplantation.

Integrating Additive Manufacturing Techniques to Improve Cell-Based Implants for the Treatment of Type 1 Diabetes

The increasing global prevalence of endocrine diseases like type 1 diabetes mellitus (T1DM) elevates the need for cellular replacement approaches, which can potentially enhance therapeutic durability and outcomes. Central to any cell therapy is the design of delivery systems that support cell survival and integration. In T1DM, well-established fabrication methods have created a wide range of implants, ranging from 3D macro-scale scaffolds to nano-scale coatings. These traditional methods, however, are often challenged by their inherent limitations in reproducible and discrete fabrication, particularly when scaling to the clinic. Additive manufacturing (AM) techniques provide a means to address these challenges by delivering improved control over construct geometry and microscale component placement. While still early in development in the context of T1DM cellular transplantation, the integration of AM approaches serves to improve nutrient material transport, vascularization efficiency, and the accuracy of cell, matrix, and local therapeutic placement. This review highlights current methods in T1DM cellular transplantation and the potential of AM approaches to overcome these limitations. In addition, emerging AM technologies and their broader application to cell-based therapy are discussed.